GL200 Manager Tool User Guide V203 Decrypted.100130848

GSM/GPRS/GPS Tracker GL200
Manage Tool User Guide

TRACGL200MT002
Revision: 2.03
[email protected]
GL200 Manage Tool User Guide
Document Title GL200 Manage Tool User Guide
Version 2.03
Date 2013-05-02
Status Release
Document Control ID TRACGL200MT002
General Notes
Queclink offers this information as a service to its customers, to support application and
k
engineering efforts that use the products designed by Queclink. The information provided is
n
based upon requirements specifically provided to Queclink by the customers. Queclink has
l i
not undertaken any independent search for additional relevant information, including any
l
information that may be in the customers possession. Furthermore, system validation of this
c a
product designed by Queclink within a larger electronic system remains the responsibility of
i
the customer or the customers system integrator. All specifications supplied herein are
e t
subject to change.
u n
Copyright
Q fide
This document contains proprietary technical information which is the property of Queclink
Limited., copying of this document and giving it to others and the using or communication of
the contents thereof, are forbidden without express authority. Offenders are liable to the
payment of damages. All rights reserved in the event of grant of a patent or the registration of
a utility model or design. All specification supplied herein are subject to change without
n
notice at any time.
o
Copyright Queclink Wireless Solutions Co., Ltd. 2011
C
TRACGL200MT002 -1-
Contents
Contents ............................................................................................................................................ 2
1. Revision history ............................................................................................................................ 4
2. GL200 Manage Tool Interface ...................................................................................................... 5
2.1. System Requirements .......................................................................................................... 5
2.2. COM Setting ....................................................................................................................... 6
2.3. Quick Setting Wizard .......................................................................................................... 6
2.4. Professional Setting Windows ............................................................................................. 7
2.4.1 Title Bar ...................................................................................................................... 7
k
2.4.2 Menus ......................................................................................................................... 7
n
2.4.3 Toolbar...................................................................................................................... 10
i
2.4.4 Status Bar.................................................................................................................. 11
l l
2.4.5 Command Browser and Command Operation Space ............................................... 11
c
2.5. Operation Result Interface ................................................................................................ 13
ia
2.5.1 Operation Successfully Interface .............................................................................. 13
e t
2.5.2 Operation Failed Interface ........................................................................................ 13
3. Operation Instruction .................................................................................................................. 15
u n
3.1. Device Configuration with Quick Setting Wizard............................................................. 15
3.1.1 Welcome to Quick Setting Wizard............................................................................ 15
Q fide
3.1.2 GPRS Network Setting ............................................................................................. 15
3.1.3 Main Server Setting .................................................................................................. 16
3.1.4 Fixed Time Report Setting........................................................................................ 17
3.1.5 Send Command to Device ........................................................................................ 18
n
3.2. Device Configuration in Professional Setting Mode ......................................................... 20
3.2.1 Set the parameters of Bearer Setting Information .................................................... 20
o
3.2.2 Set the parameters of Backend Server Register Information .................................... 21
3.2.3 Set the parameters of Quick Start Setting ................................................................. 22
C
3.2.4 Set the parameters of Global Configuration ............................................................. 23
3.2.5 Set the parameters of Auto-Unlock PIN ................................................................... 24
3.2.6 Set the parameters of Protocol Watchdog ................................................................. 24
3.2.7 Set the parameters of Time Adjustment .................................................................... 25
3.2.8 Set the parameters of Non Movement Detection ...................................................... 26
3.2.9 Set the parameters of Function Key Setting ............................................................. 27
3.2.10 Set the parameters of Outside Working Hours ....................................................... 28
3.2.11 Set the parameters of Fixed Report Information..................................................... 29
3.2.12 Set the parameters of Geo-Fence Information ........................................................ 30
3.2.13 Set the parameters of Speed Alarm......................................................................... 31
3.2.14 Set the parameters of Digital Output Port Settings................................................. 31
3.2.15 Set the parameters of Digital Input Port Setting ..................................................... 32
3.2.16 Set the parameters of Real Time Operation ............................................................ 33
3.2.17 Set the parameters of Transparent Data Transmission ............................................ 33
3.2.18 Set the parameters of White Call List Configuration ............................................. 34
TRACGL200MT002 -2-
3.2.19 Set the parameters of Google link SMS configuration ........................................... 35

3.2.20 Set the parameters of Network Select..................................................................... 36
3.2.21 Set the parameters of Store Command String ......................................................... 37
3.2.22 Set the parameters of User Defined Function ......................................................... 38
3.2.23 Set the parameters of Safe Flight Manager............................................................. 39
3.3. Read/Save All Configuration............................................................................................. 40
3.4. Load/Execute All Configuration ....................................................................................... 41
i n k
cl ia l
u e n t
Q fide
o n
C
TRACGL200MT002 -3-
1. Revision history
Revision Date Author Description of change

2.00 2011-7-20 Marry ma Instruction of the Manage Tool V3.0 which apply
to software version GL200R00A09V05M32_SST
and GL200R00A09V06M128_NMX
2.01 2011-08-16 Marry ma Add chapter 2.1 to define system requirements.
2.02 2011-10-26 Elkan Du Instruction of the Manage Tool V3.2 which apply
k
to software version GL200R00A10V05M32_SST
and GL200R00A10V02M128_NMX
i n
2.03 2013-05-02 Miranda 1. Add chapter 3.2.10, 3.2.20, 3.2,21, 3.2.22 and
l l
Wang 3.2.23;
2. Instruction of the Manage Tool V3.8 which
c a
apply to software version
e i
GL200R00A17V11M128_NMX
u n t
Q fide
o n
C
TRACGL200MT002 -4-
2. GL200 Manage Tool Interface
GL200 manage tool is PC software which can be used to configure GL200 through
Data_Cable_M. It is easy for the backend server developers to configure GL200 with manage tool,
which has friendly user interface. The correct command messages sent to GL200 will be displayed
on the manage tool. (These messages can also be sent by SMS or GPRS ).
The administrators can also use the manage tool to configure GL200 before selling. But it is
strongly recommended to establish a backend server and implement the way to control GL200 by
k
SMS or GPRS. Please refer to GL200 @Track Air Interface Protocol for detail.
i n
Before using the manage tools please find PL2303_Prolific_DriverInstaller_v1417.zip in
l l
develop suit and install the driver for PL2303. After that a new COM port can be found in the PC
c
system, and then please follow the steps as below:
ia
1. Power on GL200.
e t
2. Connect GL200 to PC with Data_Cable_M.
3. Run Queclink GL200 Manage Tool Vx.xx.exe.
u
Q fide n
2.1. System Requirements
In order for this manager tool to run on your computer, you must use it in below operating system:
Windows 98SE;
n
Windows ME Windows 2000 SP4;

o
Windows XP SP2 and above (32 & 64 bit);
Windows Server 2003 (32 & 64 bit);
Windows Server 2008 (32 & 64 bit);
C
Windows Vista (32 & 64 bit);
Windows 7 (32 & 64 bit);
Supported System Environments:

Microsoft .NET Framework 2.0 or higher
TRACGL200MT002 -5-
2.2. COM Setting
i n k
Select the COM port, input the password gl200, and the main window will display.
cl a l
2.3. Quick Setting Wizard
e t i
The quick setting wizard gives a basic setting for device. If you want use more functions of
u n
GL200, please change to enter professional setting mode.
Q fide
Before you enter quick setting wizard, you must make sure the COM connection is OK.
Please refer chapter 3.1 for the detail of setting with quick setting wizard.
o n
C
TRACGL200MT002 -6-
2.4. Professional Setting Windows
Menus
Toolbar
Command
Browser
n k
Command
l i l
Operation
Space
e c t ia
u n
Title Bar
Q fide
Status Bar
2.4.1 Title Bar
n
Title Bar indicates current operational command title.
o
2.4.2 Menus
C
It include Start, Tool, Help menu in menus.
2.4.2.1 Start Menu
Start menu include COM Settings.
[COM Setting]: It is used to set the COM information and password Setting details, please refer
to chapter 2.2
2.4.2.2 Tool Menu
Tool menu include Quick Setting Wizard, Operation Log, Options setting.
TRACGL200MT002 -7-
[Quick Setting Wizard]: It is used to open quick setting wizard directly. Please refer to chapter
3.1 for details.
[Operation Log]: It is used to display/hidden the operation log.
i n k
cl ia l
u e n t
Operation
Log
Q fide
[Options]: It is used to set the basic setting of manage tool.
n
Basic Options include startup setting options and log save option.
Co
TRACGL200MT002 -8-
Advanced Options include COM settings and other settings.

COM Settings is used to set enable/disable slowclock control. It is recommended using default
setting for these settings.
i n k
cl ia l
u e n t
Q fide
2.4.2.3 Help Menu
Help menu include About and Diagnosis.
[About]: Select About. Then the following pop up window will display.
o n
C
Tool Version indicates the version of this manage tool.
TRACGL200MT002 -9-
Support Version indicates the firmware which this manage tool used for.
Unit Version indicates the firmware which connects to the PC. It is recommended using the
same version of support version. If it is different between support version and device version, the
new character of device can not be used in this tool.
Device IMEI indicates the IMEI which connects to the PC.
[Diagnosis]: Select Diagnosis. Then the following pop up window will display.
i n k
cl ia l
u e n t
Q fide
This function is only for technology diagnosis when the device report data abnormally, please
n
ignore it when it works normally.
o
2.4.3 Toolbar
C
It include COM Setting, Operation Log, Quick Setting Wizard, Real All Configuration,
Execute All Configuration , Save All Configuration, Connect/Disconnect to COM.
[COM Setting]: It is used to set the COM information and password. Setting details please refer
to chapter 2.1.
[Operation Log]: It is used to display/hidden operation log.
[Quick Setting Wizard]: It is used to open quick setting wizard directly. Please refer to chapter
3.1 for details.
[Read All Configuration]: It is used to display/hidden operation log.
TRACGL200MT002 - 10 -
Read From Device: It is used to read all configuration from device which connects to PC.
Load Configuration From File: It is used to load configuration file to the manage tool.
[Send All Configuration]: It is used to execute all configurations in Command Operation Space
except GTRTO.
[Save All Configuration]: It is used to save all configurations in Command Operation Space to
k
file.
n
[Connect/Disconnect to COM]: It is used to Connect/Disconnect to COM manually.
cl i l
2.4.4 Status Bar
u e t ia
n
There is system status and current status in status bar.
Q fide
[System Status]: It indicates the count of commands which are waiting and executing to set.
[Current Status]: It indicates current COM status, IMEI, protocol version and software version
which read from device.
o n
2.4.5 Command Browser and Command Operation Space
C
This area is mainly read and set parameters of device
2.4.5.1 Command Brower

Command Brower separates all @track protocol command to several parts. Click Function in
command Brower, reference parameters of this command will be shown in command operation
space.
Command Brower Function Description Relative Command

Bearer Setting Information GTBSI
Server Connection Backend Server Register Information GTSRI
Quick Start Settings GTQSS
Global Configuration GTCFG
Device Configuration Auto-Unlock PIN GTPIN
Software Protocol Watchdog GTDOG
TRACGL200MT002 - 11 -
Time Adjustment GTTMA

Non Movement Detection GTNMD
Function Key Setting GTFKS
Outside Working Hours GTOWH
Position Related Report Fixed Position Report GTFRI
Geo-Fence Configuration GTGEO
Alarm Setting
Speed Alarm GTSPD
Digital Output Port Settings GTOUT
IO Application
Digital Input Settings GTDIS
Real Time Operation GTRTO
Transparent Data Transmission GTDTA
k
White Call List Configuration GTWLT
Google Link SMS Configuration GTGLM
n
Other Settings
i
Netwoek Select GTNTS
l l
Store Command String GTCMD
c
User Defined Function GTUDF
ia
Safe Flight Manager GTSFM
u e n t
2.4.5.2 Command Operation Space
Command
Q fide
Description
o n
Parameters
Area
Command
C
Display
[Command Description]: There is a short description for reference command.
[Parameters Area]: Set/Read parameters of this command in this area.
TRACGL200MT002 - 12 -
[Command Display]: Command with parameters in parameters area display in this area.
[Read]: Click this button to read this command from device.
[Send]: Click this button to send this command to device.
2.5. Operation Result Interface
2.5.1 Operation Successfully Interface
k
Command read OK.
cl i n l
u e t ia
Q fide
Command send OK.
n
o n
C
2.5.2 Operation Failed Interface
There should be COM port connection problem if the fail reason is timeout.
There should be COM port is occupied. Please close all other COM-related applications.
TRACGL200MT002 - 13 -
Please change to correct device password if Password Error.
i n k
cl ia l
u e n t
There are some issues with this com, please check your com wire or port.
Q fide
o n
C
TRACGL200MT002 - 14 -
3. Operation Instruction
3.1. Device Configuration with Quick Setting Wizard
The manage tool is developed based on the @Track Air Interface Protocol. Please refer to GL200
@Track Air Interface Protocol for detail.
The quick setting wizard gives a basic setting for device. If you want use more functions of
k
GL200, please change to professional setting mode.
i n
3.1.1 Welcome to Quick Setting Wizard
l l
Click Quick Setting Wizard in toolbar, open quick setting wizard. If the Result in this window
c a
is OK, click Next. If the Result is not OK, please check the COM port connection till the
e t i
result is OK.
u
Q fide n
o n
C
Welcome to Quick Setting Wizard
3.1.2 GPRS Network Setting
Step_1: Set APN, APN user name and password in this window. The meaning of these parameters,
TRACGL200MT002 - 15 -
please refer to the GL200 @Track Air Interface Protocol for detail.
Step_2: Then click Next.
Step_1
i n k
cl ia l
Step_2
u e n t
Q fide
3.1.3 Main Server Setting
Step_1: Set report mode, main server, main server port, and SMS gateway in this window. The
n
meaning of these parameters, please refer to the GL200 @Track Air Interface Protocol for detail.
o
Step_2: Click Check if main backend server is available to check if main server IP and port is
C
valid in network. If the result is ERROR, please check the server connection. You can not get
report from server if the server connection has problem.
Step_3: Click Next.
TRACGL200MT002 - 16 -
Step_1
Step_2
i n k
cl ia l
e t
Step_3
u n
3.1.4 Fixed Time Report Setting
Q fide
Step_1: Set check interval, send interval, discard no fix in this window. The meaning of these
parameters, please refer to the GL200 @Track Air Interface Protocol for detail.
Step_2: Click Next.
o n
C
TRACGL200MT002 - 17 -
Step_1
i n k
cl ia l
u e n t
Step_2
Q fide
3.1.5 Send Command to Device
Step_1: Click Send Command. Command GTBSI, GTSRI, and GTFRI will send to device.
n
Step_2: If the settings download successfully, the result return OK. Click OK to exit the quick
o
setting wizard.
C
TRACGL200MT002 - 18 -
i n k
cl ia l
u e n t
Step_1
Q fide
o n
Step_2
C
TRACGL200MT002 - 19 -
3.2. Device Configuration in Professional Setting Mode
The manage tool is developed based on the @Track Air Interface Protocol. Please refer to GL200
@Track Air Interface Protocol for detail.
Following is a general procedure to configure GL200 with manage tool.
3.2.1 Set the parameters of Bearer Setting Information
Step_1
i n k
l l
Step_4
e c t ia
u
Step_2
Q fide n
Step_3
Step_5
n
Step_1: Select Bearer Setting Information, after that the parameters of GTBSI show in
Command Operation Space.
o
Step_2: The command message which shall be sent to GL200 will be generated based on input
C
and displayed here. Please note this command message can also be sent to GL200
through SMS or GPRS.
Step_3: It is recommended to read the parameters from GL200 and edit based on them.
Step_4: Set APN parameters. Please refer to GL200 @Track Air Interface Protocol for the
meaning of each parameter.
Step_5: Click the Send button; download the parameters of GTBSI to GL200.
TRACGL200MT002 - 20 -
3.2.2 Set the parameters of Backend Server Register Information
Step_1
Step_4
Step_2
k
Step_3
i n
Step_5
cl a l
Step_1: Select Backend Server Register Information, after that the parameters of GTSRI show
e i
in Command Operation Space.
u n t
Q fide
Step_3: It is recommended to read the parameters from GL200 and edit based on them
Step_4: Set Backend Server Register Information parameters. Please refer to GL200 @Track Air
n
Interface Protocol for the meaning of each parameter.
o
Step_5: Click the Send button; download the parameters of GTSRI to GL200.
C
TRACGL200MT002 - 21 -
3.2.3 Set the parameters of Quick Start Setting
Step_1
Step_4
k
Step_3
cl i n l
Step 5
a
Step_2
u e n t i
Step_1: Select Quick Start Settings, after that the parameters of GTQSS show in Command
Q fide
Operation Space.
o n
C
Step_4: Set the GPRS and backend server information parameters. Please refer to GL200
@Track Air Interface Protocol for the meaning of each parameter.
Step_5: Click the Send button; download the parameters of GTQSS to GL200.
TRACGL200MT002 - 22 -
3.2.4 Set the parameters of Global Configuration
Step_1
Step_4
k
Step_3
l i n
Step_2
l
Step_5
e c t ia
u n
Step_1: Select Global Configuration, after that the parameters of GTCFG show in Command
Operation Space.
Q fide
n
o
Step_4: Set the global parameters. Please refer to GL200 @Track Air Interface Protocol for the
C
meaning of each parameter.
Step_5: Click the Send button; download the parameters of GTCFG to GL200.
TRACGL200MT002 - 23 -
3.2.5 Set the parameters of Auto-Unlock PIN
Step_4
Step_1
Step_3
Step_2
Step_5
i n k
Step_1: Select Auto-Unlock-PIN, after that the parameters of GTPIN show in Command
l l
Operation Space.
c a
e i
t
u n
Q fide
Step_4: Set the auto-unlock PIN parameters. Please refer to GL200 @Track Air Interface
Protocol for the meaning of each parameter.
Step_5: Click the Send button; download the parameters of GTPIN to GL200.
o n
3.2.6 Set the parameters of Protocol Watchdog
Step_1
C Step_4
Step_2 Step_3
Step_5
Step_1: Select Software Protocol Watchdog, after that the parameters of GTDOG show in
TRACGL200MT002 - 24 -
Step_4: Set the Software Protocol Watchdog parameters. Please refer to GL200 @Track Air
k
Step_5: Click the Send button; download the parameters of GTDOG to GL200.
i n
3.2.7 Set the parameters of Time Adjustment
cl ia l
e t
Step_4
Step_1
u
Q fide n Step_3
n
Step_2
o
Step_5
C
Step_1: Select Time Adjustment, after that the parameters of GTTMA show in Command
Operation Space.
Step_4: Set the Time Adjustment parameters. Please refer to GL200 @Track Air Interface
Step_5: Click the Send button; download the parameters of GTTMA to GL200.
TRACGL200MT002 - 25 -
3.2.8 Set the parameters of Non Movement Detection
Step_4
Step_1
k
Step_3
Step_2
i n
Step_5
cl a l
Step_1: Select Non Movement Detection, after that the parameters of GTNMD show in
e i
u n t
Q fide
Step_4: Set the Non Movement Detection parameters. Please refer to GL200 @Track Air
n
o
Step_5: Click the Send button; download the parameters of GTNMD to GL200.
C
TRACGL200MT002 - 26 -
3.2.9 Set the parameters of Function Key Setting
Step_4
Step_1
k
Step_3
n
Step_2
l i
Step_5
c a l
Step_1: Select Function Key Setting, after that the parameters of GTFKS show in Command
e i
Operation Space.
u n t
Q fide
Step_4: Set the Function Key parameters. Please refer to GL200 @Track Air Interface Protocol
n
for the meaning of each parameter.
o
Step_5: Click the Send button; download the parameters of GTFKS to GL200.
C
TRACGL200MT002 - 27 -
3.2.10 Set the parameters of Outside Working Hours
Step_4
Step_1
k
Step_3
n
Step_2
l i
Step_5
c a l
Step_1: Select Outside Working Hours, after that the parameters of GTOWH show in Command
e i
Operation Space.
u n t
Q fide
Step_4: Set the Outside Working Hours parameters. Please refer to GL200 @Track Air Interface
n
o
Step_5: Click the Send button; download the parameters of GTOWH to GL200.
C
TRACGL200MT002 - 28 -
3.2.11 Set the parameters of Fixed Report Information
Step_1
Step_4
k
Step_3
l i n
Step_2
c l
Step_5
u e t ia
Q fide n Step_4
o n
C
Step_1: Select Fixed Position Report, after that the parameters of GTFRI show in Command
Operation Space.
Step_4: Set the scheduled report parameters. Please refer to GL200 @Track Air Interface
TRACGL200MT002 - 29 -
Step_5: Click the Send button; download the parameters of GTFRI to GL200.
3.2.12 Set the parameters of Geo-Fence Information
Step_1
Step_4
i n k
l l
Step_3
Step_2
e c t ia
Step_5
u n
Step_1: Select Geo-Fence Configuration, after that the parameters of GTGEO show in
Q fide
o n
C
Step_4: Set the Geo-Fence parameters. Please refer to GL200 @Track Air Interface Protocol for
the meaning of each parameter.
Step_5: Click the Send button; download the parameters of GTGEO to GL200.
TRACGL200MT002 - 30 -
3.2.13 Set the parameters of Speed Alarm
Step_4
Step_1
Step_3
Step_2
n k
Step_5
l i l
Step_1: Select Speed Alarm, after that the parameters of GTSPD show in Command Operation
c a
Space.
e t i
u n
Q fide
Step_4: Set the Speed Alarm parameters. Please refer to GL200 @Track Air Interface Protocol
o n
Step_5: Click the Send button; download the parameters of GTSPD to GL200.
C
3.2.14 Set the parameters of Digital Output Port Settings
Step_3
Step_1
Step_2
Step_4
Step_1: Select Digital Output Port Setting, after that the parameters of GTOUT show in
TRACGL200MT002 - 31 -
and displayed here. Please note this command message can also be sent to GL200 through
SMS or GPRS.
Step_3: Set the Digital Output parameters. Please refer to GL200 @Track Air Interface Protocol
Step_4: Click the Send button; download the parameters of GTOUT to GL200.
3.2.15 Set the parameters of Digital Input Port Setting
i n k
cl l
Step_1 Step_4
u e t ia
n
Step_3
Q fide
Step_2
Step_5
n
Step_1: Select Digital Input Port Setting, after that the parameters of GTDIS show in Command
o
Operation Space.
C
SMS or GPRS.
Step_4: Set the Digital Input parameters. Please refer to GL200 @Track Air Interface Protocol
Step_5: Click the Send button; download the parameters of GTDIS to GL200.
TRACGL200MT002 - 32 -
3.2.16 Set the parameters of Real Time Operation
Step_3
Step_1
k
Step_2
i n
Step_4
cl a l
Step_1: Select Real Time Operation, after that the parameters of GTRTO show in Command
e i
Operation Space.
u n t
Q fide
Step_3: Set the Real Time Operation parameters. Please refer to GL200 @Track Air Interface
n
Step_4: Click the Send button; download the parameters of GTRTO to GL200.
o
3.2.17 Set the parameters of Transparent Data Transmission
Step_1
C Step_3
Step_2
Step_4
TRACGL200MT002 - 33 -
Step_1: Select transparent data transmission, after that the parameters of GTDAT show in
Step_3: Set the Transparent Data Transmission parameters. Please refer to GL200 @Track Air
Step_4: Click the Send button; download the parameters of GTDAT to GL200.
k
3.2.18 Set the parameters of White Call List Configuration
cl i n l
e t ia
Step_4
u n
Step_1
Q fide
Step_3
n
Step_2 Step_5
o
Step_1: Select White Call List Configuration, after that the parameters of GTWLT show in
C
SMS or GPRS.
Step_4: Set the White Call List parameters. Please refer to GL200 @Track Air Interface
Step_5: Click the Send button; download the parameters of GTWLT to GL200.
TRACGL200MT002 - 34 -
3.2.19 Set the parameters of Google link SMS configuration
Step_4
Step_1
Step_3
n k
Step_2
Step_5
cl i a l
Step_1: Select Google Link SMS Configuration, after that the parameters of GTGLM show in
e i
u n t
Q fide
SMS or GPRS.
Step_4: Set the Google link SMS parameters. Please refer to GL200 @Track Air Interface
n
o
Step_5: Click the Send button; download the parameters of GTGLM to GL200.
C
TRACGL200MT002 - 35 -
3.2.20 Set the parameters of Network Select
Step_4
Step_1
Step_3
n k
Step_2
Step_5
cl i a l
Step_1: Select Network Select, after that the parameters of GTNTS show in Command
e i
Operation Space.
u n t
Q fide
SMS or GPRS.
Step_4: Set the Network Select parameters. Please refer to GL200 @Track Air Interface
n
o
Step_5: Click the Send button; download the parameters of GTNTS to GL200.
C
TRACGL200MT002 - 36 -
3.2.21 Set the parameters of Store Command String
Step_4
Step_1
Step_3
n k
Step_2
Step_5
cl i a l
Step_1: Select Store Command String, after that the parameters of GTCMD show in Command
e i
Operation Space.
u n t
Q fide
SMS or GPRS.
Step_4: Set the Store Command String parameters. Please refer to GL200 @Track Air Interface
n
o
Step_5: Click the Send button; download the parameters of GTCMD to GL200.
C
TRACGL200MT002 - 37 -
3.2.22 Set the parameters of User Defined Function
Step_4
Step_1
Step_3
n k
Step_2
Step_5
cl i a l
e i
Step_1: Select Store Command String, after that the parameters of GTUDF show in Command
t
Operation Space.
u n
Q fide
SMS or GPRS.
n
Step_4: Set the User Defined parameters. Please refer to GL200 @Track Air Interface Protocol
o
C
Step_5: Click the Send button; download the parameters of GTUDF to GL200.
TRACGL200MT002 - 38 -
3.2.23 Set the parameters of Safe Flight Manager
Step_4
Step_1
Step_3
n k
Step_2 Step_5
cl i a l
e i
Step_1: Select Store Command String, after that the parameters of GTSFM show in Command
t
Operation Space.
u n
Q fide
SMS or GPRS.
n
Step_4: Set the Safe Flight Manager parameters. Please refer to GL200 @Track Air Interface
o
C
Step_5: Click the Send button; download the parameters of GTSFM to GL200.
TRACGL200MT002 - 39 -
3.3. Read/Save All Configuration
Step_1: It is recommended to read all configurations from device before save the configuration.
Select Read All ConfigurationRead From Device.
Step_2: After read successfully, click Save All Configuration in toolbar.
i n k
l l
Step_3: Select a folder, and key in the name of configuration file, then click Save button.
e c t ia
u
Q fide n
o n
C
Step_4: Save successfully.
TRACGL200MT002 - 40 -
3.4. Load/Execute All Configuration
Step_1: Before execute all configurations, please load the configuration file or set all parameters
in commands. To load configuration file, please select Read All Configuration Load
Configurations From File. And then select the configuration file you needed.
i n k
cl ia l
u e n t
Q fide
o n
C
Step_2: You can set the parameters in commands base on the configuration file, and then click
Execute All Configuration in toolbar.
Step_3: Manage Tool will write all commands to device.
TRACGL200MT002 - 41 -

GL200 Manager Tool User Guide V203 Decrypted.100130848

Uploaded by

Copyright:

Available Formats

GL200 Manager Tool User Guide V203 Decrypted.100130848

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

GL200 Manager Tool User Guide V203 Decrypted.100130848

Uploaded by

Copyright:

Available Formats

GSM/GPRS/GPS Tracker GL200

Manage Tool User Guide

Document Title GL200 Manage Tool User Guide

Document Control ID TRACGL200MT002

3.2.19 Set the parameters of Google link SMS configuration ........................................... 35

Revision Date Author Description of change

2. GL200 Manage Tool Interface

Supported System Environments:

2.2. COM Setting

2.4. Professional Setting Windows

2.4.1 Title Bar

2.4.2.1 Start Menu

Start menu include COM Settings.

2.4.2.2 Tool Menu

[Operation Log]: It is used to display/hidden the operation log.

Advanced Options include COM settings and other settings.

Help menu include About and Diagnosis.

[Operation Log]: It is used to display/hidden operation log.

[Read All Configuration]: It is used to display/hidden operation log.

2.4.5.1 Command Brower

Command Brower Function Description Relative Command

Time Adjustment GTTMA

[Command Description]: There is a short description for reference command.

[Parameters Area]: Set/Read parameters of this command in this area.

[Read]: Click this button to read this command from device.

[Send]: Click this button to send this command to device.

2.5. Operation Result Interface

2.5.1 Operation Successfully Interface

Please change to correct device password if Password Error.

3.1. Device Configuration with Quick Setting Wizard

3.1.2 GPRS Network Setting

Step_2: Then click Next.

Step_3: Click Next.

Step_2: Click Next.

3.2. Device Configuration in Professional Setting Mode

Following is a general procedure to configure GL200 with manage tool.

3.2.1 Set the parameters of Bearer Setting Information

3.2.2 Set the parameters of Backend Server Register Information

3.2.3 Set the parameters of Quick Start Setting

3.2.4 Set the parameters of Global Configuration

3.2.5 Set the parameters of Auto-Unlock PIN

Command Operation Space.

3.2.8 Set the parameters of Non Movement Detection

3.2.9 Set the parameters of Function Key Setting

3.2.10 Set the parameters of Outside Working Hours

3.2.11 Set the parameters of Fixed Report Information

3.2.12 Set the parameters of Geo-Fence Information

3.2.13 Set the parameters of Speed Alarm

3.2.15 Set the parameters of Digital Input Port Setting

3.2.16 Set the parameters of Real Time Operation

3.2.19 Set the parameters of Google link SMS configuration

3.2.20 Set the parameters of Network Select

3.2.21 Set the parameters of Store Command String

3.2.22 Set the parameters of User Defined Function

3.2.23 Set the parameters of Safe Flight Manager

3.3. Read/Save All Configuration

Step_2: After read successfully, click Save All Configuration in toolbar.

3.4. Load/Execute All Configuration

Step_3: Manage Tool will write all commands to device.

You might also like