Other executions

SD5/1- N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 70
Its available only with one working section and it can be used in hydraulic cir-
cuits where carry--over doesnt required.
H For controls, spool positioning and valves, refer to directional valve with paral-
lel circuit.

SD5/1- D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 71
Its available only with one working section and it can be used in hydraulic cir-
cuits where carry--over is required.
H For controls and spool positioning refer to directional valve with parallel circuit.
H Configurations with service and auxiliary valves arent available

SD5- S: with series circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 72

Available from 2 to 6 sections, it can be used in systems wich one downstream
section from series connection must work with upstream ones at the same time.
H On the same body are possible more than one connection.
H Its not available the carry--over circuit.
H For controls, spool positioning and valves, refer to directional valve with paral-
lel circuit.

SD5- SP: with tandem circuit . . . . . . . . . . . . . . . . . . . . . . . . . page 74

Available from 2 to 6 sections, for security reasons it can be used in systems
which is required to prohibit engagement of downstream sections from tandem
connection when the upstream sections are working.
H On the same body are possible more than one connection.
H For controls, spool positioning and valves, refer to directional valve with paral-
lel circuit.
Dimensional data

105.5 63.5 5
4.15 2.50 0.20
14 73 45
0.55 2.87 1.77

0.33
8.5
1.34
34

3.19
103
4.06
81
7.32
186

2.01
51

spool out
45.5
1.79

1
24
0.45

0.79
11.5

20

15
0
1.81
46

15
24
M8
2

24.5 30 27 24.5
0.96 1.18 1.06 0.96 3
90 spool in
3.54

Hydraulic circuit Performance data

Pressure drop curve
A1 B1
15 (psi)
(bar) 200

10 150
P PA(B)
T
Pressure

100
PT
5
50

A(B)T
0
0 15 30 45 60
Flow (l/min)
Dimensional data (parallel circuit)

Carry--over 63,5 5
20,5 2.50 0.20
12,5 0.81 45
0.06 1.77

0.33
8,5
1.34
34

4.06
3.19
103
7.32

81
186

2.01
51

spool out
45,5
1.79

3
0.45
11,5

1
24
0.79
20

15
0
1.77
45

M8 15
24
2
23 30 37 27 24,5
0.91 1.18 1.46 1.06 0.96
90 3
3.54 spool in

E F Weight E F Weight
TYPE TYPE
mm in mm in kg lb mm in mm in kg lb
SD5/1--P 100.5 3.96 73 2.87 3.5 7.7 SD5/5--P 248.5 9.78 221 8.70 10.1 22.3

SD5/2--P 137.5 5.41 110 4.33 5.2 11.5 SD5/6--P 285.5 11.24 258 10.16 11.7 25.8

SD5/3--P 174.5 6.87 147 5.79 6.9 15.2 SD5/7--P 322.5 12.70 295 11.61 13.2 29.1

SD5/4--P 211.5 8.33 184 7.24 8.1 17.9

 Outlet port options
Its possible to have open centre, closed centre and carry--over.
Unloader valves are available: these valves need special bodies with appropriate cavity on lateral outlet port, the tank connection
T must be on top.

AET: open centre (standard)

See page 9.

AE: with carry-- over AEK: closed centre

Wrench 22 --42 Nm / 31 lbft

Allen wrench 8 --42 Nm / 31 lbft

G3/8

20.5 2.5
0.81 0.1

A1 B1 A2 B2 A1 B1 A2 B2

T T

P P

120 120
1750 1750

Description example: SD5/2--P(KG3--120)/18L/18L/AE Description example: SD5/2--P(KG3--120)/18L/18L/AEK

With hydraulic pilot unloader valve type L

For safety reasons its provided with pilot port plugged.
T
Pressure drop curve A2 B2
10 12
0.39 (psi)
(bar)
150
X
9
Pressure

X 100
6
G1/4

3 50

Wrench 24
42 Nm / 31 lbft 0
0 10 20 30 40 45
Flow (l/min)
Operating features Description example:
Internal leakage . . . . . . . . . . . . . . . . . : 10 cm3/min a 100 bar SD5/2--P(JG3--120)/18L/18L/AET--L
: 0.61 in3/min at 1450 psi
Working conditions

This catalogue shows technical specifications and diagrams measured with mineral oil of 46 mm2/s -- 46 cSt viscosity at 40C tempera-
ture.

Nominal flow rating 45 l/min

Operating pressure (max.) parallel pr tandem circuit 315 bar 4600 psi
series circuit 250 bar 3600 psi
Max. back pressure on outlet port T 25 bar 360 psi
Internal leakage A(B)T p=100 bar -- 1450psi with fluid and valve at 40C 3 cm3/min 0.18 in 3/min
Hydraulic fluid Mineral base oil
Fluid temperature with NBR seals from --20 to 80C
with FPM seals from --20 to 100C
Viecosity operating range from 15 to 75 mm2/s from 15 to 75 cSt
minimum 12 mm2/s 12 cSt
maximum 400 mm2/s 400 cSt
Max. level of contamination 19/16 -- ISO 4406
with mechanical, pneumatic and hydraulic devices from --40 to 60C
Ambient temperature
with electric devices from --20 to 60C
NOTE -- For different conditions please contact Sales Dept.

Standard threads

REFERENCE STANDARDS
BSP UN--UNF METRIC NPTF
THREAD ISO 228/1 ISO 263 ISO 262 ANSI B1.20.3
ACCORDING TO BS 2779 ANSI B1.1 unified

CAVITY ISO 1179 11926 9974--1

ACCORDING TO SAE J1926 J2244 J476a
DIN 3852--2 3852--1
shape X o Y shape X o Y

PORTS THREAD
MAIN PORTS BSP UN--UNF METRICA
IInlet P and carry--over C G 3/8 3/4--16 (SAE 8) M18x1,5
Ports A and B G 3/8 9/16--18 (SAE 6) M18x1,5
G 3/8 M18x1,5
Outlet T 3/4--16 (SAE 8)
G 1/2 * M22x1,5 *
CONTROL PILOT PORTS
Pneumatics NPTF 1/8--27 NPTF 1/8--27 NPTF 1/8--27
Hydraulics G 1/4 9/16--18 (SAE 6) G 1/4
(*) -- Only for series circuit..