DOC 03 R E Edition: 03/05.

2010 Replaces: DOC 02 R E

HYDRAULIC
PUMPS, MOTORS
Headquarters:
& FILTERS
CASAPPA S.p.A.
Via Balestrieri, 1
43044 Lemignano di Collecchio
Parma (Italy)
Tel. (+39) 0521 30 41 11
Fax (+39) 0521 80 46 00
IP Videoconferencing
E-mail: [email protected]
www.casappa.com
 Our passion for high performance in hydraulic drives us.

Constant evolution and a passion for hydraulics; this has been Casappas strategy, a privately owned company
that has been working for more than fifty years in the field of fluid power transmission.

We design and build the main components for the hydraulic system.
We listen to and work with our customers, from developing a new idea to after-sales service, anywhere around
the globe.
As a tight-knit group of highly motivated and professionally qualified people, we are always ready to meet new
challenges head on.
Thanks to the use of the most modern design engineering, simulation and lab testing technologies, we are
always flexible and ready to quickly modify our offer to meet market demands.
We are convinced that integrating electronics with hydraulics is instrumental to improve hydraulic control circuit
performance. For this reason we continuously invest in research & development, increasing the number of
electronic control and regulation parts in our system.
Quality is our total commitment: thats why all of our products are thoroughly tested with constant monitoring
including data analysis and traceability. Further, specific tests are performed on machines in the field to verify
their effectiveness in their actual environment.

Casappa is worldwide recognized as a highly specialised manufacturer of hydraulic components.

We offer:

Fixed and variable displacement hydraulic pumps and motors

Hydraulic valves to control pressure and flow rate
Hydraulic filters

2 DOC 03 R E
 SALES BY PRODUCT APPLICATIONS

Building & Construction 26%

Agriculture 24%

Truck Market 22%

Material Handling 15%

Industrial 9%

Turf Care 4%

Some of the major companies that rely on our specialised expertise and choose us as an important supplier of
hydraulic components for a wide range of applications include:

AGCO CHENGGONG GUIMA PALFINGER KOMATSU SCHMIDT VOLVO

AMMAN-YANMAR CNH HUNAN SUNWARD LINDE STILL XCMG

ARGO TRACTORS DAIMLER HYUNDAI MANITOU GROUP TEREX YITOU LUTONG

ATLAS COPCO DOOSAN HYVA MANITOWOC TEXTRON ZOOMLION

BOBCAT FARID JOHN DEERE MERLO TORO

CATERPILLAR FOTON LOVOL JUNGHEINRICH SANY TOYOTA Industrial Equipment

DOC 03 R E 3
4 DOC 03 R E
 Product range

Aluminium body gear pumps and motors

Cast iron body gear pumps and motors
Aluminium body gear flow dividers
Cast iron body gear flow dividers
Fixed displacement axial piston pumps and motors
Variable displacement axial piston pumps
Hand pumps

DOC 03 R E 5
 A complete range of high quality pumps Headquarters:
CASAPPA S.p.A.
and motors, the end result of listening Via Balestrieri,1
carefully to what customers need and of 43044 Lemignano Di Collecchio
Parma (Italy)
working closely with suppliers. Tel. (+39) 0521 30 41 11
Fax (+39) 0521 80 46 00
IP Videoconferencing
E-mail: [email protected]
www.casappa.com

6 DOC 03 R E
 Casappa offers nothing but the best value to its
customers thanks to the skills and expertise of
its workforce, investments in research and new
technologies, cooperation with leading universities
and electronics-hydraulics integration. Casappa offers a wide choice of gear or piston
pumps and motors for open-circuit applications.
Many functions, such as valves and controls, are
built directly into the products to optimise system
space and costs.

DOC 03 R E 7
 Aluminium body gear pumps and motors

POLARIS series
Gear pumps and motors built in three pieces with an extruded body in high resistance aluminium alloy. The wide choice of
shafts, flanges and ports, in compliance with all international standards (SAE, DIN and EUROPEAN) allow for their use in
an infinite variety of applications.
Displacements from 1,07 cm3/rev G 0.07 in3/rev to 91,10 cm3/rev G 5.56 in3/rev available in groups 10, 20 and 30.
Max. peak pressure up to 300 bar G 4350 psi.
Max. speed up to 4000 min1.
Main characteristics

Displacement Max. continuous Max. speed

pressure
POLARIS 10 cm3/rev G in3/rev bar G psi min1
PL. 101 1,07 G 0.07 260 G 3750 4000
PL. 101,5 1,60 G 0.10 260 G 3750 4000
PL. 102 2,13 G 0.13 260 G 3750 4000
PL. 102,5 2,67 G 0.16 260 G 3750 4000
PL. 103,15 3,34 G 0.20 260 G 3750 4000
PL. 104 4,27 G 0.26 250 G 3600 4000
PL. 105 5,34 G 0.33 250 G 3600 4000
PL. 105,8 6,20 G 0.38 230 G 3350 3500
PL. 106,3 6,67 G 0.41 230 G 3350 3500
PL. 108 8,51 G 0.52 180 G 2600 3500
PL. 1010 10,67 G 0.65 140 G 2050 3500

POLARIS 20 cm3/rev G in3/rev bar G psi min1

PL. 204 4,95 G 0.30 250 G 3600 4000
PL. 206,3 6,61 G 0.40 250 G 3600 4000
PL. 207,2 7,29 G 0.44 250 G 3600 4000
Features
PL. 208 8,26 G 0.50 250 G 3600 3500
High efficiencies PL. 209 9,17 G 0.56 250 G 3600 3500
Integrated outboard bearings for heavy duty PL. 2010,5 10,90 G 0.66 250 G 3600 3500
applications PL. 2011,2 11,23 G 0.69 250 G 3600 3500
Multiple units available in standard version, PL. 2014 14,53 G 0.89 250 G 3600 3500
common inlet and separated stages PL. 2016 16,85 G 1.03 250 G 3600 3000
Electrohydraulic fan drive system PL. 2019 19,09 G 1.16 200 G 2900 3000
Custom design PL. 2020 21,14 G 1.29 200 G 2900 3000
PL. 2024,5 24,84 G 1.52 170 G 2450 2500
Optional builtin valves
PL. 2025 26,42 G 1.61 170 G 2450 2500
Anticavitation valves PL. 2027,8 28,21 G 1.72 130 G 1900 2000
Maximum pressure relief valves PL. 2031,5 33,03 G 2.01 130 G 1900 2000
Priority valves
LoadSensing priority valves POLARIS 30 cm3/rev G in3/rev bar G psi min1
Bypass electric valves PL. 3022 21,99 G 1.34 250 G 3600 3000
Proportional relief valves PL. 3027 26,70 G 1.63 250 G 3600 3000
Reverse valves PL. 3034 34,55 G 2.11 240 G 3500 3000
PL. 3038 39,27 G 2.40 240 G 3500 3000
PL. 3043 43,98 G 2.68 230 G 3350 3000
PL. 3051 51,83 G 3.16 210 G 3050 2500
PL. 3061 61,26 G 3.74 190 G 2750 2500
PL. 3073 73,82 G 4.50 170 G 2450 2500
PL. 3082 81,68 G 4.98 160 G 2300 2200
PL. 3090 91,10 G 5.56 150 G 2200 2200

NOTES
PL. : PLP = pump / PLM = motor

8 DOC 03 R E
Aluminium body gear pumps

WHISPER series: low noise emission reduced pulsations by 75%

Gear pumps built in three pieces with an extruded body in high resistance aluminium alloy. WHISPER is a new and
original technology protected by international patents and applied to a family of external gear pumps that feature low noise
emissions. The wide choice of shafts, flanges and ports, in compliance with all international standards (SAE, DIN and
EUROPEAN) allow for their use in an infinite variety of applications.
Displacements from 1,12 cm3/rev G 0.07 in3/rev to 96,85 cm3/rev G 5.91 in3/rev available in groups 10, 20 and 30.
Max. peak pressure up to 300 bar G 4350 psi.
Max. speed up to 4000 min1.

Main characteristics

Displacement Max. continuous Max. speed

pressure
WHISPER 10 cm3/rev G in3/rev bar G psi min1
WSP 101 1,12 G 0.07 260 G 3750 4000
WSP 101,5 1,68 G 0.10 260 G 3750 4000
WSP 102 2,24 G 0.14 260 G 3750 4000
WSP 102,5 2,80 G 0.17 260 G 3750 4000
WSP 103,15 3,48 G 0.21 260 G 3750 4000
WSP 104 4,45 G 0.27 250 G 3600 4000
WSP 105 5,60 G 0.34 250 G 3600 4000
WSP 105,8 6,51 G 0.40 230 G 3350 3500
WSP 106,3 7,00 G 0.43 230 G 3350 3500
WSP 108 8,92 G 0.54 180 G 2600 3500
WSP 1010 11,20 G 0.68 140 G 2050 3500

WHISPER 20 cm3/rev G in3/rev bar G psi min1

Features WSP 204 5,25 G 0.32 250 G 3600 4000
WSP 206,3 7,00 G 0.43 250 G 3600 4000
High efficiencies
WSP 207,2 7,72 G 0.47 250 G 3600 4000
Low noise emission
WSP 208 8,74 G 0.53 250 G 3600 3500
Integrated outboard bearings for heavy duty
applications WSP 209 9,65 G 0.59 250 G 3600 3500
Multiple units WSP 2010,5 11,54 G 0.70 250 G 3600 3500
Custom design WSP 2011,2 11,89 G 0.73 250 G 3600 3500
WSP 2014 15,39 G 0.94 250 G 3600 3500
Optional builtin valves WSP 2016 17,84 G 1.09 250 G 3600 3000
WSP 2019 20,22 G 1.23 200 G 2900 3000
Anticavitation valves
WSP 2020 22,38 G 1.37 200 G 2900 3000
Maximum pressure relief valves
WSP 2024,5 26,30 G 1.60 170 G 2450 2500
Priority valves
WSP 2025 27,98 G 1.71 170 G 2450 2500
LoadSensing priority valves
WSP 2027,8 29,87 G 1.82 130 G 1900 2000
Bypass electric valves
WSP 2031,5 34,98 G 2.13 130 G 1900 2000

WHISPER 30 cm3/rev G in3/rev bar G psi min1

WSP 3022 23,38 G 1.43 250 G 3600 3000
WSP 3027 28,39 G 1.73 250 G 3600 3000
WSP 3034 36,74 G 2.24 240 G 3500 3000
WSP 3038 41,75 G 2.55 240 G 3500 3000
WSP 3043 46,76 G 2.85 230 G 3350 3000
WSP 3051 55,10 G 3.36 210 G 3050 2500
WSP 3061 65,12 G 3.97 190 G 2750 2500
WSP 3073 78,48 G 4.79 170 G 2450 2500
WSP 3082 86,83 G 5.30 160 G 2300 2200
WSP 3090 96,85 G 5.91 150 G 2200 2200

DOC 03 R E 9
 Cast iron body gear pumps and motors

POLARIS PH series
Gear pumps and motors built in three pieces with cast iron body. The new gear pumps and motors PH series is an evolu
tion of the POLARIS series. POLARIS PH has a new body made of cast iron to have higher operating parameters and
keep the full POLARIS versatility regarding shafts, flanges, ports and built-in valves.
This project is targeted for forklifts, skid steer loaders and all those applications where traditional aluminum pumps are
being pushed close to their limits. The possibility to mate the body with the cast iron covers further reduces noise levels, in
addition to increasing strength.
Displacements from 19,09 cm3/rev G 1.16 in3/rev to 33,03 cm3/rev G 2.01 in3/rev.
Max. peak pressure up to 300 bar G 4350 psi.
Max. speed up to 3500 min1.

Main characteristics

Displacement Max. continuous Max. speed

pressure
POLARIS PH 20 cm3/rev G in3/rev bar G psi min1
PH. 2019 19,09 G 1.16 250 G 3600 3500
PH. 2020 21,14 G 1.29 250 G 3600 3500
PH. 2023 23,32 G 1.42 250 G 3600 3000
PH. 2024,5 24,84 G 1.52 230 G 3350 3000
PH. 2025 26,42 G 1.61 230 G 3350 3000
PH. 2027,8 28,21 G 1.72 200 G 2900 2500
PH. 2031,5 33,03 G 2.01 200 G 2900 2500

NOTES
PH. : PHP = pump / PHM = motor

Features
High working pressure also for high displacements
Long service life
Low noise level
High volumetric efficiency also at high temperature
Inlet & Outlet optimization High speed
Combination in multiple pumps
Built-in Valves simplify circuit design

Optional builtin valves

Anticavitation valves
Maximum pressure relief valves
Priority valves
LoadSensing priority valves
Bypass electric valves
Proportional relief valves
Reverse valves

10 DOC 03 R E
Cast iron body gear pumps and motors

KAPPA and KAPPA COMPACT series

Gear pumps and motors made of cast iron in two pieces. A rigid and compact structure that makes it possible to
incorporate a number of functions in a limited space.
Wide range of displacements: from 4,95 cm3/rev G 0.30 in3/rev to 150,79 cm3/rev G 9.20 in3/rev available in groups 20, 30 and
40.
Max. peak pressure up to 330 bar G 4800 psi.
Main characteristics
Max. speed up to 4000 min1.
Displacement Max. continuous Max. speed
pressure
KAPPA 20 cm3/rev G in3/rev bar G psi min1
K. 204 4,95 G 0.30 285 G 4150 4000
K. 206,3 6,61 G 0.40 285 G 4150 4000
K. 208 8,26 G 0.50 285 G 4150 3500
K. 2011,2 11,23 G 0.69 275 G 4000 3500
K. 2014 14,53 G 0.89 265 G 3850 3500
K. 2016 16,85 G 1.03 260 G 3750 3000
K. 2020 21,14 G 1.29 210 G 3050 3000
K. 2025 26,42 G 1.61 180 G 2600 2500
K. 2031,5 33,03 G 2.01 140 G 2050 2500

KAPPA 30 cm3/rev G in3/rev bar G psi min1

K. 3027 26,70 G 1.63 280 G 4050 3000
K. 3034 34,56 G 2.11 260 G 3750 3000
K. 3038 39,27 G 2.40 260 G 3750 3000
K. 3043 43,98 G 2.68 250 G 3600 3000
K. 3051 51,83 G 3.16 230 G 3350 2500
K. 3056 56,54 G 3.45 215 G 3100 2500
Features K. 3061 61,26 G 3.74 200 G 2900 2500
K. 3073 73,82 G 4.50 180 G 2600 2500
High operating pressures
High efficiency at high temperature KAPPA compact 30 cm3/rev G in3/rev bar G psi min1
Low noise emission K. 3022 3000
21,99 G 1.34 280 G 4050
Exceptional working life expectancy
K. 3027 26,70 G 1.63 280 G 4050 3000
Solid and compact design
K. 3031 30,63 G 1.87 260 G 3750 3000
Custom design
K. 3034 34,56 G 2.11 260 G 3750 3000
K. 3038 39,27 G 2.40 260 G 3750 3000
Optional builtin valves
K. 3041 41,62 G 2.54 250 G 3600 3000
Antishock and anticavitation valves K. 3043 43,98 G 2.68 250 G 3600 3000
Priority valves K. 3046 46,34 G 2.83 250 G 3600 3000
LoadSensing priority valves K. 3051 51,83 G 3.16 230 G 3350 2500
Bypass electric valves K. 3056 56,54 G 3.45 215 G 3100 2500
K. 3061 61,26 G 3.74 200 G 2900 2500
K. 3073 73,82 G 4.50 180 G 2600 2500

KAPPA compact 40 cm3/rev G in3/rev bar G psi min1

K. 4063 61,43 G 3.75 300 G 4350 2800
K. 4073 72,60 G 4.43 300 G 4350 2800
K. 4087 86,56 G 5.28 280 G 4050 2800
K. 40109 108,90 G 6.64 250 G 3600 2800
K. 40121 121,80 G 7.43 230 G 3350 2500
K. 40133 134,03 G 8.18 220 G 3200 2500
K. 40151 150,79 G 9.20 200 G 2900 2500

NOTES
K. : KP = pump / KM = motor

DOC 03 R E 11
 Cast iron body gear pumps and motors

FORMULA and FORMULA SFP series

Gear pumps made of cast iron in two pieces, ideal for truck application.
Displacements from 8,26 cm3/rev G 0.50 in3/rev to 150,79 cm3/rev G 9.20 in3/rev available in groups 20, 30, 35 and 40.
Max. peak pressure up to 325 bar G 4700 psi.
Max. speed up to 3000 min1.

Main characteristics

Displacement Max. continuous Max. speed

pressure
FORMULA 20 cm3/rev G in3/rev bar G psi min1
FP 208 8,26 G 0.50 280 G 4050 2000
FP 2011,2 11,23 G 0.69 280 G 4050 2000
FP 2016 16,85 G 1.03 280 G 4050 2000
FP 2020 21,14 G 1.29 260 G 3750 2000
FP 2025 26,42 G 1.61 220 G 3200 2000
FP 2031,5 33,03 G 2.01 190 G 2750 1800
FP 2036 35,94 G 2.19 170 G 2450 1800
FP 2040 39,64 G 2.42 160 G 2300 1800

FORMULA 30 cm3/rev G in3/rev bar G psi min1

FP 3017 17,28 G 1.05 290 G 4200 3000
FP 3027 26,70 G 1.63 290 G 4200 3000
FP 3034 34,56 G 2.11 280 G 4050 2800
FP 3038 39,27 G 2.40 280 G 4050 2800
FP 3043 43,98 G 2.68 270 G 3900 2500
Features FP 3051 51,83 G 3.16 240 G 3500 2500
High performance also at very low speed FP 3061 61,26 G 3.74 220 G 3200 2000
Different ports position availability FP 3073 73,82 G 4.50 200 G 2900 1800
Low noise emission FP 3082 81,68 G 4.98 190 G 2750 1800
Shaft seal system no leakage guarantee FP 30100 100,52 G 6.16 180 G 2600 1800
Modular design FP 30125 125,66 G 7.67 160 G 2300 1800
Direct mounting on the PTOs
FORMULA 40 cm3/rev G in3/rev bar G psi min1
FP 4063 61,43 G 3.75 290 G 4200 2700
FP 4073 72,60 G 4.43 280 G 4050 2700
FP 4087 86,56 G 5.28 260 G 3750 2700
FP 40109 108,90 G 6.64 240 G 3500 2700
FP 40133 134,03 G 8.18 220 G 3200 2500
FP 40151 150,79 G 9.20 180 G 2600 2500

FORMULA SFP 30 cm3/rev G in3/rev bar G psi min1

SFP 3034 35,43 G 2.16 280 G 4050 2800
SFP 3043 45,09 G 2.75 270 G 3900 2500
SFP 3051 53,14 G 3.24 250 G 3600 2500
SFP 3061 62,80 G 3.83 230 G 3350 2500
SFP 3073 75,68 G 4.62 205 G 2950 2250
SFP 3082 83,74 G 5.11 195 G 2800 2250

FORMULA SFP 35 cm3/rev G in3/rev bar G psi min1

SFP 3590 95,99 G 5.86 230 G 3350 2250
SFP 35100 104,92 G 6.40 220 G 3200 2250
SFP 35112 118,31 G 7.22 205 G 2950 2250

12 DOC 03 R E
Cast iron body gear pumps and motors

MAGNUM series
Gear pumps and motors made of cast iron in three pieces. An extremely versatile and reliable design, also in the most
extreme operating conditions.
Displacements from 17,28 cm3/rev G 1.05 in3/rev to 125,63 cm3/rev G 7.66 in3/rev available in groups 30 and 35.
Max. peak pressure up to 320 bar G 4650 psi.
Max. speed up to 3000 min1.

Main characteristics

Displacement Max. continuous Max. speed

pressure
MAGNUM 30 cm3/rev G in3/rev bar G psi min1
HD. 3017 17,28 G 1.05 280 G 4050 3000
HD. 3022 21,99 G 1.34 280 G 4050 3000
HD. 3024 24,03 G 1.47 280 G 4050 3000
HD. 3027 26,70 G 1.63 280 G 4050 3000
HD. 3034 34,56 G 2.11 270 G 3900 3000
HD. 3038 39,27 G 2.40 270 G 3900 3000
HD. 3043 43,98 G 2.68 260 G 3750 3000
HD. 3051 51,83 G 3.16 230 G 3350 2500
HD. 3056 56,55 G 3.45 215 G 3100 2500
HD. 3061 61,26 G 3.74 200 G 2900 2000
HD. 3073 73,82 G 4.50 190 G 2750 1700
HD. 3082 81,68 G 4.98 170 G 2450 1500
Features
Wide range of drive shafts and flanges in SAE MAGNUM 35 cm3/rev G in3/rev bar G psi min1
version HD. 3540 40,46 G 2.47 270 G 3900 3000
More choices of port locations
HD. 3550 51,10 G 3.12 270 G 3900 3000
Integrated outboard bearings for heavy duty
applications HD. 3563 63,88 G 3.90 270 G 3900 3000
Multiple units available in standard version, HD. 3571 72,40 G 4.42 250 G 3600 3000
common inlet and separated stages HD. 3580 80,91 G 4.94 250 G 3600 3000
Exceptional working life expectancy
HD. 3590 91,56 G 5.59 230 G 3350 2700
HD. 35100 100,08 G 6.10 210 G 3050 2700
HD. 35112 112,85 G 6.88 190 G 2750 2700
HD. 35125 125,63 G 7.66 170 G 2450 2500

NOTES
HD. : HDP = pump / HDM = motor

DOC 03 R E 13
 Aluminium body gear flow dividerss

POLARIS series
Gear flow dividers made of high resistance aluminium alloy. These components can be used as flow equalizers, flow
dividers and pressure intensifiers.
Displacements from 2,14 cm3/rev G 0.13 in3/rev to 33,03 cm3/rev G 2.01 in3/rev available in groups 10 and 20.
Max. peak pressure up to 280 bar G 4050 psi.

Main characteristics

Displacement Max. continuous Max. speed

outlet pressure
POLARIS 10 cm3/rev G in3/rev bar G psi min1
PLD 102 2,14 G 0.13 250 G 3600 4200
PLD 103,15 3,34 G 0.20 250 G 3600 3990
PLD 104 4,27 G 0.26 250 G 3600 3940
PLD 105 5,34 G 0.33 250 G 3600 3680
PLD 106,3 6,67 G 0.41 250 G 3600 3500

POLARIS 20 cm3/rev G in3/rev bar G psi min1

PLD 204 4,95 G 0.30 250 G 3600 4100
PLD 206,3 6,61 G 0.40 250 G 3600 3970
PLD 208 8,26 G 0.50 250 G 3600 3850
PLD 2011,2 11,23 G 0.69 250 G 3600 3660
PLD 2014 14,53 G 0.89 250 G 3600 3460
Features PLD 2016 16,85 G 1.03 200 G 2900 3335
Modular design PLD 2020 21,14 G 1.29 200 G 2900 3125
Accurate division of flow PLD 2025 26,42 G 1.61 200 G 2900 2900
Builtin relief valves
PLD 2031,5 33,03 G 2.01 200 G 2900 2660
Combinations between different groups

14 DOC 03 R E
Cast iron body gear flow dividers

MAGNUM series
Gear flow dividers made of cast iron. These components can be used as flow equalizers, flow dividers and pressure
intensifiers.
Displacements from 17,28 cm3/rev G 1.05 in3/rev to 125,63 cm3/rev G 7.66 in3/rev available in groups 30 and 35.
Max. peak pressure up to 320 bar G 4650 psi.

Main characteristics

Displacement Max. continuous Max. speed

outlet pressure
MAGNUM 30 cm3/rev G in3/rev bar G psi min1
HDD 3017 17,28 G 1.05 280 G 4050 3000
HDD 3022 21,99 G 1.34 280 G 4050 3000
HDD 3027 26,70 G 1.63 280 G 4050 3000
HDD 3034 34,56 G 2.11 270 G 3900 3000
HDD 3043 43,98 G 2.68 260 G 3750 3000
HDD 3051 51,83 G 3.16 230 G 3350 2500
HDD 3061 61,26 G 3.74 200 G 2900 2000
HDD 3073 73,82 G 4.50 190 G 2750 1700
HDD 3082 81,68 G 4.98 170 G 2450 1500

MAGNUM 35 cm3/rev G in3/rev bar G psi min1

HDD 3550 51,10 G 3.12 270 G 3900 3000
Features HDD 3563 63,88 G 3.90 270 G 3900 3000
Modular design HDD 3571 72,40 G 4.42 250 G 3600 3000
Accurate division of flow HDD 3580 80,91 G 4.94 250 G 3600 3000
High flow
HDD 3590 91,56 G 5.59 230 G 3350 2700
Combinations between different groups
HDD 35100 100,08 G 6.10 210 G 3050 2700
HDD 35112 112,85 G 6.88 190 G 2750 2700
HDD 35125 125,63 G 7.66 170 G 2450 2500

DOC 03 R E 15
 Fixed displacement axial piston pumps

STRADA series
Fixed displacement bent axis piston pumps. STRADA pumps are ideally suited for PTOs applications in vehicles.
Displacements from 40,9 cm3/rev G 2.49 in3/rev to 110 cm3/rev G 6.71 in3/rev available in groups 32 and 37.
Max. peak pressure up to 400 bar G 5800 psi.
Max. speed up to 2950 min1.

Main characteristics

Displacement Max. continuous Max. speed

pressure
STRADA 32 cm3/rev G in3/rev bar G psi min1
BAP 3240 40,90 G 2.49 350 G 5100 2950
BAP 3250 50,10 G 3.06 350 G 5100 2750
BAP 3263 63,00 G 3.84 350 G 5100 2450
BAP 3271 71,60 G 4.37 315 G 4600 2250
BAP 3280 78,30 G 4.78 315 G 4600 2200

STRADA 37 cm3/rev G in3/rev bar G psi min1

BAP 3780 79,10 G 4.83 350 G 5100 2500
BAP 37110 110,00 G 6.71 300 G 4350 2300

Features
Low noise level
Direct mounting on the PTOs
Compact design
High volumetric, mechanical and overall efficiency
Available in ISO and UNI standard

16 DOC 03 R E
Fixed displacement axial piston pumps and motors

PLATA series
Fixed displacement axial piston pumps and motors swash plate design for open circuit applications. The design itself is
extremely compact while integrating a number of functions, with an electrically controlled valve on the pump and antishock
valves on the motor.
Unidirectional pumps LFP48: displacements from 27 cm3/rev G 1.65 in3/rev to 48,2 cm3/rev G 2.94 in3/rev.
Reversible motors LFM30: displacements from 22 cm3/rev G 1.34 in3/rev to 30,2 cm3/rev G 1.84 in3/rev.
Max. peak pressure up to 350 bar G 5100 psi.

Main characteristics

Displacement Max. continuous Max. speed

pressure
PLATA pumps cm3/rev G in3/rev bar G psi min1
LFP 4827 27,00 G 1.65 280 G 4050 2600
LFP 4834 34,00 G 2.07 280 G 4050 2600
LFP 4836,7 36,70 G 2.24 280 G 4050 2600
LFP 4845,5 45,50 G 2.78 280 G 4050 2600
LFP 4848 48,20 G 2.94 280 G 4050 2600

PLATA motors cm3/rev G in3/rev bar G psi min1

LFM 3022 22,00 G 1.34 280 G 4050 4900
LFM 3026,5 26,50 G 1.62 280 G 4050 4800
LFM 3028,5 28,50 G 1.74 280 G 4050 4700
LFM 3030,2 30,20 G 1.84 280 G 4050 4500

Pumps features
Threeposition electrically controlled valve with relief
valve
Electronic control of the rotor startup and stop ramps
Rotation reverse with controlled delay
Easy integration with the machine cabin controls
Auxiliary gear pump with common suction, available
with either castiron or aluminium body

Motors features
Reversible rotation with integral antishock valves
European and SAE standard mounting flanges
Side or rear inlet options
Compact size

DOC 03 R E 17
 Variable displacement axial piston pumps

PLATA LVP series

Variable displacement axial piston pumps swash plate design. PLATA pumps are ideally suited for medium and high
pressure open circuit applications.
Displacements from 28,49 cm3/rev G 1.74 in3/rev to 87,90 cm3/rev G 5.37 in3/rev.
Max. peak pressure up to 350 bar G 5100 psi.
Max. speed up to 3000 min1.

Main characteristics

Max Max. continuous Max. speed

displacement pressure
PLATA LVP cm3/rev G in3/rev bar G psi min1
LVP 30 28,49 G 1.74 280 G 4050 3000
LVP 48 45,47 G 2.77 280 G 4050 2600
LVP 75 75,53 G 4.61 280 G 4050 2200
LVP 90 87,90 G 5.37 250 G 3600 1850

Features
Energy savings
Low noise emission
Short response time
Drive shaft bearing suitable for radial and axial loads
Multiple combinations

Controls
Pressure compensator
Flow and pressure compensator (LoadSensing)
Torque limiter
Electrohydraulic servocontrols

18 DOC 03 R E
Variable displacement axial piston pumps

MVP series
Variable displacement axial piston pumps swash plate design ideally suited for open circuit in mobile hydraulic applications.
The compact design allows to be mounted directly on engine motors.
Displacements from 28,5 cm3/rev G 1.74 in3/rev to 84 cm3/rev G 5.12 in3/rev.
Max. peak pressure up to 350 bar G 5100 psi.
Max. speed up to 3000 min1.

Main characteristics

Max Max. continuous Max. speed

displacement pressure
MVP cm3/rev G in3/rev bar G psi min1
MVP 30.28 28,50 G 1.74 280 G 4050 3000
MVP 30.34 33,60 G 2.05 250 G 3600 3000
MVP 48.45 45,00 G 2.75 280 G 4050 3000
MVP 48.53 53,00 G 3.23 250 G 3600 2800
MVP 60.60 60,00 G 3.66 280 G 4050 2700
MVP 60.72 72,00 G 4.39 280 G 4050 2500
MVP 60.84 84,00 G 5.12 250 G 3600 2500

Features
Exceptional working life expectancy
Low noise emission
Drive shaft bearing suitable for radial and axial loads
Multiple combinations

Controls
Min. and max. displacement limiter
Pressure compensator
Flow and pressure compensator (LoadSensing)
Torque limiter

DOC 03 R E 19
 Variable displacement axial piston pumps

PLATA SVP DVP series

Variable displacement axial piston pumps swash plate design for open circuit applications. SVP single flow, DVP dual
flow on piston pump and an additional piggybacked gear pump. The automatic overall torque limiter allows to optimize the
performance of themachine. SVP and DVP pumps has been designed specifically for mini excavators where compactness
and ease of installation are critical.
Piston pump: displacements from 7,8 cm3/rev G 0.48 in3/rev to 30 cm3/rev G 1.83 in3/rev.
Gear pump: displacements from 4,95 cm3/rev G 0.30 in3/rev to 21,14 cm3/rev G 1.29 in3/rev.
Max. speed up to 2600 min1.

Main characteristics

Max Max. continuous Max. speed

displacement pressure
PLATA SVP cm3/rev G in3/rev bar G psi min1
SVP 7,8 15,60 G 0.95 210 G 3050 2600
SVP 8 16,00 G 0.98 210 G 3050 2600
SVP 8,5 17,00 G 1.04 210 G 3050 2600
SVP 9 18,00 G 1.10 210 G 3050 2600
SVP 10 20,00 G 1.22 210 G 3050 2600
SVP 11 22,00 G 1.34 210 G 3050 2600
SVP 12,5 25,00 G 1.53 210 G 3050 2600
SVP 14 28,00 G 1.71 210 G 3050 2600
SVP 15 30,00 G 1.83 210 G 3050 2600

PLATA DVP cm3/rev G in3/rev bar G psi min1

DVP 7,8 7,80x2 G 0.48x2 210 G 3050 2600
DVP 8 8,00x2 G 0.49x2 210 G 3050 2600
SVP and DVP features
DVP 8,5 8,50x2 G 0.52x2 210 G 3050 2600
Compact design DVP 9 9,00x2 G 0.55x2 210 G 3050 2600
Torque limiter
DVP 10 10,00x2 G 0.61x2 210 G 3050 2600
Energy savings
Low noise emission DVP 11 11,00x2 G 0.67x2 210 G 3050 2600
Long service life DVP 12,5 12,50x2 G 0.76x2 210 G 3050 2600
DVP 14 14,00x2 G 0.85x2 210 G 3050 2600
DVP 15 15,00x2 G 0.91x2 210 G 3050 2600

Gear pump cm3/rev G in3/rev bar G psi min1

KP 204 4,95 G 0.30 285 G 4150 2600
KP 206,3 6,61 G 0.40 285 G 4150 2600
KP 208 8,26 G 0.50 285 G 4150 2600
KP 2011,2 11,23 G 0.69 275 G 4000 2600
KP 2014 14,53 G 0.89 265 G 3850 2600
KP 2016 16,85 G 1.03 260 G 3750 2600
KP 2020 21,14 G 1.29 210 G 3050 2600

20 DOC 03 R E
Hand pumps

Up Easy series
Double acting hand pumps providing flow in both directions of lever movement.
Displacement from 12 cm3/cycle G 0.73 in3/cycle to 45 cm3/cycle G 2.75 in3/cycle.
Max. pressure 315 bar G 4600 psi.

Main characteristics

Displacement Max. pressure

Up Easy cm3/cycle G in3/cycle bar G psi

EP 12 12 G 0.73 315 G 4600
EP 25 25 G 1.53 250 G 3600
EP 45 45 G 2.75 220 G 3200

Features
New interchange modular design for maximum
flexibility
Same pumping group with or without reservoir
Suitable for auxiliary or emergency applications

DOC 03 R E 21
22 DOC 03 R E
 Product range

Suction filters
In line filters spin-on
Tank mounted return line filters
In line medium and high pressure filters
Accessories

DOC 03 R E 23
 IKRON Fluid Filtration, real specialist in IKRON S.r.l.
Via Prampolini, 2
designing and manufacturing of hydraulic 43044 Lemignano Di Collecchio
filters. More than fifty years of experience Parma (Italy)
Tel. (+39) 0521 30 49 11
taught Casappa just how important filtering is Fax (+39) 0521 30 49 00
IP Videoconferencing
to optimise hydraulic control system efficiency
E-mail: [email protected]
and to extend component service life. www.ikron.it

Since its foundation, IKRON has followed the

ISO 9001:2000 procedures, guaranteeing
the care and professionalism for which its
production has always been distinguished,
from design to delivery. This is why our
customers rely on IKRON every day.

24 DOC 03 R E
 IKRON uses virtual simulation tools during
the design phase to analyse and predict how Ikron offers a wide range of filters and accessories.
its products will behave when installed in the Suction filters, return filters, in line spin-on filters,
hydraulic circuit. medium and high pressure filters.
Clogging indicators, level and temperature gauges,
filler breathers.

DOC 03 R E 25
 Filters and accessories

Suction filters
The tank submerged suction filters are designed to be fitted directly on pump intake and provide versatility to safeguard the
hydraulic components from contaminating particles.

HF 410-412 series
Bypass valve

Main characteristics

Nominal flow up to Degree of filtration*

Type l/min G US gpm MS (m) MI (m)
HF 410 300 G 79 90 25-60-125250
HF 412 140 G 37 90 25-60-125250

In line filters spinon

These filters are specifically designed to be connected on the suction or in the return line of the hydraulic circuit and provide
versatility to safeguard the circuit components from contaminating particles.

HF 620625 series
Easy filtering elements replacement
Differential visual indicator
Interchangeable with major manufacturers

HF 650 series
Easy filtering elements replacement
High filtration performances
Operating pressure 35 bar G 510 psi
Interchangeable with major manufacturers

Main characteristics

Nominal flow up to Operating pressure Degree of filtration*

Type l/min G US gpm bar G psi FG (m) MS (m) SP (m) RP (m)
HF 620 400 G 106 12 G 174 1025 6090125 1025
HF 625 200 G 53 25 G 360 1025 6090125 1025
HF 650 180 G 48 35 G 510 36101625 1025

NOTES
(*): FG = microfibre glass / MS = zinc plated steel wire mesh / MI = stainless steel wire mesh / SP = cellulose / RP = reinforced cellulose

26 DOC 03 R E
Filters and accessories

Tank mounted return line filters

These filters are specifically designed to be directly connected on the hydraulic circuits return line and provide versatility to
safeguard the circuit components from contaminating particles.

HF 502 series
Operating pressure 8 bar G 115 psi
Interchangeable with major manufacturers
Filler cap

HF 550 series
Oversize filtering surface
Filler cap

HF 547 series
Air breather (available also with pressurized version)
Antisplash system
Anodized housing
Flange with four holes (only HF 547-20)

HF 554 series
Air breather (available also with pressurized version)
Antisplash system
Anodized housing

HF 570575 series
Insidetooutside flow direction
Magnetic prefiltration
Filler cap
Interchangeable with major manufacturers

Main characteristics

Nominal flow up to Operating pressure Degree of filtration*

Type l/min G US gpm bar G psi FG (m) FB (m) MS (m) MI (m) SP (m) RP (m)
HF 502 800 G 210 8 G 115 361025 60125 90250 25 1025 1025
HF 550 600 G 158 8 G 115 361025 60125 90250 25 1025 1025
HF 547 200 G 53 8 G 115 361025 60125 90250 25 1025 1025
HF 554 200 G 53 8 G 115 361025 60125 90250 25 1025 1025
HF 570 1000 G 264 8 G 115 1025 1025
HF 575 1000 G 264 8 G 115 1025 1025

NOTES
(*): FG = microfibre glass / FB = phosphor bronze / MS = zinc plated steel wire mesh / MI = stainless steel wire mesh/ SP = cellulose /
RP = reinforced cellulose

DOC 03 R E 27
 Filters and accessories

In line medium and high pressure filters

The inline medium and high pressure filters are specifically designed to be connected on the pressure line of
the hydraulic circuit and provide versatility to safeguard the circuit components from contaminating particles.

HF 705 series
Sintered bronze filter element
Bidirectional flow
Aluminium housing

HF 710 series
Aluminium housing
Operating pressure 250 bar G 3600 psi
Compact design and lightness
By-pass valve
Filtration ratio x 200

HF 725 series
CETOP 3 and CETOP 5 connections with reference to ISO4401
Operating pressure 350 bar G 4350 psi
Modular assembly
Compact design
Filtration ratio x 200

Main characteristics

Nominal flow Operating Degree of filtration*

up to pressure
Type l/min G US gpm bar G psi FG (m) MI (m) SB (m)
HF 705 65 G 17.2 350 G 5100 10-25-40-60
HF 710 35 G 9.2 250 G 3600 361025
HF 725 40 G 10.6 350 G 5100 361025 10-25

NOTES (*): FG = micro-fibre glass / MI = stainless steel wire mesh / SB = sintered bronze

28 DOC 03 R E
Filters and accessories

In line medium and high pressure filters

HF 735 series
Multilayer system
Flanged directly on valve blocks and hydraulic PowerPack
Filtration ratio x 200

HF 745 series
Iinterchangeable with major manufacturers
Multilayer system
Filtration ratio x 200

HF 760 series
Multilayer system
Wide range 20 30 40
Iinterchangeable with major manufacturers
Filtration ratio x 200

Main characteristics

Nominal flow Operating Degree of filtration*

up to pressure
Type l/min G US gpm bar G psi FG (m)
HF 735 150 G 40 320 G 4650 361025
HF 745 170 G 45 280 G 4050 361025
HF 760 450 G 120 420 G 6100 361025

NOTES (*): FG = micro-fibre glass

DOC 03 R E 29
 Filters and accessories

Accessories
Filler breathers - Air filters - Level and temperature gauges - Pressure gauges - Pressure/Vacuum gauges - Clogging
indicators: visual, electrical, visual differential and electrical visual differential.

30 DOC 03 R E
DOC 03 R E Edition: 03/05.2010 Replaces: DOC 02 R E

HYDRAULICS
PUMPS, MOTORS
Headquarters:
& FILTERS
CASAPPA S.p.A.
Via Balestrieri, 1
43044 Lemignano di Collecchio
Parma (Italy)
Tel. (+39) 0521 30 41 11
Fax (+39) 0521 80 46 00
IP Videoconferencing
E-mail: [email protected]
www.casappa.com