Byron Jackson Pumps

Durco Process Pumps

Stork Engineered Pumps
United Centrifugal Pumps
Rotating Equipment Division Wilson-Snyder Pumps

Hydraulic Engineering

Pump
Mechanical Design
Products
Materials Expertise

Chemical Process
Smart Technology ANSI and ISO Pumps

Manufacturing Technology
Petroleum Process
API 610 Pumps

Horizontal
Between Bearing
Single Stage
Pumps

Horizontal
Between Bearing
Multistage Pumps

Vertical Pumps

USA and Canada Latin America

Flowserve Corporation Flowserve de Venezuela S.A.
Rotating Equipment Division A Unit of Flowserve Corporation
Millennium Center Rotating Equipment Division Submersible Motor
222 Las Colinas Blvd., 15th Floor Rotating Equipment Division Unicentro Virginia Pumps
Irving, TX 75039-5421 USA Avenida 3C con calle 67
Telephone: 1 972 443 6500 Local 5, Planta Baja
Telefax: 1 972 443 6800 Your local Flowserve representative: Maracaibo, Venezuela
Telephone: 58 61 911 129
Europe, Africa, Middle East Telefax: 58 61 921 904 Specialty Pumps
BW/IP International Ltd.
A Unit of Flowserve Corporation Asia Pacific
Flowserve has numerous manufacturing, sales,
Rotating Equipment Division and service operations throughout the world. Durco-Valtek (Asia Pacific) Pte. Ltd.
Harley House Please contact one of the regional centers to A Unit of Flowserve Corporation
94 Hare Lane, Claygate, Esher determine the location of the nearest office. Rotating Equipment Division Nuclear Products
Surrey KT10 ORB, UK 12 Tuas Avenue 20
Telephone: 44 1372 463700 Singapore 638824 and Services
Telefax: 44 1372 463801 Republic of Singapore
Printed in U.S.A.
Telephone: 65 862 3332
December 1998 Telefax: 65 868 4603
Flowserve Corporation
Bulletin P-25-100
 Rotating Equipment Division Rotating Equipment Division

Tracing its origins to Complementary Product Range Engineering Design Chemical Process Flowserve offers a broad line of Metallic Sealed/4, 5
Flowserve offers a wide range Flowserve has been a pioneer Durco chemical process pumps
1872, Flowserves ANSI and ISO which conform to ASME B73.1M
Metallic Specialty/6
of complementary pump types, in pump design for more than
from pre-engineered process 125 years with many important Pumps and B73.2M (ANSI) and ISO Metallic Magnetic Drive/7
Rotating Equipment pumps, to highly engineered firsts to its credit. The com- 2858/5199 dimensional and Non-Metallic Sealed/8
design criteria.
Division is one of and special purpose pumps pany remains fully committed Non-Metallic
and systems. to innovation, new product Magnetic Drive/9
the worlds leading development and the application
Recognized Standards of new technology to provide Petroleum Process Horizontal and vertical in-line Horizontal Overhung/10, 11
suppliers of pumps Flowserve provides pumps built its customers with the best pumps are marketed under the
API 610 Pumps Vertical In-Line/12, 13
for the petroleum, to recognized global standards possible solutions to their Byron Jackson Pumps, Stork
Between Bearing
and customer specifications. pumping problems. Engineered Pumps, Wilson-Snyder
chemical and power Pumps and United Centrifugal Radially Split
Applications Know-How Service and Repair Pumps heritage names. Single Stage/14
generation industries. Flowserve is highly regarded Flowserves ServiceRepair Two Stage/15
The quality, reliability for its knowledge and skill in Division is dedicated to
helping customers solve difficult maximizing performance and Horizontal These Byron Jackson Pumps, Stork Single Stage/16
and innovation process problems. reliability-centered maintenance Engineered Pumps, United Centrifugal
programs. Pump related services Between Bearing Pumps and Wilson-Snyder Pumps
reflected in Materials Expertise include startup and commis- Single Stage offer proven high performance in
Pumps power generation, petroleum, pipe-
Flowserves heritage Flowserves foundries are sioning; routine and repair
line and general service applications.
unsurpassed in high alloy maintenance; ANSI and ISO
names testify to the materials including stainless power end exchange program;
steels, nickel based and reactive mechanical seal exchange Horizontal Rugged and reliable pumps offer Single Casing/17
Companys place as alloys. This same level of quality program; re-rates, upgrades high head and high flow performance
Between Bearing in a wide variety of applications.
Double Casing/18, 19
a world leader in is found in its non-metallic and retrofits; spare parts;
Multistage Pumps They are available under the
production operations. and training. Byron Jackson Pumps and United
pump technology. Materials specialists are Centrifugal Pumps heritage names.
available to assist customers
with applications. Vertical Pumps Byron Jackson Pumps provide Pre-Engineered/20
coverage for applications requiring
Double Casing/21
the versatility of vertical pump
configurations. Circulator/22

Submersible Proven over six decades of design Submersible/23

innovation, submersible motor Byron
Motor Pumps Jackson Pumps are found in munici-
pal applications, mining, irrigation,
cavern storage, and offshore drilling.

Specialty Pumps Highly engineered pumps for Specialty/24, 25

special applications include ebullators,
cryogenic pumps, concrete volute
pumps, expanders, plus many others.

Nuclear Products Nuclear capabilities include ASME Nuclear/26, 27

Code Class 1, 2 and 3 pumps and
and Services nuclear mechanical seals, plus full
repair, upgrade and maintenance
services.

On the cover: Composite Envelope curves give generalized Performance Curves/28, 29

An impeller from head and flow ranges for families
Performance of pumps.
conception to production, VLT & VTP

utilizing computational Curves H HQ

fluid dynamics for analysis

and 3-D stereo lithography Pump Cross VCT & VMT Table cross references pump design, Cross Reference/30, 31
for rapid prototyping. model and application by industry.
Reference Guide Q 3
 Rotating Equipment Division Rotating Equipment Division

Chemical Process Flowserve is the leading supplier SealSentry FM

of chemical process pumps Seal Chambers
ANSI and ISO worldwide. Marketed under the Enlarged, tapered bore with
Pumps cast-in flow modifiers
Durco Process Pumps trade- Solids flushed away from
name, they are found wherever mechanical seal
Metallic Sealed reliability in severe services is Vapor bubbles and heat
a requirement. purged from seal chamber
for cooler, more reliable
Mark III pumps conform to running seals
the ASME B73.1M (ANSI) Need for flush line
is eliminated
standard.
Chemstar pumps conform
to ISO 2858 dimensional and
ISO 5199 design criteria.
Chemstar
Both the Mark III ANSI and
Chemstar ISO process
pumps utilize the same
unique features for
maximizing performance
and mean time between
planned maintenance
(MTBPM).

Mark III
Reverse Vane Impeller
Impeller clearance set to
rear cover plate, not casing.
This allows all maintenance
to be done in the repair
shop, since there is no need
for the casing to be present
One setting controls pump
performance, seal chamber
pressure, thrust loads
Low, repeatable published
seal chamber pressure
Low NPSHR
Micrometer Style Impeller Low cost rear cover plate
Adjustment allows fast and is wear surface
accurate setting of impeller
clearance without shims,
jackbolts or feeler gauges

4 5
 Rotating Equipment Division Rotating Equipment Division

Chemical Process Special designs utilize Chemical Process Flowserve metallic magnetic Guardian
proven, heavy-duty Durco drive pumps are used wherever
ANSI and ISO ANSI and ISO
Mark IIIA power ends. process leakage cannot be
Pumps Pumps tolerated. Zero leakage require-
ments include:
Metallic Sealed Metallic
Emissions reduction
Specialty Magnetic Drive Toxic services
Lo-Flo Flammable liquids
Circular concentric casing and Expensive liquids
radial vane impeller improve Ultrapure services
reliability in low flow, high Difficult to seal liquids
head applications. Guardian
Durco Guardian pumps
conform to the ASME B73.1M
(ANSI) dimensional standard.
Sealmatic Chemstar MD
Dynamically sealing repeller
Durco Chemstar MD pumps
eliminates the need for
conform to ISO 2858
conventional mechanical seals.
dimensional standards.
Broad Application Range
Temperatures to 550F Chemstar MD
Self-Priming (288C)
This pump is designed to draw Wide range of alloys for
liquid from sources below the difficult services
pump while conveniently Interchangeability
located high and dry. Guardian and Chemstar MD
process pumps utilize the
same impellers and casings
as the conventionally sealed
Recessed Impeller Mark III and Chemstar
Vortex pump handles large process pumps.
solids, slurries and shear
sensitive fluids.
Silicon Carbide Bearings
Unmatched corrosion and
abrasion resistance
In-Line Unique, high temperature
These pumps conform to the bushing cartridges with toler-
ASME B73.2M (ANSI) standard. ance rings to compensate for
Vertical, in-line configuration thermal expansion
means less floor space, lower
installation costs and improved
capability for handling external
piping loads.

High Silicon Iron

Material has unmatched
corrosion resistance for severe
services such as hot High Temperature
sulfuric acid. Bearing Assembly

6 7
 Rotating Equipment Division Rotating Equipment Division

Chemical Process PolyChem Process Pumps Fluoropolymer PFA lined Chemical Process PolyChem Process Pumps are Available in ANSI, ISO and JIS
are designed for highly corrosive wet end designed for highly corrosive configurations
ANSI and ISO Superior corrosion ANSI and ISO Global application
applications in the process applications in the process
Pumps industries.
resistance Pumps industries. Parts continuity
Temperatures to 300F
Non-Metallic (150C) Non-Metallic
S-Series M-Series
Mechanically The Durco S-Series PolyChem Magnetic Drive The Durco M-Series PolyChem
Process Pump is a convention- Process Pump is a magnetic
Sealed
ally sealed design. drive design.
Available in ANSI, ISO and
JIS configurations
Global application
Parts continuity

M-Series Fluoropolymer PFA lined

Mag Drive Pump wet end
Close coupled and long Superior corrosion
coupled designs resistance
Simple design with Temperatures to 300F
minimum number of parts (150C)

S-Series
Sealed Pump
Tapered bore seal chamber
with flow modifiers for
optimum seal performance
Multiple mechanical sealing
options available
Other non-metallic pumps
F-Series
Solid fiber reinforced
epoxy
ANSI dimensional
L-Series
High performance
mechanical seal
Fiber reinforced epoxy/
PFA lined
ANSI dimensional

8 9
 Rotating Equipment Division Rotating Equipment Division

Petroleum Process The Flowserve overhung designs PHL Bearing Configurations Bearing Lubrication and
combine the expertise and expe- PHL pumps are an alternate Deep groove radial and Cooling Options
API 610 Pumps design that use multi-channel Oil mist and oil purge for con-
rience of Byron Jackson Pumps, duplex thrust bearings for
Horizontal Stork Engineered Pumps, United diffuser technology. Magnetic maximum bearing life tinuous bearing lubrication
Centrifugal Pumps and Wilson- drive versions are available Special bearing arrangement Fan cooling for high operating
Overhung (PHL-MAG). or high ambient temperatures
Snyder Pumps. available for high suction
Centerline Diffuser pressures Removable water jacket to
Best efficiency point tuned to insulate radial bearing from
Mounted SCE process temperature
SCE pumps are fully compliant specific duty flow
with API 610, 8th Edition. Low minimum continuous
flow End or Top Suction,
Broad Application Range Top Discharge Nozzles
Diffusers changeable for new
Temperatures from -50F fit multiple piping
operating conditions
(-46C) to 850F (450C) configurations.
Pressures to 667 psi (4600 kPa)
API 682 Seal Chamber
and flows to 9000 gpm
accommodates all combinations
(2045 m3/h) of seal models and styles,
Petroleum refining, production including external drive dual
and distribution pressurized and unpressurized
Petrochemical and heavy duty cartridge types for the most
severe services.
chemical
Gas industry services
Finned Bearing Housing
maximizes heat
dissipation Optional Cutter Screw Fan and Water Cooled
Coke Crusher Design Bearing Feature

SCE

SCE
Finned Inboard Deflector Cryogenic Design Front and Back Double
with Fan provides air flow at is available for temperatures Wear Rings
the seal chamber to deflect to -250F (-157C). Operating clearance
heat from the shaft. and pump efficiency
maintained
Balance holes control
thrust
10 11
 Rotating Equipment Division Rotating Equipment Division

Petroleum Process Vertical in-line products PVML

combine the best hydraulics PVML pumps feature a multi-
API-610 Pumps PVML
and mechanical features of channel diffuser design casing
PVML pumps meet
Vertical In-Line Byron Jackson Pumps, Stork
API-610 and
for fine tuning the best efficiency
Engineered Pumps, United point to the requested duty
BS 4082 Class R
Centrifugal Pumps, and requirements. point. They are also available in
Wilson-Snyder Pumps. magnetic drive configurations
(PVML-MAG).
VIL and VIL-B
These in-line process pumps
from Flowserve are designed
for simplified piping and
space savings, with in-line
suction and discharge nozzles.

VIL-B
VIL-B pumps are fully
compliant with API 610,
8th Edition.
API 682 seal chamber is
standard.
Three bearing brackets for
complete range maximize
interchangeability.
Recessed oil sump prevents
residue from entering bearing.
No baseplate or fixed founda-
tion is required. The unit can
move with piping forces to
reduce pipe stress.
Finned bearing housing
maximizes heat dissipation.

VIL-B

VILDS
VILDS pumps feature a
VIL
double-suction in-line
Compact design with rigid
design for high flow,
4-piece coupling allows seal
limited NPSHA, tank
removal without disturbing
farm, transfer and
motor.
VIL-B pipeline booster
services.

12 13
 Rotating Equipment Division Rotating Equipment Division

Petroleum Process DSHF Typical Applications Petroleum Process TSHO, DSTHO, DSTHF Finned bearing housings to
Double Suction Low NPSHA These horizontal, between bear- maximize heat dissipation
API 610 Pumps API 610 Pumps
These horizontal, double Operating temperatures to ing designs are available in Centerline support to maintain
Single Stage suction, between bearing 750F (400C) Two Stage both single and double suction: shaft alignment at elevated
pumps are designed for use in High suction pressures TSHO - single suction temperatures
Between Bearing critical services. DSHF pumps Between Bearing first stage
Options
Radially Split are fully compliant with API Options Radially Split DSTHO and DSTHF - double
Cutter screw coke crusher
610, 8th Edition. Cutter screw coke crusher suction first stage
design
design
These pumps are fully Bearing arrangements to suit
Designed for Maximum Bearing arrangements to suit
compliant with API 610, service conditions and
Reliability service conditions and
8th Edition. specifications
Between bearing design to specifications
DSHF or TSHO Ball radial and ball thrust
minimize deflection at Ball radial and ball thrust
Typical configuration Designed for Maximum Sleeve radial and ball thrust
mechanical seals Sleeve radial and ball thrust
Reliability Sleeve radial and pivot shoe
Double suction impeller for Sleeve radial and pivot shoe
Between bearing design to thrust
axial balance thrust DSTHO, DSTHF
minimize deflection at Fan cooled bearing housing
Oil mist or oil purge bearing Fan cooled bearing housing Double Suction First
mechanical seals for temperatures from 250F
lubrication for temperatures from 250F Stage for high flow, low
Opposed impellers for axial (121C) to 500F (260C)
API 682 seal chamber (121C) to 500F (260C) NPSHA applications
balance Water cooled housing for
Circular bearing housing Water cooled housing for
Oil mist or oil purge bearing temperatures above 500F
mounting for maximum temperatures above 500F
lubrication (260C)
bearing support (260C)
API 682 seal chamber
Finned bearing housings to Circular bearing housing
maximize heat dissipation mounting for maximum
Centerline support to maintain bearing support
shaft alignment at elevated
temperatures

DSHF with ball radial and

ball thrust bearings

TSHO with sleeve radial and

ball thrust bearings

14 15
 Rotating Equipment Division Rotating Equipment Division

Between Bearing DVS, DV, HGT Design Features Bearing Arrangements Between Bearing MX, MSN, DVMX Design Features
These axially split, double volute, Axially split case for easy to suit service conditions MX, MSN and DVMX pumps Standard safe working pressure
Single Stage Multistage
double suction centrifugal pumps maintenance of internal and specifications are between bearing, axially to 2160 psi (14890 kPa) and
Axially Split can be supplied for API 610 or components Ball radial and ball Axially Split split, double volute case, side hydro test to 3240 psi
general service requirements. Double suction impeller for thrust suction, side discharge, multi- (22335 kPa)
Pumps Pumps
DVS pumps are fully compliant axial balance Sleeve radial and ball stage designs. Opposed impellers for axial
with API 610, 8th Edition. They Side suction and discharge thrust MX, MSN and DVMX pumps balance
are suitable for pipeline service Finned bearing housings to Sleeve radial and pivot are fully compliant with API Double volute case for radial
and other heavy-duty applications. maximize heat dissipation shoe thrust 610, 8th Edition. These Byron balance
Speeds to 7500 rpm for Jackson Pumps and United Double row bolting for reliable
DV and HGT pumps are general
expanded hydraulic coverage Centrifugal Pumps are designed case sealing
service designs for distribution
for high pressure, heavy-duty Dynamic balancing of fully
and other service water
applications. assembled rotating element
applications.
Finned bearing housings to
Typical Applications maximum heat dissipation
Petroleum refining Speeds to 7500 rpm and
Pipeline safe working pressures to
Boiler feedwater 4000 psi (27575 kPa) for
Water treatment expanded hydraulic coverage
Mining
Injection Bearing Arrangements to
suit service conditions and
specifications
Ball radial and ball thrust
Sleeve radial and ball thrust
Sleeve radial and pivot shoe
thrust
Fan Cooled and Water DVS
Cooled Bearing Housings
available for high
temperature applications
Fan Cooled and
Water Cooled Bearing
Housings provide
added reliability for high
temperature applications
MX

DVS with sleeve radial

and ball thrust bearings

MX seven-stage with
double suction first
stage impeller, and
sleeve radial and ball
thrust bearings

16 17
 Rotating Equipment Division Rotating Equipment Division

Between Bearing HDO, HSO, HDB, HSB Choice of Shaft Sealing

HDO, HDB (double suction, first Throttle bushings
Multistage
stage) and HSO, HSB (single suc- Mechanical seals
Radially Split tion, first stage) are double cas-
ing, multistage Byron Jackson
Double Casing
Pumps. An outer barrel and cover
Pumps with one radial high pressure
sealing joint encloses an axially
Petroleum Design
split inner volute casing.
Type HDO and HSO
HDO and HSO pumps are fully Double Volute Outer Barrel Axially Split Inner Case
Power Design compliant with API 610, 8th Inner Case for radial balance for high pressure design allows for dynamic
Edition for petroleum and balancing of assembled
Type HDB and HSB rotating element prior to
petrochemical applications. installation
Optional Interstage
Typical Applications
Take-off provides high
Process charging
pressure liquid normally
Hot oil
at 60% of pump total
Injection
differential head.
Pipeline Primarily used for power
Boiler feed plant steam reheat
attemperation purposes.
Operating Parameters
Temperatures to 800F
(430C)
Pressures to 6000 psi
(41370 kPa)
Flows to 18000 gpm
(4090 m3/h)
Operating speeds to 9000 rpm

Choice of Nozzle Orientation

Top-suction, top discharge
Bottom suction, top discharge
Side suction, side discharge Double-Acting, Pivot-
Other options available to Shoe Thrust Bearings
match field piping and Self-Aligning,
Lubricated Babbitt-
Choice of Nozzle Connections Lined Radial Bearings
Weld end are standard, providing
Flanged maximum reliability and
reduced maintenance
cost.

HDOI, HSOI,
HDB five-stage with HDBI, HSBI
shaft sealing and nozzle These compact versions
arrangement for typical of the HDO, HSO, HDB
boiler feedwater service
and HSB pumps incor-
porate hydraulic innova-
tions in impeller and
volute casing designs.

HDO or HDB
18 19
Typical configuration
 Rotating Equipment Division Rotating Equipment Division

Vertical Pumps These Byron Jackson Pumps Sumpmaster Design Features Operating Parameters: Vertical Pumps VLT
are particularly well suited for Field adjustable semi-open Flows to 3500 gpm VLT high performance Byron
Pre-Engineered services such as: impellers for control of pump (795 m3/h) Double Casing Jackson Pumps are available in
Power plant circulating performance Heads to 400 ft three versions:
River intake Through-bolts in discharge (122 m) General Industry Service
Cooling tower flange for easy maintenance Temperatures to 150F API 610 7th Edition
Water supply Shaft never in compression; (65C) API 610 8th Edition
Irrigation semi-open impeller design Power to 400 hp
provides continuous down- (298 kW) All versions are based on Byron
thrust over entire head capacity Jackson Pumps design, quality
curve, including start up and construction standards
established for over 30 years,
with thousands of pumps
installed worldwide.

Design Features
Low NPSH Shockless Entry
with 11000 Nss* first stage
impeller
Integral fabricated column
support bearings
Collet or ring and key impeller
mounting
One-piece shaft construction
for shaft lengths to 20 ft (6 m)
Rigid 4-piece coupling
Fabrications manufactured
using ASME Section IX code
qualified welders
Fabrications designed to
national standards when VLT
required API 610 version
Wide range of hydraulic
designs to suit all applications
Choice of bearings and VMT high capacity
HQ Circulator Installation
mechanical seals vertical pump
HQ Circulator Design Features Operating Parameters Pump mounted thrust bearing designs are also
Pumps fabricated using ASME Flows to 25000 gpm when required available.
Section IX certified welders, (5680 m3/h) Tank or sump mount options
with welds stamped for quality Heads to 600 ft (183 m) available
control Temperatures to 275F
* Nss is 11000 using gpm and ft,
All metal-to-metal rabbet fits (135C) 12777 using m3/h and m. Operating
sealed with O-rings Power to 2000 hp (1491 kW) Parameters
Continually rising head Temperatures
capacity curve from maximum Deepwell Turbine Design from -320F
flow to shut off Features (-196C) to
Non-overloading horsepower Extra long bypass seal and VLT Installation 650F (343C)
curve from best efficiency flow bearing Discharge pres-
to maximum flow Sealed for life bottom sures to 1480 psi
Head room for motor removal bearings with grease reservoir (10203 kPa)
minimized by use of vertical
solid shaft coupling construction Operating Parameters Sumpmaster
Integrally fabricated bearing Flows to 5000 gpm
spider construction on 5-foot (1136 m3/h) Standard Large Eye First
maximum spacing between Heads to 1000 ft (305 m) Stage Impeller
HQ Circulator bearings Settings to 1250 ft (381 m)
20 21
 Rotating Equipment Division Rotating Equipment Division

Vertical Pumps Flowserve offers a broad Submersible Flowserve has been manufactur- Sealing Choices
range of wet or dry pit vertical ing submersible pumps and Double mechanical
Circulator Motor Pumps
circulator type pumps. motors since 1934 under the
Byron Jackson Pumps heritage
Design Features name, pioneering many tech-
Vertical space saving nological advances such as oil
construction filled motors, liquid metal seals
Open, semi-open and closed and plug-on power cable
impellers available for wide assemblies.
range of applications
Oil, fresh water or self lube
Oil Filled with Internal Force
column construction Pressurized mechanical
Feed, Filtered, Cooled Oil
Engineered to customer
Circulation maintains even
specifications
heat distribution
Wide range of impeller designs
and specific speeds (1800-
Power Cable Sealing Plug-On
14000*) for optimum
Feature for ease of installation
hydraulic coverage
Typical Applications Integral bearing retainer
Cooling tower Sizes 20 in (500 mm) to Vacuum Pressure Impregnated
Intake water 120 in (3000 mm) (VPI) Epoxy Coated Winding
Storm water Above ground or below System for superior insulation Liquid metal
Industrial effluent ground discharge and long service life
Condenser cooling Packed stuffing box or
mechanical seal
Operating Parameters Optional pull-out design for Double Acting Thrust Bearing
Flows to 450000 gpm ease in maintenance System for continuous up or
(102270 m3/h) Pump mounted thrust bearings down thrust capability
Heads to 350 ft (107 m) when required
Optional concrete volute
Special Metallurgies available
construction (see page 24)
for corrosive services.
Typical Applications
* Ns range is 1800-14000 using gpm Offshore platform
and ft, 2091-16260 using m3/h and m. Wide Range of Ratings and
Storage cavern
Voltages
Mine dewatering
10 hp (7.5 kW) to 2000 hp
Fire fighting
(1491 kW)
Municipal water supply
200V to 6600V
2, 4, 6 and 8 pole designs Services
available in 50 or 60 Hz Potable water
frequencies Ballast water
Cooling water
Approved for Mining Service Firewater
by U.S. Mine Safety Health Propane
Administration (MSHA) Butane
Gasoline
Motor Designations
Crude oil
Model H with mercury sealing
Diesel fuel
Model M with mechanical
Vertical Jet fuel
sealing
Circulator Motor 12 Stage
Pump Installation Options
Variable Speed
Horizontal, incline or
Suitable for use with variable
vertical
frequency drives
Bottom suction designs
available
Single motor configura-
Vertical Circulator Installation tions available for
22 deep settings 23
 Rotating Equipment Division Rotating Equipment Division

Specialty Pumps Flowserve is dedicated to pro- Flowserve Temperature Range Specialty Pumps Ebullating and Recycle Pumps Operating Parameters
viding innovative pump designs +1460F +793C These Byron Jackson Pumps Pressures to 3500 psi
to meet the increasing process are used to upgrade oil refinery (24129 kPa)
and reliability demands of products. They are an integral Temperatures to 950F
+850F +454C
customers worldwide. part of two proprietary (510C)
processes that enable refineries
Flowserve maintains strong 0F -18C to increase product yields.
technical expertise in the follow-
ing engineering disciplines: -50F -45C These units are completely
Hydraulic self-contained and include a
Mechanical Flowserve variable speed motor
-340F -207C
Metallurgical and a heat exchanger.
Electrical Pumps for Extreme
Fluid systems interaction Temperatures
These two pages describe and Flowserve has developed and
depict only five examples supplied specialty pumps in hori-
among the numerous pumps zontal and vertical configurations
already developed and in for a wide variety of applications.
service around the world.
Cryogenic Pumps for LOX, LIN
and LNG services
Temperatures to -340F
(-207C)
Speeds to 10000 rpm
Low flow high head conditions

High Temperature Pumps

Molten salts to 650F (343C)
Molten metals to 1450F
(788C)

Concrete Volute Pumps

Pump assembly integrated
into civil construction Cryogenic Liquid Expanders
Pre-fabricated concrete Flowserve cryogenic expanders
segments form intake structure have amassed hundreds of
for the pump thousands of hours operating
experience in world scale LNG
Typical Applications and liquid helium production
Condenser cooling service since their introduction in 1989.
Irrigation
Drainage Benefits
Increases output of marketable
Design and Operating products and revenue
Parameters Reduces heat input during
BSV pumps pressure reductions
Open mixed flow impeller Converts 90% of pressure
Heads to 65 ft (20 m) energy to electrical power
Flows to 440000 gpm
(100000 m3/h)
BCV pumps
Closed mixed flow impeller
Heads to 98 ft (30 m)
Flows to 440000 gpm
(100000 m3/h)
24 25
 Rotating Equipment Division Rotating Equipment Division

Nuclear Flowserve is a premier designer ASME Code Class 2 and 3 Nuclear Flowserve is a full service Safety Related Repairs
and manufacturer of pumps and Auxiliary Pumps are available specialist to the nuclear industry, incorporate the following
Pumps and Seals mechanical seals for the nuclear for the following plant services: Repairs and offering: procedures, analyses and
industry. These products and Reactor feed Services Auxiliary and steam side repair capabilities:
services have been developed Residual heat removal repairs Nuclear class engineering
in response to the needs of the Core spray Safety related repairs and quality systems
contemporary marketplace. Control rod drive Contaminated repairs Failure analysis
Essential service water Technical services Product and metallurgy
Safety injection Turnkey services upgrades
Charging Complete task management Full machining capability
Auxiliary feed water Planning, special tooling and Restoration to design
craft labor standards and tolerances

Primary Coolant Pumps

are supplied or upgraded
to rigorous technological
and NSSS design
standards.

Flowserves Patented
N Seal and primary
coolant pump sealing
systems have been Contaminated Component Repair and upgrade
developed for retrofitting Repairs are handled in a state- of a radiologically
existing systems. of-the-art hot shop. Tasks and contaminated nuclear
Assembly of a pump.
Benefits include: repaired Safety services provided include:
Improved reliability Related pump Decontamination
Reduced maintenance Waste disposal
Extended plant Full machining capability
operation cycles Welding and balancing

A Technical Services Team

of nuclear specialists provides
engineering services, task man-
agement and turnkey services:
Planning, including
ALARA plans
Procedures
Technical direction
Problem solving and
innovative solutions
Nuclear Spare Parts are Special handling and
available for routine renewal shielding tooling
Removal of primary
and product upgrades. Supply
coolant pump internal
options include rapid response components
where needed and dedication
26 of commercial parts. 27
 Rotating Equipment Division Rotating Equipment Division

Performance FLOW - 50 Hz Radially Split Performance Radially Split

m3/h 2 5 10 25 50 100 200 500 1000 1500 Overhung Impeller m ft Double Casing
Curves gpm 5 10 25 50 100 250 500 1000 2500 5000 8000 Single Stage
Curves Pumps
ft m 18000
m ft
300 1000 750
200 Process Pumps 5000
750 600 16000
200 150

TDH - Variable Speeds

500 400
150 100 14000
100 4000
250 API 610 200
50

TDH - 60 Hz

TDH - 50 Hz
12000
50
100
100 ANSI & ISO 25 3000 10000
25
50
50 8000
10 25
10
2000
HDO & HDB
25 6000
5
5 4000
10
1000
10 2
gpm 5 10 25 50 100 250 500 1000 2500 5000 10000 2000
m3/h 2 5 10 25 50 100 200 500 1000 2000 gpm 250 500 1000 2500 5000 10000 15000 20000 30000

FLOW -60 Hz m3/h 100 200 500 1000 2000 3500 5000
FLOW - Variable Speeds

FLOW - 50 Hz Vertical Turbine,

FLOW - 50 Hz Radially Split m3/h 10 25 50 100 250 500 1000 2500 5000 10000 25000 50000 75000 Barrel And
m ft
m3/h 10 25 50 100 200 500 1000 1500 2500 Between Bearing 1000 3000
gpm 50 100 250 500 1000 2500 5000 10000 25000 50000 100000 200000 400000 Circulator Pumps
m ft gpm 25 50 100 250 500 1000 2500 5000 8000 12000 ft m Single and 750 2000 600
2000 600 2000 1500 400
800 500
2500
2000 1500 Two-Stage 1500 1000 300
600 400 750
1500 1000
Process Pumps 250
1000
500
200
400
250
250
1000 TSHO, DSTHO, DSTHF 750 500 100
Flowserve has developed 750 500 150 100 250
TDH - 60 Hz

TDH - 50 Hz
VLT & VTP

TDH - 60 Hz

TDH - 50 Hz
250 50
two sizing programs called 500
150
DSHF 100 50
HQ 100
PumpSel and Primer. Both of 100
250 25
100
these user-friendly programs 250 50 25
50
have many superior features 50
100
50 10
25
and capabilities which allow 100
25 10
25 VCT & VMT 5
easy and accurate sizing of 5 10
Flowserve pumps. gpm 25 50 100 250 500 1000 2500 5000 7500 1000015000
10 ft m
m3/h 10 25 50 100 200 500 1000 2000 3500
gpm 50 100 250 500 1000 2500 5000 10000 25000 50000 100000 250000 500000
FLOW -60 Hz m3/h 10 25 50 100 250 500 1000 2500 5000 10000 25000 50000 100000
FLOW -60 Hz

FLOW - 50 Hz Axially Split FLOW - 50 Hz Submersible

m3/h 50 100 150 200 300 500 1000 2000 3500 5000 9000
Casing Pumps m ft
m /h
3 10 25 50 100 250 500 1000 2000 3500 5000 Motor Pumps
gpm 25 ft m
m ft gpm 200 50 100 250 500 1000 2500 5000 10000 15000 20000
400 600 800 1500 2000 4000 8000 15000 20000 40000
1500 3000 1000
2500 ft m 4000
750
7000 1000 3000
5000 1500 2000
2000 750 500
2000 1500
1500 5000 3500
1000 500 1000 300
4000 2500
1000 750
3000 300 1000 200
2000
750 500
200
2000 MX, MSN, 1500
500
400 150 500 100
DVMX 250
TDH - 60 Hz

TDH - 60 Hz
TDH - 50 Hz

500 100

TDH - 50 Hz
1000 300
300 1000 700
250 M&H 50

200 50 100
200 DVS 500
100
25

150 500 350 50

100
250 50 10
100
10
250 50
150
50
DV 125 40
10
100
25 10
100 70
gpm 250 500 1000 2500 5000 10000 25000 50000 gpm 25 50 100 250 500 1000 2500 5000 10000 15000 25000
m3/h 100 200 500 1000 2000 5000 10000 m3/h 10 25 50 100 250 500 1000 2000 4000 6000
FLOW -60 Hz FLOW -60 Hz
28 29
 Rotating Equipment Division Rotating Equipment Division

Petroleum Chemical Power

Pump

al

n
on
Cross Reference

ge
tio
utic
ati

Pa
Sta
n

ty
ace
tio

l
Guide

ort

tili
ria
ing

alt

to
al
duc

nsp

arm

n-U
ust

eci

fer
fin

ntr
Pro

Ind
Tra

Re

No

Re
Sp

Ce
Ph
Pump Category Description Design Model
Chemical Process Metallic, Sealed ANSI Standard Mark III 4
ANSI and ISO Pumps ISO Standard Chemstar 4
High Head, Low Flow Mark III Lo-Flo 6
Dynamic Seal Mark III Sealmatic 6
Unitized, Self-Priming Mark III Self-Priming 6
Vortex Design, Large Solids Mark III Recessed Impeller 6
Vertical In-Line Mark II In-Line 6
Specialty Corrosives Mark II High Silicon Iron 6
Metallic, Mag Drive ANSI Standard Guardian 7
ISO Standard Chemstar MD 7
Non-Metallic, Sealed PFA Lined, ANSI/ISO PolyChem S Series 8
Solid FRP, ANSI PolyChem F Series 8
PFA Lined / FRP, ANSI PolyChem L Series 8
Non-Metallic, Mag Drive PFA Lined, ANSI/ISO PolyChem M Series 9
Petroleum Process Horizontal Overhung API 610 SCE 10
API 610 Pumps PHL 10
Mag Drive PHL-MAG 10
Vertical In-Line API 610 VIL-B 12
Close Coupled VIL 12
Double Suction VILDS 13
Diffuser Design PVML 13
Mag Drive PVML-MAG 13
Between Bearing, Radially Split Single Stage DSHF 14
Two Stage TSHO 15
Two Stage, Double Suction DSTHO, DSTHF 15
Horizontal Between Bearing Axially Split, Double Suction API 610 DVS 16
Single Stage Pumps General Service DV 16
HGT 16
Horizontal Between Bearing Single Casing High Pressure MX, MSN, DVMX 17
Multistage Pumps Double Casing High Pressure and HDO, HSO, HDOI, HSOI 18-19
High Temperature HDB, HSB, HDBI, HSBI 18-19
Vertical Pumps Pre-Engineered Vertical Turbine (2) Sumpmaster 20
HQ 20
Double Casing API 610 VLT 21
VMT 21
General Service VLT 21
VMT 21
Circulator Wet Pit, Dry Pit See Note 3 22
Concrete Volute BSV, BCV 24
Submersible Motor Pumps Oil Filled Vertical, Incline, Horizontal M, H 23
Note 1: Nuclear and Specialty Pumps also available. See pages 24 through 27.
Note 2: Deepwell design for irrigation and water supply services also available. See page 20.
Note 3: Includes HSPR, HX, KX, PHR, PMR, RX, VOA, VOP, VX and WX.
30 31