Scribd Logo
Upload

Welcome to Scribd!

  • 109 views

    AISC Requirements

    Uploaded by

    parag7676
    The document summarizes width-thickness ratio and slenderness ratio requirements for various structural elements from the AISC 341-05 and AISC 360-05 steel design codes. It provides the maximum allowed ratios for elements in beams, columns, braces, and links based on their loading condition and whether they are considered compact, noncompact, or seismically compact sections. Requirements are listed for structural shapes including I-shapes, channels, angles, round hollow structural sections, and pipes.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    AISC Requirements

    Uploaded by

    parag7676
    109 views1 page
    The document summarizes width-thickness ratio and slenderness ratio requirements for various structural elements from the AISC 341-05 and AISC 360-05 steel design codes. It provides the maximum allowed ratios for elements in beams, columns, braces, and links based on their loading condition and whether they are considered compact, noncompact, or seismically compact sections. Requirements are listed for structural shapes including I-shapes, channels, angles, round hollow structural sections, and pipes.

    Original Description:

    Summary of AISC Requirement

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document summarizes width-thickness ratio and slenderness ratio requirements for various structural elements from the AISC 341-05 and AISC 360-05 steel design codes. It provides the maximum allowed ratios for elements in beams, columns, braces, and links based on their loading condition and whether they are considered compact, noncompact, or seismically compact sections. Requirements are listed for structural shapes including I-shapes, channels, angles, round hollow structural sections, and pipes.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    109 views1 page

    AISC Requirements

    Uploaded by

    parag7676
    The document summarizes width-thickness ratio and slenderness ratio requirements for various structural elements from the AISC 341-05 and AISC 360-05 steel design codes. It provides the maximum allowed ratios for elements in beams, columns, braces, and links based on their loading condition and whether they are considered compact, noncompact, or seismically compact sections. Requirements are listed for structural shapes including I-shapes, channels, angles, round hollow structural sections, and pipes.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Limiting Width-Thickness Ratio

    Slenderness Ratio
    I-Shapes / Channel Angle Pipes
    Requirements of
    Flange Web Flange / Web Round HSS
    AISC 341-05 (Unstiffened Elements) (Stiffened Elements) (Unstiffened Elements) (Stiffened Elements)
    (9.SMF, 11.OMF, 13.SCBF,
    14.OCBF, 15.EBF)

    Beam members shall meet the Seismically Compact (AISC 341-05, Table I-8-1)
    Beam requirements of 8.2b,
    (Flexural Compression) 0.3 / 2.45 / 0.044 /
    Seismically Compact.
    Seismically Compact (AISC 341-05, Table I-8-1)
    *2 *5 *6
    SMF

    for 0.125
    Column Column members shall meet
    (Flexural Compression 3.14 / 1 1.54
    the requirements of 8.2b,
    or Combined Flexure and
    Seismically Compact. 0.3 / *5 0.044 /
    Axial Compression) for 0.125
    1.12 / 2.33 1.49 /

    Compact (AISC 360-05, Table B4.1)


    Beam No requirement beyond Section
    (Flexural Compression) 8.1. 0.38 / 3.76 / 0.07 /
    OMF

    Compact (AISC 360-05, Table B4.1)


    Column No requirement beyond Section
    (Flexural Compression) 8.1. 0.38 / 3.76 / 0.07 /

    Compact (AISC 360-05, Table B4.1)


    Beam No requirement beyond Section
    (Flexural Compression) 8.1. 0.38 / 3.76 / 0.07 /

    Seismically Compact (AISC 341-05, Table I-8-1) AISC 341-05, 13.2a


    *5 *9
    for 0.125
    Brace *1 Bracing members shall meet
    3.14 / 1 1.54
    (Combined Flexure the requirements of Section
    and Axial Compression) 8.2b, Seismically Compact. 0.3 / *5 0.3 / 0.044 / 4 /
    0.125
    SCBF

    for
    1.12 / 2.33 1.49 /

    Seismically Compact (AISC 341-05, Table I-8-1)


    *2 *5
    for 0.125
    Column Column members shall meet
    3.14 / 1 1.54
    (Combined Flexure the requirements of Section
    and Axial Compression) 8.2b, Seismically Compact. 0.3 / *5 0.044 /
    for 0.125
    1.12 / 2.33 1.49 /

    Compact (AISC 360-05, Table B4.1)


    Beam No requirement beyond Section
    (Flexural Compression) 8.1. 0.38 / 3.76 / 0.07 /

    Seismically Compact (AISC 341-05, Table I-8-1) AISC 341-05, 14.2


    *5 *10
    for 0.125
    *1 Bracing members shall meet
    OCBF

    Brace 3.14 / 1 1.54


    (Combined Flexure the requirements of Section
    and Axial Compression) 8.2b, Seismically Compact. 0.3 / *5 0.3 / 0.044 / 4 /
    for 0.125
    1.12 / 2.33 1.49 /

    Noncompact (AISC 360-05, Table B4.1) *7


    Column No requirement beyond Section
    (Uniform Compression) 8.1. 0.56 / 1.49 / 0.11 /

    Seismically Compact (AISC 341-05, Table I-8-1)


    *3 *5 *6
    for 0.125
    Links shall meet the
    Link 3.14 / 1 1.54
    requirements of Sction 8.2b,
    (Flexural Compression)
    Seismically Compact. 0.3 / *5 0.044 /
    for 0.125
    1.12 / 2.33 1.49 /

    Bracing members shall meet Compact (AISC 360-05, Table B4.1)


    Brace*1
    EBF

    the requirements of Section *8


    (Flexural Compression) 0.38 / 3.76 / 0.54 / 0.07 /
    8.2a, Compact.
    Seismically Compact (AISC 341-05, Table I-8-1)
    *4 *5 *6
    for 0.125
    Column members shall meet
    Column 3.14 / 1 1.54
    the requirements of 8.2b,
    (Uniform Compression)
    Seismically Compact. 0.38 / *5 0.044 /
    for 0.125
    1.12 / 2.33 1.49 /

    *1 Consider brace as flexural compression due to rigid connection required for SDC "D" of AISC 341-05.
    *2 If the ratios from equation below are greater than 2.0, it is permitted to use p in Table B4.1 of AISC 360-05.

    2.0
    (defined in clause 9.6. of AISC 341-05.)
    *3 It is permitted to use p in Table B4.1 of AISC 360-05 for flanges of links of length 1.6Mp /Vp or less, where Mp and Vp are defined in Section 15.
    *4 It is permitted to use p in Specification Table B4.1 for columns in STMF, Section 12 and columns in EBF, Section 15.
    *5 For LRFD,

    where
    , .
    , .
    0.90
    *6 For columns in SMF, if the ratios from equation *3 are greater than 2.0; columns in EBF; or EBF webs of links of length 1.6 Mp /Vp or less, it is permitted to use the
    following for p:
    for 0.125, 3.76 1 2.75

    for 0.125, 1.12 2.33 1.49

    *7 Adopted noncompact due to compact not avairable in Table B4.1 of AISC 360-05.
    *8 For uniform compression, noncompact shall be applied due to compact not avairable in Table B4.1 of AISC 360-05.
    *9 Braces with 4 / Kl/ r 200 are permitted in certain cases. (Refer to AISC 341-05, 13.2a)
    *10 This is applied for bracing members in K, V,or inverted-V configurations. ( Members that are designed as tension only are not required to satisfy this provision.)

    You might also like