Annexure-1

USIM Technical Specifications

1. General

1.1 This specification along with the Anbnex-1 covers GSM/3GPP Smart
Cards equipped with 128K memory with SIM and USIM and STK/USAT
Features for Post-paid, Pre-paid, Telecharge (Top-up charging) and
WCDMA (3G) Mobile Service,

2. Scope

2.1 This part of the specification gives the technical requirements of the
goods to be supplied under this tender.

3. Standard

3.1 All USIM Standards i.e. ETSI TS 102.221, ETSI TS 102.223, ETSI TS
102.241, ETSI TS 102.412, 3GPP TS 31.102 v6.80, 3GPP TS 31.101
v6.5.1, 3GPP TS 31.111 v6.40

3.2 The application shall support at least but not limited to the following
Standards.
GSM 03.19
GSM 11.11
GSM 11.14
GSM 23.038
Java 2.1.1 or latest
4. Authentication

4.1 GSM Authentication: Milenage & conversion Function, Comp 128 V2.

4.2 3G Authentication: Milenage

5. PIN and PUK

5.1 The USIM card shall have the security of PIN1, PUK1, PIN2 and PUK2.
The PIN1 shall be disabled at power on by default. PIN-PUK printing in
the back side of the USIM card. The format and other details of PIN
and PUK shall be discussed during the contract negotiation.

6. Counters and Other Facilities

Language Preference (LP)=3
PLMN selector=16
CBMI=9
Service Provider Name (SPN)=1
Access Control Class (ACC)=1
Forbidden PLMNs=4
Phones book (ADN)=512
Fixed Dialing Numbers (FDN)=20
Short Messages (SMS)=100
Email Storage=20 Records
Capability Config Parameters (CCP)=10
SMS parameters (SMSP)=5
Last number dialed (LND)=20
Service Dialing Numbers (SDN)=10
Barred dialing numbers (BDN)=10
GPRS enabled=yes
MMS enabled=Yes
Body material= ABS
Artwork layout= To be provided later by Teletalk
Type of printing=Laser Engrave and Thermal Printing
The Result of Printing=Black, Unerasable
Formatting=Full Personalized
7. Handset Compatibility

7.1 Compatibility with the hand set: - Compatible with all brand of the 2G
handsets and at least, but not limited to, the brands such as Nokia,
Motorola, Sony Ericsson, LG , Huawei , Samsung etc. 3G handset.

8. Applications
USIM Application=Yes
SIM Application=Yes
GSM_ACCESS in USIM=Yes
9. STK application

9.1 The USIM Card shall host several applications loaded dynamically into
the memory. The applications support all the proactive commands
defined in GSM 11.14 standard.

9.2 The USIM Card shall have feature to store secured items protected by
a single password. e.g. Bank account, credit card etc. User shall be
able to view, edit, add and delete these data only if they know the
password or PIN.

9.3 The USIM Card shall have provision to create at least 20 different
groups from the contacts stored in the SIM phone book and send SMS
to different groups of people. The number of groups and member in
each group shall be discussed during the contract negotiation.

9.4 The USIM card shall have an in-built 3G extended phone book
application.

9.5 Users of 2G Handsets to visualize and edit their USIM based 3G

Phonebook content as per GSM 11.11.

9.6 The USIM Card shall have Extended Phonebook or multi-phone

functionality to store variety of contact details per entry eg. Mobile
number, home number, office number, email address

9.7 The first 250 phonebook entries shall be linked to the 2G default
ADN.

10.Notifications

Number of Menu=15
Main Menu "Teletalk"/or any other defined by Teletalk
Byte code (KB), menu/script for micro browser=20
Number of application keys=30 Slot 1 -3 (reserve) , Slot 4 -30 (use
Operator Keys)
Concatenated SMS for transmit =5
Concatenated SMS for receive =10
 Auto refresh= Yes
USIM card busy notification= Please Wait
Sending Message Notification=Message Sending In Process
11. General Requirements

11.1 Chip Requirements

11.1.1 The card should support 1.8/ 3/ 5 Volts.

11.1.2 The minimum size of the RAM shall be 8K or higher

11.1.3 The card shall support cryptographic libraries DES & 3DES for
various applications that Teletalk might launch in future.

11.1.4 The Card shall work satisfactorily in a temperature range of -

25C to +85C.

11.1.5 The Card shall have data retention capability for a minimum of
10 years.

11.1.6 The card shall support a minimum of 100000 write/erase

cycles.

11.1.7 It should support programming time of 1 ms for program and

1 ms for erase.

11.1.8 The size required in EEPROM by the applet and any applet
specific size shall not be more than 25K, so that there is plenty of
space left for the 3G phonebook files itself

11.2 The card shall support Java 2.1.1 or higher.

11.3 USIM shall provide an Over The Air download mechanism for Remote
File Management and Remote Applet Management as per relevant
standards of ITU and 3GPP

11.3.1 The USIM shall work satisfactorily as a USIM in 3G handsets on

WCDMA network and as a SIM card in the GSM networks, offering
the same level of service as 2G cards. The USIM cards shall function
with all the brands and models of 3G handsets as mentioned in
clause 7.1 above & all the brands of 2G GSM handsets without any
limitations.
11.4 The USIM card shall support administrative commands based on ETSI
TS 102.222, to allow a complete and fully configurable card
customization, at post-issuance.
11.5 USIM Card shall support Re-entrance mechanism: to run 2 different
applications at the same time. Re-entrance refers to the case
whereby a 1st application (e.g. User is browsing in an information
service menu) is interrupted by the triggering of a 2nd application
(e.g. the server sends a SMS to update this menu). The 1st
application is then suspended and the nested 2nd application
executed (The menu is updated). After 2nd application has been
finished, control is returned to the 1st application, so that its own
execution can be finished (The user can still navigate through the
updated menu) the mechanism shall be compliant to the
interoperable re-entrance mentioned in SIM Alliance Interoperability
Stepping Stones Release 2004.

11.6 USIM Card shall support Dynamic Memory Management: to allow a

flexible management of card applications and files, the EEPROM
memory shall be recovered when an application or/and a file is
removed whatever its respective size to enable many applications
operations (loading, deletion etc.) throughout the entire USIM card
life cycle

11.7 The cards should be compliant to ISO standards 7816-3 & 7816-4.

11.8 Communication protocol: ISO T=0

11.9 The Card Dimensions should be as per the ISO 7810.

11.10 PPS procedure: the Maximum speed is F=512, D=32 (223200 bauds
@ 3.57 MHz).

11.11 Card body shall be made of Acrylo Butadiene Nitryl Styrene (ABS)
plastic material and shall be fully compliant to GSM 11.11
specifications, with quality standards stipulated by ISO.

11.12 The Contact Locations should be as per ISO 7816-1/2.

11.13 The Card shall comply with GSM 11.14 standard and ISO 7816-4 for
command format.
12.Acceptance testing
The acceptance test of the delivered goods shall consist of at least but not
limited to the following tests

12.1 Physical Test

The material and marks in the delivered goods shall be checked to confirm
that genuine products of the original manufacturers and specified
materials are used.

12.2 Performance test:

The performance test shall be carried out to confirm that the offered
products meet the technical specification. The acceptance certificate shall
be issued only after successful completion of the acceptance testing of all
the delivered goods.

13.Technical Support

13.1 In case of technical problem in the supplied USIMs, the bidder shall
guarantee technical support at site free of cost to Teletalk. The
manufacturer shall bring all the necessary tools and software to solve
the problem at the shortest possible time.

14.Input file
The bidder shall adapt the production of USIM cards as per Teletalks input
file (order file) format. The Input-file shall be made available in a CD ROM
or sent directly by electronic media.
15.Output file

15.1 The UICC Cards to be loaded in Teletalk's administrative and Billing

System must be supplied as per the format acceptable to Teletalks
system. The format shall be provided during the negotiation. The
output file shall be password protected and the password shall be
provided separately via mutually agreed media.

16.Supported Feature
Bidders shall specify with descriptions of all the features and facilities that
can be incorporated in the 128K USIM cards.

17.Security and Confidentiality

Any information disclosed during the bidding negotiation, production and
supply phase shall be kept confidential. In case of breach of this
confidentiality by the supplier, the supplier shall be accountable for the
consequential losses to Teletalk.

19. Salient features of Specifications in brief.

UICC Specification Modified Value

Memory 128 KB
Flash Optional
RAM 8 KB or Higher
Voltage range 1.8/3/5 V
3GPP release status Rel. 5 or latest
(U)SAT commands Yes
UICC Yes
USIM Yes
3G phonebook 512
SIM browser
- WIB Optional
- S@T Optional
-DSTK Yes
Smart Card Web Server Optional
WIB plug-ins Optional
OTASS Optional
Remote file management Yes
Remote Applet Management Yes
Java Card functionality
Java Card 2.1.1 or latest
GlobalPlatform GP 2.0.1 or latest
Form Factor
2ff 98%
3ff 2%