Scribd
Upload
57 views4 pages

AEDG Factory Reset SOP

This document provides instructions for performing a factory reset on certain Advantech device servers, including EKI-152X, EKI-122X, EKI132X, EKI-135X, and EKI-136X models. It warns that a factory reset will restore all settings to defaults and recommends backing up the current configuration first. The process involves using the Advantech Serial Device Server Configuration Utility to select "Restore to Factory Default Settings," confirming the action, and then power cycling the device within 10 seconds to complete the reset.

Uploaded by

Rafael Flores
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
57 views4 pages

AEDG Factory Reset SOP

This document provides instructions for performing a factory reset on certain Advantech device servers, including EKI-152X, EKI-122X, EKI132X, EKI-135X, and EKI-136X models. It warns that a factory reset will restore all settings to defaults and recommends backing up the current configuration first. The process involves using the Advantech Serial Device Server Configuration Utility to select "Restore to Factory Default Settings," confirming the action, and then power cycling the device within 10 seconds to complete the reset.

Uploaded by

Rafael Flores
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Advantech

ICG Device Server Factory Reset Process

Applicable to the following device series:


EKI-152X, EKI-122X, EKI132X, EKI-135X, EKI-136X
ADAM-457x

Change log:
First Draft Chad Shih 09/01/2014
Objective:
This SOP server to provide step by step instruction to perform factory reset on
applicable devices.

Attention before Restore Factory Setting:


1. This process will restore all setting on device back to the factory setting. Please
back up the current configuration if needed.
Process:
1. Open Advantech Serial Device Server Configuration Utility, right click on device
and click on Restore to Factory Default Settings

2. Click Yes on the pop up confirmation window.


3. Follow instruction on the pop-up window. To finalize the factory reset process,
user requires to physically power-cycle the device within 10 second. Once
finished, click on Ok.

4. The device is now having the original factory settings.

You might also like