MA1110-EA

Operation Guide 3294

ENGLISH
Congratulations upon your selection of this CASIO watch.

E-1

About This Manual Contents

x Depending on the model of your watch, display text E-2 About This Manual
appears either as dark gures on a light background or
light gures on a dark background. All sample displays E-6 General Guide
in this manual are shown using dark gures on a light E-8 Timekeeping
background. E-8 To set the time and date
x Note that the product illustrations in this manual are
intended for reference only, and so the actual product E-11 Backlight
may appear somewhat different than depicted by an E-11 To switch the backlight function on and off
illustration. E-13 Alarm
x Button operations are indicated using the letters shown
E-15 To set the alarm time
in the illustration.
xEach
 section of this manual provides you with the E-16 To stop the alarm
information you need to perform operations in each E-17 To switch an alarm and Hourly Time Signal on and off
mode. Further details and technical information can be
found in the Reference section.

E-2 E-3

E-18 Countdown Timer

E-19 To set the countdown start time
E-20 To use the countdown timer
E-21 To turn auto-repeat on and off
E-22 Stopwatch
E-23 To measure times with the stopwatch
E-24 Reference
E-25 Specifications

E-4 E-5

General Guide x After you perform an operation in any mode, pressing C returns to the
Timekeeping Mode.
x Press C to change from mode to mode. x Press B in any mode to illuminate the display for about two seconds.

Timekeeping Mode Alarm Mode Countdown Timer Mode Stopwatch Mode

C C C

C
E-6 E-7

Timekeeping 3. When the setting you want to change is ashing, press D to change it as
described below.
Use the Timekeeping Mode to set and view the current To change this setting Perform this button operation
Day of week time and date.
Month Seconds Press D to reset to 00.
Day To set the time and date Hour, Minutes, Year, Month, Day Press D to increase the setting.
1. In the Timekeeping Mode, press A. The seconds digits
will start to ash, which indicates the setting screen. x Pressing D while the seconds are in the range of 30 to 59 resets them to 00 and
adds 1 to the minutes. In the range of 00 to 29, the minutes are unchanged.
2. Press C to move the ashing in the sequence shown
x To toggle between the 12-hour and 24-hour formats, press B while some
below to select other settings.
digits are flashing.
C C 4. Press A to exit the setting screen.
Seconds Hour Minutes
Hour Seconds xThe
 day of the week is automatically displayed in accordance with the date
C C (year, month, and day) settings.
Minutes 
xThe year can be set in the range of 2000 to 2099.
Day Month Year
PM indicator C C

E-8 E-9
 Operation Guide 3294
xThe
 watchs built-in full automatic calendar automatically makes allowances for Backlight
different month lengths and leap years. Once you set the date, there should be
no reason to change it except after you have the watchs battery replaced. When you switch the backlight function on, the backlight of the watch flashes
x With the 12-hour format, the PM indicator appears for times in the range of noon whenever Alarm, Hourly Time Signal or Countdown Timer is sounding.
to 11:59 p.m. and no indicator appears for times in the range of midnight to xPressing B at any time illuminates the display, regardless of the backlights
11:59 a.m. on/off setting.
x With the 24-hour format, times are displayed in the range of 0:00 to 23:59, with
the 24H indicator. To switch the backlight function on and off
x The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is In the Timekeeping Mode, hold down D for about two
applied in all other modes. seconds to switch the backlight function on and off. When
you switch the backlight function on, an indicator appears
on the display as shown.

xThe backlight function on indicator remains on the
display in all modes until you switch the backlight
function off.
Backlight function on 
xThe above operation controls operation of the backlight
indicator function only. It does not affect operation of audible
tones and signals.
E-10 E-11

Backlight Precautions Alarm

The backlight uses an LED (light-emitting diode) and a light guide panel that cause
the entire display to glow for easy reading in the dark. The multi-function alarm lets you specify the hour,
Alarm on indicator
In any mode, press B to illuminate the display for about two seconds. minutes, month, and day for the alarm (page E-14). When

xThe illumination provided by the backlight may be hard to see when viewed under Mode indicator the alarm is on, the alarm sounds for 20 seconds at the
direct sunlight. Month preset time. When the Hourly Time Signal is on, the

xThe backlight automatically stops illuminating whenever an alarm sounds. watch beeps every hour on the hour.
Day
xFrequent
 use of the backlight shortens the battery life. x The alarm and the Hourly Time Signal sound in all
modes.
x An alarm setting (and an Hourly Time Signal setting)
is available in the Alarm Mode, which you enter by
pressing C (page E-6).

Hour
Minutes
Hourly Time Signal
on indicator
E-12 E-13

Alarm Types To set the alarm time

The alarm type is determined by the settings you make, as described below. 1. In the Alarm Mode, press A. The hour digits of the alarm time will start to flash,
which indicates the setting screen.
x Daily alarm xThis operation automatically turns on the alarm.
Set the hour and minutes for the alarm time. This type of setting causes the alarm to
sound everyday at the time you set. 2. Press C to move the flashing in the sequence shown below to select other
settings.
x Date alarm
Set the month, day, hour and minutes for the alarm time. This type of setting causes C C C
the alarm to sound at the specific time, on the specific date you set. Hour Minutes Month Day
x 1-Month alarm
Set the month, hour and minutes for the alarm time. This type of setting causes the C
alarm to sound everyday at the time you set, only during the month you set.
x Monthly alarm 3. While a setting is flashing, press D to increase it.
Set the day, hour and minutes for the alarm time. This type of setting causes the x To set an alarm that does not include a month (Daily alarm, Monthly alarm), set
alarm to sound every month at the time you set, on the day you set. for the month. Press D until the mark appears (between and ) while
month setting is ashing.

E-14 E-15

x To set an alarm that does not include a day (Daily alarm, 1-Month alarm), set To switch an alarm and Hourly Time Signal on and off
for the day. Press D until the mark appears (between the end of the month Press D while in the Alarm Mode to change the status of
and ) while the day setting is ashing. Alarm on indicator
an alarm and Hourly Time Signal in the sequence shown
x When setting the alarm time using the 12-hour format, take care to set the time below.
correctly as a.m. or p.m. (PM indicator).
D
4. Press A to exit the setting screen. Both off Alarm only

To stop the alarm D D

Press any button to stop the alarm after it starts to sound. Both on Hourly Time Signal only
D
Hourly Time Signal
on indicator
xThe
 alarm on indicator and the Hourly Time Signal on
indicator are shown on the display in all modes while
these functions are turned on.

E-16 E-17

Countdown Timer To set the countdown start time

1. In the Countdown Timer Mode, press A. The hours digits of the countdown start
Current time The countdown timer can be set within a range of 1 second time will start to flash, which indicates the setting screen.
to 24 hours. When the countdown reaches zero, an alarm
Mode indicator 2. Press C to move the flashing in the sequence shown below to select other
sounds for 10 seconds or until you press any button.
settings.
x You can also select auto-repeat, which automatically
C C
restarts the countdown from the original value you set
Hours Minutes Seconds
whenever zero is reached.
x Countdown timer functions are available in the
Countdown Timer Mode, which you enter by pressing C
C (page E-7).
Hours 3. While a setting is flashing, press D to increase it.
Seconds x To set the starting value of the countdown time to 24 hours, set 0:00' 00.
Minutes
4. Press A to exit the setting screen.

E-18 E-19
 Operation Guide 3294
To use the countdown timer To turn auto-repeat on and off
Press D while in the Countdown Timer Mode to start the countdown timer. 1. In the Countdown Timer Mode, press A. The hours
x When the end of the countdown is reached and auto-repeat is turned off, the alarm digits of the countdown start time will start to flash, which
sounds for 10 seconds or until you stop it by pressing any button. The countdown indicates the setting screen.
time is automatically reset to its starting value after the alarm stops.
2. Press B to toggle auto-repeat on (AUTO displayed)
x Press D while a countdown operation is in progress to pause it. Press D again to
and off (AUTO not displayed).
resume the countdown.
x Note that pressing B in the above operation also
x To completely stop a countdown operation, rst pause it (by pressing D), and then
turns on the illumination.
press A. This returns the countdown time to its starting value. Auto-repeat on indicator x When the end of the countdown is reached while auto-
repeat is on, the alarm sounds, but the countdown
restarts from the beginning without stopping. You can
stop the countdown by pressing D and manually
reset to the start time by pressing A.
x The auto-repeat indicator appears in the Countdown
Timer Mode only.

E-20 E-21

Stopwatch To measure times with the stopwatch

Elapsed time
The stopwatch lets you measure elapsed time, split times,
Current time
and two finishes. The range of the stopwatch is 23 hours, D D D D A
Mode indicator 59 minutes, 59 seconds. Start Stop Re-start Stop Clear
 the rst 60 minutes, the display shows minutes,
xFor
seconds, and 1/100 second. After 60 minutes, the Split time
display format changes to show hours, minutes, and D A A D A
seconds. Start Split Split release Stop Clear
 of the operations in this section are performed in
xAll (SPL displayed)
the Stopwatch Mode, which you enter by pressing C
Two Finishes
(page E-7).
Minutes D A D A A
Seconds Start Split Stop Split release Clear
1/100 second First runner Second runner Display time of
nishes. nishes. second runner.
Display time of rst
runner.
E-22 E-23

Reference Specifications
This section contains more detailed and technical information about watch operation. Accuracy at normal temperature: 30 seconds a month
It also contains important precautions and notes about the various features and
Timekeeping: Hour, minutes, seconds, pm (PM), month, day, the day of the week
functions of this watch.
Time system: Switchable between 12-hour and 24-hour formats
Calendar system: Full Auto-calendar pre-programmed from the year 2000 to 2099
Auto return features
Alarm: Multi-function* alarm; Hourly Time Signal
If you leave a screen with flashing digits for two or three minutes without performing
*Alarm type: Daily alarm, date alarm, 1-month alarm, monthly alarm
any operation, the watch automatically saves any settings you have made up to that
point and exits the setting screen. Countdown Timer
Measuring unit: 1 second
Data and Setting Scrolling Input range: 1 second to 24 hours
The D button is used to scroll through setting screen data on the display. Holding Other: Auto-repeat function
down this button during a scroll operation scrolls through the data at high speed. Stopwatch
Measuring units: 1/100 second (for the first 60 minutes)
1 second (after 60 minutes)
Measuring capacity: 23:59'59"
Measuring modes: Elapsed time, split time and two finishes

E-24 E-25

Other: Backlight (light-emitting diode)

Battery: One lithium battery (Type: CR2016)
Approximately 3 years on type CR2016 (Assuming 3.5 seconds light
operation and 20 seconds alarm operation per day)
Frequent use of the backlight shortens the battery life noted above.

E-26