Scribd
Upload
124 views

Sampling Techniques

There are three main types of sampling techniques: natural sampling, flat top sampling, and ideal sampling. Natural sampling uses pulses of finite width to sample signals, flat top sampling samples the constant top portion of signals, and ideal sampling uses impulse trains. The sampling theorem states that a bandlimited signal with no frequencies above fm Hz can be sampled at a rate of at least 2fm Hz without aliasing. Aliasing occurs when the sampling rate is lower than the Nyquist rate and causes overlapping frequencies that distort the sampled signal.

Uploaded by

Pusp 220
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
124 views

Sampling Techniques

There are three main types of sampling techniques: natural sampling, flat top sampling, and ideal sampling. Natural sampling uses pulses of finite width to sample signals, flat top sampling samples the constant top portion of signals, and ideal sampling uses impulse trains. The sampling theorem states that a bandlimited signal with no frequencies above fm Hz can be sampled at a rate of at least 2fm Hz without aliasing. Aliasing occurs when the sampling rate is lower than the Nyquist rate and causes overlapping frequencies that distort the sampled signal.

Uploaded by

Pusp 220
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

http://blog.oureducation.

in/sampling-techniques/

Sampling Techniques
Their are two types of signal exist, continuous time signal and discrete time signals. Due to some
recent advancement in the digital signal technology over the last past few decades the light
weight, programmable and easily reproducible discrete time systems are available. Thus in spite
of having large number of continuous time signal we prefer processing of discrete signal. Thus
conversion of continuous to discrete time signal is required. This phenomena is obtained by
fundamental mathematical fool known as Sampling Theorem. Here in this post, we emphases
the concept of Sampling, Sampling theorem, Sampling techniques and its effects in details.

Sampling is the process of converting analog signal into a discrete signal or making an analog or
continuous signal to occur at a particular interval of time, this phenomena is known as sampling.

SAMPLING THEOREM:-

Sampling theorem states that a band limited signal having no frequency components higher than
fm hertz can be sampled if its sampling freq is equal to or greater than Nyquist rate.

Analog Signal Representation

Sampling Techniques

Their are basically three types of Sampling techniques, namely:


1. Natural Sampling
2. Flat top Sampling
3. Ideal Sampling

1. Natural Sampling:

Natural Sampling is a practical method of sampling in which pulse have finite width equal to
. Sampling is done in accordance with the carrier signal which is digital in nature.
Natural Sampled Waveform

Functional Diagram of Natural Sampler

With the help of functional diagram of a Natural sampler, a sampled signal g(t) is obtained by
multiplication of sampling function c(t) and the input signal x(t).

Spectrum of Natural Sampled Signal is given by:

G(f) = A/ Ts .[ sin c(n fs.) X(f-n fs)]

2. Flat Top Sampling:

Flat top sampling is like natural sampling i.e; practical in nature. In comparison to natural
sampling flat top sampling can be easily obtained. In this sampling techniques, the top of the
samples remains constant and is equal to the instantaneous value of the message signal x(t) at the
start of sampling process. Sample and hold circuit are used in this type of sampling.

Block Diagram and Waveform

Figure(a), shows functional diagram of a sample hold circuit which is used to generate
fat top samples.
Figure(b), shows the general waveform of the flat top samples. It can be observed that
only starting edge of the pulse represent the instantaneous value of the message signal
x(t).
Spectrum of Flat top Sampled Signal is given by: G(f) = fs .[ X(f-n fs). H(f)]

3. Ideal Sampling:

Ideal Sampling Wave form

Ideal Sampling is also known as Instantaneous sampling or Impulse Sampling.Train of impulse


is used as a carrier signal for ideal sampling. In this sampling technique the sampling function is
a train of impulses and the principle used is known as multiplication principle.

Here,
Figure (a), represent message signal or input signal or signal to be sampled.
Figure (b), represent the sampling function.
Figure (c), represent the resultant signal.

Spectrum of IdealSampled Signal is given by: G(f) = fs .[ X(f-n fs)]

NYQUIST RATE:

Nyquist rate is the rate at which sampling of a signal is done so that overlapping of frequency
does not take place. When the sampling rate become exactly equal to 2fm samples per second,
then the specific rate is known as Nyquist rate. It is also know aas the minimum sampling rate
and given by: fs =2fm

Effect of Under sampling: ALIASING

It is the effect in which overlapping of a frequency components takes place at the frequency
higher than Nyquist rate. Signal loss may occur due to aliasing effect. We can say that aliasing is
the phenomena in which a high frequency component in the frequency spectrum of a signal takes
identity of a lower frequency component in the same spectrum of the sampled signal.
Because of overlapping due to process of aliasing, sometimes it is not possible to overcome the
sampled signal x(t) from the sampled signal g(t) by applying the process of low pass filtering
since the spectral components in the overlap regions . hence this causes the signal to destroy.

The Effect of Aliasing can be reduced:

1) Pre alias filter must be used to limit band of frequency of the required signal fm Hz.
2) Sampling frequency fs must be selected such that fs > 2fm.

You might also like