Scribd
Upload
1K views3 pages

Install Instruction

This document provides installation instructions for several automotive diagnostic software programs: 1. PP2000 is software for Peugeot that installs from "InstPC.exe". 2. LEXIA3 is software for Citroen that requires creating a blank "version.txt" file in C:\ before installing from "instlex3.exe". 3. Both programs require activation using the same LEXIA3_KEYGEN tool and inputting a PC number and server code. 4. Diagbox can work with both Peugeot and Citroen but will overlap the other software if installed. It installs from "Diagbox_setup.exe" and requires running "patchV6

Uploaded by

Daniel Rosemberg
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
1K views3 pages

Install Instruction

This document provides installation instructions for several automotive diagnostic software programs: 1. PP2000 is software for Peugeot that installs from "InstPC.exe". 2. LEXIA3 is software for Citroen that requires creating a blank "version.txt" file in C:\ before installing from "instlex3.exe". 3. Both programs require activation using the same LEXIA3_KEYGEN tool and inputting a PC number and server code. 4. Diagbox can work with both Peugeot and Citroen but will overlap the other software if installed. It installs from "Diagbox_setup.exe" and requires running "patchV6

Uploaded by

Daniel Rosemberg
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 3

Make sure your PC is XP 32 bit OS ,Please dont unzip the installing files to disk C or

desktop .

PP2000 is the Software for Peugeot !


Click InstPC.exe to install
LEXIA3 is the Software for Citroen !
Click Instlex3.exe to install

*Important Note:
Please create a blank txt file named version in C:\ before installation of LEXIA3,

otherwise it will display a warning as follow:


LEXIA3 Installation

1. creat version.txt in c:\


2. install LEXIA_V45 , Activate software with the Keygen ,
Copy Lexia45.rar to your disk and unzip it (please note:dont unzip it to C disk or desktop) ,Click
instlex3.exe (not setup.exe) to install, After install , Run the
softwareC:\APPLIC\LCTLEX3\lctlex3.exe and LEXIA3_KEYGEN.exe activation tool for
LEXIA3 (same tool as the pp2000)
1>. Custome code: 001
2>. Software Version Number: LEXIA-345
Attention: Please DO NOT iuput Other Version number such as LEXIA3-345.12 !
3>. Input the right identifier of your pc number & Server request code that you get in the LEXIA3
activetion page

3. Run the Lexia_update_V347.19.exe , Active it as by using LEXIA3_KEYGEN.exe,Change the


software version Number: LEXIA-347)

PP2000 installation:

1. Creat version.txt in c:\


2. install PP2000_09B
CopyPP2000_09B.rar to your disk and unzip it (please note:dont unzip it to C disk or desktop)
,ClickInstPC.exe(not setup.exe) to install, After install ,Run C:\APP\LctPC\LctPC.exe ,active
the software by using PPS2000_KEYGEN.exe a activation tool for PP2000-22.14 / 2214 / V1.8.2
(same tool for LEXIA3)
1). Custome code: 001
2). Version Number: PP2000-22
*Attention: Please DO NOT iuput Other Version number such as PP2000-22.14, PP2000-V22 !!!!!
3). Input the right identifier of your pc number & Server request code that you get in the PP2000
activation page

3. Run the PP2000_update_V24.21.exe


4. Activate the software using Keygen as before (Change the software version Number: PP2000-24)

Diabox V6.01 Installation

Software LEXIA-V45/47 is used for Citroen ,Software PP2000 is used for Peugeot , Diagbox can be
work with both two kind cars .If you install diagbox , software LEXIA3 and PP2000 will be overlapped.

1. Copy 'patchV6.exe' to 'C:\' or subfolder


2. Install DiagBox V6.01 (If you have some function problem with this version ,please use Diagbox
V5.29) Don't try to activate after install, If you see this error , Diagbox is not UNICODE program, you
need to change PC language. (Control panel Regional and Language Options Advanced
Select English USA )

Copy DiagBox V6.01.isoto your disk and unzip it(please note:dont unzip it to C disk or
desktop),ClickDiagbox_setup.exe to install , You also can install MagicISO Virtual CD-
DVDROM first or use other Virtual DVDROM to mount the fileDiagbox V6.01.iso to install
3. Run 'patchV6.exe' (you must have successfull message)
4. Activate the DiagBox (choose code customer, input: 1234567 OK input
12345678901234567890123456789011 and 20FFF000 ok)
5. After update you must run again 'patchV6.exe'

PS: If need a code(VIN/RPO) when using , Just input any numbers until full with the inputbox.

You might also like