Order this document

SEMICONDUCTOR TECHNICAL DATA by BC212/D

 
 
PNP Silicon
 
COLLECTOR  
3

2
BASE

1
EMITTER

1
MAXIMUM RATINGS 2
3
BC BC BC
Rating Symbol 212 213 214 Unit CASE 2904, STYLE 17
Collector Emitter Voltage VCEO 50 30 30 Vdc TO92 (TO226AA)

Collector Base Voltage VCBO 60 45 45 Vdc

Emitter Base Voltage VEBO 5.0 Vdc
Collector Current Continuous IC 100 mAdc
Total Device Dissipation @ TA = 25C PD 350 mW
Derate above 25C 2.8 mW/C
Total Device Dissipation @ TC = 25C PD 1.0 Watts
Derate above 25C 8.0 mW/C
Operating and Storage Junction TJ, Tstg 55 to +150 C
Temperature Range

THERMAL CHARACTERISTICS
Characteristic Symbol Max Unit
Thermal Resistance, Junction to Ambient RqJA 357 C/W
Thermal Resistance, Junction to Case RqJC 125 C/W

ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted)

Characteristic Symbol Min Typ Max Unit
Collector Emitter Breakdown Voltage BC212 V(BR)CEO 50 Vdc
(IC = 2.0 mAdc, IB = 0) BC213 30
BC214 30
Collector Base Breakdown Voltage BC212 V(BR)CBO 60 Vdc
(IC = 10 mA, IE = 0) BC213 45
BC214 45
Emitter Base Breakdown Voltage BC212 V(BR)EBO 5 Vdc
(IE = 10 mAdc, IC = 0) BC213 5
BC214 5
CollectorEmitter Leakage Current BC212 ICBO 15 nAdc
(VCB = 30 V) BC213 15
BC214 15
EmitterBase Leakage Current BC212 IEBO 15 nAdc
(VEB = 4.0 V, IC = 0) BC213 15
BC214 15

Motorola SmallSignal Transistors, FETs and Diodes Device Data 1

Motorola, Inc. 1996
  

ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted) (Continued)

Characteristic Symbol Min Typ Max Unit

ON CHARACTERISTICS
DC Current Gain hFE
(IC = 10 Adc, VCE = 5.0 Vdc) BC212 40
BC213 40
BC214 100

(IC = 2.0 mAdc, VCE = 5.0 Vdc) BC212 60

BC213 80
BC214 140 600

(IC = 100 mAdc, VCE = 5.0 Vdc)(1) BC212, BC214 120

BC213 140
Collector Emitter Saturation Voltage VCE(sat) Vdc
(IC = 10 mAdc, IB = 0.5 mAdc) 0.10
(IC = 100 mAdc, IB = 5.0 mAdc)(1) 0.25 0.6
Base Emitter Saturation Voltage VBE(sat) 1.0 1.4 Vdc
(IC = 100 mAdc, IB = 5.0 mAdc)
BaseEmitter On Voltage VBE(on) 0.6 0.62 0.72 Vdc
(IC = 2.0 mAdc, VCE = 5.0 Vdc)

DYNAMIC CHARACTERISTICS
Current Gain Bandwidth Product fT MHz
(IC = 10 mAdc, VCE = 5.0 Vdc, f = 100 MHz) BC212 280
BC214 320
BC213 360
CommonBase Output Capacitance Cob 6.0 pF
(VCB = 10 Vdc, IC = 0, f = 1.0 MHz)
Noise Figure NF dB
(IC = 0.2 mAdc, VCE = 5.0 Vdc,
RS = 2.0 k , f = 1.0 kHz) BC214 2
(IC = 0.2 mAdc, VCE = 5.0 Vdc,
RS = 2.0 k, f = 1.0 kHz, f = 200 Hz) BC212, BC213 10
SmallSignal Current Gain hfe
(IC = 2.0 mAdc, VCE = 5.0 Vdc, f = 1.0 kHz) BC212 60
BC213 80
BC214 140
BC212B 200 400

1. Pulse Test: Tp 300 s, Duty Cycle 2.0%.

2 Motorola SmallSignal Transistors, FETs and Diodes Device Data

   

2.0 1.0
VCE = 10 V TA = 25C
hFE, NORMALIZED DC CURRENT GAIN 1.5 0.9
TA = 25C VBE(sat) @ IC/IB = 10
0.8

V, VOLTAGE (VOLTS)
1.0 0.7 VBE(on) @ VCE = 10 V
0.6
0.7
0.5
0.5 0.4
0.3

0.3 0.2
VCE(sat) @ IC/IB = 10
0.1
0.2 0
0.2 0.5 1.0 2.0 5.0 10 20 50 100 200 0.1 0.2 0.5 1.0 2.0 5.0 10 20 50 100
IC, COLLECTOR CURRENT (mAdc) IC, COLLECTOR CURRENT (mAdc)

Figure 1. Normalized DC Current Gain Figure 2. Saturation and On Voltages

f T, CURRENTGAIN BANDWIDTH PRODUCT (MHz)

400 10
300 Cib
7.0
200

C, CAPACITANCE (pF)
150 VCE = 10 V 5.0 TA = 25C
TA = 25C
100
80 3.0
60 Cob
2.0
40
30

20 1.0
0.5 1.0 2.0 3.0 5.0 10 20 30 50 0.4 0.6 1.0 2.0 4.0 6.0 10 20 30 40
IC, COLLECTOR CURRENT (mAdc) VR, REVERSE VOLTAGE (VOLTS)

Figure 3. CurrentGain Bandwidth Product Figure 4. Capacitances

1.0 150
r b, BASE SPREADING RESISTANCE (OHMS)
hob, OUTPUT ADMITTANCE (OHMS)

0.5 VCE = 10 V
f = 1.0 kHz 140
0.3 VCE = 10 V
TA = 25C f = 1.0 kHz
130 TA = 25C

0.1
120
0.05
0.03
110

0.01 100
0.1 0.2 0.5 1.0 2.0 5.0 10 0.1 0.2 0.3 0.5 1.0 2.0 3.0 5.0 10
IC, COLLECTOR CURRENT (mAdc) IC, COLLECTOR CURRENT (mAdc)

Figure 5. Output Admittance Figure 6. Base Spreading Resistance

Motorola SmallSignal Transistors, FETs and Diodes Device Data 3

  

PACKAGE DIMENSIONS

NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
A B
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. CONTOUR OF PACKAGE BEYOND DIMENSION R
IS UNCONTROLLED.
R 4. DIMENSION F APPLIES BETWEEN P AND L.
DIMENSION D AND J APPLY BETWEEN L AND K
P MINIMUM. LEAD DIMENSION IS UNCONTROLLED
IN P AND BEYOND DIMENSION K MINIMUM.
L
SEATING F
PLANE K INCHES MILLIMETERS
DIM MIN MAX MIN MAX
A 0.175 0.205 4.45 5.20
D B 0.170 0.210 4.32 5.33
C 0.125 0.165 3.18 4.19
J D 0.016 0.022 0.41 0.55
X X F 0.016 0.019 0.41 0.48
G G 0.045 0.055 1.15 1.39
H H 0.095 0.105 2.42 2.66
SECTION XX J 0.015 0.020 0.39 0.50
V C K 0.500 12.70
L 0.250 6.35
N 0.080 0.105 2.04 2.66
1 N P 0.100 2.54
R 0.115 2.93
N V 0.135 3.43

STYLE 17:
CASE 02904 PIN 1. COLLECTOR
2. BASE
(TO226AA) 3. EMITTER
ISSUE AD

Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit,
and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different
applications. All operating parameters, including Typicals must be validated for each customer application by customers technical experts. Motorola does
not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in
systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of
the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such
unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless
against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part.
Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer.

How to reach us:

USA/EUROPE: Motorola Literature Distribution; JAPAN: Nippon Motorola Ltd.; TatsumiSPDJLDC, Toshikatsu Otsuki,
P.O. Box 20912; Phoenix, Arizona 85036. 18004412447 6F SeibuButsuryuCenter, 3142 Tatsumi KotoKu, Tokyo 135, Japan. 0335218315

MFAX: [email protected] TOUCHTONE (602) 2446609 HONG KONG: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park,
INTERNET: http://DesignNET.com 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 85226629298

4 Motorola SmallSignal Transistors, FETs and Diodes Device Data


BC212/D
This datasheet has been downloaded from:

www.DatasheetCatalog.com

Datasheets for electronic components.