User's Manual: Digital Camera

DIGITAL CAMERA
Users Manual
En
Trademark Information
Microsoft, Windows and Windows Vista are either registered trademarks or trademarks
of Microsoft Corporation in the United States and/or other countries.
Macintosh, Mac OS, and QuickTime are trademarks of Apple Inc.
Adobe and Acrobat are registered trademarks of Adobe Systems Inc.
The SD logo is a trademark of the SD Card Association.
PictBridge is a trademark.
All other trade names mentioned in this manual or the other documentation provided
with your Nikon product are trademarks or registered trademarks of their respective
holders.
Introduction
First Steps
A Basic Photography and Playback: Auto Mode
C Shooting Suited for the Scene
Taking Pictures of Smiling Faces

F
(Smart Portrait Mode)
Focusing on a Moving Subject in Subject

s
Tracking Mode
c More on Playback/In-Camera Editing
D Movies
Connecting to Televisions, Computers and Printers
d Shooting, Playback and Setup Menus
Technical Notes
i
For Your Safety
To prevent damage to your Nikon product or injury to yourself or to others, read
the following safety precautions in their entirety before using this equipment.
Keep these safety instructions where all those who use the product will read them.
The consequences that could result from failure to observe the precautions listed
in this section are indicated by the following symbol:
This icon marks warnings, information that should be read before using this Nikon
product, to prevent possible injury.
WARNINGS
Turn off in the event of Do not use the camera or
malfunction Charging AC Adapter in the
Should you notice smoke or an unusual presence of flammable gas
smell coming from the camera or Do not use electronic equipment in the
Charging AC Adapter, unplug the presence of flammable gas, as this
Charging AC Adapter and remove the could result in explosion or fire.
battery immediately, taking care to
Handle the camera strap with
avoid burns. Continued operation care
could result in injury. After removing or
Never place the strap around the neck
disconnecting the power source, take
of an infant or child.
the equipment to a Nikon-authorized
service representative for inspection. Keep out of reach of children
Particular care should be taken to
Do not disassemble
prevent infants from putting the
Touching the internal parts of the
battery or other small parts into their
camera or Charging AC Adapter could
mouths.
result in injury. Repairs should be
performed only by qualified
technicians. Should the camera or
Charging AC Adapter break open as the
result of a fall or other accident, take the
product to a Nikon-authorized service
representative for inspection, after
unplugging the product and/or
removing the battery.
ii
For Your Safety
Observe caution when Observe the following

handling the battery precautions when handling the
The battery may leak or explode if Charging AC Adapter
improperly handled. Observe the Keep dry. Failure to observe this
following precautions when handling precaution could result in fire or
the battery for use in this product: electric shock.
Before replacing the battery, turn the Dust on or near the metal parts of the
product off. If you are using the plug should be removed with a dry
Charging AC Adapter/AC adapter, be cloth. Continued use could result in
sure it is unplugged. fire.
Use only a Rechargeable Li-ion Battery Do not handle the plug or go near
EN-EL12 (supplied). Charge the battery the Charging AC Adapter during
inserting it into the camera and lightning storms. Failure to observe
connecting the Charging AC Adapter this precaution could result in
EH-68P/EH-68P (AR) (supplied). electric shock.
When inserting the battery, do not Do not damage, modify, forcibly tug
attempt to insert it upside down or or bend the USB cable, place it under
backwards. heavy objects, or expose it to heat or
Do not short or disassemble the flames. Should the insulation be
battery or attempt to remove or damaged and the wires become
break the battery insulation or casing. exposed, take it to a Nikon-
authorized service representative for
Do not expose the battery to flame
inspection. Failure to observe these
or to excessive heat.
precautions could result in fire or
Do not immerse in or expose to water.
electric shock.
Replace the terminal cover when
Do not handle the plug or Charging
transporting the battery. Do not
AC Adapter with wet hands. Failure
transport or store with metal objects
to observe this precaution could
such as necklaces or hairpins.
result in electric shock.
The battery is prone to leakage when
Do not use with travel converters or
fully discharged. To avoid damage to
adapters designed to convert from
the product, be sure to remove the
one voltage to another or with DC-
battery when no charge remains.
to-AC inverters. Failure to observe
Discontinue use immediately should this precaution could damage the
you notice any change in the battery, product or cause overheating or fire.
such as discoloration or deformation.
If liquid from the damaged battery
comes in contact with clothing or
skin, rinse immediately with plenty of
water.
iii
For Your Safety
Use appropriate cables Do not operate the flash with

When connecting cables to the input the flash window touching a
and output jacks, use only the cables person or object
provided or sold by Nikon for the Failure to observe this precaution could
purpose, to maintain compliance with result in burns or fire.
product regulations. Avoid contact with liquid
Handle moving parts with care crystal
Be careful that your fingers or other Should the monitor break, care should
objects are not pinched by the lens be taken to avoid injury caused by
cover or other moving parts. broken glass and to prevent liquid
crystal from the monitor touching the
CD-ROMs skin or entering the eyes or mouth.
The CD-ROMs supplied with this device
should not be played back on audio CD Turn the power off when using
equipment. Playing CD-ROMs on an inside an airplane or the
audio CD player could cause hearing hospital
loss or damage the equipment. Turn the power off while inside the
airplane during take off or landing.
Observe caution when using Follow the instructions of the hospital
the flash when using while in a hospital. The
Using the flash close to your subjects electromagnetic waves given out by
eyes could cause temporary visual this camera may disrupt the electronic
impairment. Particular care should be systems of the airplane or the
observed if photographing infants, instruments of the hospital.
when the flash should be no less than
1 m (3 ft. 4 in.) from the subject.
iv
Notices
Notice for Customers in the
U.S.A.
Federal Communications COOLPIX S640
Commission (FCC) Radio
Frequency Interference
Statement CAUTIONS
This equipment has been tested and Modifications
found to comply with the limits for a The FCC requires the user to be notified
Class B digital device, pursuant to Part that any changes or modifications
15 of the FCC rules. These limits are made to this device that are not
designed to provide reasonable expressly approved by Nikon
protection against harmful interference Corporation may void the users
in a residential installation. This authority to operate the equipment.
equipment generates, uses, and can
radiate radio frequency energy and, if Interface Cables
not installed and used in accordance Use the interface cables sold or
with the instructions, may cause provided by Nikon for your equipment.
harmful interference to radio Using other interface cables may
communications. However, there is no exceed the limits of Class B Part 15 of
guarantee that interference will not the FCC rules.
occur in a particular installation. If this
Notice for customers in the State of
equipment does cause harmful California
interference to radio or television
WARNING
reception, which can be determined by
turning the equipment off and on, the Handling the cord on this product will
user is encouraged to try to correct the expose you to lead, a chemical known
interference by one or more of the to the State of California to cause birth
following measures: defects or other reproductive harm.
Wash hands after handling.
Reorient or relocate the receiving
antenna. Nikon Inc.,
Increase the separation between the 1300 Walt Whitman Road
equipment and receiver. Melville, New York 11747-3064
Connect the equipment into an USA
outlet on a circuit different from that Tel: 631-547-4200
to which the receiver is connected.
Consult the dealer or an experienced
radio/television technician for help.
v
Notices
Notice for customers in Canada

CAUTION
This Class B digital apparatus complies
with Canadian ICES-003.
ATTENTION
Cet appareil numrique de la classe B
est conforme la norme NMB-003 du
Canada.
Notice for customers in Europe
This symbol indicates that this
product is to be collected
separately.
The following apply only to
users in European countries:
This product is designated for
separate collection at an appropriate
collection point. Do not dispose of as
household waste.
For more information, contact the
retailer or the local authorities in
charge of waste management.
This symbol on the battery
indicates that the battery is
to be collected separately.
The following apply only to
users in European countries:
All batteries, whether marked with
this symbol or not, are designated for
separate collection at an appropriate
collection point. Do not dispose of as
household waste.
For more information, contact the
retailer or the local authorities in
charge of waste management.
vi
Table of Contents
For Your Safety........................................................................................................................................ ii
WARNINGS.................................................................................................................................................................. ii
Notices ....................................................................................................................................................... v
Introduction ...........................................................................................................................................1
About This Manual ................................................................................................................................ 1
Information and Precautions............................................................................................................. 2
Parts of the Camera............................................................................................................................... 4
The Camera Body ...................................................................................................................................................4
The Monitor................................................................................................................................................................6
Basic Operations..................................................................................................................................... 8
The A (shooting mode) Button...................................................................................................................8
The c (playback) Button .................................................................................................................................9
The Rotary Multi Selector................................................................................................................................10
The d button ...................................................................................................................................................12
Switching Between Tabs.................................................................................................................................12
Help Displays..........................................................................................................................................................13
Pressing the Shutter-Release Button Halfway/All the Way Down ........................................13
Attaching the Camera Strap .........................................................................................................................13
First Steps ............................................................................................................................................. 14

Inserting the Battery ...........................................................................................................................14
Removing the Battery .......................................................................................................................................15
Charging the Battery ..........................................................................................................................16
Turning On and Off the Camera.................................................................................................................19
Setting Display Language, Date and Time .................................................................................20
Inserting Memory Cards ....................................................................................................................22
Removing Memory Cards...............................................................................................................................22
A Basic Photography and Playback: Auto Mode ................................................................. 24

Step 1 Turn the Camera On and Select A (Auto) Mode .......................................................24
Indicators Displayed in A (Auto) Mode ...............................................................................................25
Step 2 Frame a Picture .......................................................................................................................26
Using the Zoom....................................................................................................................................................27
Step 3 Focus and Shoot .....................................................................................................................28
Step 4 Viewing and Deleting Pictures ..........................................................................................30
Viewing Pictures (Playback Mode)............................................................................................................30
Deleting Pictures..................................................................................................................................................30
Using the Flash......................................................................................................................................32
Setting the Flash Mode....................................................................................................................................32
Taking Pictures with the Self-Timer...............................................................................................34
Macro Mode...........................................................................................................................................35 vii
Table of Contents
Exposure Compensation ...................................................................................................................36
C Shooting Suited for the Scene................................................................................................ 37

Shooting in Scene Mode ...................................................................................................................37
Choosing a Scene Mode .................................................................................................................................37
Features .....................................................................................................................................................................38
Shooting in the Scene Mode Selected by the Camera (Scene Auto Selector) .............45
Taking Pictures in Food Mode.....................................................................................................................47
Taking Pictures for a Panorama ..................................................................................................................49
F Taking Pictures of Smiling Faces (Smart Portrait Mode) .............................................. 51

Using Smart Portrait Mode...............................................................................................................51
Smart Portrait Menu...........................................................................................................................................52
s Focusing on a Moving Subject in Subject Tracking Mode........................................... 54

Subject Tracking Mode ......................................................................................................................54
Subject Tracking Menu ....................................................................................................................................56
c More on Playback/In-Camera Editing ................................................................................. 57

Viewing Multiple Pictures: Thumbnail Playback ......................................................................57
Calendar Display...................................................................................................................................................59
Taking a Closer Look: Playback Zoom ..........................................................................................60
Viewing Pictures by Date (List by Date Mode) ..........................................................................61
Selecting a Date in List by Date Mode ...................................................................................................61
Using List by Date Mode.................................................................................................................................62
List by Date Menu ...............................................................................................................................................63
Image Searching (Auto Sort Mode)...............................................................................................64
Displaying Pictures in the Auto Sort Mode .........................................................................................64
Auto Sort Mode ....................................................................................................................................................66
Auto Sort Menu ....................................................................................................................................................66
Voice Memos: Recording and Playback .......................................................................................67
Recording Voice Memos.................................................................................................................................67
Playing Voice Memos........................................................................................................................................68
Deleting Voice Memos.....................................................................................................................................68
Editing Pictures.....................................................................................................................................69
Enhancing Contrast and Saturation: Quick Retouch.....................................................................71
Enhancing Brightness and Contrast: D-Lighting..............................................................................72
Making Skin Appear Smoother: Skin Softening................................................................................73
Resizing Pictures: Small Picture...................................................................................................................74
Creating a Cropped Copy: Crop .................................................................................................................75
viii
Table of Contents
D Movies ............................................................................................................................................. 76
Recording Movies ................................................................................................................................76
The Movie Menu...................................................................................................................................77
D Selecting Movie Options..........................................................................................................................77
I Autofocus Mode ..........................................................................................................................................77
Movie Playback .....................................................................................................................................78
Deleting Movie Files...........................................................................................................................................78
Connecting to Televisions, Computers and Printers ............................................................ 79

Connecting to a TV..............................................................................................................................79
Connecting to a Computer...............................................................................................................80
Before Connecting the Camera..................................................................................................................80
Transferring Pictures from the Camera to a Computer ...............................................................81
Charging While Connecting to a Computer ......................................................................................84
Connecting to a Printer......................................................................................................................85
Connecting the Camera to a Printer........................................................................................................86
Printing Pictures One at a Time ..................................................................................................................88
Printing Multiple Pictures ...............................................................................................................................89
Creating a DPOF Print Order: Print Set.........................................................................................92
d Shooting, Playback and Setup Menus ............................................................................. 95

Shooting Options: The Shooting Menu .......................................................................................95
Displaying the Shooting Menu ..................................................................................................................95
A Image Mode ...................................................................................................................................................96
B White Balance................................................................................................................................................98
G Metering........................................................................................................................................................ 100
C Continuous.................................................................................................................................................. 101
E ISO Sensitivity ............................................................................................................................................ 102
F Color Options.............................................................................................................................................. 103
G AF-Area Mode ............................................................................................................................................ 104
I Autofocus Mode....................................................................................................................................... 108
Functions that Cannot be Applied Simultaneously.................................................................... 109
Playback Options: The Playback Menu ..................................................................................... 110
Displaying the Playback Menu................................................................................................................. 110
b Slide Show.................................................................................................................................................... 112
c Delete............................................................................................................................................................... 113
d Protect .......................................................................................................................................................... 113
f Rotate Image............................................................................................................................................... 114
h Copy................................................................................................................................................................. 115
Basic Camera Setup: The Setup Menu....................................................................................... 116
Displaying the Setup Menu........................................................................................................................ 117
ix
Table of Contents
a Menus ............................................................................................................................................................. 118

c Welcome Screen....................................................................................................................................... 119
d Date .................................................................................................................................................................. 120
e Monitor Settings ...................................................................................................................................... 123
f Date Imprint ................................................................................................................................................ 124
g Vibration Reduction............................................................................................................................... 125
U Motion Detection..................................................................................................................................... 126
h AF Assist........................................................................................................................................................ 127
u Digital Zoom .............................................................................................................................................. 127
i Sound Settings.......................................................................................................................................... 128
k Auto Off ......................................................................................................................................................... 128
l/m Format Memory/Format Card.................................................................................................. 129
n Language....................................................................................................................................................... 130
o Video Mode ................................................................................................................................................ 130
V Charge by Computer ............................................................................................................................. 131
d Blink Warning ............................................................................................................................................. 132
p Reset All.......................................................................................................................................................... 134
r Firmware Version .................................................................................................................................... 136
Technical Notes................................................................................................................................137
Optional Accessories ....................................................................................................................... 137
Approved Memory Cards ............................................................................................................................ 138
File and Folder Names..................................................................................................................... 139
Caring for the Camera ..................................................................................................................... 140
Cleaning ................................................................................................................................................................. 142
Storage .................................................................................................................................................................... 143
Error Messages................................................................................................................................... 144
Troubleshooting................................................................................................................................ 148
Specifications ..................................................................................................................................... 154
Supported Standards ..................................................................................................................................... 157
Index ...................................................................................................................................................... 158
x
Introduction
About This Manual
Thank you for your purchase of a Nikon COOLPIX S640 digital camera. This manual
was written to help you enjoy taking pictures with your Nikon digital camera. Read
this manual thoroughly before use, and keep it where all those who use the
product will read it.
Introduction
Symbols and Conventions
To make it easier to find the information you need, the following symbols and
conventions are used:
This icon marks cautions,

information that should be read This icon marks tips, additional
B before use, to prevent damage to D information that may be helpful
the camera. when using the camera.
This icon indicates that more

This icon marks notes,
information is available
C information that should be read A elsewhere in this manual or in
before using the camera.
the Quick Start Guide.
Notations
A Secure Digital (SD) memory card is referred to as a memory card.
The setting at the time of purchase is referred to as the default setting.
The names of menu items displayed in the camera monitor, and the names of
buttons or messages displayed in a computer monitor are indicated in bold
text.
Screen Samples
In this manual, images are sometimes omitted from monitor display samples so
that monitor indicators can be more clearly shown.
Illustrations and Screen Display
Illustrations and text displays shown in this manual may differ from actual display.
C Memory Cards
Pictures taken with this camera can be stored in the cameras internal memory or on removable
memory cards. If a memory card is inserted, all new pictures will be stored on the memory card and
delete, playback, and format operations will apply only to the pictures on the memory card. The
memory card must be removed before the internal memory can be formatted or used to store
pictures to, or delete, or view pictures.
1
Information and Precautions
Life-Long Learning
As part of Nikons Life-Long Learning commitment to ongoing product support and education,
continually updated information is available online at the following sites:
For users in the U.S.A.: http://www.nikonusa.com/
Introduction
For users in Europe and Africa: http://www.europe-nikon.com/support/

For users in Asia, Oceania, and the Middle East: http://www.nikon-asia.com/
Visit these sites to keep up-to-date with the latest product information, tips, answers to frequently
asked questions (FAQs), and general advice on digital imaging and photography. Additional
information may be available from the Nikon representative in your area. See the URL below for
contact information:
http://imaging.nikon.com/
Use Only Nikon Brand Electronic Accessories

Nikon COOLPIX cameras are designed to the highest standards and include complex electronic
circuitry. Only Nikon brand electronic accessories (including battery chargers, batteries, Charging AC
Adapter and AC adapters) certified by Nikon specifically for use with this Nikon digital camera are
engineered and proven to operate within the operational and safety requirements of this electronic
circuitry.
THE USE OF NON-NIKON ELECTRONIC ACCESSORIES COULD DAMAGE THE CAMERA AND MAY
VOID YOUR NIKON WARRANTY.
The use of third-party rechargeable Li-ion batteries not bearing the Nikon holographic seal could
interfere with normal operation of the camera or result in the batteries overheating, igniting,
rupturing, or leaking.
For more information about Nikon brand accessories, contact a local authorized Nikon dealer.
Holographic seal: Identifies this

device as an authentic Nikon product.
Before Taking Important Pictures

Before taking pictures on important occasions (such as at weddings or before taking the camera on
a trip), take a test shot to ensure that the camera is functioning normally. Nikon will not be held liable
for damages or lost profits that may result from product malfunction.
About the Manuals

No part of the manuals included with this product may be reproduced, transmitted, transcribed,
stored in a retrieval system, or translated into any language in any form, by any means, without
Nikons prior written permission.
Nikon reserves the right to change the specifications of the hardware and software described in
these manuals at any time and without prior notice.
Nikon will not be held liable for any damages resulting from the use of this product.
While every effort was made to ensure that the information in these manuals is accurate and
complete, we would appreciate it were you to bring any errors or omissions to the attention of the
Nikon representative in your area (address provided separately).
2
Information and Precautions
Notice Concerning Prohibition of Copying or Reproduction

Note that simply being in possession of material that was digitally copied or reproduced by means
of a scanner, digital camera or other device may be punishable by law.
Items prohibited by law from being copied or reproduced
Introduction
Do not copy or reproduce paper money, coins, securities, government bonds or local government
bonds, even if such copies or reproductions are stamped Sample. The copying or reproduction of
paper money, coins, or securities which are circulated in a foreign country is prohibited. Unless the
prior permission of the government was obtained, the copying or reproduction of unused postage
stamps or post cards issued by the government is prohibited.
The copying or reproduction of stamps issued by the government and of certified documents
stipulated by law is prohibited.
Cautions on certain copies and reproductions
The government has issued cautions on copies or reproductions of securities issued by private
companies (shares, bills, checks, gift certificates, etc.), commuter passes or coupon tickets, except
when a minimum of necessary copies are to be provided for business use by a company. Also, do
not copy or reproduce passports issued by the government, licenses issued by public agencies and
private groups, ID cards and tickets, such as passes and meal coupons.
Comply with copyright notices
The copying or reproduction of copyrighted creative works such as books, music, paintings,
woodcut prints, maps, drawings, movies and photographs is governed by national and international
copyright laws. Do not use this product for the purpose of making illegal copies or to infringe
copyright laws.
Disposing of Data Storage Devices

Please note that deleting images or formatting data storage devices such as memory cards or
built-in camera memory does not completely erase the original image data. Deleted files can
sometimes be recovered from discarded storage devices using commercially available software,
potentially resulting in the malicious use of personal image data. Ensuring the privacy of such data is
the users responsibility.
Before discarding a data storage device or transferring ownership to another person, erase all data
using commercial deletion software, or format the device and then completely refill it with images
containing no private information (for example, pictures of empty sky). Be sure to also replace any
pictures selected for the welcome screen (A 119). Care should be taken to avoid injury or damage
to property when physically destroying data storage devices.
3
Parts of the Camera
The Camera Body
1 2 3 4 5 6 7
Introduction
Lens cover closed
Zoom control..................................................27 4 Built-in microphone............................67, 76

f : Wide ....................................................27 5 Built-in flash......................................................32
1 g : Tele.......................................................27
h : Thumbnail playback..........57, 59 Self-timer lamp...............................................34
6
i : Playback zoom..............................60 AF-assist illuminator.................................127
j : Help .....................................................13 7 Speaker........................................................67, 78
2 Shutter-release button...................... 13, 28 8 Lens ......................................................... 142, 154
3
Power switch/Power-on lamp 9 Lens cover
....................................................................... 19, 128
4
Parts of the Camera
1 2 3 4
Introduction
14 15
12 13
5 6 7 8 9 10 11
16 17 18
1 Monitor ..........................................................6, 25 Power connector cover (for optional
10
2 Rotary multi selector...................................10 AC adapter connection) ........................137
3 A (shooting mode) button .................... 8 11 k (apply selection) button................... 10
Charge lamp ............................................17, 84 12 Eyelet for camera strap............................. 13

4
Flash lamp .........................................................33 13 c (playback) button ........................... 9, 30
5 Tripod socket 14 Cable connector............................79, 81, 86
6 d button........................ 12, 95, 110, 117 15 Connector cover............................79, 81, 86
7 l (delete) button.................30, 31, 68, 78 16 Battery latch .............................................14, 15
8 Cover latch................................................14, 22 17 Battery chamber ........................................... 14
Battery-chamber/ 18 Memory card slot ......................................... 22
9
memory card slot cover....................14, 22
5
Parts of the Camera
The Monitor
The following indicators may appear in the monitor during shooting and playback
(actual display varies with current camera settings).
Introduction
The indicators and photo info displayed during shooting and playback will turn off
after a few seconds (A 123).
Shooting
31 4 5 6
30 2 1 2 3
29 7
28 8 10 11
9
27
12
21 13
1600 1/250 F2.7 999
26 25 24 23 22
19 17 15
20 999 1m00 s 14
18 16 9999 1m00 s
a b
1 Shooting mode*............ 24, 37, 51, 54, 76 15 Internal memory indicator ..................... 25
2 Macro mode ....................................................35 16 Smile timer....................................................... 53
3 Zoom indicator ......................................27, 35 17 Aperture............................................................. 28
4 Focus indicator...............................................28 18 Skin softening................................................. 52
5 AE/AF-L indicator..........................................50 19 Shutter speed................................................. 28
6 Flash mode .......................................................32 20 ISO sensitivity........................................33, 102
7 Battery level indicator ................................24 21 Exposure compensation value............ 36
22 Focus area...............................................28, 104
8 Vibration reduction icon ...............25, 125
23 Focus area (for manual, center).........104
9 Motion detection icon....................25, 126
24 Focus area (Face Priority) ..............51, 104
10 Date not set indicator............... 120, 144
Focus area
11 Travel destination indicator.................120 25
(Subject Tracking mode) ......................... 54
12 Date imprint..................................................124 26 Center-weighted metering area ......100
Image mode ....................................................96 27 Color options................................................103
13
Movie options.................................................77
28 White balance mode ................................. 98
(a) Number of exposures remaining 29 Continuous shooting mode ...............101
14 (still pictures)...........................................24
(b) Movie length...........................................76 30 Self-timer indicator ..................................... 34
31 Blink proof ........................................................ 52
6 * Differs according to the current shooting mode. Refer to the sections on each mode for details.
Parts of the Camera
Introduction
Playback
5
1 2 3 4
15/11/2009 12:00 6
18 9999.JPG
17
15 16
14
13 12 7
11 999 999
8
10 9 999 999 1m0 0s
9999 9999 1m0 0s
a b
1 Date of recording .........................................20 9 Internal memory indicator ..................... 30

2 Time of recording.........................................20 10 Movie playback indicator........................ 78
3 Protect icon ...................................................113 11 List by date guide ........................................ 61
4 Volume indicator ..................................68, 78 12 Print-order icon ............................................. 92
5 Auto sort folder icon1 ...............................64 13 Small picture ................................................... 74
6 Battery level indicator ................................24 14 D-Lighting icon ............................................. 72
Image mode2 .................................................96 15 Quick retouch icon...................................... 71
7
Movie option2 ................................................78 16 Skin softening icon...................................... 73
(a) Current frame number/ 17 Voice memo indicator............................... 68
8 total number of frames ....................30
18 File number and type............................. 139
(b) Movie length...........................................78
1 The icons for auto sorting playback folder selected in playback will appear.
2 Differs according to the selected option.
7
Basic Operations
The A (shooting mode) Button
Press the A button in playback mode to change to
shooting mode.
Introduction
Press the A button in shooting mode to display

the shooting-mode selection menu and change
the shooting mode.
Shooting-mode Selection Menu

Use the rotary multi selector (A 10) to select the following shooting modes.
1 Auto mode
1. A Auto mode (A 24)
2 2. x Scene mode (A 37)*
3 3. F Smart portrait mode (A 51)
4 4. s Subject tracking mode (A 54)
5 5. D Movie mode (A 76)
* The icon displayed will differ according to the last chosen mode.
While the shooting-mode selection menu is displayed, press the A button to

continue shooting without changing the shooting mode.
8
Basic Operations
The c (playback) Button

Press the c button in shooting mode to change
to playback mode.
Introduction
Press the c button in playback mode to display
the playback-mode selection menu and change
the playback mode.
When the camera is off, holding down the c
button will turn the camera on in playback mode.
Playback-mode Selection Menu

Use the rotary multi selector (A 10) to select the following playback modes.
1 Play
1. c Playback mode (A 30)
2 2. F Auto sort mode (A 64)
3 3. C List by date mode (A 61)
While the playback-mode selection menu is displayed, press the c button to

return to the current playback mode without changing the mode.
9
Basic Operations
The Rotary Multi Selector

This section describes standard uses of the rotary multi selector to select modes,
select menu options and to apply selections.
Introduction
Shooting
Display m (flash mode) (A 32) menu
Rotate to select an item*

Display o
Display n (self-timer) (exposure compensation)
(A 34) menu (A 36) guide
Apply selection Flash mode
Display p (macro mode) (A 35) menu
* Options can also be chosen by pressing the rotary multi selector up or down.
Playback
15/11/2009 15:30
0004.JPG
Choose the previous Display histogram and

picture1 shooting information2
(except for movies)
4 4
100NIKON
0004.JPG
P
Choose the next 1/250 F2.7
+1.0
picture1 ISO 100
4 4
1 Subsequent or previous pictures can also be selected by rotating the rotary multi selector.
2 A histogram is a graph showing the distribution of tones in the image. The horizontal axis
corresponds to pixel brightness, with dark tones to the left and bright tones to the right. The
vertical axis shows the number of pixels.
The shooting information displayed includes the folder name, file name, shooting mode used,
shutter speed, aperture, exposure compensation, ISO sensitivity, and the current file number.
A will be displayed for shooting mode.
Press the k button again to return to full-frame playback.
10
Basic Operations
Menu Display
Choose the option above*
Introduction
Choose the option on the
right*/ Scene auto selector
Choose the option Proceed to the next screen
on the left*/ (apply selection) Shooting menu
Return display to Apply selection Image mode
White balance
the previous screen (advance display to the next Metering
screen) Continuous
ISO sensitivity
Choose the option below* Exit
* Options can also be chosen by rotating the rotary multi selector.
C Note on the Rotary Multi Selector

In this manual, up, down, left, and right presses of the rotary multi selector may be indicated with H,
I, J and K.
11
Basic Operations
The d button
Press the d button to display the menu for the
current mode.
Introduction
Use the rotary multi selector to navigate the menus

(A 11).
Select a tab on the left side of the monitor to
display the corresponding menu.
Press the d button again to exit the menu.
Displayed when the menu contains two or more pages
Upper tab: Shooting menu
Displays the menus for Image mode
the current mode used White balance
Metering
Lower tab:
Continuous
Displays the setup menu ISO sensitivity
Exit
Displayed when there are one or more menu options to follow
Displayed when Shooting menu AF area mode

there are previous Color options Face priority
menu options AF area mode Auto
Autofocus mode Manual
Center
Exit Exit
Select an item, then press the k button or Press the k button or the
the rotary multi selector K to proceed to rotary multi selector K to
the next set of options. apply selection.
Switching Between Tabs

Shooting menu Shooting menu Set up
Image mode Image mode Menus
White balance White balance Welcome screen
Metering Metering Date
Continuous Continuous Monitor settings
ISO sensitivity ISO sensitivity Date imprint
Exit Exit Exit
Press the rotary multi Press the rotary multi The chosen menu is
selector J to highlight selector H or I to choose displayed.
the tab. another tab, and press
either the k button or K.
12
Basic Operations
Help Displays
Rotate the zoom control to g (j) when M/L is displayed at the bottom of the
menu screen to view a description of the currently selected menu option.
Introduction
To return to the original menu, rotate the zoom control to g (j) again.
White balance
For accurate color reproduction,
choose a setting that matches
the light source.
Exit Back
Pressing the Shutter-Release Button Halfway/All the Way

Down
The camera features a two-stage shutter-release button. To set focus and
exposure, press the shutter-release button halfway, stopping when you feel
resistance. Focus and exposure lock while the shutter-release button is held in this
position. To release the shutter and take a picture, press the shutter-release button
the rest of the way down.
Do not use force when pressing the shutter-release button, as this may result in
camera shake and blurred pictures.
Press the shutter- Press the shutter-

release button halfway release button the
to set focus and rest of the way down
exposure. to shoot.
Attaching the Camera Strap
13
First Steps
Inserting the Battery
Insert a Rechargeable Li-ion Battery EN-EL12 (supplied) into the camera.
Charge the battery before first use or when the battery is running low (A 16).
1 Open the battery-chamber/memory card slot

cover.
Slide the cover latch toward Y (1) and open the
First Steps
battery-chamber/memory card slot cover (2).
2 Insert the battery.

Confirm that the positive (+) and negative ()
terminals are oriented correctly, as shown on the
label at the entrance of the battery chamber, and
insert the battery.
Use the edge of the battery to push the orange
battery latch in the direction indicated by the
arrow (1) and fully insert the battery (2). When
the battery is fully inserted, the battery latch will
lock it in place.
Battery latch
BInserting the Battery Correctly

Inserting the battery upside down or backwards
could damage the camera. Be sure to check the
battery is in the correct orientation.
3 Close the battery-chamber/memory card slot

cover.
Close the battery-chamber/memory card slot cover
(1), and slide the cover latch to the Z position (2).
14
Inserting the Battery
Removing the Battery

Turn the camera off (A 19) and confirm that the
power-on lamp and the monitor are off before opening
the battery-chamber/memory card slot cover.
To eject the battery, open the battery-chamber/
memory card slot cover and slide the orange battery
First Steps
latch in the direction shown (1). The battery can then
be removed by hand (2).
Note that the battery may become hot during use;
observe due caution when removing the battery.
B Notes on the Battery

Be sure to read and follow the warnings and cautions of For Your Safety (A ii) thoroughly
before using the battery.
Be sure to read and follow the warnings for The Battery (A 141) of the section Caring for the
Camera thoroughly before using the battery.
If the battery will not be used for an extended period, recharge it at least once every six months
and run it flat before returning it to storage.
15
Charging the Battery
Charge the supplied Rechargeable Li-ion Battery EN-EL12 inserted into the
camera, by connecting the supplied Charging AC Adapter EH-68P to the camera
via the supplied USB Cable UC-E6, and then plugging the Charging AC Adapter
into an electrical outlet.
1 Prepare the Charging AC Adapter

EH-68P.
First Steps
If a plug adapter* is included, attach the

plug adapter to the plug on the Charging
AC Adapter. Push the plug adapter firmly
until it is securely held in place. Once the
two are connected, attempting to forcibly
remove the plug adapter could damage the
product.
* The shape of the plug adapter varies
according to the country or region in which the camera was purchased.
For Customers in Argentina
If the camera was purchased in Argentina, the shape of
the Charging AC Adapter EH-68P (AR) differs from that
supplied in other countries, and a plug adapter is not
included. Proceed to step 2.
EH-68P (AR)
2 Be sure that the power-on lamp and the monitor are off.
Be sure to insert the battery into the camera (A 14) and turn off the camera (A 19).
3 Use the supplied USB cable to connect the Charging AC Adapter to the camera.
B Connecting the Cable

When connecting the cable, be sure that the camera connector is properly oriented. Do not use
force when connecting the cable to the camera. When disconnecting the cable, do not pull the
connector at an angle.
16
4 Plug the Charging AC Adapter into an

electrical outlet.
The cameras charge lamp slowly blinks green to
indicate that the battery is charging.
About 4 hours are required to charge a fully exhausted
battery.
First Steps
The following chart explains charge lamp
status when the camera is plugged into the
electrical outlet.
Charge lamp Description

Blinks slowly (green) Battery charging.
Not charging. When the charge lamp changes from slow
Off
blinking (green) to off, charging is complete.
Flickers (green) Operating temperature range exceeded. Charge the
battery indoors with an ambient temperature of 5 C to
35 C (41 F to 95 F).
A USB cable is not correctly connected, nor is a Charging
AC Adapter correctly plugged, or the battery is faulty.
Disconnect the USB cable or unplug the Charging AC
Adapter and correctly connect it again, or change the
battery.
5 Disconnect the Charging AC Adapter from the electrical outlet and

then disconnect the USB cable.
17
B Notes on Charging AC Adapter

Do not use the Charging AC Adapter EH-68P with any device that is not supported.
Be sure to read and follow the warnings and cautions of For Your Safety (A ii) thoroughly
before using the EH-68P.
Be sure to read and follow the warnings for The Battery (A 141) thoroughly before using the
battery.
The EH-68P is compatible with AC 100-240 V, 50/60 Hz electrical outlets. When using in other
First Steps
countries, use a third-party plug adapter as necessary. For more information about plug adapters,
consult your travel agency.
The Charging AC Adapter EH-68P is for charging the battery inserted into the camera. When the
Charging AC Adapter is connected to the camera, the camera cannot be turned on.
Do not, under any circumstances, use a Charging AC Adapter other than the EH-68P or a USB AC
adapter. Failure to observe this precaution could result in overheating or in damage to the camera.
C Note on AC Power Supply

If the AC Adapter EH-62F (available separately; A 137) is used, power is supplied to the camera
from an electrical outlet and taking pictures and playing back pictures are available with this
camera.
Do not, under any circumstances, use any AC adapter other than the EH-62F. Failure to observe
this precaution could result in overheating or in damage to the camera.
D Charging Using Computer or Battery Charger

Connecting the COOLPIX S640 to a computer also charges the Rechargeable Li-ion Battery EN-
EL12 (A 131).
Rechargeable Li-ion Battery EN-EL12 can also be charged using the Battery Charger MH-65
(available separately; A 137).
18
Turning On and Off the Camera

Press the power switch to turn on the camera. The
power-on lamp (green) will light for a moment and the
monitor will turn on.
Press the power switch again to turn off the camera.
When the camera turns off, both the power-on lamp
First Steps
and monitor will turn off.
When the camera is off, holding down the c button will turn the camera on in
playback mode (A 30).
C Auto Power Off in Shooting Mode (Standby Mode)

If no operations are performed for about a minute (default setting), the monitor will turn off
automatically and the camera will enter standby mode. If no operations are performed for another
three minutes, the camera will turn off automatically (the auto off function).
If the monitor is off in standby mode (the power-on lamp is blinking), press the power switch or
the shutter-release button to reactivate it.
The time allowed to elapse before the camera enters standby mode can be changed from the
Auto off option (A 128) in the setup menu (A 116).
19
Setting Display Language, Date and Time
A language-selection dialog is displayed the first time the camera is turned on.
1 Press the power switch to turn on the camera.

The power-on lamp (green) will light for a moment and
the monitor will turn on.
First Steps
2 Use the rotary multi selector to

choose the desired language and
press the k button.
For information on using the rotary multi
selector, see The Rotary Multi Selector
(A 10).
3 Choose Yes and press the k button. Date

If No is selected, the date and time will not be set. Set time and date?
No
Yes
Cancel
4 Press the rotary multi selector J or K to

select your home time zone (city name) London
(A 122) and press the k button. Casablanca
Back
D Daylight Saving Time

If daylight saving time is in effect, press the rotary multi selector H
in the time zone selection screen displayed in step 4 to turn on the
London
daylight saving time option.
Casablanca
When the daylight saving time option is enabled, W is displayed at
the top of the monitor. To turn off the daylight saving time option,
press I.
Back
20
Setting Display Language, Date and Time
5 Edit the date. Date

Rotate the rotary multi selector, or press H or I to
D M Y
edit the highlighted item.
01 01 2009
Press K to move the highlight in the following order:
D (day) M (month) Y (year) hour minute 00 00
DMY (the order in which the day, month, and year Edit
First Steps
are displayed)
Press J to return to the previous item.
6 Choose the order in which the day, month Date

and year are displayed and press the k
D M Y
button or K.
15 11 2009
The settings are applied and monitor display exits to
shooting mode. 15 10
Edit
D Changing the Date and Time

Select Date from the Date (A 120) in the setup menu (A 116) to change the current date and
time and follow the procedure described in step 5 above.
Select Time zone from the Date in the setup menu to change the time zone and daylight saving
time settings (A 120).
21
Inserting Memory Cards
Image, sound, and movie files are stored in the cameras internal memory (approx.
45 MB) or on removable memory cards (available separately) (A 138).
If a memory card is inserted in the camera, data are automatically stored
on the memory card, and data recorded to the memory card can be played
back, deleted, or transferred. Remove the memory card to store data in
the internal memory, or play back, delete, or transfer data from the
First Steps
internal memory.
1 Confirm that the power-on lamp and the

monitor are off and open the battery-
chamber/memory card slot cover.
Be sure to turn off the camera before opening the
battery-chamber/memory card slot cover.
2 Insert the memory card.

Insert the memory card in the correct
orientation (as shown on the right) until it
clicks into place.
Close the battery-chamber/memory card
slot cover after inserting the memory card.
B Inserting the Memory Card Correctly

Inserting the memory card upside down or backwards
could damage the camera or the memory card. Be sure
to check the memory card is in the correct orientation.
Removing Memory Cards

Before removing memory cards, turn the camera off
and confirm that the power-on lamp and the monitor
are off.
Open the battery-chamber/memory card slot cover
and press the card in (1) gently to partially eject the
card. The card can then be removed by hand (2).
22
Inserting Memory Cards
B Formatting a Memory Card

If the message at the right is displayed when the camera is turned Card is not formatted.
on, the memory card must be formatted before use. Note that Format card?
formatting (A 129) permanently deletes all data on the
memory card. Be sure to make copies of any pictures you wish to No
keep before formatting the memory card. Yes
To format the memory card, use the rotary multi selector to choose
First Steps
Yes and press the k button. When the confirmation dialog is
displayed, choose Format and press the k button to start formatting.
Do not turn the camera off or open the battery-chamber/memory card slot cover until formatting
is complete.
When you insert a memory card that has been used in another device into this camera for the first
time, be sure to format it (A 129) with this camera.
B The Write Protect Switch

Memory cards are equipped with a write protect switch.
Write protect switch
When this switch is in the lock position, data cannot be
written to, or deleted from, the memory card. If the switch
is in the lock position, unlock it by sliding the switch to the
write position to record or delete pictures, or to format
the memory card.
B Memory Cards
Use only Secure Digital memory cards.
Do not perform the following during formatting, while data is being written to or deleted from the
memory card, or during data transfer to a computer. Failure to observe this precaution could result
in the loss of data or in damage to the camera or memory card:
- Eject the memory card
- Remove the battery
- Turn off the camera
- Disconnect the AC adapter
Do not use a computer to format the memory card.
Do not disassemble or modify.
Do not drop, bend, or expose to water or strong physical shock.
Do not touch the metal terminals with your fingers or metal objects.
Do not affix labels or stickers to the memory card.
Do not leave in direct sunlight, closed vehicles or areas exposed to high temperatures.
Do not expose to humidity, dust, or to corrosive gases.
23
Basic Photography and Playback: Auto Mode
Step 1 Turn the Camera On and Select A (Auto) Mode
This section describes how to take pictures in A (auto) mode, an automatic,
point-and-shoot mode recommended for first-time users of digital cameras.
1 Press the power switch to turn on the camera.

The power-on lamp (green) will light for a moment and
the monitor will turn on. The lens will also extend.
Proceed to step 4 when A is displayed on the
monitor.
2 Press the A button to display the

shooting-mode selection menu.
3 Use the rotary multi selector to choose A and Auto mode

press the k button.
The camera enters A (auto) mode.
4 Check the battery level and number of Battery level indicator

exposures remaining in the monitor.
Battery Level
Monitor Description
NO INDICATOR Battery fully charged.
Battery level low; prepare to charge
B 13
or replace the battery.
N Number of exposures
Cannot shoot. Recharge or replace
Battery remaining
with a fully-charged battery.
exhausted.
Number of Exposures Remaining
The number of exposures remaining will be displayed.
The number of pictures that can be stored depends on the remaining capacity of the
internal memory or memory card and the image mode setting (A 97).
24
Step 1 Turn the Camera On and Select A (Auto) Mode
Indicators Displayed in A (Auto) Mode

Vibration reduction icon
Reduces the effects of
camera shake.
Shooting mode
A displayed in A
(auto) mode. Motion detection icon
Reduces the effects of
subject movement and
camera shake.
13

Internal memory indicator Image mode
Pictures will be recorded to internal memory The combination of image size and
(approx. 45 MB). When a memory card is image quality (compression) is
inserted, C is not displayed and pictures will displayed. The default setting is L
be recorded to the memory card. Normal (4,0003,000).
The indicators and photo info displayed during shooting and playback will turn off
after a few seconds (A 123).
If the monitor is turned off in standby mode to save power, press the power switch
or the shutter-release button to reactivate it (A 128).
D Functions Available in A (Auto) Mode

In A (auto) mode, macro mode (A 35) and exposure compensation (A 36) can be applied and
pictures can be taken using the flash mode (A 32) and self-timer (A 34). Pressing the d button
in A (auto) mode allows you to specify settings for all shooting menu options (A 95).
D Vibration Reduction and Motion Detection

See Vibration reduction (A 125) or Motion detection (A 126) in the setup menu (A 116)
for more information.
Set vibration reduction to Off when using a tripod to stabilize the camera during shooting.
25
Step 2 Frame a Picture
1 Ready the camera.

Hold the camera steadily in both hands. Keep your
fingers, hair, strap and other objects away from the
lens, flash, AF-assist illuminator, microphone and
speaker.
When taking pictures in the portrait (vertical)

orientation, turn the camera so that the built-in flash is
above the lens.
2 Frame the picture.

Position the main subject near the center of the
monitor.
13
26
Step 2 Frame a Picture
Using the Zoom

Rotate the zoom control to activate optical zoom. Zoom out Zoom in
Rotate in the direction of g to zoom in on the subject.
Or rotate in the direction of f to have a wider view.
A zoom indicator is displayed at the top of the monitor
when the zoom control is rotated.

Optical Digital
zoom zoom
Digital Zoom
When the camera is already at the maximum optical zoom magnification, rotating
the zoom control in the g direction will trigger digital zoom. The subject can be
magnified up to 4 of the maximum optical zoom ratio.
When using digital zoom, the camera will focus on the center of the frame and the
focus area will not be displayed.
Maximum optical zoom Digital zoom is in effect.
C Digital Zoom and Interpolation

Unlike optical zoom, digital zoom uses a digital imaging process known as interpolation to magnify
images, resulting in slight deterioration of picture quality according to the image mode (A 96) and
digital zoom magnification.
Interpolation is applied at zoom positions beyond V. When zoom is increased beyond the V
position, interpolation is initiated and the zoom indicator turns yellow to indicate that interpolation
is being applied.
The position of V moves to the right as image size decreases, allowing for confirmation of the
zoom positions at which shooting without interpolation is possible at the current image mode
setting.
When the image size is small

Digital zoom can be disabled from the Digital zoom option (A 127) in the setup menu
(A 116).
27
Step 3 Focus and Shoot
1 Press the shutter-release button halfway.
The camera focuses when the shutter-release button is

pressed halfway (A 13).
Camera automatically selects the focus area (up to nine
areas) containing the subject closest to the camera.
When the subject is in focus, the focus area (active
focus area) glows green.

13
1/250 F2.7
Shutter speed Aperture
When using digital zoom, the camera focuses on the subject in the center of the
frame, and the focus area is not displayed. When the subject is in focus, the focus
indicator (A 6) glows green.
Press the shutter-release button halfway to display the shutter speed and aperture.
Focus and exposure remain locked while the shutter-release button is pressed
halfway.
When the shutter-release button is pressed halfway and the camera is unable to
focus, the focus area or focus indicator blinks red. Change the composition and press
the shutter-release button halfway again.
2 Press the shutter-release button the rest of

the way down.
The shutter will be released and the picture will be
recorded to the memory card or internal memory.
28
Step 3 Focus and Shoot
B During Recording
While pictures are being recorded, the number of exposures remaining display will blink. Do not
open the battery-chamber/memory card slot cover while pictures are being recorded.
Cutting power or removing the memory card in these circumstances could result in loss of data or in
damage to the camera or card.
B Autofocus
Autofocus may not perform as expected in the following situations. In some rare cases, the subject
may not be in focus despite the fact that the active focus area, or focus indicator, glows green:
Subject is very dark

Objects of sharply differing brightness are included in the scene (e.g. the sun is behind the subject
and is in deep shadow)
No contrast between the subject and surroundings (e.g. when the subject is standing in front of a
white wall, wearing a white shirt)
Several objects are at different distances from the camera (e.g. the subject is inside a cage)
Subject is moving rapidly
In the situations noted above, try pressing the shutter-release button halfway to refocus several
times, or focus on another subject and use focus lock (A 105). When using focus lock, be sure that
the distance between the camera and the subject with which focus was locked is the same as that
for the actual subject.
D AF-assist Illuminator and Flash

If the subject is poorly lit, the AF-assist illuminator (A 127) may light when the shutter-release
button is pressed halfway and the flash (A 32) may fire when the shutter-release button is pressed
all the way down.
29
Step 4 Viewing and Deleting Pictures
Viewing Pictures (Playback Mode)
Press the c (playback) button. A (shooting mode) button

The last picture shot will be displayed in full-frame
playback mode.
Rotate the rotary multi selector, or press H, I, J
or K, to view additional pictures (A 10).
Pictures may be displayed briefly at low resolution
while being read from the memory card or internal Rotary multi c (Playback)
memory. selector button

Press the A button or the shutter-release button
to return to shooting mode.
When C is displayed, pictures stored in the internal
15/11/2009 15:30
memory will be displayed. When a memory card is inserted, 0004.JPG
C is not displayed and pictures stored on the memory card
will be displayed.
4 4
Internal memory indicator
Deleting Pictures
1 Press the l button to delete the

picture currently displayed in the
monitor.
2 Use the rotary multi selector to choose Yes

and press the k button. Erase 1 image?
Deleted pictures cannot be recovered.
To exit without deleting the picture, choose No and
press the k button. No
Yes
30
Step 4 Viewing and Deleting Pictures
C Options Available in Playback Mode

The following options are available in full-frame playback mode.
Option Use Description A

Enlarge the view of the picture currently
displayed in the monitor, up to about 10.
Playback zoom g (i) 60
Press the k button to return to full-frame
playback mode.
Thumbnail display/ Display images by 4, 9 or 16 picture
f (h) 57, 59
Calendar display thumbnails, or display the calendar.
Display the histogram and the shooting

Display shooting
k information. Press the k button to return to 10
information
full-frame playback.
Display the playback-mode selection menu,
Change playback mode c and switch to List by Date mode or Auto sort 61, 64
playback mode.
A
Switch to shooting Press the A button or the shutter-release
30
mode button.
C Pressing the c Button to Turn on the Camera

When the camera is off, holding down the c button will turn the camera on in playback mode. The
lens will not extend.
C Viewing Pictures
Pictures stored in the internal memory can only be viewed if no memory card is inserted.
Pictures that were shot using Face Priority (A 106) will be rotated automatically when displayed
in full-frame playback mode according to the orientation of the face (excluding pictures that were
shot using Continuous, BSS and Multi-shot 16 (A 101)).
If the monitor is turned off in standby mode to save power, press the power switch or the shutter-
release button to reactivate it (A 128).
C Deleting the Last Picture Taken While in Shooting Mode
In shooting mode, press the l button to delete the last picture
shot.
Erase 1 image?
No
Yes
D Deleting Multiple Pictures

Choose Delete (A 113) from the Playback menu (A 110), List by Date menu (A 63) or Auto sort
menu (A 66) to delete multiple pictures.
31
Using the Flash
The flash has a range of about 0.5 to 8.0 m (1 ft. 8 in. to 26 ft.) when the camera is
zoomed out all the way. With maximum optical zoom applied, the range is about
0.5 to 4.0 m (1 ft. 8 in. to 13 ft.) (when ISO sensitivity is set to auto). The following
flash modes are available.
U Auto
Flash fires automatically when lighting is poor.
V Auto with red-eye reduction
Reduces red-eye in portraits (A 33).
W Off
Flash will not fire even when lighting is poor.
X Fill flash
Flash fires whenever a picture is taken. Use to fill-in (illuminate) shadows and
backlit subjects.
Y Slow sync
Auto is combined with slow shutter speed.
Suitable for taking portrait images with the night landscape as the background.
Flash illuminates main subject; slow shutter speeds are used to capture background
at night or under dim light.
Setting the Flash Mode

1 Press X (flash mode).
The flash mode menu is displayed.
2 Use the rotary multi selector to choose the

desired flash mode and press the k button.
The icon for the selected flash mode is displayed at the
top of the monitor.
D will disappear after a few seconds regardless of
the current Photo info setting (A 123). Flash mode
If a setting is not applied by pressing the k button
within a few seconds, the selection will be cancelled.
32
Using the Flash
B Shooting When Lighting is Poor and When the Flash is Disabled (W)
Use of a tripod is recommended to stabilize the camera during shooting and avoid the effects of
camera shake. Set Vibration reduction (A 125) in the setup menu (A 116) to Off when using
a tripod to stabilize the camera during shooting.
The E indicator is displayed when the camera automatically increases sensitivity. Pictures taken
when E is displayed may be slightly mottled.
When E is displayed and higher sensitivity is applied, noise reduction may be automatically
applied as pictures are recorded. This will result in increased recording times.
B Note on Using the Flash

Reflections from dust particles in the air may appear as bright spots in pictures. To reduce these
reflections, set the flash to W (off).
C The Flash Lamp

The flash lamp indicates the flash status when the
shutter-release button is pressed halfway down.
On : Flash will fire when picture is shot.
Blinks : Flash is charging. Wait a few seconds and try again.
Off : Flash will not fire when picture is shot.
If the battery is low, the monitor display will turn off, and
remain off, until the flash is fully charged.
C Flash Setting
The default flash mode setting varies with shooting mode.
A (auto): U auto.
Scene mode: setting varies for different scene modes (A 38-44).
F (smart portrait) mode: set to W off (when Blink Proof is on), U auto (when Blink Proof is off) (A 53)
Flash cannot be used simultaneously with certain features (A 109).
s (subject tracking): W off
The flash mode setting applied in A (auto) mode is stored in the cameras memory even after the
camera is turned off, and reapplied the next time A (auto) mode is selected.
C Red-eye Reduction
This camera uses Advanced Red-eye Reduction (In-Camera Red-Eye Fix).
Pre-flashes are fired repeatedly at low intensity before the main flash, reducing the red-eye effect.
If the camera detects red-eye when a picture is taken, Nikons own In-Camera Red-Eye Fix
processes the image before it is recorded.
Note the following when taking pictures:
Because pre-flashes are fired, there is a slight lag between when the shutter-release button is
pressed and when the picture is shot. This mode is not recommended when a quick shutter
response is required.
The time required to save the picture increases slightly.
Advanced red-eye reduction may not produce the desired results in some situations.
In extremely rare instances, areas not subject to red-eye may be affected by advanced red-eye
reduction processing; in these cases, choose another mode and try again.
33
Taking Pictures with the Self-Timer
The camera is equipped with a ten-second and two-second timer for self-portraits.
When using the self-timer, use of a tripod is recommended. Set Vibration
reduction (A 125) to Off in the setup menu (A 116) when using a tripod.
1 Press n (self-timer).
The self-timer menu is displayed.
2 Use the rotary multi selector to choose 10s or

2s and press the k button. 10s
2s
10s (ten seconds): suited for important occasions (such
as weddings)
2s (two seconds): suited for preventing camera shake
The mode selected for self-timer is displayed. Self-timer
3 Frame the picture and press the

shutter-release button halfway.
Focus and exposure will be set.
1/250 F2.7
4 Press the shutter-release button the

rest of the way down. 9
The self-timer starts, and the number of
seconds remaining the shutter is released is
displayed in the monitor. The self-timer lamp
will blink. The lamp stops blinking one 1/250 F2.7
second before the picture is taken and
remains lit until the shutter is released.
When the shutter is released, the self-timer
turns OFF.
To stop the timer before a picture is taken,
press the shutter-release button again.
34
Macro Mode
Macro mode is used for taking pictures of objects as close as 2 cm (0.8 in.). Note that
the flash may be unable to light the entire subject at distances of less than 50 cm
(1 ft. 7 in.).
1 Press p (macro mode).

The macro mode menu is displayed.

2 Use the rotary multi selector to choose ON
and press the k button.
The macro mode icon (F) is displayed.
Macro mode
3 Use the zoom control and frame the picture.

The closest distance at which the camera can focus
varies depending on the zoom position. At the zoom
position (wide angle position before the G icon)
where the F icon and zoom display glow green, the
camera can focus on subjects as close as 4 cm (1.6 in.)
from the lens. At the wide-most zoom position, the camera can focus on subjects as
close as 2 cm (0.8 in.) from the lens.
C Autofocus
When using A (auto) mode, if Autofocus mode (A 108) is set to Full-time AF, the camera will
continually focus until the focus is locked when you press the shutter-release button halfway. A
sound will be heard while the camera focuses.
When using other shooting modes, Full-time AF is turned on automatically when macro mode is
turned on.
C The Macro Mode Setting

The macro mode setting applied in A (auto) mode is stored in the cameras memory even after the
camera is turned off, and reapplied the next time A (auto) mode is selected.
35
Exposure Compensation
Exposure compensation is used to alter the exposure from the value suggested by
the camera to make pictures brighter or darker.
1 Press o (exposure compensation).

The exposure compensation guide and histogram are
displayed.
2 Use the rotary multi selector to adjust the

exposure and press the k button.

When the subject is too dark: adjust the exposure
compensation to + side.
When the subject is too bright: adjust the exposure
compensation to side.
Exposure compensation
Exposure compensation can be set to values between
2.0 and +2.0 EV. Histogram
When set to any value other than 0.0, the value is displayed with the H icon in the monitor.
3 Press the shutter-release button to take the

picture.
To turn off exposure compensation, repeat from step 1
and set the value to 0.0, then press k.
13
C Exposure Compensation Value
The exposure compensation value applied in A (auto) mode is stored in the cameras memory even
after the camera is turned off, and reapplied the next time A (auto) mode is selected.
D Using Exposure Compensation
The camera tends to lower exposure when the frame is dominated by brightly lit objects (for
example, sunlit expanses of water, sand, or snow) or when the background is much brighter than
the main subject.
Negative compensation may be called for when large areas of the frame contain very dark objects (for
example, a swath of dark green leaves) or when the background is much darker than the main subject.
D Using the Histogram
A histogram is a graph showing the distribution of tones in the image.
The horizontal axis corresponds to pixel brightness, with dark tones to the left and bright tones to
the right. The vertical axis shows the number of pixels.
Increasing exposure compensation shifts tone distribution to the right, and decreasing it shifts
tone distribution to the left.
Use as a guide when using exposure compensation and shooting without the flash.
36
Shooting Suited for the Scene
Shooting in Scene Mode
Camera settings are automatically optimized for the selected subject type. The
following scene modes are available.
x Scene auto selector b Portrait c Landscape d Sports
e Night portrait f Party/indoor g Beach/snow h Sunset
i Dusk/dawn j Night landscape k Close-up u Food
l Museum m Fireworks show n Copy o Backlight
p Panorama assist
Choosing a Scene Mode
1 Display the shooting-mode

selection menu by pressing the A
button in shooting mode, and use
the rotary multi selector to choose
a scene icon.
Scene auto selector
The icon for the scene mode that was
chosen previously will be displayed. The
default setting is x (Scene auto selector).
2 Press K, choose a scene and press the k

button.
The screen changes to the shooting mode screen.
Features A 38
Beach/snow
3 Frame the subject and take the

picture.
1/250 F2.7
C Image Mode
You can change the Image mode setting (A 96) by pressing the d button to display the C
(scene) menu.
Changes made to the image mode setting apply to all shooting modes (except for the movie mode).
37
Features
The following icons are used for descriptions in this section: X = flash mode
(A 32), n = self-timer (A 34), p = macro mode (A 35), o = exposure
compensation (A 36).
x Scene auto selector Q
By simply framing a picture, the camera automatically selects the optimum scene mode.
See Shooting in the Scene Mode Selected by the Camera (Scene Auto Selector) (A 45)
for more information.
X U1 n Off2 p Off3 o 0.02

1 The camera automatically chooses the optimum flash mode setting for the scene mode it has
selected. W (off) can be selected.
2 Other settings can be selected.

3 Changes to On when the camera selects close-up scene mode.
b Portrait Q
Use this mode for taking portraits in which the main subject
stands out clearly.
If the camera detects a face, it focuses on the face (Shooting
with Face Priority A 106).
If the camera detects multiple faces, the camera focuses on
the face closest to the camera.
The skin softening feature can make the subjects (up to three people) skin appear
smoother, then record the image (A 52).
If no face is recognized, the camera will focus on the subject in the center of the frame.
Digital zoom is not available.
X V* n Off* p Off o 0.0*

* Other settings can be selected.
c Landscape Q
Use this mode for vivid landscapes and cityscapes.
Camera focuses at infinity. When the shutter-release button
is pressed halfway, the focus area or focus indicator (A 6)
always lights green; however, focus may not be set for near
subjects, while the camera focuses at infinity.
AF-assist illuminator (A 127) does not light.
X W n Off* p Off o 0.0*

Q: Indicates pictures shot in this scene mode are processed automatically to reduce noise, and
therefore may take more time to save.
38
d Sports
Use this mode for dynamic action shots that freeze the action
in a single shot and record motion in a series of pictures. With
continuous shooting, instantaneous movements in moving
subjects can be captured clearly.
The camera focuses on the subject in the center of the
frame. The camera focuses continuously until focus is
locked by pressing the shutter-release button halfway.
While the shutter-release button is held down, pictures are taken at rate of up to about
0.8 frames per second (fps) when image mode is set to I Normal (4000). Shooting
ends when the shutter-release button is released, or ten shots have been taken with the
shutter-release button held down.
Focus, exposure compensation, and white balance are fixed at the values determined
with the first shot in each series.

The maximum frame rate with continuous shooting may vary, depending upon the
current image mode and the type of memory card used.
X W n Off p Off o 0.0*

e Night portrait O
Use this mode for portraits of a human subject shot in front of
background lighting at night. Flash is used to illuminate the
subject while maintaining the mood of the background.
If the camera detects a face, it focuses on the face (Shooting
with Face Priority A 106).
If the camera detects multiple faces, the camera focuses on
the face closest to the camera.
The skin softening feature can make the subjects (up to three people) skin appear
smoother, then record the image (A 52).
If no face is recognized, the camera will focus on the subject in the center of the frame.
X V1 n Off2 p Off o 0.02

1 Fixed to slow sync with red-eye reduction.
O: Indicates a tripod is recommended when using this scene mode. Turn Vibration reduction
(A 125) to Off when using a tripod.
39
f Party/indoor Q
Suitable for taking pictures in parties. Captures the effects of
candlelight and other indoor background lighting.
frame.
Hold the camera steadily as pictures are easily affected by
camera shake. When shooting under low lighting, use of a
tripod is recommended. Set Vibration reduction (A 125) to Off when using a tripod
to stabilize the camera during shooting.
X V1 n Off2 p Off o 0.02
1 Fill flash with slow sync and red-eye reduction. Other settings can be selected.
g Beach/snow Q
Captures the brightness of such subjects as snowfields,
beaches, or sunlit expanses of water.
frame.
X U* n Off* p Off* o 0.0*

h Sunset OQ
Preserves the deep hues seen in sunsets and sunrises.
Camera focuses at infinity. When the shutter-release button is
pressed halfway, the focus area or focus indicator (A 6)

40
i Dusk/dawn OQ
Preserves the colors seen in the weak natural light before
sunrise or after sunset.

j Night landscape O

Use this mode to capture night landscapes. Slow shutter
speeds are used to produce stunning night landscapes.
Camera focuses at infinity. When the shutter-release button
is pressed halfway, the focus area or focus indicator (A 6)

41
k Close-up Q
Use to photograph flowers, insects and other small objects at
close range.
Macro mode (A 35) will be turned on and the camera
automatically zooms to the position at the closest distance
at which the camera can focus.
The closest distance at which the camera can focus varies
depending on the zoom position. At the zoom position (wide angle position before the
G icon) where the F icon and zoom display glow green, the camera can focus on
subjects as close as 4 cm (1.6 in.) from the lens. At the wide-most zoom position, the
camera can focus on subjects as close as 2 cm (0.8 in.) from the lens.
AF area mode is set to Manual. Press the k button to choose the focus area in which
focus is acquired. (A 104).
The camera focuses continuously until focus is locked by pressing the shutter-release
button halfway.
As pictures are easily affected by camera shake, be sure that Vibration reduction
(A 125) is enabled and hold the camera steadily.
X W* n Off* p On o 0.0*
* Other settings can be selected. Note that when shooting with the flash, the flash may be unable
to light the entire subject at distances of less than 50 cm (1 ft. 7 in.).
u Food Q
Use this mode when taking pictures of food. See Taking
Pictures in Food Mode (A 47) for more information.
AF area mode is set to Manual. Press the k button to
choose the focus area in which focus is acquired (A 104).
m W n Off* p On o 0.0*
l Museum
Use indoors where flash photography is prohibited (for
example, in museums and art galleries) or in other settings in
which you do not want to use the flash.
Camera focuses on subject in center of frame.
BSS (Best Shot Selector) (A 101) is used when shooting.
As pictures are easily affected by camera shake, be sure that
Vibration reduction (A 125) is enabled and hold the camera steadily.
X W n Off* p Off* o 0.0*
42
m Fireworks show O
Slow shutter speeds are used to capture the expanding burst of
light from fireworks.
X W n Off p Off o 0.0
n Copy Q

Provides clear pictures of text or drawings on a white board or
in print.
frame.
Use macro mode (A 35) to focus at short ranges.
Colored text and drawings may not show up well.
X W* n Off* p Off* o 0.0*

o Backlight
Use when light is coming from behind the subject, throwing
features or details in shadow. The flash fires automatically to
fill in (illuminate) shadows.
frame.
X X n Off* p Off o 0.0*

43
p Panorama assist Q
Use to take a series of pictures that will later be joined to form a single panorama using the
supplied Panorama Maker software. See Taking Pictures for a Panorama (A 49) for more
information.
m W* n Off* p Off* o 0.0*

44
Shooting in the Scene Mode Selected by the Camera

(Scene Auto Selector)
By simply framing a picture, the camera automatically selects the optimum scene
mode for simpler shooting. When the camera is aimed at a subject in x scene
auto selector, the camera automatically selects one of the following scene modes.
Auto mode (typical photography) Portrait (A 38)
Landscape (A 38) Night portrait (A 39)
Night landscape (A 41) Close-up (A 42)
Backlight (A 43)

Display the shooting-mode
x Scene auto selector (A 37).
Scene auto selector
Scene auto selector will be enabled.
2 Frame the subject and take the picture.

When the camera automatically selects a scene mode,
the shooting mode icon changes to that for the scene
mode currently enabled.
d: Auto mode g: Night landscape
e: Portrait i: Close-up 13
16
f: Landscape j: Backlight
h: Night portrait
Press the shutter-release button halfway to set focus and exposure. When the subject
is in focus, the active focus area glows green.
Press the shutter-release button the rest of the way down to take the picture.
45
B Note on Scene Auto Selector Mode

Depending upon shooting conditions, the camera may not select the expected scene mode. Should
this occur, switch to A (auto) mode (A 24) or choose the desired scene mode manually (A 37).
C Focusing When Using Scene Auto Selector Mode

When using scene auto selector mode, if the camera detects a face, it focuses on the face
(Shooting with Face Priority A 106).
When the shooting mode icon is d or i (Close-up), just as when AF area mode (A 104) is
set to Auto, the camera automatically selects the focus area (up to nine areas) containing the
subject closest to the camera.
C Flash Mode in Scene Auto Selector Mode

U (auto) (default setting) and W (off) flash mode settings (A 32) can be applied.
When U (auto) is applied, the camera automatically chooses the optimum flash mode setting
for the scene mode it has selected.
When W (off) is applied, the flash does not fire, regardless of shooting conditions.
C Functions Restricted in Scene Auto Selector Mode

The macro mode button on the rotary multi selector cannot be used (A 10, 35).
46
Taking Pictures in Food Mode

Use this mode when taking pictures of food.

u Food (A 37).
Food
Macro mode (A 35) will be turned on
and the camera automatically zooms to
the position at the closest distance at which the camera can focus.

Press the rotary multi selector H or I to
choose white balance.
Press H to increase the amount of red, or I to
increase the amount of blue.
13

The closest distance at which the camera can focus
varies depending on the zoom position. At the zoom
position (wide angle position before the G icon)
where the F icon and zoom display glow green, the
camera can focus on subjects as close as 4 cm (1.6 in.)
13
from the lens. At the wide-most zoom position, the
camera can focus on subjects as close as 2 cm (0.8 in.) Focus area
from the lens.
AF area mode is set to Manual (A 104).

Press the k button to move the focus area. Rotate the
rotary multi selector or press H, I, J or K to move
the focus area to the desired position. Press the k
button again to lock the selected focus area.
Self-timer (A 34) and exposure compensation
(A 36) settings can be adjusted while the focus area is
locked.
47
4 Press the shutter-release button to

take the picture.
Focus is locked when the shutter-release
button is pressed halfway, and a picture is
taken when the shutter-release button is
pressed the rest of the way down. 1/250 F2.7
When the camera is unable to focus, the
focus area blinks red. Change the
composition and press the shutter-release
button halfway again.
B Note on Food Mode

Flash mode is disabled. Macro mode setting (A 35) is set to ON and cannot be changed.
As pictures are easily affected by camera shake, be sure that Vibration reduction (A 125) is
enabled and hold the camera steadily.
C White Balance Setting in Food Mode

Increasing the amount of red or blue decreases the effects of lighting conditions.
Adjusting the white balance setting while using food mode does not change the White balance
setting in the shooting menu (A 98).
The white balance setting applied in food mode is stored in the cameras memory even after the
camera is turned off, and reapplied the next time food mode is selected.
48
Taking Pictures for a Panorama

The camera focuses on the subject in the center of the frame. Use a tripod for best
results.
Set Vibration reduction (A 125) in the setup menu (A 116) to Off when
using a tripod to stabilize the camera during shooting.

p Panorama assist (A 37).
Panorama assist

The I icon is displayed to show the
direction in which pictures will be joined.
2 Use the rotary multi selector to choose the

direction and press the k button.
Decide how pictures will be joined together in the
completed panorama; right (I), left (J), up (K) or
down (L).
The yellow panorama direction icon (II) will move to 13
the direction pressed and press the k button to
choose the direction. A white panorama direction icon (I) will be displayed in the
chosen direction.
Apply flash mode (A 32), self-timer (A 34), macro mode (A 35) and exposure
compensation (A 36) settings with this step, if necessary.
Press the k button again to choose a different direction.
3 Take the first picture.

The picture taken will be displayed in 1/3 of
the monitor.
1/250 F2.7
49
4 Shoot the second picture.

Compose the next picture so that it overlaps
the first picture.
Repeat until you have taken the necessary
number of pictures to complete the image.
End 12
5 Press the k button when shooting is

complete.
The camera returns to step 2.
End 8
B Panorama Assist
Set flash mode, self-timer, macro mode and exposure compensation before taking the first picture.
They cannot be changed after the first picture is taken. Pictures cannot be deleted, nor can zoom
or Image mode setting (A 96) be adjusted after the first picture is taken.
The panorama series is terminated if the camera enters standby mode with the auto off function
(A 128) during shooting. Increasing the time allowed to elapse before the auto off function is
enabled is recommended.
D R (exposure lock) Indicator

When using panorama assist mode, all pictures in the panorama
have the same exposure, white balance, and focus as the first
picture of the panorama.
When the first picture is shot, R is displayed to indicate that
exposure, white balance, and focus are locked.
End 12
D Panorama Maker
Install Panorama Maker from the supplied Software Suite CD.
Transfer pictures to a computer (A 80) and use Panorama Maker (A 83) to join them in a single
panorama.
D More Information
See File and Folder Names (A 139) for more information.
50
Taking Pictures of Smiling Faces (Smart Portrait Mode)
Using Smart Portrait Mode
At the default setting, the camera detects smiling faces using face priority and
releases the shutter automatically (smile timer function). The skin softening
function makes a human subjects skin appear smoother.

button in shooting mode, use the
Smart portrait
rotary multi selector to choose F,
and then press the k button.
Smart portrait mode is selected.

Point the camera at the subject.
When the camera detects a face, the focus area
containing the face will be displayed with a yellow

double border, and when focus is locked the double
border will turn green for a moment.
1/250 F2.7
Up to three faces can be detected. When more than
one face is detected, the face closest to the center of the frame is framed by a double
border and the others by single borders.
3 The shutter is automatically released.

If the camera detects that the face framed by the double border is smiling, the Smile
timer function (A 53) automatically releases the shutter.
When the camera detects a face, the self-timer lamp (A 4) blinks. Immediately after
the shutter is released, the self-timer lamp flickers. Each time the shutter is released,
the camera repeats automatic shooting by face priority and smile detection.
The shutter can also be released by pressing the shutter-release button. If no face is
detected, the camera focuses on the subject in center of frame.
When the shutter is released, the camera makes the subjects skin appear smoother,
then records the image (Skin softening (A 52)).
4 Finish shooting.
To finish automatic shooting of smiling faces, either turn the camera off, set Smile
timer to Off, or press the A button and select another shooting mode.
51
C Face Priority and Smiling Face Detection Features

Under some shooting conditions, faces and smiling faces may not be detected properly.
See Notes on Face Priority (A 107) for more information about face priority.
C Auto Power Off When Using Smile Timer (Standby Mode)

When Smile timer is set to On, the auto off function (A 128) will turn the camera off in the
following situations if no operations are performed.
The camera is unable to detect any face.
The camera has detected one or more faces, but is unable to detect a smiling face.
C Functions Available in Smart Portrait Mode

Flash mode is disabled when Blink proof is set to On. Flash mode (A 32) will be changed to
U (auto) when Blink proof is set to Off (other settings can be selected).
Exposure compensation (A 36) can be adjusted.
If Smile timer and Blink proof are both set to Off, self-timer (A 34) can be set.
Macro mode cannot be used.

Press the d button to display the F (smart portrait) menu and change the settings for Image
mode, Skin softening, Smile timer, or Blink proof.
D More Information
See Autofocus (A 29) for more information.
Smart Portrait Menu

The smart portrait menu contains the following options.
Press the d button in smart portrait mode to display the smart portrait menu
and use the rotary multi selector to modify and apply settings.
Image mode
Allows you to set Image mode (A 96).
Changes made to the image mode setting apply to all shooting modes (except
movie mode).
Skin softening
Set skin softening. When the shutter is released, the camera detects up to 3 faces and
processes the image to make the faces appear smoother, then records the image.
The effect of this feature can be set to High, Normal (default setting), and Low.
When Off is selected, skin softening is turned off.
When skin softening is enabled, the icon for the current setting is displayed in the
monitor during shooting (A 6). When Off is selected, an icon for the current
setting is not displayed. Additionally, the effects of the current skin softening
setting cannot be previewed in the monitor while shooting. To confirm, view the
pictures after shooting.
52
Smile timer
On (default setting): Among the detected faces, if a smile is detected in the face
that is framed by a double border, the camera automatically releases the shutter.
Off: The camera does not release the shutter automatically using smile timer; the
shutter is only released when the shutter-release button is pressed.
When smile timer is enabled, the current setting is displayed during shooting
(A 6). When Off is selected, an icon for the current setting is not displayed.
Blink proof
When set to On, the shutter is released two times
each time a picture is taken; the camera chooses one
image in which the subjects eyes are open, and A blink was detected in the
saves it. picture just taken.
The message on the right will be displayed for a
few seconds when the camera records an image in
which someone may have been blinking.
When set to On, the flash cannot be used.
The default setting is Off.

When blink proof is enabled, the current setting is displayed during shooting
(A 6). When Off is selected, an icon for the current setting is not displayed.
B Notes on Skin Softening

When taking pictures with skin softening, the time required to save the pictures increases slightly.
Depending on shooting conditions, even if the camera detects a face on the monitor at the time
of shooting, effects of the skin softening function may not be visible, and areas other than the face
may be processed. If the desired effect is not achieved, set Skin softening to Off and shoot again.
The amount of skin softening effect that is applied cannot be set while using the portrait or night
portrait scene modes.
Skin softening can also be applied to pictures after they have been taken (A 73).
53
Focusing on a Moving Subject in Subject Tracking Mode
Subject Tracking Mode
Use this mode to shoot moving subjects. Subject tracking begins once you select
a subject to be focused on, and the focus area will move and follow the subject. At
the default setting, once the camera detects a persons face it will automatically
begin tracking that person (face priority tracking).

rotary multi selector to choose s,
Subject tracking
The camera enters subject tracking mode,
and a single border is displayed in the
center of the frame.
The flash mode (A 32) is set to W (off) (the setting can be changed).
2 Select a subject.
Frame the subject in the center of the single border,
and press the k button.
- The subject is registered.

- When the camera is unable to focus on the subject,
the single border will glow red. Change the Start
composition and try again.
Once the subject is selected, it is framed by a yellow
double border, and subject tracking begins.
If the camera detects a face, that face is automatically
registered as the subject to be tracked, and subject
tracking begins (A 56).
To change subjects, press the k button to cancel the
currently selected subject, then select a new subject.
If the camera loses sight of the subject, the double border disappears; register the
subject again.
54
3 Press the shutter-release button to take the

picture.
If the camera focuses on the focus area framed by the
double border when the shutter-release button is
pressed halfway, the double border turns green and
the focus is locked. 1/250 F2.7
If the camera is unable to focus, the double border will
blink. Press the shutter-release button halfway again to focus.
If the shutter-release button is pressed halfway while the double border is not
displayed, the camera focuses on the subject at the center of the frame.
Press the shutter-release button the rest of the way down to take the picture.

B Subject Tracking Mode
Set the zoom position, flash mode, exposure compensation, and menu before registering a
subject. If any of these are changed after a subject is registered, the subject will be canceled.
During certain conditions, such as when the subject is moving quickly, when there is a large
amount of camera shake, or when there are multiple subjects that look alike, the camera may not
be able to register or track a subject, or the camera may track a different subject. Additionally, the
subject may not be tracked properly depending on factors such as the subject's size and
brightness.
In some rare cases shooting subjects with which autofocus may not perform as expected (A 29),
the subject may not be in focus despite the fact that the double border glows green. Should this
occur, switch to auto mode and set AF area mode (A 104) to Manual or Center, refocus on
another subject positioned at the same distance from the camera as the actual portrait subject,
and use focus lock (A 105).
C Usable Functions in Subject Tracking Mode

Flash mode (A 32) and exposure compensation (A 36) settings can be adjusted.
Self-timer (A 34) and macro mode (A 35) cannot be used.
Press the d button to display the s (subject tracking) menu and change the settings for
Image mode, Autofocus mode, or Face priority tracking (A 56).
55
Subject Tracking Menu

The subject tracking menu contains the following options.
Press the d button in subject tracking mode to display the subject tracking
menu and use the rotary multi selector to modify and apply settings.
Image mode
Allows you to set Image mode (A 96).
Changes made to the image mode setting apply to all shooting modes (except
movie mode).
Autofocus mode
Allows you to set the Autofocus mode (A 108) used for subject tracking mode
(the default setting is Full-time AF).
When using subject tracking mode while set to Full-time AF, the camera
continuously focuses once a subject is selected for subject tracking until the
shutter-release button is pressed halfway to lock the focus. The sound of the camera
focusing will be heard.
Changes made to the autofocus mode setting in this mode will not be applied to
the autofocus mode setting in the auto shooting mode. The autofocus mode
setting applied in subject tracking mode is stored in the cameras memory even
after the camera is turned off.

Face priority tracking
When On is selected (default setting), if the camera detects a subjects skin, that
subject is automatically registered as the subject to be tracked, and subject tracking
begins tracking that subject.
B Notes on Face Priority Tracking

Only one subject can be tracked. If the camera detects multiple faces at the same time, the face
nearest the center of the frame is tracked.
Depending on shooting conditions, such as whether or not the subject is facing the camera, faces
may not be detected properly. Notes on Face Priority (A 107)
When the subject you want to focus on cannot be tracked, press the k button to track again, or
set Face priority tracking to Off, frame the picture so that the subject is inside the single border
in the center of the frame, and press the k button to register the subject again.
56
More on Playback/In-Camera Editing
Viewing Multiple Pictures: Thumbnail Playback
Rotate the zoom control to f (h) in full-frame 1/ 10
playback mode (A 30) to display pictures as
thumbnail images in thumbnail playback mode.
The following operations can be performed in

thumbnail playback.
To Use Description A
Rotate the rotary multi selector, or press H,

Choose pictures 10
I, J or K to choose pictures.
Rotate the zoom control towards the f (h)

direction to increase the number of
Increase the number thumbnails from 4 9 16 Calendar
of thumbnails display.
f (h)
displayed/Calendar In Calendar display, move and choose the
display image according to the date (A 59).
Rotate towards the g (i) direction to return to
thumbnail display.

Rotate the zoom control towards the g (i)
direction to decrease the number of
Decrease number of
thumbnails from 16 9 4.
picture thumbnails g (i)
Rotate towards g (i) again during 4
displayed
thumbnails display to return to full frame
playback.
Return to full-frame
k Press the k button. 30
playback
A
30
mode button.
57
C Icons on the Thumbnails Print-set icon Protect icon

When pictures that are marked for Print set
(A 92) or Protect (A 113) are selected in 1/ 10
thumbnail playback mode, the icons shown at
the right are displayed with them.
Movies are displayed as film frames.
Film frames
C Thumbnail Display in Auto Sort

1/ 3
When thumbnails are displayed in the auto sort mode (A 64), the
icon representing the type of the pictures being played back will
appear at the top right corner of the screen.
58
Calendar Display
Rotate the zoom control towards f (h) during
playback mode when 16 thumbnails are displayed
(A 57) to change to Calendar display.
Move the cursor and choose the image according to the
date. Dates will be underlined in yellow if there are 3
pictures taken on that date.
The following operations can be performed while the Calendar is displayed.
Rotate the rotary multi selector, or press H,

Select date 10
I, J or K to select a date.
Return to full-frame Changes to the full-frame playback for the first

k 30
playback photo taken for the chosen date.
Return to thumbnail
g (i) Rotate the zoom control to g (i). 57
display
B Notes on Calendar Display

Images taken without the date set will be treated as images taken on 01.01.09.
l and d buttons are disabled while the Calendar is displayed.
D Note on List by Date Mode

Use list by date mode (A 61) to playback images of the same date.
Playback menu (A 63) operations can also be performed for the images of the chosen date.
59
Taking a Closer Look: Playback Zoom
Rotating the zoom control to g (i) during full-frame
playback mode (A 30) zooms in on the current
picture, enlarging and displaying the center of the
picture on the monitor.
The guide at lower right shows which portion of the
picture is enlarged.
The following operations can be performed while pictures are zoomed in.
Zoom increases each time the zoom control is
Zoom in g (i)
rotated to g (i), up to about 10.
Rotate the zoom control to f (h). When the
Zoom out f (h) magnification ratio reaches 1, the display
returns to full-frame playback mode.
Press the rotary multi selector H, I, J or K to

Move the display
move the display area to other areas of the 10
area
picture.
k Press the k button. 30
playback
Press to crop the current picture to contain only
Crop picture d 75
the portion visible in the monitor.
A
30
mode button.
Pictures Taken Using the Face Priority Function

When zooming in (playback zoom) on a picture taken
using the face priority function (A 106), the picture will
be enlarged with the face detected with shooting at the
center of the monitor (excluding pictures that were shot
using Continuous, BSS and Multi-shot 16 (A 101)).
If more than one face was detected, the picture will be
enlarged with the face on which focus was acquired at
the center of the monitor. Press the rotary multi selector H, I, J, or K to
display other faces that were detected.
When rotating the zoom control towards the g (i) or f (h) direction to
adjust the zoom ratio, the center of the picture (normal playback zoom display),
rather than the face, is displayed at the center of the monitor.
60
Viewing Pictures by Date (List by Date Mode)
In the C list by date mode, you can playback only the images taken on the same
date. In full-frame playback mode, just as with the normal playback mode, picture
displays can be enlarged, pictures can be edited, and movies can be played back.
By pressing the d button to display the List by Date Menu (A 63), you can
delete all pictures with the same date, view a slide show of pictures with the same
date, and set print set or protect for all pictures with the same date.
Selecting a Date in List by Date Mode
1 Display the playback-mode

selection menu by pressing the c
button in playback mode, use the
List by date
rotary multi selector to select C
Dates for which pictures exist will be
listed.
2 Select the desired date. List by date

Camera lists up to 29 dates. If pictures exist for more 20/11/2009 3
than 29 dates, all pictures recorded earlier than most
recent 29 dates will be listed together as Others. 15/11/2009 2

Others 56
When the k button is pressed, the first picture for that

20/11/2009 15:30
date will be displayed in full-frame playback. 0004.JPG
Rotate the zoom control to f (h) in full-frame
playback mode to return to the list of shooting dates
screen.
1 3
B Notes on List by Date Mode

Only the most recent 9,000 pictures can be displayed in list by date mode.
Images taken without the date set will be treated as images taken on 01.01.09.
Histogram and shooting information (A 10) cannot be displayed when using list by date mode.
61
Using List by Date Mode

The following operations are possible from the list by date screen.
Rotate the rotary multi selector, or press H or I

Select date 10
to select a date.
Press the k button to display the first picture

taken on the selected date.
Switch to full-frame
k Rotate the zoom control to f (h) in full-frame 31
playback
playback to return to the list of shooting dates
screen.
Press the l button after selecting a date, and a
confirmation dialog will be displayed. Choose
Delete pictures l 30
Yes and press the k button to delete all pictures
taken on the selected date.
View list by date Press the d button to display the list by date
d 63
menu menu.
Change playback Press the c button to display the playback-
c 9
mode mode selection menu.
A

30
mode button.
62
List by Date Menu

Press the d button in list by date mode to operate the following menus to be
applied to only the pictures taken on the specified date.
Quick retouch* A 71
D-Lighting* A 72
Skin softening* A 73
Print set A 92
Slide show A 112
Delete A 113
Protect A 113
Rotate image* A 114
Small picture* A 74
Voice memo* A 67
* During full-frame playback only
When the d button is pressed in the list by date screen (A 61), options can be
applied to all pictures taken on the same date, or all pictures taken on the same

date can be deleted.
To apply options to individual pictures, or to select individual pictures for deletion,
display a picture full-frame and press the d button.
63
Image Searching (Auto Sort Mode)
Pictures and movies will automatically be sorted in any of the following folder
names after shooting them.
If the F auto sort mode is selected, you can display the pictures and movies by
selecting the folder name sorted in shooting.
a Smile Y Portraits u Food
U Landscape V Dusk to dawn D Close-ups
D Movie X Retouched copies W Other scenes
In full-frame playback mode, just as with the normal playback mode, thumbnail
playback mode and calendar playback mode can be displayed, picture displays
can be enlarged, pictures can be edited, and movies can be played back.
By pressing the d button to display the Auto Sort Menu (A 66), you can
delete all pictures in the same folder, view a slide show of pictures in the same
folder, and set print set or protect for all pictures in the same folder.
Displaying Pictures in the Auto Sort Mode
1 Display the playback-mode

selection menu by pressing the c
Auto sort
button in playback mode, use the
rotary multi selector to select F,

The auto sort folder list screen appears.
2 Select the category. Portraits

See Types of Folders and their Content (A 65) for
more information about auto sort categories.
Pictures in the selected folder will be displayed in full-

15/11/2009 15:30
frame playback. 0004.JPG
The icon of the folder being played back currently will
be displayed in the top right of the screen.
1 4
64
Types of Folders and their Content
Categories Description
Pictures taken in smart portrait mode (A 51) while smile timer
a Smile
was set to On.
Pictures taken in A (auto) mode (A 24) using face priority
(A 106).
Pictures taken in Portrait*, Night portrait*, Party/indoor, and
Y Portraits
Backlight* scene modes (A 37).
Pictures taken in smart portrait mode (A 52) while smile timer
was set to Off.
U Landscape Pictures taken using the Landscape* scene mode (A 37).
Pictures taken using the Night landscape*, Sunset, Dusk/
V Dusk to dawn
dawn, and Fireworks show scene modes (A 37).
Pictures taken in A (auto) mode using macro (A 35).
D Close-ups
Pictures taken using the Close-up* scene mode (A 37).
u Food Pictures taken using the Food (A 47) scene mode (A 37).
D Movie Movies recorded using the movie mode (A 76).
X Retouched copies Edited pictures (A 69).

W Other scenes All pictures that are not included in the other folders.
* The pictures taken using Scene auto selector (A 38) are included.
B Notes when using the Auto Sort Mode

Up to 999 images can be added per folder in the auto sort mode. A newly shot picture/movie
whose folder already contains 999 images cannot be registered nor displayed in the auto sort
mode. Display the picture/movie using the normal playback mode (A 30) or the list by date
mode (A 61).
Pictures or movies copied from the internal memory or the memory card (A 115) cannot be
displayed in the auto sort mode.
Pictures or movies recorded by a camera other than the COOLPIX S640 cannot be displayed in the
auto sort mode.
65
Auto Sort Mode

The following operations are possible from the auto sort folder list screen.
Rotate the rotary multi selector, or press

Select the folder 10
H,I,J or K to select the folder.
Switch to full-frame Press the k button to display the first picture

k 31
playback in the selected folder.
Press the l button after selecting pictures
from the folder, and a confirmation dialog will
Deleting pictures l be displayed. 30
Choose Yes and press the k button to delete
all pictures from the folder.
Change playback Press the c button to display the playback-
c 9
mode mode selection menu.
A
30
mode button.
Auto Sort Menu

Operate the following menus by pressing the d button in the full-frame

playback of auto sort mode or in thumbnail display.
Quick retouch A 71 Delete A 113

D-Lighting A 72 Protect A 113
Skin softening A 73 Rotate image A 114
Print set A 92 Small picture A 74
Slide show A 112 Voice memo A 67
66
Voice Memos: Recording and Playback
Use the cameras built-in microphone to record voice memos for pictures.
Recording Voice Memos
1 Choose the desired picture from full-frame

playback (A 30) or thumbnail playback
(A 57) and press the d button.
The playback menu is displayed.
2 Use the rotary multi selector to choose Playback menu

E Voice memo and press the k button. Delete
The screen for recording a voice memo will be Protect
displayed. Rotate image
Small picture
Voice memo
Exit
3 Press and hold the k button to record voice

memo.
Recording ends after 20 seconds or when the k
button is released.

Do not touch the built-in microphone during
recording. Back 20s
During recording, o and p blink in the monitor.
When recording ends, the voice memo playback
screen is displayed. Follow step 3 of Playing Voice
Memos (A 68) to playback the voice memo.
Press the d button before or after recording a voice
memo to return to full-frame playback.
17s
D More Information
67
Voice Memos: Recording and Playback
Playing Voice Memos

Pictures for which voice memos have been recorded are indicated with p in full-
frame playback mode.
1 Choose the desired picture from 15/11/2009 15:30

full-frame playback (A 30) or 0004.JPG
thumbnail playback (A 57) and
press the d button.
4 4

E Voice memo and press the k button. Delete
The screen for playing a voice memo will be displayed. Protect
Rotate image
Small picture
Voice memo
Exit
3 Press the k button to play voice memo.

Playback ends when the voice memo ends or the k
button is pressed again.

Use the zoom control g or f during playback to
adjust the volume.
Press the d button before or after playing a voice Back 6s
memo to return to full-frame playback.
Deleting Voice Memos

Choose a picture with a voice memo and press the l
button. Use the rotary multi selector to choose w and Erase 1 image?
press the k button. Only the voice memo will be
deleted.
No
Yes
B Notes on Voice Memos

When a picture with a voice memo attached is deleted, both the picture and its voice memo are
deleted.
Voice memos cannot be recorded for a picture that already has a voice memo attached on it. The
current voice memo must be deleted before a new voice memo can be recorded.
Voice memos cannot be attached to images shot using cameras other than the COOLPIX S640.
68
Editing Pictures
Use the COOLPIX S640 to edit pictures in-camera and store them as separate files
(A 139).
Editing function Description
Easily create a copy with enhanced contrast and richer
Quick retouch (A 71)
colors.
Create a copy of the current picture with enhanced
D-Lighting (A 72) brightness and contrast, brightening dark portions of the
picture.
Skin softening (A 73) Makes the subjects skin appear smoother.
Create a small copy of pictures suitable for use on web
Small picture (A 74)
pages or as e-mail attachments.
Crop picture. Enlarge the image or refine the composition
Crop (A 75) and create a copy containing only the portion visible in
the monitor.
C Notes on In-camera Editing

Pictures taken at an Image mode (A 96) setting of P 16:9 (3968) cannot be edited.

The COOLPIX S640 cannot be used to edit images shot using cameras other than the COOLPIX
S640.
If no faces can be detected in the image, the image cannot be edited with skin softening (A 73).
If a copy created using the COOLPIX S640 is viewed on a camera other than the COOLPIX S640, the
picture may not be displayed or may not be transferred to a computer.
Editing functions are not available when there is not enough free space in the internal memory or
on the memory card.
C Restrictions on Picture Editing

The following limitations apply when editing pictures that were created by editing.
Copies Created By: Can Be Edited By:
Quick retouch Skin softening, small picture, or crop can be used.
D-Lighting Quick retouch and D-Lighting cannot be used together.
Skin softening Quick retouch, D-Lighting, small picture, or crop can be used.
Small picture
No additional editing functions can be used.
Crop
Copies created by editing cannot be edited again using the same edit function.
To use an editing function together with small picture or crop, use the other edit function first, and
use small picture or crop as the last edit function performed on that picture.
Pictures that were taken using skin softening can be edited using skin softening.
69
Editing Pictures
D Original Pictures and Edited Copies

Copies created with editing functions are not deleted if the original pictures are deleted. The
original pictures are not deleted if copies created with editing functions are deleted.
Edited copies are stored with the same recording date and time as the original.
Even if the pictures that are marked for print set (A 92) or protect (A 113) are used for editing,
these settings will not be reflected on the edited copies.
70
Editing Pictures
Enhancing Contrast and Saturation: Quick Retouch

Easily create retouched images in which contrast and saturation have been
enhanced. Retouched copies are stored as separate files.

(A 30) or thumbnail (A 57) playback mode
and press the d button.

k Quick retouch and press the k button. Quick retouch
The original version will be shown on the left and the D-Lighting
edited version will be shown on the right. Skin softening
Print set
Slide show
Exit
3 Choose the extent of the setting using H or Quick retouch

I of the rotary multi selector, and press the
k button.

A retouched copy is created.
To cancel, press the d button. Normal
Back Amount
Quick retouched copies can be recognized by the s
15/11/2009 15:30
icon displayed during playback. 0004.JPG
4 4
D More Information
71
Editing Pictures
Enhancing Brightness and Contrast: D-Lighting

D-Lighting can be used to create copies with enhanced brightness and contrast,
brightening dark portions of a picture. Enhanced copies are stored as separate
files.

2 Use the rotary multi selector to choose I D- Playback menu

Lighting and press the k button. Quick retouch
The original version will be shown on the left and the D-Lighting
edited version will be shown on the right. Skin softening
Print set
Slide show
Exit
3 Choose OK and press the k button. D -Lighting

A new copy with enhanced brightness and contrast is
created.
To cancel, choose Cancel and press the k button.

OK
Cancel
D-Lighting copies can be recognized by the c icon

15/11/2009 15:30
displayed during playback. 0004.JPG
4 4
D More Information
72
Editing Pictures
Making Skin Appear Smoother: Skin Softening

Skin softening can be applied to faces that are detected in pictures already taken, to
make skin appear smoother. Pictures edited with this function are stored as separate files.

2 Use the rotary multi selector to choose e Playback menu

Skin softening and press the k button. Quick retouch
The screen that allows you to set the amount of skin D-Lighting
softening appears. Skin softening
Print set
If no faces can be detected in the image, a warning is
Slide show
displayed and the screen returns to the playback menu. Exit
3 Press H or I to choose the amount of skin Skin softening

softening to be applied, and press the k
button.
A confirmation screen is displayed, and the image is

displayed zoomed in on the face edited by skin Normal
softening. Back Amount
4 Confirm the results. Preview

Up to 12 faces, in order of proximity to the center of the
frame, can be enhanced.
When multiple faces are edited using skin softening,
use the rotary multi selector J and K to switch the
face that is displayed. Back Save
To adjust the amount of skin softening, press the d
button and return to step 3. 15/11/2009 15:30
0004.JPG
Press the k button to create a copy edited with skin
softening.
Copies created by editing with skin softening can be
recognized by the E icon displayed during playback.
4 4
C Notes on Skin Softening
Depending on conditions such as the direction the subject is facing or the brightness of the face, the
face may not be detected properly, or the desired effect may not be achieved.
73
Editing Pictures
Resizing Pictures: Small Picture

Create a small copy of the current picture. Small copies are stored as separate files
with a compression ratio of 1:16. The following sizes are available.
Option Description
l 640480 Suitable for television playback.
m 320240 Suitable for displaying on web pages.
n 160120 Suitable for e-mail attachments.


g Small picture and press the k button. Delete
Protect
Rotate image
Small picture
Voice memo
Exit
3 Choose the desired copy size and press the k Small picture
button. 640480
320240
160120
Exit
4 Choose Yes and press the k button.

A new, smaller copy is created. Create small picture file?
To cancel, choose No and press the k button.
Images created using small picture are displayed with a
gray border. No
Yes
D More Information
74
Editing Pictures
Creating a Cropped Copy: Crop

Create a copy containing only the portion visible in the monitor when u is displayed
with playback zoom (A 60) enabled. Cropped copies are stored as separate files.
1 Enlarge the desired picture during full-frame

display (A 30) by rotating the zoom control to
the g (i) direction.
To crop a picture displayed in tall (portrait) orientation,
zoom in on the picture until the black bars displayed on
the both sides of the monitor disappear. The cropped
picture will be displayed in landscape orientation. To
crop the picture in its current tall (portrait) orientation,
first, use the Rotate image option (A 114) to rotate the picture so that it is
displayed in landscape orientation. Next, enlarge the picture for cropping, crop the
picture, and then rotate the cropped picture back to tall (portrait) orientation.
2 Refine copy composition.

Rotate the zoom control to g (i) or f (h) to adjust
the zoom ratio.
Press the rotary multi selector H, I, J or K to move
the display area to other areas of the picture.

3 Press the d button.
4 Use the rotary multi selector to choose Yes

and press the k button. Save this image as
A new picture, containing only the portion visible in displayed?
the monitor, is created.
To cancel, choose No and press the k button.
No
Yes
C Image Size
As the area to be saved is reduced, the image size (pixels) of the cropped copy is also reduced.
When the size of the cropped copy is 320 240 or 160 120, the copy is displayed with a gray
border during playback, and the small picture icon B or C is displayed on the left of the screen in
full-frame playback mode.
D More Information
75
Movies
Recording Movies
To shoot movies with sound recorded via the built-in microphone, select shooting
mode and follow the steps below.

rotary multi selector to select D,
Movie
The amount of available recording time is
shown in the monitor (A 77). Regardless
of the remaining memory on the memory card, the maximum size of a single movie is
2 GB, and the maximum length of a single movie is 25 minutes.
2 Press the shutter-release button all

the way down to start recording.
Camera focuses on the subject in center
of the frame.
A progress bar at the bottom of the
monitor shows the amount of recording 23s
time remaining.
To end recording, press the shutter-release button all the way down again.
Recording stops automatically when the available recording time runs out.
B Shooting Movies
Movies
Macro mode (A 35) is enabled. Flash (A 32), self-timer (A 34), and exposure compensation
(A 36) are disabled.
Macro mode settings cannot be applied or changed while movies are being recorded. Apply or
change settings as necessary before movie recording begins.
Optical zoom cannot be adjusted once movie recording begins. Digital zoom cannot be applied
before movie recording begins, but up to 2 digital zoom can be applied while movies are being
recorded.
B Note on Recording Movies

When the movie has been fully recorded to the internal memory or memory card, the monitor
display will revert to the normal shooting mode display. Do not open the battery-chamber/
memory card slot cover while movies are being recorded. Turning the camera off or removing
the memory card while movies are being recorded could result in loss of data or in damage to the
camera or card.
C Changing Movie Settings

Movie options and Autofocus mode settings can be changed in the movie menu (A 77).
76
The Movie Menu
Movie options and Autofocus mode (A 77) settings can be changed in the movie menu.
Press the d button in movie mode to display the movie menu and use the
rotary multi selector to modify and apply settings.
D Selecting Movie Options
Set to D (Movie) M d (Movie menu) M D Movie options
The movie menu offers the options shown below.

Option Image size and frame rate
Image size: 640 480 pixels
I TV movie 640 (default setting) Frame rate: 30 frames per second
Image size: 320 240 pixels
S Small size 320
Frame rate: 30 frames per second
C Maximum Movie Length

Internal memory
Option Memory card (512 MB)
(approx. 45 MB)
I TV movie 640 (default setting) 32 s Approx. 5 min 30 s
S Small size 320 1 min 22 s Approx. 14 min 20 s
* All figures are approximate. The maximum recording time may vary with make of memory card.
Regardless of the remaining memory on the memory card, the maximum size of a single movie is
2 GB, and the maximum length of a single movie is 25 minutes. The amount of available recording
time is shown in the monitor while recording.
D More Information
Movies
I Autofocus Mode
Set to D (Movie) M d (Movie menu) M I Autofocus mode
Choose how the camera focuses in movie mode.

Option Description
ASingle AF
Focus is locked when the shutter-release button is pressed.
(default setting)
Camera focuses continuously.
BFull-time AF To prevent sound of camera focusing from interfering with
recording, use of Single AF is recommended.
77
Movie Playback
In full-frame playback mode (A 30), movies are 15/11/2009 15:30
recognized by the movie options (A 77) icons. To play 0010. AAVI
VI
a movie, display it in full-frame playback mode and
press the k button.
10s
Use the zoom control g or f during playback to Pausing

adjust the volume.
Rotating the rotary multi selector enables fast-
forwarding/rewinding.
Playback controls appear at the top of the monitor.
Press the rotary multi selector J or K to choose a
control, then press the k button to perform the 4s
selected operation. The following operations are During Volume
available. playback indicator
To Select Description
Rewind K Rewind the movie when the k button is pressed down.
Advance L Advance the movie when the k button is pressed down.
Press the k button to pause playback.
The following operations can be performed while playback is
paused.
Press the k button to rewind the movie by one frame.
Movies
Pause O M
Rewind continues while the button is pressed. *
Press the k button to advance the movie by one frame.
N
Advance continues while the button is pressed. *
P Press the k button to resume playback.
End Q Press the k button to return to full-frame playback mode.
* The rotary multi selector can also be rotated to advance or rewind the movie frame by frame.
Deleting Movie Files

Press the l button when displayed in full-frame
playback mode (A 30) or when selected in thumbnail Erase 1 image?
(A 57) playback mode.
A confirmation dialog is displayed. Select Yes and press
the k button to delete the movie, or select No to exit No
without deleting the movie. Yes
78
Connecting to a TV
Connect the camera to a television using the supplied audio/video cable to play
back pictures on the television.
1 Turn off the camera.
2 Connect the camera to the TV using the supplied audio/video cable.

Connect the yellow plug to the video-in jack on the TV, and the white plug to the
audio-in jack.
Yellow White
3 Tune the television to the video channel.

See the documentation provided with your television for details.
4 Hold down the c button to turn on the

camera.
The camera enters playback mode, and pictures
recorded to the internal memory, or memory card, will
be displayed on the television.
While connected to the TV, the camera monitor will
remain off.
B Connecting the Audio/Video Cable

When connecting the audio/video cable, be sure that the connectors are oriented correctly. Do not
use force when connecting the audio/video cable. When disconnecting the audio/video cable, do
not pull the connector at an angle.
B When Nothing Appears on the TV

Be sure that the cameras video mode setting in the Setup menu (A 116) Video mode
(A 130) conforms to the standard used by your television.
79
Connecting to a Computer
Use the supplied USB cable to connect the camera to a computer, and copy
(transfer) pictures to a computer with the supplied Nikon Transfer software.
Before Connecting the Camera

Install the Software
Before connecting the camera to a computer, software, including Nikon Transfer,
ViewNX for viewing transferred pictures, and Panorama Maker for creating
panorama images, must be installed from the supplied Software Suite CD.
For more information on installing the software, refer to the Quick Start Guide.
Compatible Operating Systems
Windows
Preinstalled versions of Windows Vista Service Pack 1 (32-bit Home Basic/Home
Premium/Business/Enterprise/Ultimate editions),
Windows XP Service Pack 3 (Home Edition/Professional)
Macintosh
Mac OS X (version 10.3.9, 10.4.11, 10.5.6)
Refer to the Nikon website for the latest information on operating system
compatibility.
B Note on Computer Connection

Disconnect other USB devices such as commercial USB chargers from the computer. Simultaneous
connection of the camera and other USB devices to the computer could result in operation
malfunction or excessive supply of power to the camera, causing damage to the camera or memory
card. Refer to the documentation supplied with other USB devices for more information.
B Notes on Power Source

When connecting the camera to a computer to transfer pictures, use a fully charged battery to
prevent the camera from turning off unexpectedly.
When the camera is connected to a computer via the supplied USB cable with Auto (default
setting) selected for the Charge by computer option (A 84, 131) in the setup menu, the battery
inserted into the camera is automatically charged using power supplied by the computer. Pictures
can be transferred while the battery is charging.
If the AC Adapter EH-62F is used, power can be supplied to the COOLPIX S640 from an electrical
outlet. Do not, under any circumstances, use another make or model of AC adapter other than EH-
62F. Failure to observe this precaution could result in overheating or in damage to the camera.
80
Transferring Pictures from the Camera to a Computer
1 Start the computer to which Nikon Transfer was installed.

2 Be sure that the camera is off.
3 Connect the camera to the computer using the supplied USB cable.

4 The camera automatically turns on.
The power-on lamp will light. The camera monitor will
remain off.
Windows Vista
When the AutoPlay dialog is displayed, click Copy
pictures to a folder on my computer using Nikon Transfer. Nikon Transfer will start.
To bypass this dialog in the future, check Always do this for this device.
Windows XP
When the action selection dialog is displayed, select Nikon Transfer Copy pictures to
a folder on my computer and click OK. Nikon Transfer will start.
To bypass this dialog in the future, check Always use this program for this action.
Mac OS X
Nikon Transfer will start automatically if Yes was selected in the Auto-Launch setting
dialog when Nikon Transfer was first installed.
B Connecting the USB Cable

Be sure that connectors are properly oriented. Do not attempt to insert connectors at an angle,
and do not use force when connecting or disconnecting the USB cable.
The connection may not be recognized if the camera is connected to the computer via a USB hub.
81
5 Confirm that the source device is displayed in the transfer options

Source panel and click Start Transfer.
Source device Start Transfer button

At the Nikon Transfer default settings, all pictures are transferred to the computer.
At the Nikon Transfer default settings, ViewNX starts automatically when transfer is
complete and transferred pictures can be viewed.
For more information on using Nikon Transfer or ViewNX, refer to help information
contained in Nikon Transfer or ViewNX (A 83).
Disconnecting the camera

Do not turn off the camera or disconnect the camera from the computer during transfer.
When transfer is complete, turn off the camera and disconnect the USB cable.
The camera turns off automatically if there is no communication with the
computer for 30 minutes while the camera is connected via the USB cable.
C Charging the Battery

When the cameras charge lamp is blinking slowly in green, the battery inserted in the camera is
charging (A 84).
82
C Using a Card Reader

The pictures stored on the memory card inserted into a card reader or similar device can also be
transferred to the computer using Nikon Transfer.
If the memory card has a capacity greater than 2 GB, or is SDHC-compliant, the intended device
must support these features of the memory card.
Insert a memory card into the card reader or similar device, and refer to the steps 4 and 5 to
transfer pictures.
To transfer pictures stored in the cameras internal memory to the computer, the pictures must
first be copied to a memory card using the camera (A 115).
D Starting Nikon Transfer or ViewNX Manually

Windows
Choose Start menu>All Programs>Nikon Transfer>Nikon Transfer (or All
Programs>ViewNX>ViewNX).
Double-clicking the Nikon Transfer or ViewNX shortcut icon on the desktop will also start Nikon
Transfer or ViewNX.
Macintosh
Open Applications and click Nikon Software>Nikon Transfer>Nikon Transfer (or Nikon
Software>ViewNX>ViewNX).
Clicking the Nikon Transfer or ViewNX icon on the Dock will also start Nikon Transfer or ViewNX.
D Viewing Nikon Transfer and

ViewNX Help Information
For more information on Nikon Transfer or
ViewNX, start Nikon Transfer or ViewNX and
select Nikon Transfer Help or ViewNX Help
from the Help menu.
D Panorama Creation with Panorama Maker

Use a series of pictures taken in Panorama assist scene mode (A 49) to create a single
panorama photo with Panorama Maker.
Panorama Maker can be installed on a computer using the supplied Software Suite CD.
After installation is complete, follow the procedure described below to start Panorama Maker.
Windows
Choose Start menu>All Programs>ArcSoft Panorama Maker 4>Panorama Maker 4.
Macintosh
Open Applications and double-click the Panorama Maker 4 icon.
For more information on using Panorama Maker, refer to the on-screen instructions and help
information contained in Panorama Maker.
D Image File Names and Folder Names

83
Charging While Connecting to a Computer

When connecting the camera to a computer via the supplied USB cable while
Auto (default setting) is selected for the Charge by computer option (A 131) in
the setup menu, the battery inserted into the camera is automatically charged
using power supplied by the computer.
See Before Connecting the Camera (A 80) and Transferring Pictures from the Camera
to a Computer (A 81) for more information on connecting the camera to a computer.
Charge Lamp
The following chart explains charge lamp status when the camera is connected to a computer.
Charge lamp Description
Slow blinking (green) Battery charging.
Off Not charging.
If the charge lamp changes from slow blinking (green) to off
while the power-on lamp is lit, charging is complete.
Fast blinking (green) Operating temperature range exceeded. Charge the battery
indoors with an ambient temperature of 5C to 35C (41F to
95F) before use.
A USB cable is not correctly connected or the battery is faulty.
Reconnect the USB cable correctly or replace the battery.
Computer is in sleep mode and does not supply power.
Reboot a computer.
The battery cannot be charged as computers specifications or
settings does not support power supply to the camera.
B Notes on Charging with Connection to a Computer

The battery cannot be charged, nor can data be transferred, when the camera is connected to a
computer before the cameras date and time have been set (A 20). If the cameras clock battery
(A 121) has been exhausted, the date and time must be reset before the battery can be charged
or images can be transferred with connection to a computer. In this case, use the Charging AC
Adapter EH-68P (A 16) to charge the battery and then set the cameras date and time.
If the camera is turned off, charging will also stop.
If a computer enters sleep mode while charging, charging will stop and the camera may be turned off.
When disconnecting the camera from a computer, turn the camera off and then disconnect the
USB cable.
It may take longer to charge the battery with connection to a computer than with charging using
the Charging AC Adapter. Charging time increases when images are transferred while the battery
is charging.
When the camera is connected to a computer, an application installed on the computer, such as
Nikon Transfer, may start. If the camera was connected to the computer for the sole purpose of
charging the battery, exit the application.
The camera turns off automatically if there is no communication with the computer for 30 minutes
after the battery has finished charging.
Depending upon computer specifications, settings, and power supply and allocation, it may be
impossible to charge the battery inserted into the camera via computer connection.
84
Connecting to a Printer
Users of PictBridge-compatible (A 157) printers can connect the camera directly
to the printer and print pictures without using a computer. The steps for printing
are as follows.
Take the pictures
Choose the pictures for

printing using the print set
option (Print set: A 92)

Connect to printer (A 86)
Print Pictures One at a Time

Print multiple pictures (A 89)
(A 88)
Turn camera off and disconnect USB cable
B Notes on Power Source

When connecting the camera to a printer, use a fully charged battery to prevent the power from
turning off unexpectedly.
Use the optional AC Adapter EH-62F to charge the COOLPIX S640 using home electronic outlets.
Do not, under any circumstances, use another make or model of AC adapter. Failure to observe
this precaution could result in overheating or in damage to the camera.
D Printing Pictures
In addition to printing pictures transferred to a computer and printing over a direct camera-to-
printer connection for images recorded in the memory card, the following options are also available
for printing pictures:
Insert a memory card into a DPOF-compatible printers card slot.
Take a memory card to a digital photo lab.
For printing using these methods, specify the pictures and the number of prints each using the
Print set (A 92) option in the playback menu.
85
Connecting the Camera to a Printer
1 Turn off the camera.
2 Turn on the printer.

Check printer settings.
3 Connect the camera to the printer using the supplied USB cable.
4 The camera automatically turns on.

When connected correctly, the PictBridge startup
screen (1) will be displayed in the camera monitor.
Then the Print selection screen (2) will be displayed.
1 2 Print selection
15/11
2009
NO. 32
[ 32 ]
86
B If the PictBridge Screen is not Displayed

Turn off the camera and disconnect the USB cable. Set Charge by computer (A 131) in the
cameras setup menu to Off, then connect the camera again.
B Connecting the USB Cable

Be sure that connectors are properly oriented. Do not attempt to insert connectors at an angle, and
do not use force when connecting or disconnecting the USB cable.
87
Printing Pictures One at a Time

After connecting the camera to the printer correctly (A 86), print pictures by
following the procedure below.
1 Use the rotary multi selector to choose the Print selection

picture to be printed and press the k button. 15/11
Rotate the zoom control to f (h) to display 12 2009
thumbnails, or to g (i) to switch back to full-frame
NO. 32
playback. [ 32 ]
2 Choose Copies and press the k button. PictBridge

Start print
Copies
Paper size
Exit
3 Choose the number of copies (up to nine) and Copies

press the k button.
4
Exit
4 Choose Paper size and press the k button. PictBridge

Start print
Copies
Paper size
Exit
5 Choose the desired paper size and press the Paper size
k button. 46 in.
To specify paper size using printer settings, choose 810 in.
Default in the paper size menu. Letter
A3
A4
Exit
88
6 Choose Start print and press the k button. PictBridge

Start print
Copies
Paper size
Exit
7 Printing starts.

Monitor display returns to that shown in step 1 when
printing is complete. Printing
To cancel before all copies have been printed, press 002/004
the k button.
Cancel
Current print/
total number of prints
Printing Multiple Pictures

After connecting the camera to the printer correctly (A 86), print pictures by
following the procedure below.
1 When the Print selection screen is displayed,

press the d button.
The Print menu is displayed.
2 Use the rotary multi selector to choose Paper Print menu

size and press the k button. Print selection
To exit the print menu, press the d button. Print all images
DPOF printing
Paper size
Exit
89
3 Choose the desired paper size and press the Paper size
k button. Default
To specify paper size using printer settings, choose 3.55 in.
Default in the paper size menu. 57 in.
100150 mm
46 in.
Exit
4 Choose Print selection, Print all images or Print menu

DPOF printing and press the k button. Print selection

Print all images
DPOF printing
Paper size
Exit
Print selection
Choose the pictures (up to a maximum of 99)
Print selection 10
and number of copies (up to nine per picture).
Rotate the rotary multi selector, or press J or 1 1 3
K to choose the pictures, and press H or I to
set the number of copies for each.
Pictures selected for printing can be
recognized by the check mark icon and the Back
numeral indicating the number of copies to be
printed. A check mark is not displayed with
pictures for which no copies have been specified and these pictures will not
be printed.
Rotate the zoom control to g (i) to switch to full-frame playback, or f (h)
to switch to 12 thumbnails display.
Press the k button when setting is complete.
The menu shown at right will be displayed. To
Print selection
print, choose Start print and press the k
010 prints
button. Choose Cancel and press the k
button to return to the print menu.
Start print
Cancel
Exit
90
Print all images

All pictures stored in the internal memory, or on
Print all images
the memory card, are printed one at a time.
018 prints
print, choose Start print and press the k
button. Start print
Choose Cancel and press the k button to Cancel
return to the print menu. Exit
DPOF printing

Print the pictures in the print order that was
DPOF printing
created using Print set (A 92).
010 prints
print, choose Start print and press the k Start print
button. View images
Choose Cancel and press the k button to Cancel
return to the print menu. Exit
To view the current print order, choose View

View images 10
images and press the k button. To print
pictures, press the k button again.
Back
5 Printing starts.
Monitor display returns to that shown in step 2 when
printing is complete. Printing
To cancel before all copies have been printed, press 002/010
the k button.
Cancel
Current print/
total number of prints
C Paper Size
The camera supports the following paper sizes: Default (the default paper size for the current
printer), 3.55 in., 57 in., 100150 mm, 46 in., 810 in., Letter, A3, and A4. Only sizes
supported by the current printer will be displayed.
91
Creating a DPOF Print Order: Print Set
The Print set option in the playback menu is used to create digital print orders for
printing on DPOF-compatible printers or in print shops (A 157).
When the camera is connected to a PictBridge-compatible printer, pictures can be
printed from the printer according to the DPOF print order you have created for
pictures on the memory card. If the memory card is removed from the camera, you
can create the DPOF print order for pictures in the internal memory and print
pictures according to the DPOF print order.
1 Press the d button in playback mode.

2 Use the rotary multi selector to choose Print Playback menu

set and press the k button. Quick retouch
D-Lighting
When viewing pictures by List by date or Auto sort mode
Skin softening
step 4 Print set
Slide show
Exit
3 Choose Select images and press the k Print set

button. Select images
Delete print set
Exit
4 Choose the pictures (up to a maximum of 99) Print selection

and number of copies (up to nine per picture).
1 1 3
Rotate the rotary multi selector, or press J or K to
choose the pictures, and press H or I to set the
number of copies for each.
Pictures selected for printing can be recognized by the Back
check mark icon and the numeral indicating the
number of copies to be printed. A check mark is not displayed with pictures for which
no copies have been specified and these pictures will not be printed.
Rotate the zoom control to g (i) to switch to full-frame playback, or f (h) to
switch to 12 thumbnails display.
Press the k button when setting is complete.
92
5 Choose whether or not to also print shooting Print set

date and photo information. Done
Choose Date and press the k button to print the date
of recording on all pictures in the print order. Date
Info
Choose Info and press the k button to print shooting
information (shutter speed and aperture) on all Exit
pictures in the print order.
Choose Done and press the k button to complete the print order.

Pictures selected for printing are recognized by the w 15/11/2009 15:30
icon displayed with playback. 0004.JPG
4 4
C Deleting All Print Orders

Choose Delete print set in step 3 and press the k button. Print orders for all pictures will be
deleted.
B Notes on the Print Set Option

When using Print set while viewing pictures by List by date or Auto
Print set
sort mode, if pictures other than the selected date or type are
Save print marking for other
already set for printing, the screen shown at right will be displayed.
dates?
If Yes is selected, the current settings are added to the previous
settings. No
If No is selected, the previous settings are deleted and only the Yes
current settings remain. Exit
When using List by date
Print set
Save print marking for other
images?
No
Yes
Exit
When using Auto sort
mode
93
If more than 99 pictures are selected as a result of adding the

Print set
current settings, the screen shown at right will be displayed.
Too many images selected.
If Yes is selected, the previous settings are deleted and only the Remove print marking for
current settings remain. other dates?
If Cancel is selected, the current settings are deleted and only Yes
the previous settings remain. Cancel
Exit
When using List by date
Print set
Too many images selected.
Remove print marking from

other images?
Yes
Cancel
Exit
When using Auto sort
mode
B Notes on Printing Shooting Date and Photo Information

When the Date and Info options are enabled in the Print set menu, shooting date and photo
information are printed on pictures when a DPOF-compatible (A 157) printer which supports
printing of shooting date and photo information is used.
Photo information cannot be printed when the camera is connected directly to a printer, via the
supplied USB cable, for DPOF printing (A 91).
Date and Info are reset each time the Print set menu is displayed.
The date and time printed on the picture is the date and time
recorded on the camera when the picture was taken. The date
and time printed using this option will not be affected even if the
cameras Date setting is changed from the setup menu after the
pictures are taken.
15.11.2009
D Date Imprint
The shooting date and time can be imprinted in pictures at the time of shooting by using Date
imprint (A 124) in the setup menu. This information can be printed even from printers that do not
support printing of date and time.
Only the date and time of date imprint on the pictures will be printed, even if Print set is enabled
with the date selected in the print set screen.
94
Shooting, Playback and Setup Menus
Shooting Options: The Shooting Menu
While shooting in A (auto) mode (A 24), the shooting menu contains the
following options.
A Image mode A 96
Choose the image mode (a combination of the image size and image quality
(compression)) to be used when recording.
Also available when using other shooting modes (except movie mode).
B White balance A 98
Match white balance to the light source.
G Metering A 100
Choose how the camera meters exposure.
C Continuous A 101
Change settings for Continuous and BSS (Best Shot Selector).
E ISO sensitivity A 102

Control the cameras sensitivity to light.
F Color options A 103
Apply color effects to pictures as they are recorded.
G AF area mode A 104
Choose how the focus area is determined.
I Autofocus mode A 108
Choose how the camera focuses.
Displaying the Shooting Menu

Set the camera to A (auto) mode (A 24).
Press the d button to display the shooting menu.
Shooting menu
Image mode
White balance
Metering
Continuous
ISO sensitivity
13 Exit
Use the rotary multi selector to choose and apply settings (A 10).
Press the d button to exit the shooting menu.
B Functions that Cannot be Applied Simultaneously

Some functions cannot be enabled in conjunction with others (A 109).
95
A Image Mode
Set to A (Auto) M d (Shooting menu) M A Image mode
Choose an image mode, which is the combination of image size and image quality
(compression), according to how you plan to use the picture and the capacity of
the internal memory or memory card.
The larger the image, the larger the size at which it can be printed or displayed
without becoming noticeably grainy, limiting the number of pictures that can be
recorded.
Image size
Image mode Description
(pixels)
Highest quality, suitable for enlargements
H High (4000P) 4,0003,000 or high-quality prints. The compression
ratio is approximately 1:4.

Normal (4000)
I 4,0003,000
(default setting) The best choice in most situations. The
R Normal (3264) 3,2642,448 compression ratio is approximately 1:8.
L Normal (2592) 2,5921,944
Smaller size allows more pictures to be
M Normal (2048) 2,0481,536 stored. The compression ratio is
approximately 1:8.
Suited to display on computer monitor. The
N PC screen (1024) 1,024768
compression ratio is approximately 1:8.
Suited to full-screen display on a television
O TV screen (640) 640480 or distribution by e-mail or the web. The
compression ratio is approximately 1:8.
Pictures with an aspect ratio of 16:9 can be
P 16:9 (3968) 3,9682,232 taken. The compression ratio is
approximately 1:8.
The icon for the current setting is displayed in the monitor in shooting and
playback modes (A 6, 7).
C Image Mode
Changes made to the image mode setting apply to all shooting modes (except those available
from the movie mode).
This feature cannot be used simultaneously with certain features. Functions that Cannot be
Applied Simultaneously (A 109)
96
C Number of Exposures Remaining

The following table lists the approximate number of pictures that can be stored in internal memory
and on a 512 MB memory card. Note that the number of images that can be stored will differ
depending on the composition of the image (due to JPEG compression). In addition, this number
may differ depending on the make of memory card, even if the capacity for the memory card is the
same.
Internal
Memory card1 Print size2
Setting memory
(512 MB) (cm/in.)
(approx. 45 MB)
H High (4000 P) 7 Approx. 80 34 25/13 10
I Normal (4000) 13 Approx. 150 34 25/13 10
R Normal (3264) 19 Approx. 220 28 21/11 8
L Normal (2592) 31 Approx. 340 22 16/8.5 6.5
M Normal (2048) 49 Approx. 550 17 13/7 5
N PC screen (1024) 159 Approx. 1,700 9 7/3.5 2.5

O TV screen (640) 319 Approx. 3,400 5 4/2 1.5
P 16:9 (3968) 18 Approx. 200 34 19/13 7.5
1 If the number of exposures remaining is 10,000 or more, the number of exposures remaining
display shows 9999.
2 Print size at an output resolution of 300 dpi.
Print sizes are calculated by dividing the number of pixels by printer resolution (dpi) and
multiplying by 2.54 cm (1 in.). However, even with the same image size setting, images printed at
higher resolutions will print smaller than the size indicated, and those printed at lower resolutions
will print larger than the size indicated.
97
B White Balance
Set to A (Auto) M d (Shooting menu) M B White balance
The human brain is able to adapt to changes in the color of the light source, with
the result that white objects appear white whether seen in the shade, direct
sunlight, or under incandescent lighting. Digital cameras can mimic this
adjustment of the human eye by processing images according to the color of the
light source. This is known as white balance. For natural coloration, choose a
white balance setting that matches the light source before shooting.
Although the default setting, Auto, can be used under most types of lighting, you
can apply the white balance setting suited to a particular light source to achieve
more accurate results.
a Auto (default setting)
White balance automatically adjusted to suit lighting conditions. Best choice in

most situations. Can be used in most situations.
b Preset manual
Neutral-colored object used as reference to set white balance under unusual
lighting conditions, see Preset Manual (A 99) for details.
c Daylight
White balance adjusted for direct sunlight.
d Incandescent
Use under incandescent lighting.
e Fluorescent
Use under most types of fluorescent lighting.
f Cloudy
Use when shooting under overcast skies.
g Flash
Use with the flash.
The effects of the selected option can be previewed in the monitor. At settings
other than Auto, the icon for the current setting is displayed in the monitor (A 6).
B White Balance
B Flash Mode
At white balance settings other than Auto or Flash, turn the flash off (W) (A 32).
98
Preset Manual
Preset manual is used with mixed lighting or to compensate for light sources with
a strong color cast when the desired effect has not been achieved with white
balance settings like Auto and Incandescent (for example, to make images shot
under a lamp with a red shade look as though they had been shot under white
light).
1 Place a white or gray reference object under the lighting that will be
used during shooting.
2 Display the shooting menu (A 95), use the White balance
rotary multi selector to set White balance to Auto
b Preset manual, then press the k button. Preset manual
Daylight
The camera zooms in. Incandescent
Fluorescent

Exit
3 Choose Measure. Preset manual

To use the most recently measured value for preset
manual, choose Cancel and press the k button. The
most recently measured value will be set for White
Balance. Cancel
Measure
Exit
4 Frame the reference object. Preset manual
Cancel
Measure
Exit
Reference object frame
5 Press the k button to measure the white balance value.

The shutter is released and the new white balance value is set (no picture is recorded).
C Note on Preset Manual

The camera cannot measure a white balance value for when the flash fires. When shooting with the
flash, set White balance to Auto or Flash.
99
G Metering
Set to A (Auto) M d (Shooting menu) M G Metering
The process of measuring the brightness of the subject to determine the exposure
is known as Metering.
Choose how the camera meters exposure.
G Matrix (default setting)
Camera sets exposure for entire frame. Recommended in most situations.
q Center-weighted
Camera meters entire frame but assigns greatest weight to subject in center of
frame. Classic meter for portraits; preserves background details while letting lighting
conditions at center of frame determine exposure. Can be used with focus lock
(A 105) to meter off-center subjects.
B Note on Metering
When using digital zoom, Metering is set to Center-weighted, and the metered area is not
displayed in the monitor.
D Metering Area
The active metering area is displayed in the monitor when Center-weighted is selected for
Metering.
Active metering area

13
100
C Continuous
Set to A (Auto) M d (Shooting menu) M C Continuous
Change settings for Continuous and BSS (Best Shot Selector).

Flash will be switched off when Continuous, BSS, or Multi-shot 16 is selected.
Focus, exposure, and white balance are fixed at the values for the first image in
each series.
U Single (default setting)
One image is shot each time the shutter-release button is pressed.
V Continuous
While the shutter-release button is held down, the camera shoots up to 10 pictures
at a rate of up to about 0.8 frames per second (fps) (when image mode is set to
I Normal (4000)). Shooting ends when the shutter-release button is released, or
ten shots have been taken with the shutter-release button held down.

j BSS (Best shot selector)
BSS is recommended for shooting under low lighting without the flash, with the
camera zoomed in, or in other situations in which camera shake is likely to blur pictures.
The camera takes up to ten images while the shutter-release button is held down.
The sharpest image (image with the most detail) in the series is automatically
selected and saved.
W Multi-shot 16
Each time the shutter-release button is pressed all the way
down, 16 pictures are shot at about 30 fps and the camera
arranges them in a single picture.
Images are captured with the image mode locked at L 2592.
At settings other than Single, the indicator for the current setting is displayed in
the monitor (A 6).
B Note on Continuous Shooting

The maximum frame rate with continuous shooting may vary, depending upon the current image
mode and the type of memory card used.
B Note on Best Shot Selector

BSS is best suited for shooting stationary subjects. It may not produce the desired results if the
subject moves or the composition changes while the shutter-release button is pressed all the way
down.
101
B Note on Multi-shot 16
Smear (A 143) visible in the monitor when shooting with Multi-shot 16 enabled will be recorded
with images. Avoiding bright objects such as the sun, reflections of the sun, and electric lights when
shooting with Multi-shot 16 enabled is recommended.
E ISO Sensitivity
Set to A (Auto) M d (Shooting menu) M E ISO sensitivity
Sensitivity is a measure of how quickly the camera reacts to light. The higher the
sensitivity, the less light needed to make an exposure. Although a high ISO rating
is suited for taking pictures of subjects in action or in poor lighting, high sensitivity
is often associated with noise -randomly spaced, brightly colored pixels
concentrated in dark parts of the image.
Auto (default setting)

Sensitivity is ISO 100 in bright places; in dark places the camera automatically raises
sensitivity to a maximum of ISO 1600.
Fixed range auto
Choose the range in which the camera automatically adjusts ISO sensitivity, from
ISO 100-400 or ISO 100-800. The camera will not raise sensitivity beyond the
maximum value in the selected range. Set the maximum value for ISO sensitivity for
effective control over the amount of grain that appears in images.
100, 200, 400, 800, 1600, 3200, 6400
ISO Sensitivity will be locked at the specified value.
If ISO sensitivity is locked, Motion detection (A 126) will not function.

At settings other than Auto, the current setting is displayed in the monitor (A 6).
If Auto is selected and the sensitivity is raised above an ISO 100, the E icon will
be displayed (A 33). If Fixed range auto is selected, U + the maximum value
for ISO sensitivity will be displayed.
B Notes on ISO Sensitivity

102
F Color Options
Set to A (Auto) M d (Shooting menu) M F Color options
Make colors more vivid or record pictures in monochrome.

n Standard color (default setting)
Use for pictures exhibiting natural color.
o Vivid color
Use to achieve a vivid, photoprint effect.
p Black-and-white
Record pictures in black-and-white.
q Sepia
Record pictures in sepia tones.

r Cyanotype
Record pictures in cyan-blue monochrome.
At settings other than Standard color, the icon for the current setting is displayed
in the monitor (A 6). Monitor color tones also change depending upon the
setting.
B Notes on Color Options

103
G AF-Area Mode
Set to A (Auto) M d (Shooting menu) M G AF area mode
Choose how the focus area is determined.

When using digital zoom, the camera will focus on the subject in the center focus
area regardless of the applied AF area mode option.
a Face priority
If the camera detects a face, it focuses on the face
(Shooting with Face Priority A 106).
If the camera detects multiple faces, the camera
focuses on the face closest to the camera.
When shooting non-human subjects or when
framing the subject in such a way that a face cannot
be detected, the AF area mode becomes Auto, and 13
the camera automatically selects the focus area (up
to nine areas) containing the subject closest to the camera.

w Auto (default setting)
Camera automatically selects the focus area (one of
nine) containing the subject closest to the camera.
Press the shutter-release button halfway to activate
the focus area.
When the shutter-release button is pressed halfway,
the focus area selected by the camera will be
displayed in the monitor (up to nine areas). 13
Focus areas
x Manual
Choose the focus area from 99 areas in the screen. Focus area
This option is suited to situations in which the
intended subject is relatively still and not positioned
in the center of the frame. Rotate the rotary multi
selector or press H, I, J or K to select one of 99
focus areas displayed in the monitors focus-area
selection screen, and shoot.
To end focus-area selection and adjust the flash
mode, macro mode, self-timer and exposure
compensation settings, press the k button. To
return to the focus-area selection screen, press the Selectable areas
k button again.
104
y Center
The camera focuses on the subject in the center of
the frame.
The focus area is always positioned at the center of
the screen.
13
Focus area
B Notes on AF Area Mode

D Focus Lock

Use focus lock to focus on off-center subjects when center is selected for AF area mode.
The following steps explain the usage of focus lock when Center is selected for AF area mode.
1 Position the subject in the center of the frame.
13

Confirm that the focus area indicator is green.
Focus and exposure are locked.
1/250 F2.7
3 Continue holding down the shutter-release button halfway

and recompose the picture.
Be sure that the distance between the camera and the subject does not
change.
1/250 F2.7
4 Press the shutter-release button the rest of the way down to shoot.
D More Information
See Autofocus (A 29) for more information.
105
Shooting with Face Priority

When the camera is pointed at a face, the face is automatically detected and the
camera focuses on the face.
The face priority function will be enabled for scenarios such as the following.
Face priority is selected for AF area mode (A 104)
When Scene auto selector (A 45), Portrait (A 38) or Night portrait
(A 39) is chosen for scene mode
When using smart portrait mode (A 51)

When the camera detects a face, that face will be
framed by a yellow double border.
13
When the camera detects more than one face, operation varies, depending upon the
shooting mode, as follows.
Faces framed by a double Number of faces
Shooting mode
border to be recognized
Auto mode (Face priority) The face closest to the
camera
Scene auto selector, Portrait * The other faces are Up to 12
or Night portrait scene modes framed by a single border.
The face closest to the
camera
Smart portrait mode Up to 3
* The other faces are
framed by a single border.

The camera focuses on the face framed by the double
border. The double border will glow green and focus
will be locked.
When the camera is unable to focus on a face, the
double border will blink. Press the shutter-release
button halfway again and focus.
1/250 F2.7
Press the shutter-release button all the way down to shoot.
When using smart portrait mode, even if the shutter-release button is not pressed, the
shutter is released automatically if the camera detects that the face framed by the
double border is smiling (Smile timer) (A 53).
106
B Notes on Face Priority

When Face priority is selected for AF area mode, the setting will automatically switch to Auto if
no face is detected when the shutter-release button is pressed halfway.
If no face is recognized when the shutter-release button is pressed halfway in the Portrait or
Night portrait scene modes or smart portrait mode, the camera will focus on the subject in the
center of the frame.
Depending on shooting conditions, such as whether or not the subject is facing the camera, faces
may not be detected.
The camera may be unable to detect faces in the following situations:
- When faces are partially hidden by sunglasses or other obstructions
- When faces take up too much or too little of the frame
When there are multiple people in the frame, the face on which the camera focuses depends on a
variety of shooting conditions, such as whether or not the subject is facing the camera.
In some rare cases shooting subjects with which autofocus may not perform as expected (A 29),
the subject may not be in focus despite the fact that the double border glows green. Should this
occur, switch to auto mode and set AF area mode to Manual or Center, refocus on another
subject positioned at the same distance from the camera as the actual portrait subject, and use

focus lock (A 105).
Images that were taken using face priority will be rotated and displayed automatically according
to the orientation of the faces detected, in full-frame and thumbnail playback modes (excluding
pictures that were shot using Continuous, BSS and Multi-shot 16 (A 101)).
107
I Autofocus Mode
Set to A (Auto) M d (Shooting menu) M I Autofocus mode
Choose how the camera focuses.

A Single AF (default setting)
Camera focuses when the shutter-release button is pressed halfway.
B Full-time AF
Camera focuses continuously until the shutter-release button is pressed down
halfway. Use with moving subjects.
A sound will be heard while the camera focuses.
B Notes on Autofocus Mode

B Notes on the Autofocus Mode Setting for Subject Tracking Mode

You can set Autofocus mode for subject tracking mode. The default setting in subject tracking
mode is Full-time AF. Autofocus mode can be set independently for both subject tracking mode
and auto mode.
108
Functions that Cannot be Applied Simultaneously

Certain settings in the shooting menu cannot be used with other functions.
Restricted Functions Setting Description
If set to Continuous, BSS, or Multi-
Flash mode Continuous (A 101)
shot 16, the flash cannot be used.
When using Multi-shot 16, Image
Image mode Continuous (A 101)
mode is fixed at L Normal (2592).
Continuous Self-timer (A 34) Fixed at Single when using self-timer.
When using Multi-shot 16, ISO
ISO sensitivity Continuous (A 101) sensitivity is set automatically
according to the brightness.
When using Black-and-white, Sepia,
White balance Color Options (A 103) or Cyanotype, the White balance
setting is fixed at Auto.
When using Face priority, Autofocus
Autofocus mode AF-Area Mode (A 104)
mode is fixed Single AF.

Motion Detection When using Multi-shot 16, Motion
Continuous (A 101)
detection will not function.
If ISO sensitivity is fixed, Motion
ISO Sensitivity (A 102)
detection will not function.
If set to Continuous, BSS, or Multi-
Blink Warning Continuous (A 101) shot 16, the blink warning will not
function.
109
Playback Options: The Playback Menu
The following options are available in playback mode.
k Quick retouch A 71
Easily create retouched images in which contrast and saturation have been enhanced.
I D-Lighting A 72
Enhances brightness and contrast in dark portions of pictures.
e Skin softening A 73
Make the subjects skin appear smoother.
a Print set A 92
Select pictures to print and the number of copies for each.
b Slide show A 112
View pictures stored in the internal memory or on a memory card in an automatic
slide show.
c Delete A 113
Delete selected or all pictures.
d Protect A 113
Protect selected pictures from accidental deletion.
f Rotate image A 114
Change the orientation of an existing picture.
g Small picture A 74
Create a small copy of the current picture.
E Voice memo A 67
Record and play voice memo.
h Copy A 115
Copy files between memory card and internal memory.
Displaying the Playback Menu

Enter the playback mode by pressing the c button (A 30).
Display the playback menu by pressing the d button.
15/11/2009 15:30 Playback menu
0004.JPG Quick retouch
D-Lighting
Skin softening
Print set
Slide show
4 4 Exit
Use the rotary multi selector to choose and apply settings (A 10).
To exit the playback menu, press the d button.
110
Selecting Pictures
The picture selection screen, as shown at right, will be Erase selected images
displayed with the following menus:
Playback menu:
Select images in Print set (A 92)
Erase selected images in Delete (A 113)
Protect (A 113) Back
Rotate image (A 114)
Selected images in Copy (A 115)
Setup menu:
Select an image in Welcome screen (A 119)
Follow the procedure described below to select pictures.
1 Rotate the rotary multi selector, or press J or

Erase selected images
K to choose the desired picture.
Only one picture can be selected for Rotate image
and Welcome screen. Proceed to step 3
Rotate the zoom control to g (i) to switch to full-
frame playback, or f (h) to switch to 12 thumbnails Back
display.
2 Press H or I to select ON or OFF (or the Erase selected images

number of copies).
When ON is selected, a check mark is displayed in the
current picture. Repeat steps 1 and 2 to select
additional pictures.
Back
3 Press the k button to apply picture selection.
111
b Slide Show
Press the c button (Playback mode) M d (Playback menu) M b Slide show
View pictures stored in the internal memory or on a memory card in an automatic

slide show.
1 Use the rotary multi selector to choose Start Slide show

and press the k button. Pause
To change the interval between pictures, choose
Frame intvl, select the desired interval time, and press Start
Frame intvl
the k button before choosing Start.
Loop
To repeat the slide show automatically, enable Loop Exit
and press the k button before choosing Start. The
check mark (w) will be added to the loop option when enabled.
2
The slide show begins.

Press the rotary multi selector K while the slide show is
in progress to view images in the order recorded (hold
down to fast forward), or J to view images in reverse
order (hold down to rewind).
Press the k button to pause the slide show.
3 Choose End or Restart.

Pause
When the slide show ends or is paused, choose End
and press the k button to return to the playback
menu or choose Restart to play the slide show again.
Restart
End
Frame intvl
B Notes on Slide Show

Movies are not included in slide shows.
Slide shows play for a maximum of 30 minutes, even when Loop is selected (A 128).
112
c Delete
Press the c button (Playback mode) M d (Playback menu) M c Delete
Delete selected or all pictures.

Erase selected images
Delete selected pictures (see Selecting Pictures (A 111) for more information).
Erase all images
Delete all pictures.
B Notes on Deletion
Once deleted, pictures cannot be recovered. Transfer important images to a computer before
deletion.
pictures marked with the s icon are protected and cannot be deleted.

d Protect
Press the c button (Playback mode) M d (Playback menu) M d Protect
Protect selected pictures from accidental deletion.

Select the picture and apply the setting in the picture selection screen (see
Selecting Pictures (A 111) for more information).
Note, however, that formatting the cameras internal memory or the memory card
will permanently erase protected files (A 129).
Protected pictures are recognized by the s icon in playback mode (A 7, 58).
113
f Rotate Image
Press the c button (Playback mode) M d (Playback menu) M f Rotate image
Change the orientation of pictures played back in the cameras monitor after
shooting.
Pictures can be rotated 90 clockwise or counterclockwise.
Pictures that were recorded in the portrait (vertical) orientation can be rotated up
to 180 in either direction.
Select a picture in the picture selection screen (A 111), and press the k button
to display the Rotate image screen. Rotate the rotary multi selector or press J or
K to rotate the picture 90.
Rotate image Rotate image Rotate image
Back Rotate Back Rotate Back Rotate

Rotate 90 Rotate 90 clockwise
counterclockwise
Press the k button to set the orientation displayed, and save the orientation data
with the picture.
114
h Copy
Press the c button (Playback mode) M d (Playback menu) M h Copy
Copy pictures between the internal memory and a memory card.
1 Use the rotary multi selector to select an Copy

option from the copy screen and press the k
button.
q: Copy pictures from internal memory to
memory card.
r: Copy pictures from memory card to internal Exit
memory.
2 Select a copy option and press the k button. Camera to card

Selected images: Copy pictures selected from the Selected images

picture selection screen (A 111). All images
All images: Copy all pictures.
Exit
B Notes on Copying Pictures

JPEG-, AVI-, and WAV-format files can be copied. Files recorded in any other format cannot be
copied.
If voice memos (A 67) are attached to pictures selected for copying, voice memos are copied
with the pictures.
Pictures recorded with another make or model of camera or that have been modified on a
computer cannot be copied.
Edited copies have the same Protect (A 92) as the original, but are not marked for Print set
(A 113).
Pictures or movies copied from the internal memory or the memory card (A 64) cannot be
C Memory contains no images. Message

If there are no pictures stored on the memory card when playback mode is applied, the message,
Memory contains no images., will be displayed. Press the d button to display the copy option
screen, and copy the pictures stored in the cameras internal memory to the memory card.
D More Information
115
Basic Camera Setup: The Setup Menu
The setup menu contains the following options.
a Menus A 118
Choose how menus are displayed.
c Welcome screen A 119
Select the welcome screen that is displayed when the camera is turned on.
d Date A 120
Set camera clock and choose home and destination time zones.
e Monitor settings A 123
Adjust monitor brightness and choose display style.
f Date imprint A 124
Imprint date on pictures.
g Vibration reduction A 125
Reduce the effects of camera shake while shooting.
U Motion detection A 126
Adjust the motion detection setting to reduce the effects of camera shake and
subject movement when shooting still pictures.
h AF assist A 127
Enable or disable AF-assist illumination.
u Digital zoom A 127
Enable or disable digital zoom.
i Sound settings A 128
Adjust sound settings.
k Auto off A 128
Set time before camera enters standby mode to save power.
l/m Format memory/Format card A 129
Format internal memory or memory card.
n Language A 130
Choose language used for camera monitor display.
o Video mode A 130
Adjust settings necessary for connection to TV.
V Charge by computer A 131
Choose whether or not the battery is charged when the camera is connected
to a computer via USB cable.
d Blink warning A 132
Choose whether or not to detect blinking human subjects when shooting
pictures using face priority.
116
p Reset all A 134

Restore camera settings to default values.
r Firmware version A 136
Display camera firmware version.
Displaying the Setup Menu

Choose the z tab in the menu screen.
1 Press the d button to display the menu

screen.
When using A (auto) mode, smart portrait mode,

Shooting menu
subject tracking mode, playback mode, and movie Image mode
mode White balance

Metering
Continuous
ISO sensitivity
Exit
When using scene mode

Image mode
High (4000 )
Normal (4000)
Normal (3264)
Normal (2592)
Normal (2048)
Exit
2 Press J on the rotary multi selector. Shooting menu

For information on using the rotary multi selector, see Image mode
The Rotary Multi Selector (A 10). White balance
Tab will be selectable. Metering
Continuous
ISO sensitivity
Exit
3 Press H or I to select the z tab. Set up

Menus
Welcome screen
Date
Monitor settings
Date imprint
Exit
117
4 Press K or the k button. Set up

The setup menu options will be selectable. Menus
Use the rotary multi selector to choose and apply Welcome screen
settings (A 10). Date
Monitor settings
To exit the setup menu, press the d button, or press Date imprint
J and select another tab. Exit
a Menus
Press the d button M z (setup menu) (A 117) M a Menus
Choose how menus are displayed.

Text (default setting)
Menus are displayed in list format.

Set up
Menus
Welcome screen
Date
Monitor settings
Date imprint
Exit
Icons
All menu options can be displayed in a single page. Menu name
Menus
Exit
118
c Welcome Screen
Press the d button M z (setup menu) (A 117) M c Welcome screen
Select the welcome screen that is displayed when the camera is turned on.
None (default setting)
Welcome screen is not displayed.
COOLPIX
Displays a welcome screen.
Select an image
Select a picture in the internal memory or on the memory card for the welcome
screen. Choose a picture in the picture selection screen (A 111), and press the k
button.
As the selected picture is stored in the camera, the picture will appear in the

welcome screen even if the original picture is deleted.
Pictures taken at an Image mode setting (A 96) of 16:9, and copies created at
a size of 320 240 or smaller using the small picture (A 74) or crop (A 75)
functions, cannot be used.
119
d Date
Press the d button M z (Setup menu) (A 117) M d Date
Set the cameras internal clock.

Date
Set camera clock to current date and time.
Use the rotary multi selector to set the date and time.
Highlight an item (day, month, year, hour, minute, and the order in which day,
month, and year are displayed): Press J or K.
Edit the highlighted item: Press H or I, or rotate the rotary multi selector.
Finish setting: After selecting the order in which the day, month, and year are
displayed, press the k button (A 21).
Time zone
Set the home time zone (w) and enable or disable daylight saving time. When the
travel destination (x) is selected, the time difference (A 122) between the travel
destination and the home time zone (w) is automatically calculated and the date
and time in the selected region are recorded. Useful when travelling.
Setting the Travel Destination Time Zone
1 Use the rotary multi selector to choose Time Date

zone and press the k button.
The Time zone screen is displayed. 15/11/2009 15:30
Date
Time zone
Exit
2 Choose x Travel destination and press the Time zone

k button. 15/11/2009 15:30
The date and time displayed on the monitor changes London, Casablanca
according to the region currently selected.
Home time zone
Travel destination
Exit
120
3 Press K. Time zone

The time zone selection screen is displayed. 15/11/2009 15:30
London, Casablanca
Home time zone

Travel destination
Exit
4 Press J or K to choose the travel destination 11:30 - 04:00

time zone. EDT:
When using the camera in an area where daylight New York
saving time is in effect, press H to set the clock to Toronto
Lima
daylight saving time. When daylight saving time is
turned on, the W icon is displayed and the clock
Back
advances by one hour. To turn the setting off, press I.
Press the k button to enter the travel destination time Time zone
15/11/2009 11:30

zone.
EDT:New York
While the travel destination time zone is selected, the
Toronto, Lima
Z icon will be displayed in the monitor when the Home time zone
camera is in shooting mode. Travel destination
Exit
B Backup Battery
The cameras internal clock uses a backup battery that is independent from the cameras battery. The
backup battery is charged while the main battery is installed or while the AC adapter is connected,
and will remember the clock settings for several days after about ten hours of charging.
C w (Home Time Zone)

To switch to the home time zone, choose w Home time zone in step 2 and press the k button.
To change the home time zone, choose w Home time zone in step 2 and perform the steps for
x Travel destination to set the home time zone.
C Daylight Saving Time

When daylight saving time starts or ends, turn the daylight saving time option on or off from the
time zone selection screen displayed in step 4.
D Imprinting the Date on Pictures

After setting the date and time, set the Date imprint setting in the setup menu (A 124). Once
Date imprint is set, the shooting date and time can be imprinted on the image data when taking
pictures.
121
D Time Zones (A 21)

The camera supports the time zones listed below.
For time differences not listed below, set the camera clock using Date.
UTC +/- Location UTC +/- Location

-11 Midway, Samoa +1 Madrid, Paris, Berlin
-10 Hawaii, Tahiti +2 Athens, Helsinki, Ankara
Moscow, Nairobi, Riyadh,
-9 Alaska, Anchorage +3
Kuwait, Manama
PST (PDT): Los Angeles,
-8 +4 Abu Dhabi, Dubai
Seattle, Vancouver
-7 MST (MDT): Denver, Phoenix +5 Islamabad, Karachi
CST (CDT): Chicago, Houston,
-6 +5.5 New Delhi
Mexico City
EST (EDT): New York, Toronto,
-5 +6 Colombo, Dhaka
Lima
-4 Caracas, Manaus +7 Bangkok, Jakarta

Beijing, Hong Kong,
-3 Buenos Aires, Sao Paulo +8
Singapore
-2 Fernando de Noronha +9 Tokyo, Seoul
-1 Azores +10 Sydney, Guam
0 London, Casablanca +11 New Caledonia
+12 Auckland, Fiji
122
e Monitor Settings
Press the d button M z (Setup menu) (A 117) M e Monitor settings
Change the settings for the options below.

Photo info
Choose information displayed in the monitor during shooting and playback mode.
Brightness
Choose from five settings for monitor brightness. The default setting is 3.
Photo Info
The following display options are available.
See The Monitor (A 6) for information on indicators in the monitor.
During Shooting During Playback

15/11/2009 15:30
0004.JPG
Show info
13 4 4
Auto info The current settings or operation guide is displayed as in Show info
(default setting) above. After a few seconds, display will be the same as Hide info.
Hide info
15/11/2009 15:30
0004.JPG
13 4 4
Framing grid + In A (auto) mode, a framing grid is The current settings or operation
Auto info displayed to help frame pictures; guide is displayed, as in Auto info
other current settings or operation above.
guide is displayed for a few
seconds, as in Auto info above.
In other shooting modes, the
current settings or operation guide
is displayed, as in Auto info above.
123
f Date Imprint
Press the d button M z (Setup menu) (A 117) M f Date imprint
The shooting date and time can be imprinted in pictures

at the time of shooting. This information can be printed
even from printers that do not support printing of date
and time (A 94).
15.11.2009
Off (default setting)

Date and time are not imprinted on pictures.
Date
The date is imprinted in pictures.
Date and time

The date and time are imprinted in pictures.
At settings other than Off, the icon for the current setting is displayed in the
monitor during shooting (A 6).
B Date Imprint
Imprinted dates form a permanent part of image data and cannot be deleted.
Dates imprinted at an Image mode (A 96) setting of TV screen (640) may be difficult to read.
Choose PC screen (1024) or larger when using date imprint.
The date is recorded using the format selected in the setup menus Date option (A 20, 120).
Dates cannot be imprinted in the following situations.
- When using the Panorama assist scene mode
- Movie mode
C Date Imprint and Print Set

When printing from DPOF-compatible printers which support printing of shooting date and photo
information, the date and information can be printed on pictures without date and time imprinted
on them, using options in the Print set option (A 92).
124
g Vibration Reduction
Press the d button M z (Setup menu) (A 117) M g Vibration reduction
Reduce the effects of camera shake while shooting. Vibration reduction effectively
corrects blur, caused by slight hand movement known as camera shake, that
commonly occurs when shooting with zoom applied or at slow shutter speeds.
Set vibration reduction to Off when using a tripod to stabilize the camera during
shooting.
On (default setting)
Vibration reduction is enabled when shooting still pictures and recording movies.
Camera detects and factors out panning movements when reducing camera
shake. When camera is panned horizontally, for example, vibration reduction
reduces only vertical shake. If camera is panned vertically, vibration reduction
affects only horizontal shake.

Off
Vibration reduction is disabled.
When vibration reduction is enabled, the current setting is displayed during

shooting (when Off is selected, an icon for the current setting is not displayed)
(A 6, 25).
B Notes on Vibration Reduction

Vibration reduction may take a few seconds to activate after the power is turned on, or the camera
enters shooting mode from playback mode. Wait until the display stabilizes before shooting.
Due to characteristics of the vibration reduction function, images displayed in the cameras
monitor immediately after shooting may appear blurry.
Vibration reduction may be unable to completely eliminate the effects of camera shake in some
situations.
125
U Motion Detection
Press the d button M z (Setup menu) (A 117) M U Motion detection
Enable motion detection to reduce the effects of camera shake and subject
movement when shooting still pictures.
When camera detects the movement of the subject or camera shake, the shutter
speed will be increased for reducing the effects of them.
However, motion detection does not function in the following situations.
When the flash fires
In auto mode, when ISO sensitivity (A 102) is fixed
In auto mode, when Multi-shot 16 is set (A 101)
In the following scene modes: Sport (A 39), Night portrait (A 39),
Fireworks show (A 43), and Backlight (A 43)
When subject tracking mode is selected
Off
Motion detection is disabled.
The motion detection setting can be confirmed in the monitor while shooting
(A 6, 25).
The motion detection icon will glow green when the camera detects any vibration
and increases the shutter speed. When Off is selected, the icon for the current
setting is not displayed.
B Notes on Motion Detection

Motion detection may be unable to completely reduce the camera shake and subject movement
in some situations.
Motion detection may not function if the subject exhibits significant movement or is too dark.
Pictures taken using motion detection may be somewhat grainy.
126
h AF Assist
Press the d button M z (Setup menu) (A 117) M h AF assist
Enable or disable AF-assist illumination.

AF-assist illumination will be used to assist the focus operation when the subject is
poorly lit. The illuminator has a range of about 3.0 m (9 ft. 10 in.) at the maximum
wide-angle position and about 1.0 m (3 ft. 3 in.) at the maximum telephoto
position. However, note that for some scene modes, AF-assist illumination turns
off automatically (A 38 to 44) even if Auto is set.
Off
Disable this function. The camera may be unable to focus if lighting is poor.

u Digital Zoom
Press the d button M z (Setup menu) (A 117) M u Digital zoom
Enable or disable digital zoom.
On (default setting)
When the camera is zoomed in to the maximum optical zoom position, rotating
and hold the zoom control at g (i) triggers digital zoom (A 27).
Off
Digital zoom will not be activated (except when shooting a movie).
B Notes on Digital Zoom

When using digital zoom, AF area mode is set to Center and cannot be changed (A 104).
Digital zoom cannot be used in the following situations.
- When Scene auto selector, Portrait or Night portrait is selected for scene mode
- When smart portrait mode is selected
- When subject tracking mode is selected
- When Multi-shot 16 is selected (A 101)
- Before movie recording begins (digital zoom of up to 2 can be applied while movies are being
recorded)
When using digital zoom, Metering is set to Center-weighted.
127
i Sound Settings
Press the d button M z (Setup menu) (A 117) M i Sound settings
Adjust the following sound settings.

Button sound
Turn button sound On (default setting) or Off. A beep will sound once when
operations are completed successfully, twice when the camera acquires focus on
the subject, and three times when error is detected. Start-up sound will also play
when the camera is turned on.
Shutter sound
Choose shutter sound from On (default setting) or Off.
k Auto Off
Press the d button M z (Setup menu) (A 117)M k Auto off
If no operations are performed for the selected length of time, the monitor will
turn off and the camera enters standby mode (A 19) to reduce drain on the
batteries. The power-on lamp blinks in standby mode. If no operations are
performed for another three minutes, the camera will turn off automatically.
Choose the time allowed to elapse before the camera enters standby mode if no
operations are performed from 30 s, 1 min (default setting), 5 min, and 30 min.
C Canceling Standby Mode

Standby mode is canceled when the following buttons are pressed.
Power switch
Shutter-release button
C Notes on Auto Off

Regardless of the option selected, the monitor will remain on as follows.
While a menu is displayed: If auto off is set to 30 s or 1 min, it is extended to 3 minutes.
Slide show playback: maximum of 30 minutes
AC Adapter EH-62F is connected: 30 minutes
128
l/m Format Memory/Format Card

Press the d button M z (Setup menu) (A 117) M l Format memory/
m Format card
Use this option to format the internal memory or a memory card.

Formatting the Internal Memory Format memory
To format the internal memory, remove the memory All images will
be deleted! OK?
card from the camera. The Format memory option
appears in the setup menu. No
Format
Exit
Formatting a Memory Card Format card

When the memory card is inserted in the camera, the All images will
be deleted! OK?

Format card option appears in the setup menu.
No
Format
Exit
B Formatting Internal Memory and Memory Cards

Formatting the internal memory or memory cards permanently deletes all data. Be sure to transfer
important pictures to a computer before formatting.
Do not turn the camera off, disconnect the AC adapter, or open the battery-chamber/memory
card slot cover during formatting.
The first time you insert the memory cards used in other devices into this camera, be sure to
format them with this camera.
129
n Language
Press the d button M z (Setup menu) (A 117) M n Language
Choose one of 24 languages for display of camera menus and messages.

Czech Polish
Danish Portuguese
German Russian
(default setting) Finnish
Spanish Swedish
Greek Turkish
French Arabic
Indonesian Simplified Chinese
Italian Traditional Chinese
Hungarian Japanese
Dutch Korean
Norwegian Thai
o Video Mode
Press the d button M z (Setup menu) (A 117) M o Video mode
Adjust settings for connection to TV.

Choose from NTSC or PAL.
130
V Charge by Computer
Press the d button M z (Setup menu) (A 117) M V Charge by computer
Choose whether or not the battery inserted in the camera is charged when the
camera is connected to a computer via USB cable (A 84).
When the camera is connected to a computer that is running, the battery inserted
into the camera is automatically charged using power supplied by the computer.
Off
The battery inserted into the camera is not charged when the camera is connected
to a computer.
B Notes on Connecting the Camera to a Printer

The battery cannot be charged with connection to a printer, even if the printer complies with the
PictBridge standard.
When Auto is selected for Charge by computer, it may be impossible to print pictures with
direct connection of the camera to some printers. If the PictBridge startup screen is not displayed
in the monitor after the camera is connected to a printer and turned on, turn the camera off and
disconnect the USB cable. Set Charge by computer to Off and reconnect the camera to the
printer.
131
d Blink Warning
Press the d button M z (Setup menu) (A 117) M d Blink warning
Choose whether or not blinking eyes are detected when using face priority
(A 106) in the following shooting modes.
A (auto) mode (when AF area mode is set to Face priority) (A 106)
Scene auto selector (A 38), Portrait (A 38), or Night portrait (A 39)
scene modes
On
When the camera detects that one or more human subjects have closed their eyes
shortly after recognizing the faces and shooting them, the Did someone blink?
screen will appear on the monitor.
The face of the human subject that may have closed his/her eyes is framed by a
yellow border. You can check the picture taken and determine if you need to take
the picture again.

Operating the Did someone blink? Screen (A 133)
Off (default setting)
Blink warning doesnt take effect.
B Note on Blink warning

When continuous is set to Continuous, BSS, or Multi-shot 16, blink warning does not function.
132
Operating the Did someone blink? Screen

The following operations can be performed when the
Did someone blink?
Did someone blink? screen is displayed.
If no operations are performed for a few seconds, the
screen automatically returns to the shooting mode
screen.
Exit
To Use Description
Enlarge and display Zoom increases each time the zoom control is rotated
g (i)
the detected face to g (i).
f (h) Rotate the zoom control to f (h).
playback
If the camera detects more than one human subject

Select the face to be
blinking, press J or K during playback zoom to display
displayed

other faces.
Delete the picture

l Press the l button.
taken
k
The camera returns
Press the k button or the shutter-release button.
to shooting mode.
133
p Reset All
Press the d button M z (Setup menu) (A 117) M p Reset all
When Reset is selected, the cameras settings will be restored to their default
values.
Pop-up Menu
Option Default value

Flash mode (A 32) Auto
Self-timer (A 34) OFF
Macro mode (A 35) OFF
Exposure compensation (A 36) 0.0
Shooting in the Scene Mode


Scene setting for shooting mode (A 37) Scene auto selector
White balance setting in food mode (A 47) Center
Smart Portrait Menu

Skin softening (A 52) Normal
Smile timer (A 53) On
Blink proof (A 52) Off
Subject Tracking Menu

Autofocus mode (A 56) Full-time AF
Face priority tracking (A 56) On
Movie Menu
Movie options (A 77) TV movie 640
Autofocus mode (A 77) Single AF
134
Shooting Menu
Image mode (A 96) I Normal (4000)
White balance (A 98) Auto
Metering (A 100) Matrix
Continuous (A 101) Single
ISO sensitivity (A 102) Auto
Color options (A 103) Standard color
AF area mode (A 104) Auto
Autofocus mode (A 108) Single AF
Setup Menu

Menus (A 118) Text
Welcome screen (A 119) None
Photo info (A 123) Auto info
Brightness (A 123) 3
Date imprint (A 124) Off
Vibration reduction (A 125) On
Motion detection (A 126) Auto
AF assist (A 127) Auto
Digital zoom (A 127) On
Button sound (A 128) On
Shutter sound (A 128) On
Auto off (A 128) 1 min
Charge by computer (A 131) Auto
Blink warning (A 132) Off
135
Others

Paper size (A 88, 89) Default
Slide show (A 112) 3s
Choosing Reset all also clears the current file number (A 139) from the
memory. Numbering will continue from the lowest number available. To reset
file numbering to 0001, delete all pictures (A 113) before selecting Reset all.
The following items remain unaffected when the camera is reset with Reset all.
Shooting menu:
Preset manual data (A 99) acquired for White balance
Setup menu:
Date (A 120), Language (A 130), and Video mode (A 130)
r Firmware Version
Press the d button M z (Setup menu) (A 117) M r Firmware version
View the current camera firmware version.
COOLPIX S640 Ver.X.X
Back
136
Technical Notes
Optional Accessories
Rechargeable battery Rechargeable Li-ion Battery EN-EL12

Charging AC Adapter Charging AC Adapter EH-68P/EH-68P (AR)1
Battery charger Battery Charger MH-65
AC Adapter EH-62F (connect as shown)
AC adapter
Insert the AC adapter cord into the groove deeply in the battery
chamber before closing the battery-chamber/memory card slot
cover. If part of the cord runs out of the groove, the cover or cord
may be damaged when the cover is closed.
USB cable USB Cable UC-E6
A/V cable Audio Video Cable EG-CP14
1 When using in other countries, use a third-party plug adapter as necessary. For more
information about plug adapters, consult your travel agency.
Technical Notes
137
Optional Accessories
Approved Memory Cards

The following Secure Digital (SD) memory cards have been tested and approved
for use in this camera.
All cards of the designated make and capacity can be used, regardless of speed.
SanDisk 512 MB, 1 GB, 2 GB1, 4 GB2, 8 GB2, 16 GB2
TOSHIBA 512 MB, 1 GB, 2 GB1, 4 GB2, 8 GB2, 16 GB2
Panasonic 512 MB, 1 GB, 2 GB1, 4 GB2, 8 GB2, 16 GB2
Lexar 1 GB, 2 GB1, 4 GB2, 8 GB2
1 If the memory card will be used with a card reader or similar device, check that device
supports 2 GB cards.
2 SDHC-compliant. If the memory card will be used with a card reader or similar
device, check that device supports SDHC.
Operation is not guaranteed with other makes of card. Contact the manufacturer
for details on the above cards.
Refer to the Nikon website for the latest information on approved cards.
Technical Notes
138
File and Folder Names
Pictures, movies, and voice memos are assigned file names as follows.
DSCN0001.JPG
Identifier (not shown on camera monitor) Extension (signifies the file type)
Original still pictures (voice Still pictures .JPG
memo attachment DSCN Movies .AVI
included), movies
Voice memos .WAV
Small copies (voice memo
SSCN
attachment included)
Cropped copies (voice File number (assigned automatically in
RSCN
memo attachment included) ascending order, starting with 0001)
Quick Retouch, D-Lighting,
and Skin softening copies
FSCN
(voice memo attachment
included)
Files are stored in folders named with a folder number followed by a five-
character identifier: P_ plus a three-digit sequence number for pictures shot
using Panorama assist (e.g. 101P_001; A 49), and NIKON for all other
pictures (e.g. 100NIKON). When the number of files within a folder reaches
9999, a new folder will be created. File numbers will be assigned automatically
starting with 0001.
Voice memo file names have the same identifier and file number as the picture
to which the voice memo is attached.
Files copied using Copy > Selected images is copied to the current folder,
Technical Notes
where they are assigned new file numbers in ascending order starting from the
largest file number in memory. Copy > All images copies all folders from the
source medium; file names do not change but new folder numbers are
assigned in ascending order, starting from the largest folder number on the
destination medium (A 115).
A single folder can hold up to 200 pictures; if the current folder already contains
200 pictures, a new folder, named by adding one to the current folder name,
will be created the next time a picture is taken. If the current folder is numbered
999 and contains 200 pictures, or a picture is numbered 9999, no further
pictures can be taken until the internal memory or memory card is formatted
(A 129), or a new memory card is inserted.
139
Caring for the Camera
To ensure continued enjoyment of this Nikon product, observe the following
precautions when using or storing the device.
B Keep dry
The device will be damaged if immersed in water or subjected to high humidity.
B Do not drop
The product may malfunction if subjected to strong shock or vibration.
B Handle the lens and all moving parts with care

Do not apply force to the lens, lens cover, monitor, memory card slot or battery chamber. These
parts are easily damaged. Applying force to the lens cover could result in camera malfunction or
damage to the lens. Should the monitor break, care should be taken to avoid injury caused by
broken glass and to prevent the liquid crystal from the display touching the skin or entering the eyes
or mouth.
B Do not point the lens at strong light sources for extended periods
Avoid pointing the lens at the sun or other strong light sources for extended periods when using or
storing the camera. Intense light may cause deterioration of the CCD image sensor, producing a
white blur effect in photographs.
B Keep away from strong magnetic fields

Do not use or store this device in the vicinity of equipment that generates strong electromagnetic
radiation or magnetic fields. Strong static charges or the magnetic fields produced by equipment
such as radio transmitters could interfere with the monitor, damage data stored on the memory
card, or affect the products internal circuitry.
B
Technical Notes
Avoid sudden changes in temperature

Sudden changes in temperature, such as when entering or leaving a heated building on a cold day,
can cause condensation to form inside the device. To prevent condensation, place the device in a
carrying case or a plastic bag before exposing it to sudden changes in temperature.
B Turn the product off before removing or disconnecting the power source
Do not remove the battery while the product is on, or while images are being recorded or deleted.
Forcibly cutting power in these circumstances could result in loss of data or in damage to product
memory or internal circuitry.
140
C The Battery
Check the battery level when taking the camera out, and charge the battery if necessary. Do not
continue charging once the battery is fully charged, as this will result in reduced battery
performance. If possible, carry a fully-charged spare battery when taking pictures on important
occasions.
Do not use the battery at ambient temperatures below 0 C (32 F) or above 40 C (104 F). Failure
to observe this precaution could damage the battery or impair its performance.
Charge the battery in an indoor environment that is between 5 and 35 C (41 to 95 F).
When charging the battery by connecting the COOLPIX S640 to the Charging AC Adapter EH-68P/
EH-68P (AR) or to a computer, the chargeable capacity may decrease when the battery
temperature is between 45 to 60 C (113 to 140 F). The battery will not charge if its temperature is
below 0 C (32 F) or above 60 C (140 F).
If an exhausted battery is used at a low temperature, the camera may not turn on. Be sure that the
battery is fully charged and spare batteries are prepared before heading outside to take pictures in
cold weather. Keep spare batteries in a warm place and exchange as necessary. Once warmed, a
cold battery that could not be used temporarily due to lowered performance may recover some of
its charge.
Should the battery terminals become dirty, the camera may not turn on due to poor contact. Wipe
the terminals off with a clean, dry cloth before use.
If the battery will not be used for some time, insert it in the camera and run it flat before removing
it for storage. Attach the included terminal cover to the battery and store it in a cool location with
an ambient temperature of 15 to 25 C (59 to 77 F). Do not store the battery in hot or extremely
cold locations.
While the battery is in storage, charge it at least once every six months and then use the camera to
run it flat again before storing it in a cool location.
Always remove the battery from the camera or battery charger when it is not being used. Left
installed, minute amounts of current flow even when unused, and the battery may become
excessively drained and no longer function.
Technical Notes
A marked drop in the time a fully-charged battery retains its charge, when used at room
temperature, indicates that the battery needs to be replaced. Purchase a new battery.
Replace the battery when it no longer holds a charge. Used batteries are a valuable resource.
Please recycle used batteries in accordance with local regulations.
141
Cleaning
Avoid touching glass parts with your fingers. Remove dust or lint with a blower
(typically a small device with a rubber bulb attached to one end that is
pumped to produce a stream of air out the other end). To remove fingerprints
Lens or other stains that cannot be removed with a blower, wipe the lens with a soft
cloth, using a spiral motion that starts at the center of the lens and working
toward the edges. If this fails, clean the lens using a cloth lightly dampened
with commercial lens cleaner.
Remove dust or lint with a blower. To remove fingerprints and other stains,
Monitor
clean the monitor with a soft, dry cloth, being careful not to apply pressure.
Use a blower to remove dust, dirt or sand, then wipe gently with a soft, dry
cloth. After using the camera at the beach or seaside, wipe off any sand or salt
Body with a dry cloth lightly dampened with fresh water, then dry thoroughly. Note
that foreign matter inside the camera could cause damage not covered by the
warranty.
Do not use alcohol, thinner, or other volatile chemicals.
Technical Notes
142
Storage
Turn the camera off when not in use. Check that the power-on lamp is off before
putting the camera away. Remove the battery if the camera will not be used for an
extended period. Do not store the camera with naphtha or camphor moth balls, or
in any of the following locations:
Next to equipment that produces strong electromagnetic fields, such as
televisions or radios
Exposed to temperatures below -10 C (14 F) or above 50 C (122 F)
Poorly ventilated or subject to humidities of over 60 %
To prevent mold or mildew, take the camera out of storage at least once a month.
Turn the camera on and release the shutter a few times before putting the camera
away again.
Technical Notes
C Notes on the Monitor
The monitor may contain a few pixels that are always lit or that do not light. This is a characteristic
common to all TFT LCD displays, and does not indicate a malfunction. Images recorded using the
product will not be affected.
Images in the monitor may be difficult to see under bright lighting.
The monitor is lit by an LED backlight. Should the monitor begin to dim or flicker, contact your
Nikon-authorized service representative.
C Notes on Smear
White or colored streaks of light may be visible in the monitor with framing of bright subjects. This
phenomenon, known as smear, occurs when extremely bright light strikes the image sensor. This is
due to characteristics of the image sensor and does not indicate a malfunction. Smear may also
cause partial discoloration in monitor display with shooting.
Smear does not affect recorded images except when shooting with Continuous set to Multi-shot
16 and when recording movies. When shooting in these modes, avoiding bright objects such as the
sun, reflections of the sun, and electric lights is recommended.
143
Error Messages
The following table lists the error messages and other warnings displayed in the
monitor, as well as the solutions for dealing with them.
Display Problem Solution A

O (blinks) Clock not set. Set clock. 120
Battery is running Prepare to charge or change
B 14, 16
low. battery.
N
Battery exhausted. Charge or replace battery. 14, 16
Battery exhausted.
Turn off camera, and allow battery
to cool down before resuming
use. After five seconds, this
message will disappear, the
P monitor will turn off, and the
Battery temperature
Battery temperature power-on lamp will blink rapidly. 19
is high.
high After the lamp blinks for three
minutes, the camera will turn off
automatically, but you can also
press the power switch to turn it
off manually.
Camera cannot Refocus. 28, 29
Q (blinks red)
focus. Use focus lock. 105
Camera cannot
P
perform other Wait until message clears from
Please wait for the
operations until display automatically when
camera to finish
recording is recording is complete.
recording.
complete.
Technical Notes
N
Write-protect switch Slide the write-protect switch to
Memory card is write 23
is in lock position. write position.
protected.
P
This card cannot be Use an approved card. 138
used. Check that connectors are 22
Error accessing
clean.
P memory card.
Confirm that memory card is 22
This card cannot be correctly inserted.
read.
144
Error Messages

All data stored on the memory
card will be deleted. If there is any
P
data on the card that you want to
Card is not formatted. Memory card has not
keep, select No, and backup the
Format card? been formatted for 23
data to a computer before
No use in this camera.
formatting the memory card. To
Yes
format the memory card, select
Yes and press the k button.
Choose smaller image mode. 96
Delete unnecessary images. 30, 78,
N 113
Memory card is full.
Out of memory. Replace memory card. 22
Remove memory card and use 22
internal memory.
Error occurred while Format internal memory or
129
recording picture. memory card.
Replace the memory card, or
Camera has run out
format the internal memory/ 139
of file numbers.
memory card.
The following pictures cannot be
P used.
Image cannot be saved. Picture cannot be Pictures taken at an Image
used for welcome mode setting of 16:9 119
screen. Pictures created using the small
picture or crop functions that
are 320 240 or smaller in size
Technical Notes
There is insufficient
Delete pictures from destination. 113
space to save a copy.
The image file Choose an image that was 68
P
cannot have any taken using this camera.
Sound file cannot be
voice memos Voice memos cannot be
saved.
attached to it. attached onto movies.
Someone may have
N
had their eyes closed
A blink was detected in Check results in playback mode. 30, 53
when the picture
the picture just taken.
was taken.
Confirm the conditions that are 69
N
Cannot edit selected required for editing.
Image cannot be
picture. These options cannot be used
modified.
with movies.
N Time out error while Choose memory card with faster
22
Cannot record movie. recording movie. write speed.
145
Error Messages

Pictures stored in the internal 22
memory can only be viewed if
no memory card is inserted.
No pictures in the To copy files from internal 115
internal memory or memory to memory card, press
memory card. the d button to display the
Copy screen, then copy the
N files from internal memory to
Memory contains no memory card.
images.
No pictures are
contained in the Select a folder containing the
64
folder selected in the sorted pictures.
auto sort mode.
No pictures can be Play back the pictures using the
played back in the playback mode or the list by date 65
auto sort mode. mode.
N
File contains no image File cannot be viewed on this
data. camera. View file using the
File not created with
computer or any other devices
P this camera.
which was used to create or edit
This file cannot be this file.
played back.
The picture cannot
N
be played back in a 112
All images are hidden.
slide show.
N
Technical Notes
This image cannot be Picture is protected. Disable protection. 113

deleted.
N
Destination in same
Travel destination is in 122
time zone as home.
the current time zone.
Turn camera off and then on
Lens error again. If error persists, contact
Lens error. 24
Q retailer or Nikon-authorized
service representative.
Error occurred
P during Turn camera off and reconnect
86
Communications error communication with cable.
printer.
146
Error Messages

Turn camera off, remove and
Error has occurred in reinsert battery, and turn camera
System error
cameras internal on. If error persists, contact retailer 14, 19
Q
circuitry. or Nikon-authorized service
representative.
Check printer. After solving the
PR
problem, select Resume and
Printer error: check Printer error.
press the k button to resume
printer status.
printing. *
PR Specified size of Load the specified type of paper,
Printer error: check paper is not loaded select Resume and press the k
paper in printer. button to resume printing. *
Remove the jammed paper, select
PR Paper has jammed in
Resume and press the k button
Printer error: paper jam the printer.
to resume printing. *
PR Load the specified type of paper,
No paper is loaded in
Printer error: out of select Resume and press the k
the printer.
paper button to resume printing. *
Check ink, select Resume and
PR
Ink error. press the k button to resume
Printer error: check ink
printing. *
Replace ink, select Resume and
PR Ink cartridge is
press the k button to resume
Printer error: out of ink empty.
printing. *
An error caused by
PR Select Cancel and press the k
Technical Notes
the image file has
Printer error: file corrupt button to cancel printing.
occurred.
* See the documentation provided with your printer for further guidance and information.
147
Troubleshooting
If the camera fails to function as expected, check the list of common problems
below before consulting your retailer or Nikon-authorized service representative.
Refer to the page numbers in the right-most column for more information.
Display, Settings and Power Supply
Problem Cause/Solution A
Camera is off. 19
Battery is exhausted. 24
Standby mode for saving power: press the power 13, 19
switch or the shutter-release button.
When flash lamp blinks red, flash is charging. Wait 33
Monitor is blank.
until charging has finished.
Camera is connected to computer via USB cable. 80
Camera and TV are connected via audio/video cable. 79
The camera cannot be turned on while connected to 16
an electrical outlet via the Charging AC Adapter.
Monitor is hard to Adjust monitor brightness. 123
read. Monitor is dirty. Clean monitor. 140
Camera has turned off automatically to save power. 128
Battery is cold. 141
Camera turns off The camera turns off if it is connected to the Charging 16
without warning. AC Adapter while it is turned on.
The camera turns off if the USB cable is disconnected 81, 82, 86
while the camera is connected to a computer or
printer. Connect the USB cable again.
Technical Notes
Pictures recorded while the clock is not set (Date not 20, 120
set indicator blinks during shooting) will have a time
stamp of 00/00/0000 00:00; movies will be dated
Date and time of
01/01/09 00:00. Set the correct date and time using
recording are not
Date in the setup menu. Set the correct date and
correct.
time using Date in the setup menu.
Check camera clock regularly against more accurate 120
timepieces and reset as required.
No information Hide info is selected for Photo info of the Monitor
123
displayed in monitor. settings option in the setup menu.
Date imprint not
Date has not been set. 20, 120
available.
Date not appearing
on pictures even A shooting mode that does not support date imprint is
124
when Date imprint is selected.
enabled.
148
Troubleshooting
Backup battery is exhausted; all settings were restored
Camera settings reset. 121
to their default values.
Battery temperature is high. Turn off camera, and allow
Monitor turns off, and battery to cool down before resuming use. After the
the power-on lamp lamp blinks for three minutes, the camera will turn off 19
blinks rapidly. automatically, but you can also press the power switch
to turn it off manually.
The battery is not charged when the camera is turned
off.
Battery inserted into Charging stops if the computer enters sleep mode
the camera is not while the battery is charging. The camera may be
charged when the turned off. 84
camera is connected Depending upon computer specifications, settings,
to a computer. and power supply and allocation, it may be
impossible to charge the battery inserted into the
camera via computer connection.
Technical Notes
149
Troubleshooting
Electronically Controlled Cameras

In extremely rare instances, unusual characters may appear in the monitor and the
camera may stop functioning. In most cases, this phenomenon is caused by a
strong external static charge. Turn the camera off, remove and replace the battery,
then turn the camera on again. In the event of continued malfunction, contact
your retailer or Nikon-authorized service representative. Note that disconnecting
the power source as described above may result in the loss of any data not
recorded to internal memory or the memory card at the time the problem
occurred. Data already recorded will not be affected.
Shooting
When camera is in playback mode, press the A 8, 30
No picture taken button.
when shutter-release When menus are displayed, press the d button. 12
button is pressed. Battery is exhausted. 24
When flash lamp blinks red, flash is charging. 33
The intended subject is one with which autofocus 29
does not perform well.
Camera cannot focus.
Set AF assist in the setup menu to Auto. 127
Turn camera off and then on again. 19
Use flash. 32
Use vibration reduction and motion detection. 125, 126
Pictures are blurred. Use D (Best Shot Selector). 101
Technical Notes
Use a tripod to stabilize the camera (use with the self- 34

timer for best results).
Smear may occur when the lens is aimed at bright
Streaks of light or subjects. When using the multi-shot 16 shooting and
partial discoloration movie modes, we recommend that you avoid shooting 102, 143
appear in the display. when direct sunlight, reflected sunlight, or electric
lights are in the display.
Bright specks appear
in pictures shot using Flash is reflecting off particles in air. Turn flash W (off). 33
flash.
Flash is W (off). 32
Some scene modes that cannot turn on flash are 38
selected.
Flash does not fire. Smart portrait mode selected, with Blink proof set 53
to On.
D mode is selected. 76
Another function that is set now is restricting the flash. 109
150
Troubleshooting
Optical zoom cannot
Optical zoom cannot be used while recording movies. 76
be used.
Digital zoom is set to Off in the setup menu. 127
Digital zoom cannot be used in the following
situations.
- When Scene auto selector, Portrait or Night 38, 39, 45
portrait is selected for scene mode
Digital zoom cannot
- When subject tracking mode is selected 54
be used.
- When smart portrait mode is selected 51
- When Multi-shot 16 is selected for Continuous 101
- Before movie recording begins (digital zoom of up 76
to 2 can be applied while movies are being
recorded)
Image mode not Another function that is set now is restricting Image
109
available. mode.
Off is selected for Shutter sound of the Sound 128
settings option in the setup menu.
Continuous, BSS, or Multi-shot 16 is selected for 101
No sound when Continuous in shooting menu.
shutter is released. When Sports, or Museum is selected in scene mode. 39, 42
Blink proof is set to On for smart portrait mode. 52
D mode is selected. 76
Do not block the speaker. 4, 26
Off is selected for AF assist in the setup menu. 127
AF-assist illuminator
AF-assist illuminator turns off automatically in some 38 43
does not light.
scene modes.
Technical Notes
Pictures appear
Lens is dirty. Clean lens. 140
smeared.
Colors are unnatural. White balance does not match light source. 98
The subject is dark, so shutter speed is too slow or ISO
Randomly spaced sensitivity is too high. Noise can be reduced by:
bright pixels (noise) Use flash. 32
appear in image. Specifying a lower ISO sensitivity setting. 102
Using a scene mode which has noise reduction ability. 38
Flash is W (off). 32
Flash window is blocked. 26
Subject is beyond flash range. 32
Pictures are too dark
Adjust exposure compensation. 36
(underexposed).
Raise the ISO sensitivity. 102
Subject is backlit. Use Backlight or change the flash 32, 43
mode to X (fill flash).
Pictures are too bright
Adjust exposure compensation. 36
(overexposed).
151
Troubleshooting
When V (auto with red-eye reduction) or fill flash
with slow sync and red-eye reduction of the Night
Unexpected results
portrait scene mode is applied during shooting, In-
occurred when flash is
Camera Red-Eye Fix may, in very rare cases, be applied 32, 39
set to auto with red-
to areas not affected by red-eye. Set a flash mode other
eye reduction.
than V (auto with red-eye reduction) and select a
scene mode other than Night portrait, then shoot.
Skin softening may not produce the desired results 53
Skin softening results depending on shooting conditions.
are not as expected. For pictures with four or more faces, try using Skin 73
softening in the playback menu.
It may take more time to save images in the following
situations.
Saving images takes When the noise reduction function is in operation 33, 38
time. When flash is set to V (auto with red-eye 33
reduction)
When using skin softening while shooting 38, 39, 52
Playback
File cannot be played File was overwritten or renamed by computer or

back. another make or model of camera.
Technical Notes
Playback zoom cannot be used with movies, small

Cannot zoom in on
pictures, or cropped copies smaller than 320 240
picture.
pixels.
Voice memos cannot be attached to movies. 78
Voice memos cannot be attached to pictures taken 67
Cannot record voice
by other cameras. Voice memos that are attached to
memo.
the picture using other cameras cannot be played
back on this camera.
These options cannot be used with movies. 78
These options cannot be used with pictures taken when 96
Cannot use quick P 16:9 (3968) is applied in the Image mode setting.
retouch, D-Lighting, Select pictures that support quick retouch, 69
skin softening, small D-Lighting, skin softening, small picture, or crop.
picture, or crop Pictures taken with another make or model of camera 69
options cannot be edited.
Other cameras may be unable to play back, or transfer 69
to a computer, pictures edited with this camera.
152
Troubleshooting
The Video mode setting in setup menu has not 130
been set correctly.
Pictures not displayed
Memory card contains no pictures. Replace memory 22
on television.
card. Remove memory card to play back pictures
from internal memory.
The picture you want to display is sorted in another 64
folder.
Pictures recorded by another camera, and pictures 115
copied using Copy on another camera cannot be
The recorded pictures
are not displayed in
Pictures in the internal memory or memory card may
auto sort mode.
not be displayed if overwritten on a computer.
Up to 999 images can be added to each folder in the 65
auto sort mode. If the desired folder already contains
999 pictures, new pictures cannot be added.
Camera is off. 19
USB cable is not correctly connected. 81
Camera is not recognized by the computer.
Nikon Transfer does
Confirm that the operating system used is 80
not start when
compatible with the camera.
camera is connected.
Computer is not set to launch Nikon Transfer 83
automatically.
For more information on Nikon Transfer, refer to help
information contained in Nikon Transfer.
With some PictBridge-compatible printers, the
The PictBridge startup
PictBridge startup screen may not be displayed and it
Technical Notes
screen is not
may be impossible to print pictures when Auto is
displayed when the 131
selected for the Charge by computer option in the
camera is connected
setup menu. Set the Charge by computer option to
to a printer.
Off and reconnect the camera to the printer.
Memory card contains no pictures. Replace memory
Pictures to be printed card.
22
are not displayed. Remove memory card to print pictures from internal
memory.
Paper size cannot be selected from the camera in the
following situations, even for PictBridge compatible
printers. Use the printer to select page size.
Cannot select paper
The page size selected using the camera is not 88, 89
size with camera.
compatible with the printer.
A printer that automatically sets the paper size is
being used.
153
Specifications
Nikon COOLPIX S640 Digital Camera
Type Compact digital camera

Effective pixels 12.2 million
Image sensor 1/2.33-in. CCD; approx. 12.39 million total pixels
Lens 5 optical zoom, NIKKOR lens

Focal length 5.0-25.0mm (equivalent with 35mm [135] format picture angle:
28-140mm)
f/-number f/2.76.6
Construction 7 elements in 6 groups
Digital zoom Up to 4 (equivalent with 35mm [135] format picture angle:
approx. 560mm)
Vibration reduction Lens shift
Autofocus (AF) Contrast-detect AF
[W]: Approx. 45 cm (1 ft. 6 in.) to , [T]: Approx. 70 cm (2 ft.
Focus range (from 4 in.) to
lens) Macro mode: Approx. 2 cm (0.8 in.) to (wide-end zoom
position)
Focus-area selection Face priority, auto (9-area automatic selection), manual with 99
focus areas, center
Monitor 2.7-in., approx. 230k-dot, wide viewing angle TFT LCD with
anti-reflection coating and 5-level brightness adjustment
Frame coverage
(shooting mode) Approx. 100% horizontal and 100% vertical
Frame coverage
(playback mode) Approx. 100% horizontal and 100% vertical
Technical Notes
Storage
Media Internal memory (approx. 45 MB), SD (Secure Digital) memory cards
File system DCF, Exif 2.2, and DPOF compliant
Still pictures: JPEG
File formats Movies: AVI (Motion-JPEG compliant)
Sound files: WAV
40003000 High (4000P)/Normal (4000)
32642448 Normal (3264)
Image size 25921944 Normal (2592)
(pixels) 20481536 Normal (2048)
1024768 PC screen (1024)
640480 TV screen (640)
39682232 16:9 (3968)
ISO sensitivity ISO 100, 200, 400, 800, 1600, 3200, 6400
(Standard output Auto (auto gain from ISO 100 to 1600)
sensitivity) Fixed range auto (ISO 100 to 400, 100 to 800)
154
Specifications
Exposure
Metering 224-segment matrix, center-weighted
Programmed auto exposure with motion detection and
Exposure control
exposure compensation (2.0 to +2.0 EV in steps of 1/3 EV)
[W]: 1.1 to +15.4 EV
Range (ISO 100)
[T]: 1.6 to 18.1 EV
Shutter Mechanical and charge-coupled electronic shutter
1/1500 -8 s (when ISO sensitivity is set to 100, 200, 400)
1/1500 -2 s (when ISO sensitivity is set to 800)
Speed 1/1500 -1 s (when ISO sensitivity is set to Auto, 1600, 3200)
1/1500 -1/2 s (when ISO sensitivity is set to 6400)
4 s (Fireworks show scene mode)
Aperture Electronically-controlled ND filter (2 AV) selection
Range 2 steps (f/2.7 and f/5.4 [W])
Self-timer Can be selected from 10 and 2 seconds duration
Built-in flash
Range (approx.) [W]: 0.5 to 8.0 m (1 ft. 8 in. to 26 ft.)
(ISO sensitivity: Auto) [T]: 0.5 to 4.0 m (1 ft. 8 in. to 13 ft.)
Flash control TTL auto flash with monitor preflashes
Interface Hi-Speed USB
Data transfer protocol MTP, PTP
Video output Can be selected from NTSC and PAL
I/O terminal Audio/video output; digital I/O
Arabic, Chinese (Simplified and Traditional), Czech, Danish,
Technical Notes
Dutch, English, Finnish, French, German, Greek, Hungarian,
Supported languages
Indonesian, Italian, Japanese, Korean, Norwegian, Polish,
Portuguese, Russian, Spanish, Swedish, Thai, Turkish
One Rechargeable Li-ion Battery EN-EL12 (supplied)
Power sources
AC Adapter EH-62F (optional)
Approx. 4 hours (when using Charging AC Adapter EH-68P/
Charging time
EH-68P (AR) and when no charge remains)
Battery life* Approx. 270 shots (EN-EL12)
Approx. 91 55 20.5 mm (3.6 2.2 0.8 in.) (excluding
Dimensions (W H D)
projections)
Weight Approx. 110 g (4.0 oz) (without battery and SD memory card)
Operating environment
Temperature 0 to 40 C (32 to 104 F)
Humidity Less than 85 % (no condensation)
155
Specifications
Unless otherwise stated, all figures are for a camera with a fully-charged
Rechargeable Li-ion Battery EN-EL12 operated at an ambient temperature of
25 C (77 F).
* Based on Camera and Imaging Products Association (CIPA) standards for measuring the life
of camera batteries. Measured at 23 (2) C (73 (4) F); zoom adjusted with each shot,
flash fired with every other shot, image mode set to I Normal (4000). Battery life may
vary depending on shooting interval and length of time menus and images are displayed.
Rechargeable Li-ion Battery EN-EL12

Type Rechargeable lithium-ion battery
Rated capacity DC 3.7 V, 1050 mAh
Operating temperature 0 to 40 C (32 to 104 F)
Dimensions (W H D) Approx. 32 43.8 7.9 mm (1.3 1.7 0.3 in.)
Weight Approx. 22.5 g (0.8 oz) (excluding terminal cover)
Charging AC Adapter EH-68P/EH-68P (AR)

Rated input AC 100-240 V, 50/60 Hz, 0.065-0.04 A
Rated capacity 6.59.6 VA
Rated output DC 5.0 V, 0.5 A
Operating temperature 0 to 40 C (32 to 104 F)
EH-68P: Approx. 55 22 65 mm (2.7 0.9 2.6 in.)
Dimensions (W H D)
EH-68P (AR): Approx. 55 51.6 66 mm (2.2 2.0 2.6 in.)
EH-68P: Approx. 60g (2.1 oz)
Weight
EH-68P (AR): 65 g (2.3 oz)
Technical Notes
B Specifications
Nikon will not be held liable for any errors this manual may contain.
The appearance of this product and its specifications are subject to change without notice.
156
Specifications
Supported Standards
DCF: Design Rule for Camera File System is a standard widely used in the digital
camera industry to ensure compatibility among different makes of camera.
DPOF: Digital Print Order Format is an industry-wide standard that allows
pictures to be printed from print orders stored on the memory card.
Exif version 2.2: This camera supports Exif (Exchangeable Image File Format
for Digital Still Cameras) version 2.2, a standard that allows information stored
with photographs to be used for optimal color reproduction when images are
output from Exif-compliant printers.
PictBridge: A standard developed cooperatively by the digital camera and
printer industries, allowing photographs to be output directly to a printer
without connecting the camera to a computer.
Technical Notes
157
Index
Symbols Autofocus mode 56, 77, 108
R 50 AV cable 79, 137
k Apply selection button 10 B
A Auto mode 24 Backlight o 43
F Auto sort mode 64 Battery 14, 16, 121
l Delete button 30, 31, 68, 78 Battery chamber 5
o Exposure compensation 36 Battery charger 18, 137
m Flash mode 32 Battery latch 14
j Help 13 Battery level indicator 24
C List by date mode 61 Battery-chamber/memory card slot cover
p Macro mode 35 14, 22
d Menu button 12 Beach/snow g 40
D Movie mode 76 Best shot selector 101
c Playback button 9, 30 Black-and-white 103
c Playback mode 30 Blink proof 53
i Playback zoom 60 Blink warning 132, 133
C Scene mode 37 BSS 101
n Self timer 34 Built-in flash 32
z Setup menu 116 Button sound 128
A Shooting mode button 8 C
a Smart portrait mode 51 Cable connector 79, 80, 85
s Subject tracking mode 54 Calendar display 59
g Tele 27 Center-weighted 100
h Thumbnail Playback 57, 59 Charge by computer 131
f Wide 27 Charge lamp 17
Technical Notes
.AVI 139 Charger 16, 137

.JPG 139 Charging AC Adapter 16, 137
.WAV 139 Close-up k 42
A Color options 103
AC adapter 137 Compression ratio 96
AF area mode 104 Computer 80
AF assist 127 Connector cover 5
Aperture 28 Continuous 101
Audio/video cable 79, 137 Copy n 43
Audio/video-in jack 79 Crop 75
Auto 32 Cyanotype 103
Auto mode 24 D
Auto off 128 Date 20, 120
Auto sort mode 64 Date imprint 124
Autofocus 55, 77, 108 Daylight saving time 20, 121
158
Index
Delete 30, 68, 78, 113 Image copy 115

Digital zoom 27, 127 Image mode 96, 97
D-Lighting 72 Image size 96
DPOF 157 Internal memory 22
DPOF print 91 Internal memory indicator 25
DSCN 139 ISO sensitivity 33, 102
Dusk/dawn i 41 L
E Lamp indicator 5
EH-68P/EH-68P (AR) 16 Landscape c 38
EN-EL12 16 Language 130
Exposure compensation 36 Lens 4, 154
Extension 139 Lens cover 4
Eyelet for camera strap 5 Li-ion rechargeable battery 14
F List by date menu 63
Face priority 104 List by date mode 61
Face priority tracking 56 Lithium-ion type battery 16, 137
File name 139 M
Fill flash 32 Macro mode 35
Fireworks show m 43 Matrix 100
Firmware version 136 Memory capacity 24
Fixed range auto 102 Memory card 22, 138
Flash lamp 33 Memory card slot 22
Flash mode 32, 33 Menus 118
Flash off 32 Metering 100
Focus 28, 77, 104 Microphone 4
Technical Notes
Focus indicator 6, 28 Monitor 6, 142
Focus lock 105 Monitor brightness 123
Folder name 139 Monitor display settings 123
Food u 42, 47 Monitor settings 123
Format 23, 129 Motion detection 25, 126
Format the internal memory 129 Movie length 77
Formatting 23, 129 Movie menu 77
FSCN 139 Movie mode 76
Full-frame playback 30, 31 Movie playback 78
Full-time AF 77, 108 Movie recording 76
H Movie settings 77
Help 13 Multi-shot 16 101
Histogram 10, 36 Museum l 42
I N
Identifier 139 Night landscape j 41
159
Index
Night portrait e 39 Self-timer lamp 34, 51

Nikon Transfer 80, 81 Sepia 103
Number of exposures remaining 24, 97 Setup menu 116
O Shooting 24, 26, 28
Optical zoom 27 Shooting info 10
Optional accessories 137 Shooting menu 95
P Shooting with Face Priority 106
Panorama assist p 44, 49 Shooting-mode selection menu 8
Panorama Maker 80, 83 Shutter button 13, 28
Paper size 88, 89 Shutter sound 128
Party/indoor f 40 Shutter speed 28
PictBridge 85, 157 Single 101
Playback 30, 57, 59, 60, 68, 78 Single AF 77, 108
Playback menu 110 Skin softening 52
Playback mode 30 Slide show 112
Playback zoom 60 Slow sync 32
Playback-mode selection menu 9 Small picture 74
Portrait b 38 Small size 77
Power 19, 20, 24 Smart portrait menu 52
Power switch 19, 20, 24 Smart portrait mode 51
Preset manual 99 Smile timer 53
Press halfway 13 Software Suite 80
Print 88, 89, 92 Sound settings 128
Print set 92 Speaker 4
Print Set Date Option 93, 94 Sports d 39
Technical Notes
Printer 85 SSCN 139

Protect 113 Standard color 103
Q Strap 13
Quick retouch 71 Subject Tracking Menu 56
R Subject tracking mode 54
Sunset h 40
Rechargeable battery 137
Red-eye reduction 32, 33 T
Reset all 134 Tele 27
Rotary multi selector 20 Television 79
Rotate image 114 Thumbnail display 57
RSCN 139 Time difference 122
S Time zone 120, 122
Scene auto selector x 38, 45 Tripod socket 5
TV Movie 77
Scene mode 37, 38
Self-timer 34
160
Index
U
USB cable 81, 86, 137
V
Vibration reduction 25, 125
Video mode 130
ViewNX 82
Vivid color 103
Voice memo 67
Volume 68, 78
W
Welcome screen 119
White balance 98
Wide 27
Z
Zoom control 27
Technical Notes
161
162
No reproduction in any form of this manual, in whole or in part
(except for brief quotation in critical articles or reviews), may be
made without written authorization from NIKON CORPORATION.
Printed in Europe
CT9G01(11)
6MM70511-01

User's Manual: Digital Camera

Uploaded by

Copyright:

Available Formats

User's Manual: Digital Camera

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

User's Manual: Digital Camera

Uploaded by

Copyright:

Available Formats

DIGITAL CAMERA

A Basic Photography and Playback: Auto Mode

C Shooting Suited for the Scene

Taking Pictures of Smiling Faces

Focusing on a Moving Subject in Subject

c More on Playback/In-Camera Editing

Connecting to Televisions, Computers and Printers

d Shooting, Playback and Setup Menus

Observe caution when Observe the following

Use appropriate cables Do not operate the flash with

Notice for customers in Canada

First Steps ............................................................................................................................................. 14

A Basic Photography and Playback: Auto Mode ................................................................. 24

Exposure Compensation ...................................................................................................................36

C Shooting Suited for the Scene................................................................................................ 37

F Taking Pictures of Smiling Faces (Smart Portrait Mode) .............................................. 51

s Focusing on a Moving Subject in Subject Tracking Mode........................................... 54

c More on Playback/In-Camera Editing ................................................................................. 57

Connecting to Televisions, Computers and Printers ............................................................ 79

d Shooting, Playback and Setup Menus ............................................................................. 95

a Menus ............................................................................................................................................................. 118

This icon marks cautions,

This icon indicates that more

For users in Europe and Africa: http://www.europe-nikon.com/support/

Use Only Nikon Brand Electronic Accessories

Holographic seal: Identifies this

Before Taking Important Pictures

About the Manuals

Notice Concerning Prohibition of Copying or Reproduction

Disposing of Data Storage Devices

Lens cover closed

Zoom control..................................................27 4 Built-in microphone............................67, 76

3 A (shooting mode) button .................... 8 11 k (apply selection) button................... 10

Charge lamp ............................................17, 84 12 Eyelet for camera strap............................. 13

1 Date of recording .........................................20 9 Internal memory indicator ..................... 30

Press the A button in shooting mode to display

Shooting-mode Selection Menu

While the shooting-mode selection menu is displayed, press the A button to

The c (playback) Button

Playback-mode Selection Menu

While the playback-mode selection menu is displayed, press the c button to

The Rotary Multi Selector

Display m (flash mode) (A 32) menu

Rotate to select an item*

Display p (macro mode) (A 35) menu

Choose the previous Display histogram and

Choose the option above*

* Options can also be chosen by rotating the rotary multi selector.

C Note on the Rotary Multi Selector

Use the rotary multi selector to navigate the menus

Displayed when there are one or more menu options to follow

Displayed when Shooting menu AF area mode

Switching Between Tabs

Pressing the Shutter-Release Button Halfway/All the Way

Press the shutter- Press the shutter-

Attaching the Camera Strap

1 Open the battery-chamber/memory card slot

battery-chamber/memory card slot cover (2).

2 Insert the battery.