0% found this document useful (0 votes)
334 views1 page

D P W H: Schedule of Loads

This document provides the schedule of electrical loads for the Agela Rice Mill located in Passi City, Iloilo. It details the various machines, motors, and equipment that make up the mill's electrical system including rice whitening machines, dryers, lighting, and other outlets. Calculations are shown for sizing the feeder conductors and main breakers to supply the loads. An open wiring system using spool insulators is specified. A 215.22 KVA transformer is required to step down the primary voltage of 13,200V to the secondary voltage of 240V used by the mill equipment. The schedule was certified by the professional electrical engineer Rodel Dosano.

Uploaded by

Rodel D Dosano
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
334 views1 page

D P W H: Schedule of Loads

This document provides the schedule of electrical loads for the Agela Rice Mill located in Passi City, Iloilo. It details the various machines, motors, and equipment that make up the mill's electrical system including rice whitening machines, dryers, lighting, and other outlets. Calculations are shown for sizing the feeder conductors and main breakers to supply the loads. An open wiring system using spool insulators is specified. A 215.22 KVA transformer is required to step down the primary voltage of 13,200V to the secondary voltage of 240V used by the mill equipment. The schedule was certified by the professional electrical engineer Rodel Dosano.

Uploaded by

Rodel D Dosano
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

REPUBLIC OF THE PHILIPPINES

SCHEDULE OF LOADS: D P W H
0FFICE OF THE BUILDING OFFICIAL

FDP
CKT VOLTAGE NO. of VOLT CKT. OVER CURRENT P A S S I C I T Y , ILOILO
SIZES and TYPE SIZES and TYPE TYPE of PROTECTION
RATING PHASE AMPERE PROT.
NO. LOAD DESCRIPTIONS AB CA BC (V) ( VA ) (V) of CONDUCTORS of CONDUITS STARTING
RICE WHITENING MACHINE #1 OPEN WIRING on
F1 175.80 175.80 175.80 220 66,987
& RICE SEPERATOR MACHINE SPOOL INSULATORS
RICE DRYER (3 UNITS) 9,374 OPEN WIRING on
F2 24.60 24.60 24.60 220 SPOOL INSULATORS
OPEN WIRING on
F3 RICE DRYER (3 UNITS) 24.60 24.60 24.60 220 9,374
SPOOL INSULATORS
OPEN WIRING on
F4 LIGHTING & CONV. OUTLETS 10.19 220 2,242 SPOOL INSULATORS
11.92 OPEN WIRING on
F5 LIGHTING & CONV. OUTLETS 220 2,622
SPOOL INSULATORS E L E C T R I C A L
F6 S P A R E 13.64 220 3,001

TOTALS / MAINS 235.19 226.92 238.64 220 93,600

Feeder Computed load: FEEDER CONDUCTOR USE: Apply 80% Demand Factor
It = 1.732 [(238.64 ) = 413.32 A OPEN WIRING on SPOOL INSULATORS It = 413.32 A x .80% = 330.66 A
Main Breaker: 350 AT, 3P, 220V, MCCB

OPEN WIRING on
F7 RICE WHITENING MACHINE #2 169.00 169.00 169.00 220 64,396
SPOOL INSULATORS

Mains Computed load: FEEDER CONDUCTOR USE:


Apply 80% Demand Factor
It = 1.732 (169.00 ) = 292.71 A OPEN WIRING on SPOOL INSULATORS It = 292.71 A x .80% = 234.17 A
Main Breaker: 200 AT, 3P, 220V, MCCB

TRANSFORMER RATING USE:


It = FDF + F7 = 330.66 + 234.17 = 564.83 A
KVA = 3 ( 564.83 A ) (.22 V) = 215.22 KVA

Feeder 8 (F7) Rice Whitining


PRIMARY: 13200 V
Machine
SECONDARY: 240 Vac
Rice Whitining Machine
Computations: (F1)
F1-1
ELECTRIC MOTOR, 50 HP, 3 , 22OV
Ifl = 130.00 A ; Ic = 130.00 x 1.25 = 162.50 A
USE: 3 - 60.00 THW CU. WIRES in
3-32 uPVC RIGID CONDUITS
w / 17 5 AT, 3P, , MCCB CKT PROT.

F1-2
ELECTRIC MOTOR, 10 HP, 3 , 22OV
Ifl = 28.00 A ; Ic = 28.00 x 1.25 = 35.00 A
USE: 3 - 8.00 W CU. WIRES in
32 uPVC RIGID CONDUITS
w/ 40 AT, 3P, 3 , MCCB CKT PROT.
F1-3
ELECTRIC MOTOR, 2 HP, 3 , 22OV
Ifl = 6.80 A ; Ic = 6.80 x 1.25 = 8.50 A
USE: 3 - 5.50 W CU. WIRES in
20 uPVC RIGID CONDUITS
w/ 30 AT, 3P, 3 , MCCB CKT PROT.
F1-4
ELECTRIC MOTOR, 1 HP, 3 , 22OV
Ifl = 4.20 A ; Ic = 4.20 x 1.25 = 5.25 A
USE: 3 - 3.50 W CU. WIRES in
20 uPVC RIGID CONDUITS
w/ 30 AT, 3P, 3 , MCCB CKT PROT.

F7 Feeder Computations:
Ifl = 130.00 + 28.00 + 6.80 + 4.20 =169.00 A
Ic = 169.00 x 1.25 = 211.25 A
USE: 3 - 60.00 THW CU. WIRES in
FREE AIR on SPOOLS
w / 200 AT, 3P, , MCCB CKT PROT.

Oct. 18, 2016

CERTIFIED BY: PRC NO.: 3757 PROJECT TITLE / LOCATION : APPROVED: SHEET CONTENT:
TIN: 919-280-601
PTR NO.: 5293705
AGELA RICE MILL E-3
DATE of ISSUE: Jan. 07, 2016 ANTONIO PALERMO
AS BUILT
RODEL D. DOSANO
PROFESSIONAL ELECTRICAL ENGINEER PLACE of ISSUE: ILOILO CITY BRGY. IMBANG GDE. PASSI CITY, ILOILO OWNER 3

You might also like