5549--- 1209--- R8

Technical Data
Specifications & Capacities

Telescopic Crawler Crane

75 Ton (70 metric ton)

CAUTION: This material is supplied for reference use

only. Operator must refer to in--- cab Crane Rating
Manual and Operators Manual to determine
allowable crane lifting capacities and assembly and
operating procedures.

Link-Belt Cranes TCC--- 750

5549--- 1209--- R8

TCC--- 750 Link-Belt Cranes

 5549--- 1209--- R8

Table Of Contents
Upper Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Hydraulic System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Load Hoist Drums . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Swing System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Counterweight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Operators Cab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Rated Capacity Limiter System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Machinery House . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Catwalks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Optional Vandal Guards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Lower Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Carbody . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Side Frames . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Travel and Steering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Optional Tool Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Boom and Attachments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Boom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Boom Wear Pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Boom Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Boom Elevation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Optional Auxiliary Lifting Sheave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Optional Hook Blocks And Balls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Optional Fly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Work Platform/Auger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Base Crane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Auxiliary Lifting Sheave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Counterweights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Hook Balls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Hook Blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Working Weights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Transport Drawing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Load Hoist Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Working Areas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Boom Extend Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Attachments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Main Boom Working Range Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Main Boom + Fly Working Range Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Main Boom Load Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Main Boom + Fly Load Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Link-Belt Cranes TCC--- 750

5549--- 1209--- R8

TCC--- 750 Link-Belt Cranes

5549--- 1209--- R8
1

Upper Structure
Hydraulic Reservoir House Lock --- Two---position house lock
Frame 165 gal (625L) capacity equipped with (boom over front or rear) operated from
sight level gauge. Diffusers built in for the operators cab
All welded steel frame with precision ma-
deaeration.
chined surfaces for mating parts. Counterweight
Turntable Bearing Filtration
S Inner race is bolted to upper frame One 10 micron, full flow return line fil- Consists of a five piece design.
S Outer race with external swing gear is ter. Accessible for easy filter replace- S One A counterweight, 12,000 lb
bolted to lower frame ment. (5 443kg)
Counterbalance Valves S One B counterweight, 11,500 lb
Engine All hoist motors are equipped with coun-
(5 216kg)
S One C counterweight, 11,500 lb
Engine terbalance valves to provide positive load
(5 216kg)
lowering and prevent accidental load
Full pressure lubrication, oil filter, air S Two A carbody counterweights,
drop if the hydraulic pressure is suddenly
cleaner, hour meter, throttle, and electric 5,000 lb (2 268kg) each
lost.
control shutdown.
Load Hoist Drums Operators Cab
Specification CAT C6.6
Fully enclosed modular steel compart-
Numbers of Cylinders 6 Main and Optional Auxiliary Winches
ment is independently mounted and
S Axial piston, full and half displacement padded to protect against vibration and
Cycle 4
(2---speed) motor driven through noise.
4.13 x 5.00 planetary reduction unit for positive S All tinted/tempered safety glass
Bore and Stroke: inch (mm)
(105 x 127) control under all load conditions. S Sliding entry door and front and rear
Piston Displacement: in3 (L) 402.7 (6.6) S Grooved lagging window
S Power up/down mode of operation S Swing up roof window with windshield
Max. Brake Horsepower: hp 262 (195) @ S Hoist drum cable follower --- optional
(kW) 2,000 rpm wiper
S Drum rotation indicator S Door and window locks
775 (1 050) @ S Drum diameter: 16 in (40.6cm) S Hot water heater
Peak Torque: ft lb (Nm) S Rope length:
1,400 rpm S Air conditioner
S Main: 630 ft (192.0m)
Alternator: volts --- amps 12 --- 150 S Sun visor
S Auxiliary: 500 ft (152.4m) or 630 ft S Cloth seat
Crankcase Capacity: qt (L) 18.4 (17.4) (192.0m) S Circulating fan
S Hydraulic driven fan and thermostatical- S Maximum rope storage: 834 ft (254.2m) S Windshield wipers and washer
ly controlled radiator S Terminator style socket and wedge S Dry chemical fire extinguisher
Third wrap indicator --- optional --- Visu- S Engine instrumentation panel (tachome-
Fuel Tank ally and audibly warns the operator when ter, voltmeter, engine oil pressure, en-
One 80 gal (303L) capacity fuel tank. the wire rope is on the first/bottom layer gine water temperature, fuel level, hy-
and when the wire rope is down to the last draulic oil temperature, hour meter, and
Hydraulic System three wraps service monitor system)
S Mechanical drum rotation indicators for
Hydraulic Pumps Swing System main (rear) and auxiliary (front) hoist
The pump arrangement is designed to drums
provide hydraulically powered functions Motor/Planetary --- Bi ---directional hy- S Six way adjustable seat
allowing positive, precise control with in- draulic swing motor mounted to a plane- S Foot throttle
dependent or simultaneous operation of tary reducer for 360 continuous smooth S Joystick controls
all crane functions. swing at 2.0 rpm S Optional fully adjustable single axis
S Two variable displacement pumps Swing Park Brake --- 360, electric over controls
provide independent control for hoist hydraulic, (spring applied/hydraulic re- S Bubble type level
drums, boom hoist, boom extend, and leased) multi ---disc brake mounted on the S Ergonomic gauge layout
right & left travel. speed reducer. Operated by a switch in S Controls shut off lever
S Three gear type pumps are used for the the operators cab. S AM/FM Radio
swing, retract cylinders & operators Swing Brake --- 360, foot operated, hy- S Travel levers & pedals
controls, engine cooling fan, and draulic applied disc brake mounted to the
hydraulic oil cooling fan. speed reducer

Link-Belt Cranes TCC--- 750

2 5549--- 1209--- R8

S Boom angle
Rated Capacity Limiter S Radius of load Machinery House
System S Actual load
S Operator settable alarms (include): Hinged doors (four on right side, one on
Microguard graphic audio---visual warn- S Maximum and minimum boom left side) for machinery access.
ing system with anti ---two block and func- angles
tion limiter. Operating data available in- S Maximum tip height
Catwalks
cludes: S Maximum boom length
S Crane configuration Standard on right and left sides. Catwalks
S Swing left/right positions fold up and pin for reduced travel width.
S Boom length S Operator defined area (imaginary
S Boom head height
S Allowed load and % of allowed load
plane) Optional Vandal Guards
S Data logging
Under design

Lower Structure
Track Rollers
Carbody S Twelve sealed (oil filled) track rollers per Travel and Steering
side frame
Lower Frame S Heat treated, mounted on anti---friction Each side frame contains a pilot con-
All welded box construction frame with bearings trolled, bi ---directional, axial piston motor
precision machined surfaces for turntable and a planetary gear reduction unit to pro-
Tracks
bearing and rotating joint. vide positive control under all load condi-
Heat treated, self ---cleaning grouser tions.
Side Frames shoes and heat treated track pins with dirt S 2---speed travel
seals. 61 track shoes per side. S Individual control provides smooth,
Side Frames S Optional flat or street pad precise maneuverability including full
All welded, precision machined, steel Take Up Idlers counter---rotation.
frames can be hydraulically extended and Cast steel, heat treated, self ---cleaning, S Spring applied, hydraulically released
retracted with a hydraulic cylinder mounted on sealed tapered roller bear- multiple wet---disc type brake con-
mounted in the lower frame. ings trolled automatically
S 14 ft (4.27m) extended gauge S Maximum travel speed is 1.3 mph
S 11 ft 11 in (3.63m) intermediate gauge (1.9km/h).
S 8 ft 5 in (2.57m) retracted gauge S Designed to 40% gradeability
S 20 ft 8.25 in (6.31m) overall length
S 36 in (0.91m) wide track shoes
Optional Tool Boxes
S Sealed (oil filled) idler and drive plane-
Two heavy duty steel design tool boxes
taries
that bolt onto the carbody counter-
S Compact travel drives
weights.
S Hydraulic self adjusting tracks

TCC--- 750 Link-Belt Cranes

5549--- 1209--- R8
3

Boom and Attachments

Design Boom Wear Pads Optional Hook Blocks
And Balls
Four section, formed construction of extra S Wear pads with Teflon inserts that
high tensile steel consisting of one base self---lubricate the boom sections S 40 ton (36.3mt) 4 sheave quick---reeve
section and three telescoping sections. S Top and bottom wear pads are hook block with safety latch
Two plate design of each section has mul- universal for all boom sections S 60 ton (54.4mt) 4 sheave quick---reeve
tiple longitudinal bends for superior hook block with safety latch
strength. The first telescoping section ex- Boom Head S 75 ton (68.0mt) 5 sheave quick---reeve
tends independently by means of one hook block with safety latch
S Five 16.5 in (41.9cm) root diameter S 8.5 ton (7.7mt) swivel and non---swivel
double ---acting, single stage hydraulic
nylon sheaves to handle up to ten parts hook balls with safety latch
cylinder with integrated holding valves.
of line S 10 ton (9.1mt) swivel and non---swivel
The second and third telescoping sec-
S Easily removable wire rope guards hook balls with safety latch
tions extend proportionally by means of
S Rope dead end lugs on each side of the
one double ---acting, single stage cylinder
with integrated holding valves and cables.
boom head Optional Fly
S Boom head is designed for
quick---reeve of the hook block S 35 ft (10.7m) one piece lattice fly,
Boom
stowable, offsettable to 2, 15, 30,
S 38.6---115.6 ft (11.8 ---35.2m) four Boom Elevation and 45. Maximum tip height is 156 ft
section boom (47.55m).
S One double acting hydraulic cylinder S 35---58 ft (10.7 ---17.7m) two piece
S Two boom extend modes (A---max and
with integral holding valve bi---fold lattice fly, stowable, offsettable
Standard), controlled from the
S Boom elevation: ---3 to 80 to 2, 15, 30, and 45. Maximum tip
operators cab, provide superior
capacities by varying the extension of height is 179 ft (54.56m).
Optional Auxiliary Lifting
the telescoping sections:
S A ---max Mode extends to 64.2 ft
Sheave Work Platform/Auger
(19.6m) S Single 16.5 in (41.9m) root diameter S Under design
S Standard mode extends to 115.6 ft nylon sheave
(35.2m) S Easily removable wire rope guard
S Mechanical boom angle indicator S Does not affect erection of the fly or use
S Maximum tip height for each extend of the main head sheaves
mode is:
S A ---max Mode is 72 ft (21.9m)
S Standard Mode is 122 ft (37.2m)

Link-Belt Cranes TCC--- 750

4 5549--- 1209--- R8

Dimensions
Base Crane
General Dimensions English Metric
Basic Boom 38.6---115.6 ft 11.7 ---35.2m

Minimum Load Radius 10 ft 3.05m

Maximum Boom Angle 80 80

Track Shoe Width 36 in 0.91m

of
Rotation
2 6.75 38 7.75
(0.78m) (11.78m) 1 5.25
7 0 (0.44m)
(2.13m)

10 5.5 10 9.5
(3.19m) (3.29m)

5 3.25 10 4.75
4 7.75
(1.61m) (3.17m)
(1.42m)

8 7 8 7.75
10.75 (2.62m) (2.64m)
(0.27m) 17 2.75
(5.25m)
10 5 10 3.5
(3.17m) (3.14m)
20 8.25
(6.31m)
47 1
(14.35m)
48 9.25
(14.87m)

TCC--- 750 Link-Belt Cranes

5549--- 1209--- R8
5

of
Tailswing Radius Rotation
14 6.87 (4.44m)

8 10.87 (2.71m)
of Front Winch
11 1.5 (3.39m)
of Rear Winch

12 8
(3.86m)
9 10.37 10 3.5
(3.01m) (3.14m)

18.91 18.91
18.91
(0.48m) (0.48m)
(0.48m)
14 11 11 8 5
(4.27m) (3.63m) (2.57m)
17 14 11 11 5
(5.18m) (4.53m) (3.48m)

Extended Gauge Intermediate Gauge Retracted Gauge

Link-Belt Cranes TCC--- 750

6 5549--- 1209--- R8

Auxiliary Lifting Sheave

Auxiliary Lifting Sheave L
Length 34.88 in (0.89m)
Width 16.31 in (0.41m)
Height 19 in (0.48m)
Weight 84 lb (38kg)
W

Fly
35 ft (10.7m) One Piece L
Lattice Fly (Base Fly)
Length 35 ft (10.67m) W
Width 29 in (0.74m)
Height 40 in (1.02m)
Weight 1,580 lb (717kg)
H

23 ft (7.01m) Lattice Fly Tip L

(Addition To Base Fly For
35---58 ft (10.7---17.7m) W
Bi ---fold Fly)
Length 23 ft (7.01m)
Width 14 in (0.36m)
Height 22 in (0.56m) H
Weight 670 lb (304kg)

Number inside black circle = # of components

* --- Optional equipment

TCC--- 750 Link-Belt Cranes

 5549--- 1209--- R8
7

Counterweights W

A Counterweight
Length 44.50 in (1.13m)
Width 9 ft 10 in (3.00m)
L
Height 6 ft 0.5 in (1.84m)
Weight 12,000 lb (5 443kg)

B & C Counterweights W
Length 44.50 in (1.13m)
Width 9 ft 10 in (3.00m)
Height 17.50 in (0.44m)
Weight 11,500 lb (5 216kg)
L

A Carbody
Counterweights
Length 53.12 in (1.35m) W
Width 32 in (0.81m)
Height 19 in (0.48m)
Weight 5,000 lb (2 268kg)

H
Number inside black circle = # of components
* --- Optional equipment

Link-Belt Cranes TCC--- 750

8 5549--- 1209--- R8

Hook Balls W

8.5 Ton (7.7mt) Swivel

Hook Ball*
H
Width 14.50 in (0.37m)
Height 33.75 in (0.86m)
Weight 360 lb (163kg)

W
8.5 Ton (7.7mt) Non ---Swivel
Hook Ball*
Width 16.50 in (0.42m) H
Height 35 in (0.89m)
Weight 360 lb (163kg)

Hook Blocks
40 Ton (36.3mt) W1 W2
4---Sheave Hook Block*
Width1 19.50 in (0.50m)
Width2 18 in (0.46m)
Height 48 in (1.22m)
Weight 900 lb (408kg) H

W1 W2
60 Ton (54.4mt)
4---Sheave Hook Block*
Width1 20.25 in (0.51m)
Width2 20 in (0.51m)
Height 54 in (1.37m) H
Weight 1,110 lb (503kg)

W1 W2
75 Ton (68.0mt)
5---Sheave Hook Block*
Width1 21.25 in (0.54m)
Width2 20 in (0.51m)
Height 63.25 in (1.61m)
H
Weight 1,410 lb (640kg)

Number inside black circle = # of components

* --- Optional equipment

TCC--- 750 Link-Belt Cranes

5549--- 1209--- R8
9

Working Weights
Ground
Bearing
Gross Weight Pressure
Option Description
lb (kg) (on soft
ground)
psi (kg/cm 2)
Base crane, ABC counterweight, 2 piece carbody counterweight, 630 ft (192.0m) type ZB main wire rope, 500 ft
145,470 9.71
1 (152.4m) type ZB auxiliary wire rope, 1 --- piece fly, 60 ton (54.43mt) 4 sheave hook block, 8.5 ton (7.71mt) hook
ball, and a 200 lb (90.7kg) operator. (65 985kg) (0.68)

Notes: Ground bearing pressure is based on the total weight distributed evenly over the track contact area.

Transport Drawing of
Rotation

22.3
(0.57m)

12 4.75
(3.78m)

24
(0.61m)

Transport Weight --- 99,960 lb (45 342kg)

Base crane, 630 ft (192.0m) type ZB main wire rope, 500 ft (152.4m) type ZB auxiliary wire
rope, 1 --- piece fly, 60 ton (54.43mt) 4 sheave hook block, and 8.5 ton (7.71mt) hook ball.

Load Hoist Performance

Main (Rear) and Auxiliary (Front) Winches --- 3/4 in (19mm) Rope
Maximum Line Pull Normal Line Speed High Line Speed Layer Total
Layer lb kg ft/min m/min ft/min m/min ft m ft m
1 16,880 7 656.6 183 55.8 364 110.9 114 34.7 114 34.7
2 15,519 7 039.3 200 61.0 396 120.7 124 37.8 238 72.5
3 14,362 6 514.5 216 65.8 428 130.5 134 40.8 372 113.4
4 13,365 6 062.3 232 70.7 460 140.2 144 43.9 516 157.3
5 12,497 5 668.5 248 75.6 492 150.0 154 46.9 670 204.2
6 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 164 50.0 834 254.2
Maximum
Diameter
Wire Rope Application Type Permissible Load
in mm lb kg
34x7 rotation resistant --- right regular lay or right lang lay
Standard 3/4 19 15,600 7 076.2
(Type ZB)
Main (Rear) Winch
18x19 rotation resistant --- right regular lay or right lang lay
Optional 3/4 19 12,920 5 860.5
(Type RB)
Auxiliary (Front) Standard 3/4 19 34x7 rotation resistant --- right regular lay (Type ZB) 15,600 7 076.2
Winch Optional 3/4 19 18x19 rotation resistant --- right regular lay (Type RB) 12,920 5 860.5

Link-Belt Cranes TCC--- 750

10 5549--- 1209--- R8

Working Areas
360

Boom

See Note
Blocked Over Front

Center Of
Longitudinal Rotation
Of Crawler

See
Idler Sprocket Note

Drive Sprocket

Note: These Lines Determine The Limiting Position Of Any Load For Operation Within Working Areas Indicated.

TCC--- 750 Link-Belt Cranes

 5549--- 1209--- R8
11

Boom Extend Modes

A--max Mode Boom
Only inner mid section telescopes. Length
38.6 (11.8m)

45 (13.7m)

55 (16.8m)

64.2 (19.6m)
Inner Mid Section Base Section

Boom
Standard Mode Length
Inner mid, outer mid, and tip sections 38.6 (11.8m)
telescope simultaneously.

45 (13.7m)

55 (16.8m)

65 (19.8m)

75 (22.9m)

85 (25.9m)

95 (29.0m)

105 (32.0m)

115.6 (35.2m)
Tip Section Outer Mid Section Inner Mid Section Base Section

Link-Belt Cranes TCC--- 750

12 5549--- 1209--- R8

Attachments

Offset
Fly

Main Main
Boom Boom

38.6-- 115.6 ft (11.8---35.2m) 38.6-- 115.6 ft (11.8---35.2m) Main Boom

Main Boom With 35-- 58 ft (10.7---17.7m) Offset Fly

TCC--- 750 Link-Belt Cranes

 5549--- 1209--- R8
13

Main Boom Working Range Diagrams

A---max Mode --- Extended Gauge
80

78
70 64.2

70
60

Main Boom Length (Feet)

55

50
60
Height Of Boom Head Above Ground (Feet)

45
40

50
38.6

30

40

20
30

10
20

10
0

60 55 50 45 40 35 30 25 20 15 10
Operating Radius From Centerline Of Rotation (Feet) CL Of Rotation

Link-Belt Cranes TCC--- 750

14 5549--- 1209--- R8

Standard Mode --- Extended Gauge

130
78.5
115.6
70
120

105
60
110

95
100 50

Main Boom Length (Feet)

85
90

40
Height Of Boom Head Above Ground (Feet)

75
80

65
70 30

55
60

45
50 20
38.6

40

30
10

20

10 0

110 105 100 95 90 85 80 75 70 65 60 55 50 45 40 35 30 25 20 15 10

12
CL Of Rotation
Operating Radius From Centerline Of Rotation (Feet)

TCC--- 750 Link-Belt Cranes

 5549--- 1209--- R8
15

Main Boom + Fly Working Range

Diagrams
Standard Mode --- Extended Gauge 80
45 Offset
30 Offset
15 Offset
2 Offset 115.6+58
180 70
79.5 45 Offset
30 Offset
170 15 Offset
60 2 Offset

160 115.6+35

150
50

140

130
Height Of Boom Head Above Ground (Feet)

40 115.6
120
105
110

Main Boom Length (Feet)

95
100 30
85
90
75
80
65
70 20

55
60
45
50
38.6

40 10

30

20

10 0

165 155 145 135 125 115 105 95 85 75 65 55 45 35 25 15 10

160 150 140 130 120 110 100 90 80 70 60 50 40 30 20 12 C
Operating Radius From Centerline Of Rotation (Feet) L Of Rotation

Link-Belt Cranes TCC--- 750

16 5549--- 1209--- R8

Main Boom Load Charts

Main Boom Lift Capacity Chart --- 360_ Rotation --- Side Frames Extended Position
ABC+A [45,000 lb (20 412kg)] Counterweight
[All capacities are listed in kips (mt)]

Boom Length ft (m)

Load Load
Radius 38.6 45 55 64.2 75 85 95 105 115.6 Radius
ft (m) (11.8) (13.7) (16.8) (19.8) (22.9) (25.9) (29.0) (32.0) (35.2) ft (m)

10 150.3 106.2 104.1 74.8 10

(3.1) (68.2) (48.2) (47.2) (33.9) (3.1)
12 136.6 106.2 104.1 74.8 12
(3.7) (62.0) (48.2) (47.2) (33.9) (3.7)
15 112.9 106.2 104.1 74.8 52.0 15
(4.6) (51.2) (48.2) (47.2) (33.9) (23.6) (4.6)
20 78.9 78.2 77.4 74.8 52.0 52.0 52.0 20
(6.1) (35.8) (35.5) (35.1) (33.9) (23.6) (23.6) (23.6) (6.1)
25 53.9 53.5 52.9 52.4 52.0 52.0 52.0 51.5 40.0 25
(7.6) (24.4) (24.3) (24.0) (23.8) (23.6) (23.6) (23.6) (23.4) (18.1) (7.6)
30 39.9 40.6 41.2 41.5 41.7 41.8 41.9 42.0 40.0 30
(9.1) (18.1) (18.4) (18.7) (18.8) (18.9) (18.9) (19.0) (19.1) (18.1) (9.1)
35 31.6 32.2 32.6 32.7 32.9 32.9 33.0 33.1 35
(10.7) (14.3) (14.6) (14.8) (14.8) (14.9) (14.9) (15.0) (15.0) (10.7)
40 26.0 26.4 26.6 26.7 26.8 26.9 27.0 40
(12.2) (11.8) (12.0) (12.1) (12.1) (12.2) (12.2) (12.3) (12.2)
45 21.4 21.8 22.1 22.2 22.3 22.3 22.4 45
(13.7) (9.7) (9.9) (10.0) (10.1) (10.1) (10.1) (10.2) (13.7)
50 18.3 18.5 18.7 18.8 18.9 18.9 50
(15.2) (8.3) (8.4) (8.5) (8.5) (8.6) (8.6) (15.2)
55 15.5 15.7 15.9 16.0 16.1 16.1 55
(16.8) (7.0) (7.1) (7.2) (7.3) (7.3) (7.3) (16.8)
60 13.5 13.7 13.9 14.0 14.0 60
(18.3) (6.1) (6.2) (6.3) (6.4) (6.4) (18.3)
65 11.6 11.8 12.0 12.1 12.2 65
(19.8) (5.3) (5.4) (5.4) (5.5) (5.5) (19.8)
70 10.3 10.4 10.5 10.6 70
(21.3) (4.7) (4.7) (4.8) (4.8) (21.3)
75 8.9 9.1 9.2 9.3 75
(22.9) (4.0) (4.1) (4.2) (4.2) (22.9)
80 7.9 8.0 8.1 80
(24.4) (3.6) (3.6) (3.7) (24.4)
85 6.9 7.0 7.1 85
(25.9) (3.1) (3.2) (3.2) (25.9)
90 6.1 6.2 90
(27.4) (2.8) (2.8) (27.4)
95 5.4 5.4 95
(29.0) (2.5) (2.5) (29.0)
100 4.7 100
(30.5) (2.1) (30.5)
105 4.1 105
(32.0) (1.9) (32.0)

This material is supplied for reference use only. Operator must refer to in--- cab Crane Rating Manual and Operators Manual to determine allowable
crane lifting capacities and assembly and operating procedures.

TCC--- 750 Link-Belt Cranes

5549--- 1209--- R8
17

Main Boom Lift Capacity Chart --- 360_ Rotation --- Side Frames Intermediate Position
ABC+A [45,000 lb (20 412kg)] Counterweight
[All capacities are listed in kips (mt)]

Boom Length ft (m)

Load Load
Radius 38.6 45 55 65 75 85 95 105 115.6 Radius
ft (m) (11.8) (13.7) (16.8) (19.8) (22.9) (25.9) (29.0) (32.0) (35.2) ft (m)

10 150.0 106.2 10
(3.1) (68.0) (48.2) (3.1)
12 136.6 106.2 104.1 12
(3.7) (62.0) (48.2) (47.2) (3.7)
15 109.4 106.2 104.1 74.8 15
(4.6) (49.6) (48.2) (47.2) (33.9) (4.6)
20 66.3 65.7 65.0 64.5 52.0 52.0 20
(6.1) (30.1) (29.8) (29.5) (29.3) (23.6) (23.6) (6.1)
25 46.1 46.7 47.2 47.5 47.7 47.8 47.9 25
(7.6) (20.9) (21.2) (21.4) (21.5) (21.6) (21.7) (21.7) (7.6)
30 34.3 34.9 35.6 35.9 36.1 36.2 36.3 36.3 30
(9.1) (15.6) (15.8) (16.1) (16.3) (16.4) (16.4) (16.5) (16.5) (9.1)
35 27.3 37.9 28.3 28.5 28.6 28.7 28.8 28.9 35
(10.7) (12.4) (17.2) (12.8) (12.9) (13.0) (13.0) (13.1) (13.1) (10.7)
40 22.5 22.9 23.1 23.3 23.4 23.4 23.5 40
(12.2) (10.2) (10.4) (10.5) (10.6) (10.6) (10.6) (10.7) (12.2)
45 18.4 18.8 19.1 19.3 19.4 19.4 19.5 45
(13.7) (8.3) (8.5) (8.7) (8.8) (8.8) (8.8) (8.8) (13.7)
50 15.7 16.0 16.2 16.3 16.4 16.4 50
(15.2) (7.1) (7.3) (7.3) (7.4) (7.4) (7.4) (15.2)
55 13.3 13.6 13.8 13.9 14.0 14.1 55
(16.8) (6.0) (6.2) (6.3) (6.3) (6.4) (6.4) (16.8)
60 11.6 11.8 11.9 12.0 12.1 60
(18.3) (5.3) (5.4) (5.4) (5.4) (5.5) (18.3)
65 9.9 10.1 10.2 10.3 10.4 65
(19.8) (4.5) (4.6) (4.6) (4.7) (4.7) (19.8)
70 8.7 8.8 8.9 9.0 70
(21.3) (3.9) (4.0) (4.0) (4.1) (21.3)
75 7.5 7.6 7.7 7.8 75
(22.9) (3.4) (3.4) (3.5) (3.5) (22.9)
80 6.6 6.7 6.8 80
(24.4) (3.0) (3.0) (3.1) (24.4)
85 5.7 5.8 5.9 85
(25.9) (2.6) (2.6) (2.7) (25.9)
90 5.0 5.1 90
(27.4) (2.3) (2.3) (27.4)
95 4.3 4.4 95
(29.0) (2.0) (2.0) (29.0)
100 3.7 100
(30.5) (1.7) (30.5)
105 3.2 105
(32.0) (1.5) (32.0)

This material is supplied for reference use only. Operator must refer to in--- cab Crane Rating Manual and Operators Manual to determine allowable
crane lifting capacities and assembly and operating procedures.

Link-Belt Cranes TCC--- 750

18 5549--- 1209--- R8

Main Boom Lift Capacity Chart --- 360_ Rotation --- Side Frames Retracted Position
AB+A [33,500 lb (15 195kg)] Counterweight
[All capacities are listed in kips (mt)]

Boom Length ft (m)

Load Load
Radius 38.6 45 55 65 75 85 95 105 115.6 Radius
ft (m) (11.8) (13.7) (16.8) (19.8) (22.9) (25.9) (29.0) (32.0) (35.2) ft (m)

12 88.2 12
(3.7) (40.0) (3.7)
15 60.5 52.0 15
(4.6) (27.4) (23.6) (4.6)
20 37.9 38.5 39.0 20
(6.1) (17.2) (17.5) (17.7) (6.1)
25 26.3 26.9 27.6 27.9 25
(7.6) (11.9) (12.2) (12.5) (12.7) (7.6)
30 19.2 19.8 20.4 20.8 21.0 21.2 30
(9.1) (8.7) (9.0) (9.3) (9.4) (9.5) (9.6) (9.1)
35 15.1 15.7 16.0 16.3 16.4 16.5 35
(10.7) (6.8) (7.1) (7.3) (7.4) (7.4) (7.5) (10.7)
40 12.3 12.7 12.9 13.1 13.2 13.3 40
(12.2) (5.6) (5.8) (5.9) (5.9) (6.0) (6.0) (12.2)
45 9.7 10.1 10.3 10.5 10.7 10.8 10.8 45
(13.7) (4.4) (4.6) (4.7) (4.8) (4.9) (4.9) (4.9) (13.7)
50 8.0 8.3 8.5 8.7 8.8 8.8 50
(15.2) (3.6) (3.8) (3.9) (3.9) (4.0) (4.0) (15.2)
55 6.4 6.7 6.9 7.0 7.1 7.2 55
(16.8) (2.9) (3.0) (3.1) (3.2) (3.2) (3.3) (16.8)
60 5.3 5.5 5.7 5.8 5.9 60
(18.3) (2.4) (2.5) (2.6) (2.6) (2.7) (18.3)
65 4.2 4.4 4.6 4.7 4.8 65
(19.8) (1.9) (2.0) (2.1) (2.1) (2.2) (19.8)
70 3.5 3.6 3.7 3.8 70
(21.3) (1.6) (1.6) (1.7) (1.7) (21.3)
75 2.7 2.8 2.9 3.0 75
(22.9) (1.2) (1.3) (1.3) (1.4) (22.9)
80 2.1 2.2 2.3 80
(24.4) (1.0) (1.0) (1.0) (24.4)
85 1.5 1.6 1.7 85
(25.9) (0.7) (0.7) (0.8) (25.9)
90 1.1 1.2 90
(27.4) (0.5) (0.5) (27.4)

This material is supplied for reference use only. Operator must refer to in--- cab Crane Rating Manual and Operators Manual to determine allowable
crane lifting capacities and assembly and operating procedures.

TCC--- 750 Link-Belt Cranes

5549--- 1209--- R8
19

Main Boom + Fly Load Charts

115.6 ft Main Boom + Fly --- 360_ Rotation --- Standard Mode --- Side Frames Extended Position
ABC+A [45,000 lb (20 412kg)] Counterweight
[All capacities are listed in kips (mt)]

2 Offset Fly 15 Offset Fly 30 Offset Fly 45 Offset Fly

Load Load Load Load
Radius Fly Length --- ft (m) Radius Fly Length --- ft (m) Radius Fly Length --- ft (m) Radius Fly Length --- ft (m)
ft (m) ft (m) ft (m) ft (m)
35 (10.7) 58 (17.7) 35 (10.7) 58 (17.7) 35 (10.7) 58 (17.7) 35 (10.7) 58 (17.7)
30 20.5 30 30 30
(9.1) (9.3) (9.1) (9.1) (9.1)
35 19.4 12.0 35 35 35
(10.7) (8.8) (5.4) (10.7) (10.7) (10.7)
40 18.4 11.5 40 13.9 40 40
(12.2) (8.3) (5.2) (12.2) (6.3) (12.2) (12.2)
45 17.4 10.9 45 13.4 45 11.2 45
(13.7) (7.9) (4.9) (13.7) (6.0) (13.7) (5.0) (13.7)
50 16.5 10.4 50 12.9 8.4 50 10.9 50
(15.2) (7.5) (4.7) (15.2) (5.8) (3.8) (15.2) (4.9) (15.2)
55 14.8 9.9 55 12.4 8.1 55 10.6 55 9.4
(16.8) (6.7) (4.4) (16.8) (5.6) (3.6) (16.8) (4.8) (16.8) (4.2)
60 14.2 9.5 60 12.0 7.7 60 10.3 60 9.3
(18.3) (6.4) (4.3) (18.3) (5.4) (3.4) (18.3) (4.6) (18.3) (4.2)
65 13.1 9.0 65 11.6 7.4 65 10.1 6.2 65 9.1
(19.8) (5.9) (4.0) (19.8) (5.2) (3.3) (19.8) (4.5) (2.8) (19.8) (4.1)
70 11.5 8.6 70 11.2 7.2 70 9.8 6.0 70 9.0
(21.3) (5.2) (3.9) (21.3) (5.0) (3.2) (21.3) (4.4) (2.7) (21.3) (4.0)
75 10.2 8.2 75 10.8 6.9 75 9.6 5.8 75 8.9 5.2
(22.9) (4.6) (3.7) (22.9) (4.8) (3.1) (22.9) (4.3) (2.6) (22.9) (4.0) (2.3)
80 9.0 7.9 80 9.6 6.7 80 9.4 5.7 80 8.8 5.1
(24.4) (4.0) (3.5) (24.4) (4.3) (3.0) (24.4) (4.2) (2.5) (24.4) (3.9) (2.3)
85 8.0 7.6 85 8.5 6.4 85 9.0 5.6 85 8.8 5.0
(25.9) (3.6) (3.4) (25.9) (3.8) (2.9) (25.9) (4.0) (2.5) (25.9) (3.9) (2.2)
90 7.1 7.2 90 7.6 6.2 90 8.0 5.4 90 8.3 4.9
(27.4) (3.2) (3.2) (27.4) (3.4) (2.8) (27.4) (3.6) (2.4) (27.4) (3.7) (2.2)
95 6.3 6.9 95 6.7 6.0 95 7.1 5.3 95 7.4 4.9
(29.0) (2.8) (3.1) (29.0) (3.0) (2.7) (29.0) (3.2) (2.4) (29.0) (3.3) (2.2)
100 5.6 6.2 100 6.0 5.9 100 6.3 5.2 100 6.5 4.8
(30.5) (2.5) (2.8) (30.5) (2.7) (2.6) (30.5) (2.8) (2.3) (30.5) (2.9) (2.1)
105 5.0 5.5 105 5.3 5.7 105 5.6 5.1 105 5.8 4.8
(32.0) (2.2) (2.4) (32.0) (2.4) (2.5) (32.0) (2.5) (2.3) (32.0) (2.6) (2.1)
110 4.5 5.0 110 4.7 5.5 110 5.0 5.0 110 5.1 4.7
(33.5) (2.0) (2.2) (33.5) (2.1) (2.4) (33.5) (2.2) (2.2) (33.5) (2.3) (2.1)
115 3.9 4.4 115 4.2 4.9 115 4.4 4.9 115 4.5 4.7
(35.1) (1.7) (1.9) (35.1) (1.9) (2.2) (35.1) (1.9) (2.2) (35.1) (2.0) (2.1)
120 3.5 4.0 120 3.7 4.4 120 3.9 4.8 120 4.7
(36.6) (1.5) (1.8) (36.6) (1.6) (1.9) (36.6) (1.7) (2.1) (36.6) (2.1)
125 3.1 3.5 125 3.2 3.9 125 3.4 4.3 125 4.5
(38.1) (1.4) (1.5) (38.1) (1.4) (1.7) (38.1) (1.5) (1.9) (38.1) (2.0)
130 2.7 3.1 130 2.8 3.5 130 2.9 3.8 130 4.0
(39.6) (1.2) (1.4) (39.6) (1.2) (1.5) (39.6) (1.3) (1.7) (39.6) (1.8)
135 2.3 2.8 135 2.4 3.1 135 3.4 135 3.5
(41.1) (1.0) (1.3) (41.1) (1.0) (1.4) (41.1) (1.5) (41.1) (1.5)
140 2.0 2.4 140 2.1 2.7 140 2.9 140 3.0
(42.7) (0.9) (1.1) (42.7) (0.9) (1.2) (42.7) (1.3) (42.7) (1.3)
145 2.1 145 2.4 145 2.6 145
(44.2) (0.9) (44.2) (1.0) (44.2) (1.1) (44.2)
150 1.8 150 2.0 150 2.2 150
(45.7) (0.8) (45.7) (0.9) (45.7) (0.9) (45.7)
155 1.6 155 1.7 155 1.8 155
(47.2) (0.7) (47.2) (0.7) (47.2) (0.8) (47.2)
160 1.3 160 1.5 160 160
(48.8) (0.5) (48.8) (0.6) (48.8) (48.8)

This material is supplied for reference use only. Operator must refer to in--- cab Crane Rating Manual and Operators Manual to determine allowable
crane lifting capacities and assembly and operating procedures.

Link-Belt Cranes TCC--- 750

5549--- 1209--- R8

Link-Belt Construction Equipment Company Lexington, Kentucky www.linkbelt.com

RLink-Belt is a registered trademark. Copyright 2009. We are constantly improving our products and therefore reserve the right to change designs and specifications.

TCC--- 750 Link-Belt Cranes