Scribd
Upload
238 views2 pages

Computations: Top Chord (75 X 75 X 6mm)

This document contains computations for the materials needed to construct a truss. It calculates the lengths, pieces, and quantities of angle bars, plates, bolts, purlins, channels and other structural members. Key materials include: - 50 x 50 x 6mm angle bars: 19 pieces x 6m - 75 x 75 x 6mm angle bars: 26 pieces x 6m - Angular base plates: 48 pieces - Gusset plates: 1.6 sqm of 6mm plate, 3 sqm of 10mm plate - Buckle plate: 0.6 sqm of 12mm plate - Purlins: 47 pieces of 150 x 65 x 20 x 2mm x 6

Uploaded by

shiela mae
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
238 views2 pages

Computations: Top Chord (75 X 75 X 6mm)

This document contains computations for the materials needed to construct a truss. It calculates the lengths, pieces, and quantities of angle bars, plates, bolts, purlins, channels and other structural members. Key materials include: - 50 x 50 x 6mm angle bars: 19 pieces x 6m - 75 x 75 x 6mm angle bars: 26 pieces x 6m - Angular base plates: 48 pieces - Gusset plates: 1.6 sqm of 6mm plate, 3 sqm of 10mm plate - Buckle plate: 0.6 sqm of 12mm plate - Purlins: 47 pieces of 150 x 65 x 20 x 2mm x 6

Uploaded by

shiela mae
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

COMPUTATIONS

Top Chord (75 x 75 x 6mm)


2 x 4 = 8 pcs 5.494m
2 x 4 = 8 pcs 5.162m
Using 6m length: 6 / 5.494 = 1 pc can be produced
8 / 1 = 8 pcs of 6m length
Using 6m length: 6 / 5.162m = 1 pc can be produced
8 / 1 = 8 pcs of 6m length

Bottom Chord (75 x 75 x 6mm)


2 x 4 = 8 pcs 7.32m
8 x 7.32 = 58.56m
58.56 / 6 = 9.75, say 10 pcs of 6m length(can be spliced)

King Post (50 x 50 x 6mm)


2 x 4 = 8 pcs 1.555m
Using 6m length: 6 / 1.555 = 3 pcs can be produced
8 / 3 = 2.67 or 3 pcs of 6m length with 3 pcs of 1.335m excess

Web Members (50 x 50 x 6mm)


Web Member 1
2 x 2 x 4 = 16 pcs 1.85m
Using 6m length: 6 / 1.85 = 3 pcs can be produced
16 / 3 = 5.33 or 6 pcs of 6m length with 5 pcs of 0.45m and 1 pc of 4.15m excess

Web Member 2
2 x 2 x 4 = 16 pcs 1.4m
Using 6m length: 6 / 1.0 = 4 pcs can be produced
16 / 4 = 4 pcs of 6m length with 4 pcs of 0.4m excess

Web Member 3
2 x 2 x 4 = 16 pcs 1.0m
Using 1.335m excess from King Post: 1.335 / 1.0 = 1 pc can be produced
Using 4.15 excess from Web Member 1: 4.15 / 1.0 = 4 pcs can be produced with 1 pc 0.15m
excess
16 total pcs 5 pcs cut from excess = 11 pcs remaining
Using 6m length: 6 / 1.0 = 6 pcs can be produced
11 / 6 = 1.83 or 2 pcs of 6m length with 1 pc of 1.0m excess

Web Member 4
2 x 2 x 4 = 16 pcs 0.5m
Using 1.0m excess from Web Member 3: 1 / 0.5 = 2 pcs can be produced
16 total pcs 2 pcs cut from excess = 14 pcs remaining
Using 6m length: 6 / 0.5 = 12 pcs can be produced
14 / 12 = 1.167 or 2 pcs of 6m length with 1 pc of 5.0m excess

Eaves (50 x 50 x 6mm)


2 x 2 x 4 = 16 pcs 1.0m
Using 5.0m excess from Web Member 4: 5 / 1.0 = 5 pcs can be produced
16 total pcs 5 pcs cut from excess = 11 pcs remaining
Using 6m length: 6 / 1.0 = 6 pcs can be produced
11 / 6 = 1.83 or 2 pcs of 6m length with 1 pc of 1.0m excess

Summary of Angle Bars


50 x 50 x 6mm x 6m 19 pcs
75 x 75 x 6mm x 6m 26 pcs

Angular Base Plate (100 x 100 x 6mm)


12 x 2 x 2 = 48 pcs

Gusset Plate (6mm)


0.3m x 0.4m x 8 = 0.96 sq. m.
0.25m x 0.2m x 8 = 0.4 sq. m.
0.22m x 0.1m x 8 = 0.176sq m.
Total = 0.96 + 0.4 + 0.176 = 1.536 sq. m. say 1.6 sq. m.

Gusset Plate (10mm)


0.25m x 0.15m x 8 = 0.3 sq. m.
0.3m x 0.3m x 8 = 0.72 sq. m.
0.25m x 0.25m x 16 = 1 sq. m.
0.25m x 0.15m x 4 = 0.15 sq. m.
0.4m x 0.5m x 4 = 0.8 sq. m.
Total = 0.3 + 0.72 + 1 + 0.15 + 0.8 = 2.97 sq. m. say 3 sq. m.

Buckle Plate (12mm)


0.1m x 0.15m x 40 = 0.6 sq. m.

Clip Angle Bar (65x65x6x700mm x 6m)


0.15m x 6 x 2 = 1.8m or 1 pc of 6m length

Clip Angle Bar (75x75x6x130mm x 6m)


0.15m x 6 x 22 = 19.8m
Using 6m length: 19.8 / 6 = 3.3 say 4 pcs of 6m length

LC Purlin (150 x 65 x 20 x 2mm)


23.3 x 12 = 279.6m
Using 6m length: 279.6 / 6 = 46.6 say 47 pcs of 6m length

LC Channel (Steel Fascia) (255 x 90 x 253mm)


23.3 x 2 = 46.6m
Using 6m length: 46.6 / 6 = 7.77 say 8 pcs of 6m length

Sag Rod (12mm)


4.83 + 5.16 = 9.99m
9.99 x 10 = 99.9m say 100m

Cross Bracing (16mm)


2 x 10 = 20 sets

Anchor Bolts (16mmx300mm)


4 x 8 = 32 pcs

Anchor Bolts (12mmx150mm)


4 x 4 = 16 pcs

You might also like