Scribd Logo
Upload

Welcome to Scribd!

  • 114 views

    17mb20!21!24 Programming Guide

    Uploaded by

    sluz2000
    This document provides instructions for programming an MB20-MB21-MB24 unit with new software. The steps include: 1. Installing driver software and connecting the programmer to the PC and unit via cables. 2. Putting the unit into download mode by pressing menu then 1905 on the remote. 3. Using the driver software to find and select the bootloader, read current version, erase flash, select the new software binary file, and load the file. 4. Checking the new software version in service mode after restarting the unit.

    Copyright:

    © All Rights Reserved
    Download as PPS, PDF, TXT or read online from Scribd

    17mb20!21!24 Programming Guide

    Uploaded by

    sluz2000
    114 views9 pages
    This document provides instructions for programming an MB20-MB21-MB24 unit with new software. The steps include: 1. Installing driver software and connecting the programmer to the PC and unit via cables. 2. Putting the unit into download mode by pressing menu then 1905 on the remote. 3. Using the driver software to find and select the bootloader, read current version, erase flash, select the new software binary file, and load the file. 4. Checking the new software version in service mode after restarting the unit.

    Original Description:

    Guide

    Copyright

    © © All Rights Reserved

    Available Formats

    PPS, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for programming an MB20-MB21-MB24 unit with new software. The steps include: 1. Installing driver software and connecting the programmer to the PC and unit via cables. 2. Putting the unit into download mode by pressing menu then 1905 on the remote. 3. Using the driver software to find and select the bootloader, read current version, erase flash, select the new software binary file, and load the file. 4. Checking the new software version in service mode after restarting the unit.

    Copyright:

    © All Rights Reserved
    Download as PPS, PDF, TXT or read online from Scribd
    Download as pps, pdf, or txt
    114 views9 pages

    17mb20!21!24 Programming Guide

    Uploaded by

    sluz2000
    This document provides instructions for programming an MB20-MB21-MB24 unit with new software. The steps include: 1. Installing driver software and connecting the programmer to the PC and unit via cables. 2. Putting the unit into download mode by pressing menu then 1905 on the remote. 3. Using the driver software to find and select the bootloader, read current version, erase flash, select the new software binary file, and load the file. 4. Checking the new software version in service mode after restarting the unit.

    Copyright:

    © All Rights Reserved
    Download as PPS, PDF, TXT or read online from Scribd
    Download as pps, pdf, or txt
    You are on page 1of 9

    MB20-MB21-MB24

    PROGRAMMING GUIDE
    1.Install Program Setup_Visual_I2C_v3-2-3b8h
    Create a folder as C:/ProgramFiles/Micronas and create Visual I2C folder
    inside that Micronas folder. (System creates all of that folders autometically, when
    Setup_Visual_I2C_v3-2-0.exe is loaded.)

    2.Install Driver Software MB20-21-24


    and LPT driver

    Install driver software MB20-21-24 inside . C:/ProgramFiles/Micronas/ Visual I2C


    Install Setup_LptDriver
    Setup_LptDriver into C:/Windows/System32

    3.Connect the Programmer to your PC via


    ParallelPort PL100

    4.Connect the Programmer to the Unit via Scart


    Cable PL103

    5.Connect 7 pin cable between PL1 common LPT


    Soket and PL2
    1.Enter the TV to Software download mode .
    Switch the TV on , press menu then enter 1905 on Remote Control .TV is been locked RC or Keyboard
    does not work

    2.Open the Folder of the driver Software

    3.Select the Folder vct49xyi_start.vi2c ( picture 1 ) Software


    download menu will appear on screen ( picture 2 ) .
    picture 1 picture 2
    Important: First of all you have
    to set the LPT settings with
    following values
    Delay = 5 ms
    Timeout = 100 ms

    4. Select find window as in picture 1 and write bootloader in the find section of the submenu . After pressing the
    start icon search process will be activated and all available folders will be listed on screen.
    5.Select the bootloader.bat
    folder
    by double click .

    The main window will come to the screen


    for loading the binary file.

    6. Click over the


    bootloader icon
    for prepearing to loading.

    TV will go to stand-by mode if bootloder


    process was achived. And below window
    will appear on the tv screen.
    7.After bootloader
    process, activate
    the read process
    by click the Read
    them section as
    shown on the
    picture .

    At the End of the


    read process
    bootloader version
    will appear on
    screen , depending
    on the bootloader
    version as 21 or 22
    8.Erase the flash by enter the
    Erase Flash icon on screen

    9.To select the wanted


    Software Binary File double
    click the area on the left
    handside of the Load Bin icon.
    On screen a Seb Menu will
    appear
    Choose the path of
    the Software Binary
    File in the Name
    section

    Enter the following


    values to the
    Address and I2C
    Register
    to=0x7FFF
    reclen=16.
    10. Finally click to Load
    Bin Flash icon Loading
    will be started
    automatically.
    After the loading process
    switch off the TV

    Service Mode

    First APS No
    BURN_IN_MO No
    FACTORY
    VCTI DAC
    Check the Version of the Txt & FE OSD
    Options 1
    Software by Enter the Options 2
    Audio Options
    Service Auto
    INIT No
    Mode of the TV NVM
    SELECTED A201SN02_V4

    Press Menu and then 4 7


    2 5 Remote Control Type: RC
    17MB24 by Vestel R&D

    on the Remote Control 17MB24_STD_0.0.103 Exit:


    TV

    You might also like