Scribd
Upload
207 views4 pages

Design of Restrained Slab (Bs 8110) : Mid-Span

This document provides a summary of the design of a restrained slab according to BS 8110. Key details include: - The slab is for the second floor and has one short edge that is discontinuous. - Dimensions include a short span of 5m, long span of 8m, and thickness of 150mm. - Loading includes dead loads of 7.2 kN/m2 and live loads of 2.5 kN/m2 for a total load of 14.08 kN/m2. - Reinforcement is designed for moment resistance at short and long spans as well as shear resistance. Deflection is checked and found to be within allowable limits.

Uploaded by

Mwengei Muteti
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
207 views4 pages

Design of Restrained Slab (Bs 8110) : Mid-Span

This document provides a summary of the design of a restrained slab according to BS 8110. Key details include: - The slab is for the second floor and has one short edge that is discontinuous. - Dimensions include a short span of 5m, long span of 8m, and thickness of 150mm. - Loading includes dead loads of 7.2 kN/m2 and live loads of 2.5 kN/m2 for a total load of 14.08 kN/m2. - Reinforcement is designed for moment resistance at short and long spans as well as shear resistance. Deflection is checked and found to be within allowable limits.

Uploaded by

Mwengei Muteti
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 4

DESIGN OF RESTRAINED SLAB (BS 8110)

Project : ABCD
Floor : Second Floor
Reference : S3
Date : 2/11/2017
Slab Type : 2 One Short Edge Discontinuous

1 4 7

2 5 8

3 6 9

DIMENSIONS & PROPERTIES LOADING

Short Span : 5 m Finishes : 1.20 kN/m2


Long Span : 8 m M&E : 0.00 kN/m2
Thickness : 150 mm Partition/GRC : 2.40 kN/m2
Cover : 25 mm Misc. : 0.00 kN/m2
Main Bar : 10 mm Selfweight : 3.60 kN/m2
Scnd. Bar : 10 mm Dead Load : 7.20 kN/m2
f cu : 20 N/mm 2 Live Load : 2.50 kN/m2
fy : 460 N/mm 2
Ultimate Load : 14.08 kN/m2
BS 8110 : 1997 Enter 1985 or 1997 Only! (Default Calculation will be based on 1997)

DESIGN FOR MOMENT RESISTANCE

ly/lx : 1.60 Depth, d x : 120 mm


lx : 5 m Depth, d y : 110 mm
Width : 1000 mm Total Load, n : 14.08 kN/m2

Short Span
Mid-Span
Coefficient : 0.047
Moment : * n * lx2 [ 0.047 * 14.08 * (5) ^2 ]
: 16.54 kNm
: M / (b*d *fcu)
2
K [ (16.54 * 10^6) / (1000 * (120) ^2 *20) ]
: 0.0574 K < 0.156 (Compression Reinf. Not needed)
z/d : 0.5 + ( 0.25 - K / 0.9) [ 0.5 + (0.25 - 0.0574 / 0.9) ^0.5 ]
: 0.932
As (req) : M / (0.95*fy*z) [ (16.54 * 10^6) / (0.95 * 460 * 0.932 * 120) ]
: 338.4 mm2
As (min) : 0.13%*b*h [ 0.13% * 1000 * 150 ]
: 195 mm2
As (prov) : 349.1 mm2
Reinf. : ( T 10 - 225 ) Use Reinf. From Deflection !
Continuous Edge (Support)
Coefficient : 0.063
Moment : * n * lx2 [ 0.063 * 14.08 * (5) ^2 ]
: 22.18 kNm
: M / (b*d *fcu)
2
K [ (22.18 * 10^6) / (1000 * (120) ^2 *20) ]
: 0.077 K < 0.156 (Compression Reinf. Not needed)
z/d : 0.5 + ( 0.25 - K / 0.9) [ 0.5 + (0.25 - 0.077 / 0.9) ^0.5 ]
: 0.906
As (req) : M / (0.95*fy*z) [ (22.18 * 10^6) / (0.95 * 460 * 0.906 * 120) ]
: 466.8 mm2
As (min) : 0.13%*b*h [ 0.13% * 1000 * 150 ]
: 195 mm2
As (prov) : 523.6 mm2
Reinf. : ( T 10 - 150 )

Long Span
Mid-Span
Coefficient : 0.028
Moment : * n * lx2 [ 0.028 * 14.08 * (5) ^2 ]
: 9.86 kNm
: M / (b*d *fcu)
2
K [ (9.86 * 10^6) / (1000 * (110) ^2 *20) ]
: 0.0407 K < 0.156 (Compression Reinf. Not needed)
z/d : 0.5 + ( 0.25 - K / 0.9) [ 0.5 + (0.25 - 0.0407 / 0.9) ^0.5 ]
: 0.95
As (req) : M / (0.95*fy*z) [ (9.86 * 10^6) / (0.95 * 460 * 0.95 * 110) ]
: 215.9 mm2
As (min) : 0.13%*b*h [ 0.13% * 1000 * 150 ]
: 195 mm2
As (prov) : 261.8 mm2
Reinf. : ( T 10 - 300 )

Continuous Edge (Support)


Coefficient : 0.037
Moment : * n * lx2 [ 0.037 * 14.08 * (5) ^2 ]
: 13.02 kNm
K : M / (b*d2*fcu) [ (13.02 * 10^6) / (1000 * (110) ^2 *20) ]
: 0.0538 K < 0.156 (Compression Reinf. Not needed)
z/d : 0.5 + ( 0.25 - K / 0.9) [ 0.5 + (0.25 - 0.0538 / 0.9) ^0.5 ]
: 0.936
As (req) : M / (0.95*fy*z) [ (13.02 * 10^6) / (0.95 * 460 * 0.936 * 110) ]
: 289.4 mm2
As (min) : 0.13%*b*h [ 0.13% * 1000 * 150 ]
: 195 mm2
As (prov) : 314.2 mm2
Reinf. : ( T 10 - 250 )

Dist. Reinf. : ( T 10 - 300 )


SHEAR RESISTANCE CHECK

Short Span
Continuous Edge
Coefficient : 0.5
Shear : * n * lx [ 0.5 * 14.08 * 5 ]
: 35.20 kN
Discontinuous Edge
Coefficient : 0
Shear : * n * lx [ 0 * 14.08 * 5 ]
: 0.00 kN

Long Span
Continuous Edge
Coefficient : 0.36
Shear : * n * lx [ 0.36 * 14.08 * 5 ]
: 25.34 kN
Discontinuous Edge
Coefficient : 0.24
Shear : * n * lx [ 0.24 * 14.08 * 5 ]
: 16.90 kN

v : V / (b*d) [ 35.2 *10^3 / (1000 * 120) ]


: 0.29 N/mm2
vc Calc. : 100 As / (b*d) [ 100 * 349.1 / (1000 * 120 ) ]
0.291
: 400 / d [ 400 / 120 ]
3.333
: fcu / 25 [ 20 / 25 ]
0.8
vc : 0.79 * (100As/bd) (400/d) (fcu/25) / 1.25
1/3 1/4 1/3

: 0.79 * ( 0.291^(1/3) ) * ( 3.333^(1/4) ) * ( 0.8^(1/3) ) / 1.25


: 0.525 N/mm2

OK ! No Shear Reinforcement needed

DEFLECTION CHECK

Mod. Fact : M / (b*d2) [ (16.54 * 10^6) / (1000 * (120) ^2) ]


: 1.149
fs : (2/3) * fy * (As req / As prov) [ (2/3) * 460 * ( 338.4 / 349.1 ) ]
: 297.27 N/mm2
: 0.55 + (477 - fs) / (120 * (0.9 + M/bd ))
2
Mod. Fact
: 0.55 + (477 - 297.27) / {120 * (0.9 + 1.149)}
: 1.281
Basic L/d : 26
(L/d) allowed : Basic L/d * Mod. Factor [ 26 * 1.281 ]
: 33.31
(L/d) actual : 41.67 [ 5 * 1000 / 120 ]

fs ' : 477 - (41.67 / 26 - 0.55) (120) (0.9 + 1.149)


: 218.16 N/mm2
As (prov) : (2/3) * fy * (As req / fs' ) [ (2/3) * 460 * ( 338.4 / 218.16 ) ]
: 475.7 mm2 < 4.0%*b*h OK !
Reinf. : ( T 10 - 150 )
OK ! Deflection Pass

You might also like