TIP31C

Power transistors

General features
New enhanced series
High switching speed
hFE improved linearity
hFE Grouping

3
Applications 1
2

Linear and switching industrial application TO-220

Description
The TIP31C is a base island technology NPN
power transistor in TO-220 plastic package with
better performances than the industry standard Internal schematic diagram
TIP31C that make this device suitable for audio,
power linear and switching applications. The
PNP type is TIP32C.

Order codes
Part Number Marking Package Packing

TIP31C R
TIP31C
TIP31C O TO-220 Tube
Note: on page 4
TIP31C Y

April 2006 Rev 1 1/10

www.st.com 10
Contents TIP31C

Contents

1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1 Electrical characteristics (curve) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

3 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

4 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

2/10
TIP31C Absolute maximim ratings

1 Absolute maximim ratings

Table 1. Absolute maximim ratings

Symbol Parameter Value Unit

VCBO Collector-base voltage (IE = 0) 100 V

VCEO Collector-emitter voltage (IB = 0) 100 V

VEBO Emitter-base voltage (IC = 0) 5 V

IC Collector current 3 A
ICM Collector peak current 5 A
IB Base current 1 A
Total dissipation at Tcase = 25C 40 W
PTOT
Total dissipation at Tamb = 25C 2 W

Tstg Storage temperature -65 to 150 C

TJ Max. operating junction temperature 150 C

3/10
Electrical characteristics TIP31C

2 Electrical characteristics

(Tcase = 25C unless otherwise specified)

Table 2. Electrical characteristics

Symbol Parameter Test conditions Min. Typ. Max. Unit

Collector cut-off current

ICEO VCE = 60V 0.3 mA
(IB = 0)

IEBO Emitter cut-off current (IC = 0) VEB = 5V 1 mA

Collector cut-off current

ICES VCE = 100V 0.2 mA
(V BE = 0)

Collector-emitter
VCEO(sus)(1) IC = 30mA 100 V
sustaining voltage (IB = 0)

Collector-emitter saturation
VCE(sat)(1) IC = 3A_ IB = 375mA 1.2 V
voltage

VBE(on)(1) Base-emitter voltage IC = 3A_____ VCE = 4V 1.8 V

IC = 1A_ ___ VCE = 4V 25

IC = 3A _____ VCE = 4V
hFE(1) DC current gain Group R 10 24
Group O 20 44
Group Y 40 50

1. Pulsed duration = 300 ms, duty cycle 1.5%

Note: Product is pre-selected in DC current gain (Group R, Group O and Group Y).
STMicroelectronics reserves the right to ship each groups according to production
availability. Please contact your nearest STMicroelectronics sales office for delivery details.

4/10
TIP31C Electrical characteristics

2.1 Electrical characteristics (curve)

Figure 1. Safe Operating area Figure 2. Derating curves

Figure 3. DC-current gain Figure 4. DC-current gain

Figure 5. Collector-emitter saturation Figure 6. Base-emitter saturation

voltage voltage

5/10
Electrical characteristics TIP31C

Figure 7. Base-emitter on voltage

6/10
TIP31C Package mechanical data

3 Package mechanical data

In order to meet environmental requirements, ST offers these devices in ECOPACK

packages. These packages have a Lead-free second level interconnect. The category of
second level interconnect is marked on the package and on the inner box label, in
compliance with JEDEC Standard JESD97. The maximum ratings related to soldering
conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at: www.st.com

7/10
Package mechanical data TIP31C

TO-220 MECHANICAL DATA

mm. inch
DIM.
MIN. TYP MAX. MIN. TYP. MAX.
A 4.40 4.60 0.173 0.181
b 0.61 0.88 0.024 0.034
b1 1.15 1.70 0.045 0.066
c 0.49 0.70 0.019 0.027
D 15.25 15.75 0.60 0.620
E 10 10.40 0.393 0.409
e 2.40 2.70 0.094 0.106
e1 4.95 5.15 0.194 0.202
F 1.23 1.32 0.048 0.052
H1 6.20 6.60 0.244 0.256
J1 2.40 2.72 0.094 0.107
L 13 14 0.511 0.551
L1 3.50 3.93 0.137 0.154
L20 16.40 0.645
L30 28.90 1.137
P 3.75 3.85 0.147 0.151
Q 2.65 2.95 0.104 0.116

8/10
TIP31C Revision history

4 Revision history

Table 3. Revision history

Date Revision Changes

20-Apr-2006 1 New release

9/10
 TIP31C

Please Read Carefully:

Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (ST) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to STs terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.

UNLESS OTHERWISE SET FORTH IN STS TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT DESIGNED,
AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS,
NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR
SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE.

Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.

ST and the ST logo are trademarks or registered trademarks of ST in various countries.

Information in this document supersedes and replaces all information previously supplied.

The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.

2006 STMicroelectronics - All rights reserved

STMicroelectronics group of companies

Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com

10/10