2.1.

3 Amount of substance
The mole is the key concept for chemical calculations

DEFINITION: The mole is the amount of substance in grams that has the same number of particles as there are
atoms in 12 grams of carbon-12.

DEFINITION: Relative atomic mass is the average mass of one atom compared to one twelfth of the mass of
one atom of carbon-12

DEFINITION: Molar Mass is the mass in grams of 1 mole of a substance and is given the unit of g mol-1

Molar Mass for a compound can be calculated by adding

up the mass numbers(from the periodic table) of each
element in the compound
eg CaCO3 = 40.1 + 12.0 +16.0 x3 = 100.1

molar gas volume (gas volume per mole, units dm3 mol1) . This is the volume of 1 mole of a gas at a
given temperature and pressure. All gases have this same volume. At room pressure (1atm) and room
temperature 25oC the molar gas volume is 24 dm3 mol1

Avogadro's Constant
There are 6.02 x 1023 atoms in 12 grams of carbon-12. Therefore explained in simpler terms 'One mole of any
specified entity contains 6.02 x 1023 of that entity':

1 mole of copper atoms will contain 6.02 x 1023 atoms

Avogadro's Constant can be
1 mole of carbon dioxide molecules will contain 6.02 x 1023 molecules
used for atoms, molecules and
1 mole of sodium ions will contain 6.02 x 1023 ions
ions

For pure solids and gases Example 1: What is the amount, in mol, in 35g of
CuSO4?
amount = mass
amount = mass/Mr
Mr
= 35/ (63.5 + 32 +16 x4)
Unit of Mass: grams = 0.219 mol
Unit of amount : mol

N Goalby chemrevise.org 1
Empirical formulae

Definition: An empirical formula is the simplest ratio of atoms of each element in the compound.

General method
The same method can be
Step 1 : Divide each mass (or % mass) by the atomic mass of the element used for the following types
Step 2 : For each of the answers from step 1 divide by the smallest one of of data:
those numbers. 1. masses of each element
in the compound
Step 3: sometimes the numbers calculated in step 2 will need to be multiplied
up to give whole numbers. 2. percentage mass of each
element in the compound
These whole numbers will be the empirical formula.

Example 2 : Calculate the empirical formula for a compound that contains 1.82g of
K, 5.93g of I and 2.24g of O

Step1: Calculate amount, in mol, by dividing each mass by the atomic mass of the element
K = 1.82 / 39.1 I = 5.93/126.9 O = 2.24/16
= 0.0465 mol = 0.0467mol = 0.14 mol
Step 2 For each of the answers from step 1 divide by the smallest one of those numbers.
K = 0.0465/0.0465 I = 0.0467/0.0465 O = 0.14 / 0.0465
=1 =1 =3

Empirical formula =KIO3

Molecular formula from empirical formula

Definition: A molecular formula is the actual number of atoms of each element in the compound.

From the relative molecular mass (Mr) work out how many times
the mass of the empirical formula fits into the Mr.

Example 3. work out the molecular formula for the

compound with an empirical formula of C3H6O and The Mr does not need to be exact to turn an
a Mr of 116 empirical formula into the molecular formula
because the molecular formula will be a
C3H6O has a mass of 58 whole number multiple of the empirical
The empirical formula fits twice into Mr of 116 formula

So molecular formula is C6H12O2

N Goalby chemrevise.org 2
Hydrated salt

A Hydrated salt contains water of crystallisation Example 4

Na2SO4 . xH2O has a molar mass of 322.1, Calculate
.
Cu(NO3)2 6H2O the value of x
hydrated copper (II) nitrate(V). Molar mass xH2O = 322.1 (23x2 + 32.1 + 16x4)
= 180
Cu(NO3)2 X = 180/18
Anhydrous copper (II) nitrate(V). =10

This method could be used for measuring mass loss in various

Heating in a crucible thermal decomposition reactions and also for mass gain when
reacting magnesium in oxygen.

The lid improves the accuracy of the

The water of crystallisation in calcium sulphate crystals can be
experiment as it prevents loss of solid
removed as water vapour by heating as shown in the following
from the crucible but should be loose
equation.
fitting to allow gas to escape.
CaSO4.xH2O(s) CaSO4(s) + xH2O(g)
Method.
Weigh an empty clean dry crucible and lid .
Add 2g of hydrated calcium sulphate to the crucible and
weigh again
Heat strongly with a Bunsen for a couple of minutes
Allow to cool
Weigh the crucible and contents again
Heat crucible again and reweigh until you reach a constant
mass ( do this to ensure reaction is complete).

Large amounts of hydrated calcium sulphate, such as

50g, should not be used in this experiment as the
decomposition is like to be incomplete.
Small amounts the solid , such as
0.100 g, should not be used in
The crucible needs to be dry otherwise a wet crucible this experiment as errors in
would give an inaccurate result. It would cause mass loss weighing are too high.
to be too large as water would be lost when heating.

Example 5. 3.51 g of hydrated zinc sulphate were heated and 1.97 g

of anhydrous zinc sulphate were obtained.
Use these data to calculate the value of the integer x in ZnSO4.xH2O

Calculate the mass of H2O = 3.51 1.97 = 1.54g

Calculate moles Calculate moles = 1.54
= 1.97 of H2O
of ZnSO4 161.5 18

= 0.0122 mol =0.085 mol

Calculate ratio of mole

of ZnSO4 to H2O = 0.0122 = 0.085
0.0122 0.0122
=7
=1
X=7

N Goalby chemrevise.org 3
Calculation of reacting masses, gas volumes and mole concentrations

Commonly in questions converting between quantities of substances reacting we will use more than just mass data. We
might have the volume and concentration of a solution, or the volume of a gas. We need to adapt our existing method or
reacting masses to include other quantities. Any of the equations below can be used to convert quantities into moles.
Learn these equations carefully and what units to use in them.

1. For pure solids, liquids and gases 2. For Gases 3. For solutions

amount = mass Gas Volume (dm3)= amount x 24 Concentration = amount

MolarMass volume
This equation give the volume of a
gas at room pressure (1atm) and Unit of concentration: mol dm-3 or M
Unit of Mass: grams
room temperature 25oC. Unit of Volume: dm3
Unit of amount : mol
Or use the ideal gas equation to
work out gas volumes at other Converting volumes
It is usually best to give temperatures and pressures
your answers to 3sf cm3 dm3 1000
PV = nRT
cm3 m3 1000 000
dm3 m3 1000
Simple mole calculations
Some Simple calculations using above equations

Example 6: What is the concentration of solution made by Example 7 : What is the volume in dm3 at room temperature
dissolving 5g of Na2CO3 in 250 cm3 water? and pressure of 50g of Carbon dioxide gas ?

amount = mass/Mr amount = mass/Mr

= 5 / (23 x2 + 12 +16 x3) = 50/ (12 + 16 x2)
= 0.0472 mol = 1.136 mol
conc= amount/Volume Gas Volume (dm3)= amount x 24
= 0.0472 / 0.25 = 1.136 x 24
= 0.189 mol dm-3 = 27.26 dm3 ( or 27.3 dm3 to 3 sig fig)

Ideal Gas Equation

The ideal gas equation is a slightly more difficult way of working PV = nRT
out a gas volume. It can calculate the volume for any
temperature and pressure though so is a more useful method. Unit of Pressure (P):Pa
Unit of Volume (V): m3
The biggest problems students have with this equation is choosing Unit of Temp (T): K
and converting to the correct units, so pay close attention to the units. n= moles
R = 8.31 JK1mol1
Example 8: What is the mass of Cl2 gas that has a
Converting temperature
pressure of 100kPa, temperature 293K, volume 500cm3.
oC K add 273
(R = 8.31 JK1mol1)
100 kPa = 100 000 Pa
moles = PV/RT 500 cm3 = 0.0005 m3
= 100 000 x 0.0005 / (8.31 x 293)
= 0.0205 mol

Mass = moles x Mr
= 0.0205 x (35.5 x2)
= 1.46 g

N Goalby chemrevise.org 4
Avogadro's Constant

The mole is the amount of substance in Avogadro's Constant

grams that has the same number of There are 6.02 x 1023 atoms in 12 grams of carbon-12. Therefore
particles as there are atoms in 12 grams explained in simpler terms 'One mole of any specified entity
of carbon-12. contains 6.02 x 1023 of that entity':

1 mole of copper atoms will contain 6.02 x 1023 atoms

Avogadro's Constant can be
1 mole of carbon dioxide molecules will contain 6.02 x 1023 molecules
used for atoms, molecules and
1 mole of sodium ions will contain 6.02 x 1023 ions
ions

No of particles = amount of substance (in mol) X Avogadro's constant

Example 9 : How many atoms of Tin are Example 10 : How many chloride ions are there in a 25.0
there in a 6.00 g sample of Tin metal? cm3 of a solution of magnesium chloride of concentration
amount = mass/Ar 0.400 moldm-3 ?
= 6/ 118.7 amount= concentration x Volume
= 0.05055 mol MgCl2 = 0.400 x 0.025

Number atoms = amount x 6.02 x 1023 = 0.0100 mol

There are two moles of
= 0.05055 x 6.02 x 1023 Amount of chloride ions = 0.0100 x2 chloride ions for every
= 3.04 x1022 = 0.0200 one mole of MgCl2
Number ions of Cl- = amount x 6.02 x 1023
= 0.0200 x 6.02 x 1023
= 1.204 x1022

N Goalby chemrevise.org 5
Converting quantities between different substances using a balanced equation Typically we are given a quantity of
one substance and are asked to
N2 + 3H2 2NH3 work out a quantity for another
substance in the reaction. Any of
The balancing (stoichiometric) numbers are mole ratios
the above three equations can be
e.g. 1 mol of N2 reacts with 3 mol of H2 to produce 2mol of NH3 used.

Step 3
Step 1:
Convert amount, in mol, of second
Use one of the above 3 equations to Step 2:
substance into quantity question
convert any given quantity into amount Use balanced equation to convert
asked for using relevant equation
in mol amount in mol of initial substance
e.g. amount ,Mr mass
Mass amount into amount in mol of second
Amount gas vol gas
Volume of gas amount substance
amount, vol solution conc
Conc and vol of solution amount

Example 12: 23.6cm3 of H2SO4 neutralised 25.0cm3 of 0.15M

Example 11: What mass of Carbon dioxide would be
NaOH. What is the concentration of the H2SO4?
produced from heating 5.5 g of sodium
H2SO4 + 2NaOH Na2SO4 +2H2O
hydrogencarbonate?
2NaHCO3 Na2CO3 + CO2 + H2O
Step 1: work out amount, in mol, of sodium hydrogencarbonate Step 1: work out amount, in mol, of sodium hydroxide
amount = mass / Mr amount = conc x vol
= 5.5 /84 = 0.15 x 0.025
= 0.0655 mol = 0. 00375 mol

Step 2: use balanced equation to give amount in mol of CO2 Step 2: use balanced equation to give moles of H2SO4
2 moles NaHCO3 : 1 moles CO2 2 moles NaOH : 1 moles H2SO4
So 0.0655 HNO3 : 0.0328mol CO2 So 0.00375 NaOH : 0.001875 mol H2SO4

Step 3: work out mass of CO2

Step 3 work out concentration of H2SO4
Mass = amount x Mr
= 0.0328 x 44.0 conc= amount/Volume
=1.44g = 0.001875 / 0.0236
= 0.0794 mol dm-3

Example 13: What volume in cm3 of oxygen gas would be Example 14: What mass of Copper would react completely with
produced from the decomposition of 0.532 g of potassium 150 cm3 of 1.6M nitric acid?
chlorate(V)? 3Cu + 8HNO3 3Cu(NO3 )2 + 2NO + 4H2O
2KClO3 2 KCl + 3O2
Step 1: work out amount, in mol, of potassium chlorate(V)? Step 1: work out amount, in mol, of nitric acid
amount = mass / Mr amount = conc x vol
= 0.532 /122.6 = 1.6 x 0.15
= 0.00434 mol = 0.24 mol

Step 2: use balanced equation to give amount in mol of O2 Step 2: use balanced equation to give moles of Cu
2 moles KClO3 : 3 moles O2 8 moles HNO3 : 3 moles Cu
So 0.00434 HNO3 : 0.00651mol O2 So 0.24 HNO3 : 0.09 (0.24 x 3/8) mol Cu

Step 3: work out volume of O2 Step 3: work out mass of Cu

Gas Volume (dm3)= amount x 24 Mass = amount x Mr
= 0.09 x 63.5
= 0.00651 x 24 =5.71g
= 0.156 dm3
= 156 cm3

N Goalby chemrevise.org 6
 % Yield
% yield in a process can be lowered through
actual yield incomplete reactions, side reactions, losses during
percentage yield = x 100 transfers of substances, losses during purification
theoretical yield stages.

Example 7: 25g of Fe2O3 was reacted and it produced 10g of Fe. What is the percentage yield?
Fe2O3 + 3CO 2Fe + 3 CO2
First calculate maximum mass of Fe that could be produced
Step 1: work out amount in mol of Iron oxide
amount = mass / Mr
=25 / 159.6
= 0.1566 mol

Step 2: use balanced equation to give moles of Fe

1 moles Fe2O3 : 2 moles Fe
So 0.1566 Fe2O3 : 0.313moles Fe

% yield = (actual yield/theoretical yield) x 100

Step 3: work out mass of Fe
Mass = amount x Mr = (10/ 17.48) x 100
= 0.313 x 55.8
=17.48g =57.2%

% Atom Economy

Mass of useful products Do take into account

percentage balancing numbers
= x 100
atom economy when working out %
Mass of all reactants
atom economy.

Example 8 : What is the % atom economy for the following reaction where Fe is
the desired product assuming the reaction goes to completion?
Fe2O3 + 3CO 2Fe + 3 CO2
% atom economy = (2 x 55.8)
x 100
(2 x 55.8 + 3x16) + 3 x (12+16)
=45.8%

Sustainable chemistry requires chemists to design Reactions where there is only one product where all
processes with high atom economy that minimise atoms are used making product are ideal and have
production of waste products. 100% atom economy.
e.g. CH2=CH2 + H2 CH3CH3

If a process does have a side, waste product the economics of the process can be improved by selling the
bi-product for other uses

N Goalby chemrevise.org 7
Using a gas syringe

Gas syringes can be used for a variety of experiments where the volume of a gas is measured, possibly to
work out moles of gas or to follow reaction rates.

The volume of a gas depends on pressure Make sure you dont leave
and temperature so when recording volume gaps in your diagram where
it is important to note down the temperature gas could escape
and pressure of the room.

Moles of gas can be calculated from gas

volume (and temperature and pressure)
using ideal gas equation PV = nRT

If drawing a gas syringe make

Potential errors in using a gas syringe
sure you draw it with some
gas escapes before bung inserted
measurement markings on the
syringe sticks
barrel to show measurements
some gases like carbon dioxide or sulphur
can be made.
dioxide are soluble in water so the true amount of
gas is not measured.

Making a solution
Weighing can be made more
Weigh required mass of solute in a weighing bottle.
accurate by weighing bottle again
after it has been emptied into the
Tip contents into a beaker and add100cm3 of distilled
beaker- or alternatively the weighing
water. Use a glass rod to stir to help dissolve the solid.
bottle could be washed and
washings added to the beaker.
Sometimes the substance may not dissolve well in cold
water so the beaker and its contents could be heated
gently until all the solid had dissolved.

Pour solution into a 250cm3 graduated flask via a funnel.

Rinse beaker and funnel and add washings from the
beaker and glass rod to the volumetric flask.
make up to the mark with distilled water using a Remember to fill so the bottom of the
dropping pipette for last few drops. meniscus sits on the line on the neck of
Invert flask several times to ensure uniform solution. the flask. With dark liquids like potassium
manganate it can be difficult to see the
meniscus.

N Goalby chemrevise.org 8