Scribd
Upload
2K views3 pages

Automatic Movable Railway Platform With Train Arrival Detection and Monitoring Over Internet of Things (IoT)

This project involves creating an automatic movable railway platform that detects incoming trains using IR sensors and monitors the system over IoT. A microcontroller receives sensor signals and controls an H-bridge circuit to move the platform via a motor. When a train is near, the platform does not connect, and when the train is far, the platform connects, allowing passengers to move between platforms without stairs. All information is available on a web interface using an IoT module connected to the microcontroller.

Uploaded by

Anonymous Ndsvh2so
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
2K views3 pages

Automatic Movable Railway Platform With Train Arrival Detection and Monitoring Over Internet of Things (IoT)

This project involves creating an automatic movable railway platform that detects incoming trains using IR sensors and monitors the system over IoT. A microcontroller receives sensor signals and controls an H-bridge circuit to move the platform via a motor. When a train is near, the platform does not connect, and when the train is far, the platform connects, allowing passengers to move between platforms without stairs. All information is available on a web interface using an IoT module connected to the microcontroller.

Uploaded by

Anonymous Ndsvh2so
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 3

Automatic movable railway platform with train arrival detection and

monitoring over internet of things (IoT)

Technical Specifications:

Title of the project : Automatic movable railway platform with train arrival

detection and monitoring over internet of things (IoT)

Domain : Embedded Systems Design

Power Supply : +9V, 500mA Regulated Power Supply

Microcontroller : LPC2148/AT89S52

Software : Embedded C, Keil, Proload

Display : 16x2 LCD Display

Communication device : 2 IR Module

Applications : Railways

Abstract:
The main aim of this project is to automate railway track pedestrian crossing without use
staircase & announce the status of the arrival for platform users. In this system is also used to
avoid accident problems. Because, now a days train accidents are occurring frequently in India.

This project identifies the status of each train using IR transceivers and informs it to
microcontroller. So this project is useful for railway departments. The recent survey from the
social analytics was said that the most disadvantages in Indian railway is climbing up the
overhead steps for the physically challenged people. Our proposed system mainly deals with the
rectification of this disadvantage. Here we introducing the new concept of artificial railway
platform. For the successful approach we are using two sensors and for the execution we are
using H-bridge and for the controlling operations we are using microcontroller.

When the train comes near the artificial platform, the proximity sensor senses the train
and gives informs to the microcontroller. So that the platform is not connected during the arrival
of the train.

When the train is far away from the artificial platform the signal is given to
Microcontroller, then the output signal from the controller is send to H -Bridge. Then platform is
connected to allow people to walk from one platform to another easily without any strain of
climbing stairs. All the information is available in web using IoT module interfaced to the
controller.

Block Diagram:
Contra
st

16x2 LCD

IR Section
1

AT89S52 Moving
Reset H- Platform
Bridge Motor

Crystal
oscillator

IOT
Module
IR Section
2

Power Supply:

You might also like