Nsclient Windows Nagios PDF

Nagios XI Installing The Windows Agent:
NSClient++
The Industry Standard in IT Infrastructure Monitoring
Purpose
This document describes the procedures for installing Nagios monitoring agent, NSClient++, on a target Microsoft Windows desktop or
server for the purposes of monitoring that machine with Nagios XI. This allows organizations to monitor vital metrics and ensure that
a specific Windows desktop machine or server is functioning properly.
Target Audience
This document is intended for use by Nagios Administrators and IT desktop support staff who wish to monitor their Windows machines
and are familiar with installing Windows applications.
Alternative Agents
NSClient++ is one of many agents that can be used to monitor Windows devices. This document will go through the installation and
use of NSClient++. However, for ease of use and greater functionality, Nagios Enterprises recommends using a multi-platform agent
called NCPA that can be downloaded for Windows, Linux, and Mac devices. For more information on NCPA, view the documentation
here:
NCPA Installation Instructions
http://assets.nagios.com/downloads/ncpa/docs/html/installation.html
NSClient++ Overview
First, the NSClient++ agent must be downloaded. There are two ways to do this:
From Nagios XI web interface when using the Windows Desktop or Windows Server monitoring wizards
From the NSClient++ downloads page at http://nsclient.org/download/
The NSClient++ agent must be installed on the target Windows machine and configured before Nagios can monitor system metrics,
services, processes, or performance data on the target machine using the Windows Server or Windows Desktop configuration
wizards.
Nagios Enterprises, LLC US: 1-888-NAGIOS-1 Web: www.nagios.com Page 1

P.O. Box 8154 Int'l: +1 651-204-9102 Email: [email protected]
Saint Paul, MN 55108 Fax: +1 651-204-9103
USA
Copyright 2016 Nagios Enterprises, LLC
Revision 1.1 November, 2016
NSClient++
Installing The Agent
Log on to the windows machine you wish to install the NSClient++
agent on.
Run the NSClient++ installer package to start the installation.
The welcome screen will appear.
Click Next to continue to the next step.
Select Generic and click Next to continue.
Click the Typical button.

Saint Paul, MN 55108 Fax: +1 651-204-9103
USA
NSClient++
In the next step you will need to configure the NSClient++ agent.
Enter the IP address(s) of the Nagios XI server(s) in the Allowed

hosts box. In this example you can see two addresses have been
added (10.25.5.11 and 10.25.5.12 separated by a comma).
Enter a password in the Password box that is required for

communication between the Nagios server and the Windows machine
(used by check_nt plugin).
Enable common check plugins = Checked

Enable nsclient server (check_nt) = Checked
In the screenshot, NRPE has not been selected as it is not required

by the using the Windows Server or Windows Desktop
configuration wizards. NRPE does offer advanced monitoring
capabilities however this is beyond the scope of this guide.
Click Next to continue.
Click the Install button on the next screen to begin the installation.
You may be prompted to grant permission to the installer to make

changes to the computer, click Yes to continue.

Saint Paul, MN 55108 Fax: +1 651-204-9103
USA
NSClient++
Wait while NSClient++ is installed and click Finish to complete the

setup.
The NSClient++ agent will now be running as a service, which means

the Windows machine is ready to be monitored with Nagios.
Configuring NRPE in NSClient++
Please refer to the following documentation that will show you how to enable NRPE in NSClient++:
https://assets.nagios.com/downloads/nagiosxi/docs/Enabling_the_NRPE_Listener_in_NSClient_0.4.x.pdf
Finishing Up
You should now have the NSClient++ windows monitoring agent installed on your target window machine. For any support related
questions about monitoring a windows machine or any other support related questions, please visit the Nagios Support Forums at:
http://support.nagios.com/forum/

Saint Paul, MN 55108 Fax: +1 651-204-9103
USA

Nsclient Windows Nagios PDF

Uploaded by

Copyright:

Available Formats

Nsclient Windows Nagios PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Nsclient Windows Nagios PDF

Uploaded by

Copyright:

Available Formats

Nagios XI Installing The Windows Agent:

The Industry Standard in IT Infrastructure Monitoring

From the NSClient++ downloads page at http://nsclient.org/download/

Nagios Enterprises, LLC US: 1-888-NAGIOS-1 Web: www.nagios.com Page 1

Run the NSClient++ installer package to start the installation.

The welcome screen will appear.

Click Next to continue to the next step.

Select Generic and click Next to continue.

Click the Typical button.

Nagios Enterprises, LLC US: 1-888-NAGIOS-1 Web: www.nagios.com Page 2

Enter the IP address(s) of the Nagios XI server(s) in the Allowed

Enter a password in the Password box that is required for

Enable common check plugins = Checked

In the screenshot, NRPE has not been selected as it is not required

Click Next to continue.

You may be prompted to grant permission to the installer to make

Nagios Enterprises, LLC US: 1-888-NAGIOS-1 Web: www.nagios.com Page 3

Wait while NSClient++ is installed and click Finish to complete the

The NSClient++ agent will now be running as a service, which means

Configuring NRPE in NSClient++

Nagios Enterprises, LLC US: 1-888-NAGIOS-1 Web: www.nagios.com Page 4

You might also like