MSGAMSGB SSGS SSG

Ground Spur Gears Ground Spur Pinion Shafts Ground Spur Gears

Series

Gears
Spur
m1 4 Page 38 m 1.5 3 Page 50 m 0.5 6 Page 52

Spur Gears
SSS SS SSA
Spur Pinion Shafts Steel Spur Gears Steel Hubless Spur Gears

Helical
Gears
Series

KHK products are available from

Internal
Gears
m 0.5 3 Page 106 m 0.5 10 Page 108 m1 5 Page 200
MARYLAND METRICS
P.O. Box 261 Owings Mills, MD 21117 USA
SSY SSAY SSAY/K
ph: (410)358-3130 (800)638-1830
Steel Thin Face Spur Gears Steel Hubless Thin Face Spur Gears with Built-In fx: (410)358-3142 (800)872-9329

Racks
Spur Gears Clamps
email: [email protected]
http://mdmetric.com
RFQ form: http://mdmetric.com/rfq.htm

CP Racks
& Pinions
m 0.8, 1 Page 206 m1 Page 210 m 0.8, 1 Page 212 Catalog Number of KHK Stock Gears
The Catalog Number for KHK stock gears is based on the simple
LS SUSSUSA SUSL
formula listed below. Please order KHK gears by specifying the
Sintered Metal Spur Gears Stainless Steel Spur Gears Stainless Steel Fairloc Hub Catalog Numbers.

Gears
Miter
Spur Gears
Series
(Example) Spur Gears
S S G 1 - 15

Gears
Bevel
Newly added
m 0.5, 0.8 Page 216 m1 4 Page 218 m 0.5 1 Page 266 No. of Teeth (15
Module (1
Others (Ground Gear)
DSL NSU PU
Type (Spur Gear

Screw
Gears
Acetal Fairloc Hub Spur Plastic Spur Gears with Plastic Spur Gears with
Gears Steel Core Stainless Steel Core
Material (S45C
Material Type
S S45C S Spur Gears

Products Gearboxes Gear Pair

M SCM415

Worm
SU SUS303 Other Information
m 0.5 1 Page 270 m1 3 Page 274 m1 2 Page 280
P MC901 A Hubless Gears
N MC602-ST G Ground Gears
D DURACON L Fairloc Hub Gears
PSPSA SUKB DS
BS Free-Cutting Brass C3604 R Ring Gears
Bevel

Plastic Spur Gears Stainless Steel Hubs Injection Molded Spur

Gears
L SMF5040 S Pinion Shafts
Series U Plastic Gears with Steel Core
Y Thin Face Gears
Other

Newly added NEW

m1 3 Page 282 30 100 m 0.5 1 Page 336
Page 334
Feature Icons
RoHS Compliant
Stainless Product
Product
BB BSS SSR
Sintered Metal Bushings Brass Spur Gears Steel Ring Gears
(Spur Gears) Re-machinable Resin Product
Product
Copper Alloy
Finished Product Product
Heat Treated Injection Molded
Product Product
5 8 Page 338 m 0.5 1 Page 340 m2 3 Page 346 Black Oxide coated
Ground Gear
Product

33
 Spur Gears

Characteristics
To meet your requirements, KHK stock gears are made in a variety of types, materials, configurations, modules and numbers
of teeth. We also offer products that allow secondary operations to be performed on the bores, shafts, outside diameters,
keyways and set screws. The following table lists the main features.

Heat
Tooth Secondary
Catalog No. Module Material Surface Precision Features
Treatment JIS B 1702-1:1998 Operations
Finish

MSGAMSGB 14 SCM415 Carburized Ground N5 High strength, abrasion-resistant and compact.

Thermal
refined Gear Ground shaft pinions that allow modification of
SSGS 1.5 3 S45C teeth induction Ground N7
shafts to fit your bearings.
hardened
Gear teeth
Although heat treatment is applied to tooth area, secondary operation
SSG 0.5 6 S45C induction hardened Ground N7
NOTE 1 can be added. Finished products for J Series are also available.

Thermal refined N8 For the SS series, Shaft-Pinions with a small num-

SSS 0.5 3 S45C Cut
NOTE 2 NOTE 3 ber of teeth (10 to 13 teeth) are available.

N8 A low priced, general usage gear with a large selection of modules and
SS 0.5 10 S45C Cut
NOTE 3 number of teeth, finished products for J Series are also available.

Hubless gears for lighter and more compact applica-

SSA 15 S45C Cut N8
tions.

SSY 0.81 S45C Cut N8 Narrower face gears for light-duty applications.
NOTE 3

Hubless and narrow faces for even lighter and more

SSAY 1 S45C Cut N8
compact gears.

N8 Compact sized gears can be clamped to the shafts

SSAY/K 0.81 S45C Cut
NOTE 3 without a hub.

SMF5040 N8 Low cost due to elimination of machining and reduc-

LS 0.50.8 Sintered
Equiv. to S45C NOTE 3 tion in wasted material.

Stainless steel gears for more rust-resistant gears.

SUSSUSA 14 SUS303 Cut N8
Finished products for J Series are also available.

N8 Smaller module gears which clamp to the shafts

SUSL 0.5 1 SUS303 Cut
NOTE 3 without any keys or set screws.

Acetal N10 These rust-resistant gears can be clamped to the

DSL 0.5 1 Cut
SUS303 NOTE 3 shafts without any keys or set screws.

MC602ST Nylon teeth with steel hubs that can have keyways
NSU 13 Cut N9
S45C and set screws added.

MC901 Nylon teeth with stainless steel hubs for rust-resis-

PU 12 Cut N9
SUS303 tance.

Possible to operate without lubrication. Suitable for food process-

PSPSA 13 MC901 Cut N9
ing machines. Finished products for J Series are also available.

Duracon Injection Equiv. to Low cost, mass-produced products suitable for light
DS 0.5 1
M90-44 Molded N12 duty office machines.

Free-cutting Brass N8 Small module brass spur gears suitable for mating
BSS 0.5 1 Cut
C3604 NOTE 3 with DS gears.

Allows large gear ratios. Can also be used as seg-

SSR 23 S45C Cut N9
ment gears and corner racks.

NOTE 1Products with module less than 0.8 are thermal refined, without gear teeth hardened.
NOTE 2SA-shaped products with module less than 1 have no material thermal refinement treatment. Possible Partly possible Not possible
NOTE 3For products which are smaller than module 0.8, the accuracy grade is equivalent to the value shown.

By chamfering the corners of the top land, gear noise is reduced, and the chances of damage due to handling and transportation
are decreased. All KHK gears larger than m1.5 have their teeth chamfered.
Black colored products are KHK stock gears that have black oxide coating for rust resistance; this blackness is a product charac-
teristic of KHK stock gears.

34
 KHK Technical Information

Selection Hints
Please select the most suitable products by carefully considering the characteristics of items and contents of the product tables. It is also im-
portant to read all applicableCAUTIONnotes before the final selection. Use of catalog numbers when ordering will simplify and expedite the
processing of your order.
1. Caution in selecting the mating Gears 2. Caution in Selecting Gears Based on Gear Strength
Basically, all spur gears, internal gears and racks can The gear strength values shown in the product pages were
be paired as long as the module matches. The product computed by assuming a certain application environment.
with different materials, tooth widths, or methods of cut- Therefore, they should be used as reference only. We rec-
ting the teeth can be mated. ommend that each user computes his own values by ap-
When using a pinion with an internal gear with a small plying the actual usage conditions. Also, SUSL Fairloc hub
difference in the numbers of teeth, there are possibili- spur gears, DSL Fairloc hub spur gears and SSAY/K spur
ties for involute interference, trochoid interference and gears with built-in clamps need additional considerations
trimming interference. See the internal gear interference of the starting torque.
portion of the technical section to avoid problems in as- The table below contains the assumptions established for
sembling these items. (Page 367) various products in order to compute gear strengths.
Calculation of Bending Strength of Gears
SSS,SS,SSA SUS
Catalog No. PU
MSGA SSY,SSAY SUSA DSL
SSGS SSG BSS NSU PS
MSGB SSAY/K SUSL DS
Item PSA
SSR LS
Formula NOTE 1 Formula of spur and helical gears on bending strength (JGMA401-01) The Lewis formula
No. of teeth of mating gears Same number of teeth (30 for SSGSSSSSSR)
Rotation 600rpm 100rpm 100rpm
Durability Over 107 cycles
Impact from motor Uniform load Allowable Bending Stress(kgf/mm2)
Impact from load Uniform load m 0.5 4.0
Direction of load Bidirectional 1.38 1.15 m 0.8 4.0
(40 with No (40 with No m 1.0 3.5
Allowable bending stresss at root Flim (kgf/mm2) NOTE 1 47 24.5 19 (24.5)Note 3 19 (24.5)Note 4 10.5 4 Lubrication) Lubrication) (40 with Grease
Safety factor S F 1.2 Lubrication)

Calculation of Surface Durability (Except where it is common with Bending Strength)

Formula NOTE 1 Formula of spur and helical gears on surface durability(JGMA402-01)
Kinematic viscosity of lubricant 100cSt (50 )
Gear support Symmetric support by bearings Note 5

Allowable Hertz stress Hlim (kgf/mm2) 166 99 90 (62.5) NOTE 3 49 (62.5) NOTE 4 41.3
Safety factor SH 1.15
NOTE 1 JGMA (Japanese ManufacturersAssociation),MC Nylon Technical Dataof Nippon Polypenco Limited andDuracon Gearof Polyplastic Co. The units for
rotational speed (rpm) and the load (kgf/mm2) were matched to the units needed in the equation.
NOTE 2 Since the load is bidirectional, the allowable bending stress at root Flim, calculated from JGMA 401-01, is set to 2/3 of the value.
NOTE 3 For SSG Ground Spur Gears, with module 0.8 or lesser, thermal refining is applied. Allowable bending stress and allowable hertz stress are referred to as the value
shown in the parentheses.
NOTE 4 For SSS Spur Pinion Shafts, with module over 1.5, teeth induction hardening is not applied. Allowable bending stress and allowable hertz stress are referred to
the value shown in the parentheses.
NOTE 5 SSS Spur Pinion Shafts with module 1.0 or lesser (SA configuration) are set to cantilever support as it is a single shaft type.

Definition of bending strength by JGMA 401-01(1974) Definition of surface durability by JGMA 402-01(1975)
The allowable bending strength The surface durability of a
of a gear is defined as the al- gear is defined as the allow-
lowable tangential force at the able tangential force at the
pitch circle based on the mu- pitch circle, which permits the
tually allowable root stress of force to be transmitted safely
two meshing gears under load. without incurring surface fail-
ure.
Example of the failure due to Example of the defacement
insufficient bending strength. due to insufficient surface
durability.

35
 Spur Gears

Application Hints
In order to use KHK stock gears safely, carefully read the
Application Hints before proceeding. If there are questions Heat Treatment
or if you require clarifications, please contact our technical If you apply induction hardening to the gear teeth of
department or your nearest distributor. S45C products, you need to designate the hardness
and where to apply the heat treatment. Below is an
KHK CO., LTD. TECHNICAL DEPARTMENT
example of common specifications and KHK's speci-
PHONE: 81-48-254-1744 FAX: 81-48-254-1765
fications for hardening:
E-mail [email protected]
Common Specifications for Heat Treatment
1.Caution on Performing Secondary Operations Area: Tooth surface, or, Tooth surface and
If you are reboring, it is important to pay special attention to Tooth root
locating the center in order to avoid runout. Hardness: Within 10 HRC in the range from 45
The reference datum for gear cutting is the bore. Therefore, to 60 HRC. (e.g. 48 - 58 HRC)
use the bore for locating the center. If it is too difficult to do
for small bores, the alternative is to use one spot on the bore KHKs Specifications for Heat Treatment
and the runout of the side surface. Area: Tooth surface, or, Tooth surface and
If the rework requires using scroll chucks, we recommend the Tooth root
use of new or rebored jaws for improved precision. If chuck- Hardness: From 45 to 55 HRC.
ing by the teeth, please apply the pressure carefully to avoid
crushing the teeth which will lead to noisy gears. Hardness and Depth of Gear-teeth Induction Hardening
The hardening method and the state of hardened
teeth area are varied depending on the size of gears.
Since different hardening treatment is applied in ac-
cordance with the module and number of teeth, the
hardness level you designate is referred to as the
hardness of the pitch line. For some of our products,
there may be a case that the hardness at tooth tip
/ root may not be equal to the hardness you desig-
nated.
Lathe Operations As to the effective case depth for S45C, it is speci-
fied by JIS, asThe distance from the surface of the
case to the area with hardness HV450. The case
The maximum bore size is dictated by the requirement that depth differs from area to area of a tooth.
the strength of the hub is to be higher than that of the gear
teeth. The maximum bore size should be 60% to 70% of the
2. Points of Caution in Assembling
hub diameter (or teeth root diameter), and 50 % to 60 % for
keyway applied modifications. KHK stock spur gears are designed to give the proper
In order to avoid stress concentration, leave radii on the key- backlash when assembled using the center distance
way corners. given by the formula below (center distance tolerance
of H7 H8).
Backlash may be adjusted by changing the center dis-
tance of mating gears. For more information, please
Tapping & Keyway Slotting
consult the technical section on gear backlash (page
648).

To avoid problems of reduced gear precision and other manu-

facturing difficulties, do not attempt to machine the gears to a m(Z1 +Z2)/2 where
reduce face widths. a Center Distance
If you apply induction hardening on gear teeth, please be aware m Module
of potential thermal stress cracks. Also, note that the precision Z1 No. of teeth of pinion
grade of the product declines by 1 or 2 grades, as deformation Z2 No. of teeth of gear
on material may occur. If you require tolerance for bore or other
parts, machining is necessary after heat treatment.
36
 KHK Technical Information

The table below indicates the tolerance on the total Verify that the two shafts are parallel. Incorrect assem-
length of KHK stock spur gears. Please refer to this bly will lead to uneven teeth contact which will cause
data when designing gear boxes or other components. noise and wear. (After assembly, the gear mesh can
Overall Length Tolerance for Spur and Helical Gears be checked by applying a contact pattern compound
and rotating the gears.)
Overall Length(mm) Tolerance
Test example: Abrasion occurred on SSG3-30 due to poor
0 edge contact (only 30% with proper contact).
Under 30
0.10
In this example, the gear oil used
Over 30 0 is equivalent to the JIS gear oil
Under 100 0.15 category 2, No. 3
The design conditions were load
0 torque at 278 rpm, 42.5 kg/m
Over 100
0.20 (12 kW), 1.5 times the allowable
bending strength, and 3 times the
Note Following products are excluded from this table: Spur pinion
allowable surface durability torque.
shafts, Injection molded spur gears, Fairloc hub spur gears, and
The pitting occurred on the poor
MC nylon products.
tooth contact area after 60 hours
Spur gears produce no thrust forces, however, be sure Poor tooth contact and pitting of continuous operation.
to fasten them firmly with stepped shafts, or collars, to
prevent shifting toward the shaft. Keyways are gener-
ally used in fastening gears to a shaft, and they should
be secured by applying drilled holes for set screws,
or applying flats to the shaft, in case of fastening only
with set screws. There are also methods of secure set-
tings using a MACHALOCK, a Posi-Lock, or a Shupan-
ring, which are parts for the engaging the hole and the
axis.

Application Examples

Takashima High-Speed Wire

Straightening & Cutting Machines
Full-automatic Forming Machine by Takashima Sangyo Co., Ltd.
by Jey Machine Co. SS Spur Gears are used at the
SSA and SS Spur Gears are feeder.
used for stirring devices.

Automatic Packing Machine by

New Max
SS Spur Gears, segment shaped
by secondary operation, are used
at the crimping device.

Electric Wire Winder by Sakuma

Tekko KK.
SS Spur Gears are used at the
stopper of handgrip.

37
 MSGAMSGB Module 1
Ground Spur Gears
G
Specifications E F

G
JIS grade N5 (JIS B1702-1: 1998)
Precision grade G
JIS grade 1 (JIS B1702: 1976)
Gear teeth Standard full depth
Gears

Pressure angle 20
Spur

Material SCM415 G

D
C
A
B
Heat treatment Overall carburizing

Tooth hardness 55 60HRC

Helical
Gears

S1

Bore Hub dia. Pitch dia. Outside dia. Face width Hub width Total length Web thickness Web O.D.
Catalog No. Module No. of teeth Shape
AH7 B C D E F G H I
MSGA1-18 18 S1 8 15 18 20 10 5 15
Internal
Gears

MSGA1-20 8
20 S1 17 20 22 10 5 15
MSGB1-20** 10
MSGA1-24 10
24 S1 20 24 26 10 5 15
MSGB1-24 12
MSGA1-25 10
Racks

25 S1 20 25 27 10 5 15
MSGB1-25 12
MSGA1-30 10
30 S1 25 30 32 10 5 15
MSGB1-30 12
MSGA1-35 10

CP Racks
& Pinions

35 S1 25 35 37 10 5 15
MSGB1-35 15
MSGA1-36 12
36 S1 25 36 38 10 5 15
MSGB1-36 15
MSGA1-40 12
40 S1 30 40 42 10 5 15
MSGB1-40 15
m1
Gears

MSGA1-45 12
Miter

45 S1 30 45 47 10 5 15
MSGB1-45 15
MSGA1-48 12
48 S1 30 48 50 10 5 15
MSGB1-48 15
MSGA1-50 12
50 S1 35 50 52 10 5 15
Gears

MSGB1-50 15
Bevel

MSGA1-55 15
55 S1 40 55 57 10 10 20
MSGB1-55 20
MSGA1-60 15
60 S1 40 60 62 10 10 20
MSGB1-60 20
Screw
Gears

MSGA1-70 20
70 S1 45 70 72 10 10 20
MSGB1-70 25
MSGA1-80 20
80 S1 45 80 82 10 10 20
MSGB1-80 25
Products Gearboxes Gear Pair

MSGA1-100 20
100 S1 45 100 102 10 10 20
Worm

MSGB1-100 25
[Caution on Product Characteristics] Although the dimensions of the keyway are made to the JIS (Js9) tolerance, there may be some deviations due to the
effects of the heat treatment.
The allowable torques shown in the table are the calculated values according to the assumed usage conditions.
Please see page 35 for more details.
The backlash values shown in the table are the theoretical values for the backlash in the normal direction for a pair
Bevel

of identical gears in mesh.

Products marked with**have a small amount of material between the corner of the keyway and the tooth root.
This mode of failure must be considered when selecting these gears. For details, please see our web site.
Other

38
 MSGAMSGB

Ground Spur Gears

Gears
Spur
Helical
Gears
Keyway Allowable torque (Nm) Allowable torque (kgfm) Backlash Weight
Catalog No.
WidthDepth Bending strength Surface durability Bending strength Surface durability (mm) (kg)

3 x 1.4 12.1 6.37 1.24 0.65 0.08~0.16 0.020 MSGA1-18

Internal
Gears
3 x 1.4 0.027 MSGA1-20
14.2 8.04 1.45 0.82 0.08~0.16
4 x 1.8 0.023 MSGB1-20**
4 x 1.8 0.038 MSGA1-24
18.5 12.0 1.88 1.22 0.08~0.16
4 x 1.8 0.034 MSGB1-24
4 x 1.8 0.041 MSGA1-25

Racks
19.6 13.1 2.00 1.33 0.08~0.16
4 x 1.8 0.037 MSGB1-25
4 x 1.8 0.065 MSGA1-30
25.1 19.0 2.56 1.94 0.08~0.16
4 x 1.8 0.061 MSGB1-30
4 x 1.8 0.085 MSGA1-35

CP Racks
& Pinions
30.7 26.2 3.13 2.67 0.08~0.16
5 x 2.3 0.073 MSGB1-35
4 x 1.8 0.085 MSGA1-36
31.9 27.8 3.25 2.84 0.08~0.16
5 x 2.3 0.077 MSGB1-36
4 x 1.8 0.11 MSGA1-40
36.5 34.6 3.72 3.53 0.08~0.16
5 x 2.3 0.10 MSGB1-40

Gears
4 x 1.8 0.14 MSGA1-45

Miter
42.3 44.3 4.31 4.51 0.08~0.16
5 x 2.3 0.13 MSGB1-45
4 x 1.8 0.16 MSGA1-48
45.8 50.6 4.67 5.16 0.08~0.16
5 x 2.3 0.15 MSGB1-48
4 x 1.8 0.18 MSGA1-50
48.1 55.1 4.91 5.62 0.08~0.16

Gears
5 x 2.3 0.17 MSGB1-50

Bevel
5 x 2.3 0.26 MSGA1-55
54.0 67.3 5.51 6.86 0.10~0.18
6 x 2.8 0.23 MSGB1-55
5 x 2.3 0.29 MSGA1-60
59.9 80.6 6.11 8.22 0.10~0.18
6 x 2.8 0.27 MSGB1-60

Screw
Gears
6 x 2.8 0.37 MSGA1-70
71.9 111 7.33 11.4 0.10~0.18
8 x 3.3 0.35 MSGB1-70
6 x 2.8 0.47 MSGA1-80
83.9 147 8.55 15.0 0.10~0.18
8 x 3.3 0.44 MSGB1-80

Products Gearboxes Gear Pair

6 x 2.8 0.69 MSGA1-100
103 224 10.5 22.8 0.10~0.18

Worm
8 x 3.3 0.66 MSGB1-100
[Caution on Secondary Operations] No secondary operations can be performed on these precision finished gears due
to the applied carburizing process. Other Bevel

For updated information, please see KHK Web Catalog. 39

 MSGAMSGB Module 1.5
Ground Spur Gears
G
Specifications E F

G
JIS grade N5 (JIS B1702-1: 1998)
Precision grade G
JIS grade 1 (JIS B1702: 1976)
Gear teeth Standard full depth
Gears

Pressure angle 20
Spur

Material SCM415 G

D
C
A
B
Heat treatment Overall carburizing

Tooth hardness 55 60HRC

Helical
Gears

S1

Bore Hub dia. Pitch dia. Outside dia. Face width Hub width Total length Web thickness Web O.D.
Catalog No. Module No. of teeth Shape
AH7 B C D E F G H I
MSGA1.5-15** 15 S1 10 18 22.5 22.5 15 10 25
Internal
Gears

MSGA1.5-18 10
18 S1 22 27 30 15 10 25
MSGB1.5-18 12
MSGA1.5-20 12
20 S1 25 30 33 15 10 25
MSGB1.5-20 15
MSGA1.5-24 12
Racks

24 S1 28 36 39 15 10 25
MSGB1.5-24 15
MSGA1.5-25 14
25 S1 30 37.5 40.5 15 10 25
MSGB1.5-25 16
MSGA1.5-30 15

CP Racks
& Pinions

30 S1 30 45 48 15 10 25
MSGB1.5-30 18
MSGA1.5-35 15
35 S1 32 52.5 55.5 15 10 25
MSGB1.5-35 18
MSGA1.5-36 15
36 S1 32 54 57 15 10 25
MSGB1.5-36 18
Gears

MSGA1.5-40 16
Miter

40 S1 35 60 63 15 10 25
MSGB1.5-40 m1.5 20
MSGA1.5-45 16
45 S1 40 67.5 70.5 15 10 25
MSGB1.5-45 20
MSGA1.5-48 16
48 S1 40 72 75 15 10 25
Gears

MSGB1.5-48 20
Bevel

MSGA1.5-50 18
50 S1 40 75 78 15 10 25
MSGB1.5-50 22
MSGA1.5-55 20
55 S1 45 82.5 85.5 15 10 25
MSGB1.5-55 25
Screw
Gears

MSGA1.5-60 20
60 S1 45 90 93 15 10 25
MSGB1.5-60 25
MSGA1.5-70 20
70 S1 45 105 108 15 10 25
MSGB1.5-70 25
Products Gearboxes Gear Pair

MSGA1.5-80 20
80 S1 45 120 123 15 10 25
Worm

MSGB1.5-80 25
MSGA1.5-100 25
100 S1 50 150 153 15 10 25
MSGB1.5-100 30
[Caution on Product Characteristics] Although the dimensions of the keyway are made to the JIS (Js9) tolerance, there may be some deviations due to the
effects of the heat treatment.
Bevel

The allowable torques shown in the table are the calculated values according to the assumed usage conditions.
Please see page 35 for more details.
The backlash values shown in the table are the theoretical values for the backlash in the normal direction for a pair
of identical gears in mesh.
Products marked with**have a small amount of material between the corner of the keyway and the tooth root.
This mode of failure must be considered when selecting these gears. For details, please see our web site.
Other

40
 MSGAMSGB

Ground Spur Gears

Gears
Spur
Helical
Gears
Keyway Allowable torque (Nm) Allowable torque (kgfm) Backlash Weight
Catalog No.
WidthDepth Bending strength Surface durability Bending strength Surface durability (mm) (kg)

4 x 1.8 30.8 14.8 3.15 1.51 0.08~0.16 0.050 MSGA1.5-15**

Internal
Gears
4 x 1.8 0.080 MSGA1.5-18
41.0 22.1 4.18 2.26 0.08~0.16
4 x 1.8 0.074 MSGB1.5-18
4 x 1.8 0.098 MSGA1.5-20
48.0 27.9 4.89 2.84 0.08~0.16
5 x 2.3 0.085 MSGB1.5-20
4 x 1.8 0.14 MSGA1.5-24

Racks
62.4 41.5 6.36 4.24 0.08~0.16
5 x 2.3 0.13 MSGB1.5-24
5 x 2.3 0.15 MSGA1.5-25
66.0 45.4 6.73 4.63 0.08~0.16
5 x 2.3 0.14 MSGB1.5-25
5 x 2.3 0.21 MSGA1.5-30

CP Racks
& Pinions
84.7 66.4 8.63 6.77 0.08~0.16
6 x 2.8 0.19 MSGB1.5-30
5 x 2.3 0.28 MSGA1.5-35
104 91.5 10.6 9.34 0.10~0.18
6 x 2.8 0.26 MSGB1.5-35
5 x 2.3 0.30 MSGA1.5-36
108 97.1 11.0 9.90 0.10~0.18
6 x 2.8 0.28 MSGB1.5-36

Gears
5 x 2.3 0.37 MSGA1.5-40

Miter
123 121 12.6 12.3 0.10~0.18
6 x 2.8 0.34 MSGB1.5-40
5 x 2.3 0.48 MSGA1.5-45
143 155 14.5 15.8 0.10~0.18
6 x 2.8 0.46 MSGB1.5-45
5 x 2.3 0.54 MSGA1.5-48
155 177 15.8 18.1 0.10~0.18

Gears
6 x 2.8 0.51 MSGB1.5-48

Bevel
6 x 2.8 0.57 MSGA1.5-50
162 193 16.6 19.7 0.10~0.18
6 x 2.8 0.54 MSGB1.5-50
6 x 2.8 0.69 MSGA1.5-55
182 236 18.6 24.0 0.10~0.18
8 x 3.3 0.65 MSGB1.5-55

Screw
Gears
6 x 2.8 0.81 MSGA1.5-60
202 283 20.6 28.8 0.10~0.18
8 x 3.3 0.77 MSGB1.5-60
6 x 2.8 1.08 MSGA1.5-70
231 372 23.6 38.0 0.12~0.20
8 x 3.3 1.04 MSGB1.5-70

Products Gearboxes Gear Pair

6 x 2.8 1.39 MSGA1.5-80
270 494 27.5 50.3 0.12~0.20

Worm
8 x 3.3 1.36 MSGB1.5-80
8 x 3.3 2.13 MSGA1.5-100
347 787 35.4 80.2 0.12~0.20
8 x 3.3 2.09 MSGB1.5-100
[Caution on Secondary Operations] No secondary operations can be performed on these precision finished gears due
to the applied carburizing process.
Other Bevel

For updated information, please see KHK Web Catalog. 41

 MSGAMSGB Module 2
Ground Spur Gears
G
Specifications E F

G
JIS grade N5 (JIS B1702-1: 1998)
Precision grade G
JIS grade 1 (JIS B1702: 1976)
Gear teeth Standard full depth
Gears

Pressure angle 20
Spur

Material SCM415 G

D
C
A
B
Heat treatment Overall carburizing

Tooth hardness 55 60HRC

Helical
Gears

S1

Bore Hub dia. Pitch dia. Outside dia. Face width Hub width Total length Web thickness Web O.D.
Catalog No. Module No. of teeth Shape
AH7 B C D E F G H I
MSGA2-15
Internal

12

Gears

15 S1 24 30 34 20 10 30
MSGB2-15** 15
MSGA2-18 12
18 S1 30 36 40 20 10 30
MSGB2-18 15
MSGA2-20 15
20 S1 32 40 44 20 10 30
MSGB2-20 18
Racks

MSGA2-24 15
24 S1 35 48 52 20 10 30
MSGB2-24 18
MSGA2-25 16
25 S1 35 50 54 20 10 30
MSGB2-25 20
CP Racks
& Pinions

MSGA2-30 18
30 S1 40 60 64 20 10 30
MSGB2-30 22
MSGA2-35 18
35 S1 40 70 74 20 10 30
MSGB2-35 22
MSGA2-36 18
36 S1 40 72 76 20 10 30
MSGB2-36 22
Gears
Miter

MSGA2-40 20
m2 40 S1 45 80 84 20 10 30
MSGB2-40 25
MSGA2-45 20
45 S1 45 90 94 20 10 30
MSGB2-45 25
Gears
Bevel

MSGA2-48 22
48 S1 50 96 100 20 10 30
MSGB2-48 28
MSGA2-50 22
50 S1 50 100 104 20 10 30
MSGB2-50 28
MSGA2-55 25
55 S1 55 110 114 20 10 30
Screw
Gears

MSGB2-55 30
MSGA2-60 25
60 S1 55 120 124 20 10 30
MSGB2-60 30
MSGA2-70 25
70 S1 55 140 144 20 10 30
Products Gearboxes Gear Pair

MSGB2-70 30
Worm

MSGA2-80 30
80 S2 60 160 164 20 10 30 13 144
MSGB2-80 35
MSGA2-100 35
100 S2 80 200 204 20 10 30 13 174
MSGB2-100 40
[Caution on Product Characteristics] Although the dimensions of the keyway are made to the JIS (Js9) tolerance, there may be some deviations due to the
Bevel

effects of the heat treatment.

The allowable torques shown in the table are the calculated values according to the assumed usage conditions.
Please see page 35 for more details.
The backlash values shown in the table are the theoretical values for the backlash in the normal direction for a pair
of identical gears in mesh.
Products marked with**have a small amount of material between the corner of the keyway and the tooth root.
Other

This mode of failure must be considered when selecting these gears. For details, please see our web site.

42
 MSGAMSGB

Ground Spur Gears

G
E F
G

G
G

Gears
Spur
G D
C
A
B
I

Helical
Gears
S2

Keyway Allowable torque (Nm) Allowable torque (kgfm) Backlash Weight

Catalog No.
WidthDepth Bending strength Surface durability Bending strength Surface durability (mm) (kg)

MSGA2-15

Internal
4 x 1.8 0.12

Gears
73.1 35.7 7.46 3.64 0.10~0.20
5 x 2.3 0.10 MSGB2-15**
4 x 1.8 0.19 MSGA2-18
97.2 53.5 9.91 5.46 0.10~0.20
5 x 2.3 0.17 MSGB2-18
5 x 2.3 0.22 MSGA2-20
114 67.6 11.6 6.89 0.10~0.20
6 x 2.8 0.20 MSGB2-20

Racks
5 x 2.3 0.32 MSGA2-24
148 101 15.1 10.3 0.10~0.20
6 x 2.8 0.30 MSGB2-24
5 x 2.3 0.33 MSGA2-25
157 110 16.0 11.2 0.10~0.20
6 x 2.8 0.31 MSGB2-25

CP Racks
& Pinions
6 x 2.8 0.48 MSGA2-30
201 161 20.5 16.5 0.12~0.22
6 x 2.8 0.45 MSGB2-30
6 x 2.8 0.64 MSGA2-35
246 223 25.1 22.7 0.12~0.22
6 x 2.8 0.61 MSGB2-35
6 x 2.8 0.67 MSGA2-36
255 236 26.0 24.1 0.12~0.22
6 x 2.8 0.64 MSGB2-36

Gears
Miter
6 x 2.8 0.84 MSGA2-40
292 294 29.7 30.0 0.12~0.22
8 x 3.3 0.79 MSGB2-40
6 x 2.8 1.05 MSGA2-45
338 377 34.5 38.4 0.12~0.22
8 x 3.3 1.00 MSGB2-45

Gears
Bevel
6 x 2.8 1.20 MSGA2-48
349 411 35.6 41.9 0.12~0.22
8 x 3.3 1.14 MSGB2-48
6 x 2.8 1.29 MSGA2-50
367 448 37.4 45.7 0.12~0.22
8 x 3.3 1.24 MSGB2-50
8 x 3.3 1.56 MSGA2-55
412 548 42.0 55.8 0.14~0.24

Screw
Gears
8 x 3.3 1.51 MSGB2-55
8 x 3.3 1.84 MSGA2-60
457 658 46.6 67.1 0.14~0.24
8 x 3.3 1.79 MSGB2-60
8 x 3.3 2.48 MSGA2-70
547 909 55.8 92.7 0.14~0.24

Products Gearboxes Gear Pair

8 x 3.3 2.43 MSGB2-70

Worm
8 x 3.3 2.55 MSGA2-80
610 1150 62.2 117 0.14~0.24
10 x 3.3 2.49 MSGB2-80
10 x 3.3 4.16 MSGA2-100
785 1820 80.1 186 0.14~0.24
12 x 3.3 4.09 MSGB2-100
[Caution on Secondary Operations] No secondary operations can be performed on these precision finished gears due
Bevel

to the applied carburizing process.

Other

For updated information, please see KHK Web Catalog. 43

 MSGAMSGB Module 2.5
Ground Spur Gears
G
Specifications E F

G
JIS grade N5 (JIS B1702-1: 1998)
Precision grade G
JIS grade 1 (JIS B1702: 1976)
Gear teeth Standard full depth
Gears

Pressure angle 20
Spur

Material SCM415 G

D
C
A
B
Heat treatment Overall carburizing

Tooth hardness 55 60HRC

Helical
Gears

S1

Bore Hub dia. Pitch dia. Outside dia. Face width Hub width Total length Web thickness Web O.D.
Catalog No. Module No. of teeth Shape
AH7 B C D E F G H I
MSGA2.5-15
Internal

15

Gears

15 S1 30 37.5 42.5 25 12 37
MSGB2.5-15** 18
MSGA2.5-18 18
18 S1 38 45 50 25 12 37
MSGB2.5-18 20
MSGA2.5-20 18
20 S1 40 50 55 25 12 37
MSGB2.5-20 22
Racks

MSGA2.5-24 18
24 S1 40 60 65 25 12 37
MSGB2.5-24 22
MSGA2.5-25 20
25 S1 45 62.5 67.5 25 12 37
MSGB2.5-25 25
CP Racks
& Pinions

MSGA2.5-30 22
30 S1 50 75 80 25 12 37
MSGB2.5-30 28
MSGA2.5-35 25
35 S1 55 87.5 92.5 25 12 37
MSGB2.5-35 30
MSGA2.5-36 25
m2.5 36 S1 55 90 95 25 12 37
MSGB2.5-36 30
Gears
Miter

MSGA2.5-40 25
40 S1 55 100 105 25 12 37
MSGB2.5-40 32
MSGA2.5-45 30
45 S1 60 112.5 117.5 25 12 37
MSGB2.5-45 35
Gears
Bevel

MSGA2.5-48 30
48 S1 60 120 125 25 12 37
MSGB2.5-48 35
MSGA2.5-50 30
50 S1 60 125 130 25 12 37
MSGB2.5-50 35
MSGA2.5-55 30
55 S1 70 137.5 142.5 25 12 37
Screw
Gears

MSGB2.5-55 40
MSGA2.5-60 30
60 S1 70 150 155 25 12 37
MSGB2.5-60 40
MSGA2.5-70 40
70 S2 85 175 180 25 12 37 17 150
Products Gearboxes Gear Pair

MSGB2.5-70 50
Worm

[Caution on Product Characteristics] Although the dimensions of the keyway are made to the JIS (Js9) tolerance, there may be some deviations due to the
effects of the heat treatment.
The allowable torques shown in the table are the calculated values according to the assumed usage conditions.
Please see page 35 for more details.
The backlash values shown in the table are the theoretical values for the backlash in the normal direction for a pair
of identical gears in mesh.
Bevel

Products marked with**have a small amount of material between the corner of the keyway and the tooth root.
This mode of failure must be considered when selecting these gears. For details, please see our web site.
Other

44
 MSGAMSGB

Ground Spur Gears

G
E F
G

G
G

Gears
Spur
G D
C
A
B
I

Helical
Gears
S2

Keyway Allowable torque (Nm) Allowable torque (kgfm) Backlash Weight

Catalog No.
WidthDepth Bending strength Surface durability Bending strength Surface durability (mm) (kg)

MSGA2.5-15

Internal
5 x 2.3 0.23

Gears
143 71.0 14.6 7.24 0.10~0.20
6 x 2.8 0.20 MSGB2.5-15**
6 x 2.8 0.34 MSGA2.5-18
190 107 19.4 10.9 0.10~0.20
6 x 2.8 0.32 MSGB2.5-18
6 x 2.8 0.42 MSGA2.5-20
222 134 22.7 13.7 0.10~0.20
6 x 2.8 0.39 MSGB2.5-20

Racks
6 x 2.8 0.59 MSGA2.5-24
289 201 29.4 20.5 0.12~0.22
6 x 2.8 0.56 MSGB2.5-24
6 x 2.8 0.66 MSGA2.5-25
306 220 31.2 22.4 0.12~0.22
8 x 3.3 0.60 MSGB2.5-25

CP Racks
& Pinions
6 x 2.8 0.94 MSGA2.5-30
392 322 40.0 32.8 0.12~0.22
8 x 3.3 0.87 MSGB2.5-30
8 x 3.3 1.25 MSGA2.5-35
480 444 49.0 45.3 0.12~0.22
8 x 3.3 1.19 MSGB2.5-35
8 x 3.3 1.32 MSGA2.5-36
498 471 50.8 48.0 0.12~0.22
8 x 3.3 1.26 MSGB2.5-36

Gears
Miter
8 x 3.3 1.61 MSGA2.5-40
543 560 55.3 57.1 0.12~0.22
10 x 3.3 1.52 MSGB2.5-40
8 x 3.3 2.00 MSGA2.5-45
629 718 64.1 73.2 0.14~0.24
10 x 3.3 1.93 MSGB2.5-45

Gears
Bevel
8 x 3.3 2.27 MSGA2.5-48
681 823 69.5 83.9 0.14~0.24
10 x 3.3 2.20 MSGB2.5-48
8 x 3.3 2.46 MSGA2.5-50
716 897 73.0 91.5 0.14~0.24
10 x 3.3 2.39 MSGB2.5-50
8 x 3.3 3.06 MSGA2.5-55
804 1090 82.0 112 0.14~0.24

Screw
Gears
12 x 3.3 2.90 MSGB2.5-55
8 x 3.3 3.62 MSGA2.5-60
892 1310 90.9 134 0.14~0.24
12 x 3.3 3.45 MSGB2.5-60
12 x 3.3 4.24 MSGA2.5-70
1020 1730 104 176 0.14~0.24

Products Gearboxes Gear Pair

14 x 3.8 4.03 MSGB2.5-70

Worm
[Caution on Secondary Operations] No secondary operations can be performed on these precision finished gears due
to the applied carburizing process.
Other Bevel

For updated information, please see KHK Web Catalog. 45

 MSGAMSGB Module 3
Ground Spur Gears
G
Specifications E F

G
JIS grade N5 (JIS B1702-1: 1998)
Precision grade G
JIS grade 1 (JIS B1702: 1976)
Gear teeth Standard full depth
Gears

Pressure angle 20
Spur

Material SCM415 G

D
C
A
B
Heat treatment Overall carburizing

Tooth hardness 55 60HRC

Helical
Gears

S1

Bore Hub dia. Pitch dia. Outside dia. Face width Hub width Total length Web thickness Web O.D.
Catalog No. Module No. of teeth Shape
AH7 B C D E F G H I
MSGA3-15
Internal

18

Gears

15 S1 36 45 51 30 15 45
MSGB3-15** 22
MSGA3-18 20
18 S1 45 54 60 30 15 45
MSGB3-18 25
MSGA3-20 20
20 S1 45 60 66 30 15 45
MSGB3-20 25
Racks

MSGA3-24 20
24 S1 45 72 78 30 15 45
MSGB3-24 25
MSGA3-25 25
25 S1 55 75 81 30 15 45
MSGB3-25 30
CP Racks
& Pinions

MSGA3-30 28
30 S1 60 90 96 30 15 45
MSGB3-30 35
MSGA3-35 30
35 S1 60 105 111 30 15 45
MSGB3-35 35
m3
MSGA3-36 30
36 S1 60 108 114 30 15 45
MSGB3-36 35
Gears
Miter

MSGA3-40 30
40 S1 70 120 126 30 15 45
MSGB3-40 40
MSGA3-45 30
45 S1 70 135 141 30 15 45
MSGB3-45 40
Gears
Bevel

MSGA3-48 35
48 S1 70 144 150 30 15 45
MSGB3-48 40
MSGA3-50 32
50 S2 70 150 156 30 15 45 20 126
MSGB3-50 40
MSGA3-55 35
55 S2 70 165 171 30 15 45 20 140
Screw
Gears

MSGB3-55 40
MSGA3-60 35
60 S2 80 180 186 30 15 45 20 156
MSGB3-60 45
[Caution on Product Characteristics] Although the dimensions of the keyway are made to the JIS (Js9) tolerance, there may be some deviations due to the
Products Gearboxes Gear Pair

effects of the heat treatment.

Worm

The allowable torques shown in the table are the calculated values according to the assumed usage conditions.
Please see page 35 for more details.
The backlash values shown in the table are the theoretical values for the backlash in the normal direction for a pair
of identical gears in mesh.
Products marked with**have a small amount of material between the corner of the keyway and the tooth root.
This mode of failure must be considered when selecting these gears. For details, please see our web site.
Other Bevel

46
 MSGAMSGB

Ground Spur Gears

G
E F
G

G
G

Gears
Spur
G D
C
A
B
I

Helical
Gears
S2

Keyway Allowable torque (Nm) Allowable torque (kgfm) Backlash Weight

Catalog No.
WidthDepth Bending strength Surface durability Bending strength Surface durability (mm) (kg)

MSGA3-15

Internal
6 x 2.8 0.40

Gears
247 124 25.2 12.7 0.10~0.20
6 x 2.8 0.35 MSGB3-15**
6 x 2.8 0.61 MSGA3-18
328 187 33.4 19.1 0.12~0.22
8 x 3.3 0.54 MSGB3-18
6 x 2.8 0.74 MSGA3-20
384 236 39.1 24.1 0.12~0.22
8 x 3.3 0.67 MSGB3-20

Racks
6 x 2.8 1.03 MSGA3-24
499 353 50.9 36.0 0.12~0.22
8 x 3.3 0.96 MSGB3-24
8 x 3.3 1.14 MSGA3-25
528 386 53.9 39.3 0.12~0.22
10 x 3.3 1.06 MSGB3-25

CP Racks
& Pinions
8 x 3.3 1.60 MSGA3-30
677 565 69.1 57.7 0.12~0.22
10 x 3.3 1.48 MSGB3-30
8 x 3.3 2.11 MSGA3-35
790 745 80.6 75.9 0.14~0.24
10 x 3.3 2.02 MSGB3-35
8 x 3.3 2.23 MSGA3-36
820 790 83.6 80.6 0.14~0.24
10 x 3.3 2.14 MSGB3-36

Gears
Miter
8 x 3.3 2.86 MSGA3-40
938 988 95.6 101 0.14~0.24
12 x 3.3 2.66 MSGB3-40
8 x 3.3 3.57 MSGA3-45
1090 1260 111 129 0.14~0.24
12 x 3.3 3.37 MSGB3-45

Gears
Bevel
10 x 3.3 3.94 MSGA3-48
1180 1450 120 147 0.14~0.24
12 x 3.3 3.83 MSGB3-48
10 x 3.3 3.79 MSGA3-50
1240 1570 126 161 0.14~0.24
12 x 3.3 3.62 MSGB3-50
10 x 3.3 4.39 MSGA3-55
1330 1830 135 187 0.14~0.24

Screw
Gears
12 x 3.3 4.29 MSGB3-55
10 x 3.3 5.31 MSGA3-60
1470 2200 150 224 0.14~0.24
14 x 3.8 5.08 MSGB3-60
[Caution on Secondary Operations] No secondary operations can be performed on these precision finished gears due

Products Gearboxes Gear Pair

to the applied carburizing process.

Bevel Worm

An example of KHK's inspection report

on tooth profile and lead errors.
Other

The precision grade of a spur gear (JIS B

1702-1:1998 and JIS B 1702-2:1998) is deter-
mined by factors such as single pitch error, pitch
variation error, accumulated pitch error, tooth pro-
file error, run out error, load error etc. For more de-
tails, please refer to the sectionAccuracy of Spur
and Helical Gearsin the technical reference.

For updated information, please see KHK Web Catalog. 47

 MSGAMSGB Module 4
Ground Spur Gears
G
Specifications E F

G
JIS grade N5 (JIS B1702-1: 1998)
Precision grade G
JIS grade 1 (JIS B1702: 1976)
Gear teeth Standard full depth
Gears

Pressure angle 20
Spur

Material SCM415 G

D
C
A
B
Heat treatment Overall carburizing

Tooth hardness 55 60HRC

Helical
Gears

S1

Bore Hub dia. Pitch dia. Outside dia. Face width Hub width Total length Web thickness Web O.D.
Catalog No. Module No. of teeth Shape
AH7 B C D E F G H I
MSGA4-15
Internal

25

Gears

15 S1 48 60 68 40 20 60
MSGB4-15** 30
MSGA4-18 25
18 S1 50 72 80 40 20 60
MSGB4-18 30
MSGA4-20 28
20 S1 60 80 88 40 20 60
MSGB4-20 32
Racks

MSGA4-24 28
24 S1 60 96 104 40 20 60
MSGB4-24 32
MSGA4-25 30
25 S1 60 100 108 40 20 60
MSGB4-25 35
CP Racks
& Pinions

MSGA4-30 35
30 S1 70 120 128 40 20 60
MSGB4-30 40
m4
MSGA4-35 35
35 S1 70 140 148 40 20 60
MSGB4-35 40
MSGA4-36 35
36 S1 70 144 152 40 20 60
MSGB4-36 40
Gears
Miter

MSGA4-40 40
40 S1 80 160 168 40 20 60
MSGB4-40 45
MSGA4-45 40
45 S1 80 180 188 40 20 60
MSGB4-45 45
Gears
Bevel

MSGA4-48 40
48 S2 80 192 200 40 20 60 26 160
MSGB4-48 45
MSGA4-50 40
50 S2 85 200 208 40 20 60 26 168
MSGB4-50 50
[Caution on Product Characteristics] Although the dimensions of the keyway are made to the JIS (Js9) tolerance, there may be some deviations due to the
Screw
Gears

effects of the heat treatment.

The allowable torques shown in the table are the calculated values according to the assumed usage conditions.
Please see page 35 for more details.
The backlash values shown in the table are the theoretical values for the backlash in the normal direction for a pair
of identical gears in mesh.
Products Gearboxes Gear Pair

Products marked with**have a small amount of material between the corner of the keyway and the tooth root.
Worm

This mode of failure must be considered when selecting these gears. For details, please see our web site.
Other Bevel

48
 MSGAMSGB

Ground Spur Gears

G
E F
G

G
G

Gears
Spur
G D
C
A
B
I

Helical
Gears
S2

Keyway Allowable torque (Nm) Allowable torque (kgfm) Backlash Weight

Catalog No.
WidthDepth Bending strength Surface durability Bending strength Surface durability (mm) (kg)

MSGA4-15

Internal
8 x 3.3 0.93

Gears
585 302 59.7 30.8 0.14~0.24
8 x 3.3 0.83 MSGB4-15**
8 x 3.3 1.34 MSGA4-18
777 455 79.3 46.4 0.14~0.24
8 x 3.3 1.24 MSGB4-18
8 x 3.3 1.72 MSGA4-20
910 574 92.8 58.6 0.14~0.24
10 x 3.3 1.63 MSGB4-20

Racks
8 x 3.3 2.41 MSGA4-24
1130 819 115 83.5 0.14~0.24
10 x 3.3 2.32 MSGB4-24
8 x 3.3 2.56 MSGA4-25
1190 896 122 91.4 0.14~0.24
10 x 3.3 2.44 MSGB4-25

CP Racks
& Pinions
10 x 3.3 3.69 MSGA4-30
1530 1320 156 134 0.16~0.26
12 x 3.3 3.54 MSGB4-30
10 x 3.3 4.97 MSGA4-35
1870 1820 191 185 0.16~0.26
12 x 3.3 4.83 MSGB4-35
10 x 3.3 5.25 MSGA4-36
1940 1930 198 197 0.16~0.26
12 x 3.3 5.11 MSGB4-36

Gears
Miter
12 x 3.3 6.49 MSGA4-40
2120 2290 216 234 0.16~0.26
14 x 3.8 6.33 MSGB4-40
12 x 3.3 8.17 MSGA4-45
2460 2930 251 299 0.16~0.26
14 x 3.8 8.01 MSGB4-45

Gears
Bevel
12 x 3.3 7.97 MSGA4-48
2660 3350 272 342 0.16~0.26
14 x 3.8 7.81 MSGB4-48
12 x 3.3 8.71 MSGA4-50
2800 3650 285 372 0.16~0.26
14 x 3.8 8.37 MSGB4-50
[Caution on Secondary Operations] No secondary operations can be performed on these precision finished gears due

Screw
Gears
to the applied carburizing process.

Products Gearboxes Gear Pair

Bevel Worm

An example of KHK's inspection report

on various pitch errors.
Other

The precision grade of a spur gear (JIS B

1702-1:1998 and JIS B 1702-2:1998) is deter-
mined by factors such as single pitch error, pitch
variation error, accumulated pitch error, tooth
profile error, run out error, load error etc. For more
details, please refer to the sectionAccuracy of
Spur and Helical Gearsin the technical refer-
ence.

For updated information, please see KHK Web Catalog. 49

 SSGS Module 1.522.53
Ground Spur Pinion Shafts
Specifications
JIS grade N7 (JIS B1702-1: 1998)
Precision grade
JIS grade 3 (JIS B1702: 1976)
G
Gear teeth Standard full depth
F E F
Gears

Pressure angle 20 20 20
Spur

G G G
Material S45C

A
D

A
C
Thermal refinined, tooth
Heat treatment S7
surfaces induction hardened
Tooth hardness 45 55HRC
Helical
Gears

Profile shift Shaft dia. (L) Shaft length (L) Pitch dia. Outside dia. Face width Shaft dia. (R)Shaft length (R) Total length
Catalog No. Module No. of teeth
coefficient
Shape
A' F' C D E A F G
Internal

SSGS1.5-10 10 +0.5 S7 12.2 25 15 19.35 15 12.2 100 140

Gears

SSGS1.5-11 11 +0.5 S7 13.7 25 16.5 20.85 15 13.7 100 140

m1.5
SSGS1.5-12 12 0 S7 13.7 25 18 21 15 13.7 100 140
SSGS1.5-13 13 0 S7 15.2 25 19.5 22.5 15 15.2 100 140
SSGS2-10 10 +0.5 S7 16.2 30 20 25.8 20 16.2 120 170
SSGS2-11 11 +0.5 S7 18.2 30 22 27.8 20 18.2 120 170
Racks

m2
SSGS2-12 12 0 S7 18.2 30 24 28 20 18.2 120 170
SSGS2-13 13 0 S7 20.2 30 26 30 20 20.2 120 170
SSGS2.5-10 10 +0.5 S7 20.2 35 25 32.25 25 20.2 135 195
SSGS2.5-11 11 +0.5 S7 22.7 35 27.5 34.75 25 22.7 135 195
CP Racks
& Pinions

m2.5
SSGS2.5-12 12 0 S7 22.7 35 30 35 25 22.7 135 195
SSGS2.5-13 13 0 S7 25.2 35 32.5 37.5 25 25.2 135 195
SSGS3-10 10 +0.5 S7 24.2 40 30 38.7 30 24.2 150 220
SSGS3-11 11 +0.5 S7 27.2 40 33 41.7 30 27.2 150 220
m3
SSGS3-12 12 0 S7 27.2 40 36 42 30 27.2 150 220
SSGS3-13 13 0 S7 30.2 40 39 45 30 30.2 150 220
Gears
Miter

[Caution on Product Characteristics] The allowable torques shown in the table are calculated values according to the assumed usage conditions. Please
see page 35 for more details.
10- and 11-tooth gears with a pitch of module 1.5 or greater are profile shifted gears (x = +0.5). Please refer to the
below tables for calculating the center distance when assembled.
The backlash values shown in the table are the theoretical values for the normal direction for a pair of identical SSG
Gears
Bevel

Spur Gears with 30 teeth in mesh.

Screw
Gears

Center distance of Stock Spur Gears Center distance when gear has 12 to 30 teeth (unit : mm) Center distance when gear has 32 to 62 teeth (unit : mm)
Products Gearboxes Gear Pair

No. of teeth(x=+0.5) No. of teeth(x=+0.5)

Meshing with Profile Shifted Spur Gears 10 11 10 11
Worm

No. of teeth(x=0) No. of teeth(x=0)

The table on the right shows the center distance 12 11.4410 11.9428 32 21.4640 21.9647
of the spur gears (x=0) which can be meshed 13 11.9428 12.4446 34 22.4653 22.9660
with profile shifted spur gears (x=+0.5) with 14 12.4446 12.9462 35 22.9660 23.4666

module 1. Multiply by the actual module to de- 15 12.9462 13.4477 36 23.4666 23.9671
16 13.4477 13.9492 38 24.4677 24.9683
termine your center distance.
Bevel

17 13.9492 14.4505 40 25.4688 25.9693

18 14.4505 14.9518 42 26.4698 26.9703
19 14.9518 15.4530 44 27.4707 27.9712
20 15.4530 15.9542 45 27.9712 28.4716
21 15.9542 16.4553 46 28.4716 28.9721
22 16.4553 16.9564 48 29.4725 29.9729
Other

23 16.9564 17.4574 50 30.4733 30.9736

24 17.4574 17.9583 52 31.4740 31.9744
25 17.9583 18.4592 54 32.4747 32.9750
26 18.4592 18.9601 55 32.9750 33.4754
27 18.9601 19.4610 56 33.4754 33.9757
28 19.4610 19.9618 58 34.4760 34.9763
29 19.9618 20.4625 60 35.4766 35.9769
30 20.4625 20.9633 62 36.4772 36.9774

50
 SSGS

Ground Spur Pinion Shafts

Gears
Spur
Helical
Gears
Allowable torque (Nm) Allowable torque (kgfm) Backlash Weight
Catalog No.
Bending strength Surface durability Bending strength Surface durability (mm) (kg)

Internal
12.7 3.76 1.30 0.38 0.08~0.16 0.14 SSGS1.5-10

Gears
14.5 4.61 1.48 0.47 0.08~0.16 0.17 SSGS1.5-11
9.97 4.70 1.02 0.48 0.08~0.16 0.17 SSGS1.5-12
12.1 5.51 1.23 0.56 0.08~0.16 0.21 SSGS1.5-13
30.2 9.07 3.08 0.93 0.11~0.21 0.30 SSGS2-10
34.3 11.0 3.50 1.12 0.11~0.21 0.38 SSGS2-11

Racks
23.6 11.3 2.41 1.15 0.11~0.21 0.38 SSGS2-12
28.6 13.3 2.92 1.35 0.11~0.21 0.46 SSGS2-13
58.9 17.9 6.01 1.83 0.11~0.21 0.54 SSGS2.5-10
67.1 22.0 6.84 2.24 0.11~0.21 0.68 SSGS2.5-11

CP Racks
& Pinions
46.2 22.4 4.71 2.28 0.11~0.21 0.68 SSGS2.5-12
46.6 21.9 4.75 2.23 0.11~0.21 0.83 SSGS2.5-13
102 31.3 10.4 3.19 0.11~0.21 0.89 SSGS3-10
96.6 31.9 9.85 3.26 0.11~0.21 1.11 SSGS3-11
66.5 32.6 6.78 3.32 0.11~0.21 1.11 SSGS3-12
80.4 38.3 8.20 3.91 0.11~0.21 1.35 SSGS3-13

Gears
Miter
[Caution on Secondary Operations] Please readCaution on Performing Secondary Operations(Page 36) when
performing modifications and/or secondary operations for safety concerns. Hagu-
ruma Kobo, the KHK's system for quick modification of KHK stock gears is also
available.
Due to the gear teeth being induction hardened, no secondary operations can

Gears
Bevel
be performed on tooth areas including the bottom land ( approx. 1 to 2 mm). Use
carbide tools for the modification of the shaft area near the bottom land.

Screw
Gears
Center distance when gear has 64 to 200 teeth (unit : mm)
Assembly distance of a profile shifted gear and the meshing rack

Products Gearboxes Gear Pair

No. of teeth(x=+0.5)
10 11

Worm
No. of teeth(x=0)
64 37.4777 37.9780 zm
a= +H+xm
65 37.9780 38.4782
2
66 38.4782 38.9785
68 39.4787 39.9790 Where
70 40.4792 40.9794 aAssembly Distance
Bevel

72 41.4796 41.9799
HHeight of pitch line of rack
75 42.9803 43.4805
76 43.4805 43.9807
mModule
80 45.4813 45.9814 zNo. of Teeth
84 47.4820 47.9822 xProfile Shift Coefficient
85 47.9822 48.4823
Other

88 49.4826 49.9828
90 50.4830 50.9831
95 52.9837 53.4838
100 55.4844 55.9845
120 65.4866 65.9867
150 80.4890 80.9890
200 105.4915 105.9915

For updated information, please see KHK Web Catalog. 51

 SSG Module 0.50.8
Ground Spur Gears
G
Specifications E F
JIS grade N7 (JIS B1702-1: 1998) J
Precision grade
JIS grade 3 (JIS B1702: 1976) G
Gear teeth Standard full depth
Gears

Pressure angle 20
Spur

Material S45C

D
A
B
C
Heat treatment Thermal refinined

Tooth hardness 225 260HB

Helical
Gears

Tooth areas, where size is less than 0.8 module, S1T

without quenching treatment.

Bore Hub dia. Pitch dia. Outside dia. Face width Hub width Total length Keyway
Catalog No. Module No. of teeth Shape
AH7 B C D E F G WidthDepth

SSG0.5-30A
Internal

S1T 5
Gears

30 13 15 16 5 7 12
SSG0.5-30B S1T 6
SSG0.5-32A 32 S1T 5 14 16 17 5 7 12
SSG0.5-34A 34 S1T 5 15 17 18 5 7 12
SSG0.5-35A 35 S1T 5 15 17.5 18.5 5 7 12
SSG0.5-36A 36 S1T 5 16 18 19 5 7 12
Racks

SSG0.5-38A 38 S1T 5 16 19 20 5 7 12
SSG0.5-40A S1T 5
40 18 20 21 5 7 12
SSG0.5-40B m0.5 S1T 6
SSG0.5-50A S1T 5
CP Racks
& Pinions

50 22 25 26 5 7 12
SSG0.5-50B S1T 6
SSG0.5-60A S1T 6
60 28 30 31 5 7 12
SSG0.5-60B S1T 8
SSG0.5-70A S1T 6
70 28 35 36 5 7 12
SSG0.5-70B S1T 8

Gears

SSG0.5-80A S1T 6
Miter

80 28 40 41 5 7 12
SSG0.5-80B S1T 8
SSG0.8-20A S1T 5
20 13 16 17.6 8 8 16
SSG0.8-20B S1T 6
SSG0.8-21A 21 S1T 6 14 16.8 18.4 8 8 16

Gears

SSG0.8-22A
Bevel

22 S1T 6 15 17.6 19.2 8 8 16

SSG0.8-23A 23 S1T 6 15 18.4 20 8 8 16
SSG0.8-24A S1T 5
24 16 19.2 20.8 8 8 16
SSG0.8-24B S1T 6
SSG0.8-25A S1T 5
25 16 20 21.6 8 8 16

Screw
Gears

SSG0.8-25B S1T 6
SSG0.8-26A 26 S1T 6 18 20.8 22.4 8 8 16
SSG0.8-27A 27 S1T 6 18 21.6 23.2 8 8 16
SSG0.8-28A 28 S1T 6 18 22.4 24 8 8 16

Products Gearboxes Gear Pair

SSG0.8-29A 29 S1T 6 20 23.2 24.8 8 8 16

Worm

SSG0.8-30A S1T 5
SSG0.8-30B 30 S1T 6 20 24 25.6 8 8 16
SSG0.8-30C m0.8 S1T 8
SSG0.8-32A 32 S1T 6 22 25.6 27.2 8 8 16
SSG0.8-34A 34 S1T 6 22 27.2 28.8 8 8 16

Bevel

SSG0.8-35A 35 S1T 6 25 28 29.6 8 8 16

SSG0.8-36A 36 S1T 6 25 28.8 30.4 8 8 16
SSG0.8-38A 38 S1T 6 25 30.4 32 8 8 16
SSG0.8-40A S1T 6
40 28 32 33.6 8 8 16
SSG0.8-40B S1T 8
Other

SSG0.8-50A S1T 6
50 28 40 41.6 8 8 16
SSG0.8-50B S1T 8
SSG0.8-60A S1T 6
60 28 48 49.6 8 8 16
SSG0.8-60B S1T 8
SSG0.8-70A S1T 6
70 28 56 57.6 8 8 16
SSG0.8-70B S1T 8
SSG0.8-80A S1T 6
80 28 64 65.6 8 8 16
SSG0.8-80B S1T 8
[Caution on Product Characteristics] For products with a tapped hole, a set screw is included.
The allowable torques shown in the table are calculated values according to the assumed usage conditions. Please see page 35 for more details.
The backlash values shown in the table are the theoretical values for the backlash in the normal direction of a pair of identical gears in mesh.

52
 SSG

Ground Spur Gears

Gears
Spur
Helical
Gears
Set Screw Allowable torque (Nm) Allowable torque (kgfm) Backlash Weight
Catalog No.
Size J Bending strength Surface durability Bending strength Surface durability (mm) (kg)

SSG0.5-30A

Internal
M4 3.5 0.012

Gears
1.63 0.29 0.17 0.030 0~0.08
M4 3.5 0.011 SSG0.5-30B
M4 3.5 1.78 0.34 0.18 0.035 0~0.08 0.014 SSG0.5-32A
M4 3.5 1.93 0.39 0.20 0.039 0~0.08 0.016 SSG0.5-34A
M4 3.5 2.00 0.41 0.20 0.042 0~0.08 0.017 SSG0.5-35A
M4 3.5 2.08 0.44 0.21 0.045 0~0.08 0.019 SSG0.5-36A

Racks
M4 3.5 2.23 0.49 0.23 0.050 0~0.08 0.020 SSG0.5-38A
M4 3.5 0.024 SSG0.5-40A
2.38 0.55 0.24 0.056 0~0.08
M4 3.5 0.023 SSG0.5-40B
M4 3.5 0.038 SSG0.5-50A

CP Racks
& Pinions
3.14 0.89 0.32 0.091 0~0.08
M4 3.5 0.037 SSG0.5-50B
M4 3.5 0.058 SSG0.5-60A
3.91 1.32 0.40 0.13 0~0.08
M5 3.5 0.056 SSG0.5-60B
M4 3.5 0.068 SSG0.5-70A
3.90 1.53 0.40 0.16 0~0.08
M5 3.5 0.066 SSG0.5-70B

Gears
M4 3.5 0.080 SSG0.5-80A

Miter
4.55 2.04 0.46 0.21 0~0.08
M5 3.5 0.077 SSG0.5-80B
M4 4 0.018 SSG0.8-20A
3.79 0.53 0.39 0.054 0~0.08
M4 4 0.017 SSG0.8-20B
M4 4 4.08 0.59 0.42 0.060 0~0.08 0.020 SSG0.8-21A

Gears
SSG0.8-22A

Bevel
M4 4 4.36 0.66 0.44 0.067 0~0.08 0.022
M4 4 4.64 0.73 0.47 0.074 0~0.08 0.024 SSG0.8-23A
M4 4 0.028 SSG0.8-24A
4.93 0.80 0.50 0.082 0~0.08
M4 4 0.027 SSG0.8-24B
M4 4 0.029 SSG0.8-25A
5.22 0.88 0.53 0.090 0~0.08

Screw
Gears
M4 4 0.028 SSG0.8-25B
M4 4 5.51 0.96 0.56 0.098 0~0.08 0.033 SSG0.8-26A
M4 4 5.81 1.04 0.59 0.11 0~0.08 0.035 SSG0.8-27A
M4 4 6.10 1.12 0.62 0.11 0~0.08 0.037 SSG0.8-28A

Products Gearboxes Gear Pair

M4 4 6.40 1.21 0.65 0.12 0~0.08 0.042 SSG0.8-29A

Worm
M4 4 0.045 SSG0.8-30A
M4 4 6.70 1.30 0.68 0.13 0~0.08 0.044 SSG0.8-30B
M5 4 0.041 SSG0.8-30C
M4 4 7.29 1.50 0.74 0.15 0~0.08 0.052 SSG0.8-32A
M4 4 7.90 1.71 0.81 0.17 0~0.08 0.056 SSG0.8-34A
Bevel

M4 4 8.20 1.82 0.84 0.19 0~0.08 0.065 SSG0.8-35A

M4 4 8.51 1.93 0.87 0.20 0~0.08 0.067 SSG0.8-36A
M4 4 9.12 2.17 0.93 0.22 0~0.08 0.072 SSG0.8-38A
M4 4 0.085 SSG0.8-40A
8.11 2.02 0.83 0.21 0~0.08
M5 4 0.082 SSG0.8-40B
Other

M4 4 0.11 SSG0.8-50A
10.7 3.26 1.09 0.33 0~0.08
M5 4 0.11 SSG0.8-50B
M4 4 0.15 SSG0.8-60A
13.3 4.83 1.36 0.49 0~0.08
M5 4 0.14 SSG0.8-60B
M4 4 0.19 SSG0.8-70A
16.0 6.73 1.63 0.69 0~0.08
M5 4 0.19 SSG0.8-70B
M4 4 0.24 SSG0.8-80A
18.7 8.97 1.90 0.91 0~0.08
M5 4 0.23 SSG0.8-80B
[Caution on Secondary Operations] Please readCaution on Performing Secondary Operations(Page 36) when performing modifications
and/or secondary operations for safety concerns. Haguruma Kobo, the KHK's system for quick modifica-
tion of KHK stock gears is also available.

For updated information, please see KHK Web Catalog. 53

 SSG Module 1
Ground Spur Gears
G
Specifications
E F
JIS grade N7 (JIS B1702-1: 1998)
Precision grade
JIS grade 3 (JIS B1702: 1976)
G
Gear teeth Standard full depth
Gears

Pressure angle 20
Spur

Material S45C
G

D
A
B
C
Heat treatment
Tooth surface induction
hardened
Tooth hardness 45 55HRC
Helical
Gears

The precision grade of J Series products is equiva- S1

lent to the value shown in the table.

Catalog No. Bore Hub dia. Pitch dia. Outside dia. Face width Hub width Total length Keyway
Module No. of teeth Shape
: J Series (Available-on-request) AH7 B C D E F G WidthDepth
SSG1-15 S1 6
Internal

15 12 15 17 8 10 18
Gears

SSG1-15 J6
SSG1-16
S1T
S1
6
6


16 13 16 18 8 10 18
SSG1-16 J6
SSG1-17
S1T
S1
6
6


SSG1-17 J6 17 S1T 6 14 17 19 8 10 18

Racks

SSG1-17 J8 S1T 8
SSG1-18 S1 6
SSG1-18 J6 18 S1T 6 15 18 20 8 10 18
SSG1-18 J8
SSG1-19
S1T
S1
8
6


CP Racks
& Pinions

SSG1-19 J6 19 S1T 6 16 19 21 8 10 18
SSG1-19 J8
SSG1-20
S1T
S1
8
6


SSG1-20 J6
20
S1T 6
17 20 22 8 10 18

SSG1-20 J8 S1T 8
SSG1-20 J10** S1K 10 4 x 1.8

Gears
Miter

SSG1-21 S1 8
SSG1-21 J8 21 S1T 8 18 21 23 8 10 18
SSG1-21 J10
SSG1-22
S1K
S1
10
8
4 x 1.8

SSG1-22 J8 22 S1T 8 18 22 24 8 10 18
SSG1-22 J10 S1K 10 4 x 1.8
Gears
Bevel

SSG1-23 S1 8
SSG1-23 J8
23
S1T 8
20 23 25 8 10 18

SSG1-23 J10 S1K 10 4 x 1.8
SSG1-23 J12
SSG1-24
m1 S1K
S1
12
8
4 x 1.8

Screw

Gears

SSG1-24 J8 S1T 8
24 20 24 26 8 10 18
SSG1-24 J10 S1K 10 4 x 1.8
SSG1-24 J12
SSG1-25
S1K
S1
12
8
4 x 1.8

SSG1-25 J8 S1T 8
Products Gearboxes Gear Pair

25 20 25 27 8 10 18
SSG1-25 J10 S1K 10 4 x 1.8
Worm

SSG1-25 J12
SSG1-26
S1K
S1
12
8
4 x 1.8

SSG1-26 J8
26
S1T 8
20 26 28 8 10 18

SSG1-26 J10 S1K 10 4 x 1.8
SSG1-26 J12 S1K 12 4 x 1.8
Bevel

SSG1-27 S1 8
SSG1-27 J8
27
S1T 8
20 27 29 8 10 18

SSG1-27 J10 S1K 10 4 x 1.8
SSG1-27 J12
SSG1-28
S1K
S1
12
8
4 x 1.8


Other

SSG1-28 J8 S1T 8
28 20 28 30 8 10 18
SSG1-28 J10 S1K 10 4 x 1.8
SSG1-28 J12
SSG1-29
S1K
S1
12
8
4 x 1.8

SSG1-29 J8 S1T 8
SSG1-29 J10
29
S1K 10
25 29 31 8 10 18
4 x 1.8
SSG1-29 J12 S1K 12 4 x 1.8
SSG1-29 J14 S1K 14 5 x 2.3
SSG1-29 J15 S1K 15 5 x 2.3
[Caution on Product Characteristics] The allowable torques shown in the table are calculated values according to the assumed usage conditions. Please see page 35 for more details.
The backlash values shown in the table are the theoretical values for the backlash in the normal direction of a pair of identical gears in mesh.
[Caution on Secondary Operations] Please readCaution on Performing Secondary Operations(Page 36) when performing modifications and/or secondary opera-
tions for safety concerns. Haguruma Kobo, the KHK's system for quick modification of KHK stock gears is also available.
Due to the gear teeth being induction hardened, no secondary operations can be performed on tooth areas including
the bottom land (approx. 1 to 2 mm).
54
 SSG

Series Ground Spur Gears

G G
E F E F
J J
G G

Gears
Spur
D

D
A
B
C

A
B
C

Helical
Gears
S1T S1K

Set Screw Allowable torque (Nm) Allowable torque (kgfm) Backlash Weight Catalog No.
Size J Bending strength Surface durability Bending strength Surface durability (mm) (kg) : J Series (Available-on-request)

0.016 SSG1-15

Internal
2.96 1.03 0.30 0.11 0.08~0.16

Gears
M4

5

0.015
0.019
SSG1-15 J6
SSG1-16
3.28 1.19 0.33 0.12 0.08~0.16
M4

5

0.018
0.022
SSG1-16 J6
SSG1-17
M4 5 3.60 1.36 0.37 0.14 0.08~0.16 0.022 SSG1-17 J6

Racks
M5 5 0.018 SSG1-17 J8
0.026 SSG1-18
M4 5 3.93 1.54 0.40 0.16 0.08~0.16 0.025 SSG1-18 J6
M5

5

0.022
0.030
SSG1-18 J8
SSG1-19

CP Racks
& Pinions
M4 5 4.26 1.73 0.43 0.18 0.08~0.16 0.029 SSG1-19 J6
M5

5

0.025
0.034
SSG1-19 J8
SSG1-20
M4 5
4.60 1.94 0.47 0.20 0.08~0.16
0.033 SSG1-20 J6
M5 5 0.029 SSG1-20 J8
M4

5

0.025 SSG1-20 J10**

Gears
Miter
0.035 SSG1-21
M5 5 4.94 2.14 0.50 0.22 0.08~0.16 0.033 SSG1-21 J8
M4

5

0.029
0.037
SSG1-21 J10
SSG1-22
M5 5 5.28 2.36 0.54 0.24 0.08~0.16 0.035 SSG1-22 J8
M4 5 0.031 SSG1-22 J10

Gears
Bevel
0.044 SSG1-23
M5 5
5.63 2.59 0.57 0.26 0.08~0.16
0.042 SSG1-23 J8
M4 5 0.038 SSG1-23 J10
M4

5

0.033
0.046
SSG1-23 J12
SSG1-24

Screw

Gears
M5 5 0.044 SSG1-24 J8
5.98 2.83 0.61 0.29 0.08~0.16
M4 5 0.040 SSG1-24 J10
M4

5

0.036
0.048
SSG1-24 J12
SSG1-25
M5 5 0.047 SSG1-25 J8

Products Gearboxes Gear Pair

6.33 3.07 0.65 0.31 0.08~0.16
M4 5 0.043 SSG1-25 J10

Worm
M4

5

0.038
0.051
SSG1-25 J12
SSG1-26
M5 5
6.68 3.33 0.68 0.34 0.08~0.16
0.049 SSG1-26 J8
M4 5 0.045 SSG1-26 J10
M4 5 0.041 SSG1-26 J12
Bevel

0.054 SSG1-27
M5 5
7.04 3.60 0.72 0.37 0.08~0.16
0.052 SSG1-27 J8
M4 5 0.048 SSG1-27 J10
M4

5

0.043
0.056
SSG1-27 J12
SSG1-28

Other

M5 5 0.055 SSG1-28 J8
7.39 3.89 0.75 0.40 0.08~0.16
M4 5 0.051 SSG1-28 J10
M4

5

0.046
0.073
SSG1-28 J12
SSG1-29
M5 5 0.071 SSG1-29 J8
M4 5
7.75 4.18 0.79 0.43 0.08~0.16
0.067 SSG1-29 J10
M4 5 0.062 SSG1-29 J12
M4 5 0.056 SSG1-29 J14
M4 5 0.053 SSG1-29 J15
[Caution on J series] As available-on-request products, requires a lead-time for shipping within 3 working-days (excludes the day ordered), after placing an order.
Please allow additional shipping time to get to your local distributor.
Number of products we can process for one order is 1 to 20 units. For quantities of 21 or more pieces, we need to quote price and lead time.
Keyways are made according to JIS B1301 standards, Js 9 tolerance.
Certain products which would otherwise have a very long tapped hole are conterbored to reduce the length of the tap. (Products marked with * are tap size).
Areas of products which have been re-worked will not be black oxide coated.
For products having a tapped hole, a set screw is included.
Products marked with**in their catalog numbers, have a thin gap between the keyway and the gear root surface. So, thickness must be considered when using. 55
For details, please see our web site.
 SSG Module 1
Ground Spur Gears
G
Specifications
E F
JIS grade N7 (JIS B1702-1: 1998)
Precision grade
JIS grade 3 (JIS B1702: 1976)
G
Gear teeth Standard full depth
Gears

Pressure angle 20
Spur

Material S45C
G

D
A
B
C
Heat treatment
Tooth surface induction
hardened
Tooth hardness 45 55HRC
Helical
Gears

The precision grade of J Series products is equiva- S1

lent to the value shown in the table.

Catalog No. Bore Hub dia. Pitch dia. Outside dia. Face width Hub width Total length Keyway
Module No. of teeth Shape
: J Series (Available-on-request) AH7 B C D E F G WidthDepth
SSG1-30 S1 10
Internal
Gears

SSG1-30 J10 S1K 10 4 x 1.8

SSG1-30 J12 30 S1K 12 25 30 32 8 10 18 4 x 1.8
SSG1-30 J14 S1K 14 5 x 2.3
SSG1-30 J15
SSG1-32
S1K
S1
15
10
5 x 2.3


Racks

SSG1-32 J10 S1K 10 4 x 1.8

SSG1-32 J12 32 S1K 12 25 32 34 8 10 18 4 x 1.8
SSG1-32 J14 S1K 14 5 x 2.3
SSG1-32 J15
SSG1-34
S1K
S1
15
10
5 x 2.3

CP Racks
& Pinions

SSG1-34 J10 S1K 10 4 x 1.8

SSG1-34 J12 34 S1K 12 25 34 36 8 10 18 4 x 1.8
SSG1-34 J14 S1K 14 5 x 2.3
SSG1-34 J15
SSG1-35
S1K
S1
15
10
5 x 2.3

SSG1-35 J10 S1K 10 4 x 1.8

Gears
Miter

SSG1-35 J12 35 S1K 12 25 35 37 8 10 18 4 x 1.8

SSG1-35 J14 S1K 14 5 x 2.3
SSG1-35 J15
SSG1-36
S1K
S1
15
10
5 x 2.3

SSG1-36 J10 S1K 10 4 x 1.8
SSG1-36 J12 36 S1K 12 25 36 38 8 10 18 4 x 1.8
Gears
Bevel

SSG1-36 J14 S1K 14 5 x 2.3

SSG1-36 J15
SSG1-38
S1K
S1
15
10
5 x 2.3

SSG1-38 J10 m1 S1K 10 4 x 1.8
SSG1-38 J12 S1K 12 4 x 1.8
Screw

Gears

SSG1-38 J14 38 S1K 14 30 38 40 8 10 18 5 x 2.3

SSG1-38 J15 S1K 15 5 x 2.3
SSG1-38 J16 S1K 16 5 x 2.3
SSG1-38 J18
SSG1-40
S1K
S1
18
10
6 x 2.8

Products Gearboxes Gear Pair

Worm

SSG1-40 J10 S1K 10 4 x 1.8

SSG1-40 J12 S1K 12 4 x 1.8
SSG1-40 J14 40 S1K 14 30 40 42 8 10 18 5 x 2.3
SSG1-40 J15 S1K 15 5 x 2.3
SSG1-40 J16 S1K 16 5 x 2.3
SSG1-40 J18 S1K 18 6 x 2.8
Bevel

SSG1-42 S1 10
SSG1-42 J10 S1K 10 4 x 1.8
SSG1-42 J12 S1K 12 4 x 1.8
SSG1-42 J14 42 S1K 14 30 42 44 8 10 18 5 x 2.3
SSG1-42 J15 S1K 15 5 x 2.3

Other

SSG1-42 J16 S1K 16 5 x 2.3

SSG1-42 J18
SSG1-44
S1K
S1
18
10
6 x 2.8

SSG1-44 J10 S1K 10 4 x 1.8
SSG1-44 J12 S1K 12 4 x 1.8
SSG1-44 J14 44 S1K 14 30 44 46 8 10 18 5 x 2.3
SSG1-44 J15 S1K 15 5 x 2.3
SSG1-44 J16 S1K 16 5 x 2.3
SSG1-44 J18 S1K 18 6 x 2.8
[Caution on Product Characteristics] The allowable torques shown in the table are calculated values according to the assumed usage conditions. Please see page 35 for more details.
The backlash values shown in the table are the theoretical values for the backlash in the normal direction of a pair of identical gears in mesh.
[Caution on Secondary Operations] Please readCaution on Performing Secondary Operations(Page 36) when performing modifications and/or secondary opera-
tions for safety concerns. Haguruma Kobo, the KHK's system for quick modification of KHK stock gears is also available.
Due to the gear teeth being induction hardened, no secondary operations can be performed on tooth areas including
the bottom land (approx. 1 to 2 mm).
56
 SSG

Series Ground Spur Gears

G
E F
J
G

Gears
Spur
D
A
B
C

Helical
Gears
S1K

Set Screw Allowable torque (Nm) Allowable torque (kgfm) Backlash Weight Catalog No.
Size J Bending strength Surface durability Bending strength Surface durability (mm) (kg) : J Series (Available-on-request)

0.072 SSG1-30

Internal
Gears
M4 5 0.070 SSG1-30 J10
M4 5 8.11 4.48 0.83 0.46 0.08~0.16 0.065 SSG1-30 J12
M4 5 0.059 SSG1-30 J14
M4

5

0.056
0.078
SSG1-30 J15
SSG1-32

Racks
M4 5 0.076 SSG1-32 J10
M4 5 7.37 4.27 0.75 0.43 0.08~0.16 0.071 SSG1-32 J12
M4 5 0.065 SSG1-32 J14
M4

5

0.062
0.084
SSG1-32 J15
SSG1-34

CP Racks
& Pinions
M4 5 0.083 SSG1-34 J10
M4 5 7.98 4.84 0.81 0.49 0.08~0.16 0.078 SSG1-34 J12
M4 5 0.072 SSG1-34 J14
M4

5

0.069
0.088
SSG1-34 J15
SSG1-35
M4 5 0.086 SSG1-35 J10

Gears
Miter
M4 5 8.28 5.14 0.84 0.52 0.08~0.16 0.081 SSG1-35 J12
M4 5 0.075 SSG1-35 J14
M4

5

0.072
0.091
SSG1-35 J15
SSG1-36
M4 5 0.089 SSG1-36 J10
M4 5 8.59 5.45 0.88 0.56 0.08~0.16 0.085 SSG1-36 J12

Gears
Bevel
M4 5 0.079 SSG1-36 J14
M4

5

0.075
0.12
SSG1-36 J15
SSG1-38
M4 5 0.11 SSG1-38 J10
M4 5 0.11 SSG1-38 J12

Screw

Gears
M4 5 9.21 6.10 0.94 0.62 0.08~0.16 0.10 SSG1-38 J14
M4 5 0.099 SSG1-38 J15
M4 5 0.096 SSG1-38 J16
M5

5

0.087
0.12
SSG1-38 J18
SSG1-40

Products Gearboxes Gear Pair

Worm
M4 5 0.12 SSG1-40 J10
M4 5 0.12 SSG1-40 J12
M4 5 9.83 6.79 1.00 0.69 0.08~0.16 0.11 SSG1-40 J14
M4 5 0.11 SSG1-40 J15
M4 5 0.10 SSG1-40 J16
M5 5 0.10 SSG1-40 J18
Bevel

0.13 SSG1-42
M4 5 0.13 SSG1-42 J10
M4 5 0.12 SSG1-42 J12
M4 5 10.5 7.51 1.07 0.77 0.08~0.16 0.12 SSG1-42 J14
M4 5 0.12 SSG1-42 J15

Other

M4 5 0.11 SSG1-42 J16

M5

5

0.10
0.14
SSG1-42 J18
SSG1-44
M4 5 0.14 SSG1-44 J10
M4 5 0.13 SSG1-44 J12
M4 5 11.1 8.28 1.13 0.84 0.08~0.16 0.13 SSG1-44 J14
M4 5 0.12 SSG1-44 J15
M4 5 0.12 SSG1-44 J16
M5 5 0.11 SSG1-44 J18
[Caution on J series] As available-on-request products, requires a lead-time for shipping within 3 working-days (excludes the day ordered), after placing an order.
Please allow additional shipping time to get to your local distributor.
Number of products we can process for one order is 1 to 20 units. For quantities of 21 or more pieces, we need to quote price and lead time.
Keyways are made according to JIS B1301 standards, Js 9 tolerance.
Certain products which would otherwise have a very long tapped hole are conterbored to reduce the length of the tap. (Products marked with * are tap size).
Areas of products which have been re-worked will not be black oxide coated.
For products having a tapped hole, a set screw is included.
For updated information, please see KHK Web Catalog. 57
 SSG Module 1
Ground Spur Gears
G
Specifications
E F
JIS grade N7 (JIS B1702-1: 1998)
Precision grade
JIS grade 3 (JIS B1702: 1976)
G
Gear teeth Standard full depth
Gears

Pressure angle 20
Spur

Material S45C
G

D
A
B
C
Heat treatment
Tooth surface induction
hardened
Tooth hardness 45 55HRC
Helical
Gears

The precision grade of J Series products is equiva- S1

lent to the value shown in the table.

Catalog No. Bore Hub dia. Pitch dia. Outside dia. Face width Hub width Total length Keyway
Module No. of teeth Shape
: J Series (Available-on-request) AH7 B C D E F G WidthDepth

SSG1-45 S1 10
Internal
Gears

SSG1-45 J10 S1K 10 4 x 1.8

SSG1-45 J12 S1K 12 4 x 1.8
SSG1-45 J14 45 S1K 14 30 45 47 8 10 18 5 x 2.3
SSG1-45 J15 S1K 15 5 x 2.3
SSG1-45 J16 S1K 16 5 x 2.3
SSG1-48
Racks

SSG1-45 J18 S1K 18 6 x 2.8

S1 10
SSG1-48 J10 S1K 10 4 x 1.8
SSG1-48 J12 S1K 12 4 x 1.8
SSG1-48 J14
SSG1-48 48 S1K 14 30 48 50 8 10 18 5 x 2.3
CP Racks
& Pinions

SSG1-48 J15 S1K 15 5 x 2.3

SSG1-48 J16 S1K 16 5 x 2.3
SSG1-50 J18 S1K
S1
18
12
6 x 2.8

SSG1-50 J12 S1K 12 4 x 1.8
SSG1-50 J14 S1K 14 5 x 2.3
SSG1-50 J15
Gears
Miter

SSG1-50 S1K 15 5 x 2.3

50 35 50 52 8 10 18
SSG1-50 J16 S1K 16 5 x 2.3
SSG1-50 J18 S1K 18 6 x 2.8
SSG1-50 J19 S1K 19 6 x 2.8
SSG1-55 J20 S1K
S1
20
12
6 x 2.8

Gears
Bevel

SSG1-55 J12 m1 S1K 12 4 x 1.8

SSG1-55 J14 S1K 14 5 x 2.3
SSG1-55 J15
55
S1K 15
35 55 57 8 10 18
5 x 2.3
SSG1-55 J16 S1K 16 5 x 2.3
SSG1-55 J18 S1K 18 6 x 2.8
SSG1-55
Screw
Gears

J19 S1K 19 6 x 2.8

SSG1-55
SSG1-56
J20 S1K
S1
20
12
6 x 2.8

SSG1-56 J12 S1K 12 4 x 1.8
SSG1-56 J14 S1K 14 5 x 2.3
Products Gearboxes Gear Pair

SSG1-56 J15
Worm

S1K 15 5 x 2.3
56 35 56 58 8 10 18
SSG1-56 J16 S1K 16 5 x 2.3
SSG1-56 J18 S1K 18 6 x 2.8
SSG1-56 J19 S1K 19 6 x 2.8
SSG1-56 J20 S1K 20 6 x 2.8
SSG1-60 S1 12
SSG1-60
Bevel

J12 S1K 12 4 x 1.8

SSG1-60 J14 S1K 14 5 x 2.3
SSG1-60 J15 S1K 15 5 x 2.3
SSG1-60 J16 60 S1K 16 40 60 62 8 10 18 5 x 2.3
SSG1-60 J18 S1K 18 6 x 2.8
SSG1-60
Other

J19 S1K 19 6 x 2.8

SSG1-60 J20 S1K 20 6 x 2.8
SSG1-60 J22 S1K 22 6 x 2.8
[Caution on Product Characteristics] The allowable torques shown in the table are calculated values according to the assumed usage conditions. Please see page 35 for more details.
The backlash values shown in the table are the theoretical values for the backlash in the normal direction of a pair of identical gears in mesh.
[Caution on Secondary Operations] Please readCaution on Performing Secondary Operations(Page 36) when performing modifications and/or secondary opera-
tions for safety concerns. Haguruma Kobo, the KHK's system for quick modification of KHK stock gears is also available.
Due to the gear teeth being induction hardened, no secondary operations can be performed on tooth areas including
the bottom land (approx. 1 to 2 mm).

58
 SSG

Series Ground Spur Gears

G
E F
J
G

Gears
Spur
D
A
B
C

Helical
Gears
S1K

Set Screw Allowable torque(Nm) Allowable torque(kgfm) Backlash Weight Catalog No.
Size J Bending strength Surface durability Bending strength Surface durability (mm) (kg) : J Series (Available-on-request)

0.14 SSG1-45

Internal
Gears
M4 5 0.14 SSG1-45 J10
M4 5 0.14 SSG1-45 J12
M4 5 11.4 8.67 1.16 0.88 0.08~0.16 0.13 SSG1-45 J14
M4 5 0.13 SSG1-45 J15
M4 5 0.12 SSG1-45 J16
SSG1-45

Racks
M5 5 0.12 J18
0.16 SSG1-48
M4 5 0.16 SSG1-48 J10
M4 5 0.15 SSG1-48 J12
M4 5 12.3 9.92 1.26 1.01 0.08~0.16 0.14 SSG1-48 J14
SSG1-48

CP Racks
& Pinions
M4 5 0.14 SSG1-48 J15
M4 5 0.14 SSG1-48 J16
M5

5

0.13
0.18
SSG1-50 J18
M4 5 0.18 SSG1-50 J12
M4 5 0.17 SSG1-50 J14
SSG1-50 J15

Gears
Miter
M4 5 0.17 SSG1-50
13.0 10.8 1.32 1.10 0.08~0.16
M4 5 0.17 SSG1-50 J16
M5 5 0.16 SSG1-50 J18
M5 5 0.15 SSG1-50 J19
M5

5

0.15
0.21
SSG1-55 J20

Gears
Bevel
M4 5 0.21 SSG1-55 J12
M4 5 0.20 SSG1-55 J14
M4 5
14.6 13.2 1.48 1.34 0.10~0.18
0.20 SSG1-55 J15
M4 5 0.19 SSG1-55 J16
M5 5 0.18 SSG1-55 J18
SSG1-55

Screw
Gears
M5 5 0.18 J19
M5

5

0.18
0.21
SSG1-55
SSG1-56
J20

M4 5 0.21 SSG1-56 J12

M4 5 0.21 SSG1-56 J14

Products Gearboxes Gear Pair

5 0.20 SSG1-56 J15

Worm
M4
14.9 13.7 1.52 1.40 0.10~0.18
M4 5 0.20 SSG1-56 J16
M5 5 0.19 SSG1-56 J18
M5 5 0.19 SSG1-56 J19
M5 5 0.18 SSG1-56 J20
0.26 SSG1-60
SSG1-60
Bevel

M4 5 0.26 J12
M4 5 0.25 SSG1-60 J14
M4 5 0.25 SSG1-60 J15
M4 5 16.2 15.8 1.65 1.61 0.10~0.18 0.24 SSG1-60 J16
M5 5 0.24 SSG1-60 J18
SSG1-60
Other

M5 5 0.23 J19
M5 5 0.23 SSG1-60 J20
M5 5 0.22 SSG1-60 J22
[Caution on J series] As available-on-request products, requires a lead-time for shipping within 3 working-days (excludes the day ordered), after placing an order.
Please allow additional shipping time to get to your local distributor.
Number of products we can process for one order is 1 to 20 units. For quantities of 21 or more pieces, we need to quote price and lead time.
Keyways are made according to JIS B1301 standards, Js 9 tolerance.
Certain products which would otherwise have a very long tapped hole are conterbored to reduce the length of the tap. (Products marked with * are tap size).
Areas of products which have been re-worked will not be black oxide coated.
For products having a tapped hole, a set screw is included.

For updated information, please see KHK Web Catalog. 59

 SSG Module 1
Ground Spur Gears
G
Specifications
E F
JIS grade N7 (JIS B1702-1: 1998)
Precision grade
JIS grade 3 (JIS B1702: 1976)
G
Gear teeth Standard full depth
Gears

Pressure angle 20
Spur

Material S45C
G

D
A
B
C
Heat treatment
Tooth surface induction
hardened
Tooth hardness 45 55HRC
Helical
Gears

The precision grade of J Series products is equiva- S1

lent to the value shown in the table.

Catalog No. Bore Hub dia. Pitch dia. Outside dia. Face width Hub width Total length Keyway
Module No. of teeth Shape
: J Series (Available-on-request) AH7 B C D E F G WidthDepth

SSG1-64 S1 12
Internal
Gears

SSG1-64 J12 S1K 12 4 x 1.8

SSG1-64 J14 S1K 14 5 x 2.3
SSG1-64 J15 S1K 15 5 x 2.3
SSG1-64 J16 64 S1K 16 40 64 66 8 10 18 5 x 2.3
SSG1-64 J18 S1K 18 6 x 2.8
SSG1-64
Racks

J19 S1K 19 6 x 2.8

SSG1-64 J20 S1K 20 6 x 2.8
SSG1-70
SSG1-64 J22 S1K 22 6 x 2.8
S1 12
SSG1-70 J12 S1K 12 4 x 1.8
CP Racks
& Pinions

SSG1-70 J14 S1K 14 5 x 2.3

SSG1-70 J15 S1K 15 5 x 2.3
SSG1-70 J16 70 S1K 16 40 70 72 8 10 18 5 x 2.3
SSG1-70 J18 S1K 18 6 x 2.8
SSG1-70 J19 S1K 19 6 x 2.8
SSG1-70 J20 S1K 20 6 x 2.8
SSG1-70
Gears

J22 S1K 22 6 x 2.8

Miter

SSG1-75 S1 12
SSG1-75 J12 S1K 12 4 x 1.8
SSG1-75 J14 S1K 14 5 x 2.3
SSG1-75 J15
SSG1-75 S1K 15 5 x 2.3
SSG1-75 J16 75 S1K 16 40 75 77 8 10 18 5 x 2.3
Gears
Bevel

SSG1-75 J18 m1 S1K 18 6 x 2.8

SSG1-75 J19 S1K 19 6 x 2.8
SSG1-75 J20 S1K 20 6 x 2.8
SSG1-80 J22 S1K 22 6 x 2.8
S1 15
Screw
Gears

SSG1-80 J15 S1K 15 5 x 2.3

SSG1-80 J16 S1K 16 5 x 2.3
SSG1-80 J18
SSG1-80 S1K 18 6 x 2.8
SSG1-80 J19 80
S1K 19
50 80 82 8 10 18
6 x 2.8
SSG1-80 J20 S1K 20 6 x 2.8
Products Gearboxes Gear Pair

SSG1-80 J22 S1K 22 6 x 2.8

Worm

SSG1-80 J25 S1K 25 8 x 3.3

SSG1-80 J28 S1K 28 8 x 3.3
SSG1-90 J30 S1K 30 8 x 3.3
S1 15
SSG1-90 J15 S1K 15 5 x 2.3
SSG1-90 J16
Bevel

SSG1-90 S1K 16 5 x 2.3

SSG1-90 J18 S1K 18 6 x 2.8
SSG1-90 J19 90
S1K 19
50 90 92 8 10 18
6 x 2.8
SSG1-90 J20 S1K 20 6 x 2.8
SSG1-90 J22 S1K 22 6 x 2.8
SSG1-90 J25
Other

S1K 25 8 x 3.3
SSG1-90 J28 S1K 28 8 x 3.3
J30 S1K 30 8 x 3.3
[Caution on Product Characteristics] The allowable torques shown in the table are calculated values according to the assumed usage conditions. Please see page 35 for more details.
The backlash values shown in the table are the theoretical values for the backlash in the normal direction of a pair of identical gears in mesh.
[Caution on Secondary Operations] Please readCaution on Performing Secondary Operations(Page 36) when performing modifications and/or secondary opera-
tions for safety concerns. Haguruma Kobo, the KHK's system for quick modification of KHK stock gears is also available.
Due to the gear teeth being induction hardened, no secondary operations can be performed on tooth areas including
the bottom land (approx. 1 to 2 mm).

60
 SSG

Series Ground Spur Gears

G
E F
J
G

Gears
Spur
D
A
B
C

Helical
Gears
S1K

Set Screw Allowable torque(Nm) Allowable torque(kgfm) Backlash Weight Catalog No.
Size J Bending strength Surface durability Bending strength Surface durability (mm) (kg) : J Series (Available-on-request)

0.28 SSG1-64

Internal
Gears
M4 5 0.28 SSG1-64 J12
M4 5 0.28 SSG1-64 J14
M4 5 0.27 SSG1-64 J15
M4 5 17.4 18.1 1.78 1.84 0.10~0.18 0.27 SSG1-64 J16
M5 5 0.26 SSG1-64 J18
SSG1-64

Racks
M5 5 0.26 J19
M5 5 0.25 SSG1-64 J20
M5 5 0.24 SSG1-64 J22
0.32 SSG1-70
M4 5 0.32 SSG1-70 J12

CP Racks
& Pinions
M4 5 0.32 SSG1-70 J14
M4 5 0.31 SSG1-70 J15
M4 5 19.4 21.8 1.97 2.22 0.10~0.18 0.31 SSG1-70 J16
M5 5 0.30 SSG1-70 J18
M5 5 0.30 SSG1-70 J19
M5 5 0.29 SSG1-70 J20
SSG1-70

Gears
M5 5 0.28 J22

Miter
0.36 SSG1-75
M4 5 0.36 SSG1-75 J12
M4 5 0.35 SSG1-75 J14
M4 5 0.35 SSG1-75 J15
SSG1-75
M4 5 21.0 25.2 2.14 2.57 0.10~0.18 0.34 SSG1-75 J16

Gears
Bevel
M5 5 0.34 SSG1-75 J18
M5 5 0.33 SSG1-75 J19
M5 5 0.33 SSG1-75 J20
M5 5 0.32 SSG1-80 J22
0.44

Screw
Gears
M4* 5 0.44 SSG1-80 J15
M4* 5 0.43 SSG1-80 J16
M5 5 0.43 SSG1-80 J18
SSG1-80
M5 5
22.6 28.8 2.30 2.94 0.10~0.18
0.42 SSG1-80 J19
M5 5 0.42 SSG1-80 J20

Products Gearboxes Gear Pair

M5 5 0.41 SSG1-80 J22
Worm
M6 5 0.39 SSG1-80 J25
M6 5 0.38 SSG1-80 J28
M6 5 0.36 SSG1-90 J30
0.53
M4* 5 0.52 SSG1-90 J15
SSG1-90 J16
Bevel

M4* 5 0.52 SSG1-90

M5 5 0.51 SSG1-90 J18
M5 5
25.8 36.9 2.64 3.77 0.10~0.18
0.51 SSG1-90 J19
M5 5 0.50 SSG1-90 J20
M5 5 0.49 SSG1-90 J22
SSG1-90 J25
Other

M6 5 0.48
M6 5 0.46 SSG1-90 J28
M6 5 0.45 J30
[Caution on J series] As available-on-request products, requires a lead-time for shipping within 3 working-days (excludes the day ordered), after placing an order.
Please allow additional shipping time to get to your local distributor.
Number of products we can process for one order is 1 to 20 units. For quantities of 21 or more pieces, we need to quote price and lead time.
Keyways are made according to JIS B1301 standards, Js 9 tolerance.
Certain products which would otherwise have a very long tapped hole are conterbored to reduce the length of the tap. (Products marked with * are tap size).
Areas of products which have been re-worked will not be black oxide coated.
For products having a tapped hole, a set screw is included.

For updated information, please see KHK Web Catalog. 61

 SSG Module 1
Ground Spur Gears
G
Specifications
E F
JIS grade N7 (JIS B1702-1: 1998)
Precision grade
JIS grade 3 (JIS B1702: 1976)
G
Gear teeth Standard full depth
Gears

Pressure angle 20
Spur

Material S45C
G

D
A
B
C
Heat treatment
Tooth surface induction
hardened
Tooth hardness 45 55HRC
Helical
Gears

The precision grade of J Series products is equiva- S1

lent to the value shown in the table.

Catalog No. Bore Hub dia. Pitch dia. Outside dia. Face width Hub width Total length Keyway
Module No. of teeth Shape
:J Series (Available-on-request) AH7 B C D E F G WidthDepth

SSG1-100 S1 15
Internal
Gears

SSG1-100 J15 S1K 15 5 x 2.3

SSG1-100 J16 S1K 16 5 x 2.3
SSG1-100 J18 S1K 18 6 x 2.8
SSG1-100 J19
100
S1K 19
50 100 102 8 10 18
6 x 2.8
SSG1-100 J20 S1K 20 6 x 2.8
SSG1-100
Racks

J22 S1K 22 6 x 2.8

SSG1-100 J25 S1K 25 8 x 3.3
SSG1-100 J28 S1K 28 8 x 3.3
SSG1-100 J30
m1
S1K 30 8 x 3.3
SSG1-120 S1 15
CP Racks
& Pinions

SSG1-120 J15 S1K 15 5 x 2.3

SSG1-120 J16 S1K 16 5 x 2.3
SSG1-120 J18 S1K 18 6 x 2.8
SSG1-120 J19
120
S1K 19
50 120 122 8 10 18
6 x 2.8
SSG1-120 J20 S1K 20 6 x 2.8
SSG1-120 J22 S1K 22 6 x 2.8
SSG1-120
Gears

J25 S1K 25 8 x 3.3

Miter

SSG1-120 J28 S1K 28 8 x 3.3

SSG1-120 J30 S1K 30 8 x 3.3
[Caution on Product Characteristics] The allowable torques shown in the table are calculated values according to the assumed usage conditions. Please see page 35 for more details.
The backlash values shown in the table are the theoretical values for the backlash in the normal direction of a pair of identical gears in mesh.
Gears
Bevel

[Caution on Secondary Operations] Please readCaution on Performing Secondary Operations(Page 36) when performing modifications and/or secondary opera-
tions for safety concerns. Haguruma Kobo, the KHK's system for quick modification of KHK stock gears is also available.
Due to the gear teeth being induction hardened, no secondary operations can be performed on tooth areas including
the bottom land (approx. 1 to 2 mm).
Screw
Gears
Products Gearboxes Gear Pair
Other Bevel Worm

62
 SSG

Series Ground Spur Gears

G
E F
J
G

Gears
Spur
D
A
B
C

Helical
Gears
S1K

Set Screw Allowable torque(Nm) Allowable torque(kgfm) Backlash Weight Catalog No.
Size J Bending strength Surface durability Bending strength Surface durability (mm) (kg) : J Series (Available-on-request)

0.62 SSG1-100

Internal
Gears
M4* 5 0.62 SSG1-100 J15
M4* 5 0.61 SSG1-100 J16
M5 5 0.61 SSG1-100 J18
M5 5
26.9 42.5 2.74 4.34 0.10~0.18
0.60 SSG1-100 J19
M5 5 0.60 SSG1-100 J20
SSG1-100

Racks
M5 5 0.59 J22
M6 5 0.57 SSG1-100 J25
M6 5 0.55 SSG1-100 J28
M6 5 0.54 SSG1-100 J30
0.84 SSG1-120

CP Racks
& Pinions
M4* 5 0.83 SSG1-120 J15
M4* 5 0.83 SSG1-120 J16
M5 5 0.82 SSG1-120 J18
M5 5
32.9 62.5 3.36 6.37 0.12~0.20
0.82 SSG1-120 J19
M5 5 0.81 SSG1-120 J20
M5 5 0.81 SSG1-120 J22
SSG1-120

Gears
M6 5 0.79 J25

Miter
M6 5 0.77 SSG1-120 J28
M6 5 0.76 SSG1-120 J30
[Caution on J series] As available-on-request products, requires a lead-time for shipping within 3 working-days (excludes the day ordered), after placing an order.
Please allow additional shipping time to get to your local distributor.

Gears
Number of products we can process for one order is 1 to 20 units. For quantities of 21 or more pieces, we need to quote price and lead time.

Bevel
Keyways are made according to JIS B1301 standards, Js 9 tolerance.
Certain products which would otherwise have a very long tapped hole are conterbored to reduce the length of the tap. (Products marked with * are tap size).
Areas of products which have been re-worked will not be black oxide coated.
For products having a tapped hole, a set screw is included.

Screw
Gears
Products Gearboxes Gear Pair
Other Bevel Worm

For updated information, please see KHK Web Catalog. 63

 SSG Module 1.5
Ground Spur Gears
G
Specifications
E F
JIS grade N7 (JIS B1702-1: 1998)
Precision grade
JIS grade 3 (JIS B1702: 1976)
G
Gear teeth Standard full depth
Gears

Pressure angle 20
Spur

Material S45C
G

D
A
B
C
Heat treatment
Tooth surface induction
hardened
Tooth hardness 45 55HRC
Helical
Gears

The precision grade of J Series products is equiva- S1

lent to the value shown in the table.

Catalog No. Bore Hub dia. Pitch dia. Outside dia. Face width Hub width Total length Keyway
Module No. of teeth Shape
: J Series (Available-on-request) AH7 B C D E F G WidthDepth
SSG1.5-14 S1 10
Internal

14 17 21 24 15 14 29
Gears

SSG1.5-14 J10
SSG1.5-15
S1T2
S1
10
10


15 18 22.5 25.5 15 14 29
SSG1.5-15 J10**
SSG1.5-16
S1K
S1
10
10
4 x 1.8

SSG1.5-16 J10 16 S1K 10 20 24 27 15 14 29 4 x 1.8

Racks

SSG1.5-16 J12** S1K 12 4 x 1.8

SSG1.5-17 S1 10
SSG1.5-17 J10 17 S1K 10 21 25.5 28.5 15 14 29 4 x 1.8
SSG1.5-17 J12
SSG1.5-18
S1K
S1
12
10
4 x 1.8

CP Racks
& Pinions

SSG1.5-18 J10 18 S1K 10 22 27 30 15 14 29 4 x 1.8

SSG1.5-18 J12
SSG1.5-19
S1K
S1
12
10
4 x 1.8

SSG1.5-19 J10 19 S1K 10 23 28.5 31.5 15 14 29 4 x 1.8
SSG1.5-19 J12
SSG1.5-20
S1K
S1
12
10
4 x 1.8


Gears
Miter

SSG1.5-20 J10 S1K 10 4 x 1.8

20 24 30 33 15 14 29
SSG1.5-20 J12 S1K 12 4 x 1.8
SSG1.5-20 J14
SSG1.5-21
S1K
S1
14
10
5 x 2.3

SSG1.5-21 J10 S1K 10 4 x 1.8
SSG1.5-21 J12 21 S1K 12 25 31.5 34.5 15 14 29 4 x 1.8
Gears
Bevel

SSG1.5-21 J14 S1K 14 5 x 2.3

SSG1.5-21 J15
SSG1.5-22 m1.5
S1K
S1
15
12
5 x 2.3

SSG1.5-22 J12
22
S1K 12
26 33 36 15 14 29
4 x 1.8
SSG1.5-22 J14 S1K 14 5 x 2.3

Screw
Gears

SSG1.5-22 J15 S1K 15 5 x 2.3

SSG1.5-23 S1 12
SSG1.5-23 J12 S1K 12 4 x 1.8
SSG1.5-23 J14 23 S1K 14 27 34.5 37.5 15 14 29 5 x 2.3
SSG1.5-23 J15 S1K 15 5 x 2.3
Products Gearboxes Gear Pair

SSG1.5-23 J16 S1K 16 5 x 2.3

Worm

SSG1.5-24 S1 12
SSG1.5-24 J12 S1K 12 4 x 1.8
SSG1.5-24 J14 24 S1K 14 28 36 39 15 14 29 5 x 2.3
SSG1.5-24 J15 S1K 15 5 x 2.3
SSG1.5-24 J16 S1K 16 5 x 2.3
Bevel

SSG1.5-25 S1 12
SSG1.5-25 J12 S1K 12 4 x 1.8
SSG1.5-25 J14
25
S1K 14
30 37.5 40.5 15 14 29
5 x 2.3
SSG1.5-25 J15 S1K 15 5 x 2.3
SSG1.5-25 J16 S1K 16 5 x 2.3

Other

SSG1.5-25 J18 S1K 18 6 x 2.8

SSG1.5-26 S1 12
SSG1.5-26 J12 S1K 12 4 x 1.8
SSG1.5-26 J14
26
S1K 14
32 39 42 15 14 29
5 x 2.3
SSG1.5-26 J15 S1K 15 5 x 2.3
SSG1.5-26 J16 S1K 16 5 x 2.3
SSG1.5-26 J18 S1K 18 6 x 2.8
[Caution on Product Characteristics] The allowable torques shown in the table are calculated values according to the assumed usage conditions. Please see page 35 for more details.
The backlash values shown in the table are the theoretical values for the backlash in the normal direction of a pair of identical gears in mesh.
[Caution on Secondary Operations] Please readCaution on Performing Secondary Operations(Page 36) when performing modifications and/or secondary opera-
tions for safety concerns. Haguruma Kobo, the KHK's system for quick modification of KHK stock gears is also available.
Due to the gear teeth being induction hardened, no secondary operations can be performed on tooth areas including
the bottom land (approx. 1 to 2 mm).

64