Hybrid NPT 1030 Product Note 2

NPT-1030
HYBRID METRO ACCESS

TRANSPORT
The NPT-1030 platform belongs to ECIs Neptune product line. It is a
compact, robust, and fully redundant all-native multiservice packet optical
transport system for metro access networks. NPT-1030 features built-in modularity and Ethernet/MPLS-TP
and TDM service support. It is part of ECIs SmartLight framework for smooth and cost-effective transition
from TDM to packet. The unit is only 1RU in height, fully redundant, and supports up to 60 Gbps of packet
switching capacity and 15 Gbps of TDM switching capacity.
Neptune streamlines end-to-end metro service delivery by combining carrier-grade service assurance, visibility,
and control with packet efficiency and unparalleled multiservice support. It offers a powerful, flexible, and
efficient E2E metro solution for high-performance services through convergence of TDM, Ethernet, MPLS,
and WDM.
With such a rich and powerful feature set, NPT-1030 is well-suited for a wide variety of applications and
networking scenarios. These include mobile backhaul, utilities, wholesale services, residential multiplay and
business VPN connectivity services. NPT-1030 is managed by ECIs unified multilayer LightSoft NMS.
Unmatched Compact and Carrier-grade Independent native

multiservice redundant service assurance processing
native TDM, Ethernet, CES metro access both TDM and Ethernet
MPLS-TP
Technical specifications
Packet Switch: 60 Gbps
Services: MEF CE2.0 (E-Line, E-LAN, E-Tree, E-Access) PN and VPN based Ethernet and MPLS -TP, , Ethernet over PDH (EoP) Ethernet over
Copyright 2015 ECI. All rights reserved. Information in this document is subject to change without notice. ECI assumes no responsibility for any errors that may appear in this document.
SDH (EoS) , MPLS over Transport (MoT), MPLS over Ethernet (MoE)
Max. Interfaces: 12/8 x 100/1000 FX, , 4 x 10GBE
TDM Matrix: 15 Gbps with 4/3/1 connectivity (100% LO granularity)
Services: Native TDM, CES (SAToP , CESoPSN)
Max. Native Interfaces: 5 x STM-16, 20 x STM-4, 20 x STM-1, 9 x DS3/E3, 189 x E1
Max. CES Interfaces: 12 x STM-1, 3 x STM-4
WDM CWDM, DWDM, amplifiers
Timing and Synchronization SyncE with ESMC, 1588v2, Internal Stratum 3 clock (holdover state), Primary and secondary sources (supports SSM bits), ACR, DCR, loop timing on
SAToP, TDM bits (T3/T4)
Protection and restoration HW redundancy for common units, IO Hardware protection (IOP), RSTP/MSTP, G.8032 Ethernet Ring Protection (ERPS), MPLS-TP FRR, Dual FRR, 1:1
Linear protection, PW Redundancy (PWR, IEEE 802.3ad Ethernet Link Aggregation(LAG) with LACP
OAM Ethernet OAM (IEEE802.3AH,IEEE 802.1ag and ITU-T Y.1731 PM), LSP Ping, MPLS-TP OAM (G8113.2)(CC/AIS/RDI/LB/LT/DM), Bidirectional
Forwarding Detection (BFD), RFC 2544 Generator
Traffic management Traffic Classification (based on Port, VLAN, Port+VLAN, IEEE 802.1p, IPv4/IPv6 TOS and DSCP), Diffserv based TM, Network wide Call Admission
Control (CAC), 8 Classes of Service (CoS)
Topologies Mesh, Dual homing , multi-ring, ring, star, linear
Security RADIUS (client authentication), SSH 2 , SW integrity verification (SHA-2), SFTP, Access Control List (ACL), , Public key authentication,
Port blocked as default
Management LightSoft NMS, EMS-NPT, SNMPv2/v3, LCT
Power over Ethernet (PoE+) Up to 30W
Pluggable SFP/ SFP+ / support Electrical, Colored C/DWDM, Tunable, SFP+ , bidirectional SFPs/SFP+
Maximum distance 600 km, Single span 330 km
Power input -40 VDC to -75 VDC, 220V
Power dissipation Typical: 70W
Operating temperature range -25C to +70C (-13F to 158F)
Operating RH range 5% to 95%
Environmental standards ETS 300 019-1-3 Class 3.3
ETS 300 019-1-1 Class 1.2
ETS 300 019-1-2 Class 2.
Safety EN 60950/2000, according to LVD Directive 72/23/EEC
EN 60825 -1&2
Physical dimensions 44 (H) x 465 (W) x 263 (D)
Expansion Unit
Packet Max. service interfaces: 12 x 100/1000Base-X, 36 x 10/100/1000 Base-T
TDM Max. Service interfaces:
Native: 189 x E1/T1, 9 x E3/DS, 12 x STM-1/OC-3
CES: 96 x E1
72 x (nx64Kbps ,FXO, FXS, 2/4W E&M, V24 (RS232) , V35, V36 ,V11, RS422, RS449, C37.94, OMNI, CODIR , G.703 64K)
Physical dimensions H x W x D: 3.5 x 17.4 x 9.6 / 88 x 443 x 243 mm
Specifications subject to change without notice
Contact us to find out how our ELASTIC networks can help your business grow
ABOUT ECI
ECI is a global provider of ELASTIC network solutions to CSPs, utilities as well as data center operators. Along with
its long-standing, industry-proven packet-optical transport, ECI offers a variety of SDN/NFV applications, end-to-end
network management, a comprehensive cyber security solution, and a range of professional services. ECI's ELASTIC
solutions ensure open, future-proof, and secure communications. With ECI, customers have the luxury of choosing a
network that can be tailor-made to their needs today while being flexible enough to evolve with the changing needs
of tomorrow. For more information, visit us at www.eci tel e.com

Hybrid NPT 1030 Product Note 2

Uploaded by

Copyright:

Available Formats

Hybrid NPT 1030 Product Note 2

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Hybrid NPT 1030 Product Note 2

Uploaded by

Copyright:

Available Formats

NPT-1030

HYBRID METRO ACCESS

Unmatched Compact and Carrier-grade Independent native

Specifications subject to change without notice

You might also like