sasmira

For Details Contact :

Director

The Synthetic & Art Silk Mills Research Association

Sasmira Marg, Worli, Mumbai - 400030
Tel.: 24935351/2 Fax : 91-22-24930225
E-mail : [email protected] or [email protected]
www.sasmira.org Testing Services
 Quality Policy
4 To offer accurate, reliable and reproducible testing services to the customers.
4 To ensure customer satisfaction.
4 To implement Quality Management System as per ISO/IEC 17025:2005(E)
Introduction and the criteria of accreditation body.

The Synthetic and Art Silk Mills' Research Association is a cooperative venture
set up by decentralized textiles industry of India as multifunctional institute on
12th January 1950.

sasmira is engaged in multifarious activities with the prime objective of

rendering scientific and technical assistance to textiles industry.

sasmira assists industry by offering technically trained manpower, Technical

consultancy, Research findings, testing facilities, Reference library and
information services. Situated at a strategic location in Worli, it is easily
approachable both from suburbs and metropolis.
Objectives
4 Ensuring adequate competency level of the staff.
4 Using latest national and international or validated in house test methods.
4 Using modern equipment/ calibrated instruments to offer quality-testing services.
4 Ensuring adequate corrective action on complaints.
Sasmira offers following services: 4
4
Ensuring effectiveness of quality system implemented.
Ensuring updating of the Quality System.
4 Testing and Technical Services 4 To participate in inter-laboratory / proficiency testing
4 Technical textiles and Agro textiles in particular
4 Testing Instrumentation The laboratory shall maintain an effective quality assurance system with total
4 Manpower Training commitment of the management and involving all the members of the staff.
4 Research and Development
4 Techno Economic Consultancy
4 Information and publications of Technical nature
Testing and
Technical Services Testing and Technical Services
One of the Prime activities of SASMIRA since inception.
Since 2004, NABL Accredited for Mechanical and Chemical Testing of Textile and Allied
sasmira undertakes testing of physical and chemical properties of all textiles,
substrates.
including technical textiles and allied materials under standard conditions.
Testing laboratories are NABL accredited as per ISO 17025: 2005. Equipped with state-of-the-art testing equipment. The tests are performed by a team of
skilled and experienced staff who undergo continual training and upgradation of their
sasmira, being identified as Centre of Excellence for Agrotextile, is equipped skills, thus ensuring the highest level of consistent, reliable and accurate analysis to
to undertake speciality property testing of the technical fabrics. promptly serve the needs of the industry in the best possible manner.

Samples are received from exporters and importers, manufacturers of fibre to fabric
sasmira laboratories undertake Technical Services for: (wovens, non-wovens, knitted and technical textiles) dyestuffs, textile auxilaries,
4 Fabric defect analysis and prevention.
Government Institutions and Defence Establishment, Public and Private Sector Clients.
4 Fabric structure and design analysis.
4 Product standardization. Besides routine testing, Technical Services and Consultancy is also a forte including
4 Computer aided textiles design. Defect analysis, on-site quality check, product certification, troubleshooting, etc.
4 Analysis of technical pertaining to manufacturing, processing &
finishing.
4 Suggestion to improve quality on the above.
4 Suggestions to improve productivity.
4 Fabric strength & design analysis.

Similar services are also available at sasmira's Powerloom Service Centres

at Bhiwandi.
 Geotextiles and Technical Textiles
S.No. Test Parameter Std Test Method Charges (Rs.)

1 Tensile Strength- SHIMADZU 400.00

AG10 TG m/c IS 1969 400.00
4Cord ASTM D 5034/5035 400.00
4Webbings IS 2965 400.00
4Braided nylon IS 4227 400.00
4Rope 400.00

Mechanical Testing
4Coated fabric 400.00
2 Grab test (Geotextiles) ASTM D 4632 400.00
3 Wide width Breaking strength ASTM D 4595 1000.00
Woven / Nonwoven
sasmira has a full fledged state-of-the-art laboratory for the testing of physical
4 Trapezoid Tearing strength of ASTM D 4533 500.00
properties of textiles (fibre/yarn/fabric) and, also has a special set up for the (Geotextiles)
testing of technical textiles in general, and agro textiles in particular. 5 Abrasion Resistance ASTM D4966
Martindale Tester
The mechanical testing section caters to full range of testing from basic 4Upto 10,000 Rubs 400.00
parameters such as count, construction, to the more specialized testing such as 4Upto 15000 Rubs 600.00
water vapour permeability, UV exposure, wide width tensile strength testing, 4Upto 20,000 Rubs 800.00
Extra amt for every additional 300.00
etc. The range of samples encompasses from apparels to upholstery; 10,000rubs
nonwovens; geotextiles and also automotive textiles. 6 Taber abrasion Test ASTM D 3884 750.00
7 Apparent Opening Size (AOS) ASTM D 4751 500.00
Few key testing instruments: Universal Testing Machine, Air Permeability of Geotextiles.
Tester, Bursting Tester, Thermal Conductivity tester, Yarn-to-yarn and yarn-to- 8 Air Permeability (upto 10") ASTM D 737 350.00
metal Friction Tester, Vibroskop, Yarn evenness tester, besides the routine 9 Flexing Abrasion (Schildknecht) IS 7016 part 4 500.00
10 Index Puncture Resistance ASTM D4833 500.00
testing equipments like Wrap reel, Crease recovery tester, Twist tester, etc.
11 Adhesion of Coating IS 7016 part 5 500.00
12 Resistance to flame IS 1259 300.00
Testing as per Standard test methods (IS/ASTM/AATCC/ISO-DIN/SAE) or
13 Resistance to heat and loss IS 1259 400.00
customized testing. Tailor-made testing is also possible as per customer's of mass of coating
requirement. Results are delivered promptly and accurately. 14 Exposure to UV
4For 500 hours ASTM G 154 20,000.00
With the blend of all these qualities, the testing services stand apart, as we 4Every additional 100 hours 5000.00
strive to achieve the highest level of excellence in the field of testing. or part thereof
15 Exposure to Xenon arc ASTM D 4355
For 500 hrs 20,000.00
Every additional 100 hours 5000.00
or part thereof
16 Cone drop (Geotextiles) IS 13162 Part 4 350.00
BSEN 918
17 CBR Puncture resistance ASTM D 4833 500.00
18 Water permeability by Permittivity- ASTM D 4491 500.00
Cross plane (Geotextiles)
S.No. Test Parameter Std Test Method Charges (Rs.)

38 Water testing
4pH 200.00
4Total solids 200.00
4Chlorides 200.00
4Sulphates 200.00
4Hardness (calcium and
magnesium)
4Total Hardness
200.00
Chemical Testing
200.00
4Acidity or alkalinity
4Iron content
4Cu content
200.00
200.00
200.00
and Analytical Services
4Mn content 200.00 Chemical testing includes identification, blend analysis, entire range of colour
39 COD IS 3025 part 58 600.00 fastness of dyed fabrics, shrinkage, amongst others. Apparels, upholstery;
BOD IS 3025 Part 44 800.00 nonwovens; geotextiles and also automotive textiles are routinely tested.
4 Recommended (Minimum) size of sample: 1 mtr. X Full width or more depending on the
The laboratory has all equipments for Colour Fastness tests - Light Fastness
number of test parameters.
4 In case of Garment and Made-ups-:1 full unit. Tester cum weatherometer fastness, Launderometer, Crockmeter, Sublimation
4 Dyes / Pigment in sealed condition: 10 gms fastness tester, Perspirometers. Besides these, the lab is also well equipped
4 Urgent services are available for some tests at EXTRA Charge.
with Computer Colour Measurement spectrophotometer, Fully automatic
4 Extra charge of Rs 100/- for individual reading/ computer printout.
4 Service and cess tax extra as applicable. washing machine, Padding mangles, curing chamber, thermostatic ovens,
environmental and humidity chamber, Infra-red and glycerin bath High

Non - Woven Testing temperature-pressure dyeing equipments specially for the dyeing of polyester
and synthetics. Analytical testing is supported by FTIR Spectrophotometer and
Differential Scanning and Thermal analyser.
S.No. Test Parameter Std Test Method Charges (Rs.)
Testing as per Standard test methods (IS/ASTM/AATCC/ISO-DIN/SAE). As per
1 Absorbency Drop method 200.00 request, the lab also undertakes customised testing. Special emphasis is given
2 Weight per square metre IS 1964 100.00 towards accurate, reliable and timely results.
3 Wettability 200.00
4 Breaking strength IS 1969 / ASTM D 5035 500.00
5 Water permeability ASTM D 4491 500.00
6 Identification of material IS 667 200.00
7 Liquid strike rate In House Method 400.00

4 Recommended (Minimum) size of sample : 2.5 sq meters

4 Urgent services are available for some tests at EXTRA Charge.
4 Extra charge of Rs 100/- for individual reading/ computer printout.
4 Service and cess tax extra as applicable.
Physical Parameters Testing Services
Man-Made Fibers and Polymers
S.No. Test Parameter Std Test Method Charges (Rs.) S.No. Test Parameter Std Test Method Charges (Rs.)

1 Moisture content IS 199 200.00 15 Color fastness to Dry Cleaning: IS 4802, AATCC132 300.00
2 Mean Fiber length IS 10014 (PT 1) 300.00 16 Color fastness to organic solvent IS 688: ISO 105-X05 300.00
ASTM D 5103, 17 Color fastness to saliva and IS 15626 300.00
3 Linear density (Denier) ASTM D 1577 250.00 perspiration
4 Fiber strength ASTM D 3379, 3822 500.00 18 Color fastness to Bleaching: IS 762, IS 763 300.00
5 Fiber diameter Microscopic method 300.00 19 Color fastness to laundering AATCC-61 / ISO 105 C06 400.00
6 % Hollowness Microscopic method 400.00 (Home or commercial)
7 Crimps per cm ASTM D 3937 200.00 20 pH of aqueous Extract IS 1390 200.00
8 Intrinsic Viscosity (IV) By Ubbelohde Viscometer 1200.00 21 Residual starch on bleached fabric IS 1967 300.00
9 Melting Point Hot plate method 200.00 22 Removal of non fibrous matter: IS 9068 300.00
10 % Spin finish IS 9068 400.00 23 Oil, fats and waxes 300.00
11 Oligomer content In-house method 800.00 24 Water soluble matter (Cold /Hot) IS 3456 300.00
12 Hot air shrinkage ASTM D 2102 350.00 25 Estimation of
13 Boiling water shrinkage ASTM D 2102 350.00 4Ash IS 199 300.00
4Finish 300.00
4 Recommended (Minimum) size of sample : 250 gms. 4Fatty matter 300.00
4 Urgent services are available for some tests at EXTRA Charge. 4Starch 300.00
4 Service and cess tax extra as applicable. 4Alkali content 300.00
4Total Size 300.00
In grey and finished cotton
fabric
26 Scouring loss IS 1383 300.00
Physical Parameters 27
In grey and finished cotton fabric
Chloride content IS 4202 300.00
28 Sulphate content IS 4203 400.00
Fibre : Wool 29 Viscosity (Gums and liquids) Brookfield method 350.00
30 Identification of dyes IS 4472 (Part -I /II /III) 300.00/dye
Std Test Method Charges (Rs.) 31 Wettability IS 2349 200.00
S.No. Test Parameter
32 Dimensional changes of woven and
knitted fabric
1 Moisture content IS 6637 200.00
4Relaxation IS 2977, IS 665 250.00
ASTM - D 1576
4To washing AATCC 135, IS 1299 300.00
2 Fibre length IS 1377 300.00
4Every additional wash 100.00
3 Fibre strength IS 235 500.00
4On heating IS 12170 350.00
4 Fibre Diameter IS 744 300.00
32 Bundesmann Water test absorption IS 392 300.00
5 Wool Grade of fibre and Top IS 5910, 5911, 500.00
/ penetration
ASTM D 3991, 3992
33 Cone Test IS 7941 250.00
6 Linear Density ASTM D 1577 300.00
34 Spray Test IS 390 250.00
7 Mean length of staple fibers (from In-house method 550.00
yarns) 35 Flammability Tests:
4Inclined Plane IS 11871 300.00
4 Recommended (Minimum) size of sample : 250 gms. 4Vertical Plane IS 11871 300.00
4 Urgent services are available for some tests at EXTRA Charge. 36 Limiting oxygen Index IS 13501 1200.00
4 Service and cess tax extra as applicable. 37 Horizontal flammability FMVSS 302 750.00
Chemical Parameters: Physical Parameters
Fibres/ Yarn /Fabric Yarns
S.No. Test Parameter Std Test Method Charges (Rs.) S.No. Test Parameter Std Test Method Charges (Rs.)

1 Identification of fiber IS 667 150.00 1 Moisture content IS199 200.00

2 %Blend Composition IS /ISO/AATCC 2 Lea Count with CV% IS 1315 200.00
Two components 300.00 ASTM D 1907
Each additional component 150.00 3 Lea Strength IS 1671 200.00
3 COLOR SYSTEM (Spectrophotometer) 4 CSP (Count Strength Product) IS 1671, IS 1315 350.00
4Color difference 500.00 5 Single yarn Strength IS 1670, 325.00
4Comparison of strength 500.00 With elongation / Tenacity/ RKM IS 7703 (Part II)
of Fabrics ASTM D 2256
4Comparison of strength 500.00 6 Unevenness (U %) 300.00
of Dye stuff Yarn
4Reflectance Curve 500.00 Roving/ Sliver ASTM D 1425,
4Whiteness Index / 500.00 Extra charges for IS 7703-PartV (Filament yarn)
Yellowness evaluation Imperfection 250.00
4 Color fastness to washing Spectrograph 250.00
4at 400c (Test-I) ISO 105 C01 250.00 Individual values 50.00
4at 500c (Test-II) IS 3361, ISO 105 C02 250.00 7 Linear density of yarn IS 7703 ( part I) 200.00
4at 600c (Test-III) IS 764, ISO 105 C03 250.00 8 Twist per meter or inch IS 832 200.00
4at 900c (Test-IV) IS 765, ISO 105 C04 300.00 Including the direction of the twist
4at 950c (Test-V) IS 3417, ISO 105 C05 400.00 Single of plied / cable yarn ASTM D 1422
Extra charges of Rs 50.0 for extra Single yarn spun (twist /unit length)
washing of 30-minute duration. 9 Balance of Twist ASTM D 204 200.00
Washing with Multifibre fabric ISO 105 (C01 to C02) Extra Rs.100 10 Yarn appearance ASTM D 2255 IS 13260 200.00
5 Color fastness to light (Xenon lamp) IS/ISO method 11 Textured or Non-Textured yarn In-house method 400.00
Upto Blue wool 5 standard 700.00 12 Coefficient of Friction By Dynafil
Blue wool 6 standard 1400.00 Yarn to Yarn ASTM D 3412 700.00
Blue wool 7 standard 2800.00 Yarn to Metal ASTM D 3108 700.00
6 Color fastness to Xenon exposure AATCC method 13 Hot-air shrinkage ASTM D 2259 350.00
20 AFU 700.00 14 Boiling water shrinkage ASTM D 2259 350.00
40 AFU 1400.00 15 No. of filaments (Multifilament yarn) Visual 300.00
80 AFU 2800.00
100 AFU 3500.00 4 Recommended (Minimum) size of sample: 30 mini cones containing each of hank or
15 cones containing double hank.
7 Color fastness to Hot pressing-dry/ IS 689 200.00
4 Urgent services are available for some tests at EXTRA Charge.
wet /damp: AATCC 133 4 Service and cess tax extra as applicable.
8 Color fastness to Rubbing/Crocking IS 766, AATCC 8 ISO 105- X12 150.00
9 Color fastness to Organic solvent: IS- 688 300.00
10 Color fastness to shampooing IS 11969 300.00
11 Color fastness to sea water IS 690, ISO 105 EO2, AATCC 106 250.00
12 Color fastness to chlorinated IS 4803 300.00
pool water
13 Color fastness to Perspiration IS-971, AATCC 15 300.00
(Alkaline/acidic): ISO-E04
14 Color fastness to Water: IS 767, AATCC 107, ISO105:E01:94 200.00
Physical Parameters
Fabric : Woven and Knitted
S.No. Test Parameter Std Test Method Charges (Rs.) S.No. Test Parameter Std Test Method Charges (Rs.)

1 Moisture Content IS 199 200.00 17 Seam Slippage ASTM D 1683 500.00

2 Type of weave / knitting Visual Testing 200.00 Seam strength ISO 13936-1, ISO 13935-2 500.00
3 Width and Length IS 1954, 100.00 18 Peel bonding strength of coated IS 1259 500.00
ASTM D 3773 (each) fabric
ASTM D 3774 19 Water Vapor permeability ASTM E-96 700.00
4 Skew ness /Bowing of ASTM D 3882 200.00 20 Air permeability at 1.22" WHP Federal standard 200.00
Fabric/Garment AATCC 179 (Densometer)
5 Thickness of fabric/ carpet IS 7702, 125.00 21 Air permeability at low pressure IS 11056 200.00
ASTM D 1777 ASTM D 737
6 Threads per unit length IS 1963 125.00 22 Bursting Strength IS 1966 (Diaphragm Method) ASTM 250.00
(Reed and pick) ASTM D 3775 D 3786
7 Weight / sq meter & Weight / linear IS 1964 100.00 23 Pilling Resistance ASTM D 4970 300.00
meter IS 10971
8 Count of Warp and Weft yarn IS 3442 , IS 7703 150.00 24 Crease Recovery IS 4681 200.00
a) As received IS 9068 350.00 Dry /Wet AATCC 66 (Each)
b) After removal of added matter 25 Stiffness Test IS 6490 200.00
9 Cover factor Estimated 300.00 ASTM D 1388
10 % Crimp IS 3442 100.00 26 Drape Coefficient SDL method 350.00
11 Twist of the yarn removed from IS 832 200.00 27 Abrasion Resistance Abrasion -- ASTM D4966
fabric Martindale Tester
12 Tensile strength of fabric and IS 1969 350.00 Upto 10,000 Rubs ----do---- 400.00
elongation (Ravelled /cut / grab ASTM D 5034/5035 Upto 15000 Rubs ----do---- 600.00
strips) Upto 20,000 Rubs ----do---- 800.00
Cord IS 2965 Extra amt for every additional 300.00
Braided Nylon Cord IS 4227 10,000 rubs
IS0 13934-1/2 28 Flexing Abrasion Schildknecht IS 7016 part 4 500.00
%Elongation at break at specified 29 Taber abrasion test ASTM D 3884 750.00
load (extra) 30 Thermal Conductivity Sasmira tester 400.00
13 Tear strength-Elmendorf ASTM D 1424 300.00 31 Fabric Defect Analysis 4000.00
14 Tear strength-single rip ASTM D 2261 350.00
15 Tear strength- Double tongue IS 7016 350.00 4 Recommended (Minimum) size of sample: 1 mtr. X Full width or more depending
on the number of test parameters.
16 Tear strength- Trapezoid ASTM D 5587 350.00
4 In case of Garment and Made-ups :1 full unit.
4 Urgent services are available for some tests at EXTRA Charge.
4 Service and cess tax extra as applicable.