Scribd
Upload
77 views

Digital Signal Processing

This document is an examination for a Digital Signal Processing course covering 5 units: 1. Linear Time Invariant systems and their realization structures. 2. Convolution using the Discrete Fourier Transform. 3. Design of analog Butterworth filters using bilinear transformation. 4. Design of lowpass FIR filters using frequency sampling and windowing. 5. Digital signal processors and their applications in spectrum analysis and filtering. The examination contains 10 questions, with students required to answer 1 question from each unit. Questions involve tasks like determining filter structures, performing various types of convolution, designing analog and digital filters, and explaining digital signal processing concepts.

Uploaded by

SreedeviRajitha
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
77 views

Digital Signal Processing

This document is an examination for a Digital Signal Processing course covering 5 units: 1. Linear Time Invariant systems and their realization structures. 2. Convolution using the Discrete Fourier Transform. 3. Design of analog Butterworth filters using bilinear transformation. 4. Design of lowpass FIR filters using frequency sampling and windowing. 5. Digital signal processors and their applications in spectrum analysis and filtering. The examination contains 10 questions, with students required to answer 1 question from each unit. Questions involve tasks like determining filter structures, performing various types of convolution, designing analog and digital filters, and explaining digital signal processing concepts.

Uploaded by

SreedeviRajitha
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

[April-14]

[EUREC-602]
B.Tech. Degree Examination
Electronics & Communication Engineering
VI SEMESTER
DIGITAL SIGNAL PROCESSING
(Effective from the admitted batch 200708)
Time: 3 Hours Max.Marks: 60
-------------------------------------------------------------------------------------
Instructions: Each Unit carries 12 marks.
Answer all units choosing one question from each unit.
All parts of the unit must be answered in one place only.
Figures in the right hand margin indicate marks allotted.
---------------------------------------------------------------------------------------------
UNIT-I
1. a) An LTI system is described by the equation
y[n] + 2 y[n 1] y[n 2] = x[n]. Determine the cascade and
parallel realization structures of the system 12
OR
2. Find the digital network in direct and transposed form for a system
described by the difference equation:
y [ n=
] x [ n] 0.3x[n 1] 0.7 x[n 2] + 0.6 y[n 1] + 0.8 y[n 2] 12
UNIT-II
3. a) Find the linear convolution of the sequences x[n]={1,0,2} and
h[n]={1,1} using DFT 6
b) Describe the circular convolution of two sequences having same
length 6
OR
4. a) Perform the linear convolution of the following sequences by
overlap-add method:
x[n]={1,-2,3,2,-3,4,3,-4} and h[n]={1,2,-1} 6
b) Find the four point DFT of the sequence x[n]={2,1,4,3} by
decimation in time FFT algorithm 6
UNIT-III
5. Design a Butterworth low pass filter using bilinear transformation
method to meet the following specifications:
Pass band attenuation 1 dB; Pass band edge=4 kHz; Stop band
edge=8 kHz; Stop band attenuation 40 dB; Sampling rate=24 kHz. 12
OR
6. Design a digital Butterworth filter satisfying the following
specifications:
0.707|H()|1; 00.5 and |H()|0.2; 0.75 with
sampling period T=1s. Apply impulse invariant transformation 12
UNIT-IV
7. Explain the design procedure for the design of lowpass FIR filter
using frequency sampling and windowing techniques. Given that
the impulse response of an FIR filter
h[ n ] =
{0, 0.0127, 0.0248, 0.0638, 0.2761, 0.4, 0.2761, 0.0638, 0.0248, 0.0127, 0}.
If the angular frequency =0.2, then find its transfer function 12
OR

( )
8. Design a filter with H d e j= e 3 j , 0.25 0.25 ; and
H d (=
e j ) 0, 0.25 . Use Hamming window with N=7 12
UNIT-V
9. Write the following:
a) Fixed point digital processors b) Hardware multiplier 12
OR
10. Explain the following:
a) Floating point digital processors 6
b) Spectrum analysis and filtering 6

[04/VI S/114]

You might also like