Scribd
Upload
51 views4 pages

The Device Name Will Be Show " ": Bluetooth - SPK

The document describes the specifications and features of a Bluetooth speaker module. It includes details such as its Bluetooth version (v2.1+EDR), dimensions of 18mm x 42mm, dual 35-40mW amplifier, volume control via a PIO11 pin, and operating temperature range of -5 to +45 degrees Centigrade. The module connects wirelessly via Bluetooth using GFSK modulation in the 2.4GHz band for wireless serial transmission with a maximum asynchronous rate of 2.1Mbps and works off a 3.7VDC, 50mA power supply.

Uploaded by

Fernando Martin Gaivazzi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
51 views4 pages

The Device Name Will Be Show " ": Bluetooth - SPK

The document describes the specifications and features of a Bluetooth speaker module. It includes details such as its Bluetooth version (v2.1+EDR), dimensions of 18mm x 42mm, dual 35-40mW amplifier, volume control via a PIO11 pin, and operating temperature range of -5 to +45 degrees Centigrade. The module connects wirelessly via Bluetooth using GFSK modulation in the 2.4GHz band for wireless serial transmission with a maximum asynchronous rate of 2.1Mbps and works off a 3.7VDC, 50mA power supply.

Uploaded by

Fernando Martin Gaivazzi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Product features

Audio Interface: 3.5mm/0.14in


Bluetooth specification v2.1 + EDR
High-board antennas
Dimensions: 18mm x 42mm
Dual 35-40mW Amplifier
+12dB to 33dB and CLass II
without password to connect
Volume up and down
Used for embedded wireless serial transmission alternatives

The device name will be show " Bluetooth_SPK"


Product Specifications
Bluetooth protocol Bluetooth Specification v2.1+EDR
USB protocol USB v1.1/2.0
Frequency 2.4GHz ISM band
Modulation GFSK(Gaussian Frequency Shift Keying)
Transmit power 4dBm, Class 2
Sensitivity -84dBm at 0.1% BER
Rate Asynchronous: 2.1Mbps(Max) / 160 kbps
Synchronous: 1Mbps/1Mbps
Power Supply +3.7VDC 50mA
Working temperature 5 ~ +45 Centigrade
PIN PURPOSE ACTION
#1 SPK L(-) , #2 SPK L(+) To speaker or AMP
#1 SPK R(-) , #2 SPK R(+) To speaker or AMP
#9 PIO11 Volume up HOLD 2 Sec
#9 PIO11 Volume down press
#15 SHTDWN SHUT DOWN ON/OFF TO Amplifier
#20 RESET NO USE AUTO RESET
#25 (VREN) ON/OFF HOLD 2-3 Sec
#25 (VREN) Aute Detect / Paired HOLD 5-6 Sec
#27 VBAT DC POWER 3.3-4.5V
#28 V_CHG BATTERY CHARGER IN 3.3-4.2V

You might also like