Onkyo TX Nr636
Onkyo TX Nr636
Onkyo TX Nr636
Basic Manual
http://www.onkyo.com/manual/txnr636/adv/en.html
En
See more at http://safe-manuals.com
Before Start
About the Basic Manual Features Supplied Accessories
The Basic Manual leads you through the fundamental steps The unit is designed to be connected in between the TV and
to enjoy the AV Receiver from connections to TV, speaker the playback components such as Blu-ray disc player. Video Indoor FM antenna --- (1)
system and playback components, to necessary functions signal from the playback devices will be sent through the unit
for playback. As well as that, Basic Manual informs you with to the TV and audio will be reproduced with the speakers
the instructions on frequently used functions. Besides, there creating Dolby Digital or other kind of surround sound field. AM loop antenna --- (1)
is another part of the manual called Advanced Manual to The unit has many in/out jacks on its rear panel which allows
inform you with more detailed information, which we have you to connect a lot of playback devices simultaneously.
decided to publish on the web from the ecological point of • Equipped with 7 channel amplifier Color labels for speaker cable --- (1)
view. • Incorporates Qdeo™ technology for HDMI video
Speaker Cable
upscaling (to 4K compatible)
3
• Equipped with 4K/60 Hz Passthrough-compatible HDMI Remote controller (RC-880M) --- (1)
Advanced Manual IN/OUT jacks (IN1 to IN4 of HDMI IN jacks are 4K Batteries (AA/R6) --- (2)
Advanced Manual is always updated with the latest compatible)
information and its user friendly interface, which does not • Supports the HDMI Through function which allows Power cord (Taiwanese model) --- (1)
matter whether you access from PC or Smartphone, helps transmission from playback devices to the TV in standby state
you to understand more deeply about the AV Receiver. • Supports HDCP2.2, a strict copy-protection for providing
Advanced Manual is consisted of the following chapters. high quality content Speaker setup microphone --- (1)
• Details on AM/FM playback • Supports ARC (Audio Return Channel)
• Playing Music Files on a USB Storage Device • Supports USB storage playback ¼¼The number in parenthesis indicates the quantity. On packaging, the
• Listening to Internet Radio • Supports variety of network functions such as Internet letter at the end of the product name indicates the color.
• Playing Music with DLNA Radio, DLNA, etc.
• Playing Music Files in a Shared Folder • Supports Wi-Fi, Bluetooth and MHL-enabled mobile
• Operating Music Files with the Remote Controller device
How to use the remote controller
• Listening Mode • Bi-Amping capability
• Advanced Settings • A/V Sync Control Function to correct deviation of audio and
• Operating Other Components with the Remote Controller video
• Connecting and Operating Onkyo RI Components • Zone2 function which allows you to play a different
• Firmware Update source in another room from the main room Remote control sensor
• Details on Troubleshooting • 32 bit DSP (Digital Signal Processor) with excellent AV Receiver
• Reference Information calculation performance Batteries (AA/R6)
• Music Optimizer™ for Compressed Digital Music files
• Phase Matching Bass System
• Automatic speaker setup available using supplied Approx.
calibrated microphone (AccuEQ Room Calibration) 16 ft. (5 m)
Advanced Manual found here
http://www.onkyo.com/manual/txnr636/adv/en.html • Supports playback of MP3, WMA, WMA Lossless, FLAC,
WAV, Ogg Vorbis, Apple Lossless, DSD, Dolby TrueHD ¼¼If you do not use the remote controller for a long time, remove the batteries
to prevent leakage.
via network and USB storage device ¼¼Note that keeping consumed batteries inside may cause corrosion resulting
in damage of the remote controller.
2
See more at http://safe-manuals.com
Step 1: Connections
TV
Personal computer
HDMI
IN
HDMI
OUT
HDMI
OUT
HDMI HDMI
HDMI OUT OUT Blu-ray Disc/
OUT DVD player
TV
AUDIO
Important: The power cord must be connected only after all To connect the TV and the unit, connect the HDMI OUT DIGITAL
OPTICAL
OUT
other connections are completed. MAIN jack of the unit and the HDMI IN jack of the TV OUT
3
See more at http://safe-manuals.com
Step 1: Connections
the section 2 "2nd Step : Source Connection" of "Step 2: 3 Connection with turntable: If it uses an MM type
Setting Up". cartridge and does not have a built-in audio equalizer, Video signals input to the composite video input
• To enjoy HDCP2.2 protected video, connect the player to connect it to the 3 PHONO jack. If the connected jack or the COMPONENT VIDEO input jacks will be
the IN3 jack and the TV to the HDMI OUT MAIN jack of turntable has a built-in audio equalizer, connect it to the upconverted to HDMI signals and then output from
the HDMI output jack.
the unit. Your player and TV need to support HDCP2.2. 2 TV/CD jack.
• To play 4K or 1080p video, use the high speed HDMI cable. ¼¼If it uses an MC type cartridge, install an audio equalizer compatible
with MC type cartridge between the unit and the turntable by
• Another TV can be connected to the HDMI OUT SUB jack. connecting it to the 2 TV/CD jack. For details, refer to the turntable's
To use the function to display the unit's setting screen on instruction manual.
the TV, connect the TV to the HDMI OUT MAIN jack. ¼¼If the turntable has a ground wire, connect it to the GND terminal of this
• It is possible to send video and audio of an MHL-enabled unit. If connecting the ground wire increases noise, disconnect it.
mobile device by connecting the MHL-enabled mobile device
to the AUX INPUT HDMI/MHL jacks on the front panel. Video signal connection
The unit has a video upconversion function. For details, see
the section on the right.
Connecting Components without HDMI
4 Use a component video cable to connect a TV
If your AV component does not have HDMI jack, use an with component video input jacks and a player with
available jack of your component for cable connection with component video output jacks.
AV Receiver
this unit. Just as the HDMI jacks, other jacks on this unit
have a preassigned input selector button on the front panel. ¼¼When the video signals input to the COMPONENT VIDEO
Component video cable jacks are upconverted and output from the HDMI output
See the name of the input selector button shown with the ¼¼Its transmitted video has higher quality than that of
jack, their resolution will be fixed to 480i. Set the output
composite video cable.
jack when connecting the device. resolution of the player to 480i/576i. If the input has 480p
or higher resolution, a message prompting you to change
5 Use a composite video cable to connect a TV with the resolution setting will appear. If your player does not
Audio signal connection support 480i/576i output, use the composite video jack.
composite video input jack or a player with composite ¼¼If multiple video signal inputs are put into one input
1 Digital connection: Use a digital optical cable video output jack. system, the output will be made in the order of HDMI,
(OPTICAL) or digital coaxial cable (COAXIAL) for component video, and composite video. Note that it is not
connection. Composite video cable possible to convert digital audio input signals to analog or
vice versa.
Digital optical cable (OPTICAL) 1 4 5
¼¼As the digital in optical jack of the unit has a cover,
push in the cable against the cover as it is turned
inside.
3 2
4
See more at http://safe-manuals.com
Step 1: Connections
2 Connecting speakers
2
Front R
1
Front L
3
Important: The power cord must be connected only after all Center
other connections are completed.
12 3 9F 6
45
78
1 2 Front speakers
3 Center speaker
4 5 Surround speakers
6 Subwoofer
7 8 Surround back speakers
9 F Height speakers
• 5.1 ch: 1 2 3 4 5 6 If there is only one
• 7.1 ch: 1 2 3 4 5 6 + 7 8 or 1 2 3 4 5 6 + surround back
speaker, connect
9F it to the BACK or
• 2 ch: 1 2, 3 ch: 1 2 3, 4 ch: 1 2 4 5 HEIGHT L terminal.
• Up to two subwoofers can be connected.
• When using the Zone function, refer to the section 6
6 6 5 8F 79 4
"Using the ZONE function" of "Step 3: Playing Back". Subwoofer with built- Subwoofer with built- Surround R Surround back/ Surround back/ Surround L
in power amplifier in power amplifier height R height L
It is ideal to install the front speakers and center speaker
at the height not too far from that of the screen. As for the
the speakers have 4 Ω or more to less than 6 Ω impedance. You can set
surround speakers, it is recommended to install at the 1/2"-5/8"(12-15 mm)
up by viewing the guidance displayed on the TV screen. Select the item
position slightly backward of the listening position and with the cursor buttons of the remote controller and press ENTER to
higher than the listener's ears, since it is preferable to confirm your selection. To return to the previous screen, press RETURN.
Press RCV and then HOME on the remote controller. Select "Setup" - "2.
obtain a diffused sound rather than a direct sound. As a Speaker Setup" - "Speaker Settings" - "Speaker Impedance" and change
bass sound reproduced by subwoofer is less directional, Important: Connect speakers with 6 Ω to 16 Ω impedance. the default value "6ohms" to "4ohms".
it is possible to place it at any position. Consider the best Using a speaker with less impedance than the supported Cut and remove the plastic coating from the end of the
installation position where a bass sound can be clearly value may result in failure. (Ú) speaker cable, twist the core and connect it to the terminal.
heard by listening to actual playback. ¼¼In the European, Australian and Asian models, it is possible to connect Make correct connection between the unit's jacks and
a speaker with 4 Ω impedance. You have to modify the setting if any of
speaker's jacks (+ to + and - to -) for each channel. If
5
See more at http://safe-manuals.com
Step 1: Connections
connection is wrong, a bass sound may become poor due to
reverse phase. Attaching the supplied colored speaker cable
labels to the + side on the both ends of each channel's cable
3 Other connections
Network connection
NAS
Fix with a tack on
the wall.
6
See more at http://safe-manuals.com
Step 2: Setting Up
Important: When the unit is turned on for the first time, the
setup wizard of the section 2 will automatically be launched.
If you use the setup wizard to make the initial setup,
2 Making the Initial Setup with the Setup
Wizard
1st Step : AccuEQ Room Calibration
The test tone coming from each speaker will be measured to
enable setting of the number of speakers, volume level, each
connect a TV to the HDMI OUT MAIN jack of the unit via speaker's optimum crossover frequencies, and distance from
HDMI connection. the primary listening position, and also enable correction of
distortion caused by the room acoustic environment.
1
Read before starting the procedure: Set up by
answering the guidance displayed on the TV screen.
Select the item with the cursor buttons of the remote Initial Setup
Turning the power on controller and press ENTER to confirm your selection. AccuEQ Room Calibration
To return to the previous screen, press RETURN. This step you can automatically calibrate
• If you terminate the procedure on the way or
Connect the power cord to the outlet. Press zON/
your room to get correct surround sound.
change the setting made in the initial setup and Would you like to cailbrate your room now
STANDBY on the main unit or zRECEIVER on the remote want to call up the setup wizard again, press RCV
or later?
controller to turn the unit on or to standby mode. and then HOME on the remote controller, select
"Setup" - "7.Hardware Setup" - "Initial Setup", and Do it Now
Initial Setup
in this screen and press ENTER on the remote controller. starting the procedure, place the supplied speaker setup
microphone at the measurement position by referring to
HOME Exit
Initial Setup
the figure below.
Welcome to initial setup. Have you connected all the speakers and devices?
Before starting, please connect speakers and sources.
Now, would you like to start initial setup?
1st Step : AccuEQ Room Calibration
2nd Step : Source Connection
3rd Step : Remote Mode Setup
4th Step : Network Connection
¼¼Taiwanese models include a removable power cord. Connect the power
cord to AC INLET of the unit and then connect to the outlet. Always Yes
No
disconnect the outlet side first when disconnecting the power cord. When HOME Exit
the unit is turned on, a large instantaneous current may flow affecting
functionality of the computer and other devices. It is recommended to
use a separate outlet from that for the computer or such other sensitive
devices.
1st Step : AccuEQ Room Calibration
2nd Step : Source Connection
Firmware update notification: If the unit is connected 3rd Step : Remote Mode Setup
via LAN and there is firmware update available, the 4th Step : Network Connection
Listening area Measurement position
"Firmware Update Available" message will appear. To with microphone
execute updating, select "Update Now" with the cursor
buttons of the remote controller and press ENTER. When ¼¼Correct measurement will not be possible if the microphone is held by
"Completed!" appears, press zON/STANDBY on the main hand. Measurement is not possible if headphones are being used.
¼¼The subwoofer sound may not be detected since it is extremely low
unit to turn the unit into standby mode. Then updating will
frequencies. Raise the subwoofer volume to around the half of its
be completed. maximum volume and make its frequency to the maximum level.
¼¼A loud test tone will be heard during measurement. Measurement may
be interrupted if there is ambient noise or radio frequency interference.
Close the window and turn off the home appliance and fluorescent light.
7
See more at http://safe-manuals.com
Step 2: Setting Up
2. After placing the microphone at the measurement 7. When "Please unplug setup microphone." is 6. Select "Yes" with the cursors and press ENTER to
position, select "Do it Now" with the cursors and displayed, disconnect the microphone. enable the CEC link function or select "No" and
press ENTER. press ENTER to keep it disabled.
3. Connect the microphone to the SETUP MIC jack of 2nd Step : Source Connection
the unit. Source Connection
Yes. Continue
the lower left of the screen. After setting the items, press
ENTER on the remote controller. Press ENTER also in 4. Select "Yes" with the cursors and press ENTER Remote Mode Setup
the next screen, on the remote controller to check the connection Preprograming remote will give you control
of other devices from AV receiver remote
of other inputs or select "No, Done Checking" and
5. The test tones sound from the connected speakers
Would you like to setup your remote to
If you select "Yes", you will return to the screen of step 2. connected. You can always come back to remote
Measurement will be made twice for each speaker. It If you select "No, Done Checking", you will proceed to
setup from setup “8-2 Remote Mode Setup”.
the speakers do not produce the test tone, check for 5. Enabling HDMI Linked Operation and Other
disconnection. Functions
In the next screen, you can enable the HDMI linked
6. When the measurement is completed, the operation with CEC compliant device, connection with
measurement result is displayed. ARC compatible TV, and HDMI Through function. Select
Press t/u on the remote controller to check the "Yes" with the cursors to enable them or "No, Done
settings. Press ENTER with "Save" selected. In the next Checking" to skip, and press ENTER on the remote
screen showing that "AccuEQ" is "On", press ENTER on controller.
the remote controller.
• If there is an error message, follow the on-screen
instruction to remove the error cause.
8
See more at http://safe-manuals.com
Step 2: Setting Up
4th Step : Network Connection 2. Select and set the authentication method. 3. Establish connection.
The connection process starts and the Wi-Fi indicator
Initial Setup
Wi-Fi Setup on the left of the unit's display starts flashing. When
Network Connection
Select the authentication method. connection has been established, the Wi-Fi indicator
Do you want to connect network connection?
changes from flashing to staying lit. If the Wi-Fi indicator
It gives you network services that our AV does not stay lit, connection has not been established.
Make the setting again. If "Push Button" does not work,
receiver support. If you wish to skip this step.
select “No. Skip”.
9
See more at http://safe-manuals.com
Step 3: Playing Back
1 Playing the player and TV
1 Remote controller parts name
10
See more at http://safe-manuals.com
Step 3: Playing Back
Listening modes
sound in different modes. The selectable listening modes The Basic Manual explains the method using automatic
the remote controller several times to select the desired
depend on the format of the input signals. tuning. For manual tuning, see the Advanced Manual
brightness.
(http://www.onkyo.com/manual/txnr636/adv/en.html).
MOVIE/TV: You can select a listening mode suitable for Changing the Input Display: Press DISPLAY on the
movies and TV programs. remote controller several times to switch the display of the 1. Press TUNER on the main unit several times to
main unit in order of: select either "AM" or "FM".
MUSIC: You can select a listening mode suitable for music.
2. Press TUNING MODE on the unit, so that the "AUTO"
GAME: You can select a listening mode suitable for games. Input source &
indicator on the display lights.
STEREO: You can select a listening mode for stereo and all
volume 3. Press TUNING on the unit.
channel stereo sources. The automatic tuning to a radio station starts. Searching
stops when one is tuned. When tuned into a radio
PURE AUDIO (main unit only) (European, Australian station, the " TUNED " indicator on the display lights.
and Asian models): The display and analog video circuits Listening mode The "FM STEREO" indicator lights if the radio station is
are cut off to provide purer sound. an FM radio station.
• For details on the listening modes, see the Advanced
Manual (http://www.onkyo.com/manual/txnr636/adv/ TUNED
en.html). Signal format AUTO
11
See more at http://safe-manuals.com
Step 3: Playing Back
4
A2DP profile. services and DLNA.
• Note that connection is not always guaranteed with all • "Network Setup" becomes selectable after the network
Bluetooth-enabled devices. Using the Home menu starts up even if it cannot be selected first. It may take
about a minute to start up.
• When "Network Service" is selected for the first time,
In the Home menu, you can make advanced settings and
Pairing use Internet radio and DLNA.
the "DISCLAIMER" screen will appear on the TV. Select
"Agree" if you agree the content. If you do not agree the
Pairing is necessary when using the Bluetooth-enabled 1. After pressing RCV, press HOME on the remote content, you cannot use the network service.
device for the first time. Before starting the procedure, learn controller. ¼¼You cannot use the function unless the TV is connected via HDMI since
selecting "Agree" in the "DISCLAIMER" screen is not possible.
how to enable the Bluetooth setting function and to connect The Home menu is displayed on the TV screen. You can
also use the HOME button on the main unit. • Layout of the icons in the "Network Service" top menu
with other devices on the Bluetooth-enabled device. can be changed. Press NET on the remote controller
1. Press BLUETOOTH on the remote controller. HOME
and press D. Select the source icon with the cursors and
The unit enters the pairing mode and the BLUETOOTH press ENTER, and then select the destination icon and
indicator starts flashing. press ENTER. The positions of the icons are switched
2. While the BLUETOOTH indicator is flashing, each other.
Setup
complete connection on the Bluetooth-enabled USB: Select to connect a USB storage device to the USB
device in the nearby area within about 2 minutes. port so that it can be played.
If the name of this unit is displayed on the Bluetooth- 2. Select the item with the cursor buttons of the • "USB" becomes selectable after the USB function starts
enabled device's display, select this unit. Paring will end remote controller and press ENTER to confirm your up even if it cannot be selected first. It may take about a
after a short time. selection. minute to start up.
• If a password is requested, enter "0000". • For details on the Setup menu and how to play
• When connecting the unit to any other Bluetooth- Internet radio, DLNA and USB storage device, see
enabled device, start pairing by pressing and holding the Advanced Manual (http://www.onkyo.com/manual/
BLUETOOTH until the BLUETOOTH indicator starts txnr636/adv/en.html).
flashing. This unit can store the data of up to ten paired • To return to the previous screen, press RETURN. To
devices. return to the Home menu, press HOME.
Sleep Timer: Select to turn the unit into standby mode
automatically when the specified time elapses.
InstaPrevue: Select to preview videos input from the
HDMI input jacks collectively in a single screen. The screen
has a main window (current input video) and sub windows
(other input videos). To switch the current input, select the
12
See more at http://safe-manuals.com
Step 3: Playing Back
13
See more at http://safe-manuals.com
Step 3: Playing Back
14
See more at http://safe-manuals.com
1 23 4 56 7 8 9 F G H I J K L
M N O P Q R S T
Front Panel
1 zON/STANDBY button: Turns the unit on or into F MEMORY button: Registers or deletes a station. N PHONES jack: Stereo headphones with a standard plug
standby mode. G TUNING MODE button: Switches the tuning mode. are connected.
2 BLUETOOTH indicator: Flashes while pairing with a H DISPLAY button: Switches the information on the O AUX INPUT HDMI/MHL jacks: An HD video camera or
Bluetooth-enabled device is in progress and stays lit display. MHL-enabled mobile device is connected. It is possible
when pairing is completed. I HOME button: Displays the Home menu. to send video and audio of an MHL-enabled mobile
3 Wi-Fi indicator: Lights when the unit is connected to J Cursor buttons, lTUNINGj button, dPRESETc device.
the wireless LAN router. button and ENTER button: Moves the cursor and P TONE and Tone Level buttons: Adjusts the high tone
4 ZONE 2 button: Controls the ZONE function. confirms the selection. When listening to AM/FM and low tone.
5 Remote control sensor: Receives signals from the broadcasting, tune in to the station with lTUNINGj or Q Input selector buttons: Switches the input to be
remote controller. select the registered station with dPRESETc. played.
6 OFF button: Switches the ZONE function to off. K RETURN button: Returns the display to the previous R USB port: A USB storage device is connected so that
7 Display state. music files stored in it can be played.
8 LISTENING MODE buttons: Allows you to select the L MASTER VOLUME: Allows you to adjust the volume. S SETUP MIC jack: The supplied speaker setup
listening mode. M MUSIC OPTIMIZER button and indicator (North microphone is connected.
9 DIMMER button (North American and Taiwanese American and Taiwanese models): Turns on/off the T HYBRID STANDBY indicator: Lights if the unit enters
models): Switches the brightness of the display. MUSIC OPTIMIZER function that improves the quality of standby mode when the HDMI Through, network
RT/PTY/TP button (European, Australian and Asian the compressed audio. standby or Wakeup from Bluetooth function is enabled.
models): Can be used when receiving the station PURE AUDIO button and indicator (European,
transmitting text information. Australian and Asian models): Switches to the PURE
AUDIO mode.
15
See more at http://safe-manuals.com
1 2 3 4 5 6 7 1 23 4 5 6 7
9 8
Display
16
See more at http://safe-manuals.com
Troubleshooting
HDMI control does not function correctly. Resetting the unit
Before starting the procedure
Problems may be solved by simply turning the power
• Set the CEC link function of the unit to on. It is also Resetting the unit to the status at the time of shipment may
on/off or disconnecting/connecting the power cord,
which is easier than working on the connection, necessary to make the HDMI linked system setting on solve the problem. If the measures above do not solve the
setting and operating procedure. Try the simple the TV. See the TV's instruction manual for details. problem, reset the unit with the following procedure. If you
measures on both the unit and the connected reset the unit status, your preferences will be reset to the
device. If the problem is that the video or audio is not defaults. Note them down before starting reset.
output or the HDMI linked operation does not work, The remote controller does not work.
disconnecting/connecting the HDMI cable may solve How to reset:
it. When reconnecting, be careful not to wind the
HDMI cable since if wound the HDMI cable may not fit
• Be sure to press RCV first before operating the unit with 1. While holding down CBL/SAT on the main unit (note
well. After reconnecting, turn off and on the unit and
the remote controller. that step 2 must be performed with this button
the connected device. pressed down)
There is no sound for Zone function. 2. Press zON/STANDBY on the main unit ("Clear"
appears on the display and the unit returns to
• With Zone function, sound is output only when the signal standby)
The AV receiver turns off unexpectedly.
input source is an external component connected to
• The AV receiver will automatically enter standby mode the analog audio input jacks of the unit, "NET", "USB"
when Auto Standby is set and launched. or "BLUETOOTH". Zone playback is not possible if the Clear
player and the unit are connected via HDMI cable or
digital cable. Connect the RCA audio output jacks of the
There’s no sound, or it’s very quiet. player and the analog audio input jacks of the unit with
analog audio cable. Also analog audio output setting may
• A wrong input selector button has been selected. Select be necessary on the player.
a correct input for the player. Also check that muting is
not on.
• Not all listening modes use all speakers. Cannot access to network. 2. Press zON/
STANDBY.
1. While holding
down CBL/SAT,
• Try plugging/unplugging the unit or the wireless LAN How to reset the remote controller:
There’s no picture. router or check their power-on status. This will work well
in many cases. 1. While holding down RCV on the remote controller,
• A wrong input selector button has been selected. • If the desired wireless LAN router is not in the access press HOME until the remote indicator lights (about
• Video is not displayed if the listening mode is Pure Audio. point list, it may be set to hide SSID or the ANY 3 seconds)
(European, Australian and Asian models) connection may be off. Change the setting and try again.
2. Within 30 seconds, press RCV again
• To display video from the connected player on the TV
screen while the unit is in standby, you need to enable RCV Remote
HDMI Through function. Bluetooth indicator
HOME
17
See more at http://safe-manuals.com
Specifications
Amplifier Section Preset Channel
40
HDMI
Input
IN1 (BD/DVD, 4K), IN2 (CBL/SAT, 4K), IN3 (STB/DVR, 4K, HDCP2.2), IN4
Rated Output Power
All channels: Network Section (GAME, 4K), IN5 (PC), IN6, AUX INPUT (HDMI/MHL) (front)
Output
95 watts minimum continuous power per channel, 8 ohm loads, OUT MAIN (ARC, HDCP2.2), OUT SUB
2 channels driven from 20 Hz to 20 kHz, with a maximum total Ethernet LAN Video Resolution
harmonic distortion of 0.08% (FTC) 10BASE-T/100BASE-TX Pass through: 4K 60 Hz (YCbCr 4:2:0)
115 watts minimum continuous power per channel, 6 ohm loads, 2 Wireless LAN Upscaling: 4K 30 Hz
channels driven at 1 kHz, with a maximum total harmonic distortion IEEE 802.11 b/g/n standard Audio Format
of 0.7% (FTC) (Wi-Fi® standard) DTS-HD Master Audio, DTS-HD High Resolution Audio, Dolby TrueHD,
(North American) 2.4 GHz band: Dolby Digital Plus, DSD, Multichannel PCM
7 ch × 160 W at 6 ohms, 1 kHz, 1 ch driven of 1% (IEC) (Others) 1 - 11 ch (North American) Supported
Maximum Effective Output Power 10 - 11 ch (Spain) 3D, Audio Return Channel, DeepColor, x.v.Color, LipSync, CEC (RIHD),
7 ch × 175 W at 6 ohms, 1 kHz, 1 ch driven (JEITA) (Asian) 10 - 13 ch (France) 4K (Upscaling and Passthrough)
Dynamic Power () 1 - 13 ch (Others)
¼¼IEC60268-Short-term maximum output power (Wi-Fi® standard)
240 W (3 Ω, Front) Video Inputs
210 W (4 Ω, Front) Component
120 W (8 Ω, Front) Bluetooth Section IN (CBL/SAT)
THD+N (Total Harmonic Distortion+Noise) Composite
0.08% (20 Hz - 20 kHz, half power) Communication system IN1 (CBL/SAT), IN2 (STB/DVR), IN3 (GAME)
Damping Factor Bluetooth Specification version 2.1 +EDR (Enhanced Data Rate)
60 (Front, 1 kHz, 8 Ω)
Input Sensitivity and Impedance (Unbalance)
Maximum communication range Video Outputs
Line of sight approx. 15 m () Component
200 mV/47 kΩ (LINE) Frequency band
2.5 mV/47 kΩ (PHONO MM) OUT
2.4 GHz band (2.4000 GHz - 2.4835 GHz) Composite
Rated RCA Output Level and Impedance Modulation method
200 mV/2.2 kΩ (LINE OUT) MONITOR OUT
FHSS (Freq Hopping Spread Spectrum)
Maximum RCA Output Level and Impedance Compatible Bluetooth profiles
2 V/2.2 kΩ (LINE OUT) A2DP 1.2 (Advanced Audio Distribution Profile) Audio Inputs
Phono Overload AVRCP 1.3 (Audio Video Remote Control Profile) Digital
70 mV (MM 1 kHz 0.5% Direct) Supported Codecs OPTICAL (TV/CD)
Frequency Response SBC COAXIAL 1 (BD/DVD), 2 (CBL/SAT)
5 Hz - 100 kHz/+1 dB, –3 dB (Direct mode) Transmission range (A2DP) Analog
Tone Control Characteristics 20 Hz - 20,000 Hz (Sampling frequency 44.1 kHz) BD/DVD, CBL/SAT, STB/DVR, GAME, PC, TV/CD, PHONO
±10 dB, 20 Hz (BASS) ¼¼The actual range will vary depending on factors such as obstacles between
±10 dB, 20 kHz (TREBLE) devices, magnetic fields around a microwave oven, static electricity,
Signal to Noise Ratio Audio Outputs
cordless phone, reception sensitivity, antenna’s performance, operating Analog
106 dB (LINE, IHF-A) system, software application, etc.
80 dB (PHONO MM, IHF-A) ZONE2 LINE OUT
Speaker Impedance 2 SUBWOOFER PRE OUT
6 Ω - 16 Ω (North American and Taiwanese) General Speaker Outputs
4 Ω - 16 Ω (Others) FRONT L/ R, CENTER, SURROUND L/R, BACK or HEIGHT L/R, ZONE2
L/R
Power Supply Phones
Video Section AC 120 V, 60 Hz (North American and Taiwanese) PHONES (Front, ø 6.3)
AC 220 - 240 V, 50/60 Hz (Others)
Input Sensitivity/Output Level and Impedance
Power Consumption Others
6.3 A (North American and Taiwanese) Setup Mic 1 (Front)
1 Vp-p/75 Ω (Component Y) 630 W (Others)
0.7 Vp-p/75 Ω (Component PB/CB, PR/CR) RI 1
0.1 W (Stand-by, North American and Taiwanese) USB 1 (Front)
1 Vp-p/75 Ω (Composite) 0.2 W (Stand-by, Others)
Component Video Frequency Response Ethernet 1
80 W (No-sound)
5 Hz - 100 MHz/+0 dB, –3 dB Dimensions (W × H × D) Specifications and features are subject to change without notice.
435 mm × 173.5 mm × 329 mm
Tuner Section 17-1/8" × 6-13/16" × 12-15/16"
Weight
10.0 kg (22.0 lbs.) (North American and Taiwanese)
FM Tuning Frequency Range 10.5 kg (23.1 lbs.) (Others)
87.5 MHz - 107.9 MHz (North American and Taiwanese)
87.5 MHz - 108.0 MHz, RDS (Others)
AM Tuning Frequency Range
522/530 kHz - 1611/1710 kHz
18
See more at http://safe-manuals.com
Others
License and Trademark Information COMPANY EXPRESSLY DISCLAIMS ANY WARRANTIES, EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO, WARRANTIES OF
TITLE, NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A
“MHL, the MHL Logo, and Mobile High-Definition Link are trademarks or PARTICULAR PURPOSE.
registered trademarks of MHL LLC in the United States and other counties.” Company makes no representation or warranty of any kind, express or implied,
about the completeness, accuracy, validity, legality, reliability, suitability or
Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and the InstaPrevue and the InstaPrevue logo are trademarks or registered trademarks availability with respect to the information, content or services available through
double-D symbol are trademarks of Dolby Laboratories. of Silicon Image, Inc. in the United States and other countries. this device. Company shall not be liable, whether in contract or tort, including
Apple, iPod and iPhone are trademarks of Apple Inc., registered in the U.S. and negligence and strict liability, for any direct, indirect, special, incidental or
other countries. consequential damages or any other damages arising out of, or in connection
with, any information contained in, or as a result of the use of any content or
Apple TV is a trademark of Apple Inc., registered in the U.S. and other service by you or any third party, even if Company has been advised of the
countries. possibility of such damages, nor shall Company be liable for any third party
For DTS patents, see http://patents.dts.com. Manufactured under license from claims against users of this device or any third party.
DTS Licensing Limited. DTS, DTS-HD, the Symbol, & DTS and the Symbol In no event shall Company be responsible nor liable for, without limiting the
together are registered trademarks, and DTS-HD Master Audio is a trademark generality of the foregoing, any interruption or suspension of any information,
of DTS, Inc. © DTS, Inc. All Rights Reserved. content or service available through this device. Company is neither responsible
nor liable for customer service related to the information, content and services
SIRIUS, XM and all related marks and logos are trademarks of Sirius XM Radio available through this device. Any question or request for service relating to
Inc. and its subsidiaries. All rights reserved. the information, content or services should be made directly to the appropriate
DLNA®, the DLNA Logo and DLNA CERTIFIED® are trademarks, service content owners and services providers.
marks, or certification marks of the Digital Living Network Alliance.
Qdeo and QuietVideo are trademarks of Marvell or its affiliates.
This product is protected by certain intellectual property rights of Microsoft. Use
or distribution of such technology outside of this product is prohibited without a Precautions
license from Microsoft.
Windows and the Windows logo are trademarks of the Microsoft group of
companies. For European Models
“CINEMA FILTER” and “CINEMA FILTER (logo)” are trademarks of Onkyo
Corporation. QR Code is a registered trademark of DENSO WAVE INCORPORATED. Declaration of Conformity
AccuEQ, Music Optimizer, RIHD and WRAT are trademarks of Onkyo Safari is a trademark or registered trademark of Apple Computer, Inc. in the
We declare, under our sole responsibility, that
Corporation. United States and other countries.
this product complies with the standards:
“RIHD” and “RIHD (logo)” are trademarks of Onkyo Corporation. “x.v.Color” is a trademark of Sony Corporation. –– Safety
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and –– Limits and methods of measurement of
® Thomson. radio disturbance characteristics
–– Limits for harmonic current emissions
“All other trademarks are the property of their respective owners.”
–– Limitation of voltage changes, voltage
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI fluctuations and flicker
Logo are trademarks or registered trademarks of HDMI Licensing LLC in the –– RoHS Directive, 2011/65/EU
United States and other countries. DISCLAIMER –– Hereby, Onkyo Corporation, declares that this TX-NR636 is in compliance
with the essential requirements and other relevant provisions of Directive
1999/5/EC.
Through this device you are able to link to other services or websites which –– С настоящето, Onkyo Corporation, декларира, че TX-NR636 е в
are not under the control of any company which has designed, manufactured съответствие със съществените изисквания и другитеприложими
or distributed/have distributed this device, and its affiliates (collectively,
разпоредби на Директива 1999/5/EC.
“Company”). We have no control over the nature, content and availability
of those services. The inclusion of any links does not necessarily imply a –– Onkyo Corporation tímto prohlašuje, že TX-NR636 splňuje základní
The Wi-Fi CERTIFIED® Logo is a certification mark of the Wi-Fi Alliance.
recommendation or endorse the views expressed within them. požadavky a všechna příslušná ustanoveni Směrnice 1999/5/ES.
Wi-Fi certified® logo shows international association certifying interoperability
All information, content and services available through this device belong to –– Undertegnede Onkyo Corporation erklærer herved, at følgende udstyr TX-
“Wi-Fi alliance” ensures the product has passed the test for compatibility with
other Wi-Fi certified equipment. third parties and are protected by copyright, patent, trademark and/or other NR636 overholder de væsentlige krav og øvrige relevante krav i direktiv
intellectual property laws of applicable countries. 1999/5/EF.
The information, content and services provided through this device are for your –– Hiermit erklärt Onkyo Corporation, dass sich das Gerät TX-NR636 in
personal, noncommercial use only. Any information, content or services may Übereinstimmung mit den grundlegenden Anforderungen und den übrigen
not be used in any manner other than previously approved by the appropriate einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.
The Bluetooth® word mark and logos are registered trademarks owned by content owner or service provider. –– Käesolevaga kinnitab Onkyo Corporation seadme TX-NR636 vastavust
Bluetooth SIG, Inc. and any use of such marks by Onkyo is under license. You may not modify, copy, republish, translate, exploit, create derivative works, direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele
Other trademarks and trade names are those of their respective owners. upload, post, transmit, sell or distribute in any manner any information, content teistele asjakohastele sätetele.
Onkyo does not guarantee Bluetooth compatibility between the AV receiver and or services available through this device, unless expressly permitted by the –– ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Ο ΚΑΤΑΣΚΕΥΑΣΤΗΣ Onkyo Corporation ΔΗΛΩΝΕΙ
all Bluetooth-enabled devices. appropriate copyright, patent, trademark and/or other intellectual property
ΟΤΙ TX-NR636 ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ
For compatibility between the AV receiver and another device with Bluetooth owner, including, without limitation, content owner or service provider.
THE CONTENT AND SERVICES AVAILABLE THROUGH THIS DEVICE ARE ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ
technology, consult the device’s documentation and dealer. In some countries, –– Por la presente, Onkyo Corporation, declara que este TX-NR636 cumple
there may be restrictions on using Bluetooth devices. Check with your local PROVIDED “AS IS”.
COMPANY DOES NOT WARRANT INFORMATION, CONTENT OR con los requisitos esenciales y otras exigencias relevantes de la Directiva
authorities.
SERVICES SO PROVIDED, EITHER EXPRESSLY OR IMPLIEDLY, FOR ANY 1999/5/EC.
PURPOSE.
19
See more at http://safe-manuals.com
–– Par la présente, Onkyo Corporation déclare que l’appareil TX-NR636 est –– Onkyo Corporation izjavlja, da je ta TX-NR636 v skladu z bistvenimi
conforme aux exigences essentielles et aux autres dispositions pertinentes zahtevami in drugimi relevantnimi določili direktive 1999/5/ES.
de la directive 1999/5/CE. –– Onkyo Corporation vakuuttaa täten että TX-NR636 tyyppinen laite on
–– Con la presente Onkyo Corporation dichiara che questo TX-NR636 è direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin
conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite muiden ehtojen mukainen.
dalla direttiva 1999/5/CE. –– Härmed förklarar Onkyo Corporation att denna TX-NR636 följer de
–– Ar šo Onkyo Corporation deklarē, ka TX-NR636 atbilst Direktīvas 1999/5/ väsentliga kraven och andra relevanta stadgar i Direktiv 1999/5/EC.
EK būtiskajām prasībām un citiem ar to saistītajiem noteikumiem. –– Hér með lýsir Onkyo Corporation því yfir að varan TX-NR636 er í samræmi
–– Šiuo Onkyo Corporation deklaruoja, kad šis TX-NR636 atitinka esminius við grunnkröfur og aðrar kröfur sem gerðar eru í tilskipun 1999/5/EC.
reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. –– Onkyo Corporation erklærer herved at denne TX-NR636 er i
–– A Onkyo Corporation ezzennel kijelenti, hogy a TX-NR636 típusú beren- overensstemmelse med vesentlige krav og andre relevante bestemmelser i
dezés teljesíti az alapvető követelményeket és más 1999/5/EK irányelvben direktiv 1999/5/EC.
meghatározott vonatkozó rendelkezéseket. –– Ovime Onkyo Corporation, potvrđuje da je TX-NR636 u suglasnosti sa
–– Hierbij verklaart Onkyo Corporation dat het toestel l TX-NR636 in osnovnim zahtjevima i ostalim relevantnim odredbama Direktive 1999/5/EC.
overeenstemming is met de essentiële eisen en de andere relevante
bepalingen van richtlijn 1999/5/EG.
–– Niniejszym Onkyo Corporation deklaruje że TX-NR636 jest zgodny
z zasadniczymi wymaganiami i innymi właściwymi postanowieniami
Dyrektywy 1999/5/EC.
–– Eu, Onkyo Corporation, declaro que o TX-NR636 cumpre os requisitos
essenciais e outras provisões relevantes da Directiva 1999/5/EC.
–– Prin prezenta, Onkyo Corporation, declară că aparatul TX-NR636 este
în conformitate cu cerinţele esenţiale şi cu alte prevederi pertinente ale
Directivei 1999/5/CE.
–– Onkyo Corporation týmto vyhlasuje, že TX-NR636 a spĺňa základné
požiadavky a všetky príslušné ustanovenia Smernice 1999/5/ES.
Europe (Mainland)
Kitahama Chuo Bldg, 2-2-22 Kitahama, Chuo-ku, 1301, 555 Tower, No.555 West NanJing Road, Jing’an District,
OSAKA 541-0041, JAPAN Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY Shanghai, China 200041,
http://www.onkyo.com/ Tel: +49-8142-4401-0 Fax: +49-8142-4208-213 Tel: 86-21-52131366 Fax: 86-21-52130396
http://www.eu.onkyo.com/ http://www.cn.onkyo.com/
The Americas
Asia, Oceania, Middle East, Africa
18 Park Way, Upper Saddle River, N.J. 07458, U.S.A. Meridien House, Ground floor, 69 - 71 Clarendon Road, Please contact an Onkyo distributor referring to Onkyo
For Dealer, Service, Order and all other Business Inquiries: Watford, Hertfordshire, WD17 1DS, United Kingdom SUPPORT site.
Tel: 201-785-2600 Fax: 201-785-2650 Tel: +44 (0)8712-00-19-96 Fax: +44 (0)8712-00-19-95 http://www.intl.onkyo.com/support/
http://www.us.onkyo.com/ China The above-mentioned information is subject to change
For Product Support Team Only: (Hong Kong) without prior notice.
1-800-229-1687 Unit 1033, 10/F, Star House, No 3, Salisbury Road, Visit the Onkyo web site for the latest update.
Tsim Sha Tsui Kowloon, Hong Kong.
Tel: 852-2429-3118 Fax: 852-2428-9039
http://www.hk.onkyo.com/
D1402-0
SN 29401739
(C) Copyright 2014 Onkyo Corporation Japan. All rights reserved.
* 2 9 4 0 1 7 3 9 *