Scribd
Upload
22 views

College Studies: Laboratory Safety Rules

The document outlines 7 safety rules for Drexel University's Goodwin College of Professional Studies Engineering Technology laboratories. The rules require that horseplay be avoided, equipment only be operated with permission, safety glasses and appropriate clothing be worn for machinery work, jewelry be removed, clean-up be done by the experimenter, and switches/valves not be operated until all are clear.

Uploaded by

bmyertekin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
22 views

College Studies: Laboratory Safety Rules

The document outlines 7 safety rules for Drexel University's Goodwin College of Professional Studies Engineering Technology laboratories. The rules require that horseplay be avoided, equipment only be operated with permission, safety glasses and appropriate clothing be worn for machinery work, jewelry be removed, clean-up be done by the experimenter, and switches/valves not be operated until all are clear.

Uploaded by

bmyertekin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Drexel University

Goodwin College of Professional Studies

Engineering Technology

LABORATORY SAFETY RULES

1. No horseplay! -
2. Equipment is not to be operated without permission if in doubt, ask.

3. While working with machinery and test benches:


a. Safety glasses shall be wom (Hydraulic bench only
b. Long pants shall be wom
c. Long hair and loose sleeves shall be restrained
d. Neckties and scarves shall be removed (or shall be tear-away types)
e. Shoes shall cover the toes and have full sides
f. Rings, wrist watches. and loose necklaces shall be removed.

4. All clothing should be durable and hard wearing and expected to


become dirty.

5. aeanup is the responsibility of the experimenter. If the equipment is


not clean, don't start it. When done, if it is not clean, don't leave it.

6. Safety and protective devices are not to be tampered with nor


removed.

7. Check that everyone is clear before closing any switch or opening any
valve.

You might also like