1 Download the latest driver

3 Connect the camera Intended use

USB 3 uEye ML Installation www.ueyesetup.com IDS industrial cameras are to be used to capture
images for visualization and image processing
SS tasks.
Please note that free registration or login is required to
Click to start: download IDS Software Suite. Safety instruction

You can download the latest software for your uEye On connection, the driver installation starts Read carefully the information in our online
www.ueyesetup.com camera from www.ueyesetup.com. All files are packed automatically. manual* before installing and using the product.
in ZIP archives.
LED red: No driver loaded. The producer is not responsible for damages and
Get support For a Windows installation you can choose the full injury, which can occur due to false handling of
[email protected] software setup or the smaller Drivers only package. LED flashes green 2x: USB 2.0 port detected.
the product and ignoring the safety instructions.
LED flashes green 3x: USB 3.0 port detected.
All warranty will be spoiled in this case.
LED green: Driver is loaded. Camera ready.
If the product is modified or changed the CE, FCC
and/or UL approval becomes invalid. In this case
Welcome

Congratulations on purchasing a uEye camera!
2 Install the software
4 Capture images the customer is responsible for ensuring product
confirmity.
This product is not a toy and should be kept and
Read these short instructions and see how easy it is to
setup your new uEye camera. operated out of reach of children.
Keep packaging material like films away from
children. In case of abuse there is a risk of
Manuals
Software to operate your uEye camera can be found suffocation.
For detailed information on this model and the software via Start > All Programs > IDS.
Extract the ZIP archive and start the setup (.exe file). Only operate the product under ambient
please go to IDS > uEye > Help after the installation You can now choose to install the complete software or Use the IDS Camera Manager to configure all
on your PC or go to Manuals on www.ids-imaging.com. connected uEyecameras. conditions described in our online manual* for
define a customized setup.
each product.
Select 1. Complete to install all drivers with demo With uEye Cockpit (Windows)/uEye Demo (Linux)
applications and manuals. you can change camera settings and capture and Before starting up, check if the electrical wiring
save images. corresponds to the specifications in our online
manual*.
Lay cables in such way that no one can step on or
they do not represent a trip hazard.

uEye System requirements Pin assignment of 8-pin connector The product is not authorized for use in security
(Hirose HR 25) relevant applications. If it is used in security
PC with Intel i5 or better relevant applications, the customer is responsi-
Free USB 3.0 port (Super Speed) 1 Ground (GND) 1
4 3 2 ble for the necessary approvals.
2 Flash output with optocoupler (-)
Memory: min. 2 GB 3 General purpose I/O (GPIO) 1 7 6 5
Disk space: min. 500 MB 8
* http://en.ids-imaging.com/manuals-ueye.html
4 Trigger input with optocoupler (-)
www.ids-imaging.com
5 Flash output with optocoupler (+)
Operating system: Pins View
6 General purpose I/O (GPIO) 2
Windows 7 SP1/8/8.1/10 (32/64-bit) on camera
7 Trigger input with optocoupler (+)
Linux > Kernel 3.4 (32/64-bit) 8 Output supply voltage, 5 V (100 mA)

05/2016