Cable Spec
Cable Spec
Cable Spec
For
Electric Wires
and Cables
Copper Conductor Cables
B
Publication : 2006 (Revised)
CONTINUOUS CURRENT RATING FOR EACH CONDITION OF WIRES AND CABLES
TEMPERATURE CORRECTION FACTORS FOR CONDUCTOR RESISTANCE
A7
A8
: 0-2369-1818
CONDITION OF INSTALLATION A9
AC/AD RESISTANCE RATIOS A 10
PROPERTIES OF INSULATION AND JACKET MATERIALS
- Resistance to industrial chemical A 11
- General comparision data A 12
- Thermal properties A 14
- Electrical properties A 15
- Long-time Heat Aging curves A 16
SYMBOLS OF ELECTRICAL UNITS A 17
ELECTRICAL FORMULARS A 17
STANDARD COEFFICIENT OF CONVERSION A 18
CONDUCTIVITY AND DENSITY OF METALS A 19
THE COPPER CONDUCTOR RESISTANCE AT 20 oC FOR TIS 11-2531
- The number of wires in the conductprs of the cable for fixed wiring A 20
- The diameter of wires in the conductors of the flexible cables and cords A 21
TABLE OF THE DIMENSIONS FOR THE MOTOR STARTES A 22
TECHNICAL DATA OF CABLE
- THW A 23
- VCT ( 1 Core, 2 Core ) A 24
- VCT ( 3 Core, 4 Core ) A 25
- NYY ( 1 Core, 2 Core ) A 26
- NYY ( 3 Core, 4 Core ) A 27
- 0.6/1KV-CV ( Laying Type : Touching ) , ( Laying Type : Spacing ) A 28
- 0.6/1KV-CV ( Laying Type : Trefoil ), ( 2 Core ) A 29
- 0.6/1KV-CV ( 3 Core, 4 Core ) A 30
- 0.6/1KV-CV-AWA ( Laying Type : Touching ) , ( Laying Type : Spacing ) A 31
- 0.6/1KV-CV-AWA ( Laying Type : Trefoil ) A 32
- 0.6/1KV-CV-SWA ( 2 Core ) A 32
- 0.6/1KV-CV-SWA ( 3 Core, 4 Core ) A 33
- 1.8/3 ( 3.6 ) KV-CV ( 1 Core, 3 Core ) A 34
- 3.6/6KV-CV ( Laying Type : Touching ) , ( Laying Type : Spacing ) A 35
- 6/10KV-CVT
- 6/10KV-CVQ
- 12/20KV-CV (Laying Type : Touching) , ( Laying Type : Spacing )
A 39
A 39
: 0-2369-1818
A 40
- 12/20KV-CV (Laying Type : Trefoil) , ( 3Core ) A 41
- 12/20KV-CV - SWA( 3Core ) A 41
- 18/30KV-CV( 1Core , 3Core) A 42
- 18/30KV-CV-SWA ( 3Core ) A 42
- 69KV-CE (CU.WIRE SCREEN) A 43
- 115KV-CE (CU. WIRE SCREEN ) A 43
B Copper Conductor Cables
B1 Building Wires and Cables
IV B2
THW And MEA TYPE A B4
VAF B6
VAF-GRD B8
B2 Low Voltage Power Cables
VVR B 11
VVR-GRD B 14
VV,MEA TYPE B B 16
VVF, MEA TYPE B B 18
VVF-GRD , MEA TYPE B-GRD B 20
NYY, MEA TYPE C B 22
NYY, MEA TYPE C-N B 26
NYY-GRD , MEA TYPE C-GRD B 28
NYY-SWA B 31
NYCY B 35
0.6/1KV-CV B 37
0.6/1KV-CV-SWA B 40
B3 Medium Voltage Power Cables
1.8/3(3.6)KV-CV B 44
3.6/6(7.2)KV-CV B 46
6/10(12)KV-CV B 48
THAI-YAZAKI TECHNICAL DATA
8.7/15(17.5)KV-CV B 50
12/20(24)KV-CV B 52
18/30(36)KV-CV B 54
B4 High Voltage Power Cables
69KV-CE (CU. WIER SCREEN) B 57
115KV-CE (CU. WIER SCREEN)
B5 Control Cable
B 59
CVV
CVV-S : 0-2369-1818
B6 Flexible Wire and Cables
B 62
B 62
VSF B 71
VTF B 73
VFF B 75
VFF-GRD B 77
VKF B 79
VCT B 81
VCT-GRD B 83
B7 Automobile Wire and Cables
AV B 86
B8 Bare Conductor
FHC B 90
CONTINUOUS CURRENT RATING FOR EACH CONDITION OF WIRES AND CABLES
TEMPERATURE CORRECTION FACTORS FOR CONDUCTOR RESISTANCE
A7
A8
: 0-2369-1818
CONDITION OF INSTALLATION
AC/AD RESISTANCE RATIOS
A
PROPERTIES OF INSULATION AND JACKET MATERIALS
A9
A 10
- 6/10KV-CV-SWA A 39
- 6/10KV-CVT A 39
- 6/10KV-CVQ A 39
A : 0-2369-1818
- 12/20KV-CV (Laying Type : Touching) , ( Laying Type : Spacing )
- 12/20KV-CV (Laying Type : Trefoil) , ( 3Core )
A 40
A 41
- 12/20KV-CV - SWA( 3Core ) A 41
- 18/30KV-CV( 1Core , 3Core) A 42
- 18/30KV-CV-SWA ( 3Core ) A 42
- 69KV-CE (CU.WIRE SCREEN) A 43
- 115KV-CV (CU. WIRE SCREEN ) A 43
B.W.G. A.W.G. S.W.G. mm.G Mil mm. Cir.Mil in2 mm2 lb/1,000 ft kg/km
: 0-2369-1818
- - 6/0 - 464 11.786 215,296 0.1691 109.1 651.7 969.9
- 4/0 - - 460 11.684 211,600 0.1662 107.2 640.5 953.0
4/0 - - - 454 11.532 206,100 0.1619 104.4 624.0 928.1
- - 5/0 - 432 A 10.973 186,624 0.1466 94.56 565.0 840.6
3/0 - - - 425 10.795 180,600 0.1419 91.52 546.9 813.6
- 3/0 - - 409.6 10.404 167,772 0.1318 85.03 508.0 755.9
- - 4/0 - 400 10.160 160,000 0.1257 81.07 484.5 720.7
- - - 10 393.7 10.000 155,000 0.1217 78.54 468.0 698.2
2/0 - - - 380 9.652 144,400 0.1134 73.17 437.1 650.5
- - 3/0 - 372 9.440 138,384 0.1087 70.12 418.9 623.4
- 2/0 - - 364.8 9.266 133,079 0.1045 67.42 402.7 599.4
- - - 9 354.3 9.000 125,528 0.09859 63.62 380.0 565.6
- - 2/0 - 348 8.839 121,104 0.09512 61.36 366.6 545.5
0 - - - 340 8.636 115,600 0.09079 58.58 349.9 520.8
- 0 - - 324.9 8.250 105,560 0.08291 53.49 319.5 475.5
- - 0 - 324 8.230 104,976 0.08245 53.19 317.8 472.8
- - - 8 315 8.000 99,225 0.07793 50.27 300.3 446.9
1 - 1 - 300 7.629 90,000 0.07069 45.60 272.4 405.4
- 1 - - 289.3 7.348 83,694 0.06573 42.41 253.3 377.0
2 - - - 284 7.214 80,660 0.06335 40.87 244.2 363.3
- - 2 - 276 7.010 76,176 0.05983 39.60 230.6 343.2
- - - 7 275.6 7.000 75,955 0.05966 38.48 229.9 342.1
3 - - - 259 6.579 67,080 0.05269 33.99 203.1 302.2
- 2 - - 257.6 6.544 66,358 0.05212 33.63 200.9 299.0
- - - 6.5 255.9 6.500 65,485 0.05143 22.18 189.2 295.0
- - 3 - 252 6.401 63,504 0.04988 32.18 192.2 286.1
4 - - - 238 6.045 56,640 0.04449 28.70 171.5 255.1
- - - 6.0 236.2 6.000 55,790 0.04382 28.27 168.9 251.1
- - 4 - 232 5.893 53,824 0.04227 27.27 162.9 242.4
- 3 - - 229.4 5.827 52,624 0.04133 26.66 159.3 237.0
5 - - - 220 5.588 48,400 0.03801 24.52 146.5 218.0
- - - 5.5 216.5 5.500 46,872 0.03681 23.72 141.9 210.9
- - 5 - 212 5.385 44,944 0.03530 22.77 136.0 202.4
- 4 - - 204.3 5.189 41,738 0.03278 21.15 126.3 188.0
6 - - - 203 5.156 41,210 0.03237 20.88 124.8 185.6
- - - 5.0 196.9 5.000 38,770 0.03045 19.63 117.4 174.5
- - 6 - 192 4.877 36,864 0.02895 18.68 111.6 166.3
- 5 - - 181.9 4.621 33,088 0.02599 16.77 100.2 149.1
7 - - - 180 4.572 32,400 0.02545 16.42 98.08 146.0
- - - 4.5 177.2 4.500 31,400 0.02466 15.90 95.04 141.4
- - 7 - 176 4.470 30,976 0.02433 15.70 93.77 139.6
8 - - - 165 4.191 27,220 0.02138 13.80 82.40 122.7
- 6 - - 162 4.115 26,244 0.02061 13.30 79.43 118.2
B.W.G. A.W.G. S.W.G. mm.G
-
-
-
-
8
-
-
4.0
Mil
160
157.5
mm.
4.064
4.000
Cir.Mil
25,600
24,806
in2
0.02011
0.01948
mm2
12.97
12.57
lb/1,000 ft
77.50
75.08
kg/km
115.30
111.80
: 0-2369-1818
9 - - - 148 3.759 21,900 0.01720 11.10 66.29 98.68
- 7 - - 144.3 3.665 20,822 0.01635 10.55 63.01 93.79
A -
-
-
-
9
-
-
3.5
144
137.8
3.658
3.500
20,736
18,989
0.01629
0.01491
10.52
9.621
62.78
57.46
93.52
85.53
10 - - - 134 3.404 17,960 0.01410 9.098 54.34 80.88
- 8 - - 128.5 3.264 16,512 0.01297 8.368 49.99 74.39
- - 10 - 128 3.251 16,384 0.01287 8.302 49.60 73.81
- - - 3.2 126 3.200 15,876 0.01247 8.042 48.06 71.49
11 - - - 120 3.048 14,400 0.01131 7.297 43.59 64.87
- - 11 - 116 2.946 13,456 0.01057 6.818 40.74 60.61
- 9 - - 114.4 2.906 13,087 0.01028 6.632 39.62 58.96
- - - 2.9 114.2 2.900 13,042 0.01024 6.605 39.47 58.72
12 - - - 109 2.769 11,880 0.009331 6.020 35.96 53.52
- - 12 - 104 2.642 10,816 0.008495 5.481 32.74 48.73
- - - 2.6 102.4 2.600 10,486 0.008246 5.309 31.78 47.29
- 10 - - 101.9 2.588 10,384 0.008156 5.262 31.43 46.78
13 - - - 95 2.413 9,025 0.007088 4.573 27.32 40.65
- - 13 - 92 2.337 8,464 0.006648 4.289 25.62 38.13
- 11 - - 90.74 2.305 8,234 0.006467 4.172 24.92 37.09
- - - 2.3 90.55 2.300 8,199 0.006439 4.155 24.82 36.94
14 - - - 83 2.108 6,889 0.005411 3.491 20.85 31.04
- 12 - - 80.81 2.053 6,530 0.005129 3.309 19.77 29.42
- - 14 - 80 2.032 6,400 0.005027 3.243 19.37 28.83
- - - 2.0 78.74 2.000 6,200 0.004869 3.142 18.77 27.93
15 - 15 - 72 1.829 5,184 0.004072 2.627 18.46 27.36
- 13 - - 71.96 1.828 5,178 0.004067 2.624 15.67 23.33
- - - 1.8 70.87 1.800 5,023 0.003945 2.545 15.20 22.63
16 - - - 65 1.651 4,225 0.003318 2.141 12.79 19.03
- 14 - - 64.08 1.628 4,106 0.003225 2.081 12.43 18.50
- - 16 - 64 1.626 4,096 0.003217 2.075 12.40 18.45
- - - 1.6 62.99 1.600 3,968 0.003116 2.011 12.01 17.88
17 - - - 58 1.473 3,364 0.002642 1.705 10.18 15.16
- 15 - - 57.07 1.450 3,257 0.002558 1.650 9.859 14.67
- - 17 - 56 1.422 3,136 0.002463 1.589 9.493 14.13
- - - 1.4 55.12 1.400 3,038 0.002386 1.539 9.196 13.68
- 16 - - 50.82 1.291 2,583 0.002029 1.309 7.820 11.64
18 - - - 49 1.245 2,401 0.001886 1.217 7.269 10.82
- - 18 - 48 1.219 2,304 0.001810 1.167 6.976 10.38
- - - 1.2 47.24 1.200 2,232 0.001753 1.131 6.756 10.06
- 17 - - 45.26 1.150 2,048 0.001608 1.037 6.197 9.219
19 - - - 42 1.067 1,764 0.001385 0.8938 5.388 7.946
- 18 - - 40.30 1.024 1,624 0.001275 0.8226 4.914 7.313
- - 19 - 40 1.016 1,600 0.001257 0.8107 4.845 7.207
B.W.G. A.W.G. S.W.G. mm.G
-
-
-
-
-
20
1.0
-
Mil
39.37
36
mm.
1.000
0.9144
Cir.Mil
1,550
1,296
in2
0.001217
0.001018
mm2
0.7854
0.6576
lb/1,000 ft
4.690
3.923
kg/km
6.982
5.838
-
-
20
21
: 0-2369-1818
19
-
-
-
-
-
-
21
-
0.90
-
-
35.89
35.43
35
32 A
0.9116
0.9000
0.8890
0.8128
1,288
1,255
1,225
1,024
0.001012
0.0009857
0.0009621
0.0008042
0.6529
0.6362
0.6207
0.5189
3.900
3.799
3.708
3.099
5.804
5.656
5.518
4.613
- 20 - - 31.96 0.8118 1,021 0.0008019 0.5174 3.091 4.600
- - - 0.80 31.50 0.8000 992.3 0.0007794 0.5027 3.004 4.469
- 21 - - 28.46 0.7229 810 0.0006362 0.4105 2.452 3.649
22 - 22 - 28 0.7112 784 0.0006158 0.3973 2.373 3.532
- - - 0.70 27.56 0.7000 759.6 0.0005966 0.3848 2.299 3.421
- - - 0.65 25.59 0.6500 654.8 0.0005143 0.3318 1.982 2.950
- 22 - - 25.35 0.6438 642.6 0.0005047 0.3256 1.945 2.895
23 - - - 25 0.6350 625 0.0004909 0.3167 1.892 2.816
- - 23 - 24 0.6096 576 0.0004524 0.2919 1.744 2.595
- - - 0.60 23.62 0.6000 557.9 0.0004382 0.2827 1.689 2.513
- 23 - - 22.57 0.5733 509.4 0.0004001 0.2581 1.542 2.295
24 - 24 - 22 0.5583 484 0.0003801 0.2452 1.465 2.180
- - - 0.55 21.65 0.5500 468.7 0.0003681 0.2376 1.419 2.112
- 24 - - 20.10 0.5106 404 0.0003173 0.2047 1.223 1.820
25 - 25 - 20 0.5080 400 0.0003142 0.2027 1.211 1.802
- - - 0.50 19.69 0.5000 387.7 0.0003045 0.1963 1.174 1.745
26 - 26 - 18 0.4572 324 0.0002545 0.1642 0.9809 1.460
- 25 - - 17.90 0.4547 320.4 0.0002516 0.1623 0.9697 1.443
- - - 0.45 17.72 0.4500 314 0.0002466 0.1590 0.9504 1.414
- - 27 - 16.4 0.4166 269 0.0002113 0.1363 0.7844 1.212
27 - - - 16 0.4064 256 0.0002011 0.1297 0.7750 1.153
- 26 - - 15.94 0.4049 254.1 0.0001996 0.1288 0.7693 1.145
- - - 0.40 15.75 0.4000 248.1 0.0001949 0.1257 0.7512 1.118
- - 28 - 14.8 0.3759 219 0.0001720 0.1110 0.6629 0.9868
- 27 - - 14.20 0.3606 201.6 0.0001583 0.1021 0.6101 0.9077
28 - - - 14 0.3556 196 0.0001539 0.09932 0.5931 0.8330
- - - 0.35 13.78 0.3500 189.9 0.0001491 0.09621 0.5746 0.8553
- - 29 - 13.6 0.3454 185 0.0001453 0.09372 0.5600 0.8332
29 - - - 13 0.3302 169 0.0001327 0.08563 0.5114 0.7613
- 28 - - 12.64 0.3211 159.8 0.0001255 0.08097 0.4837 0.7198
- - - 0.30 12.60 0.3200 158.8 0.0001246 0.08042 0.7806 0.7149
- - 30 - 12.4 0.3150 153.8 0.0001208 0.07791 0.4656 0.6926
30 - - - 12 0.3048 144 0.0001131 0.07297 0.4359 0.6487
- - 31 - 11.6 0.2946 134.6 0.0001057 0.06818 0.4074 0.6061
- - - 0.29 11.42 0.2900 130.4 0.0001024 0.06605 0.3947 0.5872
- 29 - - 11.26 0.2859 126.8 0.00009959 0.06425 0.3838 0.5712
- - 32 - 10.8 0.2743 116.6 0.00009158 0.05913 0.3530 0.5257
- - - 0.26 10.24 0.2600 104.9 0.00008239 0.05309 0.3175 0.4720
- 30 - - 10.03 0.2546 100.6 0.00007901 0.05097 0.3045 0.4531
-
32
-
-
-
31
-
-
-
0.23
-
-
9.055
9
8.928
0.2300
0.2286
0.2238
81.99
81.102
79.71
0.00006440
0.00006362
0.00006260
0.04155
0.04104
0.04039
0.2482
0.2452
0.2413
0.3694
0.3649
0.3591
: 0-2369-1818
- - 35 - 8.4 0.2134 70.56 0.00005542 0.03575 0.2136 0.3178
33 - - - 8 0.2032 64 0.00005027 0.03243 0.1937 0.2883
- 32 - - 7.950 0.2019 65.20 0.00004964 0.03203 0.1913 0.2847
A - - - 0.20 7.874 0.2000 62 0.00004869 0.03142 0.1877 0.2793
- - 36 - 7.6 0.1930 57.76 0.00004536 0.02927 0.1748 0.2602
- - - 0.18 7.087 0.1800 50.23 0.00003945 0.02545 0.1520 0.2263
- 33 - - 7.080 0.1798 50.13 0.00003937 0.02540 0.1517 0.2258
34 - - - 7 0.1778 49 0.00003848 0.02483 0.1483 0.2207
- - 37 - 6.8 0.1727 46.24 0.00003632 0.02343 0.1400 0.2083
- 34 - - 6.305 0.1601 39.75 0.00003122 0.02014 0.1203 0.1790
- - - 0.16 6.299 0.1600 39.68 0.00003116 0.02011 0.1201 0.1788
- - 38 - 6 0.1524 36 0.00002827 0.01824 0.1090 0.1622
- 35 - - 5.615 0.1426 31.53 0.00002476 0.01597 0.09543 0.1420
- - - 0.14 5.512 0.1400 30.38 0.00002386 0.01539 0.09196 0.1368
- - 39 - 5.2 0.1321 27.04 0.00002124 0.01370 0.08186 0.1218
35 36 - - 5.000 0.1270 25 0.00001963 0.01267 0.07565 0.1126
- - 40 - 4.8 0.1219 23.04 0.00001810 0.01167 0.06976 0.1037
- - - 0.12 4.724 0.1200 22.32 0.00001753 0.01131 0.06756 0.1006
- 37 - - 4.453 0.1131 19.83 0.00001557 0.01005 0.06001 0.08934
- - 41 - 4.4 0.1118 19.36 0.00001521 0.009810 0.05812 0.08721
36 - 42 - 4 0.1016 16.00 0.00001257 0.008107 0.04845 0.07207
- 38 - - 3.965 0.1007 15.72 0.00001235 0.007968 0.04760 0.07084
- - - 0.10 3.937 0.1000 15.50 0.00001217 0.0007854 0.04690 0.06982
- - 43 - 3.6 0.09114 12.96 0.00001018 0.006567 0.03923 0.05838
- 39 - - 3.531 0.08969 12.47 0.000009794 0.006319 0.03775 0.05618
- - 44 - 3.2 0.08138 10.24 0.000008042 0.005819 0.03099 0.04613
- 40 - - 3.145 0.07987 9.891 0.000007768 0.0005012 0.02994 0.04456
- 41 45 - 3.800 0.07113 7.842 0.000006159 0.003973 0.02374 0.03532
- 42 - - 2.494 0.06334 6.219 0.000004884 0.003151 0.01882 0.02801
- - 46 - 2.4 0.06096 5.760 0.000004528 0.002929 0.01744 0.02595
- 43 - - 2.221 0.05641 4.932 0.000003873 0.002495 0.01498 0.02222
- - 47 - 2 0.05080 4.000 0.000003142 0.002027 0.01211 0.01802
- 44 - - 1.987 0.05023 3.911 0.000003072 0.001982 0.01184 0.01762
- - - 0.05 1.969 0.05000 3.877 0.000003045 0.001963 0.01174 0.01745
- 45 - - 1.761 0.04473 3.102 0.000002436 0.001572 0.009383 0.01398
- - 48 - 1.6 0.04064 2.560 0.000002011 0.001297 0.007750 0.01153
- 46 - - 1.568 0.03984 2.460 0.000001931 0.001246 0.007446 0.01108
- 47 - - 1.397 0.03547 1.951 0.000001532 0.0009884 0.005904 0.008787
- 48 - - 1.224 0.03159 1.547 0.000001215 0.0007838 0.004683 0.006968
- - 49 - 1.2 0.03048 1.440 0.000001131 0.0007297 0.004359 0.006487
- 49 - - 1.108 0.02813 1.227 0.000009635 0.0006216 0.003713 0.005526
- - 50 - 1 0.02540 1.000 0.000007854 0.0005067 0.003027 0.004505
- 50 - - 0.986 0.02505 0.9728 0.000007641 0.0004929 0.002945 0.004382
NOTE : B.W.G. - Birmingham Iron Wire Gauge
A.W.G. - American Wire Gauge
S.W.G. - British Standard Wire Gauge
mm.g. - Millimeter Gauge
THAI-YAZAKI TECHNICAL DATA
A6
Continuous Current Rating
for Each Condition of Wires & Cables
1. Maximum allowable current carrying capacities for the insulated cables installed in location where the
ambient temperature is not exceed 40oC shall not be less than those stated in the tables.
2. In location where the ambient temperature differ from 40oC (Install in free air) and 30oC ( Install in ground ).
: 0-2369-1818
The multiplier in the table below shall be used to obtain the maximum allowble current carrying capacities.
A Multiplier
Temperature In air In ground
(Ambient temperature 40oC) (Ambient temperature 30oC)
(oC) Insulation grade Insulation grade
70 oC 90 oC 70 oC 90 oC
21-25 1.23 1.14 1.06 1.04
26-30 1.16 1.09 1 1
31-35 1.08 1.05 0.94 0.96
36-40 1 1 0.87 0.91
41-45 0.91 0.95 0.79 0.87
46-50 0.82 0.89 0.71 0.82
51-55 0.71 0.84 0.61 0.77
56-60 0.58 0.78 0.5 0.71
61-65 0.41 0.71 0.35 0.65
66-70 - 0.63 - 0.58
71-75 - 0.54 - 0.5
76-80 - 0.45 - 0.41
81-85 - 0.32 - 0.29
86-90 - - - -
3. In a single conduit where the conductors are installed, the allowable ampacity of each conductor
shall be reduced as shown in the following table.
Remark : For multicore cables, the number of core is counted as number of wire by excepting the ground.
* Ref to MEA (Metropolitan Electricity Authority)
A : 0-2369-1818
Temperature
o
C
Correction Factor
Copper Aluminum
Reciprocal of Factor
Copper Aluminum
0 1.085 1.088 0.921 0.919
5 1.063 1.064 0.941 0.940
10 1.041 1.042 0.961 0.960
15 1.020 1.021 0.980 0.980
20 1.000 1.000 1.000 1.000
25 0.981 0.980 1.020 1.020
30 0.962 0.961 1.039 1.040
35 0.944 0.943 1.059 1.060
40 0.927 0.925 1.079 1.081
45 0.911 0.908 1.098 1.101
50 0.895 0.892 1.118 1.121
55 0.879 0.876 1.138 1.141
60 0.864 0.861 1.157 1.161
65 0.850 0.846 1.177 1.181
70 0.836 0.832 1.197 1.202
75 0.822 0.819 1.216 1.222
80 0.809 0.805 1.236 1.242
85 0.797 0.792 1.255 1.262
90 0.784 0.780 1.275 1.282
Where :
k = temperature correction factor of conductor
k1 = reciprocal of k
= constant mass temperature coefficient at 20 oC per oC
= 0.00393 for copper (based on 100% conductivity)
= 0.00403 for aluminum (based on 61% conductivity)
= referred temperature, oC
D : Overall diameter of cable
Number of core Single core
multi core
: 0-2369-1818
Type of cable
A
Unshield Cable
Round conductor
8D
Sector shape conductor
12D 60D
PVC & PE Sheath
Shield Cable 10D 12D 8D
Wire armoured cable 10D 12D 10D
Lead sheathed 10D 12D 10D
Corrugated metal armoured cable - - 8D
Flat tape armoured cable - - 8D
Al. flat sheathed cable 20D 20D 20D
Al. corrugated sheathed cable 15D 15D 15D
Al. solid conductor - - 10D
Cabtyre cable 6D - 4D
Note : When cable grip is used is should cover more than 500 mm. in length of the cable end and be bound to
the cable sheath
A : 0-2369-1818
k2 = AC/DC resistance ratio of conductor
S = skin effect factor
P = proximity effect factor
S = X 4
192 + 0.8X4
Where :
8f
X =
Ro k1 104
f = supply frequency, Hz
Ro = DC resistance of conductor at 20 oC, /km
k1 = reciprocal factor of temperature correction factor
X 4 d1 ) 2 {0.312 d1 2 1.18
P = ( (s ) + }
192 + 0.8X4 s X4
+ 0.27
192 + 0.8X4
Where :
X = 0.8 X
d1 = diameter of conductor, mm
S = distance between conductor axes, mm
NYLON
NYLON
XLPE
PVC
XLPE
ERC
CR
BR
PVC
PE
ERC
CR
BR
PE
Acetone
Aniline
: 0-2369-1818 A
Chlorine Gas
Ozone
Ethanol Bromine
Ethyleneglycol Nirtic Acid, conc.
Xylene Nitric Acid, 10%
Glycerin Fuming Nitric Acid
Cresol Tap Water
Chloroform Sea Water
Material
Designation
Chemical structure
Polyvinyl Chloride
PVC
(CH2-CH )n
Low Density
Polyethylene
PE
(CH2-CH2)n
Cross-liked
Polyethylene
XLPE
~CH2-CH-CH2~
Polyisoprene
NR
CH3
Styrene Butadiene
Copolymer
SBR
[(CH2-CH=CH-CH2)x
Polyisprene
CR
CI
Chlorosulphonated
Polyethylene
CSM
CI
: 0-2369-1818
CI ~CH2-CH-CH2~ (CH2-C=CH- (CH2- CH)y]n (CH2-C=CH- [(CH2)x-CH
THAI-YAZAKI
Brittleness Temp. o
C ~-40 <-70 <-70 -55 ~ -58 -30 ~ -65 -30 ~ -50 -20 ~ -50
Softening Temp. o
C 120 - 140 100 - 115
TECHNICAL DATA
Thermal Expansion / oC 0.7 - 2.5X10-4 1.6 - 1.8X10-4 1.6 - 1.8X10-4 1.8X10-4 1.8X10-4 1.9X10- 4 1.8X10- 4
Thermal Conductivity Cal / cm sec o
C 3.0 - 4.0X10-4 8.0X10-4 8.0X10-4 5.1X10-4 5.8X10-4 5.6X10-4 6.3X10-4
Specific Heat Cal / C g
o
0.3- 0.5 0.55 0.55 0.52 - 0.52
Tensile Strength kg / mm2 1.5 - 2.5 1.5 - 2.0 1.8 - 3.0 0.8 - 3.0 0.4 - 3.0 0.7 - 3.0 0.5 - 2.0
Elongation % 200 - 400 300 - 700 300 - 700 300 - 700 100 - 700 400 - 900 100 - 500
Abrasion Resistance Excellent Good Excellent Good Good Good Good
Voltage Breakdown kv / mm 20 - 30 30 - 50 30 - 50 16 - 32 16 - 30 15 - 25 16 - 32
Volume Resistivity cm 1012 - 1015 >1016 >1016 1015 1014 - 1015 1010 - 1012 1013 - 1014
Dielectric Constant 5.7 2.2 - 2.4 2.2 - 2.4 3-5 3-5 7 - 10
Dissipation Factor (tan ) 0.1 - 0.03 <0.0005 <0.0005 0.3 - 0.5 2-5 1.7 - 4
Weathering Good Inferior* Inferior* Poor Poor Excellent Good
Ozone Resistance Excellent Excellent Excellent Poor Inferior Good Good
Flame Resistance Self - Extinguish Burns Burns Burn Burn Self - Extinguish Self - Extinguish
Track Resistance Inferior Excellent Excellent Fair Fair Inferior Good
Water Resistance Fair Excellent Excellent Fair Fair Fair Fair
Acid Resistance Excellent Good Good Good Fair Excellent Good
Alcari Resistance Excellent Excellent Excellent Good Good Excellent Excellent
Oil Resistance Good Excellent Excellent Poor Inferior Good Fair
Solvent Resistance Fair Excellent Excellent Inferior Inferior Fair Fair
* Improved to good with mixture of carbon black.
PROPERTIES OF INSULATION AND JACKET MATERIALS
GENERAL COMPARISON DATA (Continued)
Material Ethylene Propylene Hexafluoropropylene Polyorganosiloxane Polypropylene Polytetra Polychloro Polyamide
Copolymer Vinylidenefluoride Fluoroethylene Trifluoroethylene
Copolymer
Designation EPM, EPDM FPM Q PP PTFE PCTFE Nylon(12)
Chemical structure [(CH2- CH2)x CF F
3
F
F F F F
: 0-2369-1818
R
(CH2- CH)n [HN(CH2)11C]n
(CH - CH2)y]n [( C-C)X(CH2-C)y]n (Si - O)n (C - C)n (C - C)n
CH3 o
THAI-YAZAKI
CH F F F R F F CI F
3
Density 0.86 - 0.87 1.82 - 1.85 0.97 - 1.40 0.9 - 0.915 2.13 - 2.2 2.1 1.01 - 1.02
Hardness (Shore) 40-85 60-90 50-85 R85-110 D50-65 R110-115 R100-110
Max. Operating Temp. o
C 90 200 180 80 260 180 90
Emergency Temp. Rating o
C
Short Circuit Temp. Rating o
C 150 310 120
Brittleness Temp. o
C -40 - -60 -44 - -60 -70 - -100 <-70 <-70 -70
A13
Softening Temp. o
C 210 170 -180
TECHNICAL DATA
Thermal Expansion / oC 1.6X10-4 2.6X10-4 6.0 - 8.5X10- 5 10X10-5 4.5 - 7.0X10-5 12X10-5
Thermal Conductivity Cal / cm sec o
C 5.5X10-4 5.7X10-4 2.8X10-4 6X10-4 6X10-4 5.9 - 8.3X10-4
Specific Heat Cal / C g
o
0.46 0.25 0.22 0.62
Tensile Strength kg / mm2 0.5 - 1.5 1.5 - 2.5 0.3 - 1.0 2.0 - 4.0 1.4 - 2.1 2.8 - 3.5 5.0 - 6.0
Elongation % 300-700 200-600 50-300 200-700 200 10-100 180-285
Abrasion Resistance Good Good Fair Excellent Excellent Excellent Excellent
Voltage Breakdown kv / mm 20 - 35 24 20 - 40 20 - 32 15 - 30 10 - 20 20 - 30
Volume Resistivity cm 1014- 1015 10 -1014
12
1014-1015 >1016 >1018 1.2 - 1018 1014 - 1015
Dielectric Constant 3-5 6-7 3-4 2.0 - 2.2 2.0 2.24 - 2.8 3.5 - 4.5
Dissipation Factor (tan ) 0.2 - 0.8 0.1 - 1.0 0.0002 - 0.0006 <0.0002 0.0012 - 0.0036 0.03 - 0.06
Weathering Excellent Good Good Inferior* Excellent Excellent Inferior*
Ozone Resistance Excellent Good Excellent Excellent Excellent Excellent Good
Flame Resistance Burn Self - Extinguish Burn Burn No Burn No Burn Burn
Track Resistance Excellent Fair Excellent Excellent Excellent Excellent Good
Water Resistance Good Excellent Fair Excellent Excellent Excellent Excellent
Acid Resistance Excellent Excellent Poor Excellent Excellent Excellentt Good
Alcari Resistance Excellent Excellent Good Excellent Excellent Excellent Excellent
Oil Resistance Inferior* Excellent Fair Excellent Excellent Excellent Excellent
Solvent Resistance Poor Excellent Fair Excellent Excellent Excellentt Good
* Improved to good with mixture of carbon black.
A
Properties of Insulation and Jacket Materials
Thermal Properties
Deflection temperature of plastics under load [ASTM D648]
A : 0-2369-1818
Polyvinyl Choloride (Hard Type)
Polypropylene
Polyamide
Polytetrafluoroethylene
Temperature - degrees C
Operating Temperature
[ Max. point : Max Continuous Operating Temperature
Min.point : Brittleness Temperature ]
Polyvinyle Chloride, 80oC Grade
Polyvinyle Chloride, 75oC Grade
Polyvinyle Chloride, 60oC Grade
Cold Resisting Polyvinyle Chloride
Cross-Linked Polyethylene
Polyethylene
Nylon
Synthetic Natural Rubber
Chloroprene
Styrene-Butadiene Rubber
Ethylene-Propylene Rubber
Chlorosulphonated Polyethylene
(Hypalon)
Silicone
Teflon
-80 -60 -40 -20 0 20 40 60 80 100 120 140 160 180 200 220 240
Temperature - degrees C
Electrical Properties
34
Polyethylene &
Cross-linked Polyethylene
: 0-2369-1818 32
Kilo - Volts per Millimeter (kV/mm)
Chlorosulphonated
A 30
Polyethylene
(Hypalon) Ethylene Propylene Rubber
28
Polyamides Polypropylene
Polyvinyl Chloride
26
Natural Rubber
24
Fluoroelastomer
Styrene-Butadiene Rubber
22
Silicone Rubber
Chloroprene Rubber
20
Polytetrafluoroethylene
18
10 11 12 13 14 15 16 17
10 10 10 10 10 10 10 10
100
Silicon Rubber
Ethylene Propylene Rubber
Polyester
Dielectric loss Tangent (tan )
-1
10 Natural Rubber
Polyvinyl Chloride
Polyamides
10-2
Polytetrafluoroethylene
-3 Polypropylene
10
Cross - linked Polyethylene
Polychlorotrifluoroetylene
10-4
1 2 3 4 5 6 7 8
Dielectric Constant ( )
A : 0-2369-1818
CURRENT (AMPERE) A
VOLTAGE (VOLT) V (kV)
RESISTANCE (OHM) (k, M)
ELECTRIC POWER (WATT) W (kW, MW.)
: 0-2369-1818
ELECTRIC ENERGY
HORSE POWER
POWER FACTOR A
(WATT HOUR)
(COS )
Wh (kWh.)
HP
P.F.
FREQUENCY (HERTZ) Hz
CAPACITANCE (FARAD) F ( F , pF.)
APPARENT POWER (VOLTAMPERE) VA (kVA)
DIRECT CURRENT DC
ALTERNATING CURRENT AC
EFFICENCY Eff.
MAXIMUM VALUES (VOLTAMPERE) Em, Im
AVERAGE VALUES (VOLTAMPERE) Eav, lav
EFFECTIVE VALUES (VOLTAMPERE) E. I
INSTANTANEOUS VALUES (VOLTAMPERE) e, I
Electrical Formulas.
Electrical formulas for determining Ampere, Kilowatt, Kilovolt - Ampere and Horse Power
Alternating Current
Direct Current
Single Phase Three Phase
A = K W x 1000 A = K W x 1000 A = K W x 1000
V V x P.F. 1.73 x V x P.F.
A = K V A x 1000 A = K V A x 1000 A = K V A x 1000
V V 1.73 x V
A = HP x 746 A = HP x 746 A= HP x 746
V x (%Eff.) V x (%Eff.) x P.F. 1.73 x V x (%Eff.) x P.F.
KW = AxV K W = A x V x P.F. K W = A x V x 1.73 x P.F.
1000 1000 1000
K VA = A x V K VA = A x V K VA = A x V x 1.73
1000 1000 1000
HP = A x V x (%Eff.) HP = A x V x (%Eff.) x P.F. HP = A x V x 1.73(%Eff.) x P.F.
746 746 746
APPROXIMATE MOTER AMPERES PER TERMINAL
220 V ac = 4 amperes per H.P.
3 phase 200 V ac = 2.5 amperes per H.P.
3 phase 380 V ac = 1.41 amperes per H.P.
3 phase 440 V ac = 1 amperes per H.P.
3 phase 550 V ac = 1 amperes per H.P.
1. LENGTH 1 micron = 0.001 mm = 3.94 x 10-5 in.
1 mil = 0.0254 mm = 0.001 in
1 mm = 39.37 mils = 0.03937 in.
1 cm = 0.3937 in = 0.0328 ft.
: 0-2369-1818
1 inch = 25.4 mm = 0.083 ft. = 0.0278 yd. = 2.54 cm.
1 feet = 0.305 m = 0.33 yd.
1 yard = 0.914 m = 91.44 cm.
A 1 meter = 39.37 in = 3.28 ft. = 1.094 yd.
1 kilometer = 3,281 ft. = 1,094 yd. = 0.6213 mile
1 mile = 5,280 ft. = 1,760 yd. = 1,609 m = 1.609 km
2. AREA 1 MCM = 1000 CM (Circular Mil) = 0.5067 mm2 = 1/1000in2
1 CM = 0.0005067 mm2 = 0.0000007854 in2 = 0.7854 sq. mil.
1 mm2 = 1973 CM = 0.00155 in2 = 1,550 sq. mil.
1 in2 = 1273240 CM = 645.1 mm2 = 0.0069 ft.2
1 yd2 = 1,296 in2 = 0.83613 m2
1 m2 = 1,550 in2 = 10.7 ft.2 = 1.195 yd.2
1 km2 = 0.001562 mile2
1 mile2 = 27,880,000 ft.2 = 3,098,000 yd.2 = 2,590,000 m2 = 2.59 km2
3. VOLUME 1 cm3 = 0.061 in3
1 in3 = 16.39 cm3 = 0.0036 gal. = 0.0005787 ft.3
1I = 1,000 cm3 = 61.023 in3 = 0.2642 gal = 0.03531 ft.3
1 gal. = 3,785 cm3 = 231 in3 = 0.1337 ft.3 = 0.004951 yd.3
1 ft.3 = 28,317 cm3 = 1,728 in3 = 28.32 l. = 7.48 gal
1 yd3 = 46,656 in3 = 0.7646 m3
1 m3 = 61,023 in3 = 35.31 ft.3 = 1.308 yd3
4. WEIGHT 1 g. = 15.43 gr. = 0.03527 oz. = 0.002205 Ib.
1 oz. = 437.5 gr. = 28.35 g. = 0.0625 Ib.
1 Ib. = 7,000 gr. = 453.6 g. = 16 oz. = 0.4536 kg.
1 kg. = 15,432 gr. = 35.27 oz. = 2.205 Ib.
1 ton (short) = 2,000 Ib. = 907.2 kg. = 0.8928 ton (long)
1 ton (long) = 2,240 Ib. = 1.12 ton (short) = 1.016 ton (metric)
1 ton (metric) = 2,204.62 Ib.
5. ENERGY 1 Btu. = 1,055 joules = 778.1 ft.-lb = 252 g-cal. = 107.6 kg.-m.
= 0.2930 watt-hr.
1 watt-hr. = 3,600 joules = 2,655.4 ft. -lb. = 860 g-cal. = 367.1 kg.-m.
= 3.413 B.t.u. = 0.001341 hp.-hr.
1 hp.-hr. = 2,684,000 joules = 1,980,000 ft.-lb. = 273,700 kg.-cm.
= 745.6 watt-hr.
1 kw-hr. = 2,655,000 ft.-lb. = 367,100 kg.-m. = 1.34 hp.-hr.
6. POWER 1 watt = 44.26 ft.-lb./min = 6.199 kg-m/min = 0.001341 hp.
1 hp = 33,000 ft.-lb./min = 745.6 watts = 550 ft.-lb./sec.
= 76.04 kg-m/sec
1 kw. = 44,256.7 ft-lb./min = 101.979 kg-m/sec. = 1.341 hp.
= 1,000 watts.
7. TEMPERATURE Temp oC = 5/9 (temp oF-32)
Temp oF = (9/5 x temp oC) +32
: 0-2369-1818
SILVER Ag 108.6 10.50
STANDARD COPPER Cu 100.0 8.89
(ANNEALED) A
GOLD Au 72.5 19.30
ALUMINIUM AI 61.0 2.70
IRON Fe 13.0 7.78
TIN Sn 12.2 7.29
STEEL - 11.6 7.78
Conductor Materials
Specific resistance 20oC Temperature Mass
Material Ohm Ohm Ohm per coefficient, g per
per cm.cube per in.cube cir. mil-ft 20 C
o cu.cm.
The number of wires in the conductors of cables for fixed wiring.
Nominal Number Diameter Maximum resistance of conductor
A : 0-2369-1818
cross-sectional
area
(mm )
2
of wires
in conductor
of wires
in conductor
(mm)
at 20 oC
(Ohm/km)
Single core & Multi core
The diameter of wires in the conductors of flexible cables and cords.
Motor ratings in HP at service voltage
220 V 380 V 440 V
Rating of
motor
Relay
setting
Max. Min
quick-blow cross
back-up section
A
HP
: 0-2369-1818
Full load Full load
current HP current
A A
Full load starter
HP current
A
A
A fuse of cables
A mm2
Size
mm2
A.C. Resistance
R (Ohm/km.)
Inductance
L (mH/km.)
Reactance
XL (Ohm/km.)
Impedance
Z (Ohm/km.)
: 0-2369-1818
0.5(1)
1.0(1)
43.1
21.7
A
0.60129
0.56214
0.1889
0.1766
43.1004
21.7007
1.0(7) 21.7 0.55004 0.1728 21.7007
1.5(1) 14.5 0.53540 0.1682 14.5010
1.5(7) 14.5 0.52489 0.1649 14.5009
2.5(1) 8.87 0.50866 0.1598 8.8714
2.5(7) 8.87 0.50102 0.1574 8.8714
4(1) 5.52 0.49847 0.1566 5.5222
4(7) 5.52 0.48701 0.1530 5.5221
6 3.69 0.47174 0.1482 3.6930
10 2.19 0.46505 0.1461 2.1949
16 1.38 0.44786 0.1407 1.3872
25 0.861 0.44532 0.1399 0.8723
35 0.6271 0.43481 0.1366 0.6418
50 0.4633 0.43481 0.1366 0.4830
70 0.321 0.42590 0.1338 0.3478
95 0.2314 0.42367 0.1331 0.2669
120 0.1837 0.41953 0.1318 0.2261
150 0.1492 0.41921 0.1317 0.1990
185 0.1196 0.41858 0.1315 0.1778
240 0.0915 0.41635 0.1308 0.1596
300 0.0736 0.41508 0.1304 0.1497
400 0.0583 0.41317 0.1298 0.1423
500 0.0464 0.41412 0.1301 0.1381
Size
No x mm2
A.C. Resistance
R (Ohm/km.)
Inductance
L (mH/km.)
Reactance
XL (Ohm/km.)
Impedance
Z (Ohm/km.)
A : 0-2369-1818
1 x 0.5
1 x 0.75
1 x 1.0
46.7000
31.1000
23.3000
0.69748
0.66743
0.66196
0.21912
0.20968
0.20796
46.7005
31.1007
23.3009
1 x 1.5 15.9000 0.63105 0.19825 15.9012
1 x 2.5 9.5500 0.59320 0.18636 9.5518
1x4 5.9200 0.58267 0.18305 5.9228
1x6 3.9500 0.54956 0.17265 3.9538
1 x 10 2.2900 0.54230 0.17037 2.2963
1 x 16 1.4500 0.52085 0.16363 1.4592
1 x 25 0.9334 0.51783 0.16268 0.9475
1 x 35 0.6630 0.49968 0.15698 0.6813
1 x 50 0.4621 0.49854 0.15662 0.4879
1 x 70 0.3258 0.48297 0.15173 0.3594
1 x 95 0.2469 0.48288 0.15170 0.2898
Size A.C. Resistance
No x mm2 R (Ohm/km.)
Inductance
L (mH/km.)
Reactance
XL (Ohm/km.)
Impedance
Z (Ohm/km.)
: 0-2369-1818
3 x 0.5
3 x 0.75
3 x 1.0
46.7000
31.1000
23.3000
0.39754
0.37363
A
0.35587
0.12489
0.11738
0.11180
46.7002
31.1002
23.3003
3 x 1.5 15.9000 0.33343 0.10475 15.9003
3 x 2.5 9.5500 0.30723 0.09652 9.5505
3x4 5.9200 0.29835 0.09373 5.9207
3x6 3.9500 0.27741 0.08715 3.9510
3 x 10 2.2900 0.26977 0.08475 2.2916
3 x 16 1.4500 0.25745 0.08088 1.4523
3 x 25 0.9335 0.25468 0.08001 0.9369
3 x 35 0.6632 0.24497 0.07696 0.6677
No x mm2
1 x 1.0 ( 1 )
1 x 1.0 ( 7 )
R (Ohm/km.)
21.6987
21.6987
L (mH/km.)
0.770
0.758
XL (Ohm/km.)
0.24186
0.23808
Z (Ohm/km.)
21.70000
21.70000
A : 0-2369-1818
1 x 1.5 ( 1 )
1 x 1.5 ( 7 )
1 x 2.5 ( 1 )
1 x 2.5 ( 7 )
14.4982
14.4982
8.8703
8.8705
0.735
0.720
0.693
0.675
0.23082
0.22632
0.21775
0.21222
14.50000
14.50000
8.87300
8.87300
1x4(1) 5.5201 0.657 0.20650 5.52400
1x4(7) 5.5204 0.639 0.20063 5.52400
1x6 3.6900 0.610 0.19176 3.69500
1 x 10 2.1896 0.575 0.18068 2.19700
1 x 16 1.3804 0.546 0.17162 1.39100
1 x 25 0.8610 0.522 0.16403 0.87649
1 x 35 0.6271 0.504 0.15837 0.64679
1 x 50 0.4633 0.490 0.15379 0.48816
1 x 70 0.3210 0.474 0.14896 0.35388
1 x 95 0.2314 0.466 0.14636 0.27380
1 x 120 0.1836 0.458 0.14393 0.23329
1 x 150 0.1491 0.458 0.14380 0.20715
1 x 185 0.1195 0.453 0.14243 0.18592
1 x 240 0.0914 0.450 0.14140 0.16837
1 x 300 0.0734 0.445 0.13994 0.15802
1 x 400 0.0582 0.441 0.13846 0.15018
1 x 500 0.0462 0.411 0.13844 0.14595
Size A.C. Resistance Inductance Reactance Impedance
No x mm2 R (Ohm/km.) L (mH/km.) XL (Ohm/km.) Z (Ohm/km.)
3 x 1.0 ( 1 ) 21.6997 0.37700 0.11848 21.70000
: 0-2369-1818
3 x 1.0 ( 7 )
3 x 1.5 ( 1 )
3 x 1.5 ( 7 )
3 x 2.5 ( 1 )
21.6997
14.4996
14.4996
8.8704 A
0.36500
0.35100
0.34000
0.32400
0.11470
0.11011
0.10687
0.10174
21.70000
14.50000
14.50000
8.87100
3 x 2.5 ( 7 ) 8.8704 0.31600 0.09928 8.87100
3x4(1) 5.5201 0.31400 0.09848 5.52100
3x4(7) 5.5202 0.30200 0.09495 5.52100
3x6 3.6899 0.28700 0.09014 3.69100
3 x 10 2.1902 0.28000 0.08801 2.19200
3 x 16 1.3795 0.26300 0.08265 1.38200
3 x 25 0.8701 0.26100 0.08187 0.87394
3 x 35 0.6273 0.25000 0.07856 0.63220
3 x 50 0.4635 0.25000 0.07856 0.47011
3 x 70 0.3214 0.24100 0.07570 0.33019
3 x 95 0.2319 0.23900 0.07505 0.24374
3 x 120 0.1843 0.23500 0.07376 0.19851
3 x 150 0.1499 0.23400 0.07364 0.16701
3 x 185 0.1205 0.23400 0.07342 0.14111
3 x 240 0.0928 0.23200 0.07275 0.11793
3 x 300 0.0752 0.23000 0.07228 0.10427
: 0-2369-1818
1 x 2.5 9.4485 0.4665 0.1466 9.4496
1x4 5.8782 0.4339 0.1363 5.8798
1x6 3.9273 0.4103 0.1289 3.9295
A 1 x 10 2.3335 0.3916 0.1230 2.3367
1 x 16 1.4665 0.3670 0.1153 1.4710
1 x 25 0.9272 0.3540 0.1112 0.9338
1 x 35 0.6684 0.3410 0.1070 0.6769
1 x 50 0.4938 0.3300 0.1037 0.5046
1 x 70 0.3423 0.3200 0.1005 0.3567
1 x 95 0.2469 0.3120 0.0982 0.2657
1 x 120 0.1961 0.3070 0.0965 0.2185
1 x 150 0.1594 0.3070 0.0965 0.1863
1 x 185 0.1279 0.3050 0.0958 0.1598
1 x 240 0.0983 0.3000 0.0943 0.1362
1 x 300 0.0793 0.2970 0.0934 0.1225
1 x 400 0.0633 0.2950 0.0927 0.1122
1 x 500 0.0510 0.2920 0.0914 0.1050
1 x 630 0.0415 0.2900 0.0911 0.1001
1 x 800 0.0348 0.2870 0.0903 0.0967
1 x 1000 0.0303 0.2830 0.0889 0.0939
: 0-2369-1818
1 x 2.5
1x4
1x6
1 x 10
9.4485
5.8782
3.9273
2.3335 A
0.4203
0.3877
0.3640
0.3453
0.1320
0.1218
0.1144
0.1085
9.4494
5.8795
3.9280
2.3360
1 x 16 1.4665 0.3208 0.1008 1.4699
1 x 25 0.9272 0.3080 0.0967 0.9322
1 x 35 0.6684 0.2950 0.0925 0.6748
1 x 50 0.4938 0.2840 0.0892 0.5018
1 x 70 0.3423 0.2740 0.0860 0.3529
1 x 95 0.2469 0.2660 0.0836 0.2607
1 x 120 0.1961 0.2610 0.0820 0.2125
1 x 150 0.1594 0.2610 0.0819 0.1792
1 x 185 0.1279 0.2590 0.0813 0.1516
1 x 240 0.0983 0.2540 0.0798 0.1266
1 x 300 0.0793 0.2510 0.0788 0.1118
1 x 400 0.0633 0.2490 0.0781 0.1006
1 x 500 0.0501 0.2460 0.0772 0.0925
1 x 630 0.0415 0.2440 0.0766 0.0871
1 x 800 0.0348 0.2410 0.0757 0.0834
1 x 1000 0.0303 0.2370 0.0743 0.0803
Size
No x mm2
A.C. Resistance
R (Ohm/km.)
Inductance
L (mH/km.)
Reactance
XL (Ohm/km.)
Impedance
Z (Ohm/km.)
: 0-2369-1818
3 x 1.5 15.4000 0.3273 0.1028 15.4000
3 x 2.5 9.4500 0.2996 0.0941 9.4500
3x4 5.8800 0.2787 0.0876 5.8810
A 3x6 3.9300 0.2663 0.0837 3.9310
3 x 10 2.3300 0.2567 0.0806 2.3310
3 x 16 1.4700 0.2440 0.0767 1.4720
3 x 25 0.9272 0.2445 0.0768 0.9304
3 x 35 0.6685 0.2381 0.0748 0.6727
3 x 50 0.4939 0.2342 0.0736 0.4994
3 x 70 0.3424 0.2308 0.0725 0.3500
3 x 95 0.2471 0.2248 0.0706 0.2561
3 x 120 0.1964 0.2235 0.0702 0.2086
3 x 150 0.1597 0.2251 0.0707 0.1747
3 x 185 0.1283 0.2267 0.0712 0.1468
3 x 240 0.0987 0.2240 0.0704 0.1212
3 x 300 0.0799 0.2222 0.0698 0.1061
3 x 400 0.0640 0.2216 0.0696 0.0946
Size
No x mm2
A.C. Resistance
R (Ohm/km.)
Inductance
L (mH/km.)
Reactance
XL (Ohm/km.)
Impedance
Z (Ohm/km.)
: 0-2369-1818
1 x 1.5
1 x 2.5
1x4
1x6
15.4287
9.4485
5.8782
3.9273 A
0.6374
0.5971
0.5575
0.5263
0.2002
0.1876
0.1752
0.1654
15.4300
9.4504
5.8808
3.9308
1 x 10 2.3335 0.5010 0.1574 2.3388
1 x 16 1.4664 0.4669 0.1467 1.4738
1 x 25 0.9271 0.4430 0.1392 0.9375
1 x 35 0.6683 0.4230 0.1329 0.6814
1 x 50 0.4937 0.4050 0.1272 0.5098
1 x 70 0.3421 0.3870 0.1217 0.3631
1 x 95 0.2467 0.3760 0.1181 0.2735
1 x 120 0.1958 0.3660 0.1149 0.2270
1 x 150 0.1591 0.3590 0.1128 0.1950
1 x 185 0.1275 0.3590 0.1127 0.1702
1 x 240 0.0978 0.3490 0.1096 0.1469
1 x 300 0.0787 0.3420 0.1074 0.1331
1 x 400 0.0626 0.3370 0.1057 0.1229
1 x 500 0.0502 0.3300 0.1035 0.1150
1 x 630 0.0425 0.2650 0.0834 0.0936
1 x 800 0.0359 0.2640 0.0830 0.0905
1 x 1000 0.0314 0.2620 0.0823 0.0881
: 0-2369-1818
1 x 2.5 9.4485 0.5509 0.1731 9.4501
1x4 5.8782 0.5113 0.1606 5.8804
1x6 3.9273 0.4801 0.1508 3.9302
A 1 x 10 2.3335 0.4548 0.1429 2.3378
1 x 16 1.4664 0.4207 0.1322 1.4724
1 x 25 0.9271 0.3970 0.1246 0.9355
1 x 35 0.6683 0.3770 0.1184 0.6787
1 x 50 0.4937 0.3590 0.1130 0.5064
1 x 70 0.3421 0.3410 0.1072 0.3585
1 x 95 0.2467 0.3300 0.1036 0.2675
1 x 120 0.1958 0.3190 0.1004 0.2201
1 x 150 0.1591 0.3130 0.0983 0.1870
1 x 185 0.1275 0.3130 0.0982 0.1610
1 x 240 0.0978 0.3030 0.0951 0.1364
1 x 300 0.0787 0.2960 0.0929 0.1217
1 x 400 0.0626 0.2900 0.0912 0.1106
1 x 500 0.0502 0.2830 0.0890 0.1022
1 x 630 0.0425 0.2190 0.0689 0.0809
1 x 800 0.0359 0.2180 0.6852 0.0773
1 x 1000 0.0314 0.2160 0.0678 0.0747
Size
No x mm2
A.C. Resistance
R (Ohm/km.)
Inductance
L (mH/km.)
Reactance
XL (Ohm/km.)
Impedance
Z (Ohm/km.)
: 0-2369-1818
3 x 1.5
3 x 2.5
3x4
3x6
15.3997
9.4495
5.8803
3.9301 A
0.3273
0.2996
0.2787
0.2663
0.1028
0.0941
0.0876
0.0837
15.4000
9.4500
5.8810
3.9310
3 x 10 2.3296 0.2567 0.0806 2.3310
3 x 16 1.4700 0.2440 0.0767 1.4720
3 x 25 0.9272 0.2445 0.0768 0.9304
3 x 35 0.6685 0.2381 0.0748 0.6727
3 x 50 0.4939 0.2342 0.0736 0.4994
3 x 70 0.3424 0.2308 0.0725 0.3500
3 x 95 0.2462 0.2248 0.0706 0.2561
3 x 120 0.1964 0.2235 0.0702 0.2086
3 x 150 0.1567 0.2251 0.0707 0.1747
3 x 185 0.1283 0.2267 0.0712 0.1468
3 x 240 0.0987 0.2240 0.0704 0.1212
3 x 300 0.0799 0.2222 0.0698 0.1061
3 x 400 0.0640 0.2216 0.0696 0.0946
: 0-2369-1818
1 x 16 1.4700 0.577 0.18126 1.48100
1 x 25 0.9271 0.549 0.17252 0.94302
1 x 35 0.6683 0.531 0.16691 0.68883
A 1 x 50 0.4937 0.513 0.16127 0.51937
1 x 70 0.3420 0.500 0.15691 0.37628
1 x 95 0.2465 0.484 0.15218 0.28969
1 x 120 0.1956 0.476 0.14962 0.24626
1 x 150 0.1588 0.468 0.14713 0.21649
1 x 185 0.1272 0.462 0.14509 0.19296
1 x 240 0.0973 0.454 0.14258 0.17259
1 x 300 0.0780 0.453 0.14218 0.16218
1 x 400 0.0617 0.442 0.13893 0.15203
1 x 500 0.0490 0.438 0.13773 0.14617
1 x 630 0.0390 0.435 0.13654 0.14200
1 x 800 0.0318 0.431 0.13550 0.13918
1 x 1000 0.0267 0.427 0.13413 0.13677
Size
No x mm2
A.C. Resistance
R (Ohm/km.)
Inductance
L (mH/km.)
Reactance
XL (Ohm/km.)
Impedance
Z (Ohm/km.)
: 0-2369-1818
1 x 35
1 x 50
1 x 70
0.6683
0.4937
0.3421 A
0.4917
0.4679
0.4441
0.1545
0.1470
0.1395
0.6859
0.5151
0.3694
1 x 95 0.2466 0.4242 0.1333 0.2803
1 x 120 0.1957 0.4110 0.1291 0.2345
1 x 150 0.1589 0.3993 0.1255 0.2025
1 x 185 0.1274 0.3880 0.1220 0.1764
1 x 240 0.0976 0.3740 0.1175 0.1527
1 x 300 0.0785 0.3640 0.1144 0.1387
1 x 400 0.0624 0.3540 0.1113 0.1276
1 x 500 0.0499 0.3460 0.1086 0.1195
1 x 630 0.0433 0.3360 0.1056 0.1130
1 x 800 0.0334 0.3280 0.1030 0.1083
1 x 1000 0.0288 0.3190 0.1001 0.1042
Size
No x mm2
A.C. Resistance
R (Ohm/km.)
Inductance
L (mH/km.)
Reactance
XL (Ohm/km.)
Impedance
Z (Ohm/km.)
A : 0-2369-1818
1 x 10
1 x 16
1 x 25
1 x 35
2.3335
1.4664
0.9271
0.6683
0.4519
0.4221
0.4003
0.3801
0.1420
0.1326
0.1258
0.1194
2.3378
1.4724
0.9356
0.6789
1 x 50 0.4937 0.3619 0.1137 0.5066
1 x 70 0.3421 0.3420 0.1074 0.3586
1 x 95 0.2467 0.3260 0.1025 0.2671
1 x 120 0.1959 0.3150 0.0989 0.2194
1 x 150 0.1591 0.3070 0.0964 0.1860
1 x 185 0.1276 0.2970 0.0934 0.1582
1 x 240 0.0979 0.2890 0.0907 0.1335
1 x 300 0.0788 0.2840 0.0892 0.1191
1 x 400 0.0628 0.2790 0.0877 0.1079
1 x 500 0.0503 0.2750 0.0864 0.1000
1 x 630 0.0408 0.2680 0.0843 0.0937
1 x 800 0.0340 0.2620 0.0822 0.0890
1 x 1000 0.0295 0.2540 0.0798 0.0850
Size
No x mm2
A.C. Resistance
R (Ohm/km.)
Inductance
L (mH/km.)
Reactance
XL (Ohm/km.)
Impedance
Z (Ohm/km.)
: 0-2369-1818
1 x 10 2.33017 0.716 0.22491 2.34100
1 x 16 1.47038 0.684 0.21488 1.48600
1 x 25 0.92710 0.649 0.20390 0.94926
1 x 35 0.66830 A 0.626 0.19650 0.69659
1 x 50 0.49360 0.602 0.18911 0.52859
1 x 70 0.34200 0.578 0.18170 0.38727
1 x 95 0.24651 0.564 0.17724 0.30361
1 x 120 0.19559 0.550 0.17266 0.26090
1 x 150 0.15870 0.539 0.16938 0.23211
1 x 185 0.12710 0.528 0.16591 0.20900
1 x 240 0.09713 0.516 0.16206 0.18894
1 x 300 0.07788 0.507 0.15920 0.17723
1 x 400 0.06153 0.506 0.15884 0.17034
1 x 500 0.04880 0.500 0.15699 0.16440
1 x 630 0.03852 0.490 0.15385 0.15860
1 x 800 0.03122 0.481 0.15121 0.15440
1 x 1000 0.02615 0.471 0.14811 0.15040
Size
No x mm2
A.C. Resistance
R (Ohm/km.)
Inductance
L (mH/km.)
Reactance
XL (Ohm/km.)
Impedance
Z (Ohm/km.)
A : 0-2369-1818
1 x 16
1 x 25
1 x 35
1 x 50
1.4703
0.9271
0.6683
0.4936
0.64100
0.61100
0.58900
0.56900
0.20138
0.19195
0.18504
0.17876
1.48400
0.94673
0.69343
0.52498
1 x 70 0.3419 0.54800 0.17216 0.38282
1 x 95 0.2466 0.53000 0.16650 0.29751
1 x 120 0.1957 0.51700 0.16242 0.25432
1 x 150 0.1586 0.50900 0.15991 0.22521
1 x 185 0.1271 0.49800 0.15645 0.20158
1 x 240 0.0971 0.48700 0.15300 0.18123
1 x 300 0.0778 0.47900 0.15048 0.16939
1 x 400 0.0612 0.47100 0.14797 0.16013
1 x 500 0.0487 0.46400 0.14577 0.15370
1 x 630 0.0387 0.45600 0.14326 0.14840
1 x 800 0.0316 0.44900 0.14106 0.14456
1 x 1000 0.0271 0.44000 0.13823 0.14087
: 0-2369-1818
3 x 25 0.1195 0.3810 0.9348 0.9271
3 x 35 0.1136 0.3620 0.6779 0.6683
3 x 50 0.1076 0.3430 0.5053 0.4937
3 x 70
3 x 95
0.1018
0.0969
A
0.3240
0.3080
0.3569
0.2650
0.3421
0.2467
3 x 120 0.0935 0.2980 0.2171 0.1959
3 x 150 0.0909 0.2890 0.1833 0.1592
3 x 185 0.0883 0.2810 0.1552 0.1277
3 x 240 0.0852 0.2710 0.1299 0.0980
3 x 300 0.0829 0.2640 0.1146 0.0791
3 x 400 0.0807 0.2570 0.1025 0.0632
Size
No x mm 2
A.C. Resistance
R (Ohm/km.)
Inductance
L (mH/km.)
Reactance
XL (Ohm/km.)
Impedance
Z (Ohm/km.)
A : 0-2369-1818
1 x 35
1 x 50
1 x 70
1 x 95
0.6683
0.4937
0.3421
0.2466
0.4917
0.4679
0.4441
0.4242
0.1545
0.1470
0.1395
0.1333
0.6859
0.5151
0.3694
0.2803
1 x 120 0.1957 0.4110 0.1291 0.2345
1 x 150 0.1589 0.3993 0.1255 0.2025
1 x 185 0.1274 0.3880 0.1220 0.1764
1 x 240 0.0976 0.3740 0.1175 0.1527
1 x 300 0.0785 0.3640 0.1144 0.1387
1 x 400 0.0624 0.3540 0.1113 0.1276
1 x 500 0.0499 0.3460 0.1086 0.1195
1 x 630 0.0403 0.3360 0.1056 0.1130
1 x 800 0.0334 0.3280 0.1030 0.1083
1 x 1000 0.0288 0.3190 0.1001 0.1042
Size
No x mm2
1 x 35
A.C. Resistance
R (Ohm/km.)
0.6684
Inductance
L (mH/km.)
0.2950
Reactance
XL (Ohm/km.)
0.0925
Impedance
Z (Ohm/km.)
0.6748
: 0-2369-1818
1 x 50
1 x 70
1 x 95
1 x 120
0.4938
0.3423
0.2469
0.1961 A
0.2840
0.2740
0.2660
0.2610
0.0892
0.0860
0.0836
0.0820
0.5018
0.3529
0.2607
0.2125
1 x 150 0.1594 0.2610 0.0819 0.1792
1 x 185 0.1279 0.2590 0.0813 0.1516
1 x 240 0.0983 0.2540 0.0798 0.1266
1 x 300 0.0793 0.2510 0.0788 0.1118
1 x 400 0.0633 0.2490 0.0781 0.1006
1 x 500 0.0501 0.2460 0.0772 0.0925
1 x 630 0.0415 0.2440 0.0766 0.0871
1 x 800 0.0348 0.2410 0.0757 0.0834
1 x 1000 0.0303 0.2370 0.0743 0.0803
Size
No x mm2
1 x 35
A.C. Resistance
R (Ohm/km.)
0.66831
Inductance
L (mH/km.)
0.681
Reactance
XL (Ohm/km.)
0.21386
Impedance
Z (Ohm/km.)
0.70169
A : 0-2369-1818
1 x 50
1 x 70
1 x 95
1 x 120
0.49361
0.34200
0.24650
0.19550
0.644
0.618
0.596
0.580
0.20229
0.19419
0.18726
0.18223
0.53345
0.39329
0.30956
0.26726
1 x 150 0.15870 0.568 0.17853 0.23887
1 x 185 0.12711 0.555 0.17428 0.21571
1 x 240 0.09711 0.540 0.16955 0.19539
1 x 300 0.07784 0.528 0.16596 0.18331
1 x 400 0.06150 0.517 0.16234 0.17360
1 x 500 0.04868 0.506 0.15909 0.16637
1 x 630 0.03865 0.495 0.15557 0.16030
1 x 800 0.03140 0.485 0.15249 0.15569
1 x 1000 0.02633 0.474 0.14892 0.15123
Size A.C. Resistance Inductance Reactance Impedance
No x mm2 R (Ohm/km.) L (mH/km.) XL (Ohm/km.) Z (Ohm/km.)
1 x 400 0.0614 0.5800 0.1822 0.1923
: 0-2369-1818
1 x 500
1 x 630
0.0485
0.0385
A
0.5634
0.5521
0.1770
0.1734
0.1835
0.1777
1 x 800 0.0312 0.5415 0.1701 0.1730
: 0-2369-1818
CONDUCTOR
INSULATION
B
1
CABLE STRUCTURE
CONDUCTOR : Solid and stranded annealed copper,
Size 0.5 mm2 up to 150 mm2
INSULATION : PVC, Any color
o
CLASSIFICATION : Maximum conductor temperature 70 C
Circuit voltage not exceeding 300 volts
TESTING VOLTAGE : 2,000 volts
REFERENCE : TIS 11-2531, Table 1
TABLE 1
Nominal Number Insulation Max. Minimum Maximum Cable Standard
cross and thickness overall insulation continuous weight length
area
(mm2) : 0-2369-1818
sectional diameter
of wire
(No./mm) (mm)
diameter
(mm)
resistance
o
70 C
(M- km)
at current rating
in free air
(Ampere)
(approx.)
(kg/km) (m)
0.5 1/0.80 0.6 2.6 0.0146 8 9 100/C
1 1/1.13 0.6 2.9 0.0115 12 14 100/C
1 7/0.43 0.6 3.1 0.0110 12 15 100/C
1.5 1/1.38 0.6 3.2 0.0100 16 19 100/C
1.5 7/0.53 0.6 3.4 0.0094 16 21 100/C
2.5 1/1.78 0.7 3.8 0.0092 23 31 100/C
2.5 7/0.67 0.7 4.1 0.0084 23 32 100/C
4 1/2.25 0.8 4.5 0.0086 31 47 100/C
4 7/0.85 0.8 4.9 0.0078 31 50 100/C B
6 7/1.04 0.8 5.6 0.0066 42 70 100/C
10
16
7/1.35
7/1.70
1.0
1.0
7.0
8.2
0.0064
0.0053
61
83
120
180
100/C
100/C
1
25 7/2.14 1.2 10.0 0.0051 113 280 100/C
35 19/1.53 1.2 11.5 0.0043 141 370 100/C
50 19/1.78 1.4 13.0 0.0044 175 500 500/D
70 19/2.14 1.4 15.0 0.0037 221 700 500/D
95 19/2.52 1.6 17.5 0.0036 275 1,000 500/D
120 37/2.03 1.6 19.0 0.0032 321 1,200 500/D
150 37/2.25 1.8 21.5 0.0033 368 1,500 500/D
C : Packing in coil.
D : Packing in drum.
: 0-2369-1818
CONDUCTOR
INSULATION
B
1
CABLE STRUCTURE
CONDUCTOR : Solid and stranded annealed copper,
Size 0.5 mm2 up to 500 mm2
INSULATION : PVC, Any color
o
CLASSIFICATION : Maximum conductor temperature 70 C
Circuit voltage not exceeding 750 volts
TESTING VOLTAGE : 2,500 volts
REFERENCE : TIS 11-2531, Table 4
TABLE 4
Nominal Number Insulation Max. Minimum Maximum Cable Standard
cross and thickness overall insulation continuous weight length
area
(mm2) : 0-2369-1818
sectional diameter
of wire
(No./mm) (mm)
diameter
(mm)
resistance
o
70 C
(M- km)
at current rating
in free air
(Ampere)
(approx.)
(kg/km) (m)
0.5 1/0.80 0.8 3.0 0.0175 9 11 100/C
1 1/1.13 0.8 3.3 0.0141 13 17 100/C
1 7/0.43 0.8 3.5 0.0135 13 18 100/C
1.5 1/1.38 0.8 3.6 0.0123 17 22 100/C
1.5 7/0.53 0.8 3.8 0.0116 17 24 100/C
2.5 1/1.78 0.8 4.0 0.0102 23 32 100/C
2.5 7/0.67 0.8 4.3 0.0093 23 35 100/C
4 1/2.25 0.9 4.8 0.0094 32 49 100/C
4 7/0.85 0.9 5.2 0.0085 32 50 100/C B
6 7/1.04 0.9 5.8 0.0073 43 75 100/C
10 7/1.35 1.1 7.2 0.0069 60 120 100/C 1
16 7/1.70 1.1 8.4 0.0057 83 180 100/C
25 7/2.14 1.3 10.5 0.0054 114 280 100/C
35 19/1.53 1.3 11.5 0.0047 141 380 100/C
50 19/1.78 1.5 13.5 0.0046 175 500 500/D
70 19/2.14 1.5 15.5 0.0039 221 700 500/D
95 19/2.52 1.7 18.0 0.0038 275 1,000 500/D
120 37/2.03 1.7 19.5 0.0034 321 1,200 500/D
150 37/2.25 1.9 21.5 0.0034 367 1,500 500/D
185 37/2.52 2.1 24.0 0.0034 424 1,900 500/D
240 61/2.25 2.3 27.0 0.0033 505 2,500 500/D
300 61/2.52 2.5 30.0 0.0032 581 3,100 500/D
400 61/2.85 2.7 33.5 0.0030 675 3,900 500/D
500 61/3.20 3.1 38.5 0.0031 781 5,000 500/D
C : Packing in coil.
D : Packing in drum.
: 0-2369-1818
CONDUCTOR
INSULATION SHEATH
B
1
CABLE STRUCTURE
NUMBER OF CORE : 2-3 cores
CONDUCTOR : Solid and stranded annealed copper,
Size 0.5 mm2 up to 35 mm2 for 2-core
and up to 16 mm2 for 3-cores
INSULATION : PVC,
Color : 2 cores-Light gray, Black
3 cores-Light gray, Black and Red
SHEATH : PVC
Color : White
o
CLASSIFICATION : Maximum conductor temperature 70 C
Circuit voltage not exceeding 300 volts
TESTING VOLTAGE : 2,000 volts
REFERENCE : TIS 11-2531, Table 2
Number Nominal
of
core
cross
sectional
Number
and
diameter
Insulation Sheath
thickness thickness
Approx. overall
diameter(mm)
Minimum Maximum Cable Standard
insulation continuous weight length
resistance current (approx.)
: 0-2369-1818
area of wire at 70oC rating in
Lower limit Upper limit free air
(mm2) (No./mm) (mm) (mm) (M-km) (Ampere) (kg/km) (m)
4.4x6.8 0.0146 7 38 100/C
1 1/1.13 0.6 0.9 4.0x6.2 4.8x7.4 0.0115 11 50 100/C
1 7/0.43 0.6 0.9 4.0x6.4 5.0x7.8 0.0110 11 55 100/C
1.5 1/1.38 0.6 1.2 4.8x7.2 5.8x8.6 0.0100 15 75 100/C
1.5 7/0.53 0.6 1.2 4.9x7.4 6.0x9.2 0.0094 15 80 100/C
2.5 1/1.78 0.7 1.2 5.4x8.4 6.4x10.0 0.0092 20 100 100/C
2 2.5 7/0.67 0.7 1.2 5.6x8.8 6.8x10.5 0.0084 20 110 100/C
4 1/2.25 0.8 1.2 6.0x9.8 7.2x11.5 0.0086 27 150 100/C
4 7/0.85 0.8 1.2 6.2x10.0 7.6x12.0 0.0078 27 150 100/C
6 7/1.04 0.8 1.2 6.8x11.0 8.2x13.5 0.0066 35 200 100/C B
10 7/1.35 0.9 1.2 8.0x13.0 9.4x16.0 0.0059 49 310 100/C
16 7/1.70 1.0 1.2 9.2x16.0 11.0x18.5 0.0053 65 450 100/C
1
25 7/2.14 1.2 1.4 11.0x19.5 13.0x22.5 0.0051 88 700 500/D
35 19/1.53 1.2 1.4 12.0x22.0 14.5x25.0 0.0043 109 900 500/D
300 V 70oC PVC INSULATED AND SHEATHED FLAT TYPE, WITH GROUND
: 0-2369-1818
GROUND WIRE
CONDUCTOR
INSULATION
SHEATH
B
1
CABLE STRUCTURE
NUMBER OF CORE : 2-3 cores with safety-ground
CONDUCTOR : Solid and stranded annealed copper,
Sizes 1 mm2 up to 35 mm2
GROUND WIRE : Ground conductor size 1mm2 up 10 mm2
INSULATION : PVC
Color : 2 cores - Light gray and Black
3 cores - Light gray, Black and Red
Ground core - Green/Yellow
SHEATH : PVC
Color : White
o
CLASSIFICATION : Maximum conductor temperature 70 C
Circuit voltage not exceeding 300 volts
TESTING VOLTAGE : 2,000 volts
REFERENCE : TIS 11-2531, Table 11
TABLE 11
Number Nominal Number Insulation Nominal Ground Sheath Approx overall Minimum Maximum Cable Standard
cross
of sectional and thickness cross insulation thickness diameter (mm) insulation Continuous weight length
diameter sectional thickness resistance current (approx.)
core area
: 0-2369-1818
2
of wire area of
ground
conductor
(mm ) (No./mm) (mm) (mm ) (mm) (mm)
2
Lower limit Upper limit
at 70oC rating in
(M-km) (Ampere)
free air
(kg/km) (m)
1 1/1.13 0.6 1 0.6 0.9 4.0x8.4 4.8x10.0 0.0115 11 75 100/C
1 7/0.43 0.6 1 0.6 0.9 4.0x8.6 5.0x10.5 0.0110 11 80 100/C
1.5 1/1.38 0.6 1 0.6 1.2 4.8x9.4 5.8x11.5 0.0100 15 100 100/C
1.5 7/0.53 0.6 1 0.6 1.2 4.9x9.8 6.0x12.0 0.0094 15 110 100/C
2.5 1/1.78 0.7 1.5 0.6 1.2 5.4x10.5 6.4x13.0 0.0092 20 140 100/C
2.5 7/0.67 0.7 1.5 0.6 1.2 5.6x11.5 6.8x14.0 0.0084 20 140 100/C
2 4 1/2.25 0.8 2.5 0.6 1.2 6.0x12.5 7.2x15.0 0.0086 27 190 100/C
4 7/0.85 0.8 2.5 0.6 1.2 6.2x13.0 7.6x16.0 0.0078 27 210 100/C
6 7/1.04 0.8 4 0.6 1.2 6.8x15.0 8.2x17.5 0.0066 35 270 100/C B
10 7/1.35 0.9 4 0.6 1.2 8.0x17.0 9.4x20.0 0.0059 49 380 100/C
16 7/1.70 1.0 6 0.6 1.2 9.2x20.0 11.0x23.0 0.0053 65 550 100/C 1
25 7/2.14 1.2 6 0.6 1.4 11.0x24.0 13.0x27.0 0.0051 88 800 500/D
35 19/1.53 1.2 10 0.6 1.4 12.0x27.0 14.5x31.0 0.0043 109 1,100 500/D
: 0-2369-1818
VVR 300 V 70 C PVC INSULATED AND SHEATHED ROUND TYPE B 11
(TIS 11 TABLE 2 AND 3)
o
VVR - GRD 300 V 70 C PVC INSULATED AND SHEATHED ROUND TYPE B 14
WITH GROUND (TIS 11 TABLE 12)
o
VV, MEA TYPE B (1 CORE) 750 V 70 C PVC INSULATED AND SHEATHED, SINGLE CORE B 16
(TIS 11 TABLE 5)
o
VV, MEA TYPE B (2 CORE) 750 V 70 C PVC INSULATED AND SHEATHED, FLAT TYPE B 18
(TIS 11 TABLE 5)
o
VVF - GRD, 750 V 70 C PVC INSULATED AND SHEATHED, FLAT TYPE B 20
B MEA TYPE B - GRD WITH GROUND (TIS 11 TABLE 13)
: 0-2369-1818
CONDUCTOR
INSULATION
SHEATH
B
2
CABLE STRUCTURE
NUMBER OF CORE : Up to 4 cores
CONDUCTOR : Solid and stranded annealed copper,
Sizes 0.5 mm2 up to 35 mm2
INSULATION : PVC
Color : Single core - Light gray
2 cores - Light gray and Black
3 cores - Light gray, Black and Red
4 cores - Light gray, Black, Red and Blue
SHEATH : PVC
Color : White
o
CLASSIFICATION : Maximum conductor temperature 70 C
Circuit voltage not exceeding 300 V
TESTING VOLTAGE : 2,000 volts
REFERENCE : TIS 11-2531, Table 2 (Single core)
TIS 11-2531, Table 3 (Multi core)
Number
of
core
Nominal
cross
sectional
area
Number
and
diameter
of wire
Insulation
thickness
Sheath
thickness
Max.
overall
diameter
Minimum
insulation
resistance
at 70oC
Maximum
continuous
Cable Standard
weight
current rating in (approx.)
free air
length
: 0-2369-1818
(mm2) (No./mm) (mm) (mm) (mm) (M-km) (Ampere) (kg/km) (m)
0.5 1/0.80 0.6 0.9 4.4 0.0146 10 21 500/D
1 1/1.13 0.6 0.9 4.8 0.0115 15 28 500/D
1 7/0.43 0.6 0.9 5.0 0.0110 15 30 500/D
1.5 1/1.38 0.6 0.9 5.2 0.0100 19 34 500/D
1.5 7/0.53 0.6 0.9 5.4 0.0094 19 37 500/D
2.5 1/1.78 0.7 0.9 5.8 0.0092 26 48 500/D
1 2.5 7/0.67 0.7 0.9 6.2 0.0084 26 50 500/D
4 1/2.25 0.8 0.9 6.6 0.0086 35 65 500/D
4 7/0.85 0.8 0.9 7.0 0.0078 35 70 500/D
6 7/1.04 0.8 0.9 7.6 0.0066 46 95 500/D
B 10
16
7/1.35
7/1.70
0.9
1.0
0.9
1.2
8.6
11.0
0.0059
0.0053
64
87
140
220
500/D
500/D
25 7/2.14 1.2 1.2 12.5 0.0051 117 330 500/D
2 35 19/1.53 1.2 1.2 14.0 0.0043 144 430 500/D
D : Packing in drum.
of cross and thickness thickness insulation continuous weight length
sectional diameter diameter resistance current rating in (approx.)
core area of wire at 70oC free air
(mm2) (No./mm) (mm) (mm) (mm) (M-km) (Ampere) (kg/km) (m)
: 0-2369-1818
0.5
1
1
1.5
1/0.80
1/1.13
7/0.43
1/1.38
0.6
0.6
0.6
0.6
0.9
0.9
0.9
1.2
6.8
7.6
8.0
8.8
0.0146
0.0115
0.0110
0.0100
9
14
14
18
50
65
70
90
500/D
500/D
500/D
500/D
1.5 7/0.53 0.6 1.2 9.2 0.0094 18 100 500/D
2.5 1/1.78 0.7 1.2 10.0 0.0092 24 130 500/D
2 2.5 7/0.67 0.7 1.2 11.0 0.0084 24 140 500/D
4 1/2.25 0.8 1.2 11.5 0.0086 32 180 500/D
4 7/0.85 0.8 1.2 12.5 0.0078 32 200 500/D
6 7/1.04 0.8 1.2 13.5 0.0066 43 260 500/D
10 7/1.35 0.9 1.2 16.0 0.0059 60 380 500/D
16 7/1.70 1.0 1.4 19.0 0.0053 80 550 500/D
25 7/2.14 1.2 1.4 22.5 0.0051 107 850 500/D
35 19/1.53 1.2 1.4 25.5 0.0043 132 1,100 500/D
0.5 1/0.80 0.6 0.9 7.2 0.0146 7 55 500/D B
1 1/1.13 0.6 0.9 8.0 0.0115 11 75 500/D
1 7/0.43 0.6 0.9 8.4 0.0110 11 85 500/D 2
1.5 1/1.38 0.6 1.2 9.2 0.0100 15 110 500/D
1.5 7/0.53 0.6 1.2 9.6 0.0094 15 120 500/D
2.5 1/1.78 0.7 1.2 10.5 0.0092 20 160 500/D
3 2.5 7/0.67 0.7 1.2 11.5 0.0084 20 170 500/D
4 1/2.25 0.8 1.2 12.5 0.0086 27 230 500/D
4 7/0.85 0.8 1.2 13.0 0.0078 27 240 500/D
6 7/1.04 0.8 1.2 14.5 0.0066 36 320 500/D
10 7/1.35 0.9 1.2 17.0 0.0059 50 490 500/D
16 7/1.70 1.0 1.4 20.0 0.0053 67 750 500/D
25 7/2.14 1.2 1.8 25.0 0.0051 90 1,200 500/D
35 19/1.53 1.2 1.8 28.0 0.0043 110 1,500 500/D
0.5 1/0.80 0.6 0.9 7.8 0.0146 7 65 500/D
1 1/1.13 0.6 0.9 8.6 0.0115 10 90 500/D
1 7/0.43 0.6 0.9 9.0 0.0110 10 100 500/D
1.5 1/1.38 0.6 1.2 10.0 0.0100 13 130 500/D
1.5 7/0.53 0.6 1.2 10.5 0.0094 13 140 500/D
2.5 1/1.78 0.7 1.2 11.5 0.0092 18 190 500/D
4 2.5 7/0.67 0.7 1.2 12.5 0.0084 18 200 500/D
4 1/2.25 0.8 1.2 13.5 0.0086 25 280 500/D
4 7/0.85 0.8 1.2 14.0 0.0078 25 300 500/D
6 7/1.04 0.8 1.2 15.5 0.0066 33 400 500/D
10 7/1.35 0.9 1.4 19.0 0.0059 45 650 500/D
16 7/1.70 1.0v 1.4 22.0 0.0053 60 950 500/D
25 7/2.14 1.2 1.8 27.5 0.0051 81 1,500 500/D
35 19/1.53 1.2 1.8 30.5 0.0043 99 1,900 500/D
TISI permilted to increase the maximum overall diameter by 5%
D : Packing in drum.
300 V 70oC PVC INSULATED AND SHEATHED ROUND TYPE, WITH GROUND
: 0-2369-1818
GROUND WIRE
CONDUCTOR
INSULATION
SHEATH
B
2 CABLE STRUCTURE
NUMBER OF CORE : 2-4 cores with safety-ground
CONDUCTOR : Solid and stranded annealed copper,
Size 1 mm2 up to 35 mm2
GROUND WIRE : Ground conductor size 1 mm2 up 10 mm2
INSULATION : PVC
Color : 2 cores-Light gray and Black
3 cores-Light gray, Black and Red
4 cores-Light gray, Black, Red and Blue
SHEATH : PVC
Color : White
o
CLASSIFICATION : Maximum conductor temperature 70 C
Circuit voltage not exceeding 300 volts
TESTING VOLTAGE : 2,000 volts
REFERENCE : TIS 11-2531, Table 12
core
cross
of sectional
area
and
diameter
of wire
thickness cross insulation thickness overall
sectional thickness
area of
ground
diameter
insulation continuous weight length
resistance
at 70oC
current (approx.)
rating in
free air
: 0-2369-1818
conductor
(mm2) (No./mm) (mm) (mm2) (mm) (mm) (mm) (M-km) (Ampere) (kg/km) (m)
1 1/1.13 0.6 1 0.6 0.9 8.0 0.0115 14 75 500/D
1 7/0.43 0.6 1 0.6 0.9 8.4 0.0110 14 85 500/D
1.5 1/1.38 0.6 1 0.6 1.2 9.2 0.0100 18 100 500/D
1.5 7/0.53 0.6 1 0.6 1.2 9.6 0.0094 18 110 500/D
2.5 1/1.78 0.7 1.5 0.6 1.2 10.5 0.0092 24 140 500/D
2.5 7/0.67 0.7 1.5 0.6 1.2 11.5 0.0084 24 150 500/D
2 4 1/2.25 0.8 2.5 0.6 1.2 12.5 0.0086 32 200 500/D
4 7/0.85 0.8 2.5 0.6 1.2 13.0 0.0078 32 210 500/D
6 7/1.04 0.8 4 0.6 1.2 14.5 0.0066 43 290 500/D
10 7/1.35 0.9 4 0.6 1.2 16.0 0.0059 60 410 500/D
16 7/1.70 1.0 6 0.6 1.4 19.0 0.0053 80 600 500/D
25 7/2.14 1.2 6 0.6 1.4 22.5 0.0051 107 850 500/D
35 19/1.53 1.2 10 0.6 1.4 25.5 0.0043 132 1,200 500/D B
1 1/1.13 0.6 1 0.6 0.9 8.6 0.0115 11 95 500/D
1 7/0.43 0.6 1 0.6 0.9 9.0 0.0110 11 100 500/D 2
1.5 1/1.38 0.6 1 0.6 1.2 10.0 0.0100 15 120 500/D
1.5 7/0.53 0.6 1 0.6 1.2 10.5 0.0094 15 140 500/D
2.5 1/1.78 0.7 1.5 0.6 1.2 11.5 0.0092 20 180 500/D
2.5 7/0.67 0.7 1.5 0.6 1.2 12.5 0.0084 20 190 500/D
3 4 1/2.25 0.8 2.5 0.6 1.2 13.5 0.0086 27 260 500/D
4 7/0.85 0.8 2.5 0.6 1.2 14.0 0.0078 27 280 500/D
6 7/1.04 0.8 4 0.6 1.2 15.5 0.0066 36 370 500/D
10 7/1.35 0.9 4 0.6 1.2 18.5 0.0059 50 550 500/D
16 7/1.70 1.0 6 0.6 1.4 22.0 0.0053 67 800 500/D
25 7/2.14 1.2 6 0.6 1.8 27.5 0.0051 90 1,200 500/D
35 19/1.53 1.2 10 0.6 1.8 30.5 0.0043 110 1,600 500/D
1 1/1.13 0.6 1 0.6 0.9 9.2 0.0115 10 120 500/D
1 7/0.43 0.6 1 0.6 0.9 9.8 0.0110 10 130 500/D
1.5 1/1.38 0.6 1 0.6 1.2 11.0 0.0100 13 160 500/D
1.5 7/0.53 0.6 1 0.6 1.2 11.5 0.0094 13 170 500/D
2.5 1/1.78 0.7 1.5 0.6 1.2 12.5 0.0092 18 220 500/D
2.5 7/0.67 0.7 1.5 0.6 1.2 13.5 0.0084 18 240 500/D
4 4 1/2.25 0.8 2.5 0.6 1.2 14.5 0.0086 25 320 500/D
4 7/0.85 0.8 2.5 0.6 1.2 15.5 0.0078 25 350 500/D
6 7/1.04 0.8 4 0.6 1.2 17.0 0.0066 33 470 500/D
10 7/1.35 0.9 4 0.6 1.4 20.5 0.0059 45 700 500/D
16 7/1.70 1.0 6 0.6 1.4 24.5 0.0053 60 1,000 500/D
25 7/2.14 1.2 6 0.6 1.8 30.0 0.0051 81 1,600 500/D
35 19/1.53 1.2 10 0.6 1.8 33.5 0.0043 99 2,000 500/D
: 0-2369-1818
CONDUCTOR
INSULATION
SHEATH
B
2
CABLE STRUCTURE
CONDUCTOR : Solid and stranded annealed copper,
Size 1 mm2 up to 35 mm2
INSULATION : PVC
Color : Light gray
SHEATH : PVC
Color : White
o
CLASSIFICATION : Maximum conductor temperature 70 C
Circuit voltage not exceeding 750 volts
TESTING VOLTAGE : 2,500 volts
REFERENCE : TIS 11-2531, Table 5
Number
of
Nominal
cross
Number
and
Insulation
thickness
Sheath
thickness
Max.
overall
Minimum
insulation
Maximum
continuous
Cable
weight
Standard
length
: 0-2369-1818
core sectional diameter diameter resistance at current (approx.)
o
area of wire 70 C rating in
free air
(mm2) (No./mm) (mm) (mm) (mm) (M- km) (Ampere) (kg/km) (m)
1 1/1.13 0.8 1.0 5.4 0.0141 15 35 500/D
1 7/0.43 0.8 1.0 5.6 0.0135 15 36 500/D
1.5 1/1.38 0.8 1.0 5.8 0.0123 20 41 500/D
1.5 7/0.53 0.8 1.0 6.0 0.0116 20 43 500/D
2.5 1/1.78 0.8 1.2 6.6 0.0102 27 55 500/D
2.5 7/0.67 0.8 1.2 7.0 0.0093 27 60 500/D
1 4 1/2.25 0.9 1.2 7.4 0.0094 36 80 500/D B
4 7/0.85 0.9 1.2 7.8 0.0085 36 80 500/D
6 7/1.04 0.9 1.4 8.8 0.0073 47 110 500/D 2
10 7/1.35 1.1 1.4 10.5 0.0069 66 170 500/D
16 7/1.70 1.1 1.5 11.5 0.0057 88 240 500/D
25 7/2.14 1.3 1.5 13.5 0.0054 118 360 500/D
35 19/1.53 1.3 1.6 15.0 0.0047 145 470 500/D
D : Packing in drum.
: 0-2369-1818
CONDUCTOR
INSULATION
SHEATH
B
2
CABLE STRUCTURE
NUMBER OF CORE : 2 cores
CONDUCTOR : Solid and stranded annealed copper,
Sizes 1 mm2 up to 35 mm2
INSULATION : PVC
Color : Light gray, Black
SHEATH : PVC
Color : White
o
CLASSIFICATION : Maximum conductor temperature 70 C
Circuit voltage not exceeding 750 volts
TESTING VOLTAGE : 2,500 volts
REFERENCE : TIS 11-2531, Table 5
TABLE 5
Number Nominal Number Insulation Sheath Approx. overall Minimum Maximum Cable Standard
of cross and thickness thickness diameter(mm) insulation continuous weight length
: 0-2369-1818
sectional diameter resistance current (approx.)
core area of wire at 70oC rating in
Lower Upper free air
(mm )
2
(No./mm) (mm) (mm) limit limit (M-km) (Ampere) (kg/km) (m)
1 1/1.13 0.8 1.4 5.2x8.0 6.4x9.4 0.0141 12 75 100/C
1 7/0.43 0.8 1.4 5.4x8.0 6.6x9.8 0.0135 12 75 100/C
1.5 1/1.38 0.8 1.4 5.6x8.4 6.6x10.0 0.0123 15 85 100/C
1.5 7/0.53 0.8 1.4 5.6x8.6 7.0x10.5 0.0116 15 95 100/C
2.5 1/1.78 0.8 1.4 5.8x9.2 7.2x11.0 0.0102 20 110 100/C
2.5 7/0.67 0.8 1.4 6.2x9.6 7.4x11.5 0.0093 20 120 100/C
2 4 1/2.25 0.9 1.4 6.6x10.5 7.8x12.5 0.0094 27 160 100/C
4 7/0.85 0.9 1.4 6.8x11.0 8.2x13.0 0.0085 27 170 100/C
6 7/1.04 0.9 1.4 7.4x12.0 8.8x14.5 0.0073 36 220 100/C
10 7/1.35 1.1 1.5 8.8x15.0 10.5x17.0 0.0069 50 340 100/C
B
16 7/1.70 1.1 1.5 9.8x17.0 11.5x19.5 0.0057 66 470 500/D
25 7/2.14 1.3 1.6 11.5x20.5 13.5x23.5 0.0054 89 700 500/D 2
35 19/1.53 1.3 1.7 13.0x23.0 15.0x26.5 0.0047 109 950 500/D
TISI permitted to increase the maximum overall diameter by 5%
C : Packing in coil.
D : Packing in drum.
750 V 70oC PVC INSULATED AND SHEATHED FLAT TYPE, WITH GROUND
: 0-2369-1818
GROUND WIRE
CONDUCTOR
INSULATION
SHEATH
B
2
CABLE STRUCTURE
NUMBER OF CORE : 2 cores with safety-ground
CONDUCTOR : Solid and stranded annealed copper,
Size 1 mm2 up to 35 mm2
GROUND WIRE : Ground conductor size 1 mm2 up 10 mm2
INSULATION : PVC
Color : Light gray and Black
Ground core - Green/Yellow
SHEATH : PVC
Color : White
o
CLASSIFICATION : Maximum conductor temperature 70 C
Circuit voltage not exceeding 750 volts
TESTING VOLTAGE : 2,500 volts
REFERENCE : TIS 11-2531, Table 13
Nominal Number Insulation Nominal
cross and thickness cross
Ground Sheath
insulation thickness
Approx. overall
diameter(mm)
Minimum Maximum Cable Standard
insulation continuous weight length
: 0-2369-1818
sectional diameter sectional thickness resistance current (approx.)
area of wire area of at 70oC rating in
ground Lower Upper free air
conductor limit limit
(mm2) (No./mm) (mm) (mm2) (mm) (mm) (M-km) (Ampere) (kg/km) (m)
1 1/1.13 0.8 1 0.6 1.4 5.2x10.0 6.4x12.0 0.0141 12 100 100/C
1 7/0.43 0.8 1 0.6 1.4 5.4x10.0 6.6x12.5 0.0135 12 110 100/C
1.5 1/1.38 0.8 1 0.6 1.4 5.6x10.5 6.6x12.5 0.0123 15 110 100/C
1.5 7/0.53 0.8 1 0.6 1.4 5.6x11.0 7.0x13.0 0.0116 15 120 100/C
2.5 1/1.78 0.8 1.5 0.6 1.4 5.8x11.5 7.2x14.0 0.0102 20 150 100/C
2.5 7/0.67 0.8 1.5 0.6 1.4 6.2X12.0 7.4X14.5 0.0093 20 160 100/C
4 1/2.25 0.9 2.5 0.6 1.4 6.6x13.0 7.8x15.5 0.0094 27 200 100/C
4 7/0.85 0.9 2.5 0.6 1.4 6.8x14.0 8.2x16.5 0.0085 27 220 100/C B
6 7/1.04 0.9 4 0.6 1.4 7.4x15.5 8.8x18.5 0.0073 36 290 100/C
10 7/1.35 1.1 4 0.6 1.5 8.8x18.5 10.5x21.5 0.0069 50 420 100/C 2
16 7/1.70 1.1 6 0.6 1.5 9.8x21.0 11.5x24.5 0.0057 66 600 500/D
25 7/2.14 1.3 6 0.6 1.6 11.5x24.5 13.5x28.0 0.0054 89 850 500/D
35 19/1.53 1.3 10 0.6 1.7 13.0x28.0 15.0x32.0 0.0047 109 1,100 500/D
: 0-2369-1818
CONDUCTOR
INSULATION
UNDER SHEATH
SHEATH
B
2 CABLE STRUCTURE
NUMBER OF CORE : Up to 4 cores
CONDUCTOR : Solid and stranded annealed copper,
Sizes 1 mm2 up to 500 mm2
Multi core 1 mm2 up to 300 mm2
INSULATION : PVC
Color : Single core - Black
2 cores - Light gray and Black
3 cores - Light gray, Black and Red
4 cores - Light gray, Black, Red and Blue
SHEATH AND UNDER SHEATH : PVC
Color : Black
o
CLASSIFICATION : Maximum conductor temperature 70 C
Circuit Voltage not exceeding 750 volts
TESTING VOLTAGE : 2,500 volts
REFERENCE : TIS 11-2531, Table 6 (Single core)
TIS 11-2531, Table 7 (Multi core)
Nominal Number
cross and
Insulation Sheath
thickness thickness
Max.
overall
Minimum
insulation
Maximum
continuous current
rating
Cable Standard
weight length
: 0-2369-1818
sectional diameter diameter resistance (approx.)
area of wire at 70oC (Armpere)
Free Under
(mm2) (No./mm) (mm) (mm) (mm) (M-km) air ground (kg/km) (m)
1 1/1.13 1.5 1.8 8.6 0.0207 17 22 80 100/C
1 7/0.43 1.5 1.8 8.8 0.0200 17 22 80 100/C
1.5 1/1.38 1.5 1.8 9.0 0.0184 21 27 85 100/C
1.5 7/0.53 1.5 1.8 9.2 0.0175 21 27 90 100/C
2.5 1/1.78 1.5 1.8 9.4 0.0157 28 36 100 100/C
2.5 7/0.67 1.5 1.8 9.8 0.0146 28 36 110 100/C
4 1/2.25 1.5 1.8 10.0 0.0135 38 47 120 100/C
4 7/0.85 1.5 1.8 10.5 0.0124 38 47 130 100/C
6 7/1.04 1.5 1.8 11.0 0.0107 49 60 160 100/C
10 7/1.35 1.5 1.8 12.0 0.0088 67 81 210 500/D
B
16 7/1.70 1.5 1.8 13.0 0.0074 89 105 280 500/D
25 7/2.14 1.5 1.8 14.5 0.0061 118 136 390 500/D 2
35 19/1.53 1.5 1.8 16.0 0.0053 146 165 490 500/D
50 19/1.78 1.5 1.8 17.0 0.0046 177 196 600 500/D
70 19/2.14 1.5 1.8 19.0 0.0039 222 241 850 500/D
95 19/2.52 1.7 1.8 21.5 0.0038 274 289 1,100 500/D
120 37/2.03 1.7 1.8 23.0 0.0034 318 330 1,400 500/D
150 37/2.25 1.9 2.0 26.0 0.0034 362 370 1,700 500/D
185 37/2.52 2.1 2.0 28.0 0.0034 416 419 2,100 500/D
240 61/2.25 2.3 2.2 31.5 0.0033 492 486 2,700 500/D
300 61/2.52 2.5 2.2 35.0 0.0032 565 551 3,400 500/D
400 61/2.85 2.7 2.2 38.5 0.0030 655 629 4,300 500/D
500 61/3.20 3.1 2.4 43.0 0.0031 757 717 5,400 500/D
TISI permitted to increase the maximum overall diameter by 5%
C : Packing in coil.
D : Packing in drum.
Number Nominal Number Insulation Under Sheath Max.
of cross
Minimum
and thickness Sheath thickness overall insulation
Maximum
continuous current weight
TABLE 7
Cable Standard
length
: 0-2369-1818
core sectional diameter
area
(mm2)
of wire
(No./mm) (mm)
thickness
(mm) (mm)
diameter resistance
(mm)
at 70oC
(M-km)
Free
air
rating
(Ampere)
Under
ground
(approx.)
(kg/km) (m)
1 1/1.13 0.8 0.8 1.8 12.0 0.0141 15 21 160 100/C
1 7/0.43 0.8 0.8 1.8 12.5 0.0135 15 21 160 100/C
1.5 1/1.38 0.8 0.8 1.8 12.5 0.0123 19 27 170 100/C
1.5 7/0.53 0.8 0.8 1.8 13.0 0.0116 19 27 190 100/C
2.5 1/1.78 0.8 0.8 1.8 13.5 0.0102 25 35 210 100/C
2.5 7/0.67 0.8 0.8 1.8 14.0 0.0093 25 35 230 100/C
4 1/2.25 0.9 0.8 1.8 15.0 0.0094 33 47 270 100/C
4 7/0.85 0.9 0.8 1.8 15.5 0.0085 33 47 290 100/C
6 7/1.04 0.9 0.8 1.8 17.0 0.0073 43 60 360 100/C
2 10 7/1.35 1.1 0.8 1.8 19.5 0.0069 60 81 550 500/D
B 16
25
7/1.70
7/2.14
1.1
1.3
0.8
1.2
2.0
2.0
22.5
27.0
0.0057
0.0054
80
106
105
136
700
1,100
500/D
500/D
35 19/1.53 1.3 1.2 2.0 29.5 0.0047 130 165 1,400 500/D
2 50
70
19/1.78
19/2.14
1.5
1.5
1.2
1.5
2.2
2.2
33.5
38.0
0.0046
0.0039
157
195
196
240
1,800
2,400
500/D
500/D
95 19/2.52 1.7 1.5 2.2 42.5 0.0038 239 290 3,200 500/D
120 37/2.03 1.7 1.5 2.4 46.5 0.0034 280 332 3,900 500/D
150 37/2.25 1.9 1.8 2.6 52.0 0.0034 320 370 4,800 500/D
185 37/2.52 2.1 1.8 2.8 57.0 0.0034 370 419 6,000 500/D
240 61/2.25 2.3 2.0 64.0 64.0 0.0033 440 484 7,500 500/D
300 61/2.25 2.5 2.0 3.2 70.5 0.0032 507 547 9,500 500/D
1 1/1.13 0.8 0.8 1.8 12.5 0.0414 12 18 180 100/C
1 7/0.43 0.8 0.8 1.8 13.0 0.0135 12 18 180 100/C
1.5 1/1.38 0.8 0.8 1.8 13.0 0.0123 16 22 200 100/C
1.5 7/0.53 0.8 0.8 1.8 13.5 0.0116 16 22 210 100/C
2.5 1/1.78 0.8 0.8 1.8 14.0 0.0102 21 30 240 100/C
2.5 7/0.67 0.8 0.8 1.8 15.0 0.0093 21 30 260 100/C
4 1/2.25 0.9 0.8 1.8 15.5 0.0094 28 39 320 100/C
4 7/0.85 0.9 0.8 1.8 16.5 0.0085 28 39 350 100/C
6 7/1.04 0.9 0.8 1.8 18.0 0.0073 37 50 440 100/C
3 10 7/1.35 1.1 0.8 1.8 20.5 0.0069 50 68 650 500/D
16 7/1.70 1.1 1.2 2.0 24.5 0.0057 67 87 950 500/D
25 7/2.14 1.3 1.2 2.0 28.5 0.0054 89 113 1,400 500/D
35 19/1.53 1.3 1.2 2.0 31.5 0.0047 109 137 1,700 500/D
50 19/1.78 1.5 1.5 2.2 36.0 0.0046 131 162 2,300 500/D
70 19/2.14 1.5 1.5 2.2 40.5 0.0039 163 200 3,100 500/D
95 19/2.52 1.7 1.5 2.4 46.0 0.0038 202 240 4,200 500/D
120 37/2.03 1.7 1.8 2.6 50.5 0.0034 235 273 5,000 500/D
150 37/2.25 1.9 1.8 2.8 56.0 0.0034 269 306 6,500 500/D
185 37/2.52 2.1 2.0 3.0 61.5 0.0034 311 346 8,000 500/D
240 61/2.25 2.3 2.0 3.2 69.0 0.0033 371 402 10,000 500/D
300 61/2.52 2.5 2.2 3.4 76.0 0.0032 427 453 12,500 500/D
Number Nominal Number Insulation Under Sheath Max.
of cross
Minimum
and thickness sheath thickness overall insulation
Maximum
continuous current weight
TABLE 7
Cable Standard
length
: 0-2369-1818
core sectional diameter
area
(mm2)
of wire
(No./mm)
thickness
(mm) (mm)
diameter resistance
(mm)
at 70oC
(mm) (M-km)
Free
air
rating
(Ampere)
Under
ground
(approx.)
(kg/km) (m)
1 1/1.13 0.8 0.8 1.8 13.5 0.0141 11 16 200 100/C
1 7/0.43 0.8 0.8 1.8 14.0 0.0135 11 16 210 100/C
1.5 1/1.38 0.8 0.8 1.8 14.0 0.0123 14 20 230 100/C
1.5 7/0.53 0.8 0.8 1.8 14.5 0.0116 14 20 240 100/C
2.5 1/1.78 0.8 0.8 1.8 15.0 0.0102 19 27 290 100/C
2.5 7/0.67 0.8 0.8 1.8 16.0 0.0093 19 27 310 100/C
4 1/2.25 0.9 0.8 1.8 17.0 0.0094 25 35 390 100/C
4 7/0.85 0.9 0.8 1.8 17.5 0.0085 25 35 410 100/C
4 6 7/1.04 0.9 0.8 1.8 19.0 0.0073 33 45 550 500/D
10 7/1.35 1.1 0.8 2.0 23.0 0.0069 45 60 800 500/D
16
25
7/1.70
7/2.14
1.1
1.3
1.2
1.2
2.0
2.0
26.5
31.0
0.0057
0.0054
60
79
77
100
1,100
1,700
500/D
500/D
B
35 19/1.53 1.3 1.5 2.2 35.0 0.0047 97 120 2,200 500/D
50
70
19/1.78
19/2.14
1.5
1.5
1.5
1.5
2.2
2.4
39.5
44.5
0.0046
0.0039
117
147
144
176
2,900
4,000
500/D
500/D
2
95 19/2.52 1.7 1.8 2.6 57.5 0.0038 182 211 5,500 500/D
120 37/2.03 1.7 1.8 2.8 56.0 0.0034 213 241 6,500 500/D
150 37/2.25 1.9 2.0 3.0 62.0 0.0034 243 270 8,000 500/D
185 37/2.52 2.1 2.0 3.2 68.0 0.0034 282 306 10,000 500/D
240 61/2.25 2.3 2.2 3.4 76.5 0.0033 335 354 13,000 500/D
300 61/2.52 2.5 2.2 3.8 85.0 0.0032 385 399 16,000 500/D
: 0-2369-1818
NEUTRAL CORE
CONDUCTOR
INSULATION
B
2 CABLE STRUCTURE
NUMBER OF CORE : 3 phase core with 1 neutral core
CONDUCTOR : Stranded annealed copper,
Sizes : Phase conductor size. 6 mm2 up to 300 mm2
Neutral conductor size. 4 mm2 up to 150 mm2
INSULATION : PVC
Color :3 cores - Black, Red and Blue
1 Neutral core - Light gray
Nominal
cross
Number
and diameter
Insulation
thickness
Under Sheath Max. Minimum Maximum
sheath thickness overall insulation continuous current
TABLE 8
Cable Standard
weight length
: 0-2369-1818
sectional2 area
(mm )
of wire
(No./mm) (mm)
thickness
(kg/km) (m)
3x6 1x4 7/1.04 7/0.85 0.9 0.9 0.8 1.8 19.0 0.0073 37 51 500 500/D
3x10 1x6 7/1.35 7/1.04 1.1 0.9 0.8 2.0 23.0 0.0069 51 68 750 500/D
3x16 1x10 7/1.70 7/1.35 1.1 1.1 1.2 2.0 26.5 0.0057 68 88 1,100 500/D
3x25 1x16 7/2.14 7/1.70 1.3 1.1 1.2 2.0 31.0 0.0054 90 114 1,600 500/D
3x35 1x16 19/1.53 7/1.70 1.3 1.1 1.5 2.2 35.0 0.0047 109 137 2,000 500/D
3x50 1x25 19/1.78 7/2.14 1.5 1.3 1.5 2.2 39.5 0.0046 133 163 2,600 500/D
3x70 1x35 19/2.14 19/1.53 1.5 1.3 1.5 2.4 44.5 0.0039 166 201 3,500 500/D
3x95 1x50 19/2.52 19/1.78 1.7 1.5 1.8 2.6 51.5 0.0038 205 240 4,800 500/D
3x120 1x70 37/2.03 19/2.14 1.7 1.5 1.8 2.8 56.0 0.0034 240 275 6,000 500/D
3x150 1x70 37/2.25 19/2.14 1.9 1.5 2.0 3.0 62.0 0.0034 272 306 7,000 300/D B
3x185 1x95 37/2.52 19/2.52 2.1 1.7 2.0 3.2 68.0 0.0034 316 347 9,000 300/D
3x240 1x120 61/2.25 37/2.03 2.3 1.7 2.2 3.4 76.5 0.0033 375 402 11,500 200/D
3x300 1x150 61/2.52 37/2.25 2.5 1.9 2.2 3.8 84.5 0.0032 430 453 14,000 200/D 2
TISI permitted to increase the maximum overall diameter by 5%
*REMARK : Special protection can be produced.
D : Packing in drum.
: 0-2369-1818
GROUND CORE
CONDUCTOR
INSULATION
2
CABLE STRUCTURE
NUMBER OF CORE : 2 up to 4 cores with safety ground
CONDUCTOR : Solid and stranded annealed copper,
Sizes 1 mm2 up to 300 mm2
Ground conductor size 1 mm2 up to 35 mm2
INSULATION : PVC
Color : 2 cores - Light gray and Black
3 cores - Light gray, Black and Red
4 cores - Light gray, Black, Red and Blue
Ground core - Green/Yellow
SHEATH AND UNDER SHEATH : PVC
Color : Black
o
CLASSIFICATION : Maximum conductor temperature 70 C
Circuit voltage not exceeding 750 volts
TESTING VOLTAGE : 2,500 volts
REFERENCE : TIS 11-2531, Table 14
Number Nominal Number Insulation Nominal Ground Under Sheath
of cross and thickness cross insulation sheath thickness
Max. Minimum Maximum
TABLE 14
Cable Standard
overall insulation continuous current weight length
: 0-2369-1818
core sectional diameter
area of wire
(mm) (M-km)
Free
air
rating
(Ampere)
Under
(approx.)
Number Nominal Number Insulation Nominal Ground Under Sheath
of cross and thickness cross insulation sheath thickness
Max. Minimum Maximum
TABLE 14
Cable Standard
overall insulation continuous current weight length
: 0-2369-1818
core sectional diameter
area of wire
(mm) (M-km)
Free
air
rating
(Ampere)
Under
(approx.)
750 V 70oC PVC INSULATED AND DOUBLE SHEATHED POWER CABLE, WITH GALVANIZED
STEEL WIRES ARMOR
CONDUCTOR
ARMOR SHEATH B
2
CABLE STRUCTURE
NUMBER OF CORE : 2 up to 4 cores
CONDUCTOR : Solid and stranded annealed copper,
Sizes 1 mm2 up to 300 mm2
INSULATION : PVC
Color : 2 cores - Light gray and Black
3 cores - Light gray, Black and Red
4 cores - Light gray, Black, Red and Blue
UNDER SHEATH : PVC, Color : Black
SHEATH : PVC, Color : Black
ARMOUR : Galvanized Steel Wires
o
CLASSIFICATION : Maximum conductor temperature 70 C
Circuit voltage not exceeding 750 volts
TESTING VOLTAGE : 2,500 volts
REFERENCE : TIS 11-2531
THAI-YAZAKI STANDARD
Number Nominal Number Insulation Under Diameter Sheath Approx. Maximum Minimum Maximum Cable Standard
of cross and thickness sheath of steel thickness overall conductor insulation continuous weight
core sectional diameter thickness wire diameter resistance resistance current (approx.)
length
: 0-2369-1818
area of wire
(mm2) (No./mm) (mm) (mm)
armor
(mm) (mm) (mm)
at 20oC at 70oC rating in
underground
(-km) (M-km) (Ampere) (kg/km) (m)
1 1/1.13 0.8 0.8 0.8 1.8 13.5 18.1 0.0141 22 300 500/D
1 7/0.43 0.8 0.8 0.8 1.8 14.0 18.1 0.0135 22 310 500/D
1.5 7/1.38 0.8 0.8 0.8 1.8 14.0 12.1 0.0123 27 320 500/D
1.5 7/0.53 0.8 0.8 0.8 1.8 14.5 12.1 0.0116 27 340 500/D
2.5 1/1.78 0.8 0.8 0.8 1.8 15.0 7.41 0.0102 36 370 500/D
2.5 7/0.67 0.8 0.8 0.8 1.8 15.5 7.41 0.0093 36 400 500/D
4 1/2.25 0.9 0.8 0.8 1.8 16.5 4.61 0.0094 47 460 500/D
4 7/0.85 0.9 0.8 1.25 1.8 18.0 4.61 0.0085 47 600 500/D
B 6 7/1.04 0.9 0.8 1.25 1.8 19.0 3.08 0.0073 61 700 500/D
10 7/1.35 1.1 0.8 1.25 1.8 22.0 1.83 0.0069 82 950 500/D
2 16 7/1.70 1.1 0.8 1.6 1.8 24.0 1.15 0.0057 107 1,300 500/D
2 25 7/2.14 1.3 1.2 2.0 1.9 30.0 0.727 0.0054 138 2,000 500/D
35 19/1.53 1.3 1.2 2.0 2.0 33.0 0.524 0.0047 168 2,400 500/D
50 19/1.78 1.5 1.2 2.0 2.1 36.0 0.387 0.0046 199 3,000 500/D
70 19/2.14 1.5 1.5 2.0 2.2 41.0 0.268 0.0039 243 4,000 500/D
95 19/2.52 1.7 1.5 2.5 2.4 47.0 0.193 0.0038 294 5,000 500/D
120 37/2.03 1.7 1.5 2.5 2.6 51.0 0.153 0.0034 336 6,000 500/D
150 37/2.25 1.9 1.8 2.5 2.7 56.0 0.124 0.0034 375 7,000 500/D
185 37/2.52 2.1 1.8 2.5 2.9 61.0 0.0991 0.0034 424 8,500 300/D
240 61/2.25 2.3 2.0 2.5 3.1 68.0 0.0754 0.0033 489 10,500 300/D
300 61/2.52 2.5 2.0 3.15 3.4 76.0 0.0601 0.0032 553 13,500 200/D
: 0-2369-1818
area
(mm2)
of wire
(No./mm) (mm) (mm)
armor
(mm) (mm) (mm)
at 20oC at 70oC rating in
underground
(-km) (M-km) (Ampere) (kg/km) (m)
1 1/1.13 0.8 0.8 0.8 1.8 14.0 18.1 0.0141 18 330 500/D
1 7/0.43 0.8 0.8 0.8 1.8 14.5 18.1 0.0135 18 340 500/D
1.5 1/1.38 0.8 0.8 0.8 1.8 14.5 12.1 0.0123 23 350 500/D
1.5 7/0.53 0.8 0.8 0.8 1.8 15.0 12.1 0.0116 23 380 500/D
2.5 1/1.78 0.8 0.8 0.8 1.8 15.5 7.41 0.0102 30 420 500/D
2.5 7/0.67 0.8 0.8 0.8 1.8 16.5 7.41 0.0093 30 450 500/D
4 1/2.25 0.9 0.8 1.25 1.8 18.0 4.61 0.0094 40 650 500/D
4 7/0.85 0.9 0.8 1.25 1.8 18.5 4.61 0.0085 40 700 500/D
6 7/1.04 0.9 0.8 1.25 1.8 20.0 3.08 0.0073 51 800 500/D B
10 7/1.35 1.1 0.8 1.6 1.8 23.0 1.83 0.0069 69 1,200 500/D
3 16 7/1.70 1.1 1.2 1.6 1.8 26.0 1.15 0.0057 88 1,600 500/D
25 7/2.14 1.3 1.2 2.0 1.9 31.0 0.727 0.0054 115 2,300 500/D 2
35 19/1.53 1.3 1.2 2.0 2.0 34.0 0.524 0.0047 140 2,800 500/D
50 19/1.78 1.5 1.5 2.0 2.2 39.0 0.387 0.0046 164 3,600 500/D
70 19/2.14 1.5 1.5 2.0 2.3 43.0 0.268 0.0039 202 4,600 500/D
95 19/2.52 1.7 1.5 2.5 2.5 50.0 0.193 0.0038 244 6,500 500/D
120 37/2.03 1.7 1.8 2.5 2.7 55.0 0.153 0.0034 277 7,500 300/D
150 37/2.25 1.9 1.8 2.5 2.8 59.0 0.124 0.0034 310 9,000 300/D
185 37/2.52 2.1 2.0 2.5 3.0 65.0 0.0991 0.0034 350 10,500 300/D
240 61/2.25 2.3 2.0 2.5 3.3 73.0 0.0754 0.0033 406 13,000 200/D
300 61/2.52 2.5 2.2 3.15 3.5 81.0 0.0601 0.0032 457 17,000 200/D
: 0-2369-1818
area
(mm2)
of wire
(No./mm) (mm) (mm)
armor
(mm) (mm)
at 20oC
(mm)
at 70oC rating in
underground
(-km) (M-km) (Ampere) (kg/km) (m)
1 1/1.13 0.8 0.8 0.8 1.8 15.0 18.1 0.0141 16 360 500/D
1 7/0.43 0.8 0.8 0.8 1.8 15.0 18.1 0.0135 16 380 500/D
1.5 1/1.38 0.8 0.8 0.8 1.8 15.5 12.1 0.0123 20 400 500/D
1.5 7/0.53 0.8 0.8 0.8 1.8 16.0 12.1 0.0116 20 420 500/D
2.5 1/1.78 0.8 0.8 0.8 1.8 16.5 7.41 0.0102 27 480 500/D
2.5 7/0.67 0.8 0.8 0.8 1.8 18.0 7.41 0.0093 27 650 500/D
4 1/2.25 0.9 0.8 1.25 1.8 19.0 4.61 0.0094 36 750 500/D
4 7/0.85 0.9 0.8 1.25 1.8 20.0 4.61 0.0085 36 800 500/D
B 6 7/1.04 0.9 0.8 1.25 1.8 21.0 3.08 0.0073 45 950 500/D
10 7/1.35 1.1 0.8 1.25 1.8 25.0 1.83 0.0069 61 1,400 500/D
4 16 7/1.70 1.1 1.2 1.6 1.8 28.0 0.15 0.0057 78 1,800 500/D
2 25 7/2.14 1.3 1.2 1.6 2.0 34.0 0.727 0.0054 102 2,800 500/D
35 19/1.53 1.3 1.5 2.0 2.1 38.0 0.524 0.0047 122 3,500 500/D
50 19/1.78 1.5 1.5 2.0 2.3 43.0 0.387 0.0046 145 4,300 500/D
70 19/2.14 1.5 1.5 2.0 2.5 49.0 0.268 0.0039 179 6,000 500/D
95 19/2.52 1.7 1.8 2.5 2.7 55.0 0.193 0.0038 214 8,000 300/D
120 37/2.03 1.7 1.8 2.5 2.9 60.0 0.153 0.0034 244 9,000 300/D
150 37/2.25 1.9 2.0 2.5 3.0 65.0 0.124 0.0034 273 11,000 300/D
185 37/2.52 2.1 2.0 2.5 3.2 72.0 0.0991 0.0034 309 13,000 200/D
240 61/2.25 2.3 2.2 3.15 3.5 81.0 0.0754 0.0033 358 17,500 150/D
300 61/2.52 2.5 2.2 3.15 3.8 89.0 0.0601 0.0032 403 21,000 150/D
750 V 70oC PVC INSULATED AND DOUBLE SHEATHED POWER CABLE, WITH
CONCENTRIC CONDUCTORS
: 0-2369-1818
UNDER SHEATH
INSULATION
BINDING TAPE
THAI-YAZAKI STANDARD
Nominal Number Insulation Under Sheath Approx. Maximum Minimum Maximum Cable Standard
cross and diameter
thickness sheath thickness overall conductor insulation continuous weight length
sectional2 area of wire thickness diameter resistance resistance current (approx.)
: 0-2369-1818
(mm ) (No./mm)
Phase Concentric Phase Concentric (mm) (mm) (mm)
at 20oC at 70oC rating in
free air
(mm) (-km) (M-km) (Ampere) (kg/km) (m)
3x25 16 7/2.14 19/1.04 1.3 1.2 2.0 30 0.727 0.0054 88 1,600 500/D
3x35 16 19/1.53 19/1.04 1.3 1.2 2.0 33 0.524 0.0047 107 1,900 500/D
3x50 25 19/1.78 25/1.13 1.5 1.5 2.2 38 0.387 0.0046 130 2,600 500/D
3x70 35 19/2.14 23/1.38 1.5 1.5 2.2 43 0.268 0.0039 162 3,500 500/D
3x95 50 19/2.52 27/1.53 1.7 1.5 2.4 48 0.193 0.0038 201 4,700 500/D
3x120 70 37/2.03 31/1.70 1.7 1.8 2.6 53 0.153 0.0034 233 6,000 500/D
3x150 70 37/2.25 31/1.70 1.9 1.8 2.8 58 0.124 0.0034 266 7,000 300/D
3x185 95 37/2.52 36/1.83 2.1 2.0 3.0 64 0.0991 0.0034 306 9,000 300/D
B 3x240 120 61/2.25 37/2.03 2.3 2.0 3.2 72 0.0601 0.0033 364 11,500 200/D
3x300 150 61/2.52 41/2.14 2.5 2.2 3.4 79 0.0601 0.0032 417 14,000 200/D
2 D : Packing in drum.
Nominal Number Insulation Under Sheath Approx. Maximum Minimum Maximum Cable Standard
cross and diameter
thickness sheath thickness overall conductor insulation continuous weight length
sectional2 area of wire thickness diameter resistance resistance current (approx.)
(mm ) (No./mm) at 20oC at 70oC rating in
free air
Phase Concentric Phase Concentric (mm) (mm) (mm) (mm) (-km) (M-km) (Ampere) (kg/km) (m)
3x16 16 7/1.70 19/1.04 1.1 1.2 2.0 26 1.15 0.0057 66 1,100 500/D
3x25 25 7/2.14 25/1.13 1.3 1.2 2.0 30 0.727 0.0054 88 1,600 500/D
3x35 25 19/1.53 25/1.13 1.3 1.2 2.0 33 0.524 0.0047 107 2,000 500/D
3x50 35 19/1.78 23/1.38 1.5 1.5 2.2 39 0.387 0.0046 129 2,700 500/D
3x70 50 19/2.14 27/1.53 1.5 1.5 2.2 43 0.268 0.0039 162 3,600 500/D
3x95 70 19/2.52 31/1.70 1.7 1.5 2.4 49 0.193 0.0038 200 5,000 500/D
3x120 95 37/2.03 36/1.83 1.7 1.8 2.6 54 0.153 0.0034 233 6,000 500/D
3x150 95 37/2.25 36/1.83 1.9 1.8 2.8 58 0.124 0.0034 266 7,500 300/D
3x150 120 37/2.25 37/2.03 1.9 1.8 2.8 59 0.124 0.0034 266 7,500 300/D
3x185 120 37/2.52 37/2.03 2.1 2.0 3.0 65 0.0991 0.0034 306 9,000 300/D
D : Packing in drum.
CONDUCTOR COVERING TAPE
INSULATION
: 0-2369-1818
CONDUCTOR BINDING TAPE
SHEATH
INSULATION
CONDUCTOR
FILLERS
B
SHEATH
CIRCUIT IDENTIFICATION TAPE
CIRCUIT IDENTIFICATION TAPE
2
CABLE STRUCTURE
NUMBER OF CORE : Up to 4 cores
CONDUCTOR : Concentric stranded and compacted round
stranded annealed copper,
Sizes 1.5 mm2 up to 1,000 mm2
INSULATION : Cross-linked polyethylene
Color : Natural (Translucent)
Core identification : Compound color or color tape
Black, White, Red, Green
SHEATH : PVC
: Color : Black
o
CLASSIFICATION : Maximum conductor temperature 90 C
Circuit voltage not exceeding 1,200 volts
TESTING VOLTAGE : 3,500 volts
REFERENCE : IEC 60502-1
IEC 60502-1
Number Nominal Minimum Insulation Sheath Approx. Maximum Minimum Maximum Cable Standard
of cross number thickness thickness overall conductor insulation continuous weight length
core sectional of diameter resistance resistance current (approx.)
: 0-2369-1818
area
(mm2)
stranded
(No./mm) (mm) (mm) (mm)
at 20oC
(-km)
at 20oC rating in
free air
(M-km) (Ampere) (kg/km) (m)
1.5 7/0.53 0.7 1.4 6.3 12.1 2,500 27 50 500/D
2.5 7/0.67 0.7 1.4 6.8 7.41 2,100 36 60 500/D
4 7/0.85 0.7 1.4 7.3 4.61 1,700 48 80 500/D
6 7/1.04 0.7 1.4 7.9 3.08 1,450 61 100 500/D
10 6 0.7 1.4 8.4 1.83 1,250 82 140 500/D
16 6 0.7 1.4 9.4 1.15 1,000 110 200 500/D
25 6 0.9 1.4 11.0 0.727 1,050 145 300 500/D
35 6 0.9 1.4 12.0 0.524 900 180 400 500/D
50 6 1.0 1.4 13.5 0.387 850 220 500 500/D
1 70 12 1.1 1.4 15.0 0.268 800 280 750 500/D
B 95 15 1.1 1.5 17.5 0.193 650 345 1,000 500/D
120 18 1.2 1.5 19.0 0.153 650 400 1,200 500/D
150 18 1.4 1.6 21 0.124 700 460 1,500 500/D
2 185
240
30
34
1.6
1.7
1.6
1.7
23
26
0.0991
0.0754
700
650
530
630
1,900
2,500
500/D
500/D
300 34 1.8 1.8 29 0.0601 600 725 3,100 500/D
400 53 2.0 1.9 32 0.0470 600 840 3,900 500/D
500 53 2.2 2.0 36 0.0366 600 975 5,000 500/D
630 53 2.4 2.2 40 0.0283 550 1,125 6,500 500/D
800 53 2.6 2.3 45 0.0221 550 1,320 8,500 300/D
1,000 53 2.8 2.4 51 0.0176 500 1,510 10,500 300/D
IEC 60502-1
Number Nominal Minimum Insulation Sheath Approx. Maximum Minimum Maximum Cable Standard
of cross number thickness thickness overall conductor insulation continuous weight length
core sectional of diameter resistance resistance current (approx.)
: 0-2369-1818
area
(mm2)
stranded
(No./mm) (mm) (mm) (mm)
at 20oC
(-km)
at 20oC rating in
free air
(M-km) (Ampere) (kg/km) (m)
1.5 7/0.53 0.7 1.8 11.5 12.1 2,500 21 150 500/D
2.5 7/0.67 0.7 1.8 12.5 7.41 2,100 28 190 500/D
4 7/0.85 0.7 1.8 13.5 4.61 1,700 37 240 500/D
6 7/1.04 0.7 1.8 15.0 3.08 1,450 48 320 500/D
10 6 0.7 1.8 16.0 1.83 1,250 64 440 500/D
16 6 0.7 1.8 18.0 1.15 1,000 86 650 500/D
25 6 0.9 1.8 22 0.727 1,050 115 950 500/D
35 6 0.9 1.8 24 0.524 900 140 1,300 500/D
3 50 6 1.0 1.8 27 0.387 850 170 1,600 500/D
70 12 1.1 1.9 31 0.268 800 215 2,300 500/D
95 15 1.1 2.0 36 0.193 650 260 3,100 500/D B
120 18 1.2 2.1 39 0.153 650 305 4,000 500/D
150 18 1.4 2.3 44 0.124 700 350 4,900 500/D
185
240
30
34
1.6
1.7
2.4
2.6
49
55
0.0991
0.0754
700
650
405
490
6,000
8,000
500/D
300/D
2
300 34 1.8 2.8 61 0.0601 600 565 10,000 300/D
400 53 2.0 3.1 68 0.0470 600 655 12,500 200/D
D : Packing in drum
0.6/1kV Cross linked Polyethlene Insulated PVC Sheath Steel Wire Armored Power Cable
: 0-2369-1818
CONDUCTOR
INNER SHEATH
BINDING TAPE
STEEL WIRE ARMOR
SEPARATOR TAPE
FILLERS
INSULATION
B CIRCUIT INDENTIFICATION TAPE
SHEATH
2
CABLE STRUCTURE
NUMBER OF CORE : 2 up to 4 cores
CONDUCTOR : Concentric stranded and compact
stranded annealed copper
Sizes 1.5 mm2 up to 400 mm2
INSULATION : Cross-linked polyethylene
Color :Natural (Translucent)
CORE IDENTIFICATION : Compound color or color tape
Color :Black, White, Red and Green
ARMORED : Steel wire armored
INNER AND OUTTER SHEATH : PVC
Color :Black
o
CLASSIFICATION : Maximum conductor temperature 90 C
Circuit voltage not exceeding 1,200 volts
TESTING VOLTAGE : 3,500 volts
REFERENCE : IEC 60502-1
of cross of diameter thickness thickness of
IEC 60502-1
Number Nominal Number Conductor Insulation Jacket Diameter Armor Overall Overall Maximum Cable Standard
wire jacket diameter conductor weight length
: 0-2369-1818
core sectional stranded approx. nominal nominal jacket diameter thickness approx. resistance
area
(-km)
(approx.)
(kg/km) (m)
1.5 7/0.53 1.59 0.7 1.2 9.7 0.80 1.8 15.0 12.1 360 500/D
2.5 7/0.67 2.01 0.7 1.2 10.5 0.80 1.8 16.5 7.41 400 500/D
4 7/0.85 2.55 0.7 1.2 11.5 1.25 1.8 18.0 4.61 600 500/D
6 7/1.04 3.12 0.7 1.2 12.5 1.25 1.8 19.5 3.08 700 500/D
10 6 3.8 0.7 1.2 14.0 1.25 1.8 20 1.83 800 500/D
16 6 4.8 0.7 1.2 16.0 1.25 1.8 23 1.15 1,000 500/D
25 6 6.0 0.9 1.2 19.0 1.60 1.8 26 0.727 1,500 500/D
2 35 6 7.1 0.9 1.2 22 2.0 1.8 30 0.524 2,000 500/D
50 6 8.3 1.0 1.2 24 2.0 1.9 33 0.387 2,400 500/D
70 12 9.9 1.1 1.2 28 2.0 2.0 36 0.268 3,100 500/D B
95 15 11.7 1.1 1.2 32 2.0 2.1 40 0.193 3,800 500/D
120 18 13.2 1.2 1.2 35 2.0 2.3 44 0.153 4,600 500/D
150 18 14.6 1.4 1.3 39 2.0 2.4 48 0.124 5,500 500/D 2
185 30 16.3 1.6 1.3 43 2.5 2.6 54 0.991 7,000 500/D
240 34 18.7 1.7 1.4 49 2.5 2.7 60 0.0754 8,500 500/D
300 34 20.9 1.8 1.5 54 2.5 2.9 66 0.0601 10,000 300/D
400 53 23.5 2.0 1.7 61 2.5 3.2 73 0.0470 12,500 300/D
1.5 7/0.53 1.59 0.7 1.2 10.0 0.80 1.8 16.0 12.1 400 500/D
2.5 7/0.67 2.01 0.7 1.2 11.0 1.25 1.8 18.0 7.41 550 500/D
4 7/0.85 2.55 0.7 1.2 12.0 1.25 1.8 19.0 4.61 650 500/D
6 7/1.04 3.12 0.7 1.2 13.5 1.25 1.8 20 3.08 800 500/D
10 6 3.8 0.7 1.2 14.5 1.25 1.8 21 1.83 950 500/D
16 6 4.8 0.7 1.2 17.0 1.60 1.8 24 1.15 1,300 500/D
3 25 6 6.0 0.9 1.2 21 1.60 1.8 28 0.727 1,800 500/D
35 6 7.1 0.9 1.2 23 2.0 1.8 31 0.524 2,400 500/D
50 6 8.3 1.0 1.2 26 2.0 2.0 34 0.387 3,000 500/D
70 12 9.9 1.1 1.2 30 2.0 2.1 39 0.268 3,800 500/D
95 15 11.7 1.1 1.2 34 2.0 2.2 43 0.193 4,800 500/D
120 18 13.2 1.2 1.2 38 2.0 2.3 47 0.153 6,000 500/D
150 18 14.6 1.4 1.3 42 2.5 2.5 52 0.124 7,500 500/D
185 30 16.3 1.6 1.4 47 2.5 2.7 58 0.0991 9,000 500/D
240 34 18.7 1.7 1.5 53 2.5 2.9 64 0.0754 11,000 300/D
300 34 20.9 1.8 1.6 58 2.5 3.0 70 0.0601 13,500 300/D
400 53 23.5 2.0 1.8 65 3.15 3.4 80 0.0470 17,500 300/D
of of diameter thickness thickness of
IEC 60502-1
Number Nominal Number Conductor Insulation Jacket Diameter Armor Overall Overall Maximum Cable Standard
cross wire jacket diameter conductor weight length
: 0-2369-1818
core sectional stranded approx. nominal nominal jacket diameter thickness approx. resistance
area
(-km)
(approx.)
(kg/km) (m)
1.5 7/0.53 1.59 0.7 1.2 11.0 1.25 1.8 17.5 12.1 550 500/D
2.5 7/0.67 2.01 0.7 1.2 12.0 1.25 1.8 19.0 7.41 650 500/D
4 7/0.85 2.55 0.7 1.2 13.5 1.25 1.8 20 4.61 750 500/D
6 7/1.04 3.12 0.7 1.2 15.0 1.25 1.8 21 3.08 900 500/D
10 6 3.8 0.7 1.2 16.0 1.25 1.8 23 1.83 1,100 500/D
16 6 4.8 0.7 1.2 18.5 1.60 1.8 26 1.15 1,600 500/D
25 6 6.0 0.9 1.2 23 2.0 1.8 31 0.727 2,300 500/D
35 6 7.1 0.9 1.2 25 2.0 1.9 34 0.524 2,900 500/D
4 50 6 8.3 1.0 1.2 29 2.0 2.1 37 0.387 3,600 500/D
B 70 12 9.9 1.1 1.2 33 2.0 2.2 42 0.268 4,700 500/D
95 15 11.7 1.1 1.2 38 2.0 2.3 47 0.193 6,000 500/D
120 18 13.2 1.2 1.3 42 2.5 2.5 53 0.153 7,500 500/D
2 150 18 14.6 1.4 1.4 46 2.5 2.7 58 0.124 9,000 500/D
185 30 16.3 1.6 1.5 52 2.5 2.8 64 0.0991 11,000 300/D
240 34 18.7 1.7 1.6 59 2.5 3.1 71 0.0754 14,000 300/D
300 34 20.9 1.8 1.7 65 2.5 3.3 78 0.0601 17,000 200/D
400 53 23.5 2.0 1.9 73 3.15 3.6 87 0.0470 22,000 200/D
D : Packing in drum
: 0-2369-1818
1.8/3 kV 90 C CROSS - LINKED POLYETHYLENE INSULATED AND B 44
PVC SHEATHED POWER CABLE. (IEC 60502-1 STANDARD)
3.6/6 kV 90 C CROSS - LINKED POLYETHYLENE INSULATED AND B 46
PVC SHEATHED POWER CABLE. (IEC 60502-2 STANDARD)
6/10 kV 90 C CROSS - LINKED POLYETHYLENE INSULATED AND B 48
PVC SHEATHED POWER CABLE. (IEC 60502-2 STANDARD)
8.7/15 kV 90 C CROSS - LINKED POLYETHYLENE INSULATED AND B 50
B
PVC SHEATHED POWER CABLE. (IEC 60502-2 STANDARD)
3
12/20 kV 90 C CROSS - LINKED POLYETHYLENE INSULATED AND B 52
PVC SHEATHED POWER CABLE. (IEC 60502-2 STANDARD)
18/30 kV 90 C CROSS - LINKED POLYETHYLENE INSULATED AND B 54
PVC SHEATHED POWER CABLE. (IEC 60502-2 STANDARD)
CABLE
INSULATION
COPPER SHIELD TAPE SHEATH
: 0-2369-1818
CONDUCTOR
B
3 CONDUCTOR COVERING TAPE FILLERS SEPERATOR TAPE
CIRCUIT IDENTIFICATION TAPE
CABLE STRUCTURE
NUMBER OF CORE : Single and 3 cores
CONDUCTOR : Compact round stranded annealed copper,
Sizes. 10 mm2 up to 1,000 mm2
INSULATION : Cross-linked polyethylene
Color : Natural (Translucent)
Core identification : Color tape
White, Red and Blue
SHEATH : PVC Color : Black
SHIELD : Copper tape, thickness 0.1 mm
CLASSIFICATION : Maximum conductor temperature 90 C
Circuit voltage not exceeding 3,600 volts
TESTING VOLTAGE : 6,500 volts
REFERENCE : IEC 60502-1
Number Nominal
of cross
core sectional
Minimum Mean Mean Approx. Maximum Minimum
number value of value of overall conductor insulation
of insulation sheath diameter resistance resistance
Maximum Cable Standard
continuous weight
current (approx.)
length
: 0-2369-1818
area
(mm2)
stranded thickness thickness
(/km)
at 20C
(M-km)
rating in
free air
(Ampere) (kg/km) (m)
10 6 2.0 1.4 12.0 1.83 2,900 90 220 500/D
16 6 2.0 1.4 13.0 1.15 2,450 115 290 500/D
25 6 2.0 1.4 14.5 0.727 2,050 155 390 500/D
35 6 2.0 1.4 15.5 0.524 1,800 190 490 500/D
50 6 2.0 1.4 16.5 0.387 1,550 230 600 500/D
70 12 2.0 1.5 18.5 0.268 1,350 285 850 500/D
1 95 15 2.0 1.5 21 0.193 1,150 350 1,100 500/D
120 18 2.0 1.6 22 0.153 1,050 410 1,400 500/D
150 18 2.0 1.6 24 0.124 950 465 1,600 500/D
185
240
30
34
2.0
2.0
1.7
1.8
26
28
0.0991
0.0754
850
750
535
630
2,000
2,600
500/D
500/D
B
300 34 2.0 1.8 30 0.0601 700 725 3,200 500/D 3
400 53 2.0 2.0 33 0.0470 600 840 4,000 500/D
CABLE
CONDUCTOR
INSULATION COPPER SHIELD TAPE SHEATH
: 0-2369-1818
EXTRUDED CONDUCTOR SHIELD
SEPERATOR TAPE
EXTRUDED INSULATION SHIELD
INSULATION COPPER SHIELD TAPE
SEPERATOR TAPE
CONDUCTOR
CABLE STRUCTURE
NUMBER OF CORE : Single and 3 cores
CONDUCTOR : Compact round stranded annealed copper,
Sizes. 10 mm2 up to 1,000 mm2
INSULATION : Cross-linked polyethylene
Color : Natural (Translucent)
Core identification : Color tape
White, Red and Blue
SHEATH : PVC Color : Black
SHIELD : Copper tape, thickness 0.1 mm
CLASSIFICATION : Maximum conductor temperature 90 C
Circuit voltage not exceeding 7,200 volts
TESTING VOLTAGE : 12,500 volts
REFERENCE : IEC 60502-2
*REMARK
INSULATION SHIELD LAYER : SEMI-CONDUCTING COVERING REMOVE AT SPLICES
OR TERMINALS
(
)
THAI-YAZAKI TECHNICAL DATA
B 46
3.6/6(7.2)KV-CV
IEC 60502-2
Number Nominal
of cross
core sectional
Minimum Mean Mean Approx. Maximum Minimum
number value of value of overall conductor insulation
of insulation sheath diameter resistance resistance
Maximum Cable Standard
continuous weight
current (approx.)
length
: 0-2369-1818
area
(mm2)
stranded thickness thickness
(/km)
at 20C
(M-km)
rating in
free air
(Ampere) (kg/km) (m)
**10 6 2.5 1.4 14.0 1.83 2,850 93 260 500/D
**16 6 2.5 1.5 15.5 1.15 2,500 120 350 500/D
25 6 2.5 1.5 17.5 0.727 2,150 160 480 500/D
35 6 2.5 1.5 18.5 0.524 1,900 195 600 500/D
50 6 2.5 1.6 20 0.387 1,700 230 750 500/D
70 12 2.5 1.6 21 0.268 1,500 290 950 500/D
1 95 15 2.5 1.7 24 0.193 1,300 355 1,200 500/D
120 18 2.5 1.7 25 0.153 1,200 410 1,500 500/D\
150 18 2.5 1.8 27 0.124 1,100 465 1,800 500/D
185
240
30
34
2.5
2.6
1.8
1.9
28
31
0.0991
0.0754
1,000
900
535
635
2,200
2,800
500/D
500/D
B
300 34 2.8 2.0 34 0.0601 900 725 3,400 500/D 3
400 53 3.0 2.1 37 0.0470 850 840 4,300 500/D
500 53 3.2 2.2 42 0.0366 800 970 5,500 500/D
630 53 3.2 2.4 46 0.0283 700 1,140 7,000 500/D
800 53 3.2 2.5 50 0.0221 600 1,330 8,500 300/D
1000 53 3.2 2.6 55 0.0176 550 1,520 11,000 300/D
CONDUCTOR INSULATION COPPER SHIELD TAPE
SHEATH
: 0-2369-1818
EXTRUDED CONDUCTOR SHIELD SEPERATOR TAPE
EXTRUDED INSULATION SHIELD
COPPER SHIELD TAPE
INSULATION SEPERATOR TAPE
CONDUCTOR
B FILLERS SHEATH
EXTRUDED CONDUCTOR SHIELD
CIRCUIT IDENTIFICATION TAPE
3 EXTRUDED INSULATION SHIELD
CABLE STRUCTURE
Number Nominal
of cross
core sectional
Minimum Mean Mean Approx. Maximum Minimum
number value of value of overall conductor insulation
of insulation sheath diameter resistance resistance
Maximum Cable Standard
continuous weight
current (approx.)
length
: 0-2369-1818
area
(mm2)
stranded thickness thickness
(/km)
at 20C
(M-km)
rating in
free air
(Ampere) (kg/km) (m)
16 6 3.4 1.5 18.5 1.15 3,100 120 440 500/D
25 6 3.4 1.6 20 0.727 2,700 160 550 500/D
35 6 3.4 1.6 21 0.524 2,450 195 700 500/D
50 6 3.4 1.7 22 0.387 2,200 235 850 500/D
70 12 3.4 1.7 24 0.268 1,900 290 1,100 500/D
95 15 3.4 1.8 26 0.193 1,700 355 1,300 500/D
120 18 3.4 1.8 27 0.153 1,550 410 1,600 500/D
1 150 18 3.4 1.9 29 0.124 1,450 465 1,900 500/D
185 30 3.4 1.9 31 0.0991 1,300 535 2,300 500/D
240 34 3.4 2.0 33 0.0754 1,150 630 2,900 500/D B
300 34 3.4 2.1 36 0.0601 1,050 725 3,500 500/D
400 53 3.4 2.2 39 0.0470 950 835 4,400 500/D 3
500 53 3.4 2.3 42 0.0366 850 975 5,500 500/D
630 53 3.4 2.4 46 0.0283 750 1,140 7,000 500/D
800 53 3.4 2.5 50 0.0221 650 1,330 8,500 500/D
1000 53 3.4 2.6 56 0.0176 600 1,520 11,000 300/D
CABLE
INSULATION
COPPER SHIELD TAPE SHEATH
: 0-2369-1818
CONDUCTOR
CABLE STRUCTURE
NUMBER OF CORE : Single and 3 cores
CONDUCTOR : Compact round stranded annealed copper,
Sizes. 25 mm2 up to 1,000 mm2
INSULATION : Cross-linked polyethylene
Color: Natural (Translucent)
Core identification : Color tape
White, Red and Blue
SHEATH : PVC Color : Black
SHIELD : Copper tape, thickness 0.1 mm
CLASSIFICATION : Maximum conductor temperature 90 C
Circuit voltage not exceeding 17,500 volts
TESTING VOLTAGE : 30,500 volts
REFERENCE : IEC 60502-2
*REMARK
INSULATION SHIELD LAYER : SEMI-CONDUCTING COVERING REMOVE AT SPLICES
OR TERMINALS
(
)
THAI-YAZAKI TECHNICAL DATA
B 50
8.7/15(17.5)KV-CV
IEC 60502-2
Number Nominal
of cross
core sectional
Minimum Mean Mean Approx. Maximum Minimum
number value of value of overall conductor insulation
of insulation sheath diameter resistance resistance
Maximum Cable Standard
continuous weight
current (approx.)
length
: 0-2369-1818
area
(mm2)
stranded thickness thickness
(/km)
at 20 C
(M-km)
rating in
free air
(Ampere) (kg/km) (m)
25 6 4.5 1.6 22 0.727 3,300 160 650 500/D
35 6 4.5 1.7 23 0.524 3,000 195 750 500/D
50 6 4.5 1.7 25 0.387 2,700 235 900 500/D
70 12 4.5 1.8 26 0.268 2,400 295 1,200 500/D
95 15 4.5 1.8 28 0.193 2,100 355 1,400 500/D
120 18 4.5 1.9 30 0.153 1,950 410 1,700 500/D
1 150 18 4.5 1.9 31 0.124 1,800 465 2,000 500/D
185 30 4.5 2.0 33 0.0991 1,650 535 2,400 500/D
240 34 4.5 2.1 36 0.0754 1,500 630 3,000 500/D B
300 34 4.5 2.1 38 0.0601 1,350 720 3,700 500/D
400 53 4.5 2.2 41 0.0470 1,200 835 4,500 500/D 3
500 53 4.5 2.3 45 0.0366 1,100 980 5,500 500/D
630 53 4.5 2.4 48 0.0283 950 1,145 7,000 500/D
800 53 4.5 2.6 53 0.0221 850 1,330 8,500 500/D
1000 53 4.5 2.7 58 0.0176 750 1,520 11,500 300/D
CABLE
INSULATION
COPPER SHIELD TAPE SHEATH
: 0-2369-1818
CONDUCTOR
B
EXTRUDED CONDUCTOR SHIELD
FILLERS SHEATH
3 EXTRUDED INSULATION SHIELD
CIRCUIT IDENTIFICATION TAPE
CABLE STRUCTURE
NUMBER OF CORE : Single and 3 cores
CONDUCTOR : Compact round stranded annealed copper,
Sizes. 35 mm2 up to 1,000 mm2
INSULATION : Cross-linked polyethylene
Color : Natural (Translucent)
Core identification : Color tape
White, Red and Blue
SHEATH : PVC Color : Black
SHIELD : Copper tape, thickness 0.1 mm
CLASSIFICATION : Maximum conductor temperature 90 C
Circuit voltage not exceeding 24,000 volts
TESTING VOLTAGE : 42,000 volts
REFERENCE : IEC 60502-2
*REMARK
INSULATION SHIELD LAYER : SEMI-CONDUCTING COVERING REMOVE AT SPLICES
OR TERMINALS
(
)
THAI-YAZAKI TECHNICAL DATA
B 52
12/20(24)KV-CV
IEC 60502-2
Number Nominal
of cross
core sectional
Minimum
nuber
of
Mean Mean Approx. Maximum Minimum
value of value of overall conductor insulation
insulation sheath diameter resistance resistance
Maximum Cable Standard
continuous weight
current (approx.)
length
: 0-2369-1818
area
(mm2)
stranded thickness thickness
(/km)
at 20C
(M-km)
rating in
free air
(Ampere) (kg/km) (m)
35 6 5.5 1.8 26 0.524 3,460 195 850 500/D
50 6 5.5 1.8 27 0.387 3,130 235 1,000 500/D
70 12 5.5 1.8 28 0.268 2,790 295 1,300 500/D
95 15 5.5 1.9 30 0.193 2,500 360 1,600 500/D
120 18 5.5 2.0 32 0.153 2,290 410 1,900 500/D
150 18 5.5 2.0 34 0.124 2,130 465 2,200 500/D
1 185 30 5.5 2.1 35 0.0991 1,970 535 2,600 500/D
240 34 5.5 2.1 38 0.0754 1,770 630 3,200 500/D
300 34 5.5 2.2 40 0.0601 1,620 720 3,800 500/D
B
400 53 5.5 2.3 43 0.0470 1,480 840 4,700 500/D 3
500 53 5.5 2.4 47 0.0366 1,320 980 6,000 500/D
630 53 5.5 2.5 51 0.0283 1,190 1,145 7,500 500/D
800 53 5.5 2.6 55 0.0221 1,070 1,330 9,000 500/D
1000 53 5.5 2.8 60 0.0176 940 1,520 11,500 300/D
: 0-2369-1818
CONDUCTOR
CABLE STRUCTURE
NUMBER OF CORE : Single and 3 cores
CONDUCTOR : Compact round stranded annealed copper,
Sizes. 35 mm2 up to 1,000 mm2
INSULATION : Cross-linked polyethylene
Color: Natural (Translucent)
Core identification : Color tape
White, Red and Blue
SHEATH : PVC Color : Black
SHIELD : Copper tape, thickness 0.1 mm
CLASSIFICATION : Maximum conductor temperature 90 C
Circuit voltage not exceeding 36,000 volts
TESTING VOLTAGE : 63,000 volts
REFERENCE : IEC 60502-2
*REMARK
INSULATION SHIELD LAYER : SEMI-CONDUCTING COVERING REMOVE AT SPLICES
OR TERMINALS
(
)
THAI-YAZAKI TECHNICAL DATA
B 54
18/30(36)KV-CV
IEC 60502-2
Number Nominal
of cross
core sectional
Minimum Mean Mean Approx. Maximum Minimum
number value of value of overall conductor insulation
of insulation sheath diameter resistance resistance
Maximum Cable Standard
continuous weight
current (approx.)
length
: 0-2369-1818
area
(mm2)
stranded thickness thickness
(/km)
at 20C
(M-km)
rating in
free air
(Ampere) (kg/km) (m)
35 6 8.9 2.0 33 0.524 4,680 195 1,200 500/D
50 6 8.0 2.0 32 0.387 4,010 235 1,300 500/D
70 12 8.0 2.0 34 0.268 3,620 295 1,500 500/D
95 15 8.0 2.1 36 0.193 3,260 355 1,900 500/D
120 18 8.0 2.1 37 0.153 3,020 410 2,200 500/D
150 18 8.0 2.2 39 0.124 2,820 465 2,500 500/D
1 185 30 8.0 2.2 41 0.0991 2,620 530 2,900 500/D
240 34 8.0 2.3 43 0.0754 2,370 630 3,500 500/D
300 34 8.0 2.4 46 0.0601 2,190 725 4,200 500/D
B
400 53 8.0 2.5 48 0.0470 2,000 845 5,000 500/D 3
500 53 8.0 2.6 52 0.0366 1,800 985 6,500 500/D
630 53 8.0 2.7 56 0.0283 1,630 1,145 7,500 500/D
800 53 8.0 2.8 60 0.0221 1,480 1,330 9,500 300/D
1000 53 8.0 3.0 66 0.0176 1,300 1,515 12,000 300/D
: 0-2369-1818
69 KV - CE (CU.WIRE SCREEN) 69 kV 90 C CROSS - LINKED POLYETHYLENE INSULATED AND B 57
PE JACKETED POWER CABLE. (IEC 60840)
115 KV - CE (CU.WIRE SCREEN) 115 kV 90 C CROSS - LINKED POLYETHYLENE INSULATED AND B 59
PE JACKETED POWER CABLE. (IEC 60840)
B
4
POLYETHYLENE JACKETED POWER CABLE
CONDUCTOR SHIELD
INSULATION SHIELD ALUMINIUM LAMINATE
COPPER WIRE SCREEN COPPER CONTACT TAPE B
4
CABLE STRUCTURE
NUMBER OF CORE : Single core
CONDUCTOR : Compact concentric stranded uncoated
annealed Copper conductor
INSULATION : Cross-linked polyethylene
Color: Natural
SHEATH : Ployethylene
TESTING VOLTAGE : 90,000 volts
CLASSIFICATION : Maximum conductor temperature 90 C
REFERENCE : IEC 60840 : 1999
Number Nominal Minimum Conductor Conductor Insulation
of cross number diameter shield thickness
cores sectional of approx. thickness nominal
Insulation Copper Jacket Overall Maximum Maximum Weight Standard
shield wire thickness diameter conductor Current
thickness area nominal approx. resistance Rating
of
cable
length
: 0-2369-1818
area stranded
(mm) (mm)
nominal
B
4
AND POLYETHYLENE JACKETED POWER CABLE
CONDUCTOR SHIELD
INSULATION SHIELD ALUMINIUM LAMINATE
COPPER WIRE SCREEN COPPER CONTACT TAPE B
4
CABLE STRUCTURE
NUMBER OF CORE : Single core
CONDUCTOR : Compact concentric stranded uncoated
annealed copper conductor
INSULATION : Cross-linked polyethylene
Color : Natural
SHEATH : Ployethylene
TESTING VOLTAGE : 160,000 volts
CLASSIFICATION : Maximum conductor temperature 90 C
REFERENCE : IEC 60840 : 1999
Number Nominal Minimum Conductor Conductor Insulation
of cross number diameter shield thickness
cores sectional of approx. thickness nominal
Insulation Copper Jacket Overall Maximum Maximum Weight Standard
shield wire thickness diameter conductor current
thickness area nominal approx. resistance rating
of
cable
length
: 0-2369-1818
area strands
(mm) (mm)
nominal
B
4
: 0-2369-1818
CVV 600 V.70 C PVC INSULATED AND SHEATHED CONTROL CABLE B 63
(THAI YAZAKI STANDARD)
CVV-S 600 V.70 C PVC INSULATED AND SHEATHED CONTROL CABLE B 63
WITH SHIELD (THAI YAZAKI STANDARD)
B
5
1 1 2
6 2 7 3
5 2
1
5 3 6 4
: 0-2369-1818
4 3 4 5
2 7
6 7 9 3 6 8
1
5 1 8 8 1 4 5 9
2
4 2 7 5 4 10
3 6 3
8 20 8 10 11
19 9 19 9 9 12
18 7 10 6 8 2
6 2 18 10 21 13
5 7 7 3
17 1 11 17 1 20 1
5 3 4 2 11 14
6 4
16 4 12 16 3 12 19 5
15
15 14 13 15 14 13 18
17 16
24 11 26 27 13 15 16 17
23 12 25 30 18
3 12 4 14 5
14 6
22 10 4 13 24 11 29 19
1 1 5 15 13 1 2 7
21 9 5 14 10 3 28 20
23 2 6 16 3
2 12
4 8
20 8 6 15 22 9 8 7 17
27
9 21
7 11 10
19 16 21 26 22
18 25
18 17 20 19 24 23
: 0-2369-1818
INSULATION BINDING TAPE SHEATH
CONDUCTOR
CONDUCTOR INSULATION
SHEATH
B
BINDING TAPE SEPARATOR TAPE
COPPER SHIELD TAPE 5
CABLE STRUCTURE
NUMBER OF CORE : 2 up to 48 cores
CONDUCTOR : Flexible stranded annealed copper wires
Sizes. : 0.5 mm2 up to 6 mm2
INSULATION : PVC
Color : 2-4 cores-Black, White, Red and Green
More than 4 cores : Black with marking
numbers, colored white,
printed continuously
throughout the whole
length of insulated wires for
the purpose of core
identification
SHEATH : PVC Color: Black
SHIELD : Copper tape
CLASSIFICATION : Maximum conductor temperature 70 C
Circuit voltage not exceeding 600 volts
TESTING VOLTAGE : 2,000 volts
REFERENCE : THAI YAZAKI STANDARD
THAI-YAZAKI TECHNICAL DATA
B 63
CVV
Number Nominal Number Approx. Insulation Sheath Approx. Maximum Minimum Cable Standard
of cross and diameter thickness thickness overall conductor insulation weight Length
core sectional diameter of diameter resistance resistance (approx.)
area of wire conductor at 20C at 70C
(mm2) (No./mm) (mm) (mm) (mm) (mm) (/km) (M-km) (kg/km) (m)
2
: 0-2369-1818
0.50
0.75
1.0
1.5
2.5
16/0.20
24/0.20
32/0.20
30/0.25
50/0.25
0.95
1.15
1.30
1.60
2.10
0.6
0.6
0.6
0.6
0.7
0.9
1.2
1.2
1.2
1.2
7.5
8.5
8.7
9.3
10.5
39.0
26.0
19.5
13.3
7.98
0.0130
0.0114
0.0104
0.0089
0.0081
49
65
75
90
130
500/D
500/D
500/D
500/D
500/D
4.0 56/0.30 2.60 0.8 1.2 12.0 4.95 0.0076 170 500/D
6.0 84/0.30 3.40 0.8 1.4 14.0 3.30 0.0061 250 500/D
0.50 16/0.20 0.95 0.6 1.2 8.5 39.0 0.0130 65 500/D
0.75 24/0.20 1.15 0.6 1.2 8.9 26.0 0.0114 80 500/D
1.0 32/0.20 1.30 0.6 1.2 9.1 19.5 0.0104 90 500/D
3 1.5 30/0.25 1.60 0.6 1.2 9.8 13.3 0.0089 110 500/D
2.5 50/0.25 2.10 0.7 1.2 11.0 7.98 0.0081 160 500/D
4.0 56/0.30 2.60 0.8 1.2 13.0 4.95 0.0076 230 500/D
6.0 84/0.30 3.40 0.8 1.4 15.0 3.30 0.0061 330 500/D
0.50 16/0.20 0.95 0.6 1.2 9.1 39.0 0.0130 80 500/D
0.75 24/0.20 1.15 0.6 1.2 9.6 26.0 0.0114 95 500/D
1.0 32/0.20 1.30 0.6 1.2 9.8 19.5 0.0104 110 500/D
B 4 1.5
2.5
30/0.25
50/0.25
1.60
2.10
0.6
0.7
1.2
1.2
10.5
12.0
13.3
7.98
0.0089
0.0081
140
200
500/D
500/D
4.0 56/0.30 2.60 0.8 1.4 14.5 4.95 0.0076 300 500/D
5 6.0 84/0.30 3.40 0.8 1.4 16.5 3.30 0.0061 410 500/D
0.50 16/0.20 0.95 0.6 1.2 9.8 39.0 0.0130 90 500/D
0.75 24/0.20 1.15 0.6 1.2 10.0 26.0 0.0114 110 500/D
1.0 32/0.20 1.30 0.6 1.2 10.5 19.5 0.0104 130 500/D
5 1.5 30/0.25 1.60 0.6 1.2 11.5 13.3 0.0089 160 500/D
2.5 50/0.25 2.10 0.7 1.4 13.5 7.98 0.0081 250 500/D
4.0 56/0.30 2.60 0.8 1.4 15.5 4.95 0.0076 350 500/D
6.0 84/0.30 3.40 0.8 1.4 18.0 3.30 0.0061 500 500/D
0.50 16/0.20 0.95 0.6 1.2 10.5 39.0 0.0130 110 500/D
0.75 24/0.20 1.15 0.6 1.2 11.0 26.0 0.0114 130 500/D
1.0 32/0.20 1.30 0.6 1.2 11.5 19.5 0.0104 150 500/D
6 1.5 30/0.25 1.60 0.6 1.2 12.0 13.3 0.0089 190 500/D
2.5 50/0.25 2.10 0.7 1.4 14.5 7.98 0.0081 290 500/D
4.0 56/0.30 2.60 0.8 1.4 17.0 4.95 0.0076 420 500/D
6.0 84/0.30 3.40 0.8 1.4 19.5 3.30 0.0061 600 500/D
0.50 16/0.20 0.95 0.6 1.2 10.5 39.0 0.0130 110 500/D
0.75 24/0.20 1.15 0.6 1.2 11.0 26.0 0.0114 140 500/D
1.0 32/0.20 1.30 0.6 1.2 11.5 19.5 0.0104 160 500/D
7 1.5 30/0.25 1.60 0.6 1.2 12.0 13.3 0.0089 210 500/D
2.5 50/0.25 2.10 0.7 1.4 14.5 7.98 0.0081 320 500/D
4.0 56/0.30 2.60 0.8 1.4 17.0 4.95 0.0076 460 500/D
6.0 84/0.30 3.40 0.8 1.4 19.5 3.30 0.0061 650 500/D
0.50 16/0.20 0.95 0.6 1.2 11.0 39.0 0.0130 130 500/D
0.75 24/0.20 1.15 0.6 1.2 11.5 26.0 0.0114 160 500/D
1.0 32/0.20 1.30 0.6 1.2 12.0 19.5 0.0104 180 500/D
8 1.5 30/0.25 1.60 0.6 1.4 13.5 13.3 0.0089 240 500/D
2.5 50/0.25 2.10 0.7 1.4 16.0 7.98 0.0081 360 500/D
4.0 56/0.30 2.60 0.8 1.4 18.5 4.95 0.0076 550 500/D
6.0 84/0.30 3.40 0.8 1.4 21.0 3.30 0.0061 750 500/D
0.50 16/0.20 0.95 0.6 1.2 12.0 39.0 0.0130 150 500/D
0.75 24/0.20 1.15 0.6 1.2 12.5 26.0 0.0114 180 500/D
1.0 32/0.20 1.30 0.6 1.4 13.5 19.5 0.0104 220 500/D
9 1.5 30/0.25 1.60 0.6 1.4 14.5 13.3 0.0089 270 500/D
2.5 50/0.25 2.10 0.7 1.4 17.0 7.98 0.0081 410 500/D
4.0 56/0.30 2.60 0.8 1.4 20.0 4.95 0.0076 600 500/D
6.0 84/0.30 3.40 0.8 1.4 23.0 3.30 0.0061 850 500/D
core sectional diameter of diameter resistance resistance (approx.)
area of wire conductor at 20C at 70C
(mm2) (No./mm) (mm) (mm) (mm) (mm) (/km) (M-km) (kg/km) (m)
10
: 0-2369-1818
0.50
0.75
1.0
1.5
2.5
16/0.20
24/0.20
32/0.20
30/0.25
50/0.25
0.95
1.15
1.30
1.60
2.10
0.6
0.6
0.6
0.6
0.7
1.2
1.4
1.4
1.4
1.4
12.5
14.0
14.5
15.5
18.0
39.0
26.0
19.5
13.3
7.98
0.0130
0.0114
0.0104
0.0089
0.0081
150
210
240
310
460
500/D
500/D
500/D
500/D
500/D
4.0 56.030 2.60 0.8 1.4 21.0 4.95 0.0076 650 500/D
6.0 84/0.30 3.40 0.8 1.8 25.0 3.30 0.0061 1,000 500/D
0.50 16/0.20 0.95 0.6 1.2 12.5 39.0 0.0130 170 500/D
0.75 24/0.20 1.15 0.6 1.4 14.0 26.0 0.0114 210 500/D
1.0 32/0.20 1.30 0.6 1.4 14.5 19.5 0.0104 250 500/D
11 1.5 30/0.25 1.60 0.6 1.4 15.5 13.3 0.0089 320 500/D
2.5 50/0.25 2.10 0.7 1.4 18.0 7.98 0.0081 480 500/D
4.0 56/0.30 2.60 0.8 1.4 21.0 4.95 0.0076 700 500/D
6.0 84/0.30 3.40 0.8 1.8 25.0 3.30 0.0061 1,100 500/D
0.50 16/0.20 0.95 0.6 1.2 13.0 39.0 0.0130 180 500/D
0.75 24/0.20 1.15 0.6 1.4 14.5 26.0 0.0114 220 500/D
1.0 32/0.20 1.30 0.6 1.4 15.0 19.5 0.0104 280 500/D
12 1.5
2.5
30/0.25
50/0.25
1.60
2.10
0.6
0.7
1.4
1.4
16.0
19.0
13.3
7.98
0.0089
0.0081
350
550
500/D
500/D
B
4.0 56/0.30 2.60 0.8 1.4 22.0 4.95 0.0076 750 500/D
6.0 84/0.30 3.40 0.8 1.8 26.0 3.30 0.0061 1,200 500/D 5
0.50 16/0.20 0.95 0.6 1.4 14.0 39.0 0.0130 200 500/D
0.75 24/0.20 1.15 0.6 1.4 15.0 26.0 0.0114 250 500/D
1.0 32/0.20 1.30 0.6 1.4 15.5 19.5 0.0104 290 500/D
13 1.5 30/0.25 1.60 0.6 1.4 17.0 13.3 0.0089 370 500/D
2.5 50/0.25 2.10 0.7 1.4 20.0 7.98 0.0081 550 500/D
4.0 56/0.30 2.60 0.8 1.4 23.0 4.95 0.0076 850 500/D
6.0 84/0.30 3.40 0.8 1.8 28.0 3.30 0.0061 1,200 500/D
0.50 16/0.20 0.95 0.6 1.4 14.0 39.0 0.0130 210 500/D
0.75 24/0.20 1.15 0.6 1.4 15.0 26.0 0.0114 250 500/D
1.0 32/0.20 1.30 0.6 1.4 15.5 19.5 0.0104 300 500/D
14 1.5 30/0.25 1.60 0.6 1.4 17.0 13.3 0.0089 390 500/D
2.5 50/0.25 2.10 0.7 1.4 20.0 7.98 0.0081 600 500/D
4.0 56/0.30 2.60 0.8 1.4 23.0 4.95 0.0076 850 500/D
6.0 84/0.30 3.40 0.8 1.8 28.0 3.30 0.0061 1,300 500/D
0.50 16/0.20 0.95 0.6 1.4 14.5 39.0 0.0130 220 500/D
0.75 24/0.20 1.15 0.6 1.4 15.5 26.0 0.0114 270 500/D
1.0 32/0.20 13.30 0.6 1.4 16.0 19.5 0.0104 320 500/D
15 1.5 30/0.25 1.60 0.6 1.4 17.5 13.3 0.0089 420 500/D
2.5 50/0.25 2.10 0.7 1.4 21.0 7.98 0.0081 650 500/D
4.0 56/0.30 2.60 0.8 1.8 25.0 4.95 0.0076 950 500/D
6.0 84/0.30 3.40 0.8 1.8 29.0 3.30 0.0061 1,400 500/D
0.50 16/0.20 0.95 0.6 1.4 15.0 39.0 0.0130 230 500/D
0.75 24/0.20 1.15 0.6 1.4 15.5 26.0 0.0114 280 500/D
1.0 32/0.20 1.30 0.6 1.4 16.0 19.5 0.0104 340 500/D
16 1.5 30/0.25 1.60 0.6 1.4 17.5 13.3 0.0089 430 500/D
2.5 50/0.25 2.10 0.7 1.4 21.0 7.98 0.0081 650 500/D
4.0 56/0.30 2.60 0.8 1.8 25.0 4.95 0.0076 1,000 500/D
6.0 84/0.30 3.40 0.8 1.8 29.0 3.30 0.0061 1,400 500/D
0.50 16/0.20 0.95 0.6 1.4 15.5 39.0 0.0130 240 500/D
0.75 24/0.20 1.15 0.6 1.4 16.5 26.0 0.0114 310 500/D
1.0 32/0.20 1.30 0.6 1.4 17.0 19.5 0.0104 370 500/D
17 1.5 30/0.25 1.60 0.6 1.4 18.5 13.3 0.0089 470 500/D
2.5 50/0.25 2.10 0.7 1.4 22.0 7.98 0.0081 700 500/D
4.0 56/0.30 2.60 0.8 1.8 27.0 4.95 0.0076 1,100 500/D
6.0 84/0.30 3.40 0.8 1.8 31.0 3.30 0.0061 1,600 500/D
core sectional diameter of diameter resistance resistance (approx.)
area of wire conductor at 20C at 70C
(mm2) (No./mm) (mm) (mm) (mm) (mm) (/km) (M-km) (kg/km) (m)
18
: 0-2369-1818
0.50
0.75
1.0
1.5
2.5
16/0.20
24/0.20
32/0.20
30/0.25
50/0.25
0.95
1.15
1.30
1.60
2.10
0.6
0.6
0.6
0.6
0.7
1.4
1.4
1.4
1.4
1.4
15.5
16.5
17.0
18.5
22.0
39.0
26.0
19.5
13.3
7.98
0.0130
0.0114
0.0104
0.0089
0.0081
250
310
370
470
700
500/D
500/D
500/D
500/D
500/D
4.0 56/0.30 2.60 0.8 1.8 27.0 4.95 0.0076 1,100 500/D
6.0 84/0.30 3.40 0.8 1.8 31.0 3.30 0.0061 1,600 500/D
0.50 16/0.20 0.95 0.6 1.4 15.5 39.0 0.0130 260 500/D
0.75 24/0.20 1.15 0.6 1.4 16.5 26.0 0.0114 320 500/D
1.0 32/0.20 1.30 0.6 1.4 17.0 19.5 0.0104 380 500/D
19 1.5 30/0.25 1.60 0.6 1.4 18.5 13.3 0.0089 490 500/D
2.5 50/0.25 2.10 0.7 1.4 22.0 7.98 0.0081 750 500/D
4.0 56/0.30 2.60 0.8 1.8 27.0 4.95 0.0076 1,100 500/D
6.0 84/0.30 3.40 0.8 1.8 31.0 3.30 0.0061 1,600 500/D
0.50 16/0.20 0.95 0.6 1.4 16.0 39.0 0.0130 270 500/D
0.75 24/0.20 1.15 0.6 1.4 17.0 26.0 0.0114 330 500/D
1.0 32/0.20 1.30 0.6 1.4 17.5 19.5 0.0104 400 500/D
B 20 1.5
2.5
30/0.25
50/0.25
1.60
2.10
0.6
0.7
1.4
1.4
19.0
23.0
13.3
7.98
0.0089
0.0081
500
800
500/D
500/D
4.0 56/0.30 2.60 0.8 1.8 28.0 4.95 0.0076 1,200 500/D
5 6.0 84/0.30 3.40 0.8 1.8 32.0 3.30 0.0061 1,700 500/D
0.50 16/0.20 0.95 0.6 1.4 16.5 39.0 0.0130 280 500/D
0.75 24/0.20 1.15 0.6 1.4 17.5 26.0 0.0114 350 500/D
1.0 32/0.20 1.30 0.6 1.4 18.0 19.5 0.0104 420 500/D
21 1.5 30/0.25 1.60 0.6 1.4 19.5 13.3 0.0089 550 500/D
2.5 50/0.25 2.10 0.7 1.4 23.0 7.98 0.0081 800 500/D
4.0 56/0.30 2.60 0.8 1.8 28.0 4.95 0.0076 1,300 500/D
6.0 84/0.30 3.40 0.8 1.8 32.0 3.30 0.0061 1,800 500/D
0.50 16/0.20 0.95 0.6 1.4 17.0 39.0 0.0130 300 500/D
0.75 24/0.20 1.15 0.6 1.4 18.0 26.0 0.0114 370 500/D
1.0 32/0.20 1.30 0.6 1.4 18.5 19.5 0.0104 450 500/D
22 1.5 30/0.25 1.60 0.6 1.4 20.0 13.3 0.0089 550 500/D
2.5 50/0.25 2.10 0.7 1.8 25.0 7.98 0.0081 900 500/D
4.0 56/0.30 2.60 0.8 1.8 30.0 4.95 0.0076 1,300 500/D
6.0 84/0.30 3.40 0.8 1.8 34.0 3.30 0.0061 1,900 500/D
0.50 16/0.20 0.95 0.6 1.4 17.0 39.0 0.0130 310 500/D
0.75 24/0.20 1.15 0.6 1.4 18.0 26.0 0.0114 380 500/D
1.0 32/0.20 1.30 0.6 1.4 18.5 19.5 0.0104 460 500/D
23 1.5 30/0.25 1.60 0.6 1.4 20.0 13.3 0.0089 600 500/D
2.5 50/0.25 2.10 0.7 1.8 25.0 7.98 0.0081 950 500/D
4.0 56/0.30 2.60 0.8 1.8 30.0 4.95 0.0076 1,400 500/D
6.0 84/0.30 3.40 0.8 1.8 34.0 3.30 0.0061 2,000 500/D
0.50 16/0.20 0.95 0.6 1.4 18.0 39.0 0.0130 320 500/D
0.75 24/0.20 1.15 0.6 1.4 19.0 26.0 0.0114 400 500/D
1.0 32/0.20 1.30 0.6 1.4 19.5 19.5 0.0104 500 500/D
24 1.5 30/0.25 1.60 0.6 1.4 21.0 13.3 0.0089 600 500/D
2.5 50/0.25 2.10 0.7 1.8 26.0 7.98 0.0081 1,000 500/D
4.0 56/0.30 2.60 0.8 1.8 31.0 4.95 0.0076 1,400 500/D
6.0 84/0.30 3.40 0.8 2.2 37.0 3.30 0.0061 2,100 500/D
0.50 16/0.20 0.95 0.6 1.4 18.0 39.0 0.0130 330 500/D
0.75 24/0.20 1.15 0.6 1.4 19.0 26.0 0.0114 410 500/D
1.0 32/0.20 1.30 0.6 1.4 19.5 19.5 0.0104 490 500/D
25 1.5 30/0.25 1.60 0.6 1.4 21.0 13.3 0.0089 650 500/D
2.5 50/0.25 2.10 0.7 1.8 26.0 7.98 0.0081 1,000 500/D
4.0 56/0.30 2.60 0.8 1.8 31.0 4.95 0.0076 1,500 500/D
6.0 84/0.30 3.40 0.8 2.2 37.0 3.30 0.0061 2,200 500/D
core sectional diameter of diameter resistance resistance (approx.)
area of wire conductor at 20C at 70C
(mm2) (No./mm) (mm) (mm) (mm) (mm) (/km) (M-km) (kg/km) (m)
26
: 0-2369-1818
0.50
0.75
1.0
1.5
2.5
16/0.20
24/0.20
32/0.20
30/0.25
50/0.25
0.95
1.15
1.30
1.60
2.10
0.6
0.6
0.6
0.6
0.7
1.4
1.4
1.4
1.4
1.8
18.0
19.0
19.5
21.0
26.0
39.0
26.0
19.5
13.3
7.98
0.0130
0.0114
0.0104
0.0089
0.0081
340
420
500
650
1,000
500/D
500/D
500/D
500/D
500/D
4.0 56/0.30 2.60 0.8 1.8 31.0 4.95 0.0076 1,500 500/D
6.0 84/0.30 3.40 0.8 2.2 37.0 3.30 0.0061 2,300 500/D
0.50 16/0.20 0.95 0.6 1.4 18.5 39.0 0.0130 340 500/D
0.75 24/0.20 1.15 0.6 1.4 19.5 26.0 0.0114 430 500/D
1.0 32/0.20 1.30 0.6 1.4 20.0 19.5 0.0104 500 500/D
27 1.5 30/0.25 1.60 0.6 1.4 22.0 13.3 0.0089 650 500/D
2.5 50/0.25 2.10 0.7 1.8 27.0 7.98 0.0081 1,100 500/D
4.0 56/0.30 2.60 0.8 1.8 32.0 4.95 0.0076 1,600 500/D
6.0 84/0.30 3.40 0.8 2.2 38.0 3.30 0.0061 2,400 500/D
0.50 16/0.20 0.95 0.6 1.4 19.0 39.0 0.0130 370 500/D
0.75 24/0.20 1.15 0.6 1.4 20.0 26.0 0.0114 460 500/D
1.0 32/0.20 1.30 0.6 1.4 21.0 19.5 0.0104 550 500/D
28 1.5
2.5
30/0.25
50/0.25
1.60
2.10
0.6
0.7
1.4
1.8
23.0
28.0
13.3
7.98
0.0089
0.0081
700
1,100
500/D
500/D
B
4.0 56/0.30 2.60 0.8 1.8 33.0 4.95 0.0076 1,700 500/D
6.0 84/0.30 3.40 0.8 2.2 39.0 3.30 0.0061 2,500 500/D 5
0.50 16/0.20 0.95 0.6 1.4 19.0 39.0 0.0130 370 500/D
0.75 24/0.20 1.15 0.6 1.4 20.0 26.0 0.0114 460 500/D
1.0 32/0.20 1.30 0.6 1.4 21.0 19.5 0.0104 550 500/D
29 1.5 30/0.25 1.60 0.6 1.4 23.0 13.3 0.0089 700 500/D
2.5 50/0.25 2.10 0.7 1.8 28.0 7.98 0.0081 1,100 500/D
4.0 56/0.30 2.60 0.8 1.8 33.0 4.95 0.0076 1,700 500/D
6.0 84/0.30 3.40 0.8 2.2 39.0 3.30 0.0061 2,500 500/D
0.50 16/0.20 0.95 0.6 1.4 19.0 39.0 0.0130 370 500/D
0.75 24/0.20 1.15 0.6 1.4 20.0 26.0 0.0114 470 500/D
1.0 32/0.20 1.30 0.6 1.4 21.0 19.5 0.0104 550 500/D
30 1.5 30/0.25 1.60 0.6 1.4 23.0 13.3 0.0089 750 500/D
2.5 50/0.25 2.10 0.7 1.8 28.0 7.98 0.0081 1,200 500/D
4.0 56/0.30 2.60 0.8 1.8 33.0 4.95 0.0076 1,700 500/D
6.0 84/0.30 3.40 0.8 2.2 39.0 3.30 0.0061 2,600 500/D
0.50 16/0.20 0.95 0.6 1.4 19.5 39.0 0.0130 400 500/D
0.75 24/0.20 1.15 0.6 1.4 21.0 26.0 0.0114 500 500/D
1.0 32/0.20 1.30 0.6 1.4 22.0 19.5 0.0104 600 500/D
31 1.5 30/0.25 1.6 0.6 1.8 24.0 13.3 0.0089 850 500/D
2.5 50/0.25 2.10 0.7 1.8 29.0 7.98 0.0081 1,300 500/D
4.0 56/0.30 2.60 0.8 1.8 34.0 4.95 0.0076 1,800 500/D
6.0 84/0.30 3.40 0.8 2.2 41.0 3.30 0.0061 2,700 500/D
0.50 16/0.20 0.95 0.6 1.4 19.5 39.0 0.0130 400 500/D
0.75 24/0.20 1.15 0.6 1.4 21.0 26.0 0.0114 500 500/D
1.0 32/0.20 1.30 0.6 1.4 22.0 19.5 0.0104 600 500/D
32 1.5 30/0.25 1.60 0.6 1.8 24.0 13.3 0.0089 850 500/D
2.5 50/0.25 2.10 0.7 1.8 29.0 7.98 0.0081 1,300 500/D
4.0 56/0.30 2.60 0.8 1.8 34.0 4.95 0.0076 1,900 500/D
6.0 84/0.30 3.40 0.8 2.2 41.0 3.30 0.0061 2,800 500/D
0.50 16/0.20 0.95 0.6 1.4 19.5 39.0 0.0130 400 500/D
0.75 24/0.20 1.15 0.6 1.4 21.0 26.0 0.0114 500 500/D
1.0 32/0.20 1.30 0.6 1.4 22.0 19.5 0.0104 600 500/D
33 1.5 30/0.25 1.60 0.6 1.8 24.0 13.3 0.0089 850 500/D
2.5 50/0.25 2.10 0.7 1.8 29.0 7.98 0.0081 1,300 500/D
4.0 56/0.30 2.60 0.8 1.8 34.0 4.95 0.0076 1,900 500/D
6.0 84/0.30 3.40 0.8 2.2 41.0 3.30 0.0061 2,800 500/D
core sectional diameter of diameter resistance resistance (approx.)
area of wire conductor at 20C at 70C
(mm2) (No./mm) (mm) (mm) (mm) (mm) (/km) (M-km) (kg/km) (m)
34
: 0-2369-1818
0.50
0.75
1.0
1.5
2.5
16/0.20
24/0.20
32/0.20
30/0.25
50/0.25
0.95
1.15
1.30
1.60
2.10
0.6
0.6
0.6
0.6
0.7
1.4
1.4
1.4
1.8
1.8
20.0
21.0
22.0
25.0
30.0
39.0
26.0
19.5
13.3
7.98
0.0130
0.0114
0.0104
0.0089
0.0081
430
550
650
900
1,400
500/D
500/D
500/D
500/D
500/D
4.0 56/0.30 2.60 0.8 2.2 37.0 4.95 0.0076 2,100 500/D
6.0 84/0.30 3.40 0.8 2.2 42.0 3.30 0.0061 3,000 500/D
0.50 16/0.20 0.95 0.6 1.4 20.0 39.0 0.0130 430 500/D
0.75 24/0.20 1.15 0.6 1.4 21.0 26.0 0.0114 550 500/D
1.0 32/0.20 1.30 0.6 1.4 22.0 19.5 0.0104 650 500/D
35 1.5 30/0.25 1.60 0.6 1.8 25.0 13.3 0.0089 900 500/D
2.5 50/0.25 2.10 0.7 1.8 30.3 7.98 0.0081 1,400 500/D
4.0 56/0.30 2.60 0.8 2.2 37.0 4.95 0.0076 2,100 500/D
6.0 84/0.30 3.40 0.8 2.2 42.0 3.30 0.0061 3,000 500/D
0.50 16/0.20 0.95 0.6 1.4 20.0 39.0 0.0130 440 500/D
0.75 24/0.20 1.15 0.6 1.4 21.0 26.0 0.0114 550 500/D
1.0 32/0.20 1.30 0.6 1.4 22.0 19.5 0.0104 650 500/D
B 36 1.5
2.5
30/0.25
50/0.25
1.60
2.10
0.6
0.7
1.8
1.8
25.0
30.0
13.3
7.98
0.0089
0.0081
900
1,400
500/D
500/D
4.0 56/0.30 2.60 0.8 2.2 37.0 4.95 0.0076 2,100 500/D
5 6.0 84/0.30 3.40 0.8 2.2 42.0 3.30 0.0061 3,100 500/D
0.50 16/0.20 0.95 0.6 1.4 20.0 39.0 0.0130 450 500/D
0.75 24/0.20 1.15 0.6 1.4 21.0 26.0 0.0114 550 500/D
1.0 32/0.20 1.30 0.6 1.4 22.0 19.5 0.0104 700 500/D
37 1.5 30/0.25 1.60 0.6 1.8 25.0 13.3 0.0089 950 500/D
2.5 50/0.25 2.10 0.7 1.8 30.0 7.98 0.0081 1,400 500/D
4.0 56/0.30 2.60 0.8 2.2 37.0 4.95 0.0076 2,200 500/D
6.0 84/0.30 3.40 0.8 2.2 42.0 3.30 0.0061 3,100 500/D
0.50 16/0.20 0.95 0.6 1.4 21.0 39.0 0.0130 460 500/D
0.75 247/0.20 1.15 0.6 1.4 22.0 26.0 0.0114 600 500/D
1.0 32/0.20 1.30 0.6 1.4 23.0 19.5 0.0104 700 500/D
38 1.5 30/0.25 1.60 0.6 1.8 26.0 13.3 0.0089 950 500/D
2.5 50/0.25 2.10 0.7 1.8 31.0 7.98 0.0081 1,500 500/D
4.0 56/0.30 2.60 0.8 2.2 38.0 4.95 0.0076 2,200 500/D
6.0 84/0.30 3.40 0.8 2.2 44.0 3.30 0.0061 3,300 500/D
0.50 16/0.20 0.95 0.6 1.4 21.0 39.0 0.0130 470 500/D
0.75 24/0.20 1.15 0.6 1.4 22.0 26.0 0.0114 600 500/D
1.0 32/0.20 1.30 0.6 1.4 23.0 19.5 0.0104 700 500/D
39 1.5 30/0.25 1.60 0.6 1.8 26.0 13.3 0.0089 1,000 500/D
2.5 50/0.25 2.10 0.7 1.8 31.0 7.98 0.0081 1,500 500/D
4.0 56/0.30 2.60 0.8 2.2 38.0 4.95 0.0076 2,300 500/D
6.0 84/0.30 3.40 0.8 2.2 44.0 3.30 0.0061 3,300 500/D
0.50 16/0.20 0.95 0.6 1.4 21.0 39.0 0.0130 480 500/D
0.75 24/0.20 1.15 0.6 1.4 22.0 26.0 0.0114 600 500/D
1.0 32/0.20 1.30 0.6 1.4 23.0 19.5 0.0104 750 500/D
40 1.5 30/0.25 1.60 0.6 1.8 26.0 13.3 0.0089 1,000 500/D
2.5 50/0.25 2.10 0.7 1.8 31.0 7.98 0.0081 1,500 500/D
4.0 56/0.30 2.60 0.8 2.2 38.0 4.95 0.0076 2,300 500/D
6.0 84/0.30 3.40 0.8 2.2 44.0 3.30 0.0061 3,400 500/D
0.50 16/0.20 0.95 0.6 1.4 22.0 39.0 0.0130 500 500/D
0.75 24/0.20 1.15 0.6 1.4 23.0 26.0 0.0114 650 500/D
1.0 32/0.20 1.30 0.6 1.8 25.0 19.5 0.0104 800 500/D
41 1.5 30/0.25 1.60 0.6 1.8 27.0 13.3 0.0089 1,000 500/D
2.5 50/0.25 2.10 0.7 1.8 33.0 7.98 0.0081 1,600 500/D
4.0 56/0.30 2.60 0.8 2.2 40.0 4.95 0.0076 2,400 500/D
6.0 84/0.30 3.40 0.8 2.2 46.0 3.30 0.0061 3,500 500/D
core sectional diameter of diameter resistance resistance (approx.)
area of wire conductor at 20C at 70C
(mm2) (No./mm) (mm) (mm) (mm) (mm) (/km) (M-km) (kg/km) (m)
42
: 0-2369-1818
0.50
0.75
1.0
1.5
2.5
16/0.20
24/0.20
32/0.20
30/0.25
50/0.25
0.95
1.15
1.30
1.60
2.10
0.6
0.6
0.6
0.6
0.7
1.4
1.4
1.8
1.8
1.8
22.0
23.0
25.0
27.0
33.0
39.0
26.0
19.5
13.3
7.98
0.0130
0.0114
0.0104
0.0089
0.0081
500
650
800
1,100
1,600
500/D
500/D
500/D
500/D
500/D
4.0 56/0.30 2.60 0.8 2.2 40.0 4.95 0.0076 2,500 500/D
6.0 84/0.30 3.40 0.8 2.2 46.0 3.30 0.0061 3,600 500/D
0.50 16/0.20 0.95 0.6 1.4 22.0 39.0 0.0130 500 500/D
0.75 24/0.20 1.15 0.6 1.4 23.0 26.0 0.0114 650 500/D
1.0 32/0.20 1.30 0.6 1.8 25.0 19.5 0.0104 850 500/D
43 1.5 30/0.25 1.60 0.6 1.8 27.0 13.3 0.0089 1,100 500/D
2.5 50/0.25 2.10 0.7 1.8 33.0 7.98 0.0081 1,600 500/D
4.0 56/0.30 2.60 0.8 2.2 40.0 4.95 0.0076 2,500 500/D
6.0 84/0.30 3.40 0.8 2.2 46.0 3.30 0.0061 3,600 500/D
0.50 16/0.20 0.95 0.6 1.4 22.0 39.0 0.0130 550 500/D
0.75 24/0.20 1.15 0.6 1.4 24.0 26.0 0.0114 650 500/D
1.0 32/0.20 1.30 0.6 1.8 26.0 19.5 0.0104 850 500/D
44 1.5
2.5
30/0.25
50/0.25
1.60
2.10
0.6
0.7
1.8
1.8
28.0
34.0
13.3
7.98
0.0089
0.0081
1,100
1,700
500/D
500/D
B
4.0 56/0.30 2.60 0.8 2.2 41.0 4.95 0.0076 2,600 500/D
6.0 84/0.30 3.40 0.8 2.6 48.0 3.30 0.0061 3,800 500/D 5
0.50 16/0.20 0.95 0.6 1.4 22.0 39.0 0.0130 550 500/D
0.75 24/0.20 1.15 0.6 1.4 24.0 26.0 0.0114 700 500/D
1.0 32/0.20 1.30 0.6 1.8 26.0 19.5 0.0104 850 500/D
45 1.5 30/0.25 1.60 0.6 1.8 28.0 13.3 0.0089 1,100 500/D
2.5 50/0.25 2.10 0.7 1.8 34.0 7.98 0.0081 1,700 500/D
4.0 56/0.30 2.60 0.8 2.2 41.0 4.95 0.0076 2,600 500/D
6.0 84/0.30 3.40 0.8 2.6 48.0 3.30 0.0061 3,900 500/D
0.50 16/0.20 0.95 0.6 1.4 22.0 39.0 0.0130 550 500/D
0.75 24/0.20 1.15 0.6 1.4 24.0 26.0 0.0114 700 500/D
1.0 32/0.20 1.30 0.6 1.8 26.0 19.5 0.0104 900 500/D
46 1.5 30/0.25 1.60 0.6 1.8 28.0 13.3 0.0089 1,100 500/D
2.5 50/0.25 2.10 0.7 1.8 34.0 7.98 0.0081 1,800 500/D
4.0 56/0.30 2.60 0.8 2.2 41.0 4.95 0.0076 2,700 500/D
6.0 84/0.30 3.40 0.8 2.6 48.0 3.30 0.0061 4,000 500/D
0.50 16/0.20 0.95 0.6 1.4 22.0 39.0 0.0130 550 500/D
0.75 24/0.20 1.15 0.6 1.4 24.0 26.0 0.0114 700 500/D
1.0 32/0.20 1.30 0.6 1.8 26.0 19.5 0.0104 900 500/D
47 1.5 30/0.25 1.60 0.6 1.8 28.0 13.3 0.0089 1,200 500/D
2.5 50/0.25 2.10 0.7 1.8 34.0 7.98 0.0081 1,800 500/D
4.0 56/0.30 2.60 0.8 2.2 41.0 4.95 0.0076 2,700 500/D
6.0 84/0.30 3.40 0.8 2.6 48.0 3.30 0.0061 4,000 500/D
0.50 16/0.20 0.95 0.6 1.4 23.0 39.0 0.0130 550 500/D
0.75 24/0.20 1.15 0.6 1.8 25.0 26.0 0.0114 750 500/D
1.0 32/0.20 1.30 0.6 1.8 26.0 19.5 0.0104 900 500/D
48 1.5 30/0.25 1.60 0.6 1.8 29.0 13.3 0.0089 1,200 500/D
2.5 50/0.25 2.10 0.7 1.8 34.0 7.98 0.0081 1,800 500/D
4.0 56/0.30 2.60 0.8 2.2 42.0 4.95 0.0076 2,800 500/D
6.0 84/0.30 3.40 0.8 2.6 49.0 3.30 0.0061 4,100 500/D
This table show only flexible stranded condutor. If you want to have solid or concentric conductor type, please contact
with our sales department for CVV-S : The overall diameter of cable and cable weight shall be change a little bit more.
D : Packing in drum.
*Remark : Special protection can be produce.
: 0-2369-1818
VSF 300 V. 70 C PVC INSULATED FLEXIBLE CONDUCTOR, SINGLE B 71
CORE (TIS 11 TABLE 10)
VTF 300 V. 70 C PVC INSULATED TWISTED FLEXIBLE CONDUCTOR B 73
(TIS 11 TABLE 10)
VFF 300 V. 70 C PVC INSULATED FLAT - TYPE, FLEXIBLE B 75
CONDUCTOR (TIS 11 TABLE 10)
B VFF-GRD 300 V. 70 C PVC INSULATED FLAT - TYPE, FLEXIBLE B 77
CONDUCTOR WITH GROUND (TIS 11 TABLE 16)
6
VKF 300 V. 70 C PVC INSULATED AND SHEATHED FLAT - TYPE, B 79
FLEXIBLE CONDUCTOR (TIS 11 TABLE 17)
VCT 750 V. 70 C PVC INSULATED AND SHEATHED FLEXIBLE B 81
CONDUCTOR (TIS 11 TABLE 9)
VCT - GRD 750 V. 70 C PVC INSULATED AND SHEATHED FLEXIBLE B 83
CONDUCTOR WITH GROUND (TIS 11 TABLE 15)
: 0-2369-1818
CONDUCTOR INSULATION
B
6
CABLE STRUCTURE
CONDUCTOR : Flexible stranded annealed copper wire,
Sizes. 0.5 mm2 up to 2.5 mm2
INSULATION : PVC - Any color
CLASSIFICATION : Maximum conductor temperature 70 C
Circuit voltage not exceeding 300 volts
TESTING VOLTAGE : 2,000 volts
REFERENCE : TIS 11-2531, Table 10
Number
of
core
Nominal
cross
sectional
Number
and
diameter
Insulation
thickness
Max.
overall
diameter
Minimum
insulation
resistance
Maximum
continuous
current rating
Cable
weight
(approx.)
Standard
length
: 0-2369-1818
area
(mm2)
0.5
of wire
(No./mm)
16/0.20
(mm)
0.8
(mm)
3.2
at 70C
(M -km)
0.0160
in free air
(Ampere)
9
(kg/km)
12
(m)
100/C
0.5 28/0.15 0.8 3.2 0.0160 9 11 100/C
0.75 24/0.20 0.8 3.4 0.0140 11 15 100/C
1 0.75 42/0.15 0.8 3.4 0.0140 11 14 100/C
1 32/0.20 0.8 3.6 0.0127 14 17 100/C
1.5 30/0.25 0.8 3.9 0.0111 18 22 100/C
2.5 50/0.25 0.8 4.8 0.0092 24 33 100/C
C : Packing in coil.
B
6
: 0-2369-1818
CONDUCTOR INSULATION
B
6
CABLE STRUCTURE
NUMBER OF CORE : 2 up to 5 cores, twisted together
CONDUCTOR : Flexible annealed copper wire,
Sizes. 0.5 mm2 up to 2.5 mm2
INSULATION : PVC
Color : Single core shall be light gray,
others shall be light gray as
base color with color tracer or
color threads laid with conductor
Black, Red, Blue
: For 5 cores shall be plus one
core Green/Yellow or Yellow/
Green color
CLASSIFICATION : Maximum conductor temperature 70 C
Circuit voltage not exceeding 300 volts
TESTING VOLTAGE : 2,000 volts
REFERENCE : TIS 11-2531, Table 10
THAI-YAZAKI TECHNICAL DATA
B 73
VTF
TIS 11-2531
TABLE 10
Number
of
core
Nominal
cross
sectional
Number
and
diameter
Insulation
thickness
Max.
overall
diameter
Minimum
insulation
resistance
Maximum
continuous
current rating
Cable
weight
(approx.)
Standard
length
: 0-2369-1818
area
(mm2)
0.5
of wire
(No./mm)
16/0.20
(mm)
0.8
(mm)
3.2
at 70C
(M -km)
0.0160
in free air
(Ampere)
7
(kg/km)
23
(m)
100/C
0.5 28/0.15 0.8 3.2 0.0160 7 23 100/C
0.75 24/0.20 0.8 3.4 0.0140 10 29 100/C
2 0.75 42/0.15 0.8 3.4 0.0140 10 29 100/C
1 32/0.20 0.8 3.6 0.0127 11 34 100/C
1.5 30/0.25 0.8 3.9 0.0111 15 45 100/C
2.5 50/0.25 0.8 4.8 0.0092 20 65 100/C
C : Packing in coil.
B
6
: 0-2369-1818
CONDUCTOR INSULATION
B
6
CABLE STRUCTURE
NUMBER OF CORE : 2 conductors
CONDUCTOR : Flexible annealed copper wire,
Sizes. 0.5 mm2 up to 2.5 mm2
INSULATION : PVC
Color : Any color with one
different color tracer on
lateral side of wire, or
color thread at one of
conductors
CLASSIFICATION : Maximum conductor temperature 70 C
Circuit voltage not exceeding 300 volts
TESTING VOLTAGE : 2,000 volts
REFERENCE : TIS 11-2531, Table 10
Number
of
core
Nominal
cross
sectional
Number
and
diameter
Insulation
thickness
Overall diameter
(mm)
Minimum Maximum Cable Standard
insulation continuous weight
resistance current rating (approx.)
length
: 0-2369-1818
area
(mm2)
0.5
of wire
(No./mm)
16/0.20
(mm)
0.8
Lower
limit
2.4x4.9
Upper
limit
3.2x6.2
at 70C in free air
(M -km) (Ampere) (kg/km)
0.0160 8 23
(m)
100/C
0.5 28/0.15 0.8 2.4x4.8 3.2x6.2 0.0160 8 23 100/C
0.75 24/0.20 0.8 2.6x5.2 3.4x6.6 0.0140 10 29 100/C
2 0.75 42/0.15 0.8 2.6x5.2 3.4x6.6 0.0140 10 29 100/C
1 32/0.20 0.8 2.8x5.6 3.6x7.0 0.0127 12 35 100/C
1.5 30/0.25 0.8 3.0x6.0 3.9x7.6 0.0111 15 46 100/C
2.5 50/0.25 0.8 3.5x7.0 4.8x9.4 0.0092 21 68 100/C
C : Packing in coil.
B
6
: 0-2369-1818
GROUND WIRE
CONDUCTOR
INSULATION
B
6
CABLE STRUCTURE
NUMBER OF CORE : 2 conductors with safety ground
CONDUCTOR : Flexible annealed copper wires,
Sizes. 1 mm2 up to 2.5 mm2
Ground conductor 1 mm2 up to 1.5 mm2
INSULATION : PVC
Color : Any color with one different color
tracer on lateral side of wire, or color
thread at one of conductors
CLASSIFICATION : Maximum conductor temperature 70 C
Circuit voltage not exceeding 300 volts
TESTING VOLTAGE : 2,000 volts
REFERENCE : TIS 11-2531, Table 16
Nominal
cross
sectional
Number Insulation Nominal Thickness Overall diameter
and thickness cross sectional of ground
diameter area of ground insulator (mm)
Minimum Maximum
insulation continuous
resistance current rating
Cable Standard
weight
(approx.)
length
area
(mm2)
1
: 0-2369-1818
of wire
(No./mm) (mm)
30/0.20 0.8
conductor
(mm2)
1
(mm)
0.6
Lower
limit
Upper
limit
2.8x8.0 3.6x9.8
at 70C in free air
(M-km) (Ampere.)
0.0127 12
(kg/km)
50
(m)
500/C
1.5 30/0.25 0.8 1 0.6 3.0x8.6 3.9x10.5 0.0111 15 60 500/C
2.5 50/0.25 0.8 1.5 0.6 3.5x9.6 4.8x12.5 0.0092 21 90 500/C
C : Packing in coil.
B
6
: 0-2369-1818
CONDUCTOR
INSULATION SHEATH
B
6
CABLE STRUCTURE
NUMBER OF CORE : 2 cores
CONDUCTOR : Flexible annealed copper wires
Sizes. 0.5 mm2 up to 35 mm2
INSULATION : PVC
Color : Light gray, Black
SHEATH : PVC
Color : Black or White
CLASSIFICATION : Maximum conductor temperature 70 C
Circuit voltage not exceeding 300 volts
TESTING VOLTAGE : 2,000 volts
REFERENCE : TIS 11-2531, Table 17
Number Nominal
of cross
core sectional
Number
and
diameter
Insulation Sheath
thickness thickness
Overall diameter
(mm)
Minimum Maximum
insulation continuous
resistance current rating
Cable Standard
weight
(approx.)
length
: 0-2369-1818
area
(mm2)
0.5
of wire
(No./mm)
16/0.20
(mm)
0.6
(mm)
0.9
Lower
limit
3.8x5.8
Upper
limit
4.7x7.2
at 70C in free air
(M -km) (Ampere)
0.0132 8
(kg/km)
38
(m)
100/C
0.5 28/0.15 0.6 0.9 3.8x5.8 4.7x7.2 0.0133 8 38 100/C
1 32/0.20 0.6 0.9 4.1x6.6 5.2x8.0 0.0104 11 50 100/C
2 1.5 30/0.25 0.6 1.2 5.0x7.6 6.2x9.4 0.0090 15 75 100/C
2.5 50/0.25 0.7 1.2 5.6x9.0 7.2x11.5 0.0083 20 110 100/C
4 56/0.30 0.8 1.2 6.4x10.0 8.0x13.0 0.0073 27 150 100/C
6 84/0.30 0.8 1.2 6.8x11.5 8.8x14.5 0.0065 36 210 100/C
10 84/0.40 0.9 1.2 8.0x13.5 10.5x17.5 0.0057 50 330 100/C
16 126/0.40 1.0 1.2 9.8x17.5 12.0x20.5 0.0047 67 460 100/C
B 25 196/0.40 1.2 1.4 12.0x21.5 14.5x25.0 0.0045 80 700 500/D
35 280/0.40 1.2 1.4 13.5x24.0 16.0x28.0 0.0038 111 950 500/D
6
TISI permitted to increase the maximum overall diameter by 5%
C : Packing in coil.
D : Packing in drum.
: 0-2369-1818
CONDUCTOR INSULATION
SHEATH
B
6
CABLE STRUCTURE
NUMBER OF CORE : Up to 4 cores
CONDUCTOR : Flexible annealed copper wire
Sizes. 0.5 mm2 up to 95 mm2 for single core
0.5 mm2 up to 35 mm2 for multi core
INSULATION : PVC
Color : Single core -Black
2 cores- Light gray, Black
3 cores- Light gray, Black and Red
4 cores- Light gray, Black, Red and Blue
SHEATH : PVC
Color : Black
CLASSIFICATION : Maximum conductor temperature 70 C
Circuit voltage not exceeding 750 volts
TESTING VOLTAGE : 2,500 volts
REFERENCE : TIS 11-2531, Table 9
Number Nominal Number Insulation Sheath Max. Minimum Maximum Cable Standard
of
core
cross
sectional
area
and
diameter
of wire
thickness thickness Overall
diameter
insulation
resistance
at 70C
continuous
current rating
in free air
weight
(approx.)
length
: 0-2369-1818
(mm2)
0.5
0.75
1
(No./mm)
16/0.20
24/0.20
32/0.20
(mm)
0.8
0.8
0.8
(mm)
1.0
1.0
1.2
(mm)
5.4
5.6
6.2
(M-km)
0.0160
0.0140
0.0127
(Ampere)
10
13
15
(kg/km)
28
32
40
(m)
100/C
100/C
100/C
1.5 30/0.25 0.8 1.2 6.6 0.0111 19 47 100/C
2.5 50/0.25 0.8 1.2 7.4 0.0092 27 60 100/C
4 56/0.30 0.9 1.4 8.6 0.0084 36 85 100/C
1 6 84/0.30 0.9 1.4 9.4 0.0071 46 120 100/C
10 80/0.40 1.1 1.8 12.0 0.0068 67 200 100/C
16 126/0.40 1.1 1.8 13.5 0.0050 88 270 100/C
25 196/0.40 1.3 2.2 16.0 0.0048 116 400 100/C
35 280/0.40 1.3 2.2 17.5 0.0041 145 550 500/D
50 399/0.40 1.5 2.6 21.0 0.0040 181 750 500/D
70 361/0.50 1.5 2.6 23.0 0.0034 226 950 500/D
95 475/0.50 1.7 3.0 26.5 0.0034 268 1,300 500/D
B 0.5 16/0.20 0.8 1.2 8.8 0.0160 9 75 100/C
0.75 24/0.20 0.8 1.2 9.2 0.0140 12 85 100/C
1 32/0.20 0.8 1.2 9.6 0.0127 14 95 100/C
6 1.5
2.5
30/0.25
50/0.25
0.8
0.8
1.4
1.4
11.0
12.5
0.0111
0.0092
18
24
120
160
100/C
100/C
2 4 56/0.30 0.9 1.6 14.5 0.0084 33 230 100/C
6 84/0.30 0.9 1.6 16.0 0.0071 42 300 100/C
10 80/0.40 1.1 1.8 20.0 0.0068 60 500 500/D
16 126/0.40 1.1 2.2 23.0 0.0050 80 700 500/D
25 196/0.40 1.3 2.4 27.5 0.0048 104 1,000 500/D
35 280/0.40 1.3 2.6 31.0 0.0041 130 1,400 500/D
0.5 16/0.20 0.8 1.2 9.2 0.0160 8 85 100/C
0.75 24/0.20 0.8 1.2 9.6 0.0140 10 100 100/C
1 32/0.20 0.8 1.4 10.5 0.0127 12 120 100/C
1.5 30/0.25 0.8 1.4 11.5 0.0111 15 140 100/C
2.5 50/0.25 0.8 1.4 13.0 0.0092 20 190 100/C
3 4 56/0.30 0.9 1.6 15.5 0.0084 27 270 100/C
6 84/0.30 0.9 1.8 17.5 0.0071 35 390 100/C
10 80/0.40 1.1 2.0 21.5 0.0068 51 650 500/D
16 126/0.40 1.1 2.4 25.0 0.0050 67 900 500/D
25 196/0.40 1.3 2.6 30.0 0.0048 87 1,300 500/D
35 280/0.40 1.3 2.8 33.5 0.0041 108 1,700 500/D
0.5 16/0.20 0.8 1.4 10.5 0.0160 7 110 100/C
0.75 24/0.20 0.8 1.4 11.0 0.0140 9 130 100/C
1 32/0.20 0.8 1.6 12.0 0.0127 11 150 100/C
1.5 30/0.25 0.8 1.6 12.5 0.0111 13 180 100/C
2.5 50/0.25 0.8 1.6 15.0 0.0092 18 240 100/C
4 4 56/0.30 0.9 1.8 17.0 0.0084 25 340 100/C
6 84/0.30 0.9 2.0 19.5 0.0071 32 500 100/C
10 80/0.40 1.1 2.2 24.0 0.0068 46 800 500/D
16 126/0.40 1.1 2.6 28.0 0.0050 60 1,100 500/D
25 196/0.40 1.3 2.8 33.0 0.0048 78 1,700 500/D
35 280.0.40 1.3 3.1 37.0 0.0041 97 2,300 500/D
TISI permitted to increase the maximum overall diameter by 5%
C : Packing in coil.
D : Packing in drum.
: 0-2369-1818GROUND WIRE
CONDUCTOR INSULATION
SHEATH B
6
CABLE STRUCTURE
NUMBER OF CORE : 2 up to 4 phase cores with 1 grounding core
CONDUCTOR : Flexible annealed copper wires
Sizes. 1 mm2 up to 35 mm2
Ground conductor 1 mm2 up to 10 mm2
INSULATION : PVC
Color : 2 cores- Light gray, Black
3 cores- Light gray, Black and Red
4 cores- Light gray, Black, Red and Blue
Ground core- Green/Yellow
SHEATH : PVC
Color : Black
CLASSIFICATION : Maximum conductor temperature 70 C
Circuit voltage not exceeding 750 volts
TESTING VOLTAGE : 2,500 volts
REFERENCE : TIS 11-2531, Table 15
Number Nominal Number Insulation Nominal Thickness Sheath Max.
of cross and
core sectional diameter
thickness cross of
sectional ground
Minimum Maximum Cable Standard
thickness overall insulation continuous weight length
diameter resistance current (approx.)
: 0-2369-1818
area of wire area of insulation
ground
conductor
at 70C rating in
free air
(mm2) (No./mm) (mm) (mm2) (mm) (mm) (mm) (M-km) (Ampere) (kg/km) (m)
1 32/0.20 0.8 1 0.6 1.2 10.5 0.0127 14 100 100/C
1.5 30/0.25 0.8 1 0.6 1.4 11.5 0.0111 18 130 100/C
2.5 50/0.25 0.8 1.5 0.6 1.4 13.0 0.0092 24 170 100/C
4 56/0.30 0.9 2.5 0.6 1.6 15.5 0.0084 33 240 100/C
2 6 84/0.30 0.9 4 0.6 1.6 17.0 0.0071 42 330 100/C
10 84/0.40 1.1 4 0.6 1.8 20.0 0.0068 60 550 500/D
16 126/0.40 1.1 6 0.6 2.2 23.0 0.0050 80 750 500/D
B 25 196/0.40 1.3 6 0.6 2.4 27.5 0.0048 104 1,100 500/D
35 280/0.40 1.3 10 0.6 2.6 31.0 0.0041 130 1,500 500/D
6
1 32/0.20 0.8 1 0.6 1.4 11.5 0.0127 12 130 100/C
1.5 30/0.25 0.8 1 0.6 1.4 12.5 0.0111 15 160 100/C
2.5 50/0.25 0.8 1.5 0.6 1.4 14.5 0.0092 20 210 100/C
4 56/0.30 0.9 2.5 0.6 1.6 17.0 0.0084 27 310 100/C
3 6 84/0.30 0.9 4 0.6 1.8 19.0 0.0071 35 440 100/C
10 84/0.40 1.1 4 0.6 2.0 23.5 0.0068 51 650 500/D
16 126/0.40 1.1 6 0.6 2.4 27.5 0.0050 67 950 500/D
25 196/0.40 1.3 6 0.6 2.6 32.5 0.0048 87 1,400 500/D
35 280/0.40 1.3 10 0.6 2.8 36.5 0.0041 108 1,800 500/D
1 32/0.20 0.8 1 0.6 1.6 13.0 0.0127 11 180 100/C
1.5 30/0.25 0.8 1 0.6 1.6 13.5 0.0111 13 210 100/C
2.5 50/0.25 0.8 1.5 0.6 1.6 16.0 0.0092 18 270 100/C
4 56/0.30 0.9 2.5 0.6 1.8 18.5 0.0084 25 400 100/C
4 6 84/0.30 0.9 4 0.6 2.0 21.0 0.0071 32 550 500/D
10 84/0.40 1.1 4 0.6 2.2 26.0 0.0068 46 900 500/D
16 126/0.40 1.1 6 0.6 2.6 30.5 0.0050 60 1,200 500/D
25 196/0.40 1.3 6 0.6 2.8 36.0 0.0048 78 1,700 500/D
35 280/0.40 1.3 10 0.6 3.1 40.5 0.0041 97 2,400 500/D
TISI permitted to increase the maximum overall diameter by 5%
C : Packing in coil.
D : Packing in drum.
: 0-2369-1818
: 0-2369-1818
CONDUCTOR INSULATION
B
7
CABLE STRUCTURE
CONDUCTOR : Flexible annealed copper wires
Sizes. 0.5 mm2 up to 95 mm2
INSULATION : PVC
Color : Any color
CLASSIFICATION : Maximum conductor temperature 60 C
Low voltage circuit
TESTING VOLTAGE : 5,000 volts
REFERENCE : TIS 118-2522 and JIS C 3406
Number
of
core
Nominal
cross
sectional
Number
and
diameter
Approx. Mean
conductor value of
diameter insulation
Approx.
overall
diameter
Maximum
conductor
resistance
Maximum
continuous
current rating
Cable
weight
(approx.)
Standard
length
: 0-2369-1818
area
(mm2)
0.5
of wire
(No./mm)
16/0.20
(mm)
0.95
thickness
(mm)
0.6
(mm)
2.2
at 20C
( -km)
37.1
in free air
(Ampere)
8
(kg/km)
9
(m)
100/C
0.5 7/0.30 0.95 0.6 2.2 37.1 8 9 100/C
0.75 24/0.20 1.15 0.6 2.4 24.7 11 11 100/C
0.85 12/0.30 1.20 0.6 2.4 22.0 11 12 100/C
1.0 32/0.20 1.30 0.6 2.6 18.5 13 14 100/C
1.25 40/0.20 1.50 0.6 2.7 14.8 15 17 100/C
1.25 18/0.30 1.50 0.6 2.7 14.7 15 17 100/C
1.5 30/0.25 1.60 0.6 2.8 12.7 16 19 100/C
2 28/0.30 1.90 0.6 3.1 9.42 20 24 100/C
2.5 50/0.25 2.10 0.7 3.5 7.60 23 30 100/C
B
1 3 44/0.30 2.30 0.7 3.7 6.00 26 37 100/C 7
4 56/0.30 2.60 0.8 4.2 4.71 31 47 100/C
5 70/0.30 3.0 0.8 4.6 3.77 36 57 100/C
6 84/0.30 3.20 0.9 5.0 3.14 40 69 100/C
8 63/0.40 3.7 0.9 5.5 2.31 48 88 100/C
10 84/0.40 4.2 1.1 6.4 1.82 58 114 100/C
16 126/0.40 5.8 1.1 8.0 1.16 75 173 100/C
25 196/0.60 7.0 1.4 9.8 0.770 98 261 100/C
35 280/0.40 8.5 1.4 11.3 0.524 124 366 100/C
50 399/0.40 10.9 1.6 14.1 0.357 163 537 500/D
70 361/0.50 12.60 2.0 16.6 0.268 200 727 500/D
95 475/0.50 14.1 2.0 18.1 0.193 248 971 500/D
C : Packing in coil.
D : Packing in drum.
Number Nominal Number Average Approx. Mean Approx.
of cross and standed of conductor value of overall
core sectional diameter conductor diameter insulation diameter
Maximum
conductor
resistance
Maximum
continuous
current rating
Cable
weight
(approx.)
Standard
length
: 0-2369-1818
area
0.5
of wire diameter
(mm2) (No./mm) (mm)
20/0.18 0.95
(mm)
thickness
1.0
(mm)
0.6
(mm)
2.1
at 20C
( -km)
36.7
in free air
(Ampere)
8
(kg/km)
8.5
(m)
100/C
0.5 7/0.32 1.00 1.0 0.6 2.1 32.7 9 9 100/C
0.75 30/0.18 1.15 1.20 0.6 2.3 24.4 11 12 100/C
0.85 11/0.32 1.25 1.20 0.6 2.4 20.8 12 13 100/C
1.25 50/0.18 1.50 1.50 0.6 2.7 14.7 15 17 100/C
1.25 16/0.32 1.50 1.50 0.6 2.7 14.3 15 17 100/C
2 26/0.32 1.90 1.90 0.6 3.1 8.81 20 26 100/C
1 3 41/0.32 2.40 2.30 0.7 3.8 5.59 27 40 100/C
5 65/0.32 3.00 3.0 0.8 4.5 3.52 37 60 100/C
B 8 50/0.45 3.70 3.7 0.9 5.4 2.32 48 90 100/C
7 15 84/0.45 5.10 5.8 1.1 7.2 1.38 67 160 100/C
20 247/0.32 6.30 7.0 1.1 8.2 0.887 88 230 100/C
30 361/0.32 7.60 8.5 1.4 10.5 0.520 122 380 500/D
40 494/0.32 8.90 10.9 1.4 11.5 0.428 139 450 500/D
50 608/0.32 9.8 12.6 1.6 13.0 0.337 177 570 500/D
60 741/0.32 10.0 14.1 1.6 13.5 0.287 199 670 500/D
F : More flexible.
C : Packing in coil.
D : Packing in drum.
: 0-2369-1818
: 0-2369-1818
CONDUCTOR
B
8
CABLE STRUCTURE
CONDUCTOR : Hard drawn copper wires, concentric
stranded conductor
Sizes 10 mm2 up to 500 mm2
Direction of outermost layer Z
REFERENCE : TIS 64-2517
Nominal
Cross
Sectional
Number
and
diameter
Approx
conductor
diameter
Maximum
conductor
resistance
Breaking
strength
Maximum
continuous
current
Cable
weight
(approx.)
Standard
lenght
area
: 0-2369-1818
(mm2)
of wire
(No./mm) (mm)
at 20C
(/km) (kgf)
rating in free
air
(Ampere) (kg/km) (m)
10 7/1.35 4.05 1.80548 438 90 9 100/D
16 7/1.70 5.10 1.13857 694 125 140 100/D
25 7/2.14 6.42 0.71851 1,076 160 230 100/D
35 7/2.52 7.56 0.51815 1,459 200 320 100/D
50 7/3.02 9.06 0.35896 2,095 250 450 100/D
50 19/1.78 8.90 0.38252 2,021 250 430 100/D
70 19/2.14 10.70 0.26466 2,921 310 600 100/D
95 19/2.52 12.60 0.19183 3,961 380 850 100/D
120 19/2.85 14.25 0.14922 5,067 440 1,100 500/D B
150 37/2.25 15.75 0.12384 6,289 510 1,300 500/D
185 37/2.52 17.64 0.09813 7,713 585 1,700 500/D
8
240 61/2.25 20.25 0.07528 10,369 700 2,200 500/D
300 61/2.52 22.68 0.06002 12,717 800 2,800 500/D
400 61/2.85 25.65 0.04692 16,266 900 3,600 500/D
500 61/3.20 28.80 0.03703 20,506 1,110 4,500 500/D
D : Packing in durm.
C
1
: 0-2369-1818
CONDUCTOR INSULATION
CABLE STRUCTURE
CONDUCTOR : Solid hard drawn aluminium wires,
Sizes 10 mm2 and 16 mm2
C INSULATION : PVC
Color : Blue
1 CLASSIFICATION : Maximum conductor temperature 70C
Circuit voltage not exceeding 750 volts
TESTING VOLTAGE : 2,500 volts
REFERENCE : TIS 293-2541, Table 1
Nominal
cross
sectional
Number
and
diameter
Insulation
thickness
Approx.
overall
diameter
Maximum
conductor
resistance
Minimum
insulation
resistance
Maximum
continuous
current
Cable
weight
(approx.)
Standard
lenght
area
(mm2) : 0-2369-1818
of wire
(/km)
at 20 C
(M-km)
rating in free
air
(Ampere) (kg/km) (m)
10 1/3.57 2.7 9.3 2.937 40 51 110 500/C
16 1/4.50 2.9 10.5 1.848 40 68 147 500/C
C : Packing in coil.
C
1
: 0-2369-1818
CONDUCTOR INSULATION
CABLE STRUCTURE
CONDUCTOR : Solid and stranded hard drawn aluminium wires,
Sizes 10 mm2 and 500 mm2
C INSULATION : PVC
Color : Black
1 CLASSIFICATION : Maximum conductor temperature 70C
Circuit voltage not exceeding 750 volts
TESTING VOLTAGE : 2,500 volts
REFERENCE : TIS 293-2541, Table 1
Nominal
cross
sectional
Number
and
diameter
Insulation
thickness
Approx.
overall
diameter
Maximum
conductor
resistance
Minimum
insulation
resistance
Maximum
continuous
current
Cable
weight
(approx.)
Standard
lenght
area
(mm2)
: 0-2369-1818
of wire
(/km)
at 20 C
(M-km)
rating in free
air
(Ampere) (kg/km) (m)
10 1/3.49 1.1 5.9 3.08 0.038 50 50 500/D
10 7/1.32 1.1 6.4 3.08 0.034 52 55 500/D
16 1/4.43 1.1 6.8 1.91 0.032 67 70 500/D
16 7/1.68 1.1 7.4 1.91 0.028 69 80 500/D
25 7/2.12 1.3 9.2 1.20 0.027 92 120 500/D
35 7/2.49 1.3 10.5 0.868 0.023 113 160 500/D
50 7/2.90 1.5 12.0 0.641 0.023 135 210 500/D
50 19/1.76 1.5 12.5 0.641 0.023 135 210 500/D
70 19/2.12 1.5 14.0 0.443 0.020 173 280 500/D
95 19/2.49 1.7 16.5 0.320 0.019 218 390 500/D
120 19/2.80 1.7 18.0 0.253 0.017 257 470 500/D
120 37/2.01 1.7 18.0 0.253 0.017 258 470 500/D
150 37/2.23 1.9 20.0 0.206 0.017 298 600 500/D
185 37/2.50 2.1 22.0 0.164 0.017 351 700 500/D
240 61/2.23 2.3 25.0 0.125 0.016 426 900 500/D
300 61/2.49 2.5 28.0 0.100 0.016 498 1,100 500/D
400 61/2.82 2.7 32.0 0.0778 0.015 594 1,400 500/D C
500 61/3.20 3.1 36.0 0.0605 0.015 708 1,900 500/D
1
C : Packing in coil.
D : Packing in drum.
: 0-2369-1818
CONDUCTOR INSULATION
CABLE STRUCTURE
CONDUCTOR : Compact stranded hard drawn aluminium wires
Sizes 10 mm2 up to 500 mm2
C INSULATION : PVC
Color : Black
1 CLASSIFICATION : Maximum conductor temperature 70C
Circuit voltage not exceeding 750 volts
TESTING VOLTAGE : 2,500 volts
REFERENCE : TIS 293-2541, Table 2
Nominal
cross
sectional
Actual Minimum
cross
sectional
number
of
Compact Insulation Approx. Maximum Breaking Maximum Cable Standard
conductor thickness overall conductor strength continuous weight
diameter diameter resistance of current (approx.)
lenght
area
(mm2)
: 0-2369-1818
area
(mm2)
stranded
(No.)
approx.
(/km) (N)
free air
(Ampere) (kg/km) (m)
10 9.64 6 3.65 1.1 6.2 3.08 1,768 51 50 500/C
16 15.55 6 4.64 1.1 7.2 1.91 2,734 68 75 500/C
25 24.75 6 5.85 1.3 8.8 1.20 4,120 91 110 300/C
35 34.21 6 6.88 1.3 9.8 0.868 5,591 111 150 300/C
50 46.32 6 8.01 1.5 11.5 0.641 7,313 133 200 200/C
70 67.03 12 9.63 1.5 13.0 0.443 10,420 167 270 100/C
95 92.79 15 11.33 1.7 15.5 0.320 14,098 210 370 100/C
120 117.37 15 12.75 1.7 16.5 0.253 18,518 248 450 100/C
150 144.15 15 14.13 1.9 18.5 0.206 22,457 287 550 500/D
185 181.06 30 15.83 2.1 21.0 0.164 28,974 337 700 500/D
240 237.55 30 18.28 2.3 24.0 0.125 37,506 410 900 500/D
300 296.94 30 20.43 2.5 26.0 0.100 45,642 479 1,100 500/D
400 381.67 53 23.17 2.7 29.0 0.0778 56,992 571 1,400 500/D
500 490.81 53 26.27 3.1 33.0 0.0605 72,195 680 1,800 500/D
C : Packing in coil.
D : Packing in drum.
C
1
: 0-2369-1818
: 0-2369-1818
INSULATION
EXTRUDED CONDUCTOR SHIELD
ALUMINIUM CONDUCTOR
CABLE STRUCTURE
NUMBER OF CORE : Single Core
CONDUCTOR : Compacted round stranded hard drawn
Aluminium conductor, C
Sizes 35 mm2 up to 185 mm2
INSULATION : Cross-linked polyethylene (XLPE) 2
Color : Black
CLASSIFICATION : Maximum conductor temperature 90C
Circuit voltage not exceeding 24,000 volts
TESTING VOLTAGE : 11,000 volts
REFERENCE : ICEA S-66-524
Number Nominal Number Diameter Insulation Approx. Maximum Minimum Maximum Breaking Cable Standard
of cross of of thickness Overall conductor insulation continuous Strength weight lenght
: 0-2369-1818
core sectional stranded conductor diameter resistance resistance current (approx.)
area approx.
at 20 C at 15.6 C rating in
free air
(mm )
2
(No.) (mm) (mm) (mm) (/km) (M-km) (Ampere) (N) (kg/km) (m)
35 6 7.05 1.8 12.0 0.868 900 140 5,591 170 1,000/D
50 6 8.11 2.2 14.0 0.641 880 170 7,313 220 1,000/D
70 12 9.73 2.1 15.0 0.443 800 215 10,420 290 1,000/D
1 95 15 11.43 2.5 18.0 0.320 750 270 14,098 400 1,000/D
120 15 13.05 2.6 19.5 0.253 700 310 18,518 490 1,000/D
150 15 14.37 2.6 21.0 0.206 650 355 22,457 550 1,000/D
185 30 16.08 2.55 23.0 0.164 600 410 28,974 700 1,000/D
D : Packing in drum.
C
2
: 0-2369-1818
CABLE STRUCTURE
NUMBER OF CORE : Single Core
CONDUCTOR : Compacted round stranded hard drawn
aluminium wires, C
Sizes 35 mm2 up to 185 mm2
INSULATION : Cross-linked polyethylene (XLPE) 2
Color : Black
CLASSIFICATION : Maximum conductor temperature 90C
Circuit voltage not exceeding 33,000 volts
TESTING VOLTAGE : 17,000 volts
REFERENCE : ICEA S-66-524
Number Nominal Number Diameter Insulation Approx. Maximum Minimum Maximum Breaking Cable Standard
of cross of of thickness overall conductor insulation continuous strength weight lenght
: 0-2369-1818
core sectional stranded conductor diameter resistance resistance current (approx.)
area approx.
at 20 C at 15.6 C rating in
free air
(mm )
2
(No.) (mm) (mm) (mm) (/km) (M-km) (Ampere) (N) (kg/km) (m)
35 7 7.1 3.0 14.5 0.868 1,350 145 5,591 220 1,000/D
50 7 8.5 3.2 16.5 0.641 1,300 175 7,313 280 1,000/D
70 7 9.9 3.2 18.0 0.443 1,200 220 10,420 350 1,000/D
1 95 7 11.6 3.5 20.0 0.320 1,100 270 14,098 460 1,000/D
120 19 13.1 3.6 22.0 0.253 1,000 315 18,518 550 1,000/D
150 19 14.4 3.6 23.0 0.206 950 360 22,457 650 1,000/D
185 34 16.1 3.9 26.0 0.164 900 415 28,974 800 1,000/D
D : Packing in drum.
C
2
: 0-2369-1818
INSULATION
ALUMINIUM CONDUCTOR SHEATH
CABLE STRUCTURE
NUMBER OF CORE : Single Core
CONDUCTOR : Compacted round stranded hard drawn
Aluminium conductors, C
Sizes 35 mm2 up to 240 mm2
INSULATION : Cross-linked polyethylene (XLPE) 2
Color : Natural
SHEATH : Cross-linked polyethylene (XLPE)
Color : Black
CLASSIFICATION : Maximum conductor temperature 90C
Circuit voltage not exceeding 15,000 volts
TESTING VOLTAGE : 27,000 volts
REFERENCE : ICEA S-66-524
Number Nominal Number Diameter Insulation Sheath Approx. Maximum Minimum Maximum Breaking Cable Standard
of cross of of thickness thickness overall conductor insulation continuous strength weight lenght
: 0-2369-1818
core sectional stranded conductor diameter resistance resistance current (approx.)
area approx.
at 20 C at 15.6 C rating in
free air
(mm )2
(No.) (mm) (mm) (mm) (mm) (/km) (M-km) (Ampere) (N) (kg/km) (m)
35 7 7.1 1.91 1.91 16.5 0.868 1,750 150 5,591 260 500/D
50 7 8.5 1.91 1.91 18.0 0.641 1,550 180 7,313 320 500/D
70 7 9.9 1.91 1.91 19.5 0.443 1,400 225 10,420 390 500/D
1 95 7 11.6 1.91 1.91 21.0 0.320 1,250 275 14,098 490 500/D
120 19 13.1 1.91 1.91 23.0 0.253 1,150 315 18,518 600 500/D
150 19 14.4 1.91 1.91 24.0 0.206 1,050 360 22,457 650 500/D
185 34 16.1 1.91 1.91 26.0 0.164 980 415 28,974 800 500/D
240 34 18.6 1.91 1.91 28.0 0.125 850 490 37,506 1,000 500/D
D : Packing in drum.
C
2
: 0-2369-1818
INSULATION
ALUMINIUM CONDUCTOR
SHEATH
EXTRUDED CONDUCTOR SHIELD
CABLE STRUCTURE
NUMBER OF CORE : Single Core
CONDUCTOR : Compacted round stranded hard drawn
Aluminium conductors, C
Sizes 35 mm2 up to 240 mm2
INSULATION : Cross-linked polyethylene (XLPE) 2
Color : Natural
SHEATH : Cross-linked polyethylene (XLPE)
Color : Black
CLASSIFICATION : Maximum conductor temperature 90C
Circuit voltage not exceeding 25,000 volts
TESTING VOLTAGE : 38,000 volts
REFERENCE : ICEA S-66-524
Number Nominal Number Diameter Insulation Sheath Approx. Maximum Minimum Maximum Breaking Cable Standard
of cross of of thickness thickness overall conductor insulation continuous strength weight lenght
: 0-2369-1818
core sectional stranded conductor diameter resistance resistance current (approx.)
area approx.
at 20 C at 15.6 C rating in
free air
(mm )2
(mm) (mm) (mm) (mm) (/Km) (M-Km) (Ampere) (N) (Kg/Km) (m)
35 6 7.05 3.175 3.175 22 0.868 2,500 150 5,720 400 500/D
50 6 8.11 3.175 3.175 23 0.641 2,250 180 7,890 460 500/D
70 12 9.73 3.175 3.175 25 0.443 2,050 225 10,530 550 500/D
1 95 15 11.43 3.175 3.175 26 0.320 1,850 275 14,380 650 500/D
120 15 13.05 3.175 3.175 28 0.253 1,700 315 19,110 750 500/D
150 15 14.37 3.175 3.175 29 0.206 1,600 360 22,560 850 500/D
185 30 16.08 3.175 3.175 31 0.164 1,450 415 29,600 1,000 500/D
240 30 18.57 3.175 3.175 33 0.125 1,300 490 38,220 1,200 500/D
D : Packing in drum.
C
2
: 0-2369-1818
INSULATION SHEATH
EXTRUDED CONDUCTOR SHIELD
ALUMINIUM CONDUCTOR
CABLE STRUCTURE
NUMBER OF CORE : Single Core
CONDUCTOR : Compacted round stranded hard drawn
Aluminium conductors, C
Sizes 35 mm2 up to 240 mm2
INSULATION : Cross-linked polyethylene (XLPE) 2
Color : Natural
SHEATH : Cross-linked polyethylene (XLPE)
Color : Black
CLASSIFICATION : Maximum conductor temperature 90C
Circuit voltage not exceeding 35,000 volts
TESTING VOLTAGE : 49,000 volts
REFERENCE : ICEA S-66-524
Number Nominal Number Diameter Insulation Sheath Approx. Maximum Minimum Maximum Breaking Cable Standard
of cross of of thickness thickness overall conductor insulation continuous strength weight lenght
: 0-2369-1818
core sectional stranded conductor diameter resistance resistance current (approx.)
area approx.
at 20 C at 15.6 C rating in
free air
(mm )
2
(No.) (mm) (mm) (mm) (mm) (/km) (M-km) (Ampere) (N) (kg/km) (m)
50 6 8.5 4.445 3.175 26 0.641 2,500 180 7,890 550 500/D
70 12 9.9 4.445 3.175 27 0.443 2,300 225 10,530 650 500/D
95 15 11.6 4.445 3.175 29 0.320 2,100 275 14,380 750 500/D
1 120 15 13.1 4.445 3.175 31 0.253 1,950 315 19,110 900 500/D
150 15 14.4 4.445 3.175 32 0.206 1,800 360 22,560 1,000 500/D
185 30 16.1 4.445 3.175 34 0.164 1,690 415 29,600 1,100 500/D
240 30 18.6 4.445 3.175 36 0.125 1,500 490 38,220 1,400 500/D
D : Packing in drum.
C
2
: 0-2369-1818
C
3
: 0-2369-1818
CABLE STRUCTURE
CONDUCTOR : Concentric stranded hard drawn
aluminium wires,
C sizes 16 mm2 up to 1,000 mm2
STANDING DIRECTION : Z - Stranding
3 REFERENCE : TIS 85-2548
Nominal
cross
sectional
Number
and approx.
diameter of
Approx.
overall
conductor
Maximum
conductor
resistance
Breaking
strength
Maximum
continuous
current
Cable
weight
(approx.)
Standard
lenght
: 0-2369-1818
area
(mm2)
wire
(No./mm)
diameter
(mm)
at 20C
(/km) (kgf)
rating
in free air
(Ampere) (kg/km) (m)
16 7/1.70 5.10 1.802 290 110 44 3000/D
25 7/2.14 6.42 1.138 440 145 70 3000/D
35 7/2.52 7.56 0.820 585 180 95 3000/D
50 7/3.02 9.06 0.571 805 225 140 2500/D
50 19/1.83 9.15 0.5757 890 225 140 2500/D
70 19/2.15 10.75 0.4171 1,205 270 190 2500/D
95 19/2.52 12.60 0.3036 1,585 340 260 2500/D
120 19/2.85 14.25 0.2374 1,980 390 330 2000/D
150 37/2.25 15.75 0.1960 2,570 455 400 2000/D
185 37/2.52 17.64 0.1563 3,085 550 500 2000/D
240 61/2.25 20.25 0.1192 4,015 625 650 1500/D
300 91/2.52 22.68 0.0950 4,820 710 850 1500/D
400 61/2.85 25.65 0.0743 6,025 855 1,100 1000/D
500 61/3.25 29.25 0.0571 7,695 990 1,400 1000/D
625 91/2.96 32.56 0.0463 9,694 1,140 1,700 500/D
800 91/3.35 36.85 0.0361 12,055 1,340 2,200 500/D
1000 91/3.74 41.14 0.0290 14,845 1,540 2,800 500/D
C
D : Packing in drum.
3
: 0-2369-1818
CABLE STRUCTURE
CONDUCTOR : Hard drawn aluminium wire
Sizes 16 mm2 up to 680 mm2
C STANDING DIRECTION : Z - Stranding
STEEL CORE : Galvanized steel (Zinc coated), solid and
3 concentric stranded, sizes 2.5 mm2 up to 85 mm2
REFERENCE : TIS 85-2548
Nominal
cross
sectional
ALUMINIUM
Number Cross
and sectional
STEEL WIRE Approx. Maximum Breaking Maximum Cable Standard
Number Cross overall conductor strength continuous weight lenght
and sectional conductor resistance current (approx.)
: 0-2369-1818
area approx. area approx. area diameter at 20 C rating in
diameter diameter free air
of wire of wire
(mm2) (No./mm) (mm2) (No./mm) (mm2) (mm) (/km) (kgf) (Ampere) (kg/km) (m)
16/2.5 6/1.80 15.3 1/1.80 2.54 5.40 1.880 592 90 60 4,000/D
25/4 6/2.25 23.9 1/2.25 3.98 6.75 1.203 916 125 95 4,000/D
35/6 6/2.70 34.4 1/2.70 5.73 8.10 0.8353 1,265 145 140 3,000/D
50/8 6/3.20 48.3 1/3.20 8.04 9.60 0.5947 1,716 170 200 3,000/D
50/30 12/2.33 51.2 7/2.33 29.85 11.50 0.5644 4,380 170 380 3,000/D
70/12 26/1.85 69.9 7/1.44 11.40 11.50 0.4131 2,676 290 280 3,000/D
95/15 26/2.15 94.4 7/1.67 15.33 13.50 0.3058 3,565 350 380 3,000/D
95/55 12/3.20 96.5 7/3.20 56.30 16.00 0.2993 7,965 350 700 3,000/D
120/20 26/2.44 121.6 7/1.90 19.85 15.50 0.2375 4,555 410 490 2,000/D
120/70 12/3.60 122.1 7/3.60 71.25 18.00 0.2365 10,034 410 900 2,000/D
125/30 30/2.33 127.9 7/2.33 29.85 16.00 0.2259 5,759 425 600 2,000/D
150/25 26/2.70 148.9 7/2.10 24.25 17.00 0.1939 5,513 470 600 2,000/D
170/40 30/2.70 171.8 7/2.70 40.08 18.50 0.1683 7,675 520 800 2,000/D
185/30 26/3.00 183.8 7/2.33 29.85 18.50 0.1571 6,618 535 750 2,000/D
210/35 26/3.20 209.1 7/2.49 34.09 20.00 0.1381 7,489 590 850 1,500/D
210/50 30/3.00 212.1 7/3.00 49.48 21.00 0.1363 9,390 610 1,000 1,500/D
230/10 24/3.50 230.9 7/2.33 29.85 21.00 0.1250 7,313 630 900 1,500/D C
240/40 26/3.45 243.1 7/2.68 39.49 21.00 0.1188 8,640 645 1,000 1,500/D
265/35 24/3.74 263.7 7/2.49 34.10 22.00 0.1095 8,307 680 1,000 1,000/D 3
300/50 26/3.86 304.3 7/3.00 49.50 24.00 0.0949 10,702 740 1,200 1,000/D
305/40 54/2.68 304.6 7/2.68 39.50 24.00 0.0949 9,942 740 1,200 1,000/D
380/50 54/3.00 381.7 7/3.00 49.50 27.00 0.0758 12,312 840 1,500 1,000/D
435/55 54/3.20 434.3 7/3.20 56.30 28.00 0.0666 13,673 900 1,700 1,000/D
490/65 54/3.40 490.3 7/3.40 63.60 30.00 0.0590 15,343 960 1,900 1,000/D
550/70 54/3.60 549.7 7/3.60 71.30 32.00 0.0526 17,096 1,020 2,100 500/D
680/85 54/4.00 678.6 19/2.40 86.00 36.00 0.0426 12,040 1,150 2,600 500/D
D : Packing in drum.
: 0-2369-1818
: 0-2369-1818
SCOPE :
This specification covers Lead Free PVC plastic electrical insulation
tape to be used in electrical service at temperature 0 ~80 C.
The tape shall be used for insulation of jointed splices of cables and
wires. The tape must have good insulation properties, heat, weather, flame
resistance, and lead free materials for environment, suitable for tropical country.
STANDARD :
The Lead Free PVC plastic electrical insulation tape shall be
manufactured and tested in accordance with TIS 386-2531:
D Dimension
1) Thickness (mm) 0.125,0.18 0.025
2) Width (mm) 19 1.0
3) Length (m) 10 + 1.0
-0
at 27 2 Cand 93 2% relative humidity
2) Penetration at elevated temperature
(W)
( C)
1011
50
: 0-2369-1818
3) Flammability
4) Thermal endurance
non-ignitable or
self-extinguishing
no-crack
5) Tensile strength (N/10 mm width/mm thick.) > 150
6) Adhesion to steel (N/10 mm width/mm thick.) > 1.8
7) Adhesion to backing (N/10 mm width/mm thick.) > 1.8
8) Shear adhesion after immersion in water (N) > 18.0
9) Electric strength
- after 24 hour at 27 2 C
and 65 5% relative humidity (kV/mm) > 40
- after 24 hour at 27 2 C
and 93 2% relative humidity (kV/mm) > 35
PACKING :
The Lead Free PVC plastic electrical insulation tape shall be packing in
paper core Cellophane and shrinkage wrapped.
1) Dimension of each roll : diameter (cm) 5.8
Width (cm) 1.9
2) Weight of each roll (approx.) : Net (kg) 0.036
Gross (kg) 0.037
3) Number of roll in each package (Rolls) 10
4) Number of package in one case (Package) 10
5) Dimension of each case : WxLxH (cm) 12.5x30x19.5
6) Gross weight of each case (approx.) (kg) 4 D