Scribd Logo
Upload

Welcome to Scribd!

  • 47 views

    MEPL 电厂 1#胶球清洗试运情况说明 Mepl unit #1 rubber ball cleaning trial running condition

    Uploaded by

    kumarmm1234
    1. A trial run of the rubber ball cleaning system for MEPL power plant Unit #1 was conducted on August 11, 2012. The ball collection rates were 77% for system A and 72% for system B. 2. The main reasons for the low ball collection rates were equipment issues like screens not closing tightly, and system issues like dead angles in the condenser water chamber where balls got stuck. 3. To solve the problem, it is recommended to ensure clean circulating water since the system issues cannot be controlled by the equipment manufacturer. Putting more balls in the system would also help since the balls would stop accumulating once the condenser chamber reached a certain level of balls.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd

    MEPL 电厂 1#胶球清洗试运情况说明 Mepl unit #1 rubber ball cleaning trial running condition

    Uploaded by

    kumarmm1234
    47 views3 pages
    1. A trial run of the rubber ball cleaning system for MEPL power plant Unit #1 was conducted on August 11, 2012. The ball collection rates were 77% for system A and 72% for system B. 2. The main reasons for the low ball collection rates were equipment issues like screens not closing tightly, and system issues like dead angles in the condenser water chamber where balls got stuck. 3. To solve the problem, it is recommended to ensure clean circulating water since the system issues cannot be controlled by the equipment manufacturer. Putting more balls in the system would also help since the balls would stop accumulating once the condenser chamber reached a certain level of balls.

    Original Description:

    MKOIP

    Original Title

    MKJUK

    Copyright

    © © All Rights Reserved

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1. A trial run of the rubber ball cleaning system for MEPL power plant Unit #1 was conducted on August 11, 2012. The ball collection rates were 77% for system A and 72% for system B. 2. The main reasons for the low ball collection rates were equipment issues like screens not closing tightly, and system issues like dead angles in the condenser water chamber where balls got stuck. 3. To solve the problem, it is recommended to ensure clean circulating water since the system issues cannot be controlled by the equipment manufacturer. Putting more balls in the system would also help since the balls would stop accumulating once the condenser chamber reached a certain level of balls.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    47 views3 pages

    MEPL 电厂 1#胶球清洗试运情况说明 Mepl unit #1 rubber ball cleaning trial running condition

    Uploaded by

    kumarmm1234
    1. A trial run of the rubber ball cleaning system for MEPL power plant Unit #1 was conducted on August 11, 2012. The ball collection rates were 77% for system A and 72% for system B. 2. The main reasons for the low ball collection rates were equipment issues like screens not closing tightly, and system issues like dead angles in the condenser water chamber where balls got stuck. 3. To solve the problem, it is recommended to ensure clean circulating water since the system issues cannot be controlled by the equipment manufacturer. Putting more balls in the system would also help since the balls would stop accumulating once the condenser chamber reached a certain level of balls.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    of 3

    MEPL 1#

    MEPL unit #1 rubber ball cleaning trial running


    condition

    1 trail running condition


    1#
    A B

    put collec put collec
    t t
    8/11/1 100 77 100 72
    2

    2 Analysis

    The main reasons for low


    rubber ball collection rate as following :
    1 Equipment problem:

    a. Ball collection screen is not


    tight and ball run away
    b. Other parts have

    problemsystem can not operate normally.

    2 System problem

    a. There is dead angle


    inside water chamber of condenser; rubber ball is jammed in
    the dead angle.
    b. There is eddy
    flow while cycle water is inside water chamber, which makes
    ball packing inside water chamber
    c.
    There is air on top part of condenser water chamber, which
    makes ball rising and packing in top part of chamber
    d. There is garbage inside
    cycle water which makes ball pacing inside chamber

    . The main reason


    for low rubber ball collection rate is system problem.
    Ball stays inside condenser water
    chamber.

    3 Solutions

    This is caused by system reason;


    manufacture can not control it. We suggest taking measures to
    guarantee cycle water is clean.

    As the
    equipment has no problem, ball will not disappear. Put ball
    some more times, when the quantity of ball stay inside water
    chamber become to a certain degree, there will be no more
    ball can stay inside water chamber.

    4. Conclusion

    Total system meet operation requirement



    2012-11-9

    You might also like