Iodometry

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 4

Iodometry

From Wikipedia, the free encyclopedia


Iodometry, also known as iodometric titration, is a method of volumetric chemical
analysis, a redox titration where the appearance or disappearance of
elementary iodine indicates the end point.
Note that iodometry involves indirect titration of iodine liberated by reaction with the
analyte , whereas iodimetry involves direct titration using iodine as the titrant.

Color of iodometric titration mixture before (left) and after (right) the end point

Contents

1Basic principles

2Applications

o 2.1Determination of hydrogensulfites and sulfites

o 2.2Determination of sulfides and hydrogensulfides

o 2.3Determination of hexacyanoferrate(III)

3References

Basic principles[edit]
Iodometry is commonly used to analyse the concentration of oxidizing agents in
water samples, such as oxygen saturation in ecological studies or active chlorine in
swimming pool water analysis. To a known volume of sample, an excess but known
amount of iodide is added, which the oxidizing agents oxidizes iodide
to iodine.Iodine dissolves in the iodide-containing solution to give triiodide ions,
which have a dark brown color.
The triiodide ion solution is then titrated against standard thiosulfate solution to give
iodide again using starch indicator:
I3 + 2 e 3 I (Eo = + 0.5355 V)
Together with reduction potential of thiosulfate: [1]
S4O62 + 2 e 2 S2O32 (Eo = + 0.08 V)
The overall reaction is thus:
I3 + 2 S2O32 S4O62 + 3 I (Eo = + 0.4555 V)
For simplicity, the equations will usually be written in terms of aqueous molecular
iodine rather than the triiodide ion, as the iodide ion did not participate in the reaction
in terms of mole ratio analysis.
The disappearance of deep blue color due to the decomposition of the iodine-
starch clathrate marks the end point
The reducing agent used does not necessarily need to be thiosulfate; stannous
chloride, sulfites, sulfides, arsenic(III), and antimony(III) are commonly used
alternatives.[2] At higher pH (> 8)) At low pH would also react with the
thiosulfate:: :S2O32 + 2 H+ SO2 + S + H2O
Some reactions involving certain reductants are reversible at certain pH, thus the pH
of the sample solution should be carefully adjusted before the performing the
analysis. For example, the reaction:
H3AsO3 + I2 + H2O H3AsO4 + 2 H+ + 2 I
is reversible at pH < 4.
The volatility of iodine is also a source of error for the titration, this can be effectively
prevented by ensuring an excess iodide is present and cooling the titration mixture.
Strong light, nitrite and copper ions catalyzes the conversion of iodide to iodine, so
these should be removed prior to the addition of iodide to the sample.
For prolonged titrations, it is advised to add dry ice to the titration mixture to displace
air from the erlenmeyer flask so as to prevent the aerial oxidation of iodide to iodine.
Standard iodine solution is prepared from potassium iodate and potassium iodide,
which are both primary standards):
IO3 + 8 I + 6 H+ 3 I3 + 3 H2O

Iodine standard solution, sealed in an ampoule for iodometric analysis

Applications[edit]
Iodometry in its many variations is extremely useful in volumetric analysis. Examples
include the determination of copper(II), chlorate, Hydrogen peroxide, and dissolved
oxygen:
2 Cu2+ + 4 I 2 CuI + I2
6 H+ + ClO3 + 6 I 3 I2 + Cl + 3 H2O
2 H+ + H2O2 + 2 I I2 + 2 H2O
2 H2O + 4 Mn(OH)2 + O2 4 Mn(OH)3
2 Mn3+ + 2 I I2 + 2 Mn2+
Available chlorine refers to chlorine liberated by the action of dilute acids
onhypochlorite. Iodometry is commonly employed to determine the active amount of
hypochlorite in bleach responsible for the bleaching action. In this method, excess
but known amount of iodide is added to known volume of sample, in which only the
active (electrophilic) can oxidize iodide to iodine. The iodine content and thus the
active chlorine content can be determined with iodometry.[3]
The determination of arsenic(V) is the reverse of the standardization of iodine
solution with sodium arsenite, where a known and excess amount of iodide is added
to the sample:
As2O5 + 4 H+ + 4 I As2O3 + 2 I2 + 2 H2O
For analysis of antimony(V), some tartaric acid is added to solubilize the
antimony(III) product.[2]
Determination of hydrogensulfites and sulfites[edit]
Sulfites and hydrogensulfites reduce iodine readily in acidic medium to iodide. Thus
when a diluted but excess amount of standard iodine solution is added to known
volume of sample, the sulfurous acid and sulfites present reduces iodine
quantitatively:
SO32 + I2 + H2O SO42 + 2 H+ + 2 I
HSO3 + I2 + H2O SO42 + 3 H+ + 2 I
Determination of sulfides and hydrogensulfides[edit]
Although the sulfide content in sample can be determined straightforwardly as
described for sulfites, the results are often poor and inaccurate. A better, alternative
method with higher accuracy is available, which involves the addition of excess but
known volume of standard sodium arsenite solution to the sample, during
whicharsenic trisulfide is precipitated:
As2O3 + 3 H2S As2S3 + 3 H2O
The excess arsenic trioxide is then determined by titrating against standard iodine
solution using starch indicator. Note that for the best results, the sulfide solution must
be dilute with the sulfide concentration not greater than 0.01 M. [2]
Determination of hexacyanoferrate(III)[edit]
When iodide is added to a solution of hexacyanoferrate(III), the following equilibrium
exists:
2 [Fe(CN)6]3 + 2 I 2 [Fe(CN)6]4 + I2
Under strongly acidic solution,
the above equilibrium lies far to the right hand side, but is reversed in almost neutral
solution. This makes analysis of hexacyanoferrate (III) troublesome as the iodide and
thiosulfate decomposes in strongly acidic medium. To drive the reaction to
completion, an excess amount ofzinc salt can be added to the reaction mixture
containing potassium ions, which precipitates the hexacyanoferrate(II) ion
quantitatively:
2 [Fe(CN)6]3 + 2 I + 2 K+ + 2 Zn2+ 2 KZn[Fe(CN)6] + I2
The precipitation occurs in slightly acidic medium, thus avoids the problem of
decomposition of iodide and thiosulfate in strongly acidic medium, and the
hexacyanoferrate(III) can be determined by iodometry as usual. [2]

You might also like