LSA Pump Series - Low maintenance,

abrasion resistant for heavy duty service

02 LSA Pump Series

Solutions for Severe Ore and Tailings

Slurry Transport

GIW Minerals LSA pumps are widely used in ore transport, mill discharge,
cyclone feed, tailings and plant process. The LSA can also be used for
environmental cleanup, dewatering, pulp and paper, food process, coke
& resin pumping and ash handling.

LSAs rugged design features, combined with For maximum high power capability, each
shell, impeller and liner in proprietary GIW LSA pump is equipped with a heavy duty
Gasite material, are recognized worldwide

split cartridge bearing assembly with spherical
for superior abrasion resistance. In addition, roller radial bearings and a separate steep
several impeller options to fine tune pump angle, self-aligning thrust bearing. The fused
performance, and customized pumping needs carbide coated shaft sleeve provides a smooth
are available. These options allow optimum and extremely hard surface for long shaft
wear life and sustained efficiency. seal life.

Actual Photo: LSA pumps in service at Minera El Roble Plant in Durango, Mexico
 Design Features 03

Choose the GIW Minerals LSA Pump for Severe Slurries

Design
Horizontal end suction construction. Single wall pump
shell with replaceable suction side liner; four vane impeller
or three vane option for larger size solids.

Wear Parts
Impeller designed for wear-resistant operation in highly abrasive
slurries using our flow simulation computer program.
Two aramid gaskets aid in the removal of the impeller.
Replaceable suction liner facilitates pump internal inspection
and minimizes wear part usage and cost. Liner can be
rotated at intervals to increase wear life.
Pump shell is computer designed to optimize wear and efficiency.

Shaft Seal
Replaceable wear plate maximizes stuffing box life. Technical Data
Reduced water consumption options available. Discharge 18 to 26 in (457 to 660 mm)
Shaft sleeve with fused carbide wear resistant coating to Flow rates 100-60,000 gpm (20-13,600 m3/h)
maximize packing life. Total head up to 300 ft (90 m)
Pressure rating up to 235 psi (up to 16 bar)
Mechanical End Temperature limit 150F (65C)
Robust stiffened shaft to improve the wear life of the
Applications
mechanical end and stuffing box.
Mineral Processing Ash Handling Mine Dewatering
Impeller release ring for safe and easy impeller removal. Power Generation Flue Gas Desulfurization Industrial Slurries
Feature is standard on larger pump sizes. Aggregate Thickener & Tailings Dredge

Spring retainer ring locates the thrust bearing preload

springs for correct axial thrust load.
Radial bearings are a heavy duty, self-aligning, double-
row, spherical roller-type design.
Split-cartridge bearing assembly offers ease of inspection
and maintenance.
Accurate impeller clearance adjustments are easily made
with the adjusting screw.
Labyrinth seals protect bearings.

Quick Alignment & Interchangeability

Rabbet fits machined in the pedestal support the shell
and provide component alignment. For ease of maintenance
and maximum reliability,
To optimize wear life and efficiency, various hydraulic select the LSA Pump.
design and material options can be used on the same
mechanical end.
04 LSA Pump Options

The LSA Pump Series offers a wide selection range

LSA Pump Options Low Flow Stuffing Box

The LSA pump series is divided into four pump groups. Pumps can Reduce sealing water flows Restrict seal water flow
be custom tailored to meet a wide range of applications requirements. up to 95% into pump
This allows customers to select the type, size and operation speed that Maximize water control Minimize flush water spray
will perform the best. Pumps included in the LSA series are: Pressure or flow controlled Improve reliability

LSA S - normal severe duty requirements Shaft Seal

LSA Expanded - duty-specific applications such

as high pressure, coarse and fine slurry

LHD - low head, high flow applications

Throat Bushing Minimum Dilution SpiralTrac

MHD - medium head, high flow applications

LSA S Pump Range

Standard Pressure and Optimized Hydraulics
2000 to 7500 SFPM, 10 to 38 SMPS, 40% (or min. flow) to 120% BEPQ

Flowrate (m3/hr)
100 1,000 10,000
400

80

300 22
X2
4L
SA
54
60
32

3x4
36

44

LSA
5

21
2 LSA

Head (m)
Head (ft)

39
4 LSA
SA 2

8 LSA
5

25
21
SA 2

A 48
6 LSA

8
LSA
6x8 L

10x1
LSA

200
12x1

SA 5
18x1
4x6 L

4 LS
16x1
8x10

40
4x6

28 L
20x2
21

26x
LSA
2x3

100
20

0 0
100 1,000 10,000 100,000
Flowrate (gpm)
 05

LSA S Pump Range Information Table

Assembly Maximum Discharge Vane Number

Nominal Size Free Passage
Number Operating Pressure Position Intervals & Type
in mm psi bar in mm degrees

0572X 2x3-21 50x75-530 245 16.9 1.0x1.0 25x25 45 4ME

0537X 3x4-21 75x100-530 153 10.6 1.0x1.0 25x25 45 3ME
0574X 4x6-21 100x150-530 245 16.9 2.5x2.8 63x71 45 4ME
0516X 4x6-25 100x150-635 180 12.4 1.5x1.5 39x39 22.5 4ME
0501X 6x8-25 150x200-635 180 12.4 3.2x3.6 81x92 22.5 4ME
0575X 8x10-25 200x250-635 180 12.4 2.4x4.9 63x125 22.5 4ME
0562X 8x10-32 200x250-810 172 11.8 3.9x4.6 99x117 22.5 4ME
0563X 8x10-32 200x250-810 172 11.8 4.6x4.6 117x115 22.5 3ME
0564X, 0566X 8x10-32 200x250-810 187 12.9 3.9x4.6 99x117 15 4ME
0565X, 0567X 8x10-32 200x250-810 187 12.9 4.6x4.6 117x117 15 3ME
0576X,0577X 10x12-32 250x300-810 157 10.8 3.7x6.7 95x171 15 4ME
0508X, 0510X 10x12-36 250x300-910 160 11.0 4.0x6.7 102x171 15 4ME
0509X, 0511X 10x12-36 250x300-910 156 10.8 6.3x6.7 160.x171 15 3ME
0568X, 0570X 12x14-36 300x350-910 172 11.9 5.1x8.3 129x210 15 4ME
0569X, 0571X 12x14-36 300x350-910 172 11.9 6.4x8.3 162x210 15 3ME
0578X 16x16-39 400x400-990 119 8.2 5.8x8.2 148x209 15 4ME
0579X, 0580X 16x16-39 400x400-990 122 8.4 4.4x8.7 112x222 30 4ME
0581X,0583X 16x18-44 400x450-1115 142 9.8 5.5x7.6 141x193 18 4ME
0582X, 0584X 16x18-44 400x450-1115 142 9.8 7.6x7.6 193x193 18 3ME
0538X, 0540X 18x18-44 450x450-1115 160 11.0 6.3x11.6 161x295 18 4ME
0539X, 0541X 18x18-44 450x450-1115 160 11.0 8.9x11.6 226x295 18 3ME
0589X, 0590X 20x20-48 500x600-1220 142 9.8 9.7x13.0 247x330 9 4ME
0548X 20x20-48 500x600-1220 130 9.8 9.7x13.0 247x330 15 4RV
0549X 20x24-48 500x600-1220 113 7.8 6.1x13.0 155x330 15 4ME
0550X 22x24-54 550x600-1370 186 12.9 8.1x13.5 208x343 18 4ME
0551X 26x28-58 650x700-1470 100 6.9 8.6x11.7 218x298 15 4ME

Discharge Positions Materials

Rotation direction is clockwise from the drive end.
A vertical discharge is standard. Part Number Item Standard

101 Shell Gasite WD28G

230 Impeller Gasite WD28G
16-1 Suction Plate Ductile Iron
13-19 Suction Liner Gasite 18G
332 Pedestal Fab Steel
210 Shaft 4150 Steel
451 Stuffing Box Grey Iron
524 Shaft Sleeve Carbide Coated Steel
350 Bearing Housing Grey Iron

Consult the factory for materials and configurations for temperatures above
150 F. Alternate material options are available.
06 LSA Expanded Range

LSA Expanded Pump Range

High Pressure and Other Available Hydraulics
2000 to 7500 SFPM, 10 to 38 SMPS, 40% (or min. flow) to 120% BEPQ

Flowrate (m3/hr)
100 1,000 10,000
400 90

44

SA 62
48
SA
350

x2 LSA
8L

4L
x1

4
x2
18

20
20
300 68

40
8 LSA
A 36
32
A 32
A 36
21

250

A 54
A 39
25
25

LSA

A 44

4
4 LS
LSA

SA 8
2 LS

16x1
2 LS
LSA
LSA

S
6 LS

22 L
8x10

0 LS
12x1

Head (m)
3x4

200
300
Head (ft)

10x1

34 L
45

10x1
6x8
4x6

16x1

20x
18x2

30x
150

100 23

50

0 0
100 1,000 10,000 100,000
Flowrate (gpm)

LSA Expanded Pump Range Information Table

Assembly Maximum Discharge Vane Number

Nominal Size Free Passage
Number Operating Pressure Position Intervals & Type

Pump Range Information

in
Table
mm psi bar in mm degrees

9603D 3x4-21 75x100-530 333 23.0 1x2.3 25x58 45 4ME

9606D 4x6-25 100x150-635 667 46.0 1.56x3.3 40x84 22.5 4ME
9602D 6x8-25 150x200-635 717 49.4 3.2x3.6 81x91 22.5 4ME
9594D 8x10-32 200x250-810 485 33.5 3.9x4.6 99x117 15 4ME
9575D 10x12-32 250x300-810 400 27.6 4.2x6.5 107x165 15 4ME
9555D 10x12-36 250x300-910 600 27.6 4x6.75 102x171 15 4ME
9818D 12x14-36 300x350-910 383 26.4 5.1x8.3 130x211 15 4ME
9514D 14x16-40 350x400-1015 420 29.0 6x6.2 152x157 9 4ME
9572D 16x16-39 400x400-990 333 23.0 5.7x8 145x203 15 4ME
9635D 16x18-40 400x450-1015 230 15.9 4.9x7.9 124x201 18 5ME
9554D 18x18-44 450x450-1115 202 13.9 6.3x10 160x254 9 4ME
9579D 19x18-50 450x450-1270 190 13.1 5.5x8.1 140x206 9 5ME
9544D 18x20-44 450x500-1115 500 34.5 6.3x10 160x254 9 5HE
9573D 20x22-54 500x550-1370 123 8.5 8x10.25 203x260 15 4ME
9827D 20x24-48 500x600-1220 117 8.0 5x12 127x305 15 5ME
9834D 20x24-62 500x600-1575 213 14.7 11.5x11.7 292x297 12.86 3ME
9835D 20x25-62 500x635-1575 200 13.8 10.2x10.4 259x264 15 3ME
9837D 24x24-62 600x600-1575 283 19.5 11.5x11.7 292x297 12.86 3ME
9527D 30x34-84 760x860-2130 200 13.8 13.5x14.7 343x373 11.25 3ME
 LHD & MHD Range 07

LHD Pump Range MHD Pump Range

High Specific Speed Pumps - 6500 SFPM, Low and Medium Speed Pumps - 6800 SFPM,
33.0 SMPS, Approx. 50% to 110% BEPQ 34.5 SMPS, Approx. 50% to 110% BEPQ

Flowrate (m3/hr) Flowrate (m3/hr)

1,000 10,000 1,000 10,000
60

180

225 68

105
40

72

83
HD 42

HD
HD

HD
49

HD 42

120
44

D5
33

42

150 45
24x 4 LHD

53 M
24x 6 LHD

33 M

44 M
Head (m)

Head (m)
Head (ft)

Head (ft)
LHD

LHD

H
26 L

38 L
24 L

44x
2

30x

42x
2
18

20

22x

38x
26x
18x

20x

75 23
20
60

0 0 0 0
100 10,000 100,000 10,000 100,000
Flowrate (gpm) Flowrate (gpm)

LHD Pump Range Information Table

Assembly Maximum Discharge Vane Number

Nominal Size Free Passage
Number Operating Pressure Position Intervals & Type
in mm psi bar in mm degrees

9601D 18x18-33 450x450-830 117 8 6.6x8.0 168x203 15 3ME

9518D 20x20-42 500x500-1065 133 9.2 9.6x10.6 245x269 9 3ME
9819D 22x24-42 550x600-1065 160 11 11.5x12.0 292x305 9 3ME
9607D 24x24-44 600x600-1115 97 6.7 11.0x16.0 279x406 9 3ME
9814D 24x26-49 600x650-1245 220 15.2 7.7x14.1 196x358 15 4ME
9455D 26x26-50 650x650-1270 147 10.1 15.0x15.3 381x387 22.5 3ME
9300D 38x38-58 950x950-1473 87 6 12.4x13.7 315x348 N/A 4HE

MHD Pump Range Information Table

Assembly Maximum Discharge Vane Number

Nominal Size Free Passage
Number Operating Pressure Position Intervals & Type
in mm psi bar in mm degrees

9689D 24x28-58 600x700-1473 137 9.4 9.3x13.8 236x349 15 4ME

9526D 30x33-72 750x825-1825 191 13.2 15.5x15.8 394x401 11.25 3ME
5417D 42x44-83 1050x1100-2108 70 4.8 16.2x19.2 412x488 N/A 3ME
9068D 44x53-105 1100x1325-2667 N/A N/A 21.3x23.0 541x584 N/A 4ME
 2369.024-US / 02.15 / GIW Industries, Inc. 2015 Subject to technical modifications.

GIW Industries, Inc. (A KSB Company)

5000 Wrightsboro Road, Grovetown
Georgia 30813-2842, USA
www.giwindustries.com