Certified to ISO 9001:2000 Standards

Standard
Wire Rope Hoists
EMH sets the standard for wire rope hoists!

Standard Hoist Designs

Include:
Model E
Monorail for single girder cranes

Model D
Top running for double girder cranes

Model Z
Top running, double girder with dual
motors, capacities to 50 tons
Monorail
Model SU
E Models Monorail hoist for single girder
Capacities to 15 tons cranes, with swivel trolley for
curved track

Double Girder
D Models
Capacities to 40 tons
EMH sets the standard for wire rope hoists!
Easily adjustable dual upper and A DC rectified magnet actuated
lower gear type limit switches disc motor brake is automatically
bring the load hook to a positive applied in the event of power failure.
stop at any desired position in both These self-adjusting and virtually
the hoisting and lowering directions. maintenance free brakes are
provided with asbestos-free, non-
polluting brake linings. An expected
service life of one million operations
before requiring the first adjustment.

Trolley drive consists of pole

changing squirrel-cage gear motor. Pre-tested, multi-pin quick
Integral disc brakes are specially disconnect plugs and socket
designed for crane service. Low connections for fast, safe, mistake-
torque, high inertia drives provide proof electrical assembly.
smooth acceleration and deceleration
without excessive load swing.

Travel motors are provided with DC

disc brakes, quick disconnect plugs,
and class F insulation.

Hoist motor and gear train are Large diameter, machine tool steel
designed and built to meet the most quality wheels and drive pinions.
severe demands of hoisting service Available for most any flange width
requiring frequent reversal and high or beam style.
starting torque. The motor is work
rated, with Class F insulation, and (Applies to Monorail E models
meets CSA requirements. only).

The gear train consists of hardened

and polished helical gears and
pinions. Compact design with low
weight/output ratio provides a highly Heavy duty clamp
efficient, quiet, and long lasting bumpers permit easy,
operation. on-site adjustment of
trolley stop locations for
Adjustable tow arm and trolley safe hoist movement.
travel limit switch available as
standard options.

Our hoists electrical

control panels, with
standard components and
spacious design, make
service more convenient
Rope Guide prevents rope from than competitive brands.
being unbraided, overlapped, or cut.
Protects operator from injury. Standard equipment on
all panels includes:
Maintains the rope in contact with Hoist manual motor starter breaker and overload; hoist two-speed
the drum grooves even under slack reversing contactors; trolley manual motor starter breaker and
rope conditions. overload, trolley two-speed reversing contactors (monorail models),
trolley VFD and dynamic braking resistor (top running models),
and NEMA 12 enclosure.
EMH sets the standard for wire rope hoists!
Top Running
Double Girder
Trolley Features: Wire Rope Hoists
Drive wheels are forged steel

Options:
or spheroidal castings.

A splined drive axle directly

engages the output shaft of the
reducer.
SU Monorail Hoists for
Our drive wheel assembly
is like no other in the industry. curved track applications
It allows quick and easy wheel
removal without special tools. 8/2 and 4/2 Reeving for True
The tapered power lock system Vertical Lift (TVL)
eliminates the need for press fit
and a keyway on the axle.
Hoist Overload Device
Polyamid bumpers at both
ends absorb energy and meet Trolley Travel Limit Switches
OSHA requirements.
4-, 6-, or 8-Pushbutton Pendant
Our standard drive motors
are of single speed squirrel Assembly
cage design with VFD (inverter)
controls. Inverters provide Tapered Trolley Wheels for S
infinitely variable speeds and beams
reduce starting current for
extended motor life.
Patented Track Operation
EMH endtrucks use a direct
drive system, eliminating the Faster Trolley Speeds
need to lubricate open gears,
pinions and couplings. Trolley Tow Arm
Our motors have Class F
insulation. Large surface cooling 208 or 230 Volt Hoist Trolley
fins are used for excellent heat Controls
dissipation. Quick disconnect
plugs used for convenient Mainline Contactor and
installation and service.
Transformer
A DC rectified disc brake
is automatically applied in the Transformer for Monorail Hoist
event of power failure. The brake
is self-adjusting, and virtually Flux Vector Closed Loop
maintenance free.
Variable Frequency Hoist Drive
Trolley VFD
Wire Rope Hoists Standard Features
EMH hoists are available in monorail and top running double girder models to provide a
price to performance ratio that compares favorably with the best the industry has to offer.

Series production with uniform quality Modern helical gear trolley drive
Modular construction with optimally DC rectified brakes with a minimum of
matched components one million maintenance-free operations
Space saving, future oriented design Two position upper and one lower
Two lifting speeds with 6:1 speed ratio precision limit switch

Two trolley speeds with 4:1 speed ratio Lang-lay, pre-formed high strength wire
rope with steel core
TEFC motors designed for smooth crane
service Heavy duty, wear resistant rope guide

Class F motor insulation All controls mounted in NEMA 12

enclosure with overload protection
Lifetime lubricated bearings and gear
reducers Heavy duty bottom block with safety
latch and hardened sheaves

Standard EMH Hoist Models

Single Girder Double Girder
Hoist Capacities Lifts Lifting Hoist Capacities Lifts Lifting
Reeving Speed Reeving Speed
Model (tons) (feet) (fpm*) Model (tons) (feet) (fpm*)
800E 4/1 2,3 20,33,50 16/2.6 1000D 4/1 5 20,33,50 16/2.6
1000E 4/1 3,5 20,33,50 16/2.6 8/2 ** 5 7,16,27,33 16/2.6
2/1 2 40,66,100 32/5.2 2000D 4/1 5,7.5 20,33,50 18/3
4/2 ** 2 18,36,59 32/5.2 8/2 ** 5,7.5 7,18,31 18/3
8/2 ** 3,5 7,16,27,33 16/2.6 3000D 4/1 7.5,10 20,33,50 16/2.6
2000E 4/1 3,5,7.5 20,33,50 18/3 13.75
2/1 2,3 40,66,100 34/5.6 2/1 5,7.5 40,66,100 32/5.2
4/2 ** 2,3 23,44,70 36/6 4/2 ** 5 17,34,55 32/5.3
8/2 ** 5,7.5 7,18,31 18/3 4/2 ** 7.5 20,36,58 32/5.3
3000E 4/1 5,7.5 20,33,50 16/2.6 8/2 ** 7.5,10 5,13,23,33 16/2.6
10,13.75 8/2 ** 13.75 6,15,26,33 16/2.6
2/1 5 40,66,100 32/5.2 6/1 10 13,22,33 11/1.8
4/2 ** 5 17,34,55 32/5.6 6/1 15,20 13,22,33 10.5/1.6
4/2 ** 7.5 20,36,58 32/5.6 5000D 4/1 10,15,20 20,33,50 16/2.6
8/2 ** 7.5,10 5,13,23,33 16/2.6 2/1 5,7.5,10 40,66,100 32/5.2
8/2 ** 13.75 6,15,26,33 16/2.6 4/2 ** 5,7.5,10 20,36,58 32/5.3
5000E 4/1 10,15 20,33,50 16/2.6 8/2 ** 10,15,20 6,15,27,33 16/2.6
2/1 5,7.5,10 40,66,100 32/5.2 6/1 15,20 13,22,33 10.5/1.6
4/2 ** 5,7.5,10 20,36,58 32/5.3 6/1 25,30 13,22,33 9.0/1.5
8/2 ** 10,15 6,15,27,33 16/2.6 6000D 4/1 15,20,25 20,33,50 14/2.3
4/2 ** 7.5,10 15,33,56 27/4
13.75
8/2 ** 15,20,25 11,23,33 13.4/2
* Standard speeds. Consult EMH for higher speeds. 6/1 15,20,25 13,22,33 9.0/1.5
** Double Reeved. 30,35,40
EMH
Headquarters
Valley City, OH is the site of the EMH corporate
headquarters and manufacturing plant. Our modern facility
provides us with plenty of production space and room for
expansion, making EMH readily adaptable to the needs of
21st century industry.

EMH is certified to ISO 9001:2000 Standards for the design,

manufacturing, installation and servicing of overhead
cranes, and is a member of Material Handling Industry of
America (MHIA) and Crane Manufacturers Association of
America (CMAA).

MEMBER COMPANY

Complete
Cranes

Overhead Gantry NOMAD NOMAD AL Aluminum

Cranes Cranes Free Standing Systems Rail and Lifting Devices

Crane
Components

Wire Rope Controls Endtrucks & System 2000

Hoists Wheel Blocks Crane Kits

EMH cranes and components

are sold and serviced by:

PF-0806-5M