0% found this document useful (0 votes)
62 views1 page

Data Sheet: Ölflex Heat 180 Sif

ÖLFLEX HEAT 180 SiF are silicone-insulated, single-core cables designed for use at high ambient temperatures under adequate ventilation and low mechanical stress. They are resistant to oil, alcohol, acids, caustic solutions, salt solutions, and salt water at room temperature. The cables feature fine strands of tinned copper conductors insulated with silicone and are flame retardant and halogen-free. They can operate at temperatures between -50°C and +180°C with adequate ventilation or up to +200°C temporarily.

Uploaded by

icaroheart
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
62 views1 page

Data Sheet: Ölflex Heat 180 Sif

ÖLFLEX HEAT 180 SiF are silicone-insulated, single-core cables designed for use at high ambient temperatures under adequate ventilation and low mechanical stress. They are resistant to oil, alcohol, acids, caustic solutions, salt solutions, and salt water at room temperature. The cables feature fine strands of tinned copper conductors insulated with silicone and are flame retardant and halogen-free. They can operate at temperatures between -50°C and +180°C with adequate ventilation or up to +200°C temporarily.

Uploaded by

icaroheart
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

U.I.

Lapp
GmbH DATA SHEET
LFLEX HEAT 180 SiF DB0047000
valid from: 23.03.2011

Application

LFLEX HEAT 180 SiF are silicone-single cores designed for use at high ambient temperatures under adequate ventilation
and low mechanical stress. They are resistant against oil, alcohol, acids, caustic solutions, salt solution and salt water at
room temperature. The combustion gases are halogen-free and non-corrosive.

Design

Conductor fine strands of tinned copper wires, acc. to EN 60228 or VDE 0295, class 5
Insualation silicone compound EI2 acc. to VDE 0207-363-1
Available core colours::
GN-YE / BK / BU / BN / BG / YE / GN / VT / PK / OG / RD / WH / GR

Electrical properties at 20

Insulation resistance > 200 G x cm


Rated voltage 300/500 V
Test voltage 2000 V

Mechanical and thermal properties

Bending radius fixed installation: 6 x core


One bend at end of core: 3 x core
Temperature range fixed installation: -50C bis +180C
(adequate ventilation provided)
temporary: +200C
Flammability flame retardant in acc. with IEC 60332-1-2
Halogen free in acc. with IEC 60754-1
Corrosivity of gases in acc. with IEC 60754-2
EC directive This cable is conform to the EC-Directives 2006/95/EC (Low Voltage Directive)
and 2002/95/EC (RoHS, Restriction of the use of certain hazardous substances).

Product Developement Cable Document: DB0047000DE page 1 of 1


All rights reserved acc. to DIN ISO 16016.
PD 0019/2.2_11.10EN

You might also like