Specications

ENGINE SWING SYSTEM

Model .......................................................... Komatsu SAA4D95LE-6 Type ..............................................Axial piston motor driving through
Type ...............................Common rail direct injection, water-cooled, planetary double reduction gearbox
emissionised, turbocharged, after-cooled diesel Swing lock ..................................Electrically actuated wet multi-disc
Engine power brake integrated into swing motor
at rated engine speed .................................................... 2.050 rpm Swing speed ...................................................................... 0 - 11 rpm
ISO 14396 ..........................................................72,6 kW / 97,3 HP Swing torque ......................................................................... 33 kNm
ISO 9249 (net engine power) .............................69,7 kW / 93,5 HP
No. of cylinders ................................................................................4
Bore stroke .................................................................95 115 mm
Displacement...........................................................................3,26 ltr
UNDERCARRIAGE
Starter motor ...........................................................................4,5 kW
Alternator ............................................................................ 24 V/60 A Construction ...........................................X-frame centre section with
Battery ........................................................................ 2 12 V/72 Ah box section track frames
Air lter type .......................Double element type with monitor panel Track assembly
dust indicator and auto dust evacuator Type .............................................................................Fully sealed
Shoes (each side)........................................................................43
Tension ...................................Combined spring and hydraulic unit
Rollers
Track rollers (each side) ................................................................7
HYDRAULIC SYSTEM Carrier rollers (each side) ..............................................................1

Type ..............HydrauMind. Closed-centre system with load sensing

and pressure compensation valves
Main pump ........................................ Variable-capacity piston pump
Pumps for .................. Boom, arm, bucket, swing, and travel circuits SERVICE REFILL CAPACITIES
Maximum pump ow .........................................................242 ltr/min
Hydraulic motors: Fuel tank ...................................................................................200 ltr
Travel............................. 2 axial piston motor with parking brake Radiator ...................................................................................17,7 ltr
Swing .................. 1 axial piston motor with swing holding brake Engine......................................................................................11,5 ltr
Relief valve settings: Final drive (each side) ................................................................2,1 ltr
Implement ...........................................................................355 bar Swing drive ................................................................................2,5 ltr
Travel...................................................................................355 bar Hydraulic tank ...........................................................................69 ltr
Swing ..................................................................................276 bar
Pilot .......................................................................................33 bar

ENVIRONMENT

Engine emissions ..........................Fully complies with EU Stage IIIB

DRIVES AND BRAKES and EPA Tier 4 interim exhaust emission regulations
Noise levels
Steering control ..................................2 levers with pedals giving full LwA external ................................100 dB(A) (2000/14/EC Stage II)
independent control of each track LpA operator ear ........................72 dB(A) (ISO 6396 dynamic test)
Drive method ................................................................... Hydrostatic Vibration levels (EN 12096:1997)*
Max. drawbar pull..............................................................12.500 kgf Hand/arm ............................ 2,5 m/s (uncertainty K = 0,63 m/s)
Max. travel speeds Body ................................... 0,5 m/s (uncertainty K = 0,25 m/s)
Lo / Hi .......................................................................2,9 / 5,1 km/h * for the purpose of risk assessment under directive 2002/44/EC,
please refer to ISO/TR 25398:2006.

17
Specications
OPERATING WEIGHT (APPR.)
MONO BOOM WITH BLADE
Operating Ground Operating Ground
Triple grouser shoes
weight pressure weight pressure
500 mm 13.700 kg 0,43 kg/cm 14.550 kg 0,46 kg/cm
600 mm 13.870 kg 0,36 kg/cm 14.720 kg 0,38 kg/cm
700 mm 14.050 kg 0,32 kg/cm 14.900 kg 0,33 kg/cm
500 mm road liner 13.820 kg 0,43 kg/cm 14.670 kg 0,46 kg/cm

Operating weight, including 2,5 m arm, 470 kg bucket, operator, lubricant, coolant, full fuel tank
and the standard equipment.

MAX. BUCKET CAPACITY AND WEIGHT

MONO BOOM
Arm length 2,5 m 3,0 m
Material weight up to 1,2 t/m 0,72 m 539 kg 0,72 m 539 kg
Material weight up to 1,5 t/m 0,64 m 513 kg 0,64 m 513 kg
Material weight up to 1,8 t/m 0,56 m 475 kg 0,49 m 445 kg

Max. capacity and weight have been calculated according to ISO 10567:2007.
Please consult with your distributor for the correct selection of buckets and attachments to suit the application.

BUCKET AND ARM COMBINATION

Arm length
Capacity SAE No. of teeth Width Weight 2,5 m 3,0 m
0,26 m 3 500 mm 339 kg  

0,33 m 3 600 mm 366 kg  

0,41 m 4 700 mm 409 kg  

0,49 m 4 800 mm 445 kg  

0,64 m 5 1.000 mm 513 kg  

0,72 m 5 1.100 mm 539 kg  

0,79 m 5 1.200 mm 566 kg 
0,60 m Ditch cleaning bucket 2.000 mm 395 kg  

0,66 m Ditch cleaning bucket 2.200 mm 426 kg  

Material weight up to 1,8 t/m 

Material weight up to 1,5 t/m 
Material weight up to 1,2 t/m 
Not usable

18
 Dimensions
MACHINE DIMENSIONS MONO BOOM
E Overall height of cab 2.815 mm
F Clearance under counterweight 900 mm
G Ground clearance 395 mm
H Tail swing radius 1.480 mm
I Tumbler centre distance 2.880 mm
J Track length 3.610 mm
K Track gauge 1.990 mm
L Overall track width with 500 mm shoes 2.490 mm
Overall track width with 600 mm shoes 2.590 mm
Overall track width with 700 mm shoes 2.690 mm
M Shoe width 500, 600, 700 mm
N Grouser height 20 mm
O Machine tail height 2.140 mm
P Overall width of upper structure 2.490 mm
Q Distance, swing center to rear end 1.480 mm
R Distance, swing center to blade 2.500 mm
S Blade, max. lifting height 470 mm
T Height of blade 590 mm
U Blade, max. digging depth 525 mm
Blade width (with 500 mm shoes) 2.490 mm
Blade width (with 600 mm shoes) 2.590 mm

R
P A
Q

B E
O

F T
S
G U
M N
K I
L J
C

MONO BOOM
Arm length 2.500 mm 3.000 mm
A Transport length 7.275 mm 7.160 mm
B Overall height (to top of boom) 2.950 mm 3.210 mm
C Length on ground (transport) 4.400 mm 4.290 mm

19
Working Range
MONO BOOM
10

7
F
6
G
5
A H
4
B
3

1
G.L.
0
1

2
C E D
3

5
6
(m) 8 7 6 5 4 3 2 1 0
2.440

ARM LENGTH 2.500 mm 3.000 mm

A Max. digging height 9.340 mm 9.700 mm
B Max. dumping height 6.840 mm 7.350 mm
C Max. digging depth 5.480 mm 5.900 mm
D Max. vertical wall digging depth 4.900 mm 5.340 mm
E Max. digging depth of cut for 2,44 m level 5.265 mm 5.715 mm
F Max. digging reach 8.300 mm 8.720 mm
G Max. digging reach at ground level 8.180 mm 8.600 mm
H Min. swing radius 1.980 mm 2.265 mm
Bucket digging force (ISO) 9.500 kgf 9.000 kgf
Arm crowd force (ISO) 6.300 kgf 5.700 kgf

20
 Lifting Capacity
MONO BOOM

A Reach from swing center When removing bucket, linkage

or cylinder, lifting capacities can
B Bucket hook height be increased by their respective
weights
C Lifting capacities, including With 500 mm shoes
bucket (450 kg), bucket
linkage and bucket cylinder

Rating over front

Rating over side

Rating at maximum reach

7,0 m 6,0 m 4,5 m 3,0 m 1,5 m

Arm length

6,0 m kg *1.340 *1.340 *1.870 *1.870 *2.670 *2.670

4,5 m kg *1.250 *1.250 *1.600 1.430 *2.680 1.950 *2.840 *2.840
3,0 m kg *1.250 1.170 2.250 1.400 2.950 1.870 *3.760 3.090 *3.740 *3.740
1,5 m kg *1.330 1.090 2.180 1.340 2.830 1.760 4.580 2.840 *7.560 5.440
3.000 mm
0,0 m kg *1.500 1.100 2.120 1.280 2.720 1.660 4.330 2.620 *6.480 4.930
450 kg -1,5 m kg *1.810 1.200 2.080 1.250 2.650 1.600 4.200 2.500 *6.220 4.760 *3.840 *3.840
0,5 m -3,0 m kg 2.460 1.490 2.660 1.600 4.180 2.490 *6.480 4.780 *5.760 *5.760
-4,5 m kg *2.920 2.290 *3.500 2.590 *5.500 4.950

6,0 m kg *1.650 *1.650 *3.100 *3.100

4,5 m kg *1.540 *1.540 *2.850 1.920 *3.570 3.210
3,0 m kg *1.550 1.340 *1.970 1.390 2.930 1.860 *4.360 3.040 *5.880 *5.880
2.500 mm
1,5 m kg *1.660 1.250 2.180 1.340 2.830 1.770 4.540 2.820 *7.430 5.310
0,0 m kg *1.910 1.260 2.140 1.300 2.740 1.680 4.340 2.640 *6.090 4.940
450 kg -1,5 m kg 2.310 1.410 2.700 1.640 4.250 2.560 *6.070 4.860 *4.370 *4.370
0,5 m
-3,0 m kg 2.940 1.800 4.270 2.570 *6.540 4.920 *5.750 *5.750
-4,5 m kg

* Load is limited by hydraulic capacity rather than tipping.

Ratings are based on SAE Standard No. J1097.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.

21