Scribd Logo
Upload

Welcome to Scribd!

  • 1K views

    Questions Refrigeration and Air Conditioning

    Uploaded by

    Gp Mishra
    This document contains 20 multiple choice questions about refrigeration and air conditioning systems. The questions cover topics like standard ice point temperatures, components of refrigeration cycles like compressors, expansion devices, and refrigerants. They also address concepts such as critical pressures, temperatures encountered in cycles, purposes of subcooling, and definitions of units like tons of refrigeration.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Questions Refrigeration and Air Conditioning

    Uploaded by

    Gp Mishra
    1K views4 pages
    This document contains 20 multiple choice questions about refrigeration and air conditioning systems. The questions cover topics like standard ice point temperatures, components of refrigeration cycles like compressors, expansion devices, and refrigerants. They also address concepts such as critical pressures, temperatures encountered in cycles, purposes of subcooling, and definitions of units like tons of refrigeration.

    Original Description:

    Practice Questions for Mechanical Engg students on Refrigeration and Air conditioning.

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document contains 20 multiple choice questions about refrigeration and air conditioning systems. The questions cover topics like standard ice point temperatures, components of refrigeration cycles like compressors, expansion devices, and refrigerants. They also address concepts such as critical pressures, temperatures encountered in cycles, purposes of subcooling, and definitions of units like tons of refrigeration.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    1K views4 pages

    Questions Refrigeration and Air Conditioning

    Uploaded by

    Gp Mishra
    This document contains 20 multiple choice questions about refrigeration and air conditioning systems. The questions cover topics like standard ice point temperatures, components of refrigeration cycles like compressors, expansion devices, and refrigerants. They also address concepts such as critical pressures, temperatures encountered in cycles, purposes of subcooling, and definitions of units like tons of refrigeration.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 4

    Questions Refrigeration and Air Conditioning

    1. A standard ice point temperature corresponds to the temperature of


    (a) water at 0C
    (b) ice at 4C
    (c) solid and dry ice
    (d) mixture of ice, water and vapour under equilibrium conditions under NTP conditions
    (e) mixture of ice and water Under equilibrium conditions.

    2. Ammonia-absorption refrigeration cycle requires


    (a) very little work input
    (b) maximum work input
    (c) nearly same work input as for vapour compression cycle
    (d) zero work input
    (e) none of the above.

    3. In vapour compression cycle, the condition of refrigerant is saturated liquid


    (a) after passing through the condenser
    (b) before passing through the condensei
    (c) after passing through the expansion throttle valve
    (d) before entering the expansion valve
    (e) before entering the compressor.

    4. The moisture in a refrigerant is removed by


    (a) evaporator
    (b) safety relief valve
    (c) dehumidifier
    (d) driers
    (e) expansion valve

    5. Critical pressure of a liquid is the pressure


    (a) above which liquid will remain liquid
    (b) above which liquid becomes gas
    (c) above which liquid becomes vapour
    (d) above which liquid becomes solid
    (e) at which all the three phases exist together.

    6. The refrigerant for a refrigerator should have


    (a) high sensible heat
    (b) high total heat
    (c) high latent heat
    (d) low latent heat
    (e) low sensible heat

    7. The domestic refrigerator uses following type of compressor


    (a) centrifugal
    (b) axial
    (c) miniature sealed unit
    (d) piston type reciprocating
    (e) none of the above.

    8. Domestic refrigerator working on vapour compression cycle uses the following type of
    expansion device
    (a) electrically operated throttling valve
    (b) manually operated valve
    (c) thermostatic valve
    (d) capillary tube
    (e) expansion valve.

    9. Highest temperature encountered in refrigeration cycle should be


    (a) near critical temperature of refrigerant
    (b) above critical temperature
    (c) at critica. temperature
    (d) much below critical temperature
    (e) could be anywhere.

    10. One of the purposes of sub-cooling the liquid refrigerant is to


    (a) reduce compressor overheating
    (b) reduce compressor discharge temperature
    (c) increase cooling effect
    (d) ensure that only liquid and not the vapour enters the expansion (throttling) valve
    (e) none of the above.
    11. Formation of frost on evaporator in refrigerator
    (a) results in loss of heat due to poor heat transfer
    (b) increases heat transfer rate
    (c) is immaterial
    (d) can be avoided by proper design
    (e) decreases compressor power.

    12. Pick up the correct statement about giving up of heat from one medium to other in ammonia
    absorption system
    (a) strong solution to weak solution
    (b) weak solution to strong solution
    (c) strong solution to ammonia vapour
    (d) ammonia vapour to weak solution
    (e) ammonia vapour to strong solution.

    13. Highest pressure encountered in a refrigeration system should be


    (a) critical pressure of refrigerant
    (b) much below critical pressure
    (c) much above critical pressure
    (d) near critical pressure
    (e) there is no such restriction.

    14. In a refrigeration cycle, the flow of refrigerant is controlled by


    (a) compressor
    (b) condenser
    (c) evaporator
    (d) expansion valve
    (e) all of the above.

    15. Pick up the incorrect statement


    (a) lithium bromide used in vapour absorption cycle is nonvolatile
    (b) lithium bromide plant cant operate below 0C
    (c) a separator is used in lithium bromide plant to remove the unwanted water vapour by
    condensing
    (d) concentration of solution coming out of lithium bromide generator is more in comparison to
    that entering the generator
    (e) weak solution in liquid heat exchanger gives up heat to the strong solution.

    16. One ton of the refrigeration is


    (a) the standard unit used in refrigeration problems
    (b) the cooling effect produced by melting 1 ton of ice
    (c) the refrigeration effect to freeze 1 ton of water at 0C into ice at 0C in 24 hours
    (d) the refrigeration effect to produce 1 ton of ice at NTP conditions
    (e) the refrigeration effect to produce 1 ton of ice in 1 hour time.

    17. Under-cooling in a refrigeration cycle


    (a) increases COP
    (b) decreases COF
    (c) COP remains unaltered
    (d) other factors decide COP
    (e) unperdictable.

    18. Reducing suction pressure in refrigeration cycle


    (a) lowers evaporation temperature
    (b) increases power required per ton of refrigeration
    (c) lowers compressor capacity because vapour is lighter
    (d) reduces weight displaced by piston
    (e) all of the above.

    19. The C.O.P. of a refrigeration cycle with lowering of condenser temperature, keeping the
    evaporator temperature constant, will
    (a) increase
    (b) decrease
    (c) may increase or decrease depending on the type of refrigerant used
    (d) remain unaffected
    (e) unpredictable.

    20. Allowable pressure on high-pressure side or ammonia absorption system is of the order of
    (a) atmospheric pressure
    (b) slightly above atmospheric pressure
    (c) 2-4 bars
    (d) 5-6 bars
    (e) 7-10 bars.

    You might also like