ZTE

Resource
Ne Type Index KPI&Counter
Type

Uplink Noise Rise & Average Number of

Uplink load (KPI300840-KPI300843)& C310030463
Cell-Dch user in the best cell

(Average non-HSDPA TCP Utilization Ratio

Downlink or Maximum non-HSDPA TCP Utilization) &
(KPI300829 or KPI300830)& C310030463
power Average Number of Cell-Dch user in the
CELL best cell

Downlink
Average utilization of non-HSDPA code
code C372490218 ( from Node B V4.12.10.23P21)
resources
resource

verage
throughput Average throughput of HSDPA subscriber &
(C310545121/(C310545123*Gr))&PI300844
of HSDPA The best Cell Average HSDPA Users
subscriber
KPI 300795
(OMCR parameter GResPara48 should be set
CellGroup Average CE Utilization,UL with new value: GResPara48new = GResPara48old
Or 0x10)
CE resource
utilization CellGroup Average CE Utilization,DL KPI 300797
Maximum Utilization Ratio of Uplink Cell
C310840004
Group CENode B
Maximum Utilization Ratio of Downlink Cell
C310840008
Group CENode B
C370020008
Ethernet port
(from Node B V4.12)
C370020009
Ethernet port
(from Node B V4.12)

Node B Ethernet port C370020032

capacity
expansion Iub transport Ethernet port C370020033
bandwidth
utilization Platform IMA group C370070008

Platform IMA group C370070009

Platform IMA group C370070010

Platform IMA group C370070011

Average CPU usage C370010001

CC board
utilization
Maximum CPU usage C370010000

Iub
Transport Iub uplink signaling link utilization (ATM- C311490000*53*8/1000/Gr/Uplink signaling link
Resource E1/ATM-STM) configuration bandwidth
(ATM-
E1ATM-
STM)
<> 11 , 1
ZTE Iub
Transport
Resource
(ATM-
E1ATM- Iub downlink signaling link utilization (ATM- C311490001*53*8/1000/Gr/Downlink signaling
STM) E1/ATM-STM) link configuration bandwidth
Iub
Transport
Iub Uplink and Downlink Signaling Link
ResourceI Refer to Association
Utilization (IP-E1IP-FE)
P-E1IP-
FE
Iub Uplink
and
Downlink
Bandwidth Iub uplink bandwidth utilization on ATM Sum(C311490000for PVC of
Utilization on media plane(ATM-E1ATM-STM) TrPath)*53*8/1000/Gr/ C311110001
the ATM
Media
PlaneATM Iub downlink bandwidth utilization on ATM Sum(C311490001for PVC of
-E1ATM- media plane(ATM-E1ATM-STM) TrPath)*53*8/1000/Gr/ C311110000
Iub Uplink
STM (C311880029+C311880030+C311880031+C311
and Iub uplink bandwidth utilization on IP media
880036+C311880037+C311880038)*8/Gr/
Downlink plane C311110016
Bandwidth
Utilization on Iub downlink bandwidth utilization on IP (C311880025+C311880026+C311880027+C311
the IP Media media plane 880028+C311880032+C311880033+C31188003
Plane 4+C311880035)*8/Gr/ C311110015
CID
Resource
Utilization Average CID resource utilization (ATM-
C312230011/248
ATM- E1ATM-STM)
E1ATM-
STM
Iub/Iur/Iu Maximum CID resource utilization(ATM-
C312230012/248
E1ATM-STM)
Iur/IuUplink
and
Downlink
Refer to Broadband SS7 Signaling Link
Signaling
Resource
Link
Utilization
ATM

Iur Uplink
and
Downlink
Signaling Refer to Association Resource Refer to Association
Link
Utilization
(IP)
Iur Uplink
and Iur uplink bandwidth utilization on media
C310730273*8/Gr/C310730007
Downlink plane
Bandwidth
Utilization on Iur downlink bandwidth utilization on media C310730274*8/Gr/C310730008
Media Plane plane
Iu Uplink
and Iu uplink bandwidth utilization on media
(C310790001+C310790007)*8/Gr/C310790009
Downlink plane
Bandwidth
RNC(V3) Utilization on Iu downlink bandwidth utilization on media (C310790002+C310790008)*8/Gr/C310790010
plane
Capacity Media
UplinkPlane
and
Expansion Downlink Uplink broadband SS7signaling link
Broadband utilization C311010045/10000
SS7
Signaling Downlink broadband SS7 signaling link
Link C311010044/10000
utilization
Utilization
Association Traffic sent on an association C311100009
Resource
Monitoring

<> 11 , 2
Expansion

ZTE
Association
Resource
Monitoring Traffic received on an association C311100010

CMP CPU Mean ratio of the CPU usage C311340001

Usage
Peak ratio of the CPU usage C311340000

DMP CPU Mean ratio of the CPU usage C311340001

Usage
Peak ratio of the CPU usage C311340000
Total
Number of
Paging Total Number of Paging message received
C310680207
message from CN
received
from CN
Sum(C311490000*53*8/1000000/Gr,for
Rx traffic utilization of APBE/SDTA2 boards
board)/300
Sum(C311490001*53*8/1000000/Gr,for
Tx traffic utilization of APBE/SDTA2 boards
board)/300
Traffic Rx traffic utilization of SDTA1/SDTA3/DTA Sum(C311490000*53*8/1000000/Gr,for
Monitoring boards board)/240
of ATM
Interface Tx traffic utilization of SDTA1/SDTA3/DTA Sum(C311490001*53*8/1000000/Gr,for
Boards boards board)/240
Sum(C311490000*53*8/1000000/Gr,for
Rx traffic utilization of DTA boards
board)/60
Sum(C311490001*53*8/1000000/Gr,for
Tx traffic utilization of DTA boards
board)/60
(C311930003)* 4294967296+ C311930002)/ Gr/
GIPI/GIPI4 Rx utilization MAX_IP_THROU_V3MAX_IP_THROU_V3
GIPI:750Mbps, GIPI4:1500Mbps,750Mbps
(C311930037)* 4294967296+ CC311930036)/
GIPI/GIPI4 Tx utilization
Gr/ MAX_IP_THROU_V3
IP Interface (C311930005* 4294967296+ C311930004)/ Gr/
GIPI Rx utilization(RX_PPS)
Board (420*1000)
(C311930039*4294967296+ C311930038)/ Gr /
GIPI Tx utilization(TX_PPS)
(420*1000)
(C311930039*4294967296+
GIPI4 Tx and Rx utilization (Total_PPS) C311930038+C311930039*4294967296+
C311930038))/ Gr / (1080*1000)
IPoE sum(C311390000)*8/Gr/1000000/MAX_IPOE_T
Interface DTI/SDTI Rx traffic utilization HROU_V3MAX_IPOE_THROU_V3DTI
Board 55Mbps,SDTI:220Mbps)
Utilization(D sum(C311390010)*8/Gr/1000000/MAX_IPOE_T
TI/SDTI) DTI/SDTI Tx traffic utilization HROU_V3
The max usage of CE resource of RUP C310870002
RUP Board
Resource Average RUP CE utilization C310870004
Utilization
Mean ratio of the RUP CPU usage C311340001
Iub
Transport Iub uplink signaling link utilization (ATM- C380220003*53*8/1000/Gr/Uplink signaling link
Resource E1/ATM-STM) configuration
(ATM-
E1ATM- Iub downlink signaling link utilization (ATM- C380220004*53*8/1000/Gr/Downlink signaling
STM) E1/ATM-STM) link configuration bandwidth
Iub
Transport
Iub Uplink and Downlink Signaling Link
ResourceI Refer to Association
Utilization (IP-E1IP-FE)
P-E1IP-
FE

<> 11 , 3
ZTE
Iub Uplink
and
Downlink
Bandwidth Iub uplink bandwidth utilization on ATM Sum(C380220003for PVC of
Utilization on media plane(ATM-E1ATM-STM) TrPath)*53*8/1000/Gr/ C380000002
the ATM
Media
PlaneATM Iub downlink bandwidth utilization on ATM Sum(C380220004for PVC of
-E1ATM- media plane(ATM-E1ATM-STM) TrPath)*53*8/1000/Gr/ C380000001
Iub Uplink
STM (C311880029+C311880030+C311880031+C311
and Iub uplink bandwidth utilization on IP media
880036+C311880037+C311880038)*8/Gr/
Downlink plane C380000017
Bandwidth
Utilization on Iub downlink bandwidth utilization on IP (C311880025+C311880026+C311880027+C311
the IP Media media plane 880028+C311880032+C311880033+C31188003
Plane 4+C311880035)*8/Gr/ C380000016
CID
Resource
Utilization Average CID resource utilization (ATM-
C380030011/248
ATM- E1ATM-STM)
E1ATM-
STM
Iub/Iur/Iu Maximum CID resource utilization(ATM-
C380030012/248
E1ATM-STM)
Iur/IuUplink
and
Downlink
Refer to Broadband SS7 Signaling Link
Signaling
Resource
Link
Utilization
ATM

Iur Uplink
and
Downlink
Signaling Refer to Association Resource Refer to Association
Link
Utilization
(IP)
Iur Uplink
and Iur uplink bandwidth utilization on media
C310730273*8/Gr/C310730007
Downlink plane
Bandwidth
Utilization on Iur downlink bandwidth utilization on media C310730274*8/Gr/C310730008
Media Plane plane
Iu Uplink
and Iu uplink bandwidth utilization on media
(C310790001+C310790007)*8/Gr/C310790009
Downlink plane
Bandwidth
Utilization on Iu downlink bandwidth utilization on media (C310790002+C310790008)*8/Gr/C310790010
RNC(V4) Media plane
UplinkPlane
and
Capacity Downlink
Expansion Broadband Uplink broadband SS7signaling link
C380120019/10000
utilization
SS7
Signaling Downlink broadband SS7 signaling link
Link C380120020/10000
utilization
Utilization
Association Traffic sent on an association C380170009
Resource
Monitoring Traffic received on an association C380170010

Cu CPU Mean ratio of the CPU usage C380710001

Usage
Peak ratio of the CPU usage C380710002

DUc CPU Mean ratio of the CPU usage C380710005

Usage

<> 11 , 4
ZTE
DUc CPU
Usage
Peak ratio of the CPU usage C380710006
Total
Number of
Paging Total Number of Paging message received
C310680207
message from CN
received
from CN

Mean ratio of CPU usage C380360004

Rx traffic utilization of
Traffic Sum(C380220003*53*8/1000000/Gr)/300
EAPB/ESDTA/EAPB1b/ESDTA1b boards
Monitoring
Tx traffic utilization of
of ATM Sum(C380220004*53*8/1000000/Gr)/300
EAPB/ESDTA/EAPB1b/ESDTA2b boards
Interface No limit is set on the traffic of an EDTA/EDTA1b
Boards board because the traffic is limited by the
EDTA/EDTA1b number of ports available on the board. It is
unnecessary to monitor the traffic of an
EDTAEDTA1b board.
sum(C380260001*4294967296+C380260002,for
board)*8/
EGPB/EXGB1b/EXGB2a/EXGB1a/EXGB2c
(Gr*1000000)/MAX_IP_THROU_V4(EGPB:3000
Rx traffic utilization
Mbps, EXGB1B:3000, EGPB2A:6000,
EXGB1A:15000, EGPB2C:3000)
IP Interface EGPB/EXGB1b/EXGB2a/EXGB1a/EXGB2c
sum(C380260003*4294967296+C380260004,for
Board Tx traffic utilization
board) * 8/(Gr*1000000)/MAX_IP_THROU_V4
sum(C380460001+C380460004+C380460007+
EGPB/EXGB1b/EXGB2a/EXGB1a/EXGB2c C380460010)/Gr/(1000*MAX_IP_PPS_V4)
PPS utilization (EGPB:1000K,EXGB1b/EXGB2a/EXGB1a/EXG
B2c:2500K)
sum(C380250002,for port)*8 / (Gr *
EDTI/ESDTI/EDTI2a/ESDTI2a Rx 1000000)/MAX_IPOE_THROU_V4(MAX_IPOE_
bandwidth utilization THROU_V4:EDTI:55Mbps, ESDTI:440Mbps,
EDTI2a:55Mbps, ESDTI2a:880Mbps)
IPoE
Interface
Board EDTI/ESDTI/EDTI2a/ESDTI2a Tx sum(C380250004,for port)*8 / (Gr *
Utilization bandwidth utilization 1000000)/MAX_IPOE_THROU_V4

sum(C380250001+C380250003)8 / (Gr *
ESDTI/ESDTI2a PPS utilization 1000)/MAX_IPOE_PPS_V4(MAX_IPOE_PPS_V
4: ESDTI:1100K,ESDTI2a:1600K,)
DUm C380710009 Mean ratio of Dum CPU usage
Resource
Utilization C380710010 Max ratio of Dum CPU usage

<> 11 , 5
ZTE

Expansion
Alarm Threshold Expansion Threshold Optimization Method
Method
Optimizes the R99 power control
parameters.
(KPI300840- (KPI300840- Adjusts the HSUPA E-TTI Switching.
Multi-carrier/Add
KPI300843>=4dB)& KPI300843>=6dB)& Adjusts the MAXRTWP of the cell.
site
(C310030463>=16) (C310030463>=16) Uses the functions of self-adaptive power
control and no power transmission for null
packets.

Optimizes DRBC parameters to accelerate

the radio bearer down-speed.
(KPI300829>=45% or (KPI300829>=55% or Expand Adjusts the DPCH downlink transmission
KPI300830>=80%)&(C KPI300830>=90%)&(C transmission power.
310030463>=16) 310030463>=16) power/Add site Adjusts the ration between PCPICH
transmission power and maximum downlink
transmission power of the cell.

C372490218 >=70% C372490218 >=80%

Enables the dynamic code resource
(Dynamic code (Dynamic code
function.
resource function resource function Multi-carrier/Add
Optimizes the levels for downlink DRBC rate
activated&Node B activated&Node B site
adjustment.
version from version from
Reduce HSDPA channel.
V4.12.10.23P21); V4.12.10.23P21);
(C310545121/ (C310545121/ Adjusts the MPO.
(C310545123*Gr)<=10 (C310545123*Gr)<=50 HSPA+/Multi- Adjusts the maximum number of HS-
00kbps)& 0kbps)& carrier/Add site PDSCH channels allowed to be configured
PI300844>=16 PI300844>=16 in the cell.

60% 70% Add BPC/BPK

60% 70% Add BPC/BPK

80% 90% Add BPC/BPK

80% 90% Add BPC/BPK

Expand
50% 60%
transmission
Expand
50% 60%
transmission
Expand
80% 90%
transmission
Expand
80% 90%
transmission
Expand
50% 60%
transmission
Expand
50% 60%
transmission
Expand
80% 90%
transmission
Expand
80% 90%
transmission
Replace CC
75% 80% board to CC16
board
Replace CC
85% 90% board to CC16
board

Expand
50% 60%
transmission

<> 11 , 6
ZTE

Expand
50% 60%
transmission

Expand
transmission

Expand
50% 60%
transmission

Expand
50% 60%
transmission

Expand
50% 60%
transmission

Expand
50% 60%
transmission

Expand
70% 80%
transmission

Expand
80% 90%
transmission

Expand
transmission

Expand
transmission

Expand
50% 70%
transmission

Expand
50% 70%
transmission

Expand
50% 70%
transmission

Expand
50% 70%
transmission

Expand
20% 40%
transmission

Expand
20% 40%
transmission
Expand
200k 400k
transmission

<> 11 , 7
ZTE

Expand
150k 300k
transmission
Adjust Cell location to achieve load
60% 70% Add CMP
balancing
Adjust Cell location to achieve load
70% 80% Add CMP
balancing
60% 70% Add DMP

70% 80% Add DMP

C310680207 the C310680207>the

number of CMP number of CMP
Module involved in Module involved in Add CMP Adjust SS7 Link configuration
paging720,000*80 paging720,000*
% 90%

Expand
70% 80%
transmission
Expand
70% 80%
transmission
Expand
70% 80%
transmission
Expand
70% 80%
transmission
Expand
70% 80%
transmission
Expand
70% 80%
transmission

Expand
70% 80%
transmission

Expand
70% 80%
transmission
Expand
70% 80%
transmission
Expand
70% 80%
transmission

Expand
70% 80%
transmission

Expand
70% 80%
transmission

Expand
70% 80%
transmission
80% 90% Add RUP Board

70% 80% Add RUP Board

60% 70% Add RUP Board

Expand
70% 80%
transmission

Expand
70% 80%
transmission

Expand
transmission

<> 11 , 8
ZTE

Expand
50% 60%
transmission

Expand
50% 60%
transmission

Expand
50% 60%
transmission

Expand
50% 60%
transmission

Expand
70% 80%
transmission

Expand
80% 90%
transmission

Expand
transmission

Expand
transmission

Expand
50% 70%
transmission

Expand
50% 70%
transmission

Expand
50% 70%
transmission

Expand
50% 70%
transmission

Expand
20% 40%
transmission

Expand
20% 40%
transmission
Expand
1.5M 2M
transmission
Expand
1.2M 1.7M
transmission
Adjust Cell location to achieve load
60% 70% Add Cu
balancing
Adjust Cell location to achieve load
70% 80% Add Cu
balancing
60% 70% Add Duc

<> 11 , 9
ZTE

70% 80% Add Duc

C310680207 >the C310680207>the

number of CMP number of CMP
Adjust
Module involved in Module involved in Adjust configuration
configuration
paging paging 1,440,000
1,440,00080% 90%

Expand
60% 80%
transmission

Expand
70% 80%
transmission

Expand
70% 80%
transmission

Expand
70% 80%
transmission

Expand
70% 80%
transmission

Expand
70% 80%
transmission

Expand
70% 80%
transmission

Expand
70% 80%
transmission

60% 70% Add Dum

70% 80% Add DUm

<> 11 , 10
ZTE

Type Counter Name Threshold Possible Cause

Blocking Rate of RAB Setup(Due 1.Incorrectly configured power,
to Power) especially too high power of the CPICH
Radio link 300188 > 1%
channel
capacity
2.Too many Subscriber
expansion
Blocking Rate of RAB Setup(Due 1.Too many Subscriber
300190 to Code) > 1%
2.Dynamic code resources disabled
Blocking Rate of RAB Setup(Due 1.Unbalanced cell group allocation
300189 to CE) >1% 2.Too many Subscriber and restricted
CE resource
Blocking Rate of RAB Setup(Due 1.Transport failure
to IUB)
300191 > 1% 2.Configuration error
Node B 3.Too many Subscriber and restricted
capacity transport
expansion Number of failed RAB assignment
1.Too high CC load
C310110412 setup in cell for PS domain, Due to > 100
Node B
2.Other faults of the Node B
Number of failed RAB assignment
C310110543 for voice, due to Node B > 10 1.Too high CC load
Explanation
2.Other faults of the Node B

<> 02/21/2017 11 , 11