Analysis of Rates 07 Vol - 2

Kindly Save this file on desired location in your computer
GOVERNMENT OF INDIA
CENTRAL PUBLIC WORKS DEPARTMENT
ANALYSIS OF RATES
FOR DELHI
(V0L.2)
2007
PUBLISHED BY:
DIRECTOR GENERAL OF WORKS, CPWD, NIRMAN BHAWAN, NEW DELHI
© All rights reserved. No part of this publication, either in English or in Hindi, may be reproduced in
any form or by any means, electronic or mechanical, including photocopy, recording or any
information storage and retrieval system, without permission, in writing, from the Director General
(Works), CPWD, New Delhi. Photocopying of this book is strictly prohibited
A GOVERNMENT OF INDIA PUBLICATION
Published by
DIRECTOR GENERAL (WORKS)
CPWD, NIRMAN BHAWAN, NEW DELHI-110 011
&
Printed & Marketed by
JAIN BOOK AGENCY
Authorised Dealers of Govt. Publications
C-9, Connaught Place, New Delhi-110001
Phones : 23416390 upto 97, 41513852
E-mail : [email protected]
Website : www.jainbookagency.com
Distributed by
JBA DISTRIBUTORS
N-67, First Floor, Munshiram Building,
Connaught Place, New Delhi-110001
Phone : 41523870, 23354824 Fax : 41513850
E-mail : [email protected]
Website : www.jba.in
JAIN BOOK AGENCY (SOUTHEND) JAIN BOOK AGENCY (GURGAON)

1, Aurobindo Place Market, 12, Central Plaza Mall, Sector 53,
Hauz Khas, New Delhi-110016 Golf Course Road,
Phone : 26567066, 26566113,41758700 Gurgaon 122002 Haryana
E-mail : [email protected] Phone : 4143020,
Website : www.jainbookagency.com Moblile 9810666810
DIAL-A-BOOK
 011-4175 8700
Books will be delivered next day by COURIER
(Payment to courier-boy)
in Delhi, Noida, Ghaziabad, Faridabad &
Gurgaon (nominal courier charges extra)
Also available at
All Leading Booksellers & Authorised Govt. Dealers In India
Price : Rs. 3000/- per set of two volumes (excluding postage and forwarding charges etc.)
FOREWORD
Central Public Works Department Analysis of Rates for Delhi is a very comprehensive and
useful document. It is based on scientific assessment of inputs of materials, labour and machinery
in various items of work normally encountered in a project.
It was first compiled in the year 1950, followed by publication or revisions in 1955, 1962, 1972,
1977, 1985 and 1997. Since publication of DAR, 1997, prices of labour and materials have registered
substantial increase. Besides the increased cost, there has been a spurt of new construction
materials and introduction of mechanised construction techniques for speedier construction. This
has necessitated revision of existing DAR, 1997 to include the above changes. Accordingly, this
Analysis of Rates for Delhi, 2007 has been prepared incorporating element of machinery and
prefabricated building components, wherever applicable.
Earlier C.P.W.D. Analysis of Rates for Delhi was a confidential document and was issued to
CPWD Officers and Government Departments only. In this age of transparency, we feel that this
is an anachronism. Therefore, for the first time DAR, 2007 is being published as an open document
and shall be available in two volumes. This will facilitate in obtaining feed back from the construction
industry and the professionals for continuous updation and improvement in the document.
Although DAR, 2007 contains most of the items of DAR, 1997, analysis of items which are
either obsolete or are not in use have been deleted. Similarly, analysis of many items have been
modified to correspond to items of DSR, 2007. Several new analysis of items pertaining to new
materials and new technologies in the construction sector have also been included. Analysis
of rates of many items also incorporate element of machinery instead of the lump sum provisions.
I wish to place on record the technical input and the effective coordination on the part of Shri
D.S.Sachdev, ADG(TD) and the efforts put in by Shri Suresh Kumar, CE(CSQ) and his team of
officers in TAS unit in finalising DAR, 2007 in a record time.
I am sure that C.P.W.D. Analysis of Rates for Delhi, 2007 along with Delhi Schedule of Rates,
2007 shall be a useful document to a number of departments, public sector undertakings, private
sector builders and architects etc.
(K. Srinivasan)
DIRECTOR GENERAL (WORKS)
New Delhi
February, 2008
PREFACE
1.0 C.P.W.D. Analysis of Rates for Delhi, 2007 is the revised edition of C.P.W.D. Analysis of
Rates for Delhi, 1997.
2.0. DAR, 2007 incorporates most of the analysis of DAR, 1997 with all correction slips up-to
date and will replace DAR, 1997.
3.0 DAR, 2007 is a bilingual document (Hindi version will follow).
4.0 DAR, 2007 is published in two volumes as under:
Volume Number Sub-head No. Contents/ Chapters

00 Basic Rates
01 Carriage of materials
02 Earth Work
03 Mortars
04 Concrete Work
05 Reinforced Cement Concrete Work
One 06 Brick Work
07 Stone Work
08 Marble Work
09 Wood and PVC Work
10 Steel Work
11 Flooring
12 Roofing
13 Finishing
14 Repairs to Buildings
15 Dismantling and Demolishing
Two 16 Road Work
17 Sanitary Installation
18 Water Supply
19 Drainage
20 Pile Work
21 Aluminium Work
22 Water Proofing
23 Horticulture and Landscape
5.0 Analysis of many items in DAR, 2007, which are either obsolete or are not in use, have
been deleted. Similarly, analysis of many items have been modified to correspond to items
of DSR, 2007. Several new analysis of items pertaining to new materials and new
technologies in the construction sector have also been included. Analysis of rates of many
items also incorporate element of machinery instead of lump sum provisions.
6.0 Analysis have been modified to include execution of different works by using various
electrical and mechanical equipments i.e. excavators, tower cranes, mobile cranes,
mechanical platforms, Batch Mix plant, transit mixers and pumps, piling rigs, pneumatic
cutters, chisels, chippers, hammers etc. Built-in provision has been taken in the analysis
of rates for new construction technology/ mechanisation.
3
7.0 Analysis of dry work using prefabricated materials and pre-finished elements for speedier
construction are included viz gypsum block walls, calcium silicate and non-asbestos cement
board partitions, pre-finished counter tops for kitchen and washbasins, pre-moulded and
pre-finished stone work in risers and treads of steps and window sills, dry stone cladding,
sub-frames for windows, use of chemical and mechanical fasteners, laying of tiles in flooring
and dado with polymer based adhesives etc.
8.0 DAR, 2007 is based on the study of current market rates of materials at Delhi, collected
during the period of April, 2007 to October, 2007. Generally, the basic rates of materials,
incorporated in the analysis, pertain to materials conforming to BIS Standards/CPWD
Specifications/Materials of best quality available in the market.
Labour rates are the minimum wages issued by the Government of Delhi w.e.f. 01-09-2007.
9.0 Lump sum provision of labour/ T& P is replaced with mechanisation inputs. Prominent
items incorporating mechanization are earth-work in excavation, RMC / BMC, brick work
in superstructure above floor V level, road work, dismantling of R.C.C. work, dismantling
of C.C. and flexible pavements, pile work etc.
10.0 Number of uses of steel and wooden shuttering have been reduced from 80 and 16 times
to 40 and 8 times respectively, so that proper quality of shuttering is put to use.
11.0 Contractor’s profit and Overheads @ 15% ( CP=7.5% & OH 7.5%) has been adopted as
approved by the DGW vide Office Memorandum no. DG(W)MAN/150 dated 14-12-2007.
12.0 Sundries have been considered as 1.00 times based on Cost Index of Delhi as 100 over
DPAR 01-10-2007.
13.0 A lot of effort has gone into the preparation of this Analysis of Rates. I convey my
deep appreciation and sincere thanks to Shri Suresh Kumar, CE, CSQ, Shri Mayank
Tilak, S.E. (TAS), Sh. S.K.Jain EE(S&S) –I, Sh.S.C. Malik EE (S&S) -II,
Sh. A.V.R.Bhat EE (S&S) – III, Sh. V.P.Singh AE, Sh. H.N.Singh AE, Sh. S.K.Sarkar
AE, Sh.L.C.Gothwal AE, Sh.G.K. Jindal AE, Sh. S.S.Pal AE, Sh. Bahal Singh
D/Man Gr-I, Sh Upender Walia D/Man Gr.-I and other officers and staff of TAS Unit
for sincere efforts made in the preparation of this document in such a short time.
14.0 Due care has been taken to print the C.P.W.D. Analysis of Rates for Delhi as correctly as
possible. It is, however possible that some errors might have crept in. In case any error or
omission is noticed, it may be brought to the notice of the Superintending Engineer
(TAS), CPWD, Room no. 418, A- wing, Nirman Bhawan, New Delhi.
15.0 In case of any discrepancy between English and Hindi versions, the English version shall
be held valid. Suggestions for improvement are welcome.
(D.S.SACHDEV)
ADG (TD), CPWD,
Nirman Bhawan, New Delhi
New Delhi
February, 2008
Contents
Vol. 2
SH. NO. NAME OF SUB HEAD PAGE NO.
13. Finishing 583-635
14. Repairs to Buildings 637-692
15. Dismantling & Demolishing 693-729
16. Road Work 731-817
17. Sanitary Installation 819-900
18. Water Supply 901-1067
19. Drainage 1069-1152
20. Pile Work 1153-1178
21. Aluminium Work 1179-1203
22. Water Proofing 1205-1224
23. Horticulture and Landscaping 1225-1241
Note: For Sub Heads 1 to 12 refer to Vol.1

583
SUB HEAD : 13.0

FINISHING
585
13.1 12 mm cement plaster of mix:
13.1.1 1:4 (1 cement : 4 fine sand)
Code Description Unit Quantity Rate Amount
Detail of cost for 10 sqm

MATERIALS
Cement mortar 1 : 4 (1 cement: 4 fine sand). cum 0.144 2,278.85 328.15
(Rate as per item no. 3.4)
0155 Mason Day 0.67 146.55 98.19
0115 Coolie Day 0.75 135.25 101.44
0101 Bhisti Day 0.92 138.45 127.37
9999 Scaffolding and sundries L.S 12.61 1.00 12.61
TOTAL 667.76
Add 1% for water charges 6.68
TOTAL 674.44
Add 15% for contractor’s profit and overheads 101.17
Cost of 10.00 sqm 775.61
Cost of 1.00 sqm 77.56
Say 77.55


MATERIALS
LABOUR
0155 Mason Day 0.67 146.55 98.19
0115 Coolie Day 0.75 135.25 101.44
0101 Bhisti Day 0.92 138.45 127.37
TOTAL 582.64
TOTAL 588.47
Cost of 10.00 sqm 676.74
Say 67.65
13. 2 15 mm cement plaster on rough side of single or half brick wall of mix:-

MATERIALS
Cement mortar 1: 4 (1 cement: 4 fine sand). cum 0.172 2,278.85 391.96
LABOUR
0155 Mason Day 0.80 146.55 117.24
0115 Coolie Day 0.88 135.25 119.02
0101 Bhisti Day 0.99 138.45 137.07
TOTAL 777.90
586

TOTAL 785.68
Cost of 10.00 sqm 903.53
Say 90.35
13.2 15 mm cement plaster on the rough side of single or half brick wall of mix :
13.2.2 1: 6 (1 cement: 6 fine sand)

MATERIALS
Cement mortar 1:6 (1 cement: 6 fine sand).
(Rate as per item no. 3.6) cum 0.172 1,687.70 290.28
LABOUR
0155 Mason Day 0.80 146.55 117.24
0115 Coolie Day 0.88 135.25 119.02
0101 Bhisti Day 0.99 138.45 137.07
TOTAL 676.22
TOTAL 682.98
Cost of 10.00 sqm 785.43
Say 78.55
13.1 20 mm cement plaster of mix

13.3.1 1:4 (1 cement : 4 find sand)

MATERIALS
Cement mortar 1:4 (1 cement: 4 fine sand). cum 0.224 2,278.85 510.46
LABOUR
0155 Mason Day 0.94 146.55 137.76
0115 Coolie Day 1.02 135.25 137.96
0101 Bhisti Day 1.10 138.45 152.30
TOTAL 951.09
TOTAL 960.60
Cost of 10.00 sqm 1,104.69
Cost of 1.00 sqm 110.47
Say 110.45
587

13.3.2 1:6 (1 cement : 6 find sand)

MATERIALS
LABOUR
0155 Mason Day 0.94 146.55 137.76
0115 Coolie Day 1.02 135.25 137.96
0101 Bhisti Day 1.10 138.45 152.30
TOTAL 818.67
TOTAL 826.86
Cost of 10.00 sqm 950.89
Say 95.10

13.4.1 1:4 (1 cement : 4 coarse sand)

MATERIALS
Cement mortar - 1:4 cum 0.144 2,578.45 371.30
LABOUR
0155 Mason Day 0.67 146.55 98.19
0115 Coolie Day 0.75 135.25 101.44
0101 Bhisti Day 0.92 138.45 127.37
TOTAL 710.91
TOTAL 718.02
Cost of 10.00 sqm 825.72
Say 82.55

13.4.2 1:6 (1 cement : 6 coarse sand)
MATERIALS
Cement mortar -1:6 cum 0.144 1987.30 286.17
LABOUR
0155 Mason Day 0.67 146.55 98.19
0115 Coolie Day 0.75 135.25 101.44
0101 Bhisti Day 0.92 138.45 127.37
588
TOTAL 625.78
TOTAL 632.04
Cost of 10.00 sqm 726.85
Say 72.70
13.5 15 mm cement plaster on rough side of single or half brick wall of mix :
13.5.1 1:4 (1 cement: 4 coarse sand)

MATERIALS
Cement mortar 1:4 cum 0.172 2,578.45 443.49
LABOUR
0155 Mason Day 0.80 146.55 117.24
0115 Coolie Day 0.88 135.22 119.02
0101 Bhisti Day 0.99 138.45 137.07
TOTAL 829.43
TOTAL 837.72
Cost of 10.00 sqm 963.38
Say 96.35
13.5 15 mm cement plaster on rough side of single or half brick wall of mix

MATERIALS
Cement mortar 1 : 6 cum 0.172 1987.30 341.82
LABOUR
0155 Mason Day 0.80 146.55 117.24
0115 Coolie Day 0.88 135.25 119.02
0101 Bhisti Day 0.99 138.45 137.07
TOTAL 727.76
TOTAL 735.04
Cost of 10.00 sqm 845.30
Say 84.55
589
13.6 20 mm cement plaster of mix : -


MATERIALS
Cement mortar 1 : 4 (1 cement : 4 coarse sand) cum 0.224 2,578.45 577.57
LABOUR
0155 Mason Day 0.94 146.55 137.76
0115 Coolie Day 1.02 135.25 137.96
0101 Bhisti Day 1.10 138.45 152.30
TOTAL 1,018.20
TOTAL 1,028.38
Cost of 10.00 sqm 1,182.64
Cost of 1.00 sqm 118.26
Say 118.25
13.6 20 mm cement plaster of mix :


MATERIALS
Cement mortar 1 :6 cum 0.224 1,987.30 445.16
LABOUR
0155 Mason Day 0.94 146.55 137.76
0115 Coolie Day 1.02 135.22 137.96
0101 Bhisti Day 1.10 138.45 152.30
TOTAL 885.79
TOTAL 894.65
Cost of 10.00 sqm 1,028.85
Cost of 1.00 sqm 102.89
Say 102.90
13.7 12 mm cement plaster finished with a floating coat of neat cement of mix :
13.7.1 1:3 ( 1 cement : 3 fine sand)

MATERIALS
Cement mortar 1 : 3 cum 0.144 2,870.00 413.28
LABOUR
0155 Mason Day 0.67 146.55 98.19
0115 Coolie Day 0.75 135.25 101.44
590

0101 Bhisti Day 0.92 138.45 127.37
0367 Cement tonne 0.02 4,500.00 90.00
2209 Carriage of Cement tonne 0.02 47.29 0.95
0155 Mason Day 0.27 146.55 39.57
0115 Coolie Day 0.27 135.25 36.52
TOTAL 927.99
TOTAL 937.27
Cost of 10.00 sqm 1077.86
Cost of 1.00 sqm 107.78
Say 107.80
13.7 12 mm cement plaster finished with a floating coat of neat cement of mix
13.7.2 1:4 (1 cement: 4 fine sand)

MATERIALS
CemenLmortar 1:4 cum 0.144 2,278.85 328.15
(Rate as per item No. 3.4)
LABOUR
0155 Mason Day 0.67 146.55 98.19
0115 Coolie Day 0.75 135.25 101.44
0101 Bhisti Day 0.92 138.45 127.37
0367 Cement tonne 0.02 4,500.00 90.00
0155 Mason Day 0.27 146.55 39.57
0115 Coolie Day 0.27 135.25 36.52
TOTAL 842.86
Add 1 % for water charges 8.43
TOTAL 851.29
Cost of 10.00 sqm 978.98
Say 97.90
13.8 15 mm cement plaster on rough side of single or half brick wall finished with a
floating coat of neat cement of mix :

MATERIALS
Cement rnortar 1 :3 cum 0.172 2,278.85 493.64
(Rate as item no. 3.3)
LABOUR
0155 Mason Day 0. 80 146.55 117.24
591

0115 Coolie 119.02
Day 0.88 135.25
0101 Bhisti 137.07
Day 0.99 138.45
9999 Scaffolding and sundries 12.61
L.S 12.61 1.00
0367 Cement 90.00
tonne 0.02 4,500.00
2209 Carriage of Cement 0.95
tonne 0.02 47.29
0155 Mason 39.57
Day 0.27 146.55
0115 Coolie 36.52
Day 0.27 135.25
9999 Scaffolding and sundries 8.06
L.S 80.6 1.00
TOTAL 1,054.68
TOTAL 1,065.23
Cost of 10.00 sqm 1,225.01
Cost of 1.00 sqm 122.50
Say 122.50
13.8 15 mm cement plaster on rough side of single or half brick wall finished with a
floating coat of neat cement of mix :

MATERIALS
Cement rnortar 1 :4 cum 0.172 2,278.85 391.96
(Rate as item no. 3.4)
LABOUR
0155 Mason Day 0.80 146.55 117.24
0115 Coolie Day 0.88 135.25 119.02
0101 Bhisti Day 0.99 138.45 137.07
0367 Cement tonne 0.02 4,500.00 90.00
0155 Mason Day 0.27 146.55 39.57
0115 Coolie Day 0.27 135.25 36.52
TOTAL 953.00
TOTAL 962.53
Cost of 10.00 sqm 1,106.91
Cost of 1.00 sqm 110.69
Say 110.70
592
13.9 Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat
cement.
13.9.1 12mm cement plaster.

MATERIALS
2112 Cement rnortar cum 0.144 3,169.60 456.42
LABOUR
0155 Mason Day 0.67 146.55 98.19
0115 Coolie Day 0.75 135.25 101.44
0101 Bhisti Day 0.92 138.45 127.37
0367 Cement tonne 0.02 4,500.00 90.00
0155 Mason Day 0.27 146.55 39.57
0115 Coolie Day 0.27 135.25 36.52
TOTAL 971.13
TOTAL 980.84
Cost of 10.00 sqm 1,127.97
Cost of 1.00 sqm 112.80
Say 112.80
13.9 Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat
cement.
13.9.2 20 mm cement plaster.

MATERIALS
2112 Cement rnortar cum 0.224 3,169.60 709.99
LABOUR
0155 Mason Day 0.94 146.55 137.76
0115 Coolie Day 1.03 135.25 137.96
0101 Bhisti Day 1.10 138.45 152.30
0367 Cement tonne 0.02 4,500.00 90.00
0155 Mason Day 0.27 146.55 39.57
0115 Coolie Day 0.27 135.25 36.52
TOTAL 1,325.72
TOTAL 1,338.98
Cost of 10.00 sqm 1,539.83
Cost of 1.00 sqm 153.98
Say 154.00
593
13.10 15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of
neat cement on the roughside of single or half brick wall.

MATERIALS
Cement rnortar 1 : 3 (1 cement : 3 coarse sand) cum 0.172 3,169.60 545.17
LABOUR
0155 Mason Day 0.80 146.55 117.24
0115 Coolie Day 0.88 135.25 119.02
0101 Bhisti Day 0.99 138.45 137.07
0367 Cement tonne 0.02 4,500.00 90.00
0155 Mason Day 0.27 146.55 39.57
0115 Coolie Day 0.27 135.25 36.52
TOTAL 1,106.21
TOTAL 1,117.27
Cost of 10.00 sqm 1,284.86
Cost of 1.00 sqm 128.49
Say 128.50
13.11 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5
(1 cement : 5 coarse sand) finished with a top layer 6mm thick cement plaster
1:6 (1 cement: 6 fine sand).

MATERIALS
Under layer Cement mortar 1:5(1 cement: 5 cum 0.144 2,260.15 325.46
coarse sand)
Top layer cement mortar 1:6(1 cement: 6 fine
sand). (Rate as per item 3.6)
LABOUR
0155 Mason Day 1.21 146.55 177.33
0115 Coolie Day 1.29 135.25 174.47
0101 Bhisti Day 1.05 138.45 145.37
TOTAL 956.75
TOTAL 966.32
Add 15%for contractor’s profit and overheads 144.95
Cost of 10.00 sqm 1111.27
Cost of 1.00 sqm 111.13
Say 111.15
594
13.12 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5
(1 cement: 5 coarse sand) and a top layer 6mm thick cement plaster 1:3(1 cement:
3 coarse sand) finished rough with sponge.

MATERIALS
Under layer Cement mortar 1:5(1 cement: 5 cum 0.144 2,260.15 325.46
coarse sand) (Rate as per item no. 3.10)
Top layer cement mortar 1:3(1 cement: 3 cum 0.072 3,169.60 228.21
coarse sand). (Rate as per item no. 3.8)
LABOUR
0155 Mason Day 1.21 146.55 177.33
0115 Coolie Day 1.29 135.25 174.47
0101 Bhisti Day 1.05 138.45 145.37
TOTAL 1,063.45
TOTAL 1,074.08
Add 15 % for contractor’s profit and overheads 161.11
Cost of 10.00 sqm 1,235.19
Cost of 1.00 sqm 123.52
Say 123.50
13.13 12 mm cement plaster 1 : 2 ( 1 cement : 2 stone dust)

MATERIALS
LABOUR
0155 Mason Day 0.67 146.55 98.19
0115 Coolie Day 0.75 135.22 101.44
0101 Bhisti Day 0.92 138.45 127.37
TOTAL 909.74
TOTAL 918.84
Cost of 10.00 sqm 1,056.67
Cost of 1.00 sqm 105.67
Say 105.65
595
13.14 15 mm cement plaster 1 : 2 ( 1 cement : 2 stone dust) on the rough side of single or
half brick wall.

MATERIALS
Cement mortar 1 : 2 cum 0.172 3,959.25 680.99
LABOUR
0155 Mason Day 0.80 146.55 117.24
0115 Coolie Day 0.88 135.22 119.02
0101 Bhisti Day 0.99 138.45 137.07
TOTAL 1,066.93
TOTAL 1,077.60
Cost of 10.00 sqm 1239.24
Cost of 1.00 sqm 123.92
Say 123.90
13.15 20 mm cement plaster 1 : 2 ( 1 cement : 2 stone dust)


MATERIALS
LABOUR
0155 Mason Day 0.94 146.55 137.76
0115 Coolie Day 1.02 135.22 137.96
0101 Bhisti Day 1.10 138.45 152.30
TOTAL 1,327.50
TOTAL 1,340.78
Cost of 10.00 sqm 1,541.90
Cost of 1.00 sqm 154.19
Say 154.20

13.16.1 1:3 ( 1 cement : 3 fine sand)

MATERIALS
LABOUR
0155 Mason Day 0.51 146.55 74.74
0115 Coolie Day 0.75 135.25 101.44
0101 Bhisti Day 0.92 138.45 127.37
596
9999 Extra for removing burrs, cleaning with wire L.S 13.39 1.00 13.39
brushes, pock making with pointed tool etc.
complete.
TOTAL 535.28
TOTAL 540.63
Cost of 10.00 sqm 621.72
Say 62.15
13.17 6 mm cement plaster 1:3 (1 cement : 3 fine sand) Finished with a flooting coat of
neat cement and thick coat of lime wash on top of walls when dry for bearing of
R.C.C slabs and beams.

MATERIALS
Cement mortar 1:3 (Rate as per item no. 3.3) cum 0.072 2,870.00 206.64
LABOUR
0155 Mason
0115 Coolie Day 0.51 146.55 74.74
0101 Bhisti Day 0.75 135.25 101.44
9999 Extra for removing burrs, cleaning with wire Day 0.92 138.45 127.37
brushes, pock making with pointed tool etc. L.S 13.39 1.00 13.39
complete. 11.70
9999 Scaffolding and sundries L.S 11.70 1.00
0367 Cement tonne 0.02 4,500.00 90.00
0155 Mason Day 0.27 146.55 39.57
0115 Coolie Day 0.27 135.25 36.52
0776 Satna lime quintal 0.01 178.00 1.78
9999 Indigo gum etc L.S 2.08 1.00 2.08
9999 Sundries ladder etc. L.S 0.52 1.00 0.52
0141 White Washer Day 0.07 138.45 9.69
0115 Coolie Day 0.07 135.25 9.47
9999 Sundries L.S 2.73 1.00 2.73
TOTAL 736.65
TOTAL 744.02
Cost of 10.00 sqm 855.62
Say 85.55
597
13.18 Neat cement punning

LABOUR
0367 Cement tonne 0.022 4,500.00 99.00
0155 Mason Day 0.27 146.55 39.57
0115 Coolie Day 0.27 135.25 36.52
TOTAL 184.19
TOTAL 186.03
Cost of 10.00 sqm 213.93
Say 21.40
13.19 Rough cast plaster upto 10m height above ground level with a mixture of sand and
gravel or crushed stone from 6mm to 10mm nominal size dashed over and including
the fresh plaster in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4
coarse sand) and top layer 10mm cement plaster 1:3 (1 cement : 3 fine sand) mixed
with 10% finely grounded hydrated lime by volume of cement.
13.19.1 Ordinary cement finish using ordinary cement

MATERIALS
Under layer 12 mm thick cement plaster cum 0.144 2,578.45 371.30
Cement mortar 1:4(1 cement: 4 coarse sand).
0155 Mason Day 0.67 146.55 98.19
0115 Beldar Day 0.75 135.25 101.44
0101 Bhisti Day 0.92 138.45 127.37
Top layer 10 mm thick cement plaster
3.3 Cement mortar 1:3 (1 cement: 3 fine sand). cum 0.12 2,870.00 344.40
0155 Mason Day 0.61 146.55 89.40
0114 Beldar Day 0.69 135.25 93.32
0101 Bhisti Day 0.85 138.45 117.68
1179 Sand and gravel or crushed stone 6 mm to 10 cum 0.10 675.00 67.50
mm size
0101 Bhisti Day 0.01 138.45 1.38
0777 Grounded hydrated lime (factory made) quintal 0.09 177.00 15.93
9999 Carriage of lime L.S 1.40 1.00 3.64
0155 Mason Day 0.50 146.55 73.28
0114 Beldar Day 0.50 135.25 67.62
0101 Bhisti Day 0.10 138.45 13.84
Labour for scooping
0123 Mason 1st class Day 0.25 151.50 37.88
0114 Beldar Day 0.25 135.25 33.81
TOTAL 1,687.62
TOTAL 1,704.50
598

Cost of 10.00 sqm 1,960.18
Cost of 1.00 sqm 196.02
Say 196.00
13.20 Pebble dash plaster upto 10m height above ground level with a mixture of washed
pebble or crushed stone 6mm to 12.5 mm nominal size dashed over and including
the fresh plaster in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4
coarse sand) and top layer 10mm cement plaster 1:3 (1 cement : 3 fine sand) mixed
with 10% finely grounded hydrated lime by volume of cement.
MATERIALS
Under layer 12 mm thick cement plaster cum 0.144 2,578.45 371.30
LABOUR
0155 Mason Day 0.67 146.55 98.19
0114 Beldar Day 0.75 135.25 101.44
0101 Bhisti Day 0.92 138.45 127.37
Top layer 10 mm thick cement plaster
0155 Mason Day 0.61 146.55 89.40
0114 Beldar Day 0.69 135.25 93.32
0101 Bhisti Day 0.85 138.45 117.68
1179 Sand and gravel or crushed stone 2.36 mm to cum 0.10 675.00 67.50
12.5 mm size
0101 Bhisti Day 0.01 138.45 1.38
0777 Grounded hydrated lime (factory made) quintal 0.09 177.00 15.93
0155 Mason Day 0.50 146.55 73.28
0114 Beldar Day 0.50 135.25 67.62
0101 Bhisti Day 0.10 138.45 13.84
TOTAL 1,620.35
TOTAL 1,636.55
Cost of 10.00 sqm 1,882.03
Cost of 1.00 sqm 188.20
Say 188.20
13.21 Extra for providing and mixing water proofing material in cement plaster work in
proportion recommended by the manufacturers.
Detail of cost for 12 mm cement plaster 1:3

(1 Cement: 3 sand) = 10 sqm. or 1.48 bags of
cement used in the mix
Cement required for 10 sqm = 73.89 kg.
Water proofing material required @ 1 kg per
599

50 kg of cement = 1.48 kg.
1213 Water proofing materials kilogram 1.48 20.00 29.60
9999 Sundries L.S 7.15 1.00 7.15
TOTAL 36.75
TOTAL 37.12
Add 15 % for contractor’s profit and 5.57
overheads
Cost for 1.48 bags of cement used in
the mix 42.69
Cost for 1.00 sqm 28.84
Say 28.85
13.22 Extra for plastering exterior walls of height more than 10 m from ground level for
every additional height of 3 m or part thereof.

LABOUR
0155 Mason Day 0.20 146.55 29.31
0115 Coolie Day 0.30 135.25 40.57
0101 Bhisti Day 0.10 138.45 13.84
9999 Sundries L.S 7.15 1.00 7.15
TOTAL 144.69
TOTAL 146.14
Add 15% for contractor’s profit and 21.92
overheads
Cost of 10.00 sqm 168.06
Say 16.80
13.23 Extra for plastering on circular work not exceeding 6 m in radius:

13.23.1 In one coat

LABOUR
0155 Mason Day 0.20 146.55 29.31
0114 Beldar Day 0.20 135.25 27.05
9999 Sundries L.S 7.15 1.00 7.15
TOTAL 63.51
TOTAL 64.15
Cost of 10.00 sqm 73.77
Say 7.40
600
13.23 Extra for plastering on circular work not exceeding 6 m in radius:
13.23.2 In two coat

LABOUR
0155 Mason Day 0.30 146.55 43.96
0114 Beldar Day 0.30 135.25 40.57
Sundries L.S 13.39 1.00 13.39
9999
TOTAL 97.92
TOTAL 98.90
Cost of 10.00 sqm 113.74
Say 11.35
13.24 Extra for plastering done on moulding cornices or architraves including neat finish
to line and level:
13.24.1 In one coat

LABOUR
0155 Mason Day 3.00 146.55 439.65
0114 Beldar Day 2.00 135.25 270.50
0115 Coolie Day 1.00 135.25 135.25
0101 Bhisti Day 0.25 138.45 34.61
9999 Sundries L.S 13.39 1.00 13.39
TOTAL 893.40
TOTAL 902.33
Cost of 10.00 sqm 1,037.68
Cost of 1.00 sqm 103.77
Say 103.75
13.24 Extra for plastering done on moulding cornices or architraves including neat finish
to line and level:
13.24.2 In two coats

LABOUR
0155 Mason Day 5.00 146.55 732.75
0114 Beldar Day 3.00 135.25 405.75
0115 Coolie Day 2.00 135.25 270.50
0101 Bhisti Day 0.33 138.45 45.69
9999 Sundries L.S 13.39 1.00 13.39
TOTAL 1,468.08
TOTAL 1,482.76
Cost of 10.00 sqm 1,705.17
Cost of 1.00 sqm 170.52
Say 170.50
601
13.25 Extra for plastering

13.25.1 Spherical ceiling

LABOUR
0155 Mason Day 0.75 146.55 109.91
0114 Beldar Day 0.74 135.25 100.08
9999 Sundries L.S 26.91 1.00 26.91
TOTAL 236.90
TOTAL 239.27
Cost of 10.00 sqm 275.16
Say 27.50

13.25.2 Groined ceiling

LABOUR
0155 Mason Day 0.80 146.55 117.24
0114 Beldar Day 0.80 135.25 108.20
9999 Sundries L.S 34.06 1.00 34.06
TOTAL 259.50
TOTAL 262.10
Cost of 10.00 sqm 301.42
Say 30.15

13.25.3 Flewing ceiling

LABOUR
0155 Mason Day 0.50 146.55 73.28
0114 Beldar Day 0.50 135.25 67.62
9999 Sundries L.S 13.39 1.00 13.39
TOTAL 154.29
TOTAL 155.83
Cost of 10.00 sqm 179.20
Say 17.90
602
13.26 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface
to prepare the surface even and smooth complete

MATERIALS
Plaster of paris 10x0.002x1121 = 22.42kg
Add 20% wastage= 0.45kg
Total = 22.45kg
Say23kg
0869 Plaster of Paris kilogram 23.00 2.50 57.50
9999 Carriage of plaster of paris L.S 1.50 2.60 3.90
LABOUR
0122 Mason special Day 0.91 151.50 137.86
0144 Beldar Day 0.91 135.25 123.08
TOTAL 406.32
TOTAL 410.38
Cost of 10.00 sqm 471.94
Say 47.20
13.27 Extra for lining out plaster to imitate stone or concrete blocks walling

LABOUR
0155 Mason Day 0.50 146.55 73.28
0114 Beldar Day 0.50 135.25 67.62
9999 Solution of lime putty L.S 1.82 1.00 1.82
TOTAL 142.72
TOTAL 144.15
Cost of 10.00 sqm 165.77
Say 16.60
13.28 12 mm thick plain cement mortar bands in cement mortar 1:4 (1 cement: 4 fine sand):
13.28.1 Flush Band
Detail of cost for 10 metre long and 10 cm

wide band
MATERIALS
LABOUR
0155 Mason Day 0.27 146.55 39.57
603
0115 Coolie Day 0.27 135.25 36.52

0101 Bhisti Day 0.05 138.45 6.92
9999 Sundries L.S 1.43 1.00 1.43
TOTAL 116.34
TOTAL 117.50
Cost of 10.00 metre long and 10 cm wide band 135.12
Say 1.35
13.28.2 Sunk Band

wide band
MATERIALS
LABOUR
0155 Mason Day 0.30 146.55 43.96
0115 Coolie Day 0.30 135.25 40.57
0101 Bhisti Day 0.05 138.45 6.92
9999 Sundries L.S 2.08 1.00 2.08
TOTAL 125.43
TOTAL 126.68
Say 1.45
13.28.3 Raised Band

wide band
MATERIALS
LABOUR
0155 Mason Day 0.35 146.55 51.29
0115 Coolie Day 0.35 135.25 47.34
0101 Bhisti Day 0.05 138.45 6.92
9999 Sundries L.S 2.73 1.00 2.73
604
TOTAL 140.18
TOTAL 141.58
Say 1.65
13.28.4 Moulded Band

wide band
MATERIALS
(Rate as per item No 3.4)
LABOUR cum 0.014 2,278.85 31.90
0155 Mason Day 0.65 146.55 95.26
O115 Coolie Day 0.65 135.25 87.91
0101 Bhisti Day 0.05 138.45 6.92
9999 Sundries L.S. 1.56 1.00 1.56
TOTAL 223.55
TOTAL 225.79
Add15% for contractor’s profit and overheads 33.87
Say 2.60
13.29.1 Flush Band

wide band
MATERIALS
LABOUR
0155 Mason Day 0.32 146.55 46.90
0115 Coolie Day 0.32 135.25 43.28
0101 Bhisti Day 0.06 138.45 8.31
9999 Sundries L.S 2.08 1.00 2.08
TOTAL 146.15
TOTAL 147.61
Say 1.70
605
13.29.2 Sunk Band

wide band
MATERIALS
(rate as per item no. 3.4)
LABOUR
0155 Mason Day 0.36 146.55 52.76
0115 Coolie Day 0.36 135.25 48.69
0101 Bhisti Day 0.06 138.45 8.31
9999 Sundries L.S 2.73 1.00 2.73
TOTAL 158.07
TOTAL 159.65
Say 1.85
13.29.3 Raised Band

wide band
MATERIALS
LABOUR
0155 Mason Day 0.42 146.55 61.55
0115 Coolie Day 0.42 135.25 56.80
0101 Bhisti Day 0.06 138.45 8.31
9999 Sundries L.S 4.42 1.00 4.42
TOTAL 176.66
TOTAL 178.43
Say 2.05
13.29.4 Moulded Band

wide band
MATERIALS
LABOUR
606
0155 Mason Day 0.86 146.55 126.03

0115 Coolie Day 0.86 135.25 116.32
0101 Bhisti Day 0.05 138.45 6.92
9999 Sundries L.S 2.73 1.00 2.73
TOTAL 306.69
TOTAL 309.76
Say 3.55
13.30 18 mm thick moulded cement mortar band in two coats under layer 12mm thick with
cement mortar 1:5 (1cement: 5 coarse sand) top layer 6mm thick with cement mortar
1:4 (1 cement: 4 fine sand). .
Detail of cost for 10 metre long and 10 cm wide band

MATERIALS
Cement mortar 1:5 (1 cement: 5 coarse sand). cum 0.014 2,260.15 31.64
(rate as per item no. 3.10) 0.01 2278.85 22.79
Cement morter 1:4 ( 1 cement: 4 fine sand). cum
LABOUR
0155 Mason Day 0.86 146.55 126.03
0115 Coolie Day 0.86 135.25 116.32
0101 Bhisti Day 0.05 138.45 6.92
9999 Sundries L.S 2.73 2. 1.00 2.73
TOTAL 306.43
TOTAL. 309.49
Cost of 1 metre long and 10 cm wide band 355.91
Say 3.55
13.31 Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement: 3 fine
sand):
13.31.1 Flush / Ruled/ Struck or weathered pointing.

MATERIALS
LABOUR
0155 Mason Day 0.50 146.55 73.28
0115 Coolie Day 0.60 135.25 81.15
0101 Bhisti Day 0.93 138.45 128.76
9999 Sundries L.S 7.15 1.00 7.15
9999 Scaffolding and racking out joints including L.S 14.30 1.00 14.30
sundries 2.
TOTAL 390.74
607

TOTAL. 394.65
Cost of 10 sqm. 453.85
Cost of 1.00 sqm. 45.39
Say 45.40
13.31 Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement: 3 fine
sand):
13.31.2 Raised and cut pointing.

MATERIALS
LABOUR
0155 Mason Day 1.07 146.55 156.81
0115 Coolie Day 1.31 135.25 177.18
0101 Bhisti Day 1.00 138.45 138.45
9999 Sundries L.S 7.15 1.00 7.15
sundries 2.
TOTAL 627.73
TOTAL. 634.01
Cost of 1.00 sqm. 72.91
Say 72.90
13.32 Pointing on tile brick work with cement mortar 1:3 (1 cement :3 fine sand):
13.32.1 Flush/Ruled/Struck or weathered pointing

MATERIALS
9999 Sundries cum 7.15 1.00 7.15
LABOUR
0155 Mason Day 0.67 146.55 98.19
0115 Coolie Day 0.80 135.25 108.20
0101 Bhisti Day 1.28 138.45 177.22
sundries 2.
TOTAL 538.90
TOTAL. 544.29
Say 62.60
608
13.33 Pointing on stone work with cement mortar 1:3 (1 cement :3 fine sand):
13.33.1 Flush/Ruled pointing

MATERIALS
9999 Sundries L.S 7.15 1.00 7.15
LABOUR
0155 Mason Day 0.92 146.55 134.83
0115 Coolie Day 1.37 135.25 185.29
0101 Bhisti Day 0.93 138.45 128.76
sundries 2.
TOTAL 538.16
TOTAL. 543.54
Cost of 1.00 sqm. 62.51
Say 62.50
13.33 Pointing on stone work with cement mortar 1:3 (1 cement :3 fine sand):
13.33.2 Raised and cut pointing

MATERIALS
9999 Sundries L.S 7.15 1.00 7.15
LABOUR
0155 Mason Day 2.00 146.55 293.10
0115 Coolie Day 2.96 135.25 400.34
0101 Bhisti Day 1.00 138.45 138.45
sundries 2.
TOTAL 964.22
TOTAL. 973.86
Cost of 10 sqm. 1,119.94
Cost of 1.00 sqm. 111.99
Say 112.00
13.34 Raised and cut pointing on stone work in white cement mortar 1:3 ( 1 white cement : 3
marble dust)

MATERIALS
White Cement mortar 1:3 (1 white cement : 3 cum 0.038 6,035.60 229.35
marble dust. (rate as per item no. 3.16)
9999 Sundries L.S 7.15 1.00 7.15
LABOUR
2.
609
0155 Mason Day 2.00 146.55 293.10

0115 Coolie Day 2.96 135.25 400.34
0101 Bhisti Day 1.00 138.45 138.45
sundries
TOTAL 1084.51
TOTAL. 1095.36
Cost of 10 sqm. 1259.66
Cost of 1.00 sqm. 125.97
Say 125.95
13.35 Pointing on stone slab ceiling with cement mortar 1:2 ( 1 cement : 2 fine dust)
13.35.1 Flush/Ruled pointed

MATERIALS
Cement mortar 1:2 (1 cement : 2 fine sand) cum 0.015 3,598.25 53.97
LABOUR
0155 Mason Day 0.47 146.55 68.88
0115 Coolie Day 0.69 135.25 93.32
0101 Bhisti Day 0.59 138.45 81.69
sundries
TOTAL 313.98
TOTAL. 317.12
Cost of 10 sqm 364.69
Say 36.45
13.36 Extra for pointing on walls on the outside at height more than 10 m from ground
level for every additional height of 3 m or part thereof.

LABOUR
9999 Scaffolding L.S 13.39 1.00 13.39
9999 sundries L.S 13.39 1.00 13.39
TOTAL 26.78
TOTAL. 27.05
Say 3.10
610
13.37 White washing with lime to give an even shade: —

13.37.1 New work (three or more coats)

MATERIALS
0775 Dehradun white lime quintal 0.03 295.00 8.85
LABOUR
0141 White Washer Day 0.20 138.45 27.69
0115 Coolie Day 0.10 135.25 13.52
9999 Indigo gum etc L.S 4.42 1.00 4.42
9999 Sundries ladders etc L.S 2.73 1.00 2.73
TOTAL 58.12
TOTAL 58.70
Say 6.75
13.38 Satna lime wash on wallls one coat


MATERIALS
0776 Satna lime quintal 0.01 178.00 1.78
9999 Indigo gum etc L.S 0.52 1.00 0.52
LABOUR
0141 White Washer Day 0.08 138.45 11.08
0115 Coolie Day 0.04 135.25 5.41
TOTAL 23.60
TOTAL 23.84
Say 2.75
13.39 Colour washing such as green, blue or buff to give an even shade : ,—
13.39.1 New work (two or more coats) with a base coat of white washing with lime

MATERIALS
9999 Add for colouring stuff L.S 0.91 1.00 0.91
LABOUR
0141 White Washer Day 0.30 138.45 41.54
0115 Coolie Day 0.10 135.25 13.52
9999 Indigo gum etc L.S 1.70 1.00 4.42
611
TOTAL 80.03
TOTAL 80.83
Say 9.30
13.39 Colour washing such as green, blue or buff to give an even shade : ,—
13.39.2 New work (two or more coats) with a base coat of whiting

MATERIALS
9999 Add for colouring stuff L.S 0.91 1.00 0.91
LABOUR
0141 White Washer Day 0.30 138.45 41.54
0115 Coolie Day 0.10 135.25 13.52
9999 Indigo gum etc L.S 2.73 1.00 2.73
TOTAL 78.34
TOTAL 79.12
Say 9.10
13.40 Distempering with dry distemper of approved brand and manufacture (two or more
coats) and of required shade on new work, over and including priming coat of whiting
to give an even shade:-
MATERIALS
1216 Whiting quintal 0.01 329.00 3.29
9999 Putty, glue etc L.S 2.73 1.00 2.73
For distempering
0815 Dry distemper kilogram 1.50 26.00 39.00
9999 Carriage of material L.S 1.56 1.00 1.56
9999 Brushes, sand paper etc L.S 7.15 1.00 7.15
LABOUR
0131 Painter Day 0.80 141.60 113.28
0115 Coolie Day 0.40 135.25 54.10
9999 Sundries L.S 5.38 1.00 5.33
TOTAL 226.44
TOTAL^ 228.70
Add 15% or contractor’s profit and overheads 34.30
Cost of 10.00 sqm 263.00
Say 26.30
612
13.41 Distempering with oil bound washable distemper of approved brand and
manufacture to give an even shade
13.41.1 New work (two or more coats) over and including priming coat with cement primer:-

MATERIALS
0820 Cement primer litre 0.70 70.00 49.00
9999 Brushes, putty etc L.S. 7.15 1.00 7.15
9999 Sundries including Carriage L.S. 8.06 1.00 8.06
9999 Carriage of material L.S. 4.42 1.00 4.42
9999 Brushes, sand paper and putty for filling holes L.S. 11.70 1.00 11.70
LABOUR
0131 Painter Day 1.00 141.60 141.60
0115 Coolie Day 0.50 135.25 67.62
9999 Sundries L.S. 8.06 1.00 8.06
TOTAL 357.61
TOTAL 361.19
Cost of 10.00 sqm 415.37
Say 41.55
13.42 Distempering with 1st quality acrylic washable distemper (ready made) of approved
manufacturer and of required shade and colour complete, as per manufacturer’s
specification. .
13.42.1 Two or more coats on new work.

MATERIALS
0820 Oil bound washable distemper kilogram 1.50 40.00 60.00
9999 Brushes, sand paper and putty for filling holes L.S. 11.57 1.00 11.57
LABOUR
0131 Painter Day 0.40 141.60 56.64
0114 Beldar Day 0.46 135.25 62.22
9999 Sundries L.S. 8.06 1.00 8.06
TOTAL 202.91
TOTAL 204.94
Cost of 10.00 sqm 235.68
Say 23.55
613
13.43 Applying one coat of cement primer of approved brand and manufacture on wall
surface
13.43.1 Cement primer

MATERIALS
0820 Cement primer quintal 0.70 70.00 49.00
9999 Brushes, putty etc L.S 7.15 1.00 7.15
LABOUR
0131 Painter Day 0.40 141.60 56.64
0115 Coolie Day 0.20 135.25 27.05
9999 Sundries including carriage L.S 8.06 1.00 8.06
TOTAL 147.90
TOTAL 149.38
Cost of 10.00 sqm 171.79
Say 17.20
13.44 Finishing walls with water proofing cement paint of required shade
13.44.1 New work (Two or more coats applied @ 3.84 kg/10 sqm).

MATERIALS
0851 Water proofing cement paint kilogram 3.84 36.00 138.24
LABOUR
0131 Painter Day 0.46 141.60 65.14
0115 Coolie Day 0.23 135.25 31.11
0101 Bhisti Day 0.10 138.45 13.84
9999 Sundries L.S 8.06 1.00 8.06
TOTAL 265.10
TOTAL 267.75
Cost of 10.00 sqm 307.91
Say 30.80
13.45 Finishing walls with textured exterior paint of required shade :

13.45.1 New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including base
coat of water proofing cement paint applied @ 2.20kg/10 sqm.

MATERIALS
8507 Textured exterior paint litre 3.28 183.00 600.24
LABOUR
614
0131 Painter Day 0.60 141.60 84.96

0115 Coolie Day 0.30 135.25 40.57
0101 Bhisti Day 0.05 138.45 6.92
Brushes, sand paper etc L.S 7.02 1.00 7.02
Sundries L.S 8.06 1.00 8.06
TOTAL 828.53
TOTAL 836.82
Cost of 10.00 sqm 962.34
Say 96.25
13.46 Finishing walls with Acrylic Smooth exterior paint of required shade : —
13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base
coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm).

MATERIALS
8505 Acrylic exterior paint litre 1.67 123.00 205.41
LABOUR
0131 Painter Day 0.06 141.60 84.96
0115 Coolie Day 0.30 135.25 40.57
0101 Bhisti Day 0.05 138.45 6.92
9999 Sundries L.S 8.06 1.00 8.06
TOTAL 433.83
TOTAL 438.17
Cost of 10.00 sqm 503.90
Say 50.40
13.47 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives
of required shade —
13.47.1 New work (Two or more coats applied @ 1.43 ltr/ 10 sqm. over and including base
coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm).

MATERIALS
8506 Premium Acrylic exterior paint litre 1.43 202.00 288.86
LABOUR
0131 Painter Day 0.06 141.60 84.96
0115 Coolie Day 0.30 135.25 40.57
615
0101 Bhisti Day 0.05 138.45 6.92

9999 Sundries L.S 8.06 1.00 8.06
TOTAL 517.28
TOTAL 522.45
Cost of 10.00 sqm 600.82
Say 60.10
13.48 Finishing walls with Deluxe Multi surface paint system for interiors and exteriors
using Primer as permanufacturers specifications :
13.48.1 Two or more coats applied @ 1.25 ltr/10 sqm. over and including one coat of Special
primer applied @0.75 ltr/10 sqm.

MATERIALS
8504 Multi surface paint litre 1.25 264.00 330.00
8509 Special Primer litre 0.75 76.00 57.00
LABOUR
0131 Painter Day 0.60 141.60 84.96
0115 Coolie Day 0.30 135.25 40.57
0101 Bhisti Day 0.05 138.45 6.92
9999 Sundries L.S 8.06 1.00 8.06
TOTAL 536.09
TOTAL 541.45
Cost of 10.00 sqm 622.67
Say 62.25
using Primer as per manufacturers specifications :
13.48.2 Painting wood work with Deluxe Multi Surface Paint of required shade. Two or
more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/
10 sqm of approved brand or manufacture

MATERIALS
8509 Special Primer litre 0.75 76.00 57.00
LABOUR
0131 Painter Day 0.60 141.60 84.96
0115 Coolie Day 0.30 135.25 40.57
0101 Bhisti Day 0.05 138.45 6.92
616

9999 Sundries L.S 8.06 1.00 8.06
TOTAL 443.69
TOTAL 448.13
Cost of 10.00 sqm 515.35
Say 51.55
using Primer as per manufacturers specifications :
13.48.3 Painting wood work with Deluxe Multi Surface Paint of required shade. Two or
more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.80 ltr/
10 sqm of approved brand or manufacture

MATERIALS
8509 Metal Primer litre 0.80 91.00 72.80
LABOUR
0131 Painter Day 0.60 141.60 84.96
0115 Coolie Day 0.30 135.25 40.57
0101 Bhisti Day 0.05 138.45 6.92
9999 Sundries L.S 8.06 1.00 8.06
TOTAL 459.49
TOTAL 464.08
Cost of 10.00 sqm 533.69
Say 53.35
13.49 Extra for applying water proofing cement paint as primer applied @ 2.2 kg/ 0 sqm
instead of primer for exterior finishing in Item No. 13.48.1

Water proofing material required for 10 sqm =
2.20 kg
Primer required 10 sqm = 0.75 litres
8509 Special Primer litre 0.75 76.00 -57.00
Difference of Cost 22.20
TOTAL 22.42
Cost of 10.00 sqm 25.78
Say 2.60
617
13.50 Applying priming coat:-

13.50.1 With ready mixed pink or Grey primer of approved brand and manufacture on
wood work (hard and soft wood)
MATERIALS
0823 Primer litre 0.75 72.00 54.00
9999 Putty L.S. 1.05 1.00 2.73
9999 Carriage L.S. 0.39 1.00 0.39
LABOUR
0131 Painter Day 0.25 141.60 35.40
0115 Coolie Day 0.25 135.25 33.81
9999 Brushes, sand paper etc L.S. 5.33 1.00 5.33
9999 Sundries L.S. 10.79 1.00 10.79
TOTAL 142.45
TOTAL 143.87
Cost of 10.00 sqm 165.45
Say 16.55
13.50 Applying priming coat:-

13.50.2 With ready mixed aluminium primer of approved brand and manufacture or
resinous wood and plywood.
MATERIALS
4201 Aluminium primer litre 0.75 63.00 47.25
9999 Putty L.S. 2.73 1.00 2.73
9999 Carriage L.S. 0.39 1.00 0.39
LABOUR
0131 Painter Day 0.25 141.60 35.40
0115 Coolie Day 0.25 135.25 33.81
9999 Sundries L.S. 10.79 1.00 10.79
TOTAL 135.70
TOTAL 137.06
Cost of 10.00 sqm 157.62
Say 15.75
13.50 Applying priming coat:

13.50.3 With ready mixed red oxide zinc chromate primer of approved brand and
manufacture on steel galvanised iron/steel works:-
MATERIALS
4202 Red oxide Zinc chromate yellow primer litre 0.54 58.00 31.32
9999 Carriage L.S. 0.52 1.00 0.52
LABOUR
0131 Painter Day 0.24 141.60 33.98
618
0115 Coolie Day 0.24 135.25 32.46

9999 Brushes,sand paper including sundries L.S. 10.79 1.00 10.79
TOTAL 109.07
TOTAL 110.16
Cost of 10.00 sqm 126.68
Say 12.65
13.50 Applying priming coat:

13.50.4 With ready mixed red oxide zinc chromate primer of approved brand and
manufacture on steel work (second coat)
MATERIALS
9999 Carriage L.S. 0.39 1.00 0.39
LABOUR
0131 Painter Day 0.12 141.60 16.99
0115 Coolie Day 0.12 135.25 16.23
9999 Brushes,sand paper including L.S. 7.15 1.00 7.15
TOTAL 61.64
TOTAL 62.26
Cost of 10.00 sqm 71.60
Say 7.15
13.51 Painting one thin coat with white lead of approved brand and manufacture on wet
or patchy portion of plastered surfaces
MATERIALS
0850 White lead kilogram 0.86 60.00 51.60
0818 Linseed oil (double boiled) litre 0.61 80.00 48.80
9999 Putty etc L.S 2.73 1.00 2.73
LABOUR
0131 Painter Day 0.27 141.60 38.23
0115 Coolie Day 0.27 135.25 36.52
9999 Sundries L.S 10.79 1.00 10.79
TOTAL 194.52
TOTAL 196.47
Cost of 10.00 sqm 225.94
Say 22.60
619
13.52 Finishing with Epoxy paint (two or more coats) at all locations prepared and
applied as per manufacturer’ specifications including appropriate priming coat,
preparation of surface, etc. complete.
13.52.1 On Steel work

PRIMING COAT
MATERIALS
4202 Primer litre 0.75 58.00 43.50
9999 Putty L.S 2.73 1.00 2.73
9999 Carriage L.S 0.39 1.00 0.39
LABOUR
0131 Painter Day 0.25 141.60 35.40
0115 Coolie Day 0.25 135.25 33.81
9999 Sundries L.S. 10.66 1.00 10.66
EPOXY PAINTING
MATERIALS
7239 Epoxy paint litre 1.25 280.00 350.00
LABOUR
0131 Painter Day 0.54 141.60 76.46
0115 Coolie Day 0.54 135.25 73.04
9999 Putty, brushes, sand paper etc L.S. 6.76 1.00 6.76
9999 Sundries L.S. 8.06 1.00 8.06
TOTAL 647.70
TOTAL 654.18
Cost of 10.00 sqm 752.31
Say 75.25
13.52 Finishing with Epoxy paint (two or more coats) at all locations prepared and applied
as per manufacturer’s specifications including appropriate priming coat,
preparation of surface, etc. complete:-
13.52.2 On concrete work:-
PRIMING COAT
MATERIALS
0821 Primer litre 0.84 73.00 61.32
9999 Putty L.S. 13.52 1.00 13.52
9999 Carriage L.S. 0.52 1.00 0.52
LABOUR
0131 Painter Day 0.25 141.60 35.40
0115 Coolie Day 0.25 135.25 33.81
9999 Sundries L.S 8.06 1.00 8.06
EPOXY PAINTING
MATERIALS
7239 Epoxy paint litre 1.21 280.00 338.80
9999 Materials for filling in holes and cracks (putty L.S. 2.60 1.00 6.76
etc)
LABOUR
0131 Painter Day 0.54 141.60 76.46
620
0115 Coolie Day 0.54 135.25 73.04
9999 Putty, brushes, sand paper etc L.S 10.79 1.00 10.79
9999 Sundries L.S. 6.76 1.00 6.76
TOTAL 669.40
TOTAL 676.09
Cost of 10.00 sqm 777.50
Say 77.75
13.53 Painting on G.S. sheet with synthetic enamel paint of approved brand and
manufacture of required colour to give an even shade : -
13.53.1 New work (two or more coats) including a coat of approved steel primer but
excluding a coat of mordant solution.

PRIMING COAT
MATERIALS
4202 Steel primer litre 0.36 58.00 20.88
9999 Carriage L.S. 0.15 1.00 0.39
LABOUR
0131 Painter Day 0.12 141.60 16.99
0114 Beldar Day 0.12 135.25 16.23
EPOXY PAINTING
MATERIALS
0834 Synthetic enamel paint litre 0.80 120.00 96.00
9999 Carriage L.S. 1.43 1.00 1.43
LABOUR
0131 Painter Day 0.54 141.60 76.46
0115 Coolie Day 0.54 135.25 73.04
9999 Sundries L.S 8.06 1.00 8.06
TOTAL 323.39
TOTAL 326.62
Cost of 10.00 sqm 375.61
Say 37.55
13.54 Applying a coat of mordant solution on G.S. sheet

13.54.1 With a solution of 38 gms of copper acetate in a litre of soft water
MATERIALS
4203 Copper acetate kilogram 0.38 228.00 8.66
9999 Soft Water L.S. 0.70 1.00 1.82
9999 Carriage L.S 0.91 1.00 0.91
LABOUR
0131 Painter Day 0.60 141.60 84.96
0115 Coolie Day 0.60 135.25 81.15
9999 Sundries L.S 35.88 1.00 35.88
621
TOTAL 249.26
TOTAL 251.75
Say 11.60
13.54 Applying a coat of mordant solution on G.S. sheet

13.54.2 With a solution made of 13 gms of hydrochloric acid in a solution of 13 gms each
of copper chloride,. copper nitrate and ammonium chloride dissolved in a litre of
soft water.
MATERIALS
4204 Hydrochloric acid kilogram 0.013 27.00 0.35
4205 Copper chloride kilogram 0.013 244.00 3.17
4206 Copper nitrate kilogram 0.013 173.00 2.25
4207 Ammonium chloride kilogram 0.013 12.00 0.16
9999 Soft Water L.S. 1.82 1.00 1.82
9999 Carriage L.S. 0.91 1.00 0.91
LABOUR
0131 Painter Day 0.60 141.60 84.96
0115 Coolie Day 0.60 135.25 81.15
9999 Sundries L.S 35.88 1.00 35.88
TOTAL 246.53
TOTAL 249.00
Say 11.45
13.55 Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings
with black anticorrosive bitumastic paint approved brand and manufacture over
and including a priming coat of readymixed zinc chromate yellow primer on
new work : -—
13.55.1 100 mm diameter pipes
Detail of cost for 30 mtrs
Area=22/7x106.4mm x30m=10.032sqm
MATERIALS
4202 Zinc chromate red oxide primer litre 0.54 58.00 31.32
9999 Carriage L.S. 0.52 1.00 0.52
LABOUR
0131 Painter Day 0.24 141.60 33.98
0115 Coolie Day 0.24 135.25 32.46
MATERIALS
0828 Anticorrosive bituminous paint (black) litre 0.95 52.00 49.40
9999 Carriage L.S. 1.43 1.00 1.43
LABOUR
0131 Painter Day 0.54 141.60 76.46
622
0115 Coolie Day 0.54 135.25 73.04
9999 Putty, sand paper etc L.S 5.33 1.00 .5.33
9999 Sundries L.S 8.06 1.00 8.06
9999 Wire brushes for cleaning L.S 5.33 1.00 5.33
9999 Extra for delays L .S 61.10 1.00 61.10
TOTAL 389.22
TOTAL 393.11
Cost of 30.00 mtrs 452.08
Cost of 1.00 metre 15.07
Say 15.05
with black anticorrosive bitumastic paint approved brand and manufacture over
and including a priming of ready mixed zinc chromate yellow primer on new work

Area=22/7 x 0.15720 x 30 m = 14.82 sqm.
MATERIALS
LABOUR
0131 Painter Day 0.36 141.60 50.98
0115 Coolie Day 0.36 135.25 48.69
9999 Carriage L.S 0.91 1.00 0.91
MATERIALS
9999 Carriage L.S 2.08 1.00 2.08
LABOUR
0131 Painter Day 0.80 141.60 113.28
0115 Coolie Day 0.80 135.25 108.20
9999 Putty, sand paper etc L.S 8.06 1.00 8.06
9999 Sundries L.S 11.96 1.00 11.96
9999 Extra for delays L.S 94.12 1.00 94.12
TOTAL 581.14
TOTAL 586.95
Say 22.50
with synthetic enamel paint of approved brand and manufacture and required colour
over a priming coat of approved steel primer on new work.
Detail of cost for_30 mtrs

Area=22/7 x 106.40/1000 x 30 m = 10.032
MATERIALS
623
4202 Red oxide Zinc chromate primer litre 0.54 58.00 31.32
9999 Carriage L.S 0.52 1.00 0.52
LABOUR
0131 Painter Day 0.24 141.60 33.98
0115 Coolie Day 0.24 135.25 32.46
9999 Sundries L.S 10.79 1.00 10.79
MATERIALS
0826 Aluminium paint litre 0.80 89.00 71.20
9999 Carriage L.S 0.55 1.00 1.43
9999 Putty, sand paper etc. L.S 5.33 1.00 5.33
LABOUR
0131 Painter Day 0.54 141.60 76.46
0115 Coolie Day 0.54 135.25 73.04
9999 Sundries L.S 6.76 1.00 6.76
TOTAL 421.68
TOTAL 425.90
Say 16.35
with synthetic enamel paint of approved brand and manufacture and required colour
over a priming coat of approved steel primer on new work.

Area=22/7 xl57.2mm x30m =14.82sqm
MATERIALS
9999 Carriage L.S 0.65 1.00 0.65
LABOUR
0131 Painter Day 0.36 141.60 50.98
0115 Coolie Day 0.36 135.25 48.69
9999 Sundries L.S 15.99 1.00 15.99
MATERIALS
9999 Carriage L.S 2.08 1.00 2.08
9999 Putty, sand paper etc L.S 7.93 1.00 7.93
LABOUR
0131 Painter Day 0.80 141.60 113.28
0115 Coolie Day 0.80 135.25 108.20
9999 Sundries L.S 10.01 1.00 10.01
TOTAL 629.33
TOTAL 635.62
15% for contractor’s profit and overheads 95.34
Say 24.35
624
13.57 Painting with oil type wood preservative of approved brand and manufacture:
13.57.1 New work (Two or more coats )

MATERIALS
0859 Oil type wood preservative litre 1.00 6.00 60.00
LABOUR
0131 Painter Day 0.15 141.60 21.24
0115 Coolie Day 0.15 135.25 20.29
9999 Brushes etc L.S 4.16 1.00 4.16
9999 Sundries L.S 3.90 1.00 3.90
TOTAL 110.11
TOTAL 111.21
Cost of 10.00 sqm 127.89
Say 12.80
13.58 Providing and applying two coats of fire retardant paint unthinned on cleaned wood/
ply surface @ 3.5 sqm per litre per coat including preparation of base surface as per
recommendations of manufacturer to make the surface fire retardant.

MATERIALS
7240 Fire retardant paint litre 5.70 318.00 1,812.60
LABOUR
0131 Painter Day 0.54 141.60 76.46
0114 Beldar Day 0.54 135.25 73.04
9999 Sundries L.S 8.06 1.00 8.06
TOTAL 1,978.35
TOTAL 1,998.13
Cost of 10.00 sqm 2,297.85
Cost of 1.00 sqm 229.79
Say 229.80
13.59 Coal tarring two coats on new work using 0.16 and 0.12 litre coal tar per sqm in the
first coat and second coat respectively.

MATERIALS
9999 Lime L.S 1.43 1.00 1.43
0324 Coal Tar litre 2.80 16.00 44.80
0771 Kerosene oil litre 0.50 19.00 9.50
625
LABOUR
0114 Beldar Day 0.43 135.25 58.16
9999 Brushes etc Day 5.33 1.00 5.33
9999 Sundries L.S 5.33 1.00 5.33
TOTAL 125.98
TOTAL 127.24
Cost of 10.00 sqm 146.33
Say 14.65
13.60 Wall painting with plastic emulsion paint of approved brand and manufacture to
give an even shade
13.60.1 Two or more coats on new work-

MATERIALS
0835 Plastic emulsion paint litre 1.21 140.00 169.40
9999 Materials for filling in holes and cracks (putty L.S 6.76 1.00 6.76
etc)
LABOUR
0131 Painter Day 0.54 141.60 76.46
0115 Coolie Day 0.54 135.25 73.04
9999 Sundries L.S 6.76 1.00 6.76
TOTAL 344.64
TOTAL 348.09
Cost of 10.00 sqm 400.30
Say 40.05
13.61 Painting with synthetic enamel paint of approved brand and manufacture to give an
even shade:
13.61.1 Two or more coats on new work

MATERIALS
9999 Materials for filling in holes and cracks (putty L.S 5.33 1.00 5.33
etc)
9999 Carriage L.S 1.43 1.00 1.43
LABOUR
0131 Painter Day 0.54 141.60 76.46
0115 Coolie Day 0.54 135.25 73.04
9999 Sundries L.S 8.06 1.00 8.06
626
TOTAL 304.48
TOTAL 307.52
Cost of 10.00 sqm 353.65
Say 33.35
13.62 Painting with synthetic enamel paint of approved brand and manufacture of required
colour to give an even shade:
13.62.1 Two or more coats on new work over an under coat of suitable shade with ordinary
paint of approved brand and manufacture.

MATERIALS
0823 Primer litre 0.75 72.00 54.00
9999 Putty L.S 2.73 1.00 2.73
9999 Carriage L.S 0.39 1.00 0.39
LABOUR
0131 Painter Day 0.25 141.60 35.40
0115 Coolie Day 0.25 135.25 33.81
9999 Sundries L.S 10.79 1.00 10.79
MATERIALS
0833 Enamel paint litre 1.16 115.00 133.40
9999 Carriage of paint and material L.S 0.55 1.00 1.43
LABOUR
0131 Painter Day 0.54 141.60 76.46
0115 Coolie Day 0.54 135.25 73.04
9999 Sundries L.S 8.06 1.00 8.06
TOTAL 441.60
TOTAL 446.02
Cost of 10.00 sqm 512.92
Say 51.30
13.63 Painting with aluminium enamel paint of approved brand and manufacture to give
an even shade:

MATERIALS
9999 Carriage of paint and material L.S 1.43 1.00 1.43
9999 Putty etc L.S 2.05 1.00 5.33
LABOUR
627
0131 Painter Day 0.54 141.60 76.46

0115 Coolie Day 0.54 135.25 73.04
9999 Sundries L.S 11.96 1.00 11.96
TOTAL 246.18
TOTAL 248.64
Add-15% for contractor’s profit and overheads 37.30
Cost of 10.00 sqm 285.94
Say 28.60
13.64 Painting with acid proof paint of approved brand and manufacture to give an even
shade:

MATERIALS
0827 Acid proof paint litre 1.16 93.00 107.88
9999 Carriage of paint L.S 1.43 1.00 1.43
9999 Putty etc L.S 5.33 1.00 5.33
LABOUR
0131 Painter Day 0.54 141.60 76.46
0115 Coolie Day 0.54 135.25 73.04
9999 Sundries L.S 8.06 1.00 8.06
TOTAL 278.96
TOTAL 281.75
Cost of 10.00 sqm 324.01
Say 32.40
13.65 Painting with black anti-corrosive bitumastic paint of approved brand and
manufacture to give an even shade:
MATERIALS
0828 Black anticorrosive bitumastic paint litre 0.95 52.00 49.40
9999 Carriage L.S 0.55 1.00 1.43
LABOUR
0131 Painter Day 0.54 141.60 76.46
0115 Coolie Day 0.54 135.20 73.04
9999 Sundries L.S 8.06 1.00 8.06
TOTAL 213.72
TOTAL 215.86
Cost of 10.00 sqm 248.24
Say 24.80
628
13.66 Floor Painting with floor enamel paint of approved brand and manufacture to give
an even shade:

MATERIALS
0831 Floor enamel paint in all shades litre 1.48 100.00 148.00
9999 Carriage L.S 1.43 1.00 1.43
9999 Putty etc L.S 5.33 1.00 5.33
LABOUR
0131 Painter Day 0.54 141.60 76.46
0115 Coolie Day 0.54 135.25 73.04
9999 Sundries L.S 8.06 1.00 8.06
TOTAL 319.08
TOTAL 322.27
Cost of 10.00 sqm 370.61
Say 37.05
13.67 Varnishing with varnish of approved brand and manufacture:

13.67.1 Two or more coats of glue sizing with copal varnish over an under coat of flatting
varnish.

MATERIALS
0856 Undercoat flatting varnish litre 0.70 49.00 34.30
0763 Glue for sizing kilogram 0.07 50.00 3.50
0857 Copal varnish litre 1.16 100.00 116.00
9999 Carriage L.S 0.55 1.00 1.43
9999 Putty for repair to holes etc L.S 2.05 1.00 5.33
LABOUR
0131 Painter (0.36+0.54=0.90) Day 0.90 141.60 127.44
0115 Coolie (0.36+0.54=0.90) Day 0.90 135.25 121.72
9999 Sundries L.S 2.75 1.00 7.15
TOTAL 423.63
TOTAL 427.87
Cost of 10.00 sqm 492.05
Say 49.20
629
13.67 Varnishing with varnish of approved brand and manufacture:

13.67.2 Two or more coats glue sizing with spar varnish or an under coat of flatting varnish.

MATERIALS
0856 Ordinary varnish litre 0.70 49.00 34.30
0763 Glue kilogram 0.07 50.00 3.50
0858 Superior spar varnish litre 1.26 105.00 132.30
9999 Carriage L.S 1.43 1.00 1.43
9999 Repair etc L.S 2.73 1.00 2.73
LABOUR
0131 Painter (0.36+0.54=0.90) Day 0.90 141.60 127.44
0115 Coolie (0.36+0.54=0.90) Day 0.90 135.25 121.72
9999 Sundries L.S 7.15 1.00 7.15
TOTAL 437.33
TOTAL 441.70
Cost of 10.00 sqm 507.96
Say 50.80
13.68 French spirit polishing:

13.68.1 Two or more coats on new works including a coat of wood filler.

MATERIALS
1000 Spirit litre 1.63 37.00 60.31
9999 Pigment kilogram 7.15 1.00 7.15
0999 Shellac litre 0.24 192.00 46.08
9999 White woolen cloth, putty L.S 16.12 1.00 16.12
9999 Sand paper cotton etc L.S 13.39 1.00 13.39
9999 Lineseed oil L.S 1.43 1.00 1.43
LABOUR
0131 Painter Day 3.50 141.60 495.60
9999 Sundries L.S 8.06 1.00 8.06
TOTAL 650.87
TOTAL 657.38
Cost of 10.00 sqm 755.99
Say 75.60
13.69 Polishing on wood work with ready made wax polish of approved brand and
manufacture :
13.69.1 New work
MATERIALS
630

0855 Ready made Wax polish kilogram 0.50 150.00 75.00
9999 Carriage L.S 0.39 1.00 0.39
LABOUR
0131 Painter Day 0.80 141.60 113.28
0115 Coolie Day 0.80 135.25 108.20
9999 Soap, brushes, cloth etc L.S 4.16 1.00 4.16
9999 Sundries L.S 7.15 1.00 7.15
TOTAL 308.18
TOTAL 311.26
Cost of 10.00 sqm 357.95
Say 35.80
13.70 Floor polishing on masonry or concrete floors with wax polish of approved brand
and manufacture.

MATERIALS
0855 Wax polish kilogram 0.10 150.00 15.00
LABOUR
0131 Painter Day 0.40 141.60 56.64
0115 Coolie Day 0.40 135.25 54.10
9999 Acetic acid soap, cloth etc L.S 5.33 1.00 5.33
9999 Sundries including Carriage L.S 8.06 1.00 8.06
TOTAL 139.13
TOTAL 140.52
Cost of 10.00 sqm 161.60
Say 16.15
13.71 Lettering with black Japan paint of approved brand and manufacture
Detail of cost for 100 letters of 15 cm height

MATERIALS
0829 Paint litre 0.56 65.00 36.40
9999 Carriage L.S 0.91 1.00 0.91
LABOUR
0131 Painter Day 6.00 141.60 849.60
0115 Coolie Day 2.00 135.25 270.50
9999 Painting brushes, turpentine, stencil etc L.S 13.39 1.00 13.39
9999 Sundries L.S 8.06 1.00 8.06
TOTAL 1.178.86
TOTAL 1.190.65
Cost of 100 letters of 15 cm height 1.369.25
Cost of 1 letters of 1 cm height 0.91
Say 0.90
631
13.72 Washed stone grit plaster on exterior walls of height upto 10 M. above ground level in
two layers, under layer 12mm cement plaster 1:4 (1 cement : 4 coarse sand ) furrowing
the under layer with scratching tool, applying cement slurry on the under layer @ 2
Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2
coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around
as per approved pattern including scrubbing and washing, the top layer with brushes
and water to expose the stone chippings ,complete as per specification and direction
of Engineer-in- charge (Payment for providing grooves shall be made separately).

MATERIALS
3.9 Under layer 12 mm cement plaster with cum 0.144 2,578.45 371.30
LABOUR
0155 Mason Day 0.67 146.55 98.19
0114 Beldar Day 0.75 135.25 101.44
0101 Bhisti Day 0.92 138.45 127.37
9999 Scaffolding L.S. 8.97 1.00 8.97
Applying cement slurry
0367 Cement tonne 0.02 4,500.00 90.00
2209 Carriage tonne 0.02 47.29 0.95
0114 Beldar Day 0.25 135.25 33.81
Top layer 15 mm thick stone chipping plaster
Quantity required = 0.172 cum including
wastage
Preparation of cement concrete mix 1:1/2:2 (1
cement: 1/2 coarse sand : 2 stone chipping 10
mm nominal size)
2911 Stone chippings 10 mm nominal size cum 0.14 700.00 98.00
2202 Carriage of Stone chipping 10 mm nominal cum 0.14 53.21 7.45
size
0982 Coarse sand cum 0.04 600.00 24.00
2203 Carriage of Coarse sand cum 0.04 53.21 2.13
0367 Cement tonne 0.10 4,500.00 450.00
0114 Beldar Day 0.10 135.25 13.52
0101 Bhisti Day 0.05 138.45 6.92
9999 Hire and running charges of mechanical mixer L.S. 4.29 1.00 4.29
9999 Sundries L.S. 2.08 1.00 2.08
LABOUR
0123 Mason 1 st class Day 1.75 151.50 265.12
0114 Beldar Day 1.75 135.25 236.69
0101 Bhisti Day 0.30 138.45 41.54
9999 Scaffolding L.S. 24.44 1.00 24.44
Labour for washing
0115 Coolie Day 0.50 135.25 67.62
9999 Sundries soft brushes etc L.S. 25.22 1.00 25.22
TOTAL 2,257.28
TOTAL 2,279.85
Cost of 10.00 sqm 2,621.83
Cost of 1.00 sqm 262.18
Say 262.20
632
13.73 Forming groove of uniform size in the top layer of washed stone grit plaster as per
approved pattern using wooden battens, nailed to the under layer including removal
of wooden battens, repair to the edges of panels and finishing the groove complete
as per specifications and direction of the Engineer-in-charge :
13.73.1 15 mm wide and 15 mm deep groove

Second class kail wood in plank 30 x0.015
x0.015m=6.75cudmv-
Wastage@ 10%= 0.68
Total = 7.43 cudm
Assuming that the battens shall become
unserviceable after using 5 times
Cost for using once
MATERIALS
1198 Second class kail wood in planks 10 cum 0.148 178.00 26.34
9999 Carriage of wood L.S. 0.39 1.00 0.39
Labour for making battens
0112 Carpenter 2nd class Day 0.15 141.60 21.24
0114 Beldar Day 0.15 135.25 20.29
9999 Sundries Day 2.86 1.00 2.86
Labour for nailing the battens to under layer
and finishing and repairing grooves
O123 Mason 1 st class 106.05
0114 Beldar Day 0.70 151.50 94.68
9999 Nails and cement mortar Day 0.70 135.25 71.76
TOTAL L.S. 71.76 1.00 343.61
TOTAL 347.05
Say 13.30
13.73 Forming groove of uniform size in the top layer of washed stone grit plaster as per
approved pattern using wooden battens, nailed to the under layer including removal
of wooden battens, repair to the edges of panels and finishing the groove complete
as per specifications and direction of the Engineer-in-charge :
13.73.2 20 mm wide and 15 mm deep groove

Second class kail wood in plank 30 x0.02
x0.015m =9.00 cudm
Wastage® 10%= 0.90
Total = 9.90 cudm
unserviceable after using 5 times
Cost for using once
MATERIALS
9999 Carriage of wood L.S. 0.52 1.00 0.52
633

0114 Beldar Day 0.15 135.25 20.29
9999 Sundries Day 2.86 1.00 2.86
O123 Mason 1st class 106.05
0114 Beldar Day 0.70 151.50 94.68
9999 Nails and cement mortar Day 0.70 135.25 71.76
TOTAL L.S. 71.76 1.00 352.64
TOTAL 356.17
Say 13.65
13.74 Extra for washed grit plaster on exterior walls of height more than 10m from ground
level for every additional height of 3 m or part thereof.

MATERIALS
9999 Scaffolding L.S. 215.28 1.00 215.28
0114 Beldar Day 0.30 135.25 40.57
0101 Bhisti Day 0.15 138.45 20.77
9999 Sundries L.S 28.60 1.00 28.60
TOTAL 350.67
TOTAL 354.18
Cost of 10.00 sqm 407.31
Say 40.75
13.75 Extra for washed stone grit plaster on circular work not exceeding 6m in radius (in
two coats).

LABOUR
0114 Beldar Day 0.50 135.25 67.62
9999 Sundries L.S 53.82 1.00 53.82
TOTAL 197.19
TOTAL 199.16
Cost of 10.00 sqm 229.03
Say 22.90
634
13.76 Forming groove of uniform size from 12xl2mm and upto 25xl5mm in plastered surface
as per approved pattern using wooden battens, nailed to the under layer including
removal of wooden battens, repairs to the edges of plaster panel and finishing the
groove complete as per specifications and direction of the Engineer-in-Charge..

Second class kail wood in plank {30 xO.025
x0.015m =0.01 lcum} + {30 x0.012 x0.012m
=0.004cum} =0.015cum =15.00cudm
Wastage @ 10% = 0.15 cudm
Total = =15.15cudm
Average =15.15/2 =7.57
unserviceable after using 5 times = 7.57
Cost for using once = 1.50 cudm
9999 Carriage of timber L.S. 0.39 1.00 0.39
0114 Beldar Day 0.15 135.25 20.29
9999 Sundries Day 2.86 1.00 2.86
0114 Beldar Day 0.70 135.25 94.68
9999 Nails and cement mortar L.S. 71.86 1.00 71.76
TOTAL 343.97
TOTAL 347.41
Say 13.30
13.77 Extra for using white cement in place of ordinary cement in the top layer of the item
of washed stone grit, plaster.

MATERIALS
0368 (A) Add for White Cement tonne 0.10 9,700.00 970.00
0367 (B) Duduct for Ordinary Cement tonne 0.10 4,500.00 (-)450.00
TOTAL = A - B 520.00
TOTAL 525.20
Cost of 10.00 sqm 603.98
Say 60.40
635
13.78 Providing and applying 12 mm thick (average) premixed formulated one coat gypsum
lightweight plaster having additives and light weight aggregates as vermiculite/ perlite
respectively conforming to IS: 2547 (Part - 1 & II) 1976, applied on hacked / uneven
background such as bare brick/ block/ RCC work on walls & ceiling at all floors and
locations, finished in smooth line and level etc. complete.

MATERIALS
0868 Premixed super white gypsum plaster @ kg 169.47 5.20 881.24
16.14kg /sqm = 161.40 + 5% wastage =
161.40+8.07= 169.47 kg.
LABOUR
0155 Mason Day 1.20 146.55 175.86
0115 Coolie Day 1.20 135.25 162.30
TOTAL 1232.01
TOTAL 1244.33
Cost of 10.00 sqm 1430.98
Cost of 1.00 sqm 143.10
Say 143.10
637
SUB HEAD : 14.0

REPAIRS TO BUILDING
639
14.1 Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and
under including cutting the patch in proper shape, raking out joints and preparing
and plastering the surface of the walls complete including disposal of rubbish to the
dumping ground within 50metres lead :
14.1.1 With cement mortar 1:4 (1 cement: 4 fine sand)

Details of cost for 10.00 sqm
MATERIALS
0155 Mason Day 1.21 146.55 177.3
0115 Coolie Day 1.29 135.25 174.47
0114 Beldar Day 0.54 135.25 73.04
0101 Bhisti Day 0.92 138.45 127.37
9999 Scaffolding and sundries L.S. 15.21 1.00 15.21
TOTAL 984.45
TOTAL 994.29
Cost of 10.00 sqm 1,143.43
Cost of 1.00 sqm 114.34
Say 114.35
14.1 Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and
under including cutting the patch in proper shape, raking out joints and preparing
and plastering the surface of the walls complete including disposal of rubbish to the
dumping ground within 50metres lead :
14.1.2 With cement mortar 1:4(1 cement: 4 coarse sand).

Details of cost for 10.00sqrn
MATERIALS
Cement mortar 1:4 (1 cement: 4 coarse sand). cum 0.183 2578.45 471.86
LABOUR Day 1.21 146.55 177.33
0155 Mason Day 1.29 135.25 174.47
0115 Coolie Day 1.29 135.25 73.04
0114 Beldar Day 0.54 138.45 73.04
0101 Bhisti Day 0.92 1.00 127.37
TOTAL 1 039.28
TOTAL 1 049.67
Cost of 10.00 sqm 1 207.12
Cost of 1.00 sqm 120.71
Say 120.70
640
14.2 Fixing chowkhats in existing opening including embedding chowkhats in floors or
walls cutting masonry for holdfasts embedding hold fasts in cement concrete blocks
with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20
mm nominal size) painting two coats of approved wood preservative to sides of
chowkhats and making good the damages to walls and floors as required complete
including disposal of rubbish to the dumping ground within 50 metres lead :
14.2.1 Door chowkhats

Details of cost for 1.00 No.
0295 20 mm nominal size stone Aggregate cum 0.021 700.00 14.70
2202 Carriage of Stone aggregate cum 0.0282 53.21 1.50
0982 Coarse sand cum 0.0141 600.00 8.46
0367 Cement tonne 0.0066 4,500.00 29.70
0114 Beldar Day 0.027 135.25 3.65
0115 Coolie Day 0.0195 135.25 2.64
013O Mistry Day 0.0084 151.50 1.27
0123 Mason (brick layer) 1 st class Day 0.0018 151.50 0.27
0124 Mason 2nd class Day 0.0018 141.60 0.25
0128 Mate Day 0.0012 138.45 0.17
9999 Scaffolding L.S. 1.43 1.00 1.43
9999 Sundries L.S. 0.39 1.00 0.39
Cement mortar 1:6 (1 cement: 6 fine sand) cum 0.01 1687.70 16.88
9999 Cement concrete 1:2:4 filled in chase cut L.S. 24.18 1.00 24.18
9999 Painting two coats of coaltar L.S. 13.52 1.00 13.52
9999 Disposal of mulba L.S. 1.82 1.00 1.82
0155 Mason (average) Day 0.50 146.55 73.28
0114 Beldar Day 0.75 135.25 101.44
9999 Sundries L.S. 2.73 1.00 2.73
TOTAL 305.16
TOTAL 308.21
Cost of 1.00 chowkhat 354.44
Say 354.45

14.2.2 Window chowkhats

Details of cost for 1.00 No
0982 Coarse sand cum 0.0094 600.00 5.64
0367 Cement tonne 0.0044 4500.00 19.80
0114 Beldar Day 0.018 135.25 2.43
641
0115 Coolie Day 0.013 135.25 1.76

0130 Mistry Day 0.0056 151.50 0.85
0128 Mate Day 0.0008 138.45 0.11
9999 Sundries L.S. 0.26 1.00 0.26
Cement mortar 1.6 (1 cement: 6 fine sand) cum 0.006 1687.70 10.13
Rate as per item No. 3.6
9999 Cement concrete 1:2:4 L.S. 9.88 1.00 9.88
0155 Mason Day 0.33 146.55 48.36
0114 Beldar Day 0.50 135.25 67.62
TOTAL 184.40
TOTAL 186.24
Say 214.20

14.2.3 Clerestory window chowkhats
Detail of cost for 1.00 N0.

0982 Coarse sand cum 0.0047 600.00 2.82
0367 Cement tonne 0.0022 4,500.00 9.90
0114 Beldar Day 0.009 135.25 1.22
0115 Coolie Day 0.0065 135.00 0.88
0130 Mistry Day 0.0028 151.50 0.42
0128 Mate Day 0.0004 138.45 0.06
9999 Sundries L.S. 0.13 1.00 0.13
0114 Beldar Day 0.50 135.25 67.62
9999 Sundries L.S. 2.73 1.00 2.73
TOTAL 133.10
TOTAL 134.43
Say 154.60
642
14.3 Fixing chowkhat in existing opening in brick / RCC wall with dash fasteners/chemical
fastners of appropriate size (3nos on each vertical member of door chowkhat and 2
nos. on each vertical member and 1 no. on each horizontal member of window
chowkhat) including Cost of dash fasteners/ chemical fasteners.

Details of cost for 1 chowkhat
0114 Beldar Day 0.027 135.25 3.65
0115 Coolie Day 0.0195 135.25 2.64
0130 Mistry Day 0.0084 151.50 1.27
0128 Mate Day 0.0012 138.45 0.17
9,999 Disposal of mulba L.S. 1.82 1.00 1.82
7,019 Dash fastner/ chemical fastner each 6.00 8.00 48.00
9,999 Hire charges of drill machine, scaffolding and L.S. 12.22 1.00 12.22
sundries.
TOTAL 69.77
TOTAL 70.47
Say 81.05
14.4 Making the opening in brick masonry including dismantling in floor or walls by cutting
masonry and making good the damages to walls, flooring and jambs complete to
match existing surface i/c disposal of mulba/ rubbish to the nearest dumping ground.
14.4.1 For door/ window/ clerestory window.

Details of cost for 1 opening of size 0.90 X
2.10=1.89 sqm.
Rate as per item no. 3.6
0114 Beldar Day 1.20 135.25 162.30
0115 Coolie Day 0.40 135.25 54.10
9999 Scaffolding and Sundries L.S. 3.50 1.00 3.50
TOTAL 332.15
TOTAL 335.47
Cost of 1.89sqm. 385.79
Cost of 1.00 sqm. 204.12
Say 204.10
14.5 Renewing glass panes, with putty and nails wherever necessary:
14.5.1 Float glass panes of thickness 4 mm

Details of cost for 10 glasses area each 0.10 Sqm.
MATERIALS
2406 Glass panes - 1.00 sqm + 10% wastate= 1.10 Sqm sqm 1.10 248.00 272.80
9999 Carriage including sundries L.S. 1.82 1.00 1.82
0863 Putty for wood work kilogram 0.68 24.00 16.32
9999 Painting or varnishing or beewaxing L.S. 5.33 1.00 5.33
9999 Sundries Nails etc. L.S. 6.76 1.00 6.76
643
0119 Glazier Day 0.23 141.60 32.57

0114 Beldar Day 0.23 135.25 31.11
9999 Sundries such as Rag, cotton etc L.S. 1.43 1.00 1.43
TOTAL 368.14
TOTAL 371.82
Add 15% for’contractor’s profit and overheads 55.77
Cost of 1.00 sqm 427.59
Say 427.60
14.5 Renewing glass panes, with putty and nails wherever necessary:
14.5.2 Float glass panes of thickness 5.5 mm

Details of cost for 10 glasses area each 0.10 sqm.
MATERIALS
2407 Glass panes - 1.00 Sqm+10% wastage= 1.10 sqm. sqm 1.10 340.00 374.00
9999 Carriage including sundries L.S. 1.82 1.00 1.82
0863 Putty for wood work Kilogram 0.68 24.00 16.32
0119 Glazier Day 0.23 141.60 32.57
0114 Beldar Day 0.23 135.25 31.11
TOTAL 469.34
TOTAL 474.03
Cost of 1.00 sqm 545.13
Say 545.15
14.6 Renewing glass panes, with wooden fillets wherever necessary:


MATERIALS
2406 Glass panes =1 sqm + 0.1 sqm (wastage @ sqm 1.10 248.00 272.80
10%)=1.10 sqm.
Wooden fillets -
1189 Second class teak wood in scantling 10 cudm 0.25 394.00 9.85
1194 Second class deodar wood in planks 10 cudm 0.25 335.00 8.38
1196 First class kail wood in planks 10 cudm 0.25 186.00 4.65
0119 Glazier Day 0.25 141.60 35.40
0114 Beldar Day 0.45 135.25 60.86
TOTAL 429.23
TOTAL 433.52
Cost of 1.00 sqm 498.55
Say 498.55
644
14.6 Renewing glass panes, with wooden fillets wherever necessary:

MATERIALS
Glass panes =1 sqm + 0.10 sqm (wastage @ sqm 1.10 340.00 374.00
10%)= 1.10 sqm
Wooden fillets -
1189 Second class teak wood in scantling 10 cudm 0.25 394.00 9.85
1194 Second class deodar wood in planks 10 cudm 0.25 335.00 8.38
1196 First class kail wood in planks 10 cudm 0.25 186.00 4.65
0119 Glazier Day 0.25 141.60 35.40
0114 Beldar Day 0.45 135.25 60.86
TOTAL 530.43
TOTAL 535.73
Cost of 1.00 sqm 616.09
Say 616.10
14.7 Renewing glass panes and refixing existing wooden fillets:


MATERIALS
Glass panes = 1.00 sqm
Add Wastage @ 10% = 0.l0sqm
2406 Total = 1.10 sqm sqm 1.10 248.00 272.80
9999 Carriage of glasspanes and other materials L.S. 2.73 1.00 2.73
9999 Methylated spirit L.S. 5.33 1.00 5.33
0119 Glazier Day 0.30 141.60 42.48
0114 Beldar Day 0.30 135.25 40.57
9999 Sundries L.S. 1.43 1.00 1.43
TOTAL 375.22
TOTAL 378.97
Cost of 1.00 sqm 435.82
Say 435.80
645
14.7 Renewing glass panes and refixing existing wooden fillets:

MATERIALS
Glass panes = 1.00 sqm
Add Wastage @ 10% = 0.1 sqm
2407 Total = 1.10 sqm sqm 1.10 340.00 374.00
9999 Carriage of glasspanes and other materials L.S. 2.73 1.00 2.73
9999 Methylated spirit L.S. 5.33 1.00 5.33
0119 Glazier Day 0.30 141.60 42.48
0114 Beldar Day 0.30 135.25 40.57
9999 Sundries L.S. 1.43 1.00 1.43
TOTAL 476.42
TOTAL 481.18
Cost of 1.00 sqm 553.36
Say 553.35
14.8 Supplying and fixing new wooden fillets wherever necessary:

14.8.1 2nd class teak wood fillets

Details of cost for 10.00 metres length
MATERIALS
2nd class teak wood in planks
10.00x0.01x0.01 = 1.00 cudm
Add 15% wastage = 0.15 cudm
1190 Total = 1.15 cudm 10 cudm 1.15 410.00 47.15
9999 Nails L.S. 26.91 1.00 26.91
LABOUR
0114 Beldar Day 0.25 135.25 33.81
9999 Sundries L.S. 2.73 1.00 2 73
TOTAL 146.00
TOTAL 147.46
Say 16.95
14.8 Supplying and fixing new wooden fillets wherever necessary:

14.8.2 Hollock wood fillets.
Details of cost for 10 metres length

MATERIALS
Hollock wood in scantling
10.00x0.01x0.01 = 1.00 cudm
Add 15% wastage =0.15 cudm
646
2466 Total = 1.15 cudm 10 cudm 1.15 217.00 24.96

9999 Nails L.S. 26.91 1.00 26.91
LABOUR
0114 Beldar Day 0.25 135.25 33.81
9999 Sundries L.S. 2.73 1.00 2.73
TOTAL 123.81
TOTAL 125.05
Say 14.40
14.9 Renewal of old putty of glass panes (length)
Details of cost for 13.00 metres length

MATERIALS
0863 Cost of putty kilogram 0.68 24.00 16.32
9999 Nails L.S. 7.15 1.00 7.15
9999 Spirit L.S. 2.73 1.00 2.73
LABOUR
0114 Beldar Day 0.30 135.25 40.57
9999 Sundries L.S. 1.43 1.00 1.43
TOTAL 110.68
TOTAL 111.79
Cost of 13.00 metres 128.56
Say 9.90
14.10 Refixing old glass panes with putty and nails

0863 Cost of putty kilogram 0.68 24.00 16.32
9999 Spirit L.S. 2.73 1.00 2.73
9999 Nails L.S. 7.15 1.00 7.15
LABOUR
0119 Glazier Day 0.30 141.60 42.48

0114 Beldar Day 0.30 135.25 40.57
9999 Sundries L.S. 1.43 1.00 1.43
TOTAL 110.68
TOTAL 111.79
Cost of 1.00 sqm 128.56
Say 128.55
647
14.11 Fixing old glass panes with wooden fillets (excluding cost of fillets)
LABOUR
0119 Glazier Day 0.30 141.60 42.48
0114 Beldar Day 0.30 135.25 40.57
9999 Sundries L.S. 1.43 1.00 1.43
9999 Nails L.S. 3.90 1.00 3.90
TOTAL 88.38
TOTAL 89.26
Cost of 1.00 sqm 102.65
Say 102.65
14.12 Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing
R.C.C. slab including cutting chase and making good and painting exposed portion
of the clamps complete.

Details of cost for each fan clamp.
MATERIALS
1003 M.S.bar 16mm dia = 40cm (including qtl 0.00632 3050.00 19.28
wastage) @ 1.58 Kg/m = 0.632 Kg
9999 Cement concrete 1:2:4 (1 Cement: 2 Coarse L.S. 13.52 1.00 13.52
sand : 4 graded stone aggregate 20mm
nominal size) mortar for rendering or
plastering
9999 Painting two or more coats to exposed portion L.S. 7.15 1.00 7.15
of the clamp including priming coat
Labour for fixing
0102 Blacksmith 1st class Day 0.03 151.50 4.54
0114 Beldar Day 0.25 135.25 33.81
9999 Sundries L.S. 2.73 1.00 2.73
TOTAL 98.02
TOTAL 99.00
Cost of 1 each 113.85
Say 113.85
14.13 Regrading terracing of mud phaska covered with tiles or brick, in cement by
dismantling tiles or bricks, removing mud plaster preparing the surface of mud phaska
to proper slope relaying mud plaster gobri leaping and tiles or bricks, grouted in
cement mortar 1:3 (1 cement : 3 fine sand) including replacing unserviceable tiles or
bricks with new ones and disposal of unserviceable material to the dumping ground
(the cost of the new tiles or brick excluded) within 50 metres lead.

(i) Dismantling tiles/bricks in cement mortar
including removing mud plaster and cleaning
the tiles/bricks
LABOUR
648
0155 Mason (average)) Day 0.54 146.55 79.14
0114 Beldar Day 0.54 135.25 73.04
(ii) Preparing the surface, for mud phuska to
proper slope, relaying mud plaster gobri
leeping.
0155 Mason (average)) Day 0.27 146.55 39.57
25mm thick mud plaster including gobri
leaping
MATERIALS
Mud mortar (Rate as per item No 3.18 cum 0.24 156.85 37.64
0308 Bhusa quintal 0.084 200.00 16.80
2131 Gobri mortar cum 0.12 156.85 18.82
LABOUR
0114 Beldar Day 0.25 135.25 33.81
(iii) relaying tiles/bricks cum 2870.00 0.061 175.07
including Cement mortar 1:3 (1 Cement: 3
fine sand) for grouting (Rate as per item
No. 3.3
LABOUR
0115 Mason Day 1.20 146.55 175.86
0114 Beldar Day 1.50 135.25 202.88
0101 Bhisti Day 1.00 138.45 38.45
9999 Sundries L.S. 2.73 1.00 2.73
TOTAL 999.14
TOTAL 1,009.13
Cost of 10.00 sqm 1,160.50
Cost of 1.00 sqm 116.05
Say 116.05
14.14 Replacing sand stone slabs in roofing laid in cement mortar 1:4 (1 cement: 4 coarse
sand) including necessary repairs and cement pointing with same mortar complete
including disposal of rubbish to dumping ground within 50 metres of lead:
14.14.1 Red/ white sand stone slabs 30 to 50 mm thick.

Dismantling existing stone, slabs roofing 1x10.00
sqmx0.05m = 0.50 cum.
0114 Beldar Day 0.885 135.25 119.70
0115 Coolie Day 0.375 135.25 50.72
9999 Sundries L.S. 4.03 1.00 4.03
9999 Cleaning the surface including necessary L.S. 40.43 1.00 40.43
repairs
1174 Red sand stone slab 45 mm and 50 mm thick sqm 11.00 145.00 1,595.00
(un-dressed)
2216 Carriage of Stone slabs tonne 1.41 47.29 66.68
Cement mortar, 1:4(1 cement: 4 coarse sand). cum 0.0105 2,578.45 27.07
(Rate as per item No. 3.9 of SH - Mortar)
Cement mortar 1:3 (1 cement :3 fine sand).
(Rate as per item 3.3 of SH- Mortar) cum 0.0075 2,870.00 21.52
0155 Mason Day 1.69 146.55 247.67
0100 Bandhani Day 2.03 138.45 281.05
649
0115 Coolie Day 1.69 135.25 228.57
0101 Bhisti Day 0.34 138.45 47.07
9999 Sundries L.S. 16.12 1.00 16.12
2264 Carriage of Rubbish cum 0.50 53.21 26.60
TOTAL 2,772.23
TOTAL 2,799.95
Cost of 10.00 sqm 3,219.94
Cost of 1.00 sqm 321.99
Say 322.00
14.15 Renewing wooden battens in roofs, including making good the holes in wall and
painting with oil type wood preservative of approved brand and manufacture
complete including removal of rubbish to the dumping ground within 50 metres
lead:
14.15.1 Sal wood battens.

Details of cost for 10 battens i.e. 300 cudm
3 metres long of 100x100mm
10x3x0.1x0.1 = 0.3cum =300cudm
Add wastage @ 2%= 6 cudm, Total = 306.00
cudm
MATERIALS
1199 Sal wood battens 10 cudm 306.00 218.00 6,670.80
2204 Carriage of battens cum 0.306 60.81 18.61
LABOUR
Taking out the existing battens and refixing
new one including supporting the roof
0114 Beldar Day 2.00 135.25 270.50
9999 Making good the holes including sundries L.S. 80.73 1.00 80.73
0131 Painter Day 0.183 141.60 25.91
0115 Coolie Day 0.183 135.25 24.75
9999 Carriage L.S. 0.78 1.00 0.78
9999 Brushes L.S. 5.07 1.00 5.07
9999 Sundries L.S. 4.81 1.00 4.81
TOTAL 7,251.29
TOTAL 7,323.80
Add 15% for contractor’s profit and overheads 1,098.57
Cost of 300 Cudm 8,422.37
Cost of 1.00 cum 28,074.57
Say 28,074.55
650
14.16 Renewing wooden beams in roofs including making good the holes in walls and
lead :
14.16.1 Not exceeding 4.00 metres in length.
14.16.1.1 Sal wood beams

Details of cost for one beam i.e. 300 cudm.
0.25 x 0.30m x 4.0m (long) = 0.30 cum
Add wastage @ 2% (0.006 cum) = 0.306 cum
= 306 cudm
Propping the roof
MATERIALS
100mm diameter ballies 4m long 10 nos.
100x100mm salwood battens 1.0 metre long 5
nos.x 1.0x0.1 xO. 1 =0.05cum = 50 cudm.
These materials can be used for 16 times
Hence qty for one operation 1/16 = 3.125
cudm
1199 Sal wood beams 10 cudm 3.125 218.00 68.12
2204 Carriage of Timber cum 0.0228 60.81 1.39
LABOUR
0114 Beldar Day 0.25 135.25 33.81
(ii) Taking out the existing beams etc.
LABOUR
0155 Mason (Avarage) Day 0.13 146.55 19.05
0100 Bandhani Day 0.50 138.45 69.22
0114 Beldar Day 0.33 135.25 44.63
(iii) Renewal
(a) Materials and Labour
1199 Sal wood beam wrought 10 cudm 306.00 218.00 6,670.80
2204 Carriage of beams cum 0.306 60.81 18.61
0100 Bandhani Day 0.50 138.45 69.22
0114 Beldar Day 1.00 135.25 135.25
Painting with oil preservative
(4x1.1) +(2.0x0.25x0.30) =4.4 + 0.15 = 4.55-
sqm
0859 Paint litre 0.455 60.00 27.30
0131 Painter Day 0.07 141.60 9.91
0115 Coolie Day 0.07 135.25 9.47
9999 Sundries L.S. 0.13 1.00 0.13
9999 Carriage L.S. 1.82 1.00 1.82
9999 Brushes L.S. 1.82 1.00 1.82
9999 Making good the holes L.S. 20.67 1.00 20.67
9999 Sundries L.S. 26.91 1.00 26.91
0302 SafedaBalli 125mmdia mtr 2.50 29.00 72.50
TOTAL 7,477.63
TOTAL 7,552.41
Cost of 1.00 cum 28,950.90
Say 28,950.90
651
lead :
14.16.1 Not exceeding 4.00 metres in length.
14.16.1.2 Hollock wood beams

0.25 x 0.30m x 4.0m (long) = 0.30 cum
=306cudm
(I) Propping the roof
MATERIALS
100mm diameter bailies 4m long 10 nos.
100x100mm Hallock wood Ballens 1.0 metre long 5
nos.x 1.0x0.1x0.1 =0.05cum = 50 cudm.
hence qty for one operation 1/16 = 3.125
cudm
2466 Hollock wood beams 10 cudm 3.125 217.00 67.81
LABOUR
0114 Beldar Day 0.25 135.25 33.81
(a) LABOUR
0155 Mason Day 0.13 146.55 19.05
0100 Bandhani Day 0.50 138.45 69.22
0114 Beldar Day 0.33 135.25 44.63
(iii) Renewal
(a) Materials and Labour
2466 Hollock wood in scantling 10 cudm 306.00 217.00 6,640.20
0100 Bandhani Day 0.50 138.45 69.22
0114 Beldar Day 1.00 135.25 135.25
(4x1.1)+ (2.0x0.25x0.30) =4.4+ 0.15 =4.55 sqm
0131 Painter Day 0.07 141.60 9.91
0115 Coolie Day 0.07 135.25 9.47
9999 Sundries L.S. 0.13 1.00 0.13
9999 Carriage L.S. 1.82 1.00 1.82
9999 Brushes L.S. 1.82 1.00 1.82
9999 Sundries L.S. 26.91 1.00 26.91
0302 Safeda Balli 125 mm dia mtr 2.50 29.00 72.50
TOTAL 7,446.72
TOTAL 7,521.19
Cost of 1.00 cum 28,831.23
Say 28,831.20
652
lead:
14.16.2 Above 4.00 metres and upto 5.00 metres length.
14.16.2.1 Sal wood beams

0.25 x 0.30m x 5.0m (long) = 0.375 cum
=383 cudm
MATERIALS
125mm diameter ballies 5m long 12 nos
nos. x 1.0x0.1 xO. 1 =60 cudm.
hence qty for one operation 1/16 = 3.75 cudm
1199 Sal wood beams 10 cudm 3.75 218.00 81.75
LABOUR
0 114 Beldar Day 0.25 135.25 33.81
LABOUR
0155 Mason Day 0.25 146.55 36.64
0100 Bandhani Day 0.63 138.45 87.22
0114 Beldar Day 0.50 135.25 67.62
(iii) Renewal
Materials and Labour
1199 Sal wood in scantling 10 cudm 383.00 218.00 8,349.40
0100 Bandhani Day 1.00 138.45 138.45
0 114 Beldar Day 2.00 135.25 270.50
(2x5x0.25)+3.0 + 2.0x0.25x0.30 = 5.5 + 0.15
= 5.65 sqm
0131 Painter Day . 0.08 141.60 11.33
0115 Coolie Day 0.08 135.25 10.82
9999 Sundries L.S. 0.26 1.00 0.26
9999 Carriage L.S. 2.34 1.00 2.34
9999 Brushes L.S. 2.21 1.00 2.21
9999 Sundries L.S. 33.15 1.00 33.15
0302 Safeda balli 125 mm dia mtr 3.75 29.00 108.75
TOTAL 9,492.14
TOTAL 9,587.06
Cost of 375 Cudm 11,025.12
Cost of 1.00 cum 29,400.32
Say 29,400.30
653
lead :
14.16.2 Above 4.00 metres and upto 5.00 metres length.
14.16.2.2 Hollock wood beams

0.25 x 0.30m x 5.0m (long) = 0.375 cum
= 3 83 cudm
MATERIALS
125mm diameter bailies 5m long 12 nos
nos. x 1.0x0.1x0.1 = 60 cudm.
hence qty for one operation 1/16 = 3.75 cudm
2466 Hollock wood in scantling 10 cudm 3.75 217.00 81.38
LABOUR
0114 Beldar Day 0.25 135.25 33.81
LABOUR
0155 Mason Day 0.25 146.55 36.64
0100 Bandhani Day 0.63 138.45 87.22
0114 Beldar Day 0.50 135.25 67.62
(iii) Renewal
Materials and Labour
0100 Bandhani Day 1.00 138.45 138.45
0114 Beldar Day 2.00 135.25 270.50
(2x5xO.25)+3.O + 2.0x0.25x0.30 = 5.5 + 0.15
= 5.65 sqm
0131 Painter Day 0.08 141.60 11.33
0115 Coolie Day 0.08 135.25 10.82
9999 Sundries L.S. 0.26 1.00 0.26
9999 Carriage L.S. 2.34 1.00 2.34
9999 Brushes L.S. 2.21 1.00 2.21
9999 Sundries L.S. 33.15 1.00 33.15
0302 Safedaballi 125 mm dia mtr 3.75 29.00 108.75
TOTAL 9,452.72
TOTAL 9,547.25
Add-15% for contractor’s profit and overheads 1,432.09
Cost of 375 Cudm 10,979.34
Cost of 1.00 cum 29,278.24
Say 29,278.20
654
14.17 Raking out joints in lime or cement mortar and preparing the surface for re-pointing
or replastering including disposal of rubbish to the dumping ground within 50
metres lead.

Details of cost for 10 sqm
LABOUR
0114 Beldar Day 0.53 135.25 71.68
0 115 Coolie Day 0.08 135.25 10.82
0101 Bhisti Day 0.07 138.45 9.69
9999 Sundries L.S. 1.43 1.00 1.43
TOTAL 93.62
TOTAL 94.56
Cost of 10.00 sqm 108.74
Say 10.85
14.18 Flush pointing with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of
integral water proofing compound by weight of cement for flat tile bricks on top of
mud phaska :
14.18.1 With F.P.S. brick tiles

MATERIALS
Cement mortar 1:3 (1 cement: 3 fine and) cum 0.015 2,870.00 43.05
(Rate as per item No. 3.3) 2% of wt. of cement
1213 Water proofing materials kilogram 0.153 20.00 3.06
LABOUR
0115 Coolie Day 0.36 135.25 48.69
0101 Bhisti Day 0.36 138.45 49.84
9999 Sundries L.S. 18.85 1.00 18.85
TOTAL 214.47
TOTAL 216.61
Cost of 10.00 sqm 249.10
Say 24.90
14.18 Flush pointing with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of
integral water proofing compound by weight of cement for flat tile bricks on top of
mud phaska :
14.18.2 With modular brick tiles

MATERIALS
Cement mortar, 1:3 (1 cement: 3 fine sand). cum 0.017 2870.00 48.79
1213 Water proofing material 2% of wt. of cement kilogram 0.173 20.00 3.46
655
LABOUR
0115 Coolie Day 0.36 135.25 48.69
0101 Bhisti Day 0.36 138.00 49.84
9999 Sundries L.S. 18.85 1.00 18.85
TOTAL 220.61
TOTAL 222.82
Cost of 10.00 sqm 256.24
Say 25.60
14.19 Taking out wind ties from roof including cutting out rusted bolts, nuts etc. and
removing materials to any distance within compound and stacking.

M.S. Flats 40x6mm @ 1.9kg./m = 30x1.9 =
57 kg.(A)
J’ hook bolts @ 30cm centre to centre
= 101 Nos. x 0.15 m = 15.15 m @ 0.40kg./m
= 6.06kg
Total (A+B) = 63.06 kg Say 63.00 kgs
LABOUR
0103 Blacksmith 2nd class Day 0.09 141.60 12.74
0100 Bandhani Day 0.06 138.45 8.31
0114 Beldar Day 0.16 135.25 21.64
TOTAL 42.69
TOTAL 43.12
Cost for 63 kg. 49.59
Cost of 1.00 kg 0.79
Say 0.80
14.20 Fixing of old wind tie with new fittings including painting two or more coats with
anticorrosive bitumastic paint of approved brand & manufacturer over and including
priming coat of ready mixed zinc chromate yellow primer of approved brand.

Detail of cost for 20.2 m wind tie
MATERIALS
1023 G.I. - J or L hooks with nuts and bolts 8 mm 10 Nos 68.00 58.00 394.40
dia @ 30 cm center to center = 68 nos
1208 Bitumen washer 100 Nos 68.00 18.00 12.24
1209 G.I. Washer (thick) 100 Nos 68.00 27.00 18.36
9999 Carriage of bolts, nuts and washers etc. L.S. 1.17 1.00 1.17
LABOUR
0114 Beldar Day 0.34 135.25 45.99
9999 Sundries L.S. 13.91 1.00 13.91
Applying priming coat with ready mixed zink
chromate yellow primer
20.2x2x(0.04+0.006) = 1.86 sqm
656
(Rate as per item no 13.50.3 of SH Finishing) sqm 1.86 12.65 23.53 (A)
Painting with ready mixed black anti corrosive
bitumastic paint
(‘Rate as per item no 13.65.1 of SH Finishing) sqm 1.86 24.80 46.13 (A)
TOTAL 607.24
Add 1% for water charges on all except ‘A’ 5.38
TOTAL 612.62
on all except ‘A’
Cost for 20.2 metres 694.06
Say 34.35
14.21 Renewing bottom rail and/or top rubber of collapsible gate including making good
all damages and applying priming coat of zinc chromate yellow primer of approved
brand and manufacturer.

Detail of cost for gate of size 1.52x2.4 m
(weight 11.55 kg)
MATERIALS
M.S. Tee 40x40x6 mm
Top rail = 1.725 m–
Bottom rail = 1.570 m
Total = 3.295 m say 3.30 m @ 3.5 kg/m =
11.55 kg
Add 10% wastage = 1.155 kg
1007 2205
1007 Total = 12.705 kg = 0.1270 q say 0.13 q quintal 0.13 3100.00 403.00
2205 Carriage of Tee 12.70 kg = 0.13 q tonne 0.013 47.29 0.61
Taking out collapsible gate including frame
(Rate as per item no 15.12.2 of SH each 1.00 75.35 75.35 (A)
Dismantling and Demolishing)
Refixing of collapsible gate including
mending good the demaged floor, wall
etc.frame
Cement concrete 1:3:6 (1 cement: 3 coarse
sand : 6 graded stone aggregate 20 mm
nominal size)
(Rate as per item no 4.2.5 of SH concrete work) cum 0.03 3112.70 93.38 (A)
Cement mortar, 1:6 (1 cement: 6 fine sand) cum 0.01 1687.70 16.88
(Rate as per item No. 3.6 of SH- mater)
Priming coat on Tees 0.16x3.3 = 0.53 sqm
(Rate as per item no 13.50 of SH Finishing) sqm 0.53 12.65 6.70 (A)
Labour for fixing the gate
0155 Mason Day 0.50 146.55 73.28
0114 Beldar Day 0.75 135.25 101.44
9999 Sundries L.S. 2.60 1.00 2.60
TOTAL 799.24
TOTAL 805.48
Cost for 11.55 kg 899.99
Cost of 1.00 kg 77.92
Say 77.90
657
14.22 Renewing Wrought iron or M.S. Wheel or roller of steel door or gate and fitting and
fixing the same with necessary clamps, nuts and bolts/welding and erection etc.
complete.
14.22.1 Wheel 50 mm dia. and below.

Detail of cost for 10 wheels of 40 mm dia.
Materials to be dismentled
Weight of 10 wheels
10x[3.14x{(4/2)x(4/2)}x4]x7.850/1000 =
3.94 kg
Weight of 10 nos clamps 6 mm thick =10xlength
of clamp =10x0.17m @ 1.90kg/m = 3.23
kg
Weight of 10 nos 10 mm dia. Bolts, 10 cm
long 10x0.10m = lm @ 0.60 kg/m = 0.60 kg
Total = 7.70 kg say 8 kg
Labour for dismantling:
0100 Bandhani Day 0.01 138.45 1.38
0114 Beldar Day 0.02 135.25 2.70
9999 Sundries L.S. 0.39 1.00 0.39
Renewing the wheels with clamps :-
MATERIALS
7442 10 nos wheels 40 mm dia. 40 mm wide each 10.00 52.00 520.00
10 nos clamps out of M.S. flat 40x6 mm, 170
mm long = 10x0.17m = 1.70m @ 1.9 kg/m =
3.23 kg
1008 Total = 3.39 kg say 3.50 kg quintal 0.035 2900.00 101.50
1034 M.S. bolt/pin 10 mm dia 10 cm long 10 nos quintal 0.006 4300.00 25.80
10x0.06 = 0.6 kg = 0.006 q
1215 Welding charges (electrical) length = cm 80.00 1.00 80.00
10x(2x4) = 80cm
Labour for cutting, assembling and errection
charges;
0100 Bandhani Day 0.02 138.45 2.77
0114 Beldar Day 0.11 135.25 14.88
Priming coat: = 10x2(0.06+0.008)x0.25m =
0.34 sqm Tees 0.16x3.3 = 0.53 sqm
(A) (Rate as per item no 13.50.3 of SH Finishing) sqm 0.165 12.65 2.09 (A)
9999 Sundries L.S. 1.69 1.00 1.69
TOTAL 759.16
TOTAL 766.73
Cost for 10 wheels 881.43
Cost for 1 wheel 88.14
Say 88.15
658
14.22 Renewing Wrought iron or M.S. Wheel or roller of steel door or gate and fitting and
fixing the same with necessary clamps, nuts and bolts/welding and erection etc.
complete.
14.22.2 Wheel above 50 mm dia.

Detail of cost for 10 wheels
Considering average wheel dia =75 mm
Width of wheel =40 mm
M.S. flat for clamp = 60x8 mm
Bolt size 16 mm dia.
Lenth of one clamp :
2x(0.04+0.0375+0.02)+0.05
=0.195+0.05=0.245m say 0.25m
Materials to be dismentled
Weight of 10 nos wheels
10x[3.14x{(7.5/2)x(7.5/2)}x4]x7.850/1000 =
13.87 kg
Weight of 10 nos clamps 8 mm thick
= 10x0.25 m @ 3.8kg/m = 9.50 kg
Weight of 10 nos 16 mm dia. Bolts, 10 cm
long 10x0.10 m @ 1.60 kg/m = 1.60 kg
Total = 24.97 kg say 25 kg
Labour for dismantling:
0100 Bandhani Day 0.03 138.45 4.15
0114 Beldar Day 0.06 135.25 8.12
9999 Sundries L.S. 1.04 1.00 1.04
Renewing the wheels with clamps :-
MATERIALS
7442 10 nos wheels 75 mm dia. 40 mm wide each 10.00 52.00 520.00
10 nos clamps out of M.S. flat 60x8 mm =
10x0.25 m @ 3.8 kg/m = 9.5 kg
1008 Total = 9.48 kg say 10 kg quintal 0.10 2,900.00 290.00
1034 M.S. bolt/pin 16 mm dia 10 cm long 10 nos quintal 0.016 4,300.00 68.80
10x0.16= 1.6 kg = 0.016 q
1215 Welding charges (electrical) lenth = 10x(2x6) cm 120.00 1.00 120.00
Labour for cutting, assembling and errection
charges;
0100 Bandhani Day 0.05 138.45 6.92
0114 Beldar Day 0.36 135.25 48.69
Priming coat: = 10x2(0.06+0.008)x0.25m =
0.34 sqm Tees 0.16x3.3 = 0.53 sqm
(A) (Rate as per item no 13.50.3 of SH Finishing) sqm 0.34 12.65 4.30(A)
9999 Sundries L.S. 5.33 1.00 5.33
TOTAL 1,098.16
TOTAL 1,109.10
Cost for 10 wheels 1,274.82
Cost for 1 wheel 127.48
Say 127.50
659
14.23 Pumping out water caused by springs, tidal or river seepage, broken water mains or
drains and the like.

Details for 10.91 Kiloletre
Pumping hours 3 hrs. or 0.375 days
0011 Cost of pumping water with 4000 Iitres per Day 0.375 300.00 112.50
hour capacity pump
0114 Beldar for clearing slush Day 2.00 135.25 270.50
TOTAL 383.00
Add for water charge @ 1 % 3.83
TOTAL 386.83
Add for contractor’s profit and over-heads @ 58.02
15%
Cost of 10.91 Kiloletre 444.85
Cost of 1 Kiloletre 40.77
Say 40.75
14.24 Mud mortar

Detail of cost for one cum
MATERIALS
0811 Mud (dry) cum 1.08 20.00 21.60
LABOUR
0114 Beldar Day 0.63 135.25 85.21
0101 Bhisti Day 0.315 138.45 43.61
9999 Sundries L.S. 6.45 1.00 6.45
TOTAL 156.87
Cost of one cum 156.87
Say 156.85
14.25 Brick work with bricks of class designation 75 in mud mortar

Details of cost for 1 cum.
MATERIALS :
2602 Bricks of class designation 75 1 000 494.00 1900.00 938.60
Nos
2131 Mud mortar cum 0.25 156.85 39.21
2201 Carriage of bricks 1 000 494.00 141.88 70.09
9999 Sundries L.S. 2.73 1.00 2.73
LABOUR:
0123 Mason 1st Class Day 0.36 151.50 54.54
0124 Mason Ilnd Class Day 0.36 141.60 50.98
0115 Coolie Day 1.37 135.25 185.29
0101 Bhishti Day 0.20 138.45 27.69
TOTAL 1,369.13
TOTAL 1,382.82
Add for contractor’s profit and overheads @ 207.42
15%
Cost of 1 Cum. 1,590.24
Say 1,590.25
660
14.26 Providing and fixing 25 mm thick shutters for cup board etc. :
14.26.1 Panelled or panelled & glazed shutters:
14.26.1.1 Superior class teak wood including nickel plated bright finished M.S. piano hinges
with necessary screws.

Details of cost for shutter of cup-board
200xl08cm = 2.16 sqm.
Materials:
Styles-
4x200x8.0x2.5cm = 0.016 cum+
Rails-
Top rail-
1x110.5x8.0x2.5cm = 0.0022 cum+
Lock and bottom rails
2x110.5x8.0x2.5 cm = 0.0044
Panels
2x48x41x1.6cm = 0.006 cum+
Sash bars-
2x114x3.8x2.5cm = 0.003cum+
6x48x3.8x2.5cm = 0.003 cum+
Beading-
16x92x1.4x1.2cm = 0.002cum
Total = 0.0366
Add for wastage @ 10% = 0.0037 cum.
Grand Total = 0.0403 cum.
1186 Superior class teak wood 10 cudm 40.00 895.00 3,580.00
2204 Carriage of timber cum 0.04 60.81 2.43
2406 Glasses 10kg/sqm 4mm thick sqm 0.99 248.00 245.52
Fittings-
0608 Nickle plated bright finished M.S. Piano metre 4.00 21.00 84.00
hinges
0639 Screws 25 mm 100 Nos 120.00 15.00 18.00
Labour-
0111 Carpenter I class Day 2.40 151.00 363.60
0119 Glazier Day 0.18 141.60 25.49
0114 Beldar Day 0.77 135.25 104.14
9999 Sundries L.S. 40.43 1.00 40.43
TOTAL 4,463.61
TOTAL 4,508.25
Cost of 2.16 sqm. 5,184.49
Cost of 1 sqm. 2,400.23
Say 2,400.25
14.26 Providing and fixing 25 mm thick shutters for cup board etc.:
14.26.1 Panelled or panelled & glazed shutters :
14.26.1.2 1st class teak wood including nickel plated bright finished M.S piano hinges

Details of cost for shutters of a cup-board (half
glazed and half panelled) 200xl08cm = 2.16
sqm.
Materials:
661
Styles-
4x200x8.0x2.5cm = 0.016 cum+
Rails-
Top rail-
1x110.5x8.0x2.5cm = 0.0022cum+
Lock and bottom rail-
2x110.5x8.0x2.5cm = 0.0044 cum.
Panels-
2x48x41xl.6cm = 0.006cum+
Sash bars-
2x114x3.8x2.5cm = 0.003cum+
6x48x3.8x2.5cm = 0.003 cum+
Beading-
16x92x 1.4x 1.2cm = 0.002cum
Total = 0.0366
1188 First class teak wood in planks 10 cudm 40.00 506.00 2,024.00
2406 Glasses lOkg/sqm 4mm thick sqm 0.99 248.00 245.52
Fittings-
0608 Nickle plated bright finished M.S. Piano metre 4.00 21.00 84.00
hinges
0639 Screws 25mm 100 Nos 120.00 15.00 18.00
Labour-
0111 Carpenter I class Day 2.40 151.50 363.60
0119 Glazier Day 0.18 141.60 25.49
0114 Beldar Day 0.77 135.25 104.14
9999 Sundries L.S. 40.43 1.00 40.43
TOTAL 2,907.61
TOTAL 2,936.69
Cost of 2.16 sqm. 3,377.19
Cost of 1 sqm. 1,563.51
Say 1,563.50
14.26.2 Glazed shutters:
14.26.2.1 Superior class teak wood including nickel plated bright finished MS. piano hinges
200x108cm = 2.16 sqm.
Materials :
(i) Teak wood first class
Styles : 4x200x9.5x2.5 cm = 0.019 cum
Rails
Top & intermediate rails
2x110.5x9.5x2.5 cm = 0.006 cum
2x110.5x19.7x2.5 cm = 0.011 cum
Beadings-
2x186.lxl.9xl.2cm = 0.001cum+
4x 171.70x 1.9x 1.2cm = 0.002cum.
Total = 0.039 cum.
1186 Superior class teak wood such as Dandeli, 10 cudm 43.00 895.00 3 848.50
Balarshah or Malabar in planks
662
2406 (ii) Glasses (lOkg/sqm) 4.0mm thick sqm 1.27 248.00 314.96
0608 (iii) Piano hinges-75x45x3.2 mm metre 4.00 21.00 84.00
0639 (iv)M.S. screws 25 mm 100 Nos 120.00 15.00 18.00
0597 M.S. butt hinges50x37x 1.50 mm 10 Nos 2.00 28.00 5.60
0640 M.S. screws 20 mm 100 Nos 8.00 15.00 1.20
2204 (v) Carriage of timber cum 0.043 60.81 2.61
Labour:
0156 Carpenter (Avg.) Day 1.83 146.55 268.19
0119 Glazier Day 0.23 141.60 32.57
0114 Beldar Day 0.77 135.25 104.14
9999 Sundries L.S. 40.43 1.00 40.43
TOTAL 4,720.20
TOTAL 4,767.40
Cost of 2.16 sqm. 5,482.51
Cost of 1 sqm. 2,538.20
Say 2,538.20
14.26.2 Glazed shutters :
14.26.2.2 1st class teak wood including nickel plated bright finished M.S. piano hinges with
necessary screws.

200x108cm = 2.16 sqm.
Materials :
(i) Teak wood first class
Styles : 4x200x9.5x2.5 cm = 0.019 cum
Rails
Top & intermediate rails
2x110.5x9.5x2.5 cm = 0.006 cum
2x110.5x19.7x2.5 cm = 0.011 cum
Beadings-
2x186. lxl.9x1.2cm = 0.001cum+
4xl71.70xl.9xl.2cm = 0.002cum.
Total = 0.039 cum.
1188 Teak wood First class 10 cudm 43.00 506.00 2,175.80
2406 (ii) Glasses (lOkg/sqm) 4.0mm thick sqm 1.27 248.00 314.96
0608 (iii) Piano hinges-75x45x3.2 mm metre 4.00 21.00 84.00
0639 (iv)M.S. screws 25 mm 100 Nos 120.00 15.00 18.00
0597 M.S. butt hinges50x37xl .50 mm 10 Nos 2.00 28.00 5.60
0640 M.S. screws 20 mm 100 Nos 8.00 15.00 1.20
2204 (v) Carriage of timber cum 0.043 60.81 2.61
Labour:
0156 Carpenter (Avg.) Day 1.83 146.55 268.19
0119 Glazier Day 0.23 141.60 32.57
0114 Beldar Day 0.77 135.25 104.14
9999 Sundries L.S. 40.43 1.00 40.43
TOTAL 3,047.50
TOTAL 3,077.98
Cost of 2.16 sqm. 3,539.68
Cost of 1 sqm. 1,638.74
Say 1,638.75
663
14.27 Providing and fixing plain jaffri door and window shutters including bright or/and
black enamelled M.S. butt hinges with necessary screws 35xl0mm laths placed
35mm apart (frames to be paid separately) including fixing 50x12mm beading
complete with
14.27.1 Second class teak wood.

Details of cost of a jaffri shutter 176x86 cm =
1.51 sqm
Materials
Teak wood 2nd class
Styles 2x176x7.5x3.5 cm = 0.0092 cum
Rails 3x86x7.5x3.5 = 0.0068 cum
Total 0.0160 cum
Add wastage @ 10 % =0.0016 cum
Total = 0.0176 cum Say 18 cudm
1190 Teak wood 2nd class 10 cudm 18.00 410.00 738.00
Plain Jaffri work
(Rate as per item no. 9.41) sqm 1.51 890.00 1,343.90(A)
0595 Iron hinges 100x58x 1.9 mm 10 Nos 6.00 54.00 32.40
0597 Iron hinges 50x37x1.5 mm 10 Nos 2.00 28.00 5.60
0637 Screws 40 mm 100 Nos 48.00 30.00 14.40
0640 Screws 20 mm 100 Nos 8.00 15.00 1.20
LABOUR
(For making frame and fixing fitting)
TOTAL 2,179.07
TOTAL 2,187.42
Cost of 1.51 sqm. 2,313.95
Cost of 1 sqm. 1,532.42
Say 1,532.40
14.28 Providing and fixing curtain rods of 1.25mm thick brass plates with two brass
brackets fixed with brass screws and wooden plugs etc. wherever necessary
complete.
14.28.1 20 mm diameter.

Detail of cost for 2 m long
Materials
0444 Brass curtain rod 20 mm dia metre 2.00 63.00 126.00
0446 Brass bracket each 2.0 Nos 24.00 48.00
9999 Screws L.S. 2.73 1.00 2.73
9999 Carriage L.S. 1.56 1.00 1.56
Wooden plugs including cutting brick work
and fixing in cement mortar
(A) (Rate as per item no 9.32) each 2.00 10.15 20.30 (A)
664
9999 Labour L.S. 2.73 1.00 2.73
9999 Sundries L.S. 1.56 1.00 1.56
TOTAL 202.88
TOTAL 204.71
Cost of 2 m 232.37
Cost of 1 m 116.19
Say 116.20
14.28 Providing and fixing curtain rods of 1.25mm thick brass plates with two brass
brackets fixed with brass screws and wooden plugs etc. wherever necessary
complete.
14.28.2 25 mm diameter.
Detail of cost for 2 m long
Materials
0445 Brass curtain rod 25 mm dia metre 2.00 79.00 158.00
0446 Brass bracket each 2.00 24.00 48.00
9999 Screws L.S. 2.73 1.00 2.73
9999 Carriage L.S. 1.56 1.00 1.56
Wooden plugs including cutting brick work
and fixing in cement mortar
A (Rate as per item no 9.32) each 2.00 10.15 20.30 (A)
9999 Labour L.S. 2.73 1.00 2.73
9999 Sundries L.S. 1.56 1.00 1.56
TOTAL 234.88
TOTAL 237.03
Cost of 2 m 269.54
Cost of 1 m 134.77
Say 134.75
14.29 Providing and fixing M.S. round or square bars with M.S. flats at required spcing in
wooden frames of windows and clerestory windows.
Details of cost for window -140x110cm
Materials:
M.S. bar 16 mm dia 13x136 cm = 17.68 m @
1.57 kg/m = 27.93 kg
Add for wastage @ 10% =2.79 kg
Total = 30.72 kg or 0.307 q
1003 M.S. bar quintal 0.307 3,050.00 936.35
M.S. flat 40x6mm 2x96cm = 192cm+
1x110cm = 110cm
= 302cm+
Add wastage @ 10% = 30cm
Total = 332cm.@ 1.90 kg/m = 6.31 kg Say
0.063 quintal
1008 M.S. flat quintal 0.063 2,900.00 182.70
2205 Carriage of steel (0.307+0.063 = 0.37 q = tonne 0.037 47.29 1.75
0.037 t)
665

9999 Sundries L.S. 26.91 1.00 26.91
Labour-
0114 Beldar Day 0.45 135.25 60.86
TOTAL 1,286.45
TOTAL 1,299.31
15%
Cost of 33.67 kg.(5.74+27.93=33.67kg) 1,494.21
Cost per kg. 44.38
Say 44.40
14.30 Providing joists (karries) including hoisting fixing in position and applying wood
preservative on unexposed surface etc. complete with:
14.30.1 Sal wood.

Details of cost for 300cudm.
Materials-
Sal wood
10x30xl0x30cm = 0.30 cum. or = 300 cudm.+
Add wastage @ 2% = 6.00 cudm.
Total = 306 cudm.
1199 Sal wood 10 cudm 306.0 218.00 6,670.80
Labour-
0114 Beldar Day 1.45 135.25 196.11
0100 Bandhani Day 0.70 138.45 96.92
Priming coat (Wood preservative)
(Rate as per item no 13 .57.1) sqm 0.80 12.80 10.24 (A)
9999 Sundries L.S. 26.91 1.00 26.91
TOTAL 7,118.71
Add for water charge @ 1 % on all except (A) 71.08
TOTAL 7,189.79
Add for contractor’s profit and overheads @ 1,076.93
15°/o on all except (A)
Cost for 300 cudm. 8,266.72
Cost of 1 cum. 27,555.73
Say 27,555.70
14.30 Providing joists (karries) including hoisting fixing in position and applying wood
preservative on unexposed surface etc. complete with:
14.30.2 Hollock wood.

Details of cost for 300cudm.
Materials-
Hollock wood in scantling
10x30xl0x30cm = 0.30 cum. or = 300 cudm.+
Add wastage @ 2% = 6.00 cudm.
Total = 306 cudm.
666
Labour-
0114 Beldar Day 1.45 135.25 196.11
0100 Bandhani Day 0.70 138.45 96.92
Priming coat (Wood preservative)
(A) (Rate as per item no 13.57.1) sqm 0.80 12.80 10.24 (A)
9999 Sundries L.S. 26.91 1.00 26.91
TOTAL 7,088.11
Add for water charge @ 1% on all except (A) 70.78
TOTAL 7,158.89
15% on all except (A)
Cost for 300 cudm. 8,231.19
Cost of 1 cum. 27,437.30
Say 27,437.30
14.31 Providing and fixing bright finished brass single acting spring hinges with necessary
screws etc. complete :
14.31.1 150 mm

Details of cost for 10 nos.
Materials-
0389 Brass spring hinges 150 mm each 10.00Nos 200.00 2,000.00
0449 Brass screws 50 mm 100 Nos 80.00 107.00 85.60
9999 Carriage of materials L.S. 3.64 1.00 3.64
Labour-
0111 Carpenter 1st class Day 0.40 151.50 60.60
0114 Beldar Day 0.20 135.25 27.05
TOTAL 2,176.89
Add for water charge @ 1% 21.77
TOTAL 2,198.66
15%
Cost of 10 hinges 2,528.46
Cost of 1 hinge 252.85
Say 252.85
14.31 Providing and fixing bright finished brass single acting spring hinges with necessary
screws etc: complete :
14.31.2 125 mm

Materials-
0390 Brass spring hinges 125 mm each 10 Nos 158.00 1,580.00
0449 Brass screws 50mm 100 Nos 80 Nos 107.00 85.60
Labour-
0114 Beldar Day 0.20 135.25 27.05
TOTAL 1,756.89
TOTAL 1,774.46
15%
Say 204.05
667
14.31: Providing and fixing bright finished brass single acting spring hinges with necessary
14.31.3: 100 mm
Materials-
0391 Brass spring hinges 100 mm each 10.00 106.00 1,060.00
Labour-
0114 Beldar Day 0.20 135.25 27.05
TOTAL 1,228.09
TOTAL 1,240.37
Add for contractor’s profit and overheads @15% 186.06
Say 142.65
14.32: Providing and fixing bright finished brass double acting spring hinges with nece-
ssary screws etc. complete :
14.32.1: 150 mm
Materials-
0392 Brass double acting spring hinges 150 mm each 10.00 317.00 3,170.00
Labour-
0114 Beldar Day 0.20 135.25 27.05
TOTAL 3,346.89
TOTAL 3,380.36
Say 388.75
14.32 : Providing and fixing bright finished brass double acting spring hinges with necessary
14.32.2 :125 mm
Materials-
Labour-
0114 Beldar Day 0.20 135.25 27.05
TOTAL 2,336.89
668
TOTAL 2,360.26
Say 271.45
14.32 Providing and fixing bright finished brass double acting spring hinges with
necessary screws etc. complete :
14.32.3 100 mm
Materials-
Labour-
0114 Beldar Day 0.20 135.25 27.05
TOTAL 1,898.09
TOTAL 1,917.07
Say 220.45
14.33 : Providing and fixing bright finished brass flush bolts with necessary screws etc.
complete :
14.33.1: 250 mm
Materials-
0404 Brass flush bolt 250 mm ( each 10.0 84.00 840.00
Labour-
TOTAL 919.54
TOTAL 928.74
Say 106.80
14.33: Providing and fixing bright finished brass flush bolts with necessary screws etc.
complete :
14.33.2: 150 mm

Materials-
0405 Brass flush bolt 150 mm each 10.00 65.00 650.00
669

Labour-
TOTAL 724.09
TOTAL 731.33
15 %
Cost of 10 hinges 841.03
Say 84.10
14.33 : Providing and fixing bright finished brass flush bolts with necessary screws etc.
complete :
14.33.3: 100 mm
Materials-
0406 Brass flush bolt 100 mm each 10.00 44.00 440.00
Labour-
TOTAL 514.09
TOTAL 519.23
Cost of 10 hinges 597.11
Say 59.70
14.34 : Providing and fixing 150 mm bright finished floor brass door stopper with rubber
cushion, screws etc. to suit shutter thickness complete
Materials-
0417 Brass door stopper 150 mm each 10.0 104.00 1040.00
Labour-
9999 Sundries (wooden plugs including fixing in the L.S. 6.37 1.00 6.37
floor)
TOTAL 1,098.10
TOTAL 1,109.08
15%
Cost of 10 floor door stoppers 1,275.44
Cost of 1 floor door stopper 127.54
Say 127.55
670
14.35 : Providing and fixing bright finished brass hard drawn hooks and eyes :
14.35.1: 300 mm
Materials-
0418 Bright finished brass hooks & eyes 300 mm 10 Nos 10.00 457.00 457.00
Labour-
TOTAL 467.00
TOTAL 471.67
15%
Cost of 10 hooks and eyes 542.42
Cost of 1 hook and eye 54.24
Say 54.25
14.35.2 250 mm
Materials-
Labour-
TOTAL 433.00
TOTAL 437.33
15%
Say 50.30
14.35.3 : 200 mm
Materials-
Labour-
TOTAL 400.00
TOTAL 404.00
Say 46.45
671
14.35.4: 150 mm
Materials-
Labour-
TOTAL 374.00
TOTAL 377.74
15%
Say 43.45
14.35: Providing and fixing bright finished brass hard drawn hooks and eyes :
14.35.5: 100 mm
Materials-
Labour-
TOTAL 310.00
TOTAL 313.10
15%
Say 36.00
14.36 : Providing and fixing bright finished brass fan light pivot with necessary screws
etc. complete.
Materials-
0429 Brass fan light pivot 10 Nos 10.00 128.00 128.00
Labour-
TOTAL 179.43
TOTAL 181.22
Cost of 10 fanlight pivot 208.40
Cost of 1 fanlight pivot 20.84
Say 20.85
672
14.37 Providing and fixing 300 mm long bright finished brass chain with hook for fan
light including necessary screws etc. complete.
Materials-
0430 Brass chain with hook 300 mm long each 10.00 13.00 130.00
Labour-
TOTAL 176.46
TOTAL 178.22
Add for contractor’s profit and overheads @ 15% 26.73
Cost of 10 chain with hooks 204.95
Cost of 1 chain with hooks 20.50
Say 20.50
14.38 Providing and fixing bright finished brass quadrant stay 300mm long with
necessary screws etc. complete.
Materials-
0427 Brass quadrant stay 300 mm long each 10.00 73.00 730.00
9999 Carriage of material
Labour- L.S. 0.91 1.00 0.91
TOTAL 776.46
TOTAL 784.22
Cost of 10 quadrant stayes 901.85
Cost of 1 quadrant staye 90.19
Say 90.20
14.39 : Providing and fixing bright finished brass helical door spring (superior quality).
Materials-
0442 Helical door spring (superior quality) 150 mm each 10.00 185.00 1,850.00
Labour-
0114 Beldar Day 0.20 135.25 27.05
TOTAL 1,995.65
TOTAL 2,015.61
Cost of 10 door springs 2,317.95
Cost of 1 door spring 231.80
Say 231.80
673
14.40 Providing and fixing chromium plated brass butt hinges with necessary screws
etc. complete.
14.40.1 125x70x4 mm (ordinary type)
Materials-
0525 Brass butt hinges (chromium plated) 10 Nos 10.0 433.00 433.00
125x70x4 mm (ordinary type)
Labour-
0111 Carpenter 1 st class Day 0.14 151.50 21.21
0114 Beldar Day 0.10 135.25 13.52
TOTAL 594.37
TOTAL 600.31
Cost for 10 nos. 690.36
Cost of 1 no. 69.04
Say 69.05
14.40: Providing and fixing chromium plated brass butt hinges with necessary screws
etc. complete.
14.40.2 : 100x70x4 mm (ordinary type)
Materials-
100x70x4 mm (ordinary type)
Labour-
0114 Beldar Day 0.10 135.25 13.52
TOTAL 543.37
TOTAL 548.80
15%
Cost of 1 no. 63.11
Say 63.10
14.40: Providing and fixing chromium plated brass butt hinges with necessary screws
etc. complete.
14.40.3 : 75x65x4 mm (heavy type)
Materials-
0524 Brass butt hinges (chromium plated) 75x65x4 10 Nos 10.00 430.00 430.00
mm (heavy type)
Labour-
674

0114 Beldar Day 0.10 135.25 13.52
TOTAL 520.55
TOTAL 525.76
Cost of 1 no. 60.46
Say 60.45
14.40 : Providing and fixing chromium plated brass butt hinges with necessary screws
etc. complete.
14.40.4: 75x40x2.5 mm (ordinary type)
Materials-
75x40x2.5 mm (ordinary type)
Labour-
0114 Beldar Day 0.10 135.25 13.52
TOTAL 225.55
TOTAL 227.81
Add for contractor’s profit and overheads@ 34.17
15%
Cost of 1 no. 26.20
Say 26.20
14.40 : Providing and fixing chromium plated brass butt hinges with necessary screws
etc. complete.
14.40.5 : 50x40x2.5 mm (ordinary type)
Materials-
50x40x2.5 mm (ordinary type)
Labour-
TOTAL 143.23
TOTAL 144.66
Cost of 1 no. 16.64
Say 16.65
675
14.41 Providing and fixing 85x42mm chromium plated brass pull bolt lock with necessary
screws, nuts, bolts and washers etc. complete.
Details of cost for 10 nos
Materials-
2467 Chromium plated brass pull bolt lock each 10.0 130.00 1300.00
including bolts, nuts & washers
9999 Carriage of materials & sundries L.S 6.37 1.00 6.37
Labour-
TOTAL 1341.77
TOTAL 1355.19
15%
Cost of 10 nos. 1558.47
Cost of 1 no. 155.85
Say 155.85
14.42 : White washing with lime to give an even shade :

14.42.1: Old work (two or more coats)
Materials-
9999 Carriage of lime L.S. 0.52 1.00 0.52
Labour-
0141 White Washer Day 0.11 138.45 15.23
0115 Coolie Day 0.06 135.25 8.12
9999 Indigo gum etc L.S. 2.73 1.00 2.73
9999 Sundries ladders etc L.S. 2.73 1.00 2.73
TOTAL 35.23
TOTAL 35.58
Cost of 10.00 sqm 40.92
Say 4.10
14.42 : White washing with lime to give an even shade :

14.42.2 : Old work (one or more coats)

Materials-
9999 Carriage of lime L.S. 0.52 1.00 0.52
Labour-
0141 White Washer Day 0.07 138.45 9.69
0115 Coolie Day 0.03 135.25 4.06
9999 Indigo gum etc L.S. 2.08 1.00 2.08
9999 Sundries ladders etc L.S. 2.73 1.00 2.73
TOTAL 22.03
676

TOTAL 22.25
Cost of 10.00 sqm 25.59
Say 2.55
14.43 Removing white or colour wash by scrapping and sand papering and preparing
the surface smooth including necessary repairs to scratches etc. complete
Details of cost for 10 sqm.
Labour-
0114 Beldar Day 0.09 135.25 12.17
0115 Coolie Day 0.04 135.25 5.41
0101 Bhishti Day 0.04 138.45 5.54
9999 Sundries such as sand paper and scrapper L.S. 2.73 1.00 2.73
9999 Repair to scraches L.S. 1.82 1.00 1.82
TOTAL 27.67
TOTAL 27.95
Cost of 1 sqm. 3.21
Say 3.20
14.44: Distempering with dry distemper of approved brand and manufacture (one or more
coats) and of required shade on old work to give an even shade.
Materials-
9999 Carriage of distemper L.S. 0.91 1.00 0.91
9999 Brushes, sand-paper etc. L.S. 5.33 1.00 5.33
Labour-
0131 Painter Day 0.33 141.60 46.73
0115 Coolie Day 0.17 135.25 22.99
9999 Sundries L.S. 4.42 1.00 4.42
TOTAL 106.38
TOTAL 107.44
Say 12.35
14.45 Distempering with oil bound washable distemper of approved brand and
manufacture to give an even shade :
14.45.1: Old work (one or more coats)
Materials-
0816 Oil bound washable distemper kilogram 1.00 40.00 40.00
9999 Brushes, putty etc. L.S. 0.52 1.00 0.52
9999 Sundries including carriage L.S. 10.79 1.00 10.79
677
Labour-
0131 Painter Day 0.33 141.60 46.73
0115 Coolie Day 0.17 135.25 22.99
9999 Sundries L.S. 7.15 1.00 7.15
TOTAL 128.18
TOTAL 129.46
15%
Say 14.90
14.46 : Removing dry or oil bound distemper, water proofing cement paint and the like by
scrapping, sand papering and preparing the surface smooth including necessary
repairs to scratches etc. complete.
Labour-
0114 Beldar Day 0.11 135.25 14.88
0115 Coolie Day 0.05 135.25 6.76
0101 Bhishti Day 0.05 138.45 6.92
9999 Scrapper, sand paper etc. L.S. 6.24 1.00 6.24
9999 Sundries including mortar to repair the surface L.S. 1.82 1.00 1.82
TOTAL 36.62
TOTAL 36.99
Cost of 1 sqm. 4.25
Say 4.25
14.47 : Painting on G.S. sheet with synthetic enamel paint of approved brand and
manufacture of required colour to give an even shade :
Materials-
0845 Roofing paint litre 0.46 95.00 43.70
9999 Carriage L.S. 0.52 1.00 0.52
Labour-
0131 Painter Day 0.36 141.60 50.98
0115 Coolie Day 0.36 135.25 48.69
9999 Putty, brushes sand paper etc. L.S. 6.67 1.00 6.76
9999 Sundries L.S. 8.06 1.00 8.06
TOTAL 158.71
TOTAL 160.30
Say 18.45
678
14.48 : Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with
black anticorrosive bitumastic paint of approved brand and manufacture over and
including a priming coat of ready mixed zinc chromate yellow primer on new work :
14.48.1: 75 mm diameter pipes
Area=22/7 x0.0814 x30m =7.67sqm
MATERIALS
9999 Carriage L.S. 0.39 1.00 0.39
LABOUR
0131 Painter Day 0.18 141.60 25.49
0115 Coolie Day 0.18 135.25 24.34
MATERIALS
0828 Anticorrosive bituminous paint (black) Day 0.73 52.00 37.96
9999 Carriage Day 1.04 1.00 1.04
LABOUR
0131 Painter Day 0.41 141.60 58.06
0115 Coolie Day 0.41 135.25 55.45
9999 Putty, sand paper etc L.S. 4.16 1.00 4.16
9999 Sundries L.S. 6.24 1.00 6.24
9999 Wire brushes for cleaning L.S. 4.42 1.00 4.42
9999 Extra for delays L.S. 40.30 1.00 40.30
TOTAL 289.82
TOTAL 292.72
Say 11.20
14.49 : Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings
with black anticorrosive bitumastic paint of approved brand and manufacture on
old work :
Area=22/7 x0.0814x30m =7.67sqm
MATERIALS
9999 Carriage L.S. 0.39 1.00 0.39
LABOUR
0131 Painter Day 0.27 141.60 38.23
0115 Coolie Day 0.27 135.25 36.52
9999 Sundries L.S. 6.24 1.00 6.24
TOTAL 139.23
TOTAL 140.62
Say 5.40
679
14.50: Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings
with aluminium paint of approved brand and manufacture over a priming coat of
ready mixed zinc chromate yellow primer on new work :
14.50.1 : 75 mm diameter pipes
Area =22/7x0.0814x30=7.67sqm
MATERIALS
9999 Carriage L.S. 0.39 1.00 0.39
LABOUR
0131 Painter Day 0.18 141.60 25.49
0115 Coolie Day 0.18 135.25 24.34
9999 Sundries L.S. 8.19 1.00 8.19
MATERIALS
9999 Carriage L.S. 1.04 1.00 1.04
LABOUR
0131 Painter Day 0.41 141.60 58.06
0115 Coolie Day 0.41 135.25 55.45
9999 Sundries L.S. 5.20 1.00 5.20
TOTAL 314.34
TOTAL 317.48
Say 12.15
14.51 : Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings
with synthetic enamel paint of approved brand and manufacture and required
colour on old work :
Details of cost for 30 metres
Area = 22/7x81.4 mmx30 m = 7.67 sqm
Materials-
9999 Putty, sand paper etc. L.S. 0.39 1.00 0.39
9999 Carriage L.S. 2.08 1.00 2.08
LABOUR
1131 Painter Day 0.28 141.60 39.65
0115 Coolie Day 0.28 135.25 37.87
9999 Putty, sand paper brushes etc. L.S. 4.16 1.00 4.16
9999 Sundries L.S. 6.24 1.00 6.24
9999 Extra for delay L.S. 26.91 1.00 26.91
TOTAL 152.87
TOTAL 154.40
Cost of 30.00 m 177.56
Cost of 1.00 m 5.92
Say 5.90
680
14.51: Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings
Area = 22/7x106.4 mmx30 m = 10.032 sqm
Materials-
9999 Carriage L.S. 2.73 1.00 2.73
LABOUR
0131 Painter Day 0.36 141.60 50.98
0115 Coolie Day 0.36 135.25 48.69
9999 Sundries L.S. 8.06 1.00 8.06
TOTAL 196.64
TOTAL 198.61
Cost of 30m 228.40
Cost of 1.00 m 7.61
Say 7.60
14.51: Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings
Area = 22/7x157.2 mmx30 m = 14.82 sqm
Materials-
9999 Carriage L.S. 3.90 1.00 3.90
LABOUR
0131 Painter Day 0.53 141.60 75.05
0115 Coolie Day 0.53 135.25 71.68
9999 Sundries L.S. 11.96 1.00 11.96
TOTAL 279.14
TOTAL 281.93
Cost of 30.00 m 324.22
Cost of 1.00 m 10.81
Say 10.80
681
14.52 : Painting with oil type wood preservative of approved brand and manufacture
MATERIALS
LABOUR
0131 Painter Day 0.11 141.60 15.58
0115 Coolie Day 0.11 135.25 14.88
9999 Brushes etc L.S. 2.73 1.00 2.73
9999 Sundries L.S. 2.73 1.00 2.73
TOTAL 85.04
TOTAL 85.89
Add, 15 % for contractor’s profit and overheads 12.88
Cost of 10.00 sqm 98.77
Say 9.90
14.53 : Wall painting with plastic emulsion paint of approved brand and manufacture to
give an even shade
14.53.1: One or more coats on old work.
Details of cost for 10’sqm
MATERIALS
0835 Plastic emulsion paint litre 0.73 140.00 102.20
9999 Materials for filling in holes and cracks (putty L.S. 0.52 1.00 0.52
etc)
LABOUR
0131 Painter Day 0.36 141.60 50.98
0115 Coolie Day 0.36 135.25 48.69
9999 Sundries L.S. 6.76 1.00 6.76
TOTAL 222.54
TOTAL 224.77
Cost of 10.00 sqm 258.49
Say 25.85
14.54 : Painting with synthetic enamel paint of approved brand and manufacture of required
colour to give an even shade :
Materials-
0833 Enamel paint litre 0.70 115.00 80.50
9999 Carriage of paint and materials L.S. 0.52 1.00 0.52
LABOUR
0131 Painter Day 0.36 141.60 50.98
0115 Coolie Day 0.36 135.25 48.69
682

9999 Putty L.S. 2.73 1.00 2.73
9999 Brushes sand paper etc. L.S. 5.33 1.00 5.33
9999 Sundries L.S. 8.06 1.00 8.06
TOTAL 196.81
TOTAL 198.78
Cost of 10.00 sqm 228.60
Say 22.85
14.55 : Painting with aluminium paint of approved brand and manufacture to give an even shade
MATERIALS
9999 Carriage of paint and material L.S. 0.52 1.00 0.52
9999 Putty etc L.S. 2.73 1.00 2.73
LABOUR
0131 Painter Day 0.36 141.60 50.98
0115 Coolie Day 0.36 135.25 48.69
9999 Sundries L.S. 8.06 1.00 8.06
TOTAL 157.25
TOTAL 158.82
Cost of 10.00 sqm 182.64
Say 18.25
14.56 : Painting with acid proof paint of approved brand and manufacture of required
colour to give an even shade :
Detail of cost for 10.00 sqm
MATERIALS
0827 Acid proof paint litre 0.70 93.00 65.10
9999 Carriage of paint L.S. 0.52 1.00 0.52
9999 Putty etc L.S. 2.73 1.00 2.73
LABOUR
0131 Painter Day 0.36 141.60 50.98
0115 Coolie Day 0.36 135.25 48.69
9999 Sundries L.S. 8.06 1.00 8.06
TOTAL 181.41
TOTAL 183.22
Cost of 10.00 sqm 210.70
Say 21.05
683
14.57 : Painting with black anti-corrosive bitumastic paint of approved brand and
manufacture to give an even shade :
MATERIALS
0828 Black anticorrosive bitumastic paint litre 0.57 52.00 29.64
9999 Carriage L.S. 0.52 1.00 0.52
LABOUR
0131 Painter Day 0.36 141.60 50.98
0115 Coolie Day 0.36 135.25 48.69
9999 Putty, brushes, sand paper etc L.S. 5.33 1.00 5.33
9999 Sundries L.S. 8.06 1.00 8.06
TOTAL 143.22
TOTAL 144.65
Cost of 10.00 sqm 166.35
Say 16.65
14.58 : French spirit polishing:

Details of cost for 10 ‘sqm
Materials-
1000 Spirit litre 0.98 37.00 36.26
0999 Shellac kilogram 0.13 192.00 24.96
9999 Turpentine oil sand paper cotton/woolen cloth L.S. 10.79 1.00 10.79
putty etc.
9999 Linseed oil L.S. 0.52 1.00 0.52
LABOUR
0131 Painter Day 1.76 141.60 249.22
9999 Sundries L.S. 8.06 1.00 8.06
TOTAL 330.72
TOTAL 334.03
Cost of 10.00 sqm 384.13
Say 38.40
14.59 : Polishing on wood work with ready made wax polish of approved brand and
manufacture :
14.59.1: Old work
MATERIALS
0855 Ready made Wax polish kilogram 0.25 150.00 37.50
9999 Carriage L.S. 0.39 1.00 0.39
LABOUR
0131 Painter Day 0.40 141.60 56.64
0115 Coolie Day 0.40 135.25 54.10
684
9999 Soap, brushes, cloth etc L.S. 4.16 1.00 4.16

9999 Sundries L.S. 4.42 1.00 4.42
TOTAL 157.21
TOTAL 158.78
Cost of 10.00 sqm 182.60
Say 18.25
14.60 : Re-lettering with black Japan paint of approved brand and manufacture.
Detail of cost for 100 letters of 15 cm height
MATERIALS
0829 Paint (Black Japan) litre 0.37 65.00 24.05
9999 Carriage L.S. 0.52 1.00 0.52
LABOUR
0131 Painter Day 4.00 141.60 566.40
0115 Coolie Day 1.00 135.25 135.25
9999 Painting brushes, turpentine, stencil etc L.S. 7.15 1.00 7.15
9999 Sundires L.S. 8.06 1.00 8.06
TOTAL 741.43
TOTAL 748.84
Say 0.55
14.61 Painting (one or more coats) with black Japan paint of approved brand and
manufacture to give an even shade.
Materials-
0829 Black Japan Paint litre 0.70 65.00 45.50
9999 Carriage L.S. 0.52 1.00 0.52
9999 Putty etc. L.S. 2.73 1.00 2.73
LABOUR
0131 Painter Day 0.36 141.60 50.98
0115 Coolie Day 0.36 135.25 48.69
9999 Brushes, sand paper etc. L.S. 5.33 1.00 5.33
9999 Sundries L.S. 8.06 1.00 8.06
TOTAL 161.81
TOTAL 163.43
Cost of 10.00 sqm 187.94
Say 18.80
685
14.62 : Providing and fixing C.P. brass chain and rubber plug complete for sink or wash
basin :
14.62.1: 32mm dia
Detail of cost for one no.
Materials-
1314 C.P. brass chain with 32 mm dia rubber plug each 1 21.00 21.00
9999 Carriage of materials and fixing charges L.S. 8.06 1.00 8.06
TOTAL 29.06
TOTAL 29.35
15 %
Cost of one no. 33.75
Say 33.75
14.62 : Providing and fixing C.P. brass chain and rubber plug complete for sink or
wash basin :
14.62.2 40 mm dia
Detail of cost for one no.
Materials-
1315 C.P. brass chain with 40 mm dia rubber plug each 1 22.00 22.00
TOTAL 30.06
TOTAL 30.36
15%
Say 34.90
14.63 : Distempering with 1st quality acrylic washable distemper (ready made) of approved
manufacturer and of required shade and colour complete, as per manufacturer’s
specification.
MATERIALS
0816 Oil bound washable distemper kilogram 1 40.00 40.00
9999 Brushes, putty etc L.S. 0.52 1.00 0.52
9999 Sundries including carriage of material L.S. 10.76 1.00 10.76
LABOUR
0131 Painter Day 0.22 141.60 31.15
0114 Beldar Day 0.22 135.25 29.76
9999 Sundires L.S. 7.15 1.00 7.15
TOTAL 119.34
TOTAL 120.53
Cost of 10.00 sqm 138.61
Say 13.85
686
14.64 Finishing walls with water proofing cement paint of required shade :
14.64.1 Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer
applied @ 0.80 litrs/10 sqm complete including cost of Priming coat.
MATERIALS
8508 Primer for cement paint litre 0.80 52.00 41.60
LABOUR
0131 Painter Day 0.46 141.60 65.14
0115 Coolie Day 0.23 135.25 31.11
0101 Bhisti Day 0.05 138.45 6.92
9999 Sundries L.S. 8.06 1.00 8.06
TOTAL 240.74
TOTAL 243.15
Cost of 10.00 sqm 279.62
Say 27.95
14.65 : Finishing walls with textured exterior paint of required shade :

14.65.1 : Old work (Two or more coats on existing cement paint surface applied @ 3.28Itr/10 sqm.
Detail of cost for 10sqm
MATERIALS
LABOUR
0131 Painter Day 0.46 141.60 65.14
0115 Coolie Day 0.23 135.25 31.11
9999 Sundries L.S. 8.06 1.00 8.06
TOTAL 713.26
TOTAL 720.39
Cost of 10.00 sqm 828.45
Say 82.85
14.65 : Finishing walls with textured exterior paint of required shade :

14.65.2 : Old work (One or more coats) applied @ 1.82 ltr/10 sqm.
MATERIALS
LABOUR
0131 Painter Day 0.33 141.60 46.73
0115 Coolie Day 0.17 135.25 22.99
9999 Sundries L.S. 8.06 1.00 8.06
687

TOTAL 418.51
TOTAL 422.70
Cost’of 10.00 sqm 486.10
Say 48.60
14.66 : Finishing walls with Acrylic Smooth exterior paint of required shade :
14.66.1: Old work (Two or more coat applied @ 1.67 ltr/10 sqm) on existing cement paint
surface).
MATERIALS
LABOUR
0131 Painter Day 0.46 141.60 65.14
0 115 Coolie Day 0.23 135.25 31.11
9999 Sundries L.S. 5.33 1.00 5.33
TOTAL 312.71
TOTAL 315.84
Cost of 10.00 sqm 363.22
Say 36.30
14.66 : Finishing walls with Acrylic Smooth exterior paint of required shade :
14.66.2: Old work (One or more coat applied @ 0.90 ltr/10 sqm).
MATERIALS
LABOUR
0131 Painter Day 0.33 141.60 46.73
0115 Coolie Day 0.17 135.25 22.99
9999 Sundries L.S. 8.06 1.00 8.06
TOTAL 196.15
TOTAL 198.11
Cost of 10.00 sqm 227.83
Say 22.80
688
14.67 Finishing walls with Premium Acrylic Smooth exterior paint of required shade
14.67.1 Old work (Two or more coats applied @ 1.43 ltr/10sqm) over existing cement
paint surface.
MATERIALS
LABOUR
0131 Painter Day 0.46 141.60 65.14
0115 Coolie Day 0.23 135.25 31.11
9999 Sundries L.S. 8.06 1.00 8.06
TOTAL 401.36
TOTAL 405.37
Cost of 10.00 sqm 466.18
Say 46.60
14.67 : Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives
of required shade
14.67.2: Old work (one or more coats applied @ 0.83 ltr/10 sqm).
MATERIALS
LABOUR
0131 Painter Day 0.33 141.60 46.73
0115 Coolie Day 0.17 135.25 22.99
9999 Sundries L.S. 8.06 1.00 8.06
TOTAL 253.50
TOTAL 256.04
Cost of 10.00 sqm 294.45
Say 29.45
14.68 Painting (one or more coats) on rain water, soil, waste and vent pipes and
fittings with black anticorrosive bitumastic paint of approved brand and manufacture
on old work :
Detail of cost for 30 metre
Area=22/7 x 106.4mm x30m =10.032sqm
MATERIALS
9999 Carriage L.S. 0.52 1.00 0.52
LABOUR
0131 Painter Day 0.36 141.60 50.98
0115 Coolie Day 0.36 135.25 48.69
689

9999 Sundries L.S. 8.06 1.00 8.06
TOTAL 182.61
TOTAL 184.44
Say 7.05
14.68: Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with
black anticorrosive bitumastic paint of approved brand and manufacture on old work :
Details of cost for 30 mtrs
Area=22/7 x106.4mm x30m =10.032sqm
MATERIALS
9999 Carriage L.S. 0.65 1.00 0.65
LABOUR
0131 Painter Day 0.53 141.60 75.05
0115 Coolie Day 0.53 135.25 71.68
9999 Sundries L.S. 11.96 1.00 11.96
TOTAL 259.05
TOTAL 261.64
Say 10.05
14.69 : Varnishing with varnish of approved brand and manufacture:

14.69.1: One or more coats with copal varnish.
MATERIALS
0857 Superior copal varnish litre 0.70 100.00 70.00
9999 Carriage L.S. 0.52 1.00 0.52
9999 Repair to the surface L.S. 2.73 1.00 2.73
LABOUR
0131 Painter Day 0.36 141.60 50.98
0115 Coolie Day 0.36 135.25 48.69
9999 Brushes, sand L.S. 5.33 1.00 5.33
9999 Sundries L.S. 2.73 1.00 2.73
TOTAL 180.98
Add 15% ofor contractor’s profit and overheads 182.79
TOTAL 27.42
Cost of 10.00 sqm 210.21
Say 21.00
690
14.69 : Varnishing with varnish of approved brand and manufacture:
14.69.2 : One or more coats with spar varnish.
MATERIALS
0858 Superior spar varnish litre 0.75 105.00 78.75
9999 Carriage L.S. 0.52 1.00 0.52
9999 Repair etc L.S. 2.73 1.00 2.73
LABOUR
0131 Painter Day 0.36 141.60 50.98
0114 Coolie Day 0.36 135.25 48.69
9999 Sundries L.S. 4.16 1.00 4.16
TOTAL 188.56
TOTAL 190.45
Cost of 10.00 sqm 219.02
Say 21.90
14.70 Melamine polishing on wood work (one or more coats)
Details of cost for 10sqm

MATERIALS
7241 Melamine polish litre 0.65 228.00 148.20
0006 Hire charges of Spraying machine including Day 0.78 173.00 134.94
electric charges
9999 Carriage charge of Machine & Marerial L.S. 4.42 1.00 4.42
LABOUR
0131 Painter Day 0.35 141.60 49.56
0115 Beldar Day 0.35 135.25 47.34
9999 Sundries L.S. 4.42 1.00 4.42
TOTAL 388.88
TOTAL 392.77
Cost of 10.00 sqm 451.69
Say 45.15
14.71 Varnishing with flatting varnish of approved brand and manufacture one or more
coats on old work.
MATERIALS
0856 Flatting varnish litre 0.70 49.00 34.30
9999 Glue, putty etc L.S. 2.73 1.00 2.73
9999 Carriage L.S. 1.82 1.00 1.82
9999 Painting brushes, turpentine, stencil etc L.S. 24.18 1.00 24.18
LABOUR
0131 Painter Day 0.36 141.60 50.98
0115 Coolie Day 0.36 135.25 48.69
691

TOTAL 162.70
TOTAL 164.33
Cost of 10.00 sqm 188.98
Say 18.90
14.72 : Providing and fixing double scaffolding system (cup lock type) on the exterior side,
upto seven story height made with 40mm dia. M.S. tube 1.5 m centre to centre horizontal
& vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies,
M.S. clamps and M.S. staircase system in the scaffolding for working platform etc.
and maintaining it in a serviceable condition for the required duration as approved
and removing it there after .The scaffolding system shall be stiffened with bracings,
runners, connection with the building etc wherever required for inspection of work at
required locations with essential safety features for the workmen etc. complete as per
directions and approval of Engineer-in-charge .The elevational area of the scaffolding
shall be measured for payment purpose .The payment will be made once irrespective
of duration of scaffolding. (To be used for maintenance work judicially . necessary
deduction for scaffolding in the existing item to be done.)
M.S. tube 50x25x1-8mm
4x3 mtr =12.00 m
12x0.9= 10.80 m
TOTAL = 22.8m
Add 10% wastage = 2.28m
TOTAL = 25.08 metre
4009 25.O8m @ 2.83kg/m = 70.98kg kilogram 70.98 38.00 2697.24
Angle iron 50x50x6mm
(16x0.60)x (16x0.15)
9.60x2.40= 12.00m
10%wastage= 1.20
TOTAL = 13.20m @ 3.50kg/m = 46.20kg i.e.
0.462 quintal
1007 cost of angle iron quintal 0.462 3100.00 1432.20
Stainless steel pin .
7340 24nos. @ 0.107 kg/each= 2.568 kg kg 2.568 130.00 333.84
Cement concerete 1:2:4 =
16x0.15x0.15x0.15= 0.054 cum
(A) (Rate as per item no 4.1.3 of SH : Concrete cum 0.054 3257.45 175.90(A)
Work)
Making holes in brick work
0114 Beldar Day 1.45 135.25 196.11
welding for frame welding
16x(2.5+5+2.5+5) = 240cm
For hold fast 16x20cm = 320cm
For fixing stainless steel pins
24x(5+5+2.5) = 300cm
24x5 =120cm
TOTAL = 980cm
1215 Welding by electric plant cm 980 1.00 980.00
692

LABOUR
0100 Bandhani Day 0.67 138.45 92.76
6114 Beldar Day 4.92 135.25 665.43
9999 Sundries L.S. 80.73 1.00 80.73
0999 Painting with epoxy paint over and including
priming coat
Area 22.80x 0.15= 3.42 sqm
12x0.2 = 2.40
Total = 5.82 sqm
(A) Rate as per Item no. 13.52.1 of S.H. sqm 5.82 75.25 437.96(A)
Finishing.
9999 For labour for scaffolding L.S. 299.00 1.00 299.00
TOTAL 7667.46
Add 1 % for water charges except on (A) 70.54
TOTAL 7738.00
except on (A)
Cost for 106.52 kg 8806.62
Cost for 1 kg 82.68
Say 82.70
693
SUB HEAD : 15.0

DISMANTLING
AND
DEMOLISHING
695
15.1 Demolishing lime concrete manually/ by mechanical means and disposal of material
within 50 metres lead as per direction of Engineer in charge.

Detail of cost for 1 cum
LABOUR
0114 Beldar Day 0.44 135.25 59.51
0115 Coolie Day 0.37 135.25 50.04
9999 Sundries L.S 1.04 1.00 1.04
TOTAL 110.59
TOTAL. 111.70
Cost of 1.00 cum 128.46
Say 128.45
15.2 Demolishing cement concrete manually/ by mechanical means including disposal

of material within 50 metres lead as per direction of Engineer in charge.
15.2.1 1:3:6 or richer mix

LABOUR
0114 Beldar Day 1.59 135.25 215.05
0115 Coolie Day 0.72 135.25 97.38
9999 Sundries L.S 4.81 1.00 4.81
TOTAL 317.24
TOTAL. 320.41
Cost of 1.00 cum 368.47
Say 368.45
15.2 Demolishing cement concrete manually/ by mechanical means including disposal

of material within 50 metres lead as per direction of Engineer in charge.
15.2.2 1:4:8 or leaner mix

LABOUR
0114 Beldar Day 0.88 135.25 119.02
0115 Coolie Day 0.55 135.25 74.39
9999 Sundries L.S 1.95 1.00 1.95
TOTAL 195.36
TOTAL. 197.31
Cost of 1.00 cum 226.91
Say 226.90
696
15.3 Demolishing R.C.C. work, including stacking of steel bars and disposal of
unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

LABOUR
0114 Beldar Day 2.65 135.25 358.41
0115 Coolie Day 0.72 135.25 97.38
9999 Sundries L.S 7.02 1.00 7.02
TOTAL 4.62.81
TOTAL. 467.44
Cost of 1.00 cum 537.56
Say 537.55
15.4 Demolishing R.B. work manually / by mechanical means including stacking of steel
bars and disposal of unserviceable material within 50 metres lead as per direction of
Engineer - in- charge.

LABOUR
0114 Beldar Day 2.12 135.25 286.73
0115 Coolie Day 0.90 135.25 121.72
9999 Sundries L.S 4.68 1.00 4.68
TOTAL 413.13
TOTAL. 417.26
Cost of 1.00 cum 479.85
Say 479.85
15.5 Extra for cutting reinforcement bars manually / by mechanical means in R.C.C. or
R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B.
work) as per direction of Engineer - in -charge.

R.C.C. or R.B. workReinforced area
considering 1% reinforcement = 0.01 sqm
LABOUR
For cutting 0.01 sqm reinforcement
0114 Beldar Day 0.50 135.25 67.62
9999 Sundries L.S 13.39 1.00 13.39
TOTAL 151.81
TOTAL 153.33
Cost of 1.00 sqm of sectional area of R.C.C 176.33
or R.B. work
Say 176.35
697
15.6 Extra for scrapping, cleaning and straightening reinforcement from R.C.C. or R.B.
work

Detail of cost for 10 Nos
6 metres long 16 mm dia bars @ 1.58
kg/metre
Total weight = 94.80 kg = 0.948 quintal
LABOUR
0114 Beldar Day 0.5 135.25 67.62
9999 Sundries L.S 13.39 1.00 13.39
TOTAL 116.41
TOTAL 117.57
Cost of 94.80 Kg. 135.21
Cost of 1 Kg. 1.43
Say 1.45
15.7 Demolishing brick work, manually/ by mechanical means including stacking of

serviceable material and disposal of unserviceable materialwithin 50 metres lead
as per direction of Engineer-in-charge.
15.7.1 In mud mortar

LABOUR
0114 Beldar Day 0.30 135.25 40.57
0115 Coolie Day 0.37 135.25 50.04
9999 Sundries L.S 1.04 1.00 1.04
TOTAL 91.65
TOTAL 92.57
Cost of 1.00 cum 106.46
Say 106.45
15.7. Demolishing brick work manually/ by mechanical means including stacking of

serviceable material and disposal of unserviceable materialwithin 50 metres lead as
per direction of Engineer-in-charge.
15.7.2 In lime mortar with old mughal bricks.

LABOUR
0114 Beldar Day 1.24 135.25 167.71
0115 Coolie Day 0.46 135.25 62.22
9999 Sundries L.S 1.04 1.00 1.04
TOTAL 230.97
TOTAL 233.28
Cost of 1.00 cum 268.27
Say 268.25
698
15.7 Demolishing brick work manually/by machanical means including stacking of
serviceable material and disposal of unserviceable materialwithin 50 metres lead as
per direction of Engineer-in-charge.
15.7.3 In lime mortar

LABOUR
0114 Beldar Day 0.44 135.25 59.51
0115 Coolie Day 0.37 135.25 50.04
9999 Sundries L.S 1.04 1.00 1.04
TOTAL 110.59
TOTAL 111.70
Cost of 1.00 cum 128.46
Say 128.45
15.7 Demolishing brick work manually/by machanical means including stacking of

serviceable material and disposal of unserviceable material within 50 metres lead
as per direction of Engineer-in-charge.
15.7.4 In Cement mortar

LABOUR
0114 Beldar Day 1.06 135.25 143.36
0115 Coolie Day 0.90 135.25 121.72
9999 Sundries L.S 2.47 1.00 2.47
TOTAL 267.55
TOTAL- 270.23
Cost of 1.00 cum 310.76
Say 310.75
15.8 Removing mortar from bricks and cleaning bricks including stacking within a lead
of 50 m (stacks of cleaned bricks shall be measured):
15.8.1 From brick work in mud mortar

Detail of cost for 1000 Nos.
LABOUR
0114 Beldar Day 2.40 135.25 324.60
0115 Coolie Day 1.60 135.25 216.40
9999 Sundries L.S 1.82 1.00 1.82
TOTAL 599.46
TOTAL 605.45
Cost of 1000 Nos 696.27
Say 696.25
699
15.8.2 From brick work in lime mortar

LABOUR
0114 Beldar Day 2.80 135.25 378.70
0115 Coolie Day 1.40 135.25
9999 Sundries L.S 8.97 1.00 8.97
TOTAL 690.30
TOTAL 697.20
Cost of 1000 Nos 801.78
Say 801.80
15.8.3 From brick work in cement mortar

LABOUR
0114 Beldar Day 3.50 135.25 473.38
0115 Coolie Day 1.50 135.25 202.88
9999 Sundries L.S 8.06 1.00 8.06
TOTAL 859.90
TOTAL 868.50
Cost of 1000 Nos 998.78
Say 998.80
15.9 Demolishing stone rubble masonry manually/by machanical means including

stacking of serviceable material and disposal of unserviceable material within 50
metres lead as per directionof Engineer-in-charge:

Detail of cost for 1.00 cum
LABOUR
0114 Beldar Day 0.61 135.25 82.50
0115 Coolie Day 0.49 135.25 66.27
9999 Sundries L.S 1.95 1.00 1.95
TOTAL 150.72
TOTAL 152.23
Cost of 1.00 cum 175.06
Say 175.05
700
15.9 Demolishing stone rubble masonry manually/by machanical means including
metres lead as per directionof Engineer-in-charge:
15.9.2 In cement mortar

Detail of cost for 1.00 cum
LABOUR
0114 Beldar Day 1.30 135.25 175.82
0115 Coolie Day 1.04 135.25 140.66
9999 Sundries L.S 2.73 1.00 2.73
TOTAL 319.21
TOTAL 322.40
Cost of 1.00 cum 370.76
Say 370.75
15.10 Dismantling dressed stone work ashlar face stone work, marble work or precast
concrete work manually/by machanical means including stacking of serviceable
and disposal of unserviceable material within 50 metres lead as per direction of
Engineer-in-charge:

LABOUR
0114 Beldar Day 0.78 135.25 105.50
0115 Coolie Day 0.61 135.25 82.50
9999 Sundries L.S 2.73 1.00 2.73
TOTAL 190.73
TOTAL 192.64
Cost of 1.00 cum. 221.54
Say 221.55
15.10 Dismantling dressed stone work ashlar face stone work, marble work or precast
concrete work manually/by machanical means incluaingstacking of serviceable
and disposal of unserviceable material within 50* metres lead as per
direction of Engineer-in-charge:

LABOUR
0114 Beldar Day 1.55 135.25 209.64
0115 Coolie Day 1.19 135.25 160.95
9999 Sundries L.S 2.73 1.00 2.73
TOTAL 373.32
TOTAL 377.05
Cost of 1.00 cum. 433.61
Say 433.60
701
15.11 Removing mortar from and cleaning stones and concrete articles (net quantity of
stacks of cleaned material will be measured):

LABOUR
0114 Beldar Day 0.20 135.25 27.05
0115 Coolie Day 0.20 135.25 27.05
9999 Sundries L.S 0.52 1.00 0.52
TOTAL 61.70
TOTAL 62.32
Cost of 1.00 cum 71.67
Say 71.65
15.11 Removing mortar from and cleaning stones and concrete articles (net quantity of
stacks of cleaned material will be measured):

LABOUR
0114 Beldar Day 0.40 135.25 54.10
0115 Coolie Day 0.20 135.25 27.05
9999 Sundries L.S 0.91 1.00 0.91
TOTAL 89.14
TOTAL 90.03
Cost of 1.00 cum 103.53
Say 103.55
15.12 Dismantling doors, windows and clerestory windows (steel or wood) shutter
including chowkhats, architrave, holdfasts etc. complete and stacking within 50
metres lead :
15.12.1 Of area 3 sq. metres and below

Detail of cost for each
LABOUR
0114 Beldar Day 0.18 135.25 24.34
9999 Sundries L.S 1.43 1.00 1.43
TOTAL 47.01
TOTAL 47.48
Cost of each 54.60
Say 54.60
702
15.12 Dismantling doors, windows and clerestory windows (steel or wood) shutter including
chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead
15.12.2 Of area beyond 3.00 sqm

0124 Mason (brick layer) 2nd class Day 0.13 141.60 18.41
0114 Beldar Day 0.25 135.25 33.81
9999 Sundries L.S 2.73 1.00 2.73
TOTAL 64.86
TOTAL 65.51
Cost of each 75.34
Say 75.35
15.13 Taking out doors, windows and clerestory window shutters (steel or wood) including
stacking within 50 metres lead:
15.13.1 Of area 3 sq. metre and below

LABOUR
0114 Beldar Day 0.08 135.25 10.82
9999 Sundries L.S 0.52 1.00 0.52
TOTAL 18.42
TOTAL 18.60
Cost of each 21.39
Say 21.40
15.13 Taking out doors, windows and clerestory window shutters (steel or wood) including
stacking within 50 metres lead:
15.13.2 Of area beyond 3.00 sqm

LABOUR
0114 Beldar Day 0.10 135.25 13.52
9999 Sundries L.S 0.91 1.00 0.91
TOTAL 24.34
TOTAL 24.58
Cost of each 28.27
Say 28.25
703
15.14 Dismantling wood work in frames, trusses, purlins and rafters upto 10 metres span
and 5 metres height including stacking the material within 50 metres lead:
15.14.1 Of sectional area 40 square centimetres and above.

LABOUR
0114 Beldar Day 2.00 135.25 270.50
9999 Sundries L.S 13.39 1.00 13.39
TOTAL 567.09
TOTAL 572.76
Add 15% for contractor’s profit and overhead 85.91
Cost of 1.00 cum 658.67
Say 658.65
15.14 Dismantling wood work in frames, trusses, purlins and rafters upto 10 metres span
and 5 metres height including stacking the material within 50 metres lead:
15.14.2 Of sectional area below 40 square centimetres.

Detail of cost for 10.00 m.
LABOUR
0114 Beldar Day 0.08 135.25 10.82
9999 Sundries L.S 0.52 1.00 0.52
TOTAL 22.67
TOTAL 22.90
Cost of 1.00 m. 2.63
Say 2.65
15.15 Extra for dismantling trusses, rafters, purlins etc. of wood work for every additional
span of one metre or part thereof beyond 10 metres:

Detail of cost for 1 cum for every additional
span of 1 metre
LABOUR
0114 Beldar Day 0.30 135.25 40.57
9999 Sundries L.S 13.39 1.00 13.39
TOTAL 82.28
TOTAL 83.10
Cost of 1.00 cum / m span 95.56
Say 95.55
704
span of one metre or partlhereof beyond 10 metres :

Detail of cost for 10.00 metre for every additional
span of 1 metre
LABOUR
0114 Beldar Day 0.008 135.25 1.08
9999 Sundries L.S 0.39 1.00 0.39
TOTAL 2.32
TOTAL 2.34
Cost of 10.00 metre / m span 2.69
Cost of 1.00 metre/ m span 0.27
say 0.25
height of one metre or part thereof beyond 5 metres:

Detail of cost for 1 cum for every additional
height of 1 metre
LABOUR
0114 Beldar Day 0.50 135.25 67.62
9999 Sundries L.S 13.39 1.00 13.39
TOTAL 116.41
TOTOL 117.57
Ada 15% for contractor’s profit and overheads 17.64
Cost of 1.00 cum / m height 135.21
Say 135.20
height of one metre, or part thereof beyond 5 metres:

Detail of cost for 10.00 metre for every additional
height of 1 metre
0103 LABOURBlacksmith 2nd class Day 0.01 141.60 1.42
0114 Beldar Day 0.02 135.25 2.70
9999 Sundries L.S 0.39 1.00 0.39
TOTAL 4.51
TOTOL 4.56
Cost of 10.00 metre/ m height 5.24
Cost of 1.00 metre/m height 0.52
Say 0.50
705
15.17 Dismantling steel work in single sections including dismembering and stacking
within 50 metres lead in:
15.17.1 R.S. Joists

Detail of cost for 1 quintal
LABOUR
0100 Bandhani Day o.10 138.45 13.84
0114 Beldar Day 0.15 135.25 20.29
9999 Sundries L.S 2.73 1.00 2.73
TOTAL 43.94
TOTAL 44.38
Cost of 1.00 quintal 51.04
Say 0.50
15.17 Dismantling steel work in single sections including dismembering and stacking
within 50 metres lead in:
15.17.2 Channels, angles, tees and flats

LABOUR
0100 Bandhani Day 0.06 138.45 6.92
0114 Beldar Day 0.10 135.25 13.52
9999 Sundries L.S 2.73 1.00 2.73
TOTAL 30.25
TOTAL 30.55
Say 0.35
15.18 Dismantling steel work in built up sections in angles, tees, flats and channels
including all gusset plates, bolts, nuts, cutting rivets, welding etc. including
dismembering and stacking within 50metres lead.

LABOUR
0100 Bandhani Day 0.10 138.45 13.84
0114 Beldar Day 0.25 135.25 33.81
9999 Sundries L.S 4.16 1.00 4.16
TOTAL 73.05
TOTAL 73.78
Say 0.85
706
15.19: Dismantling steel work manually/by mechanical means in built up sections without
dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge.
LABOUR
0100 Bandhani Day 0.10 138.45 13.84
0114 Beldar Day 0.25 135.25 33.81
9999 Sundries L.S 2.73 1.00 2.73
TOTAL 50.38
TOTAL 50.88
Say 0.60
15.20: Extra for dismantling trusses, rafters, purlins etc. of steel work for every additional
span of one metre or part thereof beyond 10 metres
Detail of cost for 1 quintal for every additional
span of 1 metre beyond 10 metre
LABOUR
0100 Bandhani Day 0.02 138.45 2.77
0114 Beldar Day 0.06 135.25 8.12
9999 Sundries L.S 0.39 1.00 0.39
TOTAL 11.28
TOTAL 11.39
Cost of 1.00 quintal / m span 13.10
Cost of 1.00 kg /m span 0.13
Say 0.15
15.21: Extra for dismantling trusses, rafters, purlins etc. of steel work for every additional
height of one metre or part thereof beyond 5 metres.
Detail of cost for 1 quintal for every additional
height of 1 metre beyond 5 metre
LABOUR
0100 Bandhani Day 0.02 138.45 2.77
0114 Beldar Day 0.06 135.25 8.12
9999 Sundries L.S 0.39 1.00 0.39
TOTAL 11.28
TOTAL 11.39
Cost of 1.00 quintal / m height 13.10
Cost of 1.00 kg /m height 0.13
Say 0.15
707
15.22: Extra for marking of structural steel work required to be re-erected.
LABOUR
0130 Mistry Day 0.20 151.50 30.30
0114 Beldar Day 0.20 135.25 27.05
TOTAL 57.35
TOTAL 57.92
Say 0.65
15.23 : Dismantling tile work in floors and roofs laid in cement mortar including stacking
material within 50 metre lead.
15.23.1: For thickness of tiles above 10 mm and upto 25 mm
LABOUR
0114 Beldar Day 0.30 135.25 16-23
0115 Coolie Day 0.24 135.25 32.46
9999 Sundries L.S 2.73 1.00 2.73
TOTAL 93.90
TOTAL 94.84
Cost of 10.00 sqm 109.07
Say 10.90
15.23: Dismantling tile work in floors and roofs laid in cement mortar including stacking
material within 50 metre lead.
15.23.2: For thickness of tiles above 25 mm and upto 40 mm
LABOUR
0124 Mason (brick layer) 2nd class Day 0.59 141.60 83.54
0114 Beldar Day 0.18 135.25 24.34
0115 Coolie Day 0.24 135.25 32.46
9999 Sundries L.S 2.73 1.00 2.73
TOTAL 143.07
TOTAL 144.50
Cost of 10.00 sqm 166.18
Say 16.60
708
15.24 : Demolishing dry brick pitching in floors, drains etc. including stacking serviceable
material and disposal of unserviceable material within 50 metres lead :
LABOUR
0114 Beldar Day 0.25 135.25 33.81
0115 Coolie Day 1.00 135.25 135.25
9999 Sundries L.S 2.73 1.00 2.73
TOTAL 171.79
TOTAL 173.51
Cost of 1.00 cum 199.54
Say 199.55
15.25: Dismantling stone slab flooring laid in cement mortar including stacking of
serviceable material and disposal of unserviceable material within 50 metres lead.
Detail of cost for 10 sqm.
LABOUR
0114 Beldar Day 1.77 135.25 239.39
0115 Coolie Day 0.75 135.25 101.44
9999 Sundries L.S 8.06 1.00 8.06
TOTAL 348.89
TOTAL 352.38
Cost of 10.00 sqm. 405.24
Say 40.50
15.26 : Demolishing brick tile covering in terracing including stacking of serviceable material
and disposal of unserviceable material within 50 metres lead.
LABOUR
0114 Beldar Day 0.16 135.25 21.64
0115 Coolie Day 0.24 135.25 32.46
9999 Sundries L.S 2.47 1.00 2.47
TOTAL 133.03
TOTAL 134.36
Cost of 10.00 sqm 154.51
Say 15.45
709
15.27: Demolishing mud phaska in terracing and disposal ofmaterial within 50 metres lead.
LABOUR
0114 Beldar Day 0.25 135.25 33.81
0115 Coolie Day 0.62 135.25 83.86
9999 Sundries L.S 1.04 1.00 1.04
TOTAL 118.71
TOTAL 119.90
Cost of 1.00 cum 137.88
Say 137.90
15.28 : Dismantling roofing including ridges, hips valleys and gutters etc., and stacking
the material within 50 metres lead of:
15.28.1 : G.S. Sheet
LABOUR
0114 Beldar Day 1.00 135.25 135.25
9999 Sundries L.S 6.76 1.00 6.76
TOTAL 212.81
TOTAL 214.94
Cost of 10.00 sqm 247.18
Say 24.70
15.28 : Dismantling roofing including ridges, hips valleys and gutters etc., and stacking
the material within 50 metres lead of:
15.28.2: Asbestos Sheet
LABOUR
0114 Beldar Day 0.50 135.25 67.62
9999 Sundries L.S 5.33 1.00 5.33
TOTAL 101.27
TOTAL 102.28
Cost of 10.00 sqm 117.62
Say 11.75
710
15.29 : Dismantling stone slab roofing over wooden karries or R.C.C. battens (dismantling
karries and battens to be paid for separately) including stacking of serviceable
material and disposal of unserviceable material within 50 metres lead.
LABOUR
0114 Beldar Day 1.77 135.25 239.39
0115 coolie Day 0.75 135.25 101.44
9999 Sundries L.S. 8.06 1.00 8 06
TOTAL
TOTAL 3.49
Cost of 10.00 sqm 52.86
Cost of 1.00 sqm 405.24
Say 405.25
15.30 : Dismantling jack arch roofing and floors including stacking of serviceable material
and disposal of unserviceable material within 50 metres lead.
LABOUR
0114 Beldar Day 1.19 135.25 160.95
0115 Coolie Day 1.21 135.25 163.65
9999 Sundries L.S 8.06 1.00 8.06
TOTAL 332.66
TOTAL 335.99
Cost of 10.00 sqm 386.39
Say 38.65
15.31: Dismantling tiled roofing with battens boarding etc. complete including stacking of
serviceable material and disposal of unserviceable material within 50 metres lead.
LABOUR
0114 Beldar Day 1.73 135.25 233.98
0115 Coolie Day 0.25 135.25 33.81
9999 Sundries L.S 8.06 1.00 8.06
TOTAL 275.85
TOTAL 278.61
Cost of 10.00 sqm 320.40
Say 32.05
711
15.32 : Demolishing thatch roofing including mats, bamboo, jaffari etc. complete including
metres lead.
LABOUR
0114 Beldar Day 0.54 135.25 73.04
9999 Sundries L.S 3.64 1.00 3.64
TOTAL 76.68
TOTAL 77.45
Cost of 10.00 sqm 89.07
Say 8.90
15.33: Dismantling wooden bailies in posts and struts including stacking within 50 metres
lead.
LABOUR
0114 Beldar Day 0.50 135.25 67.62
0115 Coolie Day 0.50 135.25 67.62
9999 Sundries L.S 0.52 1.00 0.52
TOTAL 135.76
TOTAL 137.12
Cost of 50 m. 157.69
Cost of 1.00 m 3.15
Say 3.15
15.34 : Dismantling and stacking within 50 metres lead, fencing posts or struts including
all earth work and dismantling of concrete etc. in base of:
15.34.1: ‘T’ or ‘L’ iron or pipe.
LABOUR
0114 Beldar Day 0.107 135.25 14.47
0115 Coolie Day 0.067 135.25 9.06
9999 Excavation, transporting and stacking the L.S 0.26 1.00 0.26
posts to the required place within 50 metre
lead, refilling the pit and dressing the same
9999 Extra for lifting of R.C.C. posts being heavier L.S 13.39 1.00 13.39
than L iron and cleaning the posts of stacking
concrete
9999 Sundries L.S 1.43 1.00 1.43
TOTAL 38.61
TOTAL- 39.00
Cost of each 44.85
Say 44.85
712
15.34: Dismantling and stacking within 50 metres lead, fencing posts or struts including
all earth work and dismantling of concrete etc. in base of:
15.34.2: R.C.C
LABOUR
0114 Beldar Day 0.097 135.25 13.12
0115 Coolie Day 0.06 135.25 8.12
9999 Sundries L.S 0.10 2.60 0.26
9999 Excavation, transporting and stacking the L.S 13.39 1.00 13.39
posts to the required place within 50 metre-s
lead, refilling the pit and dressing the same
9999 Extra for lifting of R.C.C. posts being heavier L.S 8.06 1.00 8.06
than L iron and cleaning the posts of stacking
concrete
9999 Sundries L.S 2.73 1.00 2.73
TOTAL 45.68
TOTAL 46.14
Cost of each 53.06
Say 53.05
15.35 : Cutting bailies or wooden posts of fencing at the point of projection above the
concrete or ground and stacking the same within 50 metres lead.
Detail of cost for 1ballie (post)
9999 Cutting L.S 2.73 1.00 2.73
9999 Transporting and stacking L.S 1.43 1.00 1.43
TOTAL 4.16
TOTAL. 4.20
Cost of each 4.83
Say 4.85
15.36 : Dismantling barbed wire or flexible wire rope in fencing including making rolls and
stacking within 50 metres lead.
LABOUR
0114 Beldar Day 3.50 135.25 473.38
9999 Sundries L.S 5.33 1.00 5.33
TOTAL 478.71
TOTAL 483.50
Cost of 1quintal 556 03
Say 5.55
713
15.37 : Dismantling wooden trellis work excluding frames but including stacking the
serviceable material within 50 metres lead.
LABOUR
0124 Mason 2nd class Day 0.10 1,41.60 14.16
0114 Beldar Day 0.25 135.25 33.81
0115 Coolie Day 0.25 135.25 33.81
9999 Sundries L.S 2.73 1.00 2.73
TOTAL 84.51
TOTAL 85.36
Cost of 10.00 sqm 98.16
Say 9.80
15.38 : Dismantling expanded metal or I.R.C. fabrics with necessary battens and beading
including stacking the serviceable material within 50 metres lead.
LABOUR
0114 Beldar Day 0.40 135.25 54.10
0115 Coolie Day 0.20 135.25 27.05
9999 Sundries L.S 4.16 1.00 4.16
TOTAL 99.47
TOTAL 100.46
Cost of 10.00 sqm 115.53
Say 11.55
15.39 : Dismantling wooden boardings in lining of walls and partitions, excluding

supporting members but includmg stacking within 50 metres lead :
15.39.1: Upto 10mm thick
LABOUR
0114 Beldar Day 0.20 135.25 27.05
0115 Coolie Day 0.20 135.25 27.05
9999 Sundries L.S 5.33 1.00 5.33
TOTAL 80.67
TOTAL 81.48
Cost of 10.00 sqm tar 93.70
Say 9.35
714
15.39: Dismantling wooden boardings in lining of walls and partitions, excluding supporting
members but includmg stacking within 50 metres lead :
15.39.2 Thickness above 10 mm upto 25 mm
LABOUR
0114 Beldar Day 0.25 135.25 33.81
0115 Coolie Day 0.25 135.25 33.81
9999 Sundries L.S 6.76 1.00 6.76
TOTAL 102.70
TOTAL 103.73
Cost of 10.00 sqm 119.29
Say 11.95
15.39: Dismantling wooden boardings in lining of walls and partitions, excluding

supporting members but includmg stacking within 50 metres lead :
LABOUR
0114 Beldar Day 0.30 135.25 40.57
0115 Coolie Day 0.30 135.25 40.57
9999 Sundries L.S 13.39 1.00 13.39
TOTAL 122.85
TOTAL 124.08
Cost of 10.00 sqm 142.69
Say 14.25
15.40: Dismantling precast conerete or stone slab in walls, partition walls etc, including
stacking within 50 metres lead.
15.40.1: Thickness upto 40mm
LABOUR
0114 Beldar Day 2.00 135.25 270.50
0115 Coolie Day 0.50 135.25 67.62
9999 Sundries L.S 13.39 1.00 13.39
TOTAL 379.83
TOTAL 383.63
Cost of 10.00 sqm 441.17
Say 44.10
715
15.40: Dismantling precast concrete or stone slabs in walls, partition walls etc. including
stacking within 50 metres:
LABOUR
0114 Beldar Day 3.00 135.25 405.75
0115 Coolie Day 0.75 135.25 101.44
9999 Sundries L.S 18.85 1.00 18.85
TOTAL 568.52
TOTAL 574.21
Cost of 10.00 sqm 660.34
Say 66.05
15.41 : Dismantling cement asbestos, Celotax or other hard board ceiling or partition
walls including stacking of serviceable materials and disposal of unserviceable
materials within 50 metres lead.
LABOUR
0114 Beldar Day 0.30 135.25 40.57
0115 Sundries L.S 5.33 1.00 5.33
9999 TOTAL 74.22
TOTAL 74.96
Cost of 10.00 sqm 86.20
Say 8.60
15.42: Dismantling C.I. or asbestos rain water pipe with fittings and clamps including
stacking the material within 50 metres lead :
5.42.1 75 to 80 mm dia pipe.
Detail of cost for 10 metres
LABOUR
0114 Beldar Day 0.36 135.25 48.69
0115 Coolie Day 0.36 135.25 48.69
9999 Sundries L.S 0.91 1.00 0.91
TOTAL 98.29
TOTAL 99.27
Say 11.40
716
5.42.2: 100 mm dia pipe.
Detail of cost for 10.00 metres
LABOUR
0114 Beldar Day 0.36 135.25 48.69
0115 Coolie Day 0.36 135.25 51.40
9999 Sundries L.S 1.56 1.00 1.56
TOTAL 101.65
TOTAL 102.67
Say 11.80
5.42.3: 150 mm dia pipe.
Detail of cost for 10.00 metres
LABOUR
0114 Beldar Day 0.36 135.25 48.69
0115 Coolie Day 0.40 135.25 54.10
9999 Sundries LS 2.08 1.00 2.08
TOTAL 104.87
TOTAL 105.92.
Say 12.20
15.43: Dismantling manually / by mechanical means including stacking of serviceable

material and disposal of unserviceable material within 50metres lead as per direction
of Engineer-in-charge :
15.43.1: Water bound macadam road
Consider a road 6 metres wide and 6 metres
length wise 25 cm average depth = 9.00 cubic
metre
LABOUR
For cutting road taking out soling and
metalling including sorting and screening
0114 Beldar Day 4.80 135.25 649.20
0115 Coolie Day 2.40 135.25 324.60
9999 Labour for stacking of serviceable material L.S 89.70 1.00 89.70
and disposal of unserviceable material within
50 metres lead
TOTAL 1063.50
TOTAL 1074.14
Cost of 36.00 sqm 1235.26
Say 34.30
717
15.43: Dismantling manually / by mechanical means including stacking of serviceable
material and disposal of unserviceable material wifnin 50 metres lead as per direction
of Engineer-in-charge :
15.43.2: Bituminous road
Consider a road 6 metres wide and 6 metres
length wise 30 cm average depth = 10.80
cubic metre
LABOUR
For cutting road taking out soling and
metalling including sorting and screening
0114 Beldar Day 9.60 135.25 1298.40
0115 Coolie Day 4.80 135.25 649.20
9999 Labour for stacking of serviceable material L.S 107.64 1.00 107.64
and disposal of unserviceable material within
50 metres lead
TOTAL 2055.24
TOTAL 2075.79
Cost of 36.00 sqm 2387.16
Say 66.30
718
15.44 Dismantling G.I. pipes (external work) including excavation and refilling trenches
after taking out the pipes manually / by machanical means including stacking of
pipes within 50 metres lead as per direction of Engineer-in-charge :
15.44.1 15 mm to 40 mm nominal bore

LABOUR
Trenching and refilling etc
0114 Beldar Day 0.66 135.25 89.26
0115 Coolie Day 0.66 135.25 89.26
9999 Dismantling G.I. pipe and stacking etc L.S. 35.88 1.00 35.88
TOTAL 214.40
TOTAL 216.54
Say 24.90
15.44 Dismantling G.I. pipes (external work) including excavation and refilling trenches
after taking out the pipes, manually / by machanical means including stacking of
pipes within 50 metres lead as per direction of Engineer-in-charge :
15.44.2 Above 40 mm nominal bore

LABOUR
Trenching and refilling etc
0114 Beldar Day 0.66 135.25 89.26
0115 Coolie Day 0.66 135.25 89.26
9999 Dismantling G.I. pipe and stacking etc L.S. 71.70 1.00 71.76
TOTAL 250.28
TOTAL 252.78
Say 29.05
15.45 Dismantling C.I. pipes including excavation and refilling trenches after taking out
the pipes manually / by machanical means, breaking lead caulked joints, melting of
lead and making into blocks including stacking of pipes, lead at site within 50 metre
lead as per direction of Engineer-in-charge:
15.45.1 Upto 150 mm diameter

Detail of cost for 40.26 metre or 11 nos joints
Earth work in excavation for dismantling
pipes including refilling of excavated earth
1x40.26x0.55x0.75 m= 16.61cum
Deduct for pipes of average 100 mm dia
=lx40.26x(22/7)/4x(0.018)x(0.018) =0.44cum
=16.17cum
LABOUR
719
0114 Beldar Day 4.67 135.25 631.62
0115 Coolie Day 4.80 135.25 649.20
0101 Bhisti Day 0.27 138.45 37.38
0761 Fuel wood quintal 0.46 265.00 121.90
0117 Assistant Fitter or 2nd class Fitter Day 0.63 141.60 89.21
0114 Beldar Day 4.50 135.25 608.62
9999 Carriage and L.S. 53.82 1.00 53.82
TOTAL 2198.97
TOTAL 2220.96
Say 63.45
the pipes manually/by mechaincal means. breaking lead caulked joints, melting of
lead and making into blocks including stacking of pipes, lead at site within 50
metre lead as per direction of Engineer-in-charge:
15.45.2 Above 150 mm dia upto 300 mm dia.

1x40.26x0.65x0.75 m =19.63cum
= lx40.26x(22/7)/4x(0.274)x(0.274)=2.37cum
=17.26cum
LABOUR
0114 Beldar Day 4.99 135.25 674.90
0115 Coolie Day 5.12 135.25 692.48
0101 Bhisti Day 0.29 138.45 40.15
0114 Beldar Day 7.50 135.25 1014.38
9999 Carriage L.S. 7.50 1.00 80.73
TOTAL 2 981.33
TOTAL 3 011.14
Cost of 40.26 metre 3 462.81
Say 86.00
720
the pipes manually/by machanical means breaking lead caulked joints, melting of
lead and making into blocks including stacking of pipes, lead at site within 50
metre lead as per direction of Engineer-in-charge:
15.45.3 Above 300 mm diameter
1x40.26x0.85x0.75 m =25.67cum
=lx40.26x(22/7)/4x(0.48)x(0.48) =7.29cum
= 18.38cum
LABOUR
0114 Beldar Day 5.32 135.25 719.53
0115 Coolie Day 5.46 135.25 738.47
0101 Bhisti Day 0.31 138.45 42.92
0114 Beldar Day 11.50 135.25 1 555.38
9999 Carriage & Sundries L.S. 134.55 1.00 134.55
TOTAL 3 923.58
TOTAL 3 962.82
Cost of 40.26 metre 4 557.24
Say 113.20
15.46 Dismantling steel cylinder R.C. pipes including excavation and refilling trenches
after taking out the pipes manually/ by machanical maeans breaking lead caulked
joints, melting of lead and making into blocks including stacking of pipes, lead at
site within 50 metres lead as per direction of Engineer-in-charge:
1x40.26x1.30x1.65 m =86.36cum
=1x40.26x(22/7)/4x(0.48)x(0.48) =7.29 cum
= 79.07 cum
LABOUR
0114 Beldar Day 5.32 135.25 719.53
0115 Coolie Day 5.46 135.25 738.47
0101 Bhisti Day 0.31 138.45 42.92
0114 Beldar Day 11.50 135.25 1555.38
9999 Carriage and sundries L.S. 134.55 1.00 134.55
TOTAL 3923.58
TOTAL 3 962.82
Cost of 40.26 metre 4 557.24
Say 113.20
721
15.46 Dismantling steel cylinder R.C. pipes including excavation and refilling trenches
after taking out the pipes breaking lead caulked joints, melting of lead and making
into blocks including stacking of pipes, lead at site within 50 metres lead as per
direction of Engineer-in-charge:

lx40.26xl.30xl.65 m =86.36cum
= 1 x40.26x(22/7)/4x( 1.00)x( 1.00) =31.63cum
=54.73 cum
LABOUR
0114 Beldar Day 15.82 135.25 2139.66
0115 Coolie Day 16.25 135.25 2197.81
0101 Bhisti Day 0.93 138.45 128.76
0114 Beldar Day 20.00 135.25 2 705.00
TOTAL 9677.84
TOTAL 9 774.62
Cost of 40.26 metre 11 240.81
Say 279.20
15.47 Dismantling asbestos cement pressure pipes including excavation and refilling
trenches after taking out the pipes manually / by mechanical means and stacking
pipes within 50 metres lead as per direction of Engineer-in-charge:

Detail of cost for 10 metre or 11 nos joints
10.00x0.55x0.75 m =4.125cum
=1x10x(22/7)/4x(0.118)x(0.118) =0.109cum
=4.016cum
LABOUR
0114 Beldar Day 1.16 135.25 156.89
0115 Coolie Day 1.19 135.25 160.95
0101 Bhisti Day 0.07 138.45 9.69
0114 Beldar Day 0.36 135.25 48.69
0115 Coolie Day 0.38 135.25 51.40
TOTAL 429.18
TOTAL 433.47
Say 49.85
722
15.47. Dismantling asbestos cement pressure pipes including excavation and refilling
trenches after taking out the pipes manually / by mechanical means and stacking
the pipes within 50 metres lead as per direction of Engineer-in-charge:

Detail of cost for 10 metre or 11 nos joints
10.00x0.65x0.75 m =4.88cum
= lxl0x(22/7)/4x(0.274)x(0.274)=0.590cum
=4.29cum
LABOUR
0114 Beldar Day 1.24 135.25 167.71
0115 Coolie Day 1.28 135.25 173.12
0101 Bhisti Day 0.07 138.45 9.69
0114 Beldar Day 0.36 135.25 48.69
0115 Coolie Day 0.88 135.25 119.02
TOTAL 522.01
TOTAL 527.23
Say 60.65
15.48 Taking out C.I. cover with frame from R.C.C. top slab of manholes of various sizes
including demolishing of R.C.C. work manually / by mechanical means and stacking
of usefull materials near the site and disposal of unserviceable materials within 50
metres lead as per direction of Engineer-in-charge.

Detail of cost for 1 man hole
Demolition of R.C.C. slab
1.3x1.2x0.15 m=0.234cum
Less cover 0.61x0.455x0.15 m =0.042cum
=0.192cum
LABOUR
0114 Beldar Day 0.50 135.25 67.62
0115 Coolie Day 0.14 135.25 18.94
9999 Removel of C.I. Cover with frame including L.S. 1.30 1.00 1.30
stacking
9999 Sundries L.S. 7.15 1.00 7.15
TOTAL 95.01
TOTAL 95.96
Say 110.35
723
15.49 Taking out C.I. cover with frame from R.C.C. top slab of inspection chambers of
various sizes including demolishing of R.C.C. work manually/ by mechanical means
and stacking of useful materials near the site and disposal of unserviceable materials
within 50 metres lead as per direction of Engineer-in-charge.

Detail of cost for 1 man hole
Demolition of R.C.C. slab
1.1x0.9x0.15 m=0.148cum
Less cover 0.61x0.455x0.15 m =0.042cum
=0.106cumSay 0.11 cum
LABOUR
0114 Beldar Day 0.29 135.25 39.22
0115 Coolie Day 0.08 135.25 10.82
9999 Removel of C.I. Cover with frame including L.S. 0.65 1.00 0.65
stacking
9999 Sundries L.S. 5.33 1.00 5.33
TOTAL 56.02
TOTAL 56.58
Say 65.05
15.50 Dismantling of R.C.C. spun vent shaft including excavating the cement concrete pit
completely, taking out the shaft, refilling the excavated gap, stacking the useful
materials near the site and disposal of unserviceable materials within 50 metres
lead.

Detail of cost for 1 each
Dismantling cement concrete
(a) 1:4:8: 0.90x0.90x1.35m =1.094cum
Less shaft 1/4x22/7x(0.450)x(0.450)x1.10 m
=0.175cum
=0.919cum Say 0.92cum
(b)1:2:4 : 90x0.90x0.15m =0.122cum
Less shaft 1/4x22/7x0.15x0.45 m =0.024cum
=0.098cum Say 0. lOcum
LABOUR
0114 Beldar Day 0.81 135.25 109.55
0115 Coolie Day 0.51 135.25 68.98
9999 Sundries L.S. 1.82 1.00 1.82
0114 Beldar Day 0.16 135.25 21.64
0115 Coolie Day 0.07 135.25 9.47
9999 Sundries L.S. 0.52 1.00 0.52
0130 Mistry Day 0.25 151.50 37.88
0100 Bandhani Day 1.00 138.45 138.45
0114 Beldar Day 1.00 135.25 135.25
9999 Sundries for scaffolding etc L.S. 53.82 1.00 53.82
TOTAL 612.55
TOTAL 618.68
Say 711.50
724
15.51 Dismantling of road gully chamber of various sizes including C.I. grating with frame
including stacking of useful materials near the site and disposal of unserviceable
materials into municipal dumps within 50 metres lead including refilling the
excavated gap.
Detail of cost for one chamber

a) 1:5:10 : 1.05x1.00x0.15m=0.16cum
Dismantling brick work in cement mortar
2.70x0.20x0.45m =0.24cum
b) 1:2:4: 2.70x0.20x0.15m =0.08cum
LABOUR
0114 Beldar Day 0.14 135.25 18.94
0115 Coolie Day 0.09 135.25 12.17
9999 Sundries L.S. 0.26 1.00 0.26
0114 Beldar Day 0.25 135.25 33.81
0115 Coolie Day 0.22 135.25 29.76
9999 Sundries L.S. 0.52 1.00 0.52
0114 Beldar Day 0.13 135.25 17.58
0115 Coolie Day 0.06 135.25 8.12
9999 Dismantling C.I. Grating L.S. 7.15 1.00 7.15
TOTAL 128.70
TOTAL 129.99
Say 149.50
15.52 Dismantling of flushing cistern of any size including stacking of useful materials
near the site and disposal of unserviceable materials within 50 metres lead.

Detail of cost for 1 each
LABOUR
0116 Fitter (grade 1) Day 0.25 151.50 37.88
0114 Beldar Day 0.50 135.25 67.62
9999 Sundries L.S. 17.94 1.00 17.94
TOTAL 123.44
TOTAL 124.67
Say 143.35
725
53.53 Dismantling of C.I. sluice valve including stacking of useful materials within a lead
of 50 metres
15.53.1 Upto 150mm diameter
Detail of cost of dismantling 10 sluice valves
(ace.) 100mm
LABOUR
0116 Fitter (grade 1) Day 0.60 151.50 90.90
0114 Beldar Day 1.60 135.25 216.40
9999 Sundries for removing the R.C.C. cover etc for L.S. 9.70 1.00 89.70
dismantling sluice valve
TOTAL 453.64
TOTAL 458.08
Cost of 10 Nos 526.91
Cost of 1 No 52.69
Say 52.70
15.53 Dismantling of C.I. sluice valve including stacking of useful materials within a lead
of 50 metres
Detail of cost of dismantling 10 sluice valves
(ace.) 100mm
LABOUR
0116 Fitter (grade 1) Day 2.40 151.50 363.60
0114 Beldar Day 6.40 135.25 865.60
9999 Sundries for removing the R.C.C. cover etc for L.S. 89.70 1.00 89.70
dismantling sluice valve
TOTAL 1536.96
TOTAL 1552.33
Cost of 1 No 178.52
Say 178.50
15.54 Dismantling of spindle fire hydrant including stacking of useful materials within 50
metres lead.

Detail of cost for 10 Nos
LABOUR
0116 Fitter (grade 1) Day 1.50 151.50 227.25
0114 Beldar Day 4.00 135.25 541.00
TOTAL 909.85
TOTAL 918.95
Cost of 1 No 105.68
Say 105.70
726
15.55 Dismantling of cement concrete platform along with curtain walls and base concrete
etc. including stacking of useful materials near the site and disposal of unserviceable
materials within 50 metres lead :
15.55.1 120 x 120 cm (outside to outside)

Detail of cost for one platform
Dismantling cement concret 1:5:10
4.00x0.35x0.12m =0.168cum
0.80x0.80x0.075m =0.048cum
4.00x0.20x0.30m =0.24cum
4.00x0.10x0.20m =0.088cum
Dismantling 40 mm C.C. flooring 1:2:4
1.00x 1.00x0.04m =0.04cum
LABOUR
0114 Beldar Day 0.19 135.25 25.70
0115 Coolie Day 0.12 135.25 16.23
9999 Sundries L.S. 0.39 1.00 0.39
0114 Beldar Day 0.35 135.25 47.34
0115 Coolie Day 0.30 135.25 40.57
9999 Sundries L.S. 0.91 1.00 0.91
0114 Beldar Day 0.06 135.25 8.12
0115 Coolie Day 0.03 135.25 4.06
TOTAL 143.45
TOTAL 144.88
Say 166.60
etc. including stacking of useful materials near the site and disposal of
unserviceable materials within 50 metres lead :
15.55.2 210 x 120 cm (outside to outside)

Dismantling cement concrete 1:5:10
5.80x0.35x0.22m =0.243cum
0.80x1.70x0.075m =0.102cum
5.80x0.20x0.30m =0.348cum
6.20x0.10x0.20m =0.124cum
1.90x 1.00x0.04m =0.08cum
LABOUR
0114 Beldar Day 0.31 135.25 41.93
0115 Coolie Day 0.19 135.25 25.70
727
9999 Sundries L.S. 0.65 1.00 0.65
0114 Beldar Day 0.50 135.25 67.62
0115 Coolie Day 0.42 135.25 56.80
9999 Sundries L.S. 1.30 1.00 1.30
0114 Beldar Day 0.13 135.25 17.58
0115 Coolie Day 0.06 135.25 8.12
TOTAL 220.09
TOTAL 222.29
Say 255.65
etc. including stacking of useAl materials near the site and disposal of unserviceable
materials within 50 metres lead :
15.55.3 320 x 120 cm (outside to outside

Dismantling cement concrete l:5:10
8.00x0.35x0.12m =0.336cum
2.80x0.80x0.075m =0.168cum
8.00x0.20x0.30m =0.48cum
8.40x0.10x0.20m =0.168cum
3.00x1.00x0.04m =0.12cum
LABOUR
0114 Beldar Day 0.44 135.25 59.51
0115 Coolie Day 0.28 135.25 37.87
9999 Sundries L.S. 0.91 1.00 0.91
0114 Beldar Day 0.69 135.25 93.32
0115 Coolie Day 0.59 135.25 79.80
9999 Sundries L.S. 1.56 1.00 1.56
0114 Beldar Day 0.19 135.25 25.70
0115 Coolie Day 0.09 135.25 12.17
TOTAL 311.36
TOTAL 314.47
Say 361.65
728
15.56 Dismantling old plaster or skirting raking out joints and cleaning the surface for
plaster including disposal of rubbish to the dumping ground within 50 metres lead.

LABOUR
0114 Beldar Day 0.36 135.25 48.69
0115 Coolie Day 0.08 135.25 10.82
0101 Bhisti Day 0.07 138.45 9.69
TOTAL 70.63
TOTALr 71.34
Cosfof 10.00 sqm 82.04
Say 8.20
15.57 Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false
ceiling including disposal of unserviceable surplus material and stacking of
serviceable material with in 50 meters lead as directed by Engineer-in-charge.

LABOUR
0114 Beldar Day 0.30 135.25 40.57
9999 Sundries L.S. 5.38 1.00 5.38
TOTAL 74.27
TOTAL 75.01
Cost of 10.00 sqm 86.26
Say 8.65
15.58 Demolishing C.C. /R.C.C. work by mechanical means and stockpiling at designated
locations and disposal of dismantled materials upto a lead of 1000m, stacking
serviceable and unserviceable material separately including cutting reinforcement
bars.

Details of cost for 1 cum
LABOUR
0128 Mate Day 0.03 138.45 4.15
Labour for operating pneumatic tools
0139 Skilled Beldar Day 0.50 138.45 69.22
0114 Beldar Day 0.50 135.25 67.62
Labour for cutting reinforcement bars.
0114 Beldar Day 0.50 135.25 67.62
MACHINERY
729
0040 Air compressor 250 cfm with two leads for Day 0.125 1600.00 200.00
preumatic cutters/ hammers.
0039 Tractor trolley . per day 0.05 1000.00 50.00
0041 Joint cutting machine with 2-3 blades per day 0.125 800.00 100.00
TOTAL 629.41
TOTAL 635.70
Cost for 1 cum 731.06
Say 731.05
15.59 Dismantling of flexible pavement (bituminous courses) by mechanical means and

disposal of dismantled material upto a lead of 1000 metres, as per direction of
Engineer-in-charge.

LABOUR
0128 Mate Day 0.01 138.45 1.38
0114 Beldar Day 0.30 135.25 40.57
MACHINERY
0039 Tractor trolley. per day 0.0475 1000.00 47.50
0038 Tractor with ripper attachment. per day 0.002 1000.00 2.00
TOTAL 91.45
Add 1% for water charges. 0.91
TOTAL 92.36
Say 106.20
731
SUB HEAD : 16.0

ROAD WORK
733
16.1 : Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne
capacity after excavating earth to an average of 22.5 cm. depth, dressing to camber
and consolidating with road roller including making good the undulations etc. and
re-rolling the sub grade and disposal of surplus earth lead upto 50 metres.
Details of cost for 100.00 sqm.

(A) preparation of subgrade.
Earth work in excavation including dressing
etc. 100sqm.x22.5cm (average depth) =
22.5cum.
Labour
0128 Mate Day 1.80 138.45 249.21
0115 Coolie Day 18.00 135.25 2,434.50
0114 Beldar Day 0.27 135.25 36.52
0003 Hire charges of road roller Day 0.054 1000.00 54.00
0113 Chowkidar Day 0.054 135.25 7.30
1235 Diesel for road roller @ 18 litres litre 0.972 30.25 29.40
9999 Carriage of diesel L.S. 1.43 1.00 1.43
9999 Sundries L.S. 6.76 1.00 6.76
(B) Conslidation of subgrade
Roller charges (one roller does 1860 sqm. of
conosolidation of sub - grade with road roller
of 8 to 12 tonne capacity including making
good the undulations etc. with earth or quarry
spoils etc. and rerolling the subgrade
0003 Hire charges of Diesel Road Roller - 8 to 10 Day 0.054 1 000.00 54.00
tonne
0113 Chowkidar Day 0.054 135.25 7.30
1235 Diesel oil litre 0.972 30.25 29.40
9999 Carriage of diesel. L.S. 1.43 1.00 1.43
9999 Sundries L.S. 6.76 1.00 6.76
TOTAL 2,918.01
TOTAL 2,947.19
Cost for 100 sqm. 3,389.27
Cost per sqm. 33.89
Say 33.90
16.2 : Extra for compaction of earth work in embankment under optimum moisture
conditions to give at least 95% of the maximum dry density (proctor density).
Details of cost for 10.00 cum.

Labour
(Extra to item No.2.3 in Earth work)
0101 Bhishti Day 0.17 138.45 23.54
Roller charges (one roller does 1860sqm. of
consolidation per day of 8 hours and uses 18
litres diesel)
0003 Hire charges of road roller Day 0.008 1 000.00 8.00
0113 Chowkidar Day 0.008 135.25 1.08
1235 Diesel for road roller @ 18 litres per day i.e. litre 0.144 30.25 4.36
0.008x18=0.144 litres
734

9999 Sundries L.S. 1.43 1.00 1.43
TOTAL 38.80
TOTAL 39.19
Cost of 10 cum. 45.07
Cost per cum. 4.51
Say 4.50
16.3 : Supplying and stacking at site.

16.3.1 : 90 mm to 45 mm size stone aggregate.

Materials :
2901 Stone Aggregate 125 mm (one size) cum 0.10 575.00 57.50
2206 Carriage cum 1.00 57.83 57.83
Total 639.08
Total 645.47
Say 742.30
16.3 Supplying and stacking at site.

16.3.2 63 mm to 45 mm size stone aggregate.

Materials :
2902 Stone Aggregate 90 mm (one size). cum 0.10 575.00 57.50
2206 Carriage of aggregate cum 1.00 57.83 57.83
Total 661.58
Total 668.20
Say 768.45
16.3 : Supplying and stacking at site.

16.3.3 : 53 mm to 22.4 mm size stone aggregate.

Materials :
0291 Stone Aggregate 63mm (one size) cum 0.05 600.00 30.00
0293 Stone Aggregate 45mm (one size) cum 0.65 650.00 422.50
2206 Carriage cum 1.00 57.83 57.83
735
Total 697.83
Total 704.81
Say 810.55

16.3.4 Over burnt (Jhama) brick aggregate 120 mm to 40 mm.

Materials :
2908 Brick aggregate 120 mm to 40 mm size cum 1.00 285.00 285.00
2260 Carriage cum 1.00 57.83 57.83
Total 342.83
Total 346.26
Say 398.20


Materials :
2909 Brick aggregate 90mm to 45mm cum 1.00 320.00 320.00
2260 Carriage cum 1.00 57.83 57.83
Total 377.83
Total 381.61
Say 438.85

16.3.6 Stone screening 13.2 mm nominal size (Type A).

Material
2910 Stone chippings 13.2mm cum 0.05 700.00 35.00
2911 Stone chippings 10mm/11.2mm cum 0.80 700.00 560.00
2202 Carriage cum 1.00 53.21 53.21
TOTAL 768.21
TOTAL 775.89
Cost for one cum. 892.27
Say 892.25
736
16.3.7 Stone screening 11.2 mm nominal size (Type B)

Material
2904 Stone screenings 180 mircorn cum 0.15 800.00 120.00
2202 Carriage of stone aggregate 11.2mm & 5.6mm cum 0.85 53.21 45.23
2267 Carriage of stone screenings 180 mircron cum 0.15 53.21 7.98
(dust)
TOTAL 843.21
TOTAL 851.64
Say 979.40

16.3.8 Red bajri

Material
0304 Cost of bajri at quarry cum 1.00 510.00 510.00
2311 Carriage cum 1.00 53.21 53.21
TOTAL 563.21
TOTAL 568.84
Say 654.15

16.3.9 Good earth.

Excavation:
0114 Beldar Day 0.177 135.25 23.94
0115 Coolie Day 0.167 135.25 22.59
0979 Royalty for good earth cum 1.00 11.00 11.00
2241 Carriage of good earth by mechanical cum 1.00 66.51 66.51
transport upto 1 km lead
TOTAL 124.04
TOTAL 125.28
Cost per cum. 144.07
Say 144.05
737
16.3.10 Moorum.

Material
0810 Cost of moorum at quarry cum 1.00 310.00 310.00
2265 Carriage cum 1.00 53.21 53.21
TOTAL 363.21
TOTAL 366.84
Say 421.85
16.4 Laying , spreading and compacting stone aggregate of specified sizes to WBM
specifications including spreading in uniform thickness, hand picking , rolling with
3 wheeled road / vibratory roller 8-10 tonne in stages to proper grade and camber,
applying and brooming requisite type of screening / binding material to fillup
interstices of coarse aggregate watering and compacting to the required density.

Labour
0114 Beldar Day 0.26 135.25 35.16
0115 Coolie Day 0.263 135.25 35.16
0101 Bhisti Day 0.26 138.45 36.00
Roller charges (one roller does 30 cum
litres of diesel oil).
0003 Hire charges of Road Roller Day 0.033 1000.00 33.00
0113 Chowkidar Day 0.033 135.25 4.46
Diesel for road roller @ 18 litres
0.033x18 = 0.59
1235 Diesel oil litre 0.59 30.25 17.85
9999 Sundries L.S. 2.73 1.00 2.73
TOTAL 165.79
TOTAL 167.45
Say 192.55
16.5 Laying water bound macadam sub-base withbrick aggregate and blinding
material, earth etc. including screening, sorting and spreading to template and
consolidation with light power road-roller etc. complete. (payment for brick
aggregate and moorum etc. to be made separately)

Labour
0114 Beldar Day 0.35 135.25 47.34
0115 Coolie Day 0.26 135.25 35.16
738
0101 Bhishti Day 0.18 138.45 24.92

Roller charges (one roller does 230cum.
litres of diesel oil)
0113 Chowkidar Day 0.004 135.25 0.54
1235 Diesel for road roller @ 18 litres per day litre 0.072 30.25 2.18
18x0.004=0.072
9999 Sundries L.S. 2.73 1.00 2.73
TOTAL 117.26
TOTAL 118.43
Say 136.20
16.5 Laying water bound macadam sub-base withbrick aggregateand blinding material,
earth etc. including screening, sorting and spreading to template and consolidation
with light power road-roller etc. complete.(payment for brick aggregate and moorum
etc. to be made separately)

Labour
0114 Beldar Day 0.35 135.25 47.34
0115 Coolie Day 0.26 135.25 35.16
0101 Bhishti Day 0.18 138.45 24.92
Roller charges (one roller does 230cum.
0113 Chowkidar Day 0.004 135.25 0.54
18x0.004=0.072
9999 Sundries L.S. 2.73 1.00 2.73
TOTAL 117.26
TOTAL 118.43
Say 136.20
16.6 Supplying, stacking and Spreading 6 mm thick red bajri, watering and rolling complete
including preparation of the surface and rolling.
16.6.1 With road roller/ hand roller.
Details of cost for 6 mm thick and 100.00 sqm

area = 0.60 cum.
(A) Supplying and stacking of Red bajri at
site.
Material:
739
2311 Carriage of Red bajri cum 0.6 53.21 31.93

(B) Spreading of red bajri
Labour
0114 Beldar Day 0.54 135.25 73.04
0101 Bhishti Day 0.54 138.45 74.76
Roller charges (one roller does 1860sqm.
0113 Chowkidar Day 0.054 135.25 7.30
1235 Diesel for road roller @ 18 litres per day i.e. litre 0.972 30.25 29.40
18x0.054=0.972
TOTAL 577.86
TOTAL 583.64
Cost for 100 sqm. 671.19
Cost per sqm. 6.71
Say 6.70
16.7 Brick edging in full brick width and half brick depth including excavation, refilling
and disposal of surplus earth lead upto 50 metres.
16.7.1 With F.P.S. bricks of class designation 75
Details of cost for 10.00 m.

Material
2602 Bricks of class designation 75 including 12% 1000 Nos 160.00 1,900.00 304.00
wastage
2201 Carriage of Bricks 1000 Nos 160.00 141.88 22.70
0115 Coolie Day 0.35 135.25 47.34
9999 Removal of rubbish L.S. 17.94 1.00 17.94
9999 Sundries L.S. 8.97 1.00 8.97
TOTAL 450.78
TOTAL 455.29
Cost for 10m. 523.58
Cost per m. 52.36
Say 52.35
740
16.8 Brick edging laid lengthwise with half brick depthincluding excavation, refilling
and disposal of surplus earth lead upto50 metres :
Details of cost for 10.00 m.

Material
2602 Bricks of class designation 75 including 12% 1000 Nos 49 1,900.00 93.10
wastage
2201 Carriage of Bricks 1000 Nos 49.00 141.88 6.95
Labour
0115 Coolie Day 0.09 135.25 12.17
9999 Removal of rubbish L.S. 4.16 1.00 4.16
TOTAL 128.10
TOTAL 129.38
Cost for 10m. 148.79
Cost per m. 14.88
Say 14.90
16.9 Scarifying metalled (water-bound) road surface including disposal of rubbish lead
upto 50m and consolidation of the aggregate received from scarifying with power
road roller of 8 to lOtonne capacity.

Labour
0114 Beldar Day 1.35 135.25 182.59
0115 Coolie Day 1.08 135.25 146.07
Consolidation of scarified material
100sqm.x50mm = 5cum
Less 20% wastage = 1 cum.
= 4 cum.
0113 Chowkidar Day 0.132 135.25 17.85
1235 Diesel for road roller @ 18 litres/ day(8 hour) litre 2.376 30.25 71.87
9999 Carriage L.S. 1.43 1.00 1.43
9999 Sundries L.S. 5.46 1.00 5.46
TOTAL 557.27
TOTAL 562.84
Cost per sqm. 6.47
Say 6.45
741
16.10 Making bajri path including preparation of subgrade, supplying and laying brick
aggregate of 50mm nominal size 7.5 cm deep with blinding material consisting of 12
mm moorum and 12 mm red bajri consolidated with road roller.

Earth work in excavation including dressing
etc.
100x0.075=7.5cum.
(A)(Rate as per item no. 2.6.1 of S.H. Earth work) cum 7.50 101.85 763.88
Collection and stacking of brick aggregate
53 mm nominal size 100x0.075 =7.50cum.
Brick Aggregate
0286 53 mm nominal size 100x0.75=7.50cum. cum 7.50 355.00 2,662.50
2260 Carriage cum 7.50 57.83 433.72
Supply staking Red Bajri
100x0.012= 1.2 cum.
(A) (Rate as per item No.16.3.8) cum 1.20 654.15 784.98
Collection and stacking of moorum at site
100x0.012= 1.20cum.
(Rate as per item No.16.3.10) cum 1.20 421.85 506.22
Spreading and consolidation of brick
aggregate and blinding material etc.
0114 Beldar Day 1.95 135.25 263.74
0115 Coolie Day 2.63 135.25 355.72
0101 Bhishti Day 1.35 138.45 186.91
0113 Chowkidar Day 0.135 135.25 18.26
1235 Diesel for road roller @ 18 litres/ day(8 hour) litre 2.43 30.25 73.51
9999 Sundries L.S. 20.15 1.00 20.15
Spreading of red bajri, watering and rolling
0003 Roller charges Day 0.054 1 000.00 54.00
0113 Chowkidar Day 0.054 135.25 7.30
1235 Diesel for road roller litre 0.972 30.25 29.40
TOTAL 6,307.50
Add 1 % for water charges on all except ‘A’ 42.52
TOTAL 6,350.02
Cost for 100 sqm. 6,994.26
Cost per sqm. 69.94
Say 69.95
742
16.11 Dry stone pitching 22.5 cm thick including supply of stones and preparing surface
complete.

Material
Stone for pitching 15 cm x
1158 22.5 crn thick cum 2.25 332.00 747.00
2216 Carriage 2.25x2245/1000 = 5.05 t tonne 5.05 47.29 238.81
Labour
0114 Beldar Day 2.15 135.25 290.79
0115 Coolie Day 1.61 135.25 217.75
9999 Sundries L.S. 6.76 1.00 6.76
TOTAL 1 817.66
TOTAL 1 835.84
Cost for 10 sqm. 2 111.22
Cost per sqm. 211.12
Say 211.10
16.12 Dry brick pitching half brick thick in drains including supply of bricks and preparing
the surface complete :

Material
2602 Bricks of class designation 75 1 000 Nos 645.0 1,900.00 1,225.50
2201 Carriage for bricks 1 000 Nos 645.0 141.88 91.51
Labour
0114 Beldar Day 1.08 135.25 146.07
TOTAL 1,580.32
TOTAL 1,596.12
Cost for 10 sqm. 1,835.54
Say 183.55
743
16.13 Cutting road and making good the same including supply of extra quantities of
materials i.e. aggregate, moorum screening, red bajri and labour required. 16.13.1
16.13.1 bituminous portion
Details of cost for 1.08cum. (road 6 metres

wide, 0.6 metre length wise and 0.30m
(average depth) volume =• 1.08 cum).
Material
Supplying and stacking stone aggregate 53mm
to 24mm nominal size at site.
(A) (Rate as per item No 16.3.8) cum 0.09 810.55 72.95
(A) Supplying and stacking red bajri at site cum 0.023 654.15 15.05
(Rate as per item No. 16.3.8)
(A) Supplying and stacking moorum at site cum 0.022 421.85 9.28
(Rate as per item No. 16.3.10)
2911 Stone chipping 11.2mm size cum 0.092 700.00 64.40
6309 Paving Bitumen A-90 or S-90 tonne 0.011 22,500.00 247.50
2211 Carriage tonne 0.011 53.21 0.59
Labour
For cutting road and taking out soling and
metalling including sorting and screening.
0114 Beldar Day 0.96 135.25 129.84
0115 Coolie Day 0.48 135.25 64.92
Relaying soling stone 3.6x0.15=0.54cum.
0114 Beldar Day 0.24 135.25 32.46
0115 Coolie Day 0.24 135.25 32.46
Relaying road metal with extra quantity and
consolidation to 0.10m, thickness
3.6x0.10=0.36cum.
0114 Beldar Day 0.71 135.25 96.03
0115 Coolie Day 0.48 135.25 64.92
0101 Bhishti Day 0.10 138.45 13.84
Painting two coats, 3.6sqm. including labour
for spreading grit
0114 Beldar Day 0.48 135.25 64.92
0115 Coolie Day 0.48 135.25 64.92
9999 Barrier, chowkidar, sprayman, mate, etc. L.S. 40.43 1.00 40.43
TOTAL 1,019.41
TOTAL 1,028.63
Cost for 1.08 cum. 1,168.33
Cost per cum. 1,081.79
Say 1,081.80
16.13 Cutting road and making good the same including supply of extra quantities of
materials i.e. aggregate, moorum screening, red bajri and labour required.
16.13.2 Water bound macadam.
Details of cost for 0.90cum.

Consider a road 6 metres wide and 0.6m.
744
lengthwise and 0.25m cm average depth

=0.90cum.
Material
Supplying and stacking stone aggregate 53mm
to 22 mm nominal size at site.
A (Rate as per item No. 16.3.3) cum 0.09 810.55 72.95 (A)
Supplying and stacking red bajri at site
Supplying and stacking moorum at site.
Labour
For cutting road and taking out soling and
metalling including sorting and screening.
0114 Beldar Day 0.48 135.25 64.92
0115 Coolie Day 0.24 135.25 32.46
For relaying soling stone 3.6x0.15=0.54cum.
0114 Beldar Day 0.24 135.25 32.46
0115 Coolie Day 0.24 135.25 32.46
For relaying road metal with extra quantity
and consolidation to 0.10m thickness -
3.6x0.10=0.36cum.
0114 Beldar Day 0.48 135.25 64.92
0115 Coolie Day 0.48 135.25 64.92
0101 Bhishti Day 0.10 138.45 13.84
9999 Barrier and chowkidar etc. L.S. 53.82 1.00 53.82
TOTAL 457.08
TOTAL 460.68
Cost for 0.90 cum. 515.19
Say 572.45
16.14 Cutting bajri paths and making good the same including supply of extra quantities
of brick aggregate, moorum and red bajri required.

10x0.075=0.75cum.
Material
0286 Supplying and stacking 50mm brick aggregate cum 0.19 355.00 67.45
at site(extra quantity)
2260 Carriage cum 0.19 57.83 10.99
Supplying and stacking red bajri at site
(A) (Rate as per item No. 16.3.8) cum 0.06 654.15 39.25 (A)
Supplying and stacking moorum at site
(A) (Rate as per item No. 16.3.10) cum 0.06 421.851 25.31 (A)
Labour
For cutting, sorting out, spreading and
consolidation of aggregate
0114 Beldar Day 1.60 135.25 216.40
0115 Coolie Day 0.80 135.25 108.20
745
TOTAL 467.60
TOTAL 471.63
Cost per sqm. 53.27
Say 53.25
16.15 Supplying at site :

16.15.1 R.C.C. Standards post/ struts/rails/ pales of mix 1:1.5:3 ( 1 cement : 1.5 coarse
sand : 3 graded stone aggregate 12.5 mm nominal size) with wooden plugs or
6mm bar nibs, wherever required as per direction of Engineer-in-charge cost of
earth works in excavation, concrete works to be paid separately).

Details of cost for 10 posts = 0.336cum
Cubical contents of one post
Area bottom A1 =(15+12.5)/2 x8.75+1/2x3.14
x(6.25)2
=120.31+61.38=181.69sqm.
Area bottom A2 = (10+7.5)/2 x6.25+’/2x3.14
x(3.75)2 sqm
= 54.68+22.08 = 76.76 sqm.
 (A1A2) = 118.10sqm
A1+A2+ (A1 A2)= 0.03766 sqm
Volume = (1.05)/3x0.03766 = 0.01316 cum
=0.0132cum.
Volume of lower and square portion
(16.5x16.5x75)/100x100x100 = 0.0204cum.
Total volume = 0.0132+0.0204 cum
= 0.0336 cum. Qty. for 10 post
= 0.0336x10
= 0.336cum.
Cement concrete 1:1.5:3 (1 Cement: 1.5
Coarse sand : 3 graded stone aggregate
12.5mm nominal size)
(A) (Rate as per item no 4.1.2) cum 0.336 3,629.80 1,219.61 (A)
Extra labour for laying cement concrete in
RCC work
0114 Beldar Day 0.034 135.25 4.60
0101 Bhishti Day 0.067 138.45 9.28
0128 Mate Day 0.013 138.45 1.80
M.S. Reinforcement
6mm dia. bars
10x4xl.88m = 75.20m+
10x9x0.50m=45.00m =
120.20m
120.2)[email protected]/m =26.44kg.
A (Rate as per item No. 5.22.2) kg 26.44 41.50 1,097.26 (A)
Centering and shuttering
A (Rate as in item no 5.9.1) sqm 6.99 119.25 833.56 (A)
6mm C.Plaster 1:2 (1 Cement: 2 fine sand)
(0.072)/l 0x9.88 = 0.071
746
0367 Cement tonne 0.05 4,500.00 225.00
2209 Carriage tonne 0.05 47.29 2.36
0983 Fine sand cum 0.07 320.00 22.40
2261 Carriage cum 0.07 53.21 3.72
0114 Beldar Day 0.05 135.25 6.76
0101 Bhishti Day 0.02 138.45 2.77
0155 Mason Day 0.64 146.55 93.79
0115 Coolie Day 0.80 135.25 108.20
0101 Bhishti Day 0.27 138.45 37.38
9999 Hire and running charges of mixer L.S 1.95 1.00 1.95
9999 Extra for removing burr, cleaning with wire L.S 13.26 1.00 13.26
brushes, pock making with pointed tool etc.
complete
9999 Carriage of RCC posts L.S 53.82 1.00 53.82
9999 Wooden plugs or 6 mm bar nibs L.S 12.22 1.00 12.22
9999 Sundries L.S 13.52 1.00 13.52
TOTAL 3,778.64
Add 1% for water charges on all
except ‘A’ 6.28
Add 15% for contractors profit on all 3,784.92
except ’A’ 95.17
cost for 0.366 cum 3,880.09
cost for one cum 11,547.90
Say 11,547.90
16.15 Supplying at site :

16.15.2 Welded steel wire fabric of required width rectangular mesh painted with two or
more coats of enamel paint of approved shade over a coat of primer (Painting to
be paid for separately.)

Material
1021 Steel wire fabric 0.9m wide sqm 27.00 310.00 8,370.00
rectangular mesh 75x25mm size weight not
less than 7.75kg/sqm. 30x0.9 = 27sqm.
2314 Carriage of wire tonne 0.209 47.29 9.88
7.75x27=209.25kg=0.209tonne
TOTAL 8,379.88
TOTAL 8,463.68
Add 15%Tor contractor’s profit and overheads 1,269.55
Cost for 209.25 kg 9,733.23
Cost per kg. 46.51
Say 46.50
16.16 Supplying and fixing turn buckles and straining bolts for barbed wire fencing.

Details of cost for one set
Material
1030 Turn buckles each 1.00 9.00 9.00
1028 Straining bolts each 1.00 50.00 50.00
747
9999 Carriage of turn buckles and straining bolts L.S. 2.73 1.00 2.73
Labour for fixing straining bolts and turn
buckles
TOTAL 75.89
TOTAL, 76.65
Add lwo for contractor’s profit and overheads 11.50
Cost per set 88.15
Say 88.15
16.17 Fencing with R.C.C. post placed at required distance, embedded in cement
concrete blocks, every 15th post, last but one end post and corner post shall
be strutted on both sides and end post one side only, provided with horizontal
lines and two diagonals of barbed wire 9.38 kg per 100 metres (min) between
the two posts fitted and fixed with G.I. staples on wooden plugs or G.I. binding
wire tied to 6 mm bar nibs fixed while casting the post (cost of R.C.C. posts,
struts, earth work and concrete to be paid for separately) :- Payment to be
made per metre cost of total length of barbed wire used.
16.17.1 With G.I. barbed wire
Details of cost for 30m

Material
G.I. barbed wire
30x9 = 270m+
10x6.32 = 63m.
= 333.00m.
1029 333m @9.38kg/100m =31.24kg = 0.31q quintal 0.31 4 400.00 1 364.00
2314 Carriage tonne 0.03 47.29 1.42
9999 G.I. staples or binding wire L.S. 49.40 1.00 49.40
Labour for fixing costs in line, fixing and
stretching wire
0114 Beldar Day 0.50 135.25 67.62
C103 Blacksmith 2nd class Day 0.50 141.60 70.80
9999 Sundries L.S. 13.52 1.00 13.52
TOTAL 1 677.68
TOTAL 1 694.46
Cost for 333m 1 948.63
Cost per m 5.85
Say 5.85
16.18 Fencing with angle iron post placed at required distance embedded in cement
concrete blocks, every 15th post, last but one end post and corner post shall
be strutted on both sides and end post on one side only and provided with
horizontal lines and two diagonals interwoven with horizontal wires, of barbed
wire 9.38 kg per 100 m (minimum) between the two posts fitted and fixed with
G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and
concrete work to be paid for separately):- Payment to be made per metre cost
of total length of barbed wire used.
748
16.18.1 With G.I. barbed wire
Details of cost for 30m

Material:
G.I. barbed wire
30x9 = 270.00m
2xl0x( 12+32) 1/2 = 63.24 m.
= 333.24m
333.24m @9.38kg/l00m
1029 =31.26 kg say 0.31 qtl quintal 0.31 4,400.00 1,364.00
2314 Carriage of barbed wire supplying & Fixing. tonne 0.031 47.29 1.47
Turn buckle & staple
(A) (Rate same as per item No. 16.16) each set 10.00 88.15 881.50 (A)
9999 G.I. staples L.S. 49.40 1.00 49.40
Labour for fixing posts in line and fixing and
stretching wire:
0114 Beldar Day 0.50 135.25 67.62
TOTAL 2,545.71
Add 1% for water charges on all except A 16.64
TOTAL 2,562.35
on all except A
Cost for 333.24m 2,814.48
Cost per m 8.45
Say 8.45
16.19 Supplying at site Angle iron post & strut of required size including bottom to be
split and bent at right angle in opposite direction for 10 cm length and drilling
holes upto 10 mm dia. etc.. complete.
Details of cost for 1 ‘qunital

Material:
M.S. angle = 1.00 qtl.
Add 5% wastage = 0.05 qtl.
1007 =1.05 qtl. quintal 1.05 3100.00 3255.00
2205 Carriage of angle iron tonne 0.105 47.29 4.97
Labour
0114 Beldar Day 0.50 135.25 67.62
For spotting, bending of angle and drilling
holes etc. :
0114 Beldar Day 1.00 135.25 135.25
9999 Sundries such as drilling bit etc. L.S 19.76 1.00 19.76
TOTAL 3730.40
TOTAL 3767.70
Cost for 1 qunital 4332.86
Cost of one kg 43.33
Say 43.35
749
16.20 welded steel wire fabric fencing with posts of specified material and of standard
design placed and embedded in cement concrete blocks 45x45x60cm of mix
1:5:10 (1 cement:5 fine sand : 10 graded stone aggregate 40mm nominal size)
every 15th post, last but one end post and corner post shall be strutted on
both sides and end post on one side only and struts embedded in cement
concrete blocks 70x45x50cm of the same mix, provided with welded steel wire
fabric fixed between the posts fitted and fixed with G.I. staples on wooden
plugs or tied to 6 mm bar nibs with G.I. binding wire (cost of posts, welded
steel wire fabric, painting, earth work in excavation and concrete to be paid for
separately):
Details of csot for 30’metres

i.e.30xl.20=36.00sqm
Labour for fixing posts in line fixing and
stretching - welded wire fabric :
0114 Beldar Day 0.50 135.25 67.62
0102 Blacksmith 1 st class Day 0.50 151.50 75.75
9999 G.I. staple or binding wire L.S. 53.82 1.00 53.82
9999 Sundries L.S 53.82 1.00 53.82
TOTAL 356.98
TOTAL. 360.55
Cost for 36 sqm 414.63
Cost per sqm 11.52
Say 11.50
16.21 Engraving letters in hard stone

Details of cost for 6 letters 8 cm height
Labour
For Engraving stone-
0126 Mason (Ornamental work) Day 0.38 151.50 57.57
9999 Sundries L.S 6.76 1.00 6.76
TOTAL 64.33
TOTAL 64.97
Cost of 6 letters of 8cm heights 74.72
Cost per cm. height per letter 1.56
Say 1.55
16.22 Providing and fixing 15xl5x90cm boundary stone of hard stone with top 30 cm
chisel dressed on all four sides and on top (cost of excavation, refilling and concrete
etc. to be paid for separately).
Details of cost for one stone
1151 Cost of stone 15x15x90cm with 30cm chisel each 1.00 46.00 46.00
dress
750
Labour for fixing

0114 Beldar Day 0.12 135.25 16.23
9999 Carriage to site L.S 4.16 1.00 4.16
TOTAL 66.39
TOTAL 67.05
Cost of each. 77.11
Say 77.10
16.23 Providing and fixing 15cm dia at top 20cm at bottom and 90cm high precast
reinforced cement concrete
1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone aggregate 20mm nominal
size) boundary stone as per standard design including finishing smooth with
cement mortar 1:3 (1 cement: 3 fine sand) (cost of excavation, refilling and
concreting to be paid for separately).

(i) Cement concrete 1.1.5:3 (l cement :1.5 course
sand :3 graded stone aggregate 20mm nominal
size)
L/3 [A1+A2 (A1A2) = 0.825/3 x (0.095222+
0.07522 + 0.75x0.095)x3.142 =0.0186 (A)
Semi Circle-
l/2x4/ 3x22/7x(0.075)3=0.0010 –(B)/ 0.0196
(A+B) Say 0.02cum.
Rate as per item no 4.1.2 cum 0.02 3629.80 72.60 (A)
(ii) Extra for laying cement concerte in RCC
work
0114 Beldar Day 0.002 135.25 0.27
0101 Bhishti Day 0.004 138.45 0.55
0128 Mate Day 0.0008 138.45 0.11
(iii) M.S. reinforcement-
6mm dia. bar
5.99 metre =5.99x0.22 =1.32kg.
(Rate as per item No 5.22.1 kg 1.32 41.50 54.78 (A)
(iv) Centering and shuttering
1/2x3.142 (0.19+0.15)x0.825 =0.441 +
3.142/4(0.19)2=0028
1/2x4x3.142(0.075)2 = 0.035
= 0.504
Say0.50sqm.
(Rate as per item 5.9.1) sqn 1.50 119.25 59.62 (A)
(v) 6mm cement plaster 1:3 (1 Cement :3 fine
sand)-
1/2x3.142 (0.19+0.15)x0.825 =0.44 +
/4 (0-19)2 =0.028
1/2x4x3.142(0.075)2 = 0.035
= 0.504
Say 0.50sqm.
0367 Cement tonne 0.0018 4500.00 8.10
2209 Carriage of cement tonne 0.0018 47.29 0.09
0983 Fine sand cum 0.0385 320.00 12.32
2261 Carriage of fine sand cum 0.0385 53.21 2.05
Labour for mortar
751
0114 Beldar Day 0.0027 135.25 0.37

0101 Bhishti Day 0.0002 138.45 0.03
9999 Sundries L.S 0.05 1.00 0.05
Labour for plaster
0155 Mason Day 0.026 146.55 3.81
0115 Coolie Day 0.038 135.25 5.14
0101 Bhishti Day 0.046 138.45 6.37
9999 Extra for removing burr L.S 0.68 1.00 0.68
9999 Scaffolding, sundries etc. L.S 0.60 1.00 0.60
(vi) Labour for fixing
0114 Beldar Day 0.12 135.25 16.23
TOTAL 248.26
TOTAL 248.87
on all except A
Cost of each 258.15
Say 258.15
16.24 Providing and fixing precast reinforced cement concrete 1:1.5:3 (1 cement: 1.5
coarse sand : 3 graded stone aggregate 20mm nominal size) kilometre stone as
per standard design including finishing smooth in 1:3 cement mortar (1 cement:
3 fine sand) but excluding the cost of earth work, concrete in foundation, painting
and lettering etc. which shall be paid for separately.
16.24.1 35x111x25 cm size.

(i) Cement concrete 1:1.5:3 (1 cement :1.5
Coarse sand :3 graded stone aggregate 20mm
nominal size) in Kilometre stone
0.35x0.25x0.835m = 0.073
0.37x0.27x0.10m = 0.010
1/2x22/7x(0.175) x0.25m = 0.012
Total = 0.095cum
Say 0.10 cum
Rate as per item no 4.1.2 of S.H. Concrete cum 0.10 3 629.80 362.98 (A)
Work.
(ii) Extra for laying cement concrete in RCC
work
0114 Beldar Day 0.01 135.25 1.35
0101 Bhishti Day 0.02 138.45 2.77
0128 Mate Day 0.004 138.45 0.55
O.lOcum @48.06kg/cum. =4.806kg.
Say 4.81kg.
Rate as Per item No.5.22.1 of S.H.R.C.C.) kg 4.81 41.50 199.61(A)
(iv) Centering and shuttering-
(0.35+2x0.25)x0.835 = 0.710 sqm
0.35x0.25 = 0.088sqm
(0.37+2x0.27)x0.10 = 0.091sqm
2x0.37x0.01 =.0.007 sqm
752
2x2x0.25x0.01=0.010sqm
1/2x3.142/4x(0.35)2 = 0.048sqm
1/2x0.35x0.25x3.142 = 0.138sqm.
= 1. 092sqm say 1.09 sqm of
(Rate’as per item No.5.9.1 S.H.R.C.C.) sqm 1.09 119.25 129.98 (A)
sand)-
Qty. as per centering and shuttering =
1.092sqm
0.35x0.835 = 0.292sqm
0.37x0.10 = 0.037sqm
1/2x3.142/4x(0.35)2 = 0.048sqm
2x0.37x0.01 = 0.007 sqm
= 1.476 sqm Say 1.48 sqm
0367 Cement tonne 0.054 4500.00 243.00
0983 Fine sand cum 0.011 320.00 3.52
2261 Carrige of fine sand cum 0.011 53.21 0.59
Labour for mortar
0114 Beldar Day 0.008 135.25 1.08
0101 Bhishti Day 0.0007 138.45 0.10
9999 Hire and running charges of mixer L.S. 0.03 1.00 0.03
9999 Sundries L.S. 0.13 1.00 0.13
Labour for plaster
0155 Mason Day 0.075 146.55 10.99
0115 Coolie Day 0.111 135.25 15.01
0101 Bhishti Day 0.136 138.45 18.83
9999 Extra for removing burr L.S. 1.95 1.00 1.95
0114 Beldar Day 0.20 135.25 27.05
TOTAL 1,038.59
TOTAL 1,042.05
on all except A
Cost per stone 1,094.47
Say 1,094.45
16.24.2 50x152.5x25 cm size.

(i) Cement concrete 1:1.5:3 (1 cement: 1.5
nominal size)
0.50x0.25x1.145m = 0.143cum. +
0.52x0.27x0.13m = 0.018cum. +
l/2x22/7x(0.25)2x0.25m = 0.025cum.
= 0.186 cum.
Say0.19cum.
753
Rate as per item no 4.1.2 of S.H. Concrete cum 0.19 3,629.80 689.66 (A)
Work.
work
0114 Beldar Day 0.019 135.25 2.57
0101 Bhishti Day 0.038 138.45 5.26
0128 Mate Day 0.008 138.45 1.11
0.19cum @48.06kg/cum. =9.131kg.
Say 9.13 kg.
(Rate as per item No.5.22.1 of S.H.R.C.C.) kg 9.13 41.50 378.90 (A)
(0.50+2x0.25)xl.l45 = 1.145 sqm
l/2x(0.25)2 3.142 = 0.098
3.142(0.25)x0.25=0.196
(0.52+2x0.27)x0.13 =0.138
2x0.52x0.01 =0.10
2x2x0.25x0.01 =0.010
1x0.50x0.25=0.125
= 1.722sqm. Say 1.72 sqm
(Rate as per item No.5.9.1 of S.H.R.C.C.) sqm 1.72 119.25 205.11 (A)
sand)-
1.722sqm. +
0.50x1.145 = 0.572 +
0.52x0.13 ,=_0.068sqm.+
l/2x(0.25)2 x3.142 = 0.098 +
2x0.52x001 =0.010
= 2.470sqm Sq. 2.47 sqm.
0367 Cement tonne 0.009 4,500.00 40.50
0983 Fine sand cum 0.20 320.00 64.00
Labour for mortar
0114 Beldar Day 0.013 135.25 1.76
0101 Bhishti Day 0.001 138.45 0.14
9999 Sundries L.S 0.26 1.00 0.26
Labour for plaster
0155 Mason Day 0.126 146.55 18.47
0115 Coolie Day 0.185 135.25 25.02
0101 Bhishti Day 0.227 138.45 31.43
9999 Extra for removing burr L.S. 3.38 1.00 3.38
114 Beldar Day 0.20 135.25 27.05
TOTAL 1,524.93
TOTAL 1,527.44
on all except A
Cost per stone 1,565.51
Say 1,565.50
754
16.24.3 35x93.5x18 cm size.

(i) Cement concrete 1:1.5:3 (1 cement :1.5
nominal size)
0.35x0.18x0.835m = 0.0526 cum. +
0.37x0.20x0.10m = 0.0074 cum. =
0.060 cum.
Rate as per item no.4.1.2 of S.H. Concrete cum 0.06 3629.80 217.79 (A)
Work.
work
0114 Beldar Day 0.006 135.25 0.81
0101 Bhishti Day 0.012 138.45 1.66
0128 Mate Day 0.0024 138.45 0.33
0.06cum @48.06kg/cum. =2.8836 kg. Say
2.88 kg.
(Rate as per item No. 5.22.1 of S.H.R.C.C.) kg 2.88 41.50 119.52 (A)
(0.35+2x0.18)x0.835 = 0.593 sqm
(0.37+2x0.20)x0.10 = 0.077 sqm
2x0.35x0.18 = 0.126 sqm
2x0.37x0.01 =0.007sqm
2x2x0.18x0.01 =0.007sqm
= 0.810 sqm
(Rate as per item No.5.9.1 S.H.R.C.C.) sqm 0.81 119.25 96.59 (A)
(v) 6mm cement plaster 1:3(1 Cement :3 fine
sand)-
0.810sqm
0.35x0.835 = 0.292sqm
0.37x0.10 =0.037sqm
2x0.37x0.01 =0.007sqm =
1.146 sqm Say 1.15sqm
0367 Cement tonne 0.042 4500.00` 189.00
0983 Fine sand cum 0.009 320.00 2.88
Labour for mortar
0114 Beldar Day 0.006 135.25 0.81
0101 Bhishti Day 0.0006 138.45 0.08
9999 Sundries L.S 0.13 1.00 0.13
Labour for plaster
0155 Mason Day 0.058 146.55 8.50
0115 Coolie Day 0.086 135.25 11.63
755
0101 Bhishti Day 0.105 138.45 14.54

9999 Extra for removing burr L.S 1.56 1.00 1.56
0114 Beldar Day 0.10 135.25 13.52
TOTAL 697.60
TOTAL 700.24
Cost of each 740.19
Say 740.20
16.25 Surface dressing on new surface with paving bitumen of grade A -90/S-90 of approved
quality using 2.25 Kg of bitumen per sqm with 1.65 cum of stone chippings 13.2 mm
nominal size per 100 sem of road surface including consolidation with road roller of
6 to 8 tonne capacity etc. complete:

Bitumen [email protected] per sqm. =225 kg =
0.225 tonne.
0309 Bitumen S-90 @ 2.25kg per sqm. =225kg. = tonne 0.225 22 500.00 5 062.50
0.225tonne
2211 Carriage of bitumen tonne 0.225 53.21 11.97
Stone aggregate 13.2mm nominal size
@1.65cum. per lOOsqm.
2910 Stone chippings 13.2mm cum 1.65 700.00 1 155.00
2202 Carriage of stone aggregate cum 1.65 53.21 87.80
0370 Steam coal for heating bitumen @2 qunital per quintal 0.45 300.00 135.00
tonne of bitumen = 2x0.225=0.450q
2200 Carrige of steam coal tonne 0.045 60.81 2.74
Labour for cleaning the road surface, heating
and spraying bitumen and aggregate
(a) For cleaning:
0128 Mate Day 0.11 138.45 15.23
0114 Beldar Day 1.40 135.25 189.35
0115 Coolie Day 1.40 135.25 189.35
(b) For heating and spraying bitumen :
0130 Mistry Day 0.08 151.50 12.12
0138 Spray man Day 0.11 138.45 15.23
0114 Beldar Day 0.93 135.25 125.78
(c) For screening and spreading aggregate :
0128 Mate Day 0.11 138.45 15.23
0114 Beldar Day 0.93 135.25 125.78
0115 Coolie Day 1.55 135.25 209.64
(d) Consolidation Charges
0113 Chowkidar (at barriers for night watch and for Day 0.27 135.25 36.52
road roller)
0101 Bhishti Day 0.11 138.45 15.23
0001 Hire charges for boiler Day 0.12 595.00 71.40
0007 Hire charges for tar sprayer unit Day 0.11 250.00 27.50
756
(e) Misc:
0364 Brushes etc. for cleaning, Wire bursh (with each 0.11 15.00 1.65
thick wire)
0365 Soft brush each 0.32 12.00 3.84
9999 Brooms and gunny bags L.S. 6.76 1.00 6.76
9999 Sundries L.S. 6.76 1.00 6.76
TOTAL 7,695.61
TOTAL 7,772.57
Cost for 100 Sqm. 8,938.46
Cost per Sqm. 89.38
Say 89.40
16.26 Surface dressing on new surface in two coats with bitumen of grade A-90/S-90 of
approved quality using 1.8kg.of bitumen per sqm with 1.5cum of stone chippings
13.2mm nominal size per 100 sqm of road surface for first coat and 1.1kg. of bitumen
per sqm. with 1.00 cu. metre of stone chippings 11.2mm nominal size per 100 sqm.
of road surface for second coat including consolidation of each coat separately
with road roller of 6 to 8 tonne capacity etc. complete.

0309 Bitumen S-90/A-90 @ tonne 0.18 22,500.00 4,050.00
1.8kg/sqm.=180kg.=0.18 tonne
2910 Stone chippings 13.2mm nominal size cum 1.50 700.00 1,050.00
@1.5cum. per lOOsqm.
tonne
2200 Carriage of steam coal tonne 0.036 60.81 2.19
(a) For cleaning:
0128 Mate Day 0.11 138.45 15.23
0114 Beldar Day 1.40 135.25 189.35
0115 Coolie Day 1.40 135.25 189.35
0130 Mistry Day 0.08 151.50 12.12
0138 Sprayman Day 0.11 138.45 15.23
0114 Beldar Day 1.38 135.25 186.64
0128 Mate Day 0.27 138.45 37.38
0114 Beldar Day 0.85 135.25 114.96
0115 Coolie Day 0.85 135.25 114.96
0113 Chowkidar Day 0.11 135.25 14.88
0101 Bhishti Day 0.11 138.45 15.23
0003 Hire charges of road roller Day 0.11 1,000.00 110.00
757
1235 Diesel for road roller @ 18 litres/day litre 2.00 30.25 60.50
(e) Misc:
thick wire)
0365 Soft brush each 0.32 12.00 3.84
9999 Sundries L.S. 16.38 1.00 16.38
Second Coat
0309 Bitumen S-90/A-90 @ 1.10kg per tonne 0.11 22,500.00 2,475.00
sqm.= l 10kg.=0.11 tonne
2911 Stone chippings 10mm/11.2mm cum 1.00 700.00 700.00
tonne of bitumen
(a) For cleaning and brushing loose chips:
0128 Mate Day 0.06 138.45 8.31
0115 Coolie Day 0.97 135.25 131.19
0130 Mistry Day 0.05 151.50 7.58
0138 Sprayman Day 0.07 138.45 9.69
0114 Beldar Day 0.75 135.25 101.44
0128 Mate Day 0.07 138.45 9.69

0114 Belder Day 0.62 135.25 83.86
0115 Coolie Day 0.62 135.25 83.86
0113 Chowkidar(at barrier for night watch and for Day 0.15 135.25 20.29
road roller)
0101 Bhishti Day 0.06 138.45 8.31

0001 Hire charges of boiler Day 0.06 595.00 35.70
(e) Misc:
thick wire)
0365 Soft brushes each 0.09 12.00 1.08
9999 Sundries L.S. 9.49 1.00 9.49
TOTAL 10,429.62
TOTAL 10,533.92
Cost for two coats per 100 sqm. 12,114.01
Cost per Sqm. 121.14
Say 121.15
758
16.27 : Surface dressing on old surface with hot bitumen of grade A-90/ S-90 of approved
quality using 1.95 kg of bitumen per sqm. with 1.50 cum of stone chippings 11.2
mm nominal size per 100 sqm of road surface including consolidation with road
roller of 6 to 8 tonne capacity, etc. complete.
Material:
0309 Bitumen 1.95kg./sqm.= 195kg. or 0.195t tonne 0.195 22,500.00 4,387.50
2911 Stone chippings 11.2mm nominal size @ cum 1.50 700.00 1,050.00
1.50cum. per 100 sqm.
0370 Steam coal for heating bitumen @2 quintal per quintal 0.39 300.00 117.00
tonne of bitumen
and spraying bitumen and aggregate etc.
(a) For cleaning:
0128 Mate Day 0.06 138.45 8.31
0114 Beldar Day 0.49 135.25 66.27
0115 Coolie Day 0.97 135.25 131.19
0130 Mistry Day 0.05 151.50 7.58
0138 Sprayman Day 0.06 138.45 8.31
0114 Beldar Day 0.69 135.25 93.32
0128 Mate Day 0.66 138.45 91.38
0114 Beldar Day 0.51 135.25 68.98
0115 Coolie Day 0.51 135.25 68.98
0113 Chowkidar Day 0.15 135.25 20.29
0101 Bhishti Day 0.06 138.45 8.31
0007 Hire charges for tar sprayer Day 0.06 250.00 15.00
(e) Misc:
thick wire)
0365 Soft brush each 0.12 12.00 1.44
9999 Sundries L.S. 5.33 1.00 5.33
TOTAL 6,375.04
TOTAL 6,438.79
Cost for 100 sqm. 7,404.61
Cost per Sqm. 74.05
Say 74.05
759
16.28 Surface dressing one coat on new surface with bitumen of specified grade at a
rate of 1.95 kg/sqm. of surface area with 1.5 cum. of stone chippings 13.2 mm
nominal size per 100 sqm. of road surface including consolidation with road
roller of 6 to 8 tonne capacity , etc. complete :
16.28.1 Using bitumen emulsion (minimum 50% bitumen content - RS grade conforming
to IS : 8887).
Details of cost for 100 sqm,
0310 Bitumen emulsion tonne 0.195 19,500.00 3,802.50
2910 Stone chippings 13.2mm @1.50 cum. per 100 cum 1.50 700.00 1,050.00
sqm. = 1.50cum.
and spraying bitumen and aggregate :
(a) For cleaning:
0128 Mate Day 0.11 138.45 15.23
0114 Beldar Day 1.40 135.25 189.35
0115 Coolie Day 1.40 135.25 189.35
(b) For Spraying bitumen emulsion :
0130 Mistry Day 0.07 151.50 10.60
0 138 Sprayman Day 0.10 138.45 13.84
0114 Beldar Day 1.00 135.25 135.25
0128 Mate Day 0.11 138.45 15.23
0114 Beldar Day 0.85 135.25 114.96
0115 Coolie Day 0.85 135.25 114.96
0113 Chowkidar Day 0.27 135.25 36.52
0101 Bhishti Day 0.27 138.45 37.38
(e) Misc:
thick wire)
0365 Soft brush each 0.32 12.00 3.84
9999 Sundries L.S. 9.49 1.00 9.49
TOTAL 6,035.34
TOTAL 6,095.69
Cost for 100 sqm. 7,010.04
Cost per Sqm. 70.10
Say 70.10
760
16.29 Surface dressing one coat on old surface with bitumen of specified grade at the
rate of 1.22 kg/ sqm of surface area with 1.10 cum of stone chippings 11.2 mm
nominal size per 100 sqm. of road surface including consolidation with road
roller of 6 to 8 tonne capacity etc. complete :
16.29.1 Using bitumen emulsion (minimum 50% bitumen content - RS grade conforming
to IS : 8887).

0310 Bitumen emulsion @1.22 kg per Sqm. =122 tonne 0.122 19,500.00 2,379.00
kg. or 0.122 tonne
2211 Carriage of bitumen emulsion tonne 0.122 53.21 6.49
2911 Stone chippings 11.2mm nominal size @ cum 1.10 700.00 770.00
2202 Carriage of stone chippings cum 1.10 53.21 58.53
(a) For cleaning:
0128 Mate Day 0.06 138.45 8.31
0114 Beldar Day 0.49 135.25 66.27
0115 Coolie Day 0.97 135.25 131.19
(b) For Spraying bitumen emulsion :
0130 Mistry Day 0.05 151.50 7.58
0138 Sprayman Day 0.06 138.45 8.31
0114 Beldar Day 0.63 135.25 85.21
0128 Mate Day 0.07 138.45 9.69

0114 Beldar Day 0.62 135.25 83.86
0115 Coolie Day 0.62 135.25 83.86
0113 Chowkidar Day 0.15 135.25 20.29

0101 Bhishti Day 0.15 138.45 20.77
(e) Misc:
0364 Brushes etc. for cleaning, Wire brush (with each 0.11 15.00 1.65
thick wire)
0365 Soft brush each 0.32 12.00 3.84
9999 Sundries L.S. 5.33 1.00 5.33
TOTAL 3,862.01
TOTAL 3,900.63
Cost for 100 sqm. 4,485.72
Cost per Sqm. 44.86
Say 44.85
761
16.30 Providing and applying tack coat using hot straight run bitumen of grade 80/ 100
including heating the bitumen, spraying the bitumen with mechanically operated
spray unit fitted on bitumen boiler, cleaning and preparing the existing road
surface as per specifications :
16.30.1 On W.B.M. @ 0.75 Kg / sqm.
Details of cost for 100.00sqm

2916 Bitumen 80/100 tonne 0.075 22,500.00 1,987.50
0370 Steam coal quintal 0.15 300.00 45.00
Materials for cleaning the road surface :
0364 Wire brush (with thick wire) each 0.05 15.00 0.75
0365 Soft brush each 0.12 12.00 1.44
9999 Gunny bags L.S. 7.80 1.00 7.80
0007 Spray unit Day 0.03 250.00 7.50
9999 Sundries L.S. 9.10 1.00 9.10
Labour:
(a) For cleaning:
0128 Mate Day 0.06 138.45 8.31
0114 Beldar Day 1.46 135.25 197.46
(b) For heating bitumen:
0114 Beldar Day 0.19 135.25 25.70
(c) For applying tack coat:
0114 Beldar Day 0.47 135.25 63.57
TOTAL 2,059.03
TOTAL 2,079.62
Cost for 100 sqm. 2,391.56
Cost per Sqm. 23.92
Say 23.90
16.30 Providing and applying tack coat using hot straight run bitumen of grade 80/100
including heating bitumen, spraying the bitumen with mechanically operated
spray unit fitted on bitumen boiler, cleaning and preparing the existing road
surface as per specifications :
16.30.2 On bituminous surface @ 0.50 Kg/sqm.
Details of cost for 100.00sqm

2916 Bitumen 80/100 tonne 0.05 22,500.00 1,125.00
0365 Soft brush each 0.12 12.00 1.44
9999 Gunny bags L.S. 7.80 1.00 7.80
0007 Spray unit Day 0.03 250.00 7.50
9999 Sundries L.S. 7.80 1.00 7.80
Labour:
(a) For cleaning:
0128 Mate Day 0.06 138.45 8.31
0114 Beldar Day 1.46 135.25 197.46
762

0114 Beldar Day 0.19 135.25 25.70
0114 Beldar Day 0.47 135.25 63.57
TOTAL 1,478.60
TOTAL 1,493.39
Cost for 100 sqm. 1,717.40
Cost per Sqm. 17.17
Say 17.15
16.31 Providing and applying tack coat using bitumen emulsion (Rapid Setting)
complying with IS 8887-1995, spraying the bitumen emulsion with mechanically
operated spray unit, cleaning and preparing the existing road surface as per
specifications:
16.31.1 On W.B.M @ 0.4kg/sqm.

7382 bitumen emulsion (R.S.) tonne 0.04 32,000.00 1,280.00
0365 Soft brush each 0.12 12.00 1.44
9999 Gunny bags L.S. 7.80 1.00 7.80
0007 Spray unit Day 0.03 250.00 7.50
9999 Sundries L.S. 9.10 1.00 9.10
Labour:
(a) For cleaning:
0128 Mate Day 0.06 138.45 8.31
0114 Beldar Day 1.46 135.25 197.46
0114 Beldar (0.47/0.075)x0.04=0.25 Day 0.25 135.25 33.81
TOTAL 1,548.30
TOTAL 1,563.78
Cost for 100 sqm. 1,798.35
Cost per Sqm. 17.98
Say 18.00
16.31 Providing and applying tack coat using bitumen emulsion (Rapid Setting)
complying with IS 8887-1995, spraying the bitumen emulsion with mechanically
operated spray unit, cleaning and preparing the existing road surface as per
specifications:
16.31.2 On bituminous surface @ 0,25kg/sqm.

7382 bitumen emulsion (R.S.) tonne 0.025 32,000.00 800.00
763

0365 Soft brush each 0.12 12.00 1.44
9999 Gunny bags L.S. 7.80 1.00 7.80
0007 Spray unit Day 0.03 250.00 7.50
9999 Sundries L.S 7.80 1.00 7.80
Labour:
(a) For cleaning:
0128 Mate Day 0.061 138.45 8.31
0114 Beldar Day 1.46 135.25 197.46
0114 Beldar (0.47/0.050)x0.025=0.235 Day 0.235 135.25 31.78
TOTAL 1,064.17
TOTAL, 1,074.81
Cost for 100 sqm. 1,236.03
Cost per Sqm. 12.36
Say 12.35
16.32 2 cm premix carpet surfacing with 1.8 cum and 0.90 cum of stone chippings of
13.2 mm size and 11.2 mm size respectively per 100 sqm. and 52 kg. and 56 kg. of
hot bitumen per cum of stone chippings of 13.2 mm and 11.2 mm size respectively
including a tack coat with hot straight run bitumen including consolidation with
road roller of 6 to 9 tonne capacity etc. complete: (tack coat to be paid for
separately).
16.32.1 With paving Asphalt 80/100 heated and then mixed with solvent at the rate of 70
grams per kg of asphalt.
Asphalt 80/100
(i) Hot bitumen @52kg.per cum. of stone
chippings 1.8cum. of 13.2mm nominal size
chippings.
(ii) Hot bitumen @56kg. per cum. of stone
chippings.
2916 Bitumen :52xl.8+56x0.9=144kg. or 0.144 tonne 0.144 22,500.00 3,240.00
tonne.
2914 Solvent 70gms/kg. for 0.144 t = 10.08kg. kilogram 10.08 18.00 181.44
2342 Carriage of solvent quintal 0.10 5.32 0.53
@1.80cum. per 100 sqm.
2911 Stone chippings 11.2mm nominal size cum 0.90 700.00 630.00
0370 Steam coal for heating bitumen @ 2 qunitals quintal 0.288 300.00 86.40
per tonne of bitumen = 2x0.144=0.288q
764

(a) For cleaning:
0 128 Mate Day 0.08 138.45 11.08
0114 Beldar Day 1.40 135.25 189.35
0115 Coolie Day 1.40 135.25 189.35
0114 Beldar Day 0.57 135.25 77.09
(c) For screening and spreading premixed
aggregate :
0130 Mistry Day 0.19 151.50 28.78
0114 Beldar Day 5.00 135.25 676.25
road roller)
0101 Bhishti Day 0.11 138.45 15.23
9999 Carriage of diesel L.S 2.73 1.00 2.73
0013 Hire charges for mixer Day 0.04 200.00 8.00
(e) Misc:
thick wire)
0365 Soft brush each 0.32 12.00 3.84
9999 Sundries L.S. 9.49 1.00 9.49
TOTAL 7,055.42
TOTAL 7,125.97
Cost for 100 sqm. 8,194.87
Cost per Sqm 81.95
Say 81.95
separately).
16.32.2 With paving Asphalt 60/70 with no solvent

Asphalt 60/70
chippings.
chippings.
7309 Bitumen :52xl.8+56x0.9=144kg. or 0.144 tonne 0.144 23,200.00 3,340.80
tonne.
765

@1.80cum. per 100sqm.
0370 Steam coal for heating of bitumen @2 quintals quintal 0.288 300.00 86.40
per tonne of bitumen =2x0.144=0.288q
(a) For cleaning:
0128 Mate Day 0.08 138.45 11.08
0114 Beldar Day 1.40 135.25 189.35
0115 Coolie Day 1.00 135.25 189.35
0114 Beldar Day 0.57 135.25 77.09
aggregate :
0130 Mistry Day 0.19 151.50 28.78
0114 Beldar Day 5.00 135.25 676.25
road roller)
0101 Bhishti Day 0.11 138.45 15.23
(e) Misc:
thick wire)
0365 Soft brush each 0.32 12.00 3.84

9999 Sundries L.S. 9.49 1.00 9.49
TOTAL 6,974.25
TOTAL 7,043.99
Cost for 100 sqm. 8,100.59
Cost per Sqm. 81.01
Say 81.00
separately).
16.32.3 With Refinery Modified Bitumen CRMB 55 conforming to IRC : SP : 53-1999.

Asphalt 80/100
766

chippings.
chippings.
7739 Modified Bitumen CRMB - 55 (Refinary tone 0.144 2,6000.00 3,744.00
produced) :52xl.8+56x0.9=144kg. or 0.144
tonne.
2211 Carriage of bitumen tone 0.144 53.21 7.66
2914 Solvent 70gms/kg. for 0.144 t = 10.08kg. Kilogram 10.08 18.00 181.44
0370 Steam coal for heating bitumen @ 2 quintals quintal 0.288 300.00 86.40
(a)For cleaning:
0128 Mate Day 0.08 138.45 11.08
0114 Beldar Day 1.40 135.25 189.25
0115 Coolie Day 1.40 135.25 189.35
(b)For heating bitumen:
0114 Beldar Day 0.57 135.25 77.09
(c)For screening and spreading premixed
aggregate :
0130 Mistry Day 0.19 151.50 28.78
0114 Beldar Day 5.00 135.25 676.25
(d)Consolidation Charges
road roller)
0101 Bhishti Day 0.11 138.45 15.23
1235 Diesel for road roller @ 18 litres per day liter 2.00 30.25 60.50
(e)Misc:
thick wire)
0365 Soft brush each 0.32 12.00 3.84
9999 Sundries L.S. 9.49 1.00 9.49
TOTAL 7,559.42
TOTAL 7,635.01
Cost for 100 sqm 8,780.26
cost per sqm 87.80
Say 87.80
767
16.33 2.5 cm premix carpet surfacing with 2.25 cum and 1.12 cum of stone chippings
of 13.2mm and 11.2mm size respectively per 100 sqm. and 52 kg. and 56 kg. of
road roller of 6 to 9 tonne capacity etc. complete, (tack coat to be paid for
separately):
Paving Asphalt 80/100'
chippings @2.25cum. of 13.2mm nominal size
chippings.
(ii) Hot bitumen @56kg. per cum. of
aggregate @ 1.12cum. of 11.2mm nominal
size.
2916 Bitumen :52x2.25+56x1.12= 180kg. tonne 0.18 2,2500.00 4,050.00
2914 Solvent 0.07x180=12.60kg. kilogram 12.60 18.00 226.80
2202 Carriage of aggregate 2.25+1.12=3.37 cum. cum 3.37 53.21 179.32
(a) For cleaning:
0128 Mate Day 0.08 138.45 11.08
0114 Beldar Day 1.40 135.25 189.35
0115 Coolie Day 1.40 135.25 189.35
0114 Beldar Day 0.71 135.25 96.03
aggregate :
0130 Mistry Day 0.19 151.50 28.78
0114 Beldar Day 6.25 135.25 845.31
0113 Chowkidar Day 0.27 135.25 36.52
0101 Bhishti Day 0.11 138.45 15.23
(e) Misc:
thick wire)
0365 Soft brush each 0.32 12.00 3.84
9999 Sundries L.S. 9.49 1.00 9.49
TOTAL 8,639.43
768

TOTAL 8,725.82
Cost for 100 sqm. 10,034.69
Say 100.35
16.33 2.5 cm premix carpet surfacing with 2.25 cum and 1.12 cumof stone chippings of
13.2mm and11.2mm size respectively per 100 sqm. and 52 kg. and 56 kg. of hot
bitumen per cum of stone chippings of 13.2 mm and 11.2 mm size respectively
road roller of 6 to 9 tonne capacity etc complete, (tack coat to be paid for
separately):
16.33.2 With paving Asphalt 60/70 with no solvent
Paving Asphalt 60/70
aggregate @ 1.12cum. of 11.2mm nominal size
7309 Bitumen :52x2.25+50xl. 12= 180kg tonne 0.18 23,200.00 4,176.00
(a) For cleaning :
0128 Mate Day 0.08 138.45 11.08
0114 Beldar Day 1.40 135.25 189.35
0115 Coolie Day 1.40 135.25 189.35
0114 Beldar(1.05x0.18)/0.267 = 0.71 nos. Day 0.71 135.25 96.03
(c) For cleaning, mixing and spreading
pre-mix aggregate :
0130 Mistry Day 0.19 151.50 28.78
0114 Beldar Day 6.25 135.25 845.31
0113 Chowkidar Day 0.27 135.25 36.52

0101 Bhishti Day 0.11 138.45 15.23
0013 Hire charges of mixer Day 0.04 200.00 8.00
(e) Misc:
thick wire)
769

0365 Soft brush each 0.32 12.00 3.84
9999 Sundries L.S. 9.49 1.00 9.49
TOTAL 8,537.96
TOTAL 8,623.34
Cost for 100 sqm. 9,916.84
Cost per Sqm. 99.17
Say 99.15
16.33 2.5 cm premix carpet surfacing with 2.25 cum and 1.12 cum of stone chippings
of 13.2mm and 11.2mm size respectively per 100 sqm. and 52 kg. and 56 kg. of
road roller of 6 to 9 tonne capacity etc. complete, (tack coat to be paid for
separately):
Paving Asphalt 80/100
chippings.
(ii) Hot bitumen @56kg. per cum. of
aggregate @1.12cum. of 11.2mm nominal
size.
7739 Modified Bitumen CRMB - 55 (Refinery tonne 0.18 26,000.00 4,680.00
produced) :52x2.25+56xl.l2=180kg.
2914 Solvent 0.07x180=12.60kg. kilogram 12.60 18.00 226.80
@2.25 cum. per 100sqm.
@1.12 cum. per lOOsqm.
(a)For cleaning:
0128 Mate Day 0.08 138.45 11.08
0114 Beldar Day 1.40 135.25 189.35
0115 Coolie Day 1.40 135.25 189.35
(b)For heating bitumen:
0114 Beldar Day 0.71 135.25 96.03
(c)For screening and spreading premixed
aggregate :
0130 Mistry Day 0.19 151.50 28.78
0114 Beldar Day 6.25 135.25 845.31
(d)Consolidation Charges
770

0113 Chowkidar Day 0.27 135.25 36.52
0101 Bhishti Day 0.11 138.45 15.23
(e) Misc:
thick wire)
0365 Soft brush each 0.32 12.00 3.84
9999 Sundries L.S. 9.49 1.00 9.49
TOTAL 9,269.43
TOTAL 9,362.12
Cost for 100sqm. 10,766.44
Say 107.65
16.34 2 cm premix carpet surfacing with 2.4cum of stone chippings 11.2 mm nominal
size per 100 sqm and bitumen emulsion (medium setting min. 65% bitumen
content) complying with IS : 8887-1995 using 96kg per cum of chipping including
consolidation with road roller of 6 to 9 tonne capacity etc. complete.

Bitumen emulsion M.S. @96kg per cum. of
aggregate
7742 96x2.4=230kg =0.230t tonne 0.23 19,500.00 4,485.00
2911 Stone aggregate 11.2mm nominal size @ cum 2.40 700.00 1,680.00
Labour
(a)For mixing and spreading premix aggregate :
0130 Mistry Day 0.19 151.50 28.78
0114 Beldar Day 3.54 135.25 478.78
(b) Consolidation Charges
0113 Chowkidar Day 0.27 135.25 36.52
0101 Bhishti Day 0.11 138.45 15.23
0013 Hire charges of mixer Day 0.04 200.00 8.00
9999 Sundries L.S. 9.49 1.00 9.49
TOTAL 7,054.97
TOTAL 7,125.52
Cost for 100 sqm. 8,194.35
Cost per Sqm. 81.94
Say 81.95
771
16.35 2.5 cm premix carpet surfacing with 3 cum of stone chippings 10 mm nominal
size per 100 sqm and bitumen emulsion (medium setting min. 65% bitumen
contents) complying with IS : 8887-1995 using 96 kg per cum of chippings of
road surface including consolidation with road roller etc complete
Details of cost for 100.00sqm.
Bitumen emulsion M.S. @96kg per cum. of
aggregate
7742 96x3 = 288 kg = 0.2881 tonne 0.288 19,500.00 5,616.00
2911 Stone aggregate 10 mm nominal size @ cum 3.00 700.00 2,100.00
3.00 cum. per 100 sqm.
Labour
(a)For mixing and spreading premix
aggregate:
0130 Mistry Day 0.19 151.50 28.78
0114 Beldar Day 4.10 135.25 554.52
(b)Consolidation Charges
0113 Chowkidar Day 0.27 135.25 36.52
0101 Bhishti Day 0.11 138.45 15.23
9999 Sundries L.S. 9.49 1.00 9.49
TOTAL 8,708.72
TOTAL 8,795.81
Add 15%for contractor’s profit and overheads 1,319.37
Cost for 100 sqm. 10,115.18
Say 101.15
16.36 Providing and laying Bitumen Penetration Macadam with hard stone aggregate
of quality, size and grading as specified, with bitumen of suitable penetration
grade including required key aggregate as specified, spreading coarse aggregate
with the help of self propelled / tipper tail mounted aggregate spreader and
applying bitumen by a pressure distributor and then spreading key aggregate
with the help of aggregate spreader complete including consolidation with road
roller of minimum 8 to 10 tonne capacity to achieve specified values of compaction
and surface accuracy :
16.36.1 For 50mm compacted thickness using coarse aggregate of size 50-20 mm graded
@ 0.60 cum per 10 sqm key aggregate of size 12.5 mm graded @ 0.15 cum per 10
sqm. With paving asphalt 80/100 @ 50 kg/10 sqm.
772

(A) Material:
Taking 40mm = 45%
20mm = 44%
11.2mm = 8%
Stone dust = 3%
0293 Stone aggregate 40mm (one size) cum 9.99 650.00 6,493.50
0297 Stone aggregate 11.2mm (one size) cum 1.78 700.00 1,246.00
1159 Stone dust cum 0.60 700.00 420.00
Key aggregate
1159 Stone dust cum 0.56 700.00 392.00
2206 Carriage of stone aggregate 40mm cum 9.99 57.83 577.72
2202 Carriage of stone aggregate 13.2/11.2mm cum 4.44 53.21 236.25
2267 Carriage of stone dust. cum 1.16 53.21 61.72
Bitumen 80/100 @ 50kg/10 sqm.
2916 Bitumen 80/100 grade tonne 1.85 22,500.00 41,625.00
(B) Labour:
0114 Beldar for spreading stone metal Day 16.67 135.25 2,254.62
0114 Beldar for hand packing Day 5.33 135.25 720.88
0114 Beldar dry rolling Day 2.67 135.25 361.12
0114 Bajri spreader Day 1.33 135.25 179.88
0138 Sprayer Day 0.67 138.45 92.76
0114 Beldar for spreading key aggregate Day 1.33 135.25 179.88
0114 Beldar for spraying bitumen Day 6.67 135.25 902.12
0114 Beldar of power roller Day 0.67 135.25 90.62
0128 Mate Day 1.77 138.45 245.06
(C) Machinery :
0001 Bitumen boiler oil fed capacity 1500 lit with Day 0.45 595.00 267.75
spray unit
0003 Road roller (8 to 10 tonne) Day 0.61 1,000.00 610.00
9999 Misc. items as spray nozzle, joint paper, L.S. 351.00 1.00 351.00
coconut oil, country soap etc.
(D) Fuel:
(i) Diesel for boiler @ 10 litres per hour =
40.00 lit +
(ii) Diesel for road roller @ 18 litt./day =
18x0.61 = 10.98 lit.
1235 Total = 50.98 lit. litre 50.98 30.25 1,542.14
TOTAL 69,994.37
TOTAL 70,694.31
Cost for 370 Sqm. 81,298.46
Say 219.75
773
16.36 Providing and laying Bitumen Penetration Macadam with hard stone aggregate of
quality, size and grading as specified, with bitumen of suitable penetration grade
including required key aggregate as specified, spreading coarse aggregate with
the help of self propelled / tipper tail mounted aggregate spreader and applying
bitumen by a pressure distributor and then spreading key aggregate with the help
of aggregate spreader complete including consolidation with road roller of
minimum 8 to 10 tonne capacity to achieve specified values of compaction and
surface accuracy :
16.36.2 For 75 mm compacted thickness in two layers using stone aggregate of size 63-41
mm graded @ 0.90 cum per 10 sqm key aggregate of size 20.0 mm graded @ 0.18
cum per 10 sqm. With paving asphalt 80/100 @ 68 kg/10 sqm.

(A)Material:
Taking output as 300 sqm. for single layer.
Coarse agg. = 300/10x0.90 = 27 cum.
Key agg = 300/10x0.18 = 5.4 cum.
Bitumen = 300/10x68 = 2.04 t.
Key aggregate
0297 Stone aggregate 10mm (one size) cum 0.81 700.00 567.00
2916 Bitumen 80/100 tonne 2.04 22,500.00 45,900.00
2202 Carriage of aggregate cum 32.40 53.21 1,724.00
(B) Labour:
0114 Beldar for spreading stone metal Day 25.00 135.25 3,381.25
0114 Beldar for hand packing Day 8.00 135.25 1,082.00
0114 Beldar dry rolling Day 4.00 135.25 541.00
0114 Beldar/Bajri spreader Day 2.00 135.25 270.50
0138 Sprayer Day 1.00 138.45 138.45
0114 Beldar for spreading key aggregate Day 2.00 135.25 270.50
0114 Beldar for spraying bitumen Day 10.00 135.25 1,352.50
0114 Beldar road roller Day 1.00 135.25 135.25
0128 Mate Day 2.65 138.45 366.89
(C) Machinery :
0001 (i) Bitumen boiler oil fed capacity 1500 lit with Day 0.50 595.00 297.50
spray unit
0003 (ii) Road roller (8 to 10 tonne) Day 0.75 1,000.00 750.00

9999 Misc. items as spray nozzle, joint paper, L.S. 429.00 1.00 429.00
coconut oil, country soap etc.
(D) Fuel:
(i) Diesel for boiler @ 10 litres per hour =
40.00 lit
(ii) Diesel for road roller @ 18 lit./day =
18x0.75 = 13.50 lit.
1235 Total = 53.50 lit. litre 53.50 30.25 1,618.38
TOTAL 80,481.08
TOTAL 81,285.89
774

Cost for 300 Sqm. 93,478.77
Say 311.60
16.37 Providing and laying bitumen mastic wearing course (as per specifications) with
industrial bitumen of grade 85/25 conforming to IS : 702 prepared by using mastic
cooker and laid to required level and slope including providing antiskid surface
with bitumen precoated fine grained hard stone chipping of approved size at the
rate of 0.005 cum per 10 sqm and at approximate spacing of 10cm centre to centre
in both directions, pressed into surface protruding 1mm to 4mm over mastic
surface, including cleaning the surface, removal of debris etc. all complete.
(Considering bitumen using 10.2% as per MORTH specification.)
16.37.1 25mm thick.
Details of cost for surface area of 17.40 sqm
for single layer of 25 mm finished thickness.
Materials:
Taking wearing coat as 1 tonne and density as
2.3 gm/c.c Volume of bitumen mastic =
1000/2300= 0.435 cum surface area =
0.435/0.025 = 17.4 sqm.
0313 (i) Bitumen of penetration 85/25 @ 10.2% by tonne 0.102 25,000.00 2,550.00
weight of mix
(ii) Weight of coarse aggregate @ 40% (1000
- 150) x 40/100 = 340 kg.
Stone aggregate : 340/43.38x0.0283 = 0.222
cum.
0295 Stone Aggregate 20 mm. cum 0.02 700.00 14.00
0296 Stone Aggregate 12.5mm cum 0.202 700.00 141.40
(iii) Weight of fine aggregate @ 15%
850x15/100 = 127.5 kg., volume of fine
aggregate: 127.5/43.103x0.0283 =0.083 cum
1159 Fine aggregate. cum 0.083 700.00 58.10
(iv) Weight of lime stone dust @ 45%
(850-340-127.5) = 382.50 kg., Volume of lime
stone dust 382.50/2200 =0.174 cum.
0784 Lime aggregate. cum 0.174 800.00 139.20
(v) Precoated stone chipping for surface
finish: Volume of chips @ 0.005 cum/10
sqm=17.4x0.005/10 = 0.0087 cum say 0.009
cum
0297 Chips aggregate. cum 0.009 700.00 6.30
Bitumen for precoated stone chipping @ 2%
=0.009x1600x2/100= 0.288 say 0.30 kg.
0313 Bitumen 85/25 tonne 0.0003 25,000.00 7.50
2202 Carriage of Stone aggregate (0.222 + 0.009) cum 0.231 53.21 12.29
=0.231 cum.
2367 Carriage of fine aggregate. cum 0.083 53.21 4.42
2208 Carriage of Lime dust. cum 0.174 53.21 9.26
1235 Diesel for mastic cooker (Taking capacity of litre 100.00 30.25 3,025.00
cooker as one tonne)
Labour:
775
0139 Skilled Beldar. Day 1.50 138.45 207.68

0130 Mistry Day 0.50 151.50 75.75
0138 Sprayer Day 3.50 138.45 484.58
0139 Skilled Beldar for surface finish. Day 0.250 138.45 34.61
0128 Mate Day 0.50 138.45 69.22
0016 Hire/ running charges of mastic cooker Day 0.50 515.00 257.50
9999 sundries (Sealing of joints, placing angles, L.S. 153.27 1.00 153.27
wastage materials)
Total 7,392.03
Total 7,465.95
Add 15% for contractor’s profit and 1,119.89
overheads.
Cost for 17.40 sqm 8,585.84
Cost per sqm 493.44
Say 493.45
16.37 Providing and laying bitumen mastic wearing course (as per specifications) with
industrial bitumen of grade 85/25 conforming to IS : 702 prepared by using mastic
cooker and laid to required level and slope including providing antiskid surface
with bitumen precoated fine grained hard stone chipping of approved size at the
rate of 0.005 cum per 10 sqm and at approximate spacing of 10cm centre to centre
in both directions, pressed into surface protruding 1mm to 4mm over mastic
surface, including cleaning the surface, removal of debris etc. all complete.
(Considering bitumen using 10.2% as per MORTH specification .)
16.37. 2 40 mm thick

Details of cost for surface area of 10.875sqm
for single layer of 40 mm finished thickness.
Materials:
Taking wearing coat as 1 tonne and density as
2.3 gm/c.c Volume of bitumen mastic =
1000/2300= 0.435 cum
Surface Area=0,435/0.040 = 10.875 sqm.
0313 (i) Bitumen of penetration 85/25 @ 10.2% by tonne 0.102 25,000.00 2,550.00
weight of mix
(ii) Weight of coarse aggregate @ 40% (1000
- 150) x 40/100 = 340 kg.
Stone aggregate : 340/43.38x0.0283 = 0.222
cum.
0295 Stone Aggregate 20 mm. cum 0.02 700.00 14.00
0296 Stone Aggregate 12.5mm cum 0.202 700.00 141.40
(iii) Weight of fine aggregate @ 15%
850x15/100 = 127.5 kg., volume of fine
aggregate: 127.5/43.103x0.0283 =0.083 cum
1159 Fine aggregate. cum 0.083 700.00 58.10
(iv) Weight of lime stone dust @ 45%
(850-340-127.5) = 382.50 kg., Volume of lime
stone dust 382.50/2200 =0.174 cum.
0784 Lime aggregate. cum 0.174 800.00 139.20
(v) Precoated stone chipping for surface
finish: Volume of chips @ 0.005 cum/10
sqm=17.4x0.005/10 = 0.0087 cum say 0.009
cum
776
0297 Chips aggregate. cum 0.009 700.00 6.30

Bitumen for precoated stone chipping @ 2%
=0.009x1600x2/100= 0.288 say 0.30 kg.
0313 Bitumen 85/25 tonne 0.0003 25,000.00 7.50
2202 Carriage of Stone aggregate (0.222 + 0.009) cum 0.231 53.21 12.29
=0.231 cum.
2267 Carriage of fine aggregate. cum 0.083 53.21 4.42
2208 Carriage of Lime dust. cum 0.174 53.21 9.26
Diesel for mastic cooker
1235 (Taking capacity of cooker as one tonne) litre 100.00 30.25 3,025.00
Labour:
0139 Skilled Beldar. Day 1.50 138.45 207.68
0130 Mistry Day 0.50 151.50 75.75
0138 Sprayer Day 3.50 138.45 484.58
0139 Skilled Beldar for surface finish. Day 0.25 138.45 34.61
0128 Mate Day 0.50 138.45 69.22
0016 Hire/ running charges of mastic cooker Day 0.50 515.00 257.50
9999 sundries (Sealing of joints, placing angles, L.S. 153.27 1.00 153.27
wastage materials)
Total 7,392.03
Total 7,465.95
overheads.
Cost for 10.875 sqm 8,585.84
Cost per sqm 789.50
Say 789.50
16.38 2.5 cm thick bitumastic sheet with hot bitumen of approved quality using stone
chippings (60% 12.5 mm nominal size and 40% 10 mm nominal size) @ 1.65 cum
per 100 sqm and coarse sand at 1.65 cum per 100 sqm of road surface and with
bitumen @ 56 kg/cum of stone chippings and @ 128 kg/cum, of sand over a tack
coat with hot straight run bitumen including consolidation with road roller of 8 to
10 tonne etc. complete, (tack coat to be paid separately):

80/100 bitumen @56kg. per cum. of aggregate
and 128kg. per cum. of sand:
56xl.65=92.4kg. = 0.092t +
128x1.65 = 211.2kg =0.211t
2916 = Total= 0.303t tonne 0.303 22,500.00 6,817.50
2914 Solvent 0.070 kg. x 303 kg. = 21.21kg. kilogram 21.21 18.00 381.78
777
0982 Coarse sand cum 1.65 600.00 990.00

2203 Carriage of sand cum 1.65 53.21 87.80
Labour for cleaning road surface, heating
bitumen mixing and spreading aggregate :
(a) For cleaning:
0128 Mate Day 0.16 138.45 22.15
0114 Beldar Day 1.40 135.25 189.35
0115 Coolie Day 1.40 135.25 189.35
(b) For heating bitumen :
0114 Beldar Day 1.19 135.25 160.95
pre-mix aggregate :
0130 Mistry Day 0.24 151.50 36.36
0114 Beldar Day 6.12 135.25 827.73
(d) Consolidation charges :
road roller)
0101 Bhishti Day 0.13 138.45 18.00
0003 Hire charges for road roller Day 0.13 1,000.00 130.00
(e) Misc:
0365 Soft brush each 0.40 12.00 4.80
9999 Sundries L.S. 8.97 1.00 8.97
TOTAL 11,576.43
TOTAL 11,692.19
Cost for 100 sqm. 13,446.02
Say 134.45
16.38.2 With paving Asphalt 60/70. -

60/70 bitumen @56kg. per cum. of aggregate
and 128kg. per cum. of sand:
56x1.65=92.4kg. = 0.092t +
128x1.65 = 211.2kg = 0.211 t
7309 Total= 0.303t tonne 0.303 23,200.00 7,029.60
778
0370 Steam coal for heating bitumen @ 2 quintals quintal 0.606 300.00 181.80
0982 Coarse sand cum 1.65 600.00 990.00
(a) For cleaning:
0128 Mate Day 0.16 138.45 22.15
0114 Beldar Day 1.40 135.25 189.35
0115 Coolie Day 1.40 135.25 189.35
0114 Beldar Day 1.19 135.25 160.95
pre-mix aggregate :
0130 Mistry Day 0.24 151.50 36.36

0114 Beldar Day 6.12 135.25 827.73
(d) Consolidation charges:
road roller)
0101 Bhishti Day 0.13 138.45 18.00
(e) Misc :
0365 Soft brush each 0.40 12.00 4.80
9999 Sundries L.S. 8.97 1.00 8.97
TOTAL 11,405.62
TOTAL, 11,519.68
Cost for 100 sqm. 13,247.63
Say 132.50

Details of cost for 100.00sqm.
Modified Bitumen CRMB - 55 (Refinery
produced) @56kg. per cum. of aggregate and
128kg. per cum. of sand:
56xl.65=92.4kg. = 0.092t +
128x1.65 = 211.2kg = 0.211 t
779
7739 = 0.303 t Tonne 0.303 26,000.00 7,878.00

2914 Solvent 0.070 kg. x 303 kg. = 21.21kg. kilogram 21.21 18.00 381.78
2200 Carriage of steam coal tonne 0.06606 06 .81 3.69
0982 Coarse sand cum 1.65 600.00 990.00
(a) For cleaning:
0128 Mate Day 0.16 138.45 22.15
0114 Beldar Day 1.40 135.25 189.35
0115 Coolie Day 1.40 135.25 189.35
0114 Beldar Day 1.19 135.25 160.95
pre-mix aggregate :
0130 Mistry Day 0.24 151.50 36.36
0114 Beldar Day 6.12 135.25 827.73
(d) Consolidation charges:
road roller)
0101 Bhishti Day 0.13 138.45 18.00
(e) Misc :
0365 Soft brush each 0.40 12.00 4.80
9999 Sundries L.S. 8.97 1.00 8.97
TOTAL 12,636.93
TOTAL 12,763.30
Add lf15% for contractor’s profit and overheads 1 914.50
Cost for 100 sqm. 14,677.80
Say 146.80
16.39 4 cm thick bitumastic sheet with hot bitumen of approved quality using stone
chippings (60% 12.5mm nominal size and 40% 10mm nominal size) @ 2.60cum per
100 sqm and coarse sand at 2.60cum per 100 sqm of road surface and with bitumen
@ 56 kg/cum, of stone chippings and at 128 kg/cum of sand over a tack coat with-
hot straight run bitumen including consolidation with road roller of 8 to 10 tonne
etc. complete, (tack coat to be paid separately):
Details of cost for l00.00sqm.
Paving asphalt 80/100 @56kg. per cum. of
aggregate and 128kg. per cum. of sand:
56x2.60=145.6kg. = 0.146t +
128x2.60 = 332.8kg = 0.333t
780
2916 = 0.479 t tonne 0.479 22,500.00 10,777.50

2914 Solvent 0.70kg.x479=33.53kg. kilogram 33.53 18.00 603.54
0982 Coarse sand cum 2.60 600.00 1,560.00
(a) For cleaning:
0128 Mate Day 0.16 138.45 22.15
0114 Beldar Day 1.40 135.25 189.35
0115 Coolie Day 1.40 135.25 189.35
0114 Beldar Day 1.88 135.25 254.27
pre-mix aggregate :
0130 Mistry Day 0.31 151.50 46.96
0114 Beldar Day 9.46 135.25 1,279.47
0113 Chowkidar Day 0.45 135.25 60.86
0101 Bhishti Day 0.18 138.45 24.92
0003 Hire charges for road roller Day 0.18 1000.00 180.00
(e) Misc :
0365 Soft brush each 0.27 12.00 3.24
9999 Sundries L.S. 16.12 1.00 16.12
TOTAL 17,918.54
TOTAL 18,097.73
Add 15% for contractor’s profit and overheads 2, 714.66
Cost for 100 sqm. 20, 812.39
Say 208.10
@ 56 kg/cum of stone chippings and at 128 kg/cum of sand over a tack coat with
16.39.2 With paving asphalt 60/70 with no solvent
Paving asphalt 60/70 @56kg. per cum. of
aggregate and 128kg. per cum. of sand:
56x2.60=145.6kg. = 0.146t +
128x2.60 = 332.8kg = 0.333t
7309 = 0.479 t tonne 0.479 23,200.00 11,112.80
781
0982 Coarse sand cum 2.60 600.00 1,560.00
per tonne of bitumen =2x0.479=0.958 qtl.
(a) For cleaning:
0128 Mate Day 0.16 138.45 22.15
0114 Beldar Day 1.40 135.25 189.35
0115 Coolie Day 1.40 135.25 189.35
0114 Beldar Day 1.88 135.25 254.27
pre-mix aggregate :
0130 Mistry Day 0.31 151.50 46.96
0114 Beldar Day 9.46 135.25 1,279.47
0113 Chowkidar Day 0.45 135.25 60.86
0101 Bhishti Day 0.18 138.45 24.92
(e) Brushes etc. for cleaning :-
0365 Soft brush each 0.27 12.00 3.24
9999 Sundries L.S. 16.12 1.00 16.12
TOTAL 17,648.52
TOTAL 17,825.01
Cost for 100 sqm. 20,498.76
Say 205.00
@ 56 kg/cum, of stone chippings and at 128 kg/cum of sand over a tack coat with

Modified Bitumen CRMB - 55 (Refinary
produced) @56kg. per cum. of aggregate and
128kg. per cum. of sand:
56x2.60=145.6kg. = 0.146t +
128x2.60 = 332.8kg = 0.333t
782
7739 = 0.479 tonne Tonne 0.479 26,000.00 12,454.00

2914 Solvent 0.70kg.x479=33.53kg. kilogram 33.53 18.00 603.54
0982 Coarse sand cum 2.60 600.00 1,560.00
per tonne of bitumen = 2x0.479=0.95 8q
(a) For cleaning:
0128 Mate Day 0.16 138.45 22.15
0114 Beldar Day 1.40 135.25 189.35
0115 Coolie Day 1.40 135.25 189.35
0114 Beldar Day 1.88 135.25 254.27
pre-mix aggregate :
0130 Mistry Day 0.31 151.50 46.96
0114 Beldar Day 9.46 135.25 1,279.47
0113 Chowkidar Day 0.45 135.25 60.86
0101 Bhishti Day 0.18 138.45 24.92
(e) Misc:
0365 Soft brush each 0.27 12.00 3.24
9999 Sundries L.S. 16.12 1.00 16.12
TOTAL 19,595.04
TOTAL 19,790.99
Cost for 100 sqm. 22,759.64
Say 227.60
16.40 Providing and laying seal coat of premixed fine aggregate ( passing 2.36 mm and
retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade 80 /100
bitumen per cum of fine aggregate and 0.60cum of fine aggregate per 100 sqm of
road surface including rolling and finishing withroad roller all complete.
Details of cost for l00.00 sqm.
2916 Bitumen @ 128kg/cum. of sand 128x0.60 = tonne 0.0768 22,500.00 1,728.00
76.80kg. = 0.0768 m.t.
0982 Fine aggregate (Coarse sand) cum 0.60 600.00 360.00
783
2203 Carriage of coarse sand cum 0.60 53.21 31.93

per tonne of bitumen =2x0.768=0.1.536 qtl.
(a) For cleaning:
0128 Mate Day 0.06 138.45 8.31
0114 Beldar Day 0.49 135.25 66.27
0115 Coolie Day 0.97 135.25 131.19
1114 Beldar-0.38/96x76.8 Day 0.30 135.25 40.57
pre-mix aggregate :
0114 Beldar-11.39/0.75x0.60 Day 1.11 135.25 150.13
0130 Mistry-0.06/0.75x0.60 Day 0.05 151.50 7.58
(d) Miscellaneous :
0113 Chowkidar (at barrier for night watch and for Day 0.15 135.25 20.29
road roller)
0101 Bhishti Day 0.06 138.45 8.31
(e) Misc :
0365 Soft brush each 0.12 12.00 1.44
9999 Sundries L.S. 18.20 1.00 18.20
TOTAL 3,171.88
TOTAL 3,203.60
Cost for 100 sqm. 3,684.14
Cost per sqm. 36.84
Say 36.85
16.41 Providing and laying seal coat over prepared surface of road with bitumen heated
in bitumen boiler fitted with the spray set spraying using 98 kg of bitumen of grade
80/100 and blinding surface with 0.90cum of stone aggregate of 6.7 mm size (Passing
11.2mm sieve and retained on 2.36mm sieve) per 100 sqm of road surface including
rolling and finishing with power road roller all complete.

2916 Bitumen 80/100 tonne 0.098 22,500.00 2,205.00
0298 Stone aggregate cum 0.90 750.00 675.00
per tonne of bitumen =2x0.0.98=1.96 qtl.
(a) For heating and spraying bitumen :
784
0130 Mistry Day 0.04 151.50 6.06
0138 Sprayman Day 0.06 138.45 8.31
0114 Beldar Day 0.69 135.25 93.32
(b) For cleaning:
0128 Mate Day 0.11 138.45 15.23
0114 Beldar Day 1.40 135.25 189.35
0115 Coolie Day 1.41 135.25 189.35
(c) For screening and spraying aggregate :
0128 Mate Day 0.05 138.45 6.92
0114 Beldar Day 0.51 135.25 68.98
(d) Misc :
0113 Chowkidar (at barrier for night watch and for Day 0.15 135.25 20.29
road roller)
0101 Bhishti Day 0.06 138.45 8.31
(e) Misc :
0365 Soft brush each 0.12 12.00 1.44
9999 Sundries L.S. 18.20 1.00 18.20
TOTAL 4,305.63
TOTAL 4,348.69
Cost for 100 sqm. 5,000.99
Cost per sqm. 50.01
Say 50.00
16.42 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm
nominal size) in pavements, laid to required slope and camber in panels as required
including consolidation finishing and tamping complete.

Cement concrete 1:2:4 mix
0293 Stone aggregate 40mm*(one size) cum 0.52 650.00 338.00
0295 Stone aggregate 20mm (one size) - cum 0.22 700.00 154.00
0297 Stone aggregate 10mm (one size) - cum 0.11 700.00 77.00
2202 Carriage of stone aggregate 20mm . cum 0.33 53.21 17.56
0982 Coarse sand cum 0.445 600.00 267.00
0367 Cement tonne 0.32 4,500.00 1,440.00
Labour:
0155 Mason (Av.) Day 0.10 144.55 14.66
0114 Beldar Day 1.63 133.25 220.46
0101 Bhishti Day 0.70 138.45 96.92
0002 Mixer (Concrete) Day 0.077 400.00 30.80
0012 Vibrator Day 0.07 200.00 14.00
9999 Sundries L.S. 26.00 1.00 26.00
Side shuttering :
Taking the slab to be 15cm thick and width to
785
be 6 metre, length of road 27 metre =

9.90/24.30
(Rate as per item No.5.9.1 S.H.R.C.C. work) Sqm 0.407 119.25 48.53 (A)
9999 Sundries = L.S. 1.43 1.00 1.43
TOTAL 2,847.94
TOTAL 2,875.93
Cost for one cum. 3,300.04
say 3,300.05

16.43 Providing and laying design mix cement concrete in roads, taxi tracks and runways
having a minimum works test beam flexural strength of 30 kg. per cm2 at 28 days using
not less than 340 Kg. of cement per cum of finished concrete, coarse sand and graded
stone aggregate of 40mm nominal size in appropriate proportions as per specified design
criteria approved by Engineer-in-charge,mechanically. vibrated using needle and surface
vibrators including steel form work with sturdy M- S. channel sections including curing
and providing and filling construction joints and dummy joints with approved joint filter
Primer or equivalent including rounding of the edges and filling the grooves 10x25mm
deep at top for construction joints and 10mmx50mm deep at top for dummy joints with
joint sealing compound (conforming to grade B of IS : 1834) including making necessary
arrangements for expansion joints etc. all complete.

Materials:
0367 Cement tonne 0.34 4,500.00 1,530.00
0293 Stone aggregate 40mm cum 0.52 650.00 338.00
0982 Coarse sand cum 0.445 600.00 267.00
2206 Carriage of stone aggregate 40mm nominal cum 0.52 57.83 30.07
size
2202 Carriage of stone aggregate below 40mm cum 0.33 53.21 17.56
Labour :-For mixing and laying
0114 Beldar Day 0.90 135.25 121.72
0115 Coolie Day 0.60 135.25 81.15
0101 Bhishti Day 0.27 138.45 37.38
0128 Mate Day 0.04 138.45 5.54
For compaction by vibrator
0155 Mason (av.) Day 0.07 146.55 10.26
0114 Beldar Day 0.07 135.25 9.47
Machinery:
0002 (i) Hire charges of mixer (Assuming 25 cum. Day 0.05 400.00 20.00
per day)
0021 (ii) Pin vibrator (SHP) with 50 cum. output Day 0.025 288.00 7.20
per day
0022 (iii) Surface vibrator with 25 cum. output per Day 0.05 330.00 16.50
786
Fuel Charges :
1235 (i) Diesel for mixer litre 1.20 30.25 36.30
1235 (ii) Diesel for Pin vibrator (10 lit. / day litre 0.25 30.25 7.56
assumed)
1235 (iii) Diesel for Surface vibrator ( 5 lit./ day litre 0.25 30.25 7.56
assumed)
Add for construction and filling of dummy
joints
(A) Rate as per Annexure (A) cum 1.00 96.32 96.32
Add for steel form work
(A) Rate as per Annexure (B) cum 1.00 199.40 199.40
9999 Tirrection and transportation and testing of L.S. 54.60 1.00 54.60
weigh batch plant etc.
TOTAL 3,179.01
TOTAL 3,210.80
Say 3,692.40

ANNEXTURE ‘A’ to item No. 16.43
Materials:
(i) Painting with primer
(i) Construction joint 6.15m. long 30cm deep
6.15x(0.30+0.01)= 1.91sqm.+
(ii) Dummy joints
4.61m long and 10cm deep 10mm wide
4.6 lx(0.10+0.10+0.01) = 0.97 sqm.
= 2.88 sqm.
2.88sqm. @0.26 lit./sqm. = 0.75 lit. +
Add 5% wastage = 0.03
0316 =0.78 lit. Litre 0.78 28.00 21.84
9999 Carriage of primer L.S. 0.91 1.00 0.91
(ii) Joint sealing compound (GradeA) for
construction joint 6.15m long 10mm wide
25mm deep.
6.15x2x2.5cm = 3075cucm.
For dummy joints
461xl.0xl0cm. = 4610cucm.
= 7685 cum
Add 5% wastage = 384 cucm
= 8069 cucm
0314 = 8.07 cudm. @1.2kg/cudm. kilogram 9.68 20.00 193.60
9999 Carriage of sealing compound L.S. 0.91 1.00 0.91
9999 Carriage of steam coal L.S. 0.91 1.00 0.91
787
Labour:
(ii) For applying primer qty. =
2.88 sqm.
0131 Painter = Day 0.10 141.60 14.16
(iii) Labour for heating and filling sealing
compound.
(iv) Beldar for heating = 0.06 +
0114 Day 0.68 135.25 91.97

Cost of 8.5mm 818.70
Cost per cum. 96.32
Say- 96.32
ANNEXTURE B to item No. 16.43

STEEL FORM WORK :
Part-1 Cost of materials :
Assuming that pavement 30m long 22.5m
wide and 0.30m deep having panel size
6.15x4.6lx0.30m or 8.50cum laid in a day of 8
hrs. Hence form work to be provided for 2
days.
Material for 61.5m long 46.10m wide
pavement
22x30.75 = 676.50
2x46.10 = 92.20
Total = 768.70m.
768.70 @ 83.10 kg/ m = 25.44 M.T.
Assuming that channel will become
unserviceable after use for 5000 slab (100
times) and salvage value of steel shall fetch
20% of its basic cost.
1007 Steel 254.44 qx4/5x 1/5000 = 0.0407104 q quaintal 0.0407104 3,100.00 126.20
2205 Carriage of steel 25.44x4/5x1/5000= tonne 0.00407104 47.29 1.93
0.00407104 tonne
Part-II Labour for assembling, errection,
dismetelling and cleaning the shuttering.
Assuming that 255 labour for steel shuttering
shall be required as compared to timber
shuttering. Contact area of 50 slabs of steel
shuttering.
Long channel = 11x20x0.30 = 66.00
= 2x45.10x0.30 = 27.06
Total= 93.06
0114 Beldar = Day 5.73 135.25 774.98
Carriage of steel for extra lead of runway
0114 Beldar = Day 5.73 135.25 774.98
Cost of 50 slabs 8.5 cmm. 1,694.91
Cost per cum 199.40
Say 199.40
788
16.44 Extra for providing and mixing hardening campound of approved quality as per
manufacturer’s specification in cement concrete.
Details of cost for 1.00 litre

Materials :
7254 Hard crete (including cartage) litre 1.00 29.00 29.00
TOTAL 29.00
TOTAL 29.29
Cost per litre 33.68
Say 33.70
16.45 Providing and fixing in position premoulded joint filler in expansion joints.
Details of cost for 18mm thick 15cm deep and

300m in length = 300x0.15 = 45 sqm.
0317 18mm thick joint filler sqm 45.00 300.00 13,500.00
Carriage of filler
45x0.018 =0.81 cum.
Weight 256.3kg. per cum. = 256.3x0.81
= 207.6kg.
2211 = 0.21 tonne tonne 0.21 53.21 11.17
Labour for fixing etc. :
0114 Beldar Day 3.00 135.25 405.75
9999 Sundries L.S. 26.91 1.00 26.91
TOTAL 14,085.43
TOTAL 14,226.28
Cost for 300m length, 18mm width and 15cm 16,360.22
depth
Cost for one cm. depth one cm. width per 2.02
metre length.
Say 2.00
16.46 Providing and laying in position bitumen hot sealing compound for expansion
joints etc.
16.46.1 Using grade ‘A’ sealing compound.
Details of cost for 20mm wide 20mm deep

and 300 metres in length.
Sealing compound-
300x0.02x0.02 = 0.12cum.
0314 Weight 256.3kg. per cum. = 256.3x0.12 = kilogram 30.76 20.00 615.20
30.76 kg.
2211 Carriage of compound 30.76 = 0.3076 Say tonne 0.03 53.21 1.60
0.03 tonne
Labour for filling:
0114 Beldar Day 2.5 135.25 338.12
789

9999 Sundries L.S. 20.67 1.00 20.67
TOTAL 1,117.19
TOTAL 1,128.36
Cost for 20mm depth, 20mm width and 300m 1,297.61
length
Cost for one cm. depth one cm. width per 1.08
metre length.
Say 1.10
16.47 Painting runway/taxi track/apron marking with adequate no. of coat to give uniform
finish with road marking paint of superior make as approved by the Engineer-in-
charge including cleaning the surface of all dirt, scales, oil, grease and other foreign
material etc and lining out complete.
16.47.1 New work (Two or more coats)
Details of cost for 10sqm.

Material:
1st Coat = 1.66 +
2nd Coat = 1.13
= 2.79
7256 Road marking paint litre 2.79 148.00 412.92
9999 Carriage of paint L.S. 5.07 1.00 5.07
Labour:
0131 Painter Day 0.54 141.60 76.46
0114 Beldar Day 0.54 135.25 73.04
9999 Sundries (including painting brush, wire L.S. 36.40 1.00 36.40
brush, labour for controlling traffic and other
T&P etc.)
TOTAL 603.89
TOTAL 609.93
Cost per sqm. 70.14
Say 70.15
16.47 Painting runway/taxi track/apron marking with adequate no. of coats to give uniform
finish with road marking paint of superior make as approved by the Engineer-in-
charge i/c cleaning the surface of all dirt, scales, oil, grease and other foreign material
etc. and lining out complete.
16.47.2 Old work (One or more coats)

Material:
7256 Road marking paint litre 1.66 148.00 245.68
Labour:
0131 Painter Day 0.36 141.60 50.98
0114 Beldar Day 0.36 135.25 48.69
790
T&P etc.)
TOTAL 370.91
TOTAL 374.62
Cost per sqm. 43.08
Say 43.10
16.48 Painting road surface marking with adequate no. of coats to give uniform finish
with ready mixed road marking paint conforming to IS : 164, on bituminous surface
in white/yellow shade including cleaning the surface of all dirt, scales, oil, grease
and foreign material etc. complete.
16.48.1 New work (Two or more coats).

Material:
7255 Road marking paint (confirming to IS 164 litre 1.48 97.00 143.56
spirit base)
9999 Carriage of paint (1.48/0.800.086.9) L.S. 2.65 1.00 2.65
Labour:
0128 Mate/Supervisor Day 0.10 138.45 13.84
0131 Painter Day 0.54 141.60 76.46
0114 Beldar for stretching of rope & errecting of Day 1.68 135.25 227.22
barricading
T&P etc.)
TOTAL 500.13
TOTAL 505.13
Cost per sqm. 58.09
Say 58.10
16.48 Painting road surface marking with adequate no. of coats to give uniform finish
with ready mixed road marking paint conforming to IS : 164, on bituminous surface
in white/yellow shade including cleaning the surface of all dirt, scales, oil, grease
and foreign material etc. complete.
16.48.2 Old work (One or more coats)

Material:
7255 Road marking paint (confirming to IS 164 litre 0.89 97.00 86.33
spirit base)
0999 Carriage of Paint L.S. 0.65 1.00 0.65
Labour:
0128 Mate/Supervisor Day 0.06 138.45 8.31
0131 Painter 2nd class Day 0.36 141.60 50.98
0114 Beldar (stretching of rope & errecting of Day 1.12 135.25 151.48
791
barricading etc.)
T&P etc.)
TOTAL 322.19
TOTAL 325.41
Add15 % for contractor’s profit and overheads 48.81
Cost per sqm. 37.42
Say 37.40
16.49 Making bell mouth opening/ entrance of size 100x50x50cm for drainage pipe under
footpath including providing cement concrete 1:3:6 (1 cement: 3 coarse sand : 6
graded stone aggregate 20mm nominal size) for shape of bell mouth including
plastering providing and fixing precast R.C.C./ S.F.R.C. slab including plastering
with cement mortar 1:3 (1 cement: 3 fine sand) of 6 mm thickness on exposed
surface of the slab & bell mouth including centring, shuttering & neat cement
punning inside the bell mouth etc. all complete.
Details of cost for 10.00 Nos.

(i) Earth work in excavation
Channel:- 10x1x1.00x0.20x0.15=0.30+
Bell mouth 10x1x1.00x0.50x(0.18+0.075)/2= 0.64
(Rate as per item no. 2.8.1) Total = 0.94 cum 0.94 103.40 97.20(A)
(ii) Cement concrete 1:4:8
Channel :-10x1x1.00x0.20x0.075 = 0.15 cum.
(Rate as per item no.4.1.8 cum 0.15 2449.00 367.35(A)
(iii) Cement concrete 1:3:6
Channel
10x1x1.00x0.20x0.075 = 0.15 +
Bed of bell mouth :
10x1x1.00x0.50x(0.18+0.075)/2 = 0.64 +
Haunches portion
10x2x(0.35+0.075)/2x0.25x0.375 = 0.40 +
Rect part :-
10x2x0.35x0.25x0.375 = 0.65 +
Quadrant portion :-
10x 1 [(0.30x0.30)-3.142/4(0.30)^x0.30
=0.06+
Central middle part :-
10x1x0.30x0.25x0.075 = 0.05
Total = 1.95 cum.
(Rate as per item no.4.1.5) cum 1.95 2 791.05 5,442.55(A)
(iv) RCC in shelves 1:2:4
10x1x1.00x0.50x0.05 =0.25cum.
(Rate as per item no. 5.3 SH : R.C.C.) cum 0.25 3 673.85 918.46(A)
(v) Reinforcement for RCC @100kg/cum.
0.25x100=25kg.
(Rate as per item no 5.22.1) kg 25.00 41.50 1,037.50(A)
(vi) Centering and shuttering
For shelves (sides)
(X)10x2(1.00+0.50)x0.05= 1.50+
Front side of bell mouth :
(X)10x2(0.446)x0.375 = 3.34 +
792
Pipe portion:
10x[0.30x0.375-3.142/4(0.30)2] = 0.04 +
Out side of bell mouth
= 10x(1.000.50)x0.45 = 9.00+
Deduct pipe opening
=10x0.785x0.30x0.30 = (-)0.71
= 13.17
(Rate as per item no.5.9.1) sqm 13.17 119.25 1570.52
(vii) cement plaster on RCC slab
10x1.00x0.50 = 5.00+
10x2(1.00+0.50)x0.05 = 1.50+
= 6.50 sqm.
(Rate as per item no.13.16.1) sqm 6.50 62.15 403.98
(viii) Neat cement punning:
Qty. same as marked (x) at (vi) above
=3.34+0.04 = 3.38 sqm.
Channel portion:
10x1x(0.85+0.30)/2x0.25 = 1.43
Total = 4.81
(Rate as per item no.l3.18 S.H. Finishing) sqm 4.81 21.40 102.93
0367 Cement tonne 0.024 4500.00 108.00(A)
2209 Carriage of cement tonne 0.024 47.29 1.13(A)
0983 Fine sand cum 0.05 320.00 16.00(A)
2261 Carriage of fine sand cum 0.05 53.21 2.66(A)
0114 Beldar Day 0.035 135.25 4.73(A)
0101 Bhishti Day 0.003 138.45 0.42(A)
9999 Hire charges of mixer L.S. 1.27 1.00 1.27(A)
9999 Sundries L.S. 1.27 1.00 1.27(A)
Labour for plaster
0155 Mason Day 0.33 146.55 48.36(A)
0115 Coolie Day 0.488 135.25 66.00(A)
0101 Bhishti Day 0.60 138.45 83.07(A)
9999 Extra for removing burr L.S. 8.71 1.00 8.71(A)
9999 Scaffolding L.S. 7.62 1.00 7.62(A)
TOTAL 10,289.73
(B) Add 1 % for water charges on (A) 3.49(B)
TOTAT 10,293.22
on (A+B)
Cost for 10 nos. 10,346.13
Cost for one bell mouth 1034.61
Say 1034.60
16.50 Providing and fixing Glow studs of size 100x20 mm made of heavy duty body shall
be moulded ASA (Acrylic styrene Acryloretrite ) or HIP (High impact polystyrene)
or ABS having electronically welded micro- prismatic lens with abrasion resistant
coating as approved by Engineer in charge. The glow stud shall support a load of
13635 kg tested in accordance with ASTM D4280. The slope of retro- reflective
surface shall be 35 +/-5 degrees to base .The reflective panels on both sides with at
least 12 cm of reflective area up each side. The luminance intensity should be as
per the specification and shall be tested as described in ASTM I: 809 as
793
recommended in BS : 873 part 4 : 1973. The studs shall be fixed to the Road surface
using the adhesive conforming to IS, as per procedure recommended by the
manufacturer complete and as per direction of Engineer-in-charge.
Details of cost for 15 Nos.

Materials:
7426 Cats eye each 15.00 450.00 6 750.00
Labour:
0114 Beldar Day 0.50 135.25 67.62
9999 Sundries (including material required for L.S. 39.00 1.00 39.00
fixing cats eyes and providing barricading to
divert traffic)
TOTAL 6 930.02
TOTAL 6 999.32
Add 15% for contractor’s profit and overheads 1 049.90
Cost for 15 Nos. 8 049.22
Cost for one cat’s eye. 536.61
Say 536.60
16.51 Preparation of sub-base road pavement with commercial dry lime (slaked), fly ash
stabilised soil with a mix of 3% lime, 12% fly ash and 85% local suitable soil by
weight, so as to achieve minimum field C.B.R. of 20 including mixing, rolling with
road roller curing etc. all complete.
16.51.1 Minimum thickness 15 cm.
Details of cost for 6.67 sqm. or 1 cum.

Materials:
0777 slaked lime quintal 0.41 177.00 72.57
1980 Flyash cum 0.277 6.00 1.66
2267 Carriage of Flyash cum 0.277 53.21 14.74
Labour:
(i)For earth work:
0114 Beldar Day 0.116 135.25 15.69
0115 Coolie Day 0.116 135.25 15.69
2241 Carriage of good earth cum 0.655 66.51 43.56
(ii) For mixing:
0114 Beldar Day 0.025 135.25 3.38
0115 Coolie Day 0.025 135.25 3.38
(iii) For rolling layers :
0113 Chowkidar Day 0.0008 135.25 0.11
0003 Hire charges of roller Day 0.0008 1 000.00 0.80
2342 Carriage of diesel quintal 0.0002 5.32
9999 Sundries L.S. 0.18 1.00 0.18
(iv) Labour for spreading and watering :
0114 Beldar Day 0.26 135.25 35.16
794
0115 Coolie Day 0.26 135.25 35.16
0101 Bhishti Day 0.18 138.45 24.92
TOTAL 278.26
TOTAL 281.04
Cost for 1 cum. 323.20
Say 323.20
16.52 Providing and fixing precast lime fly ash concrete blocks 1:2:3:6 (1 lime : 2 fly ash :
3 coapSe sand : 6 graded stone aggregate 20 mm nominal size) including finishing
with 10mm thick cement mortar 1:3 (1 cement: 3 coarse sand) in foot paths including
preparation of sub grade with a hand rammer, laying 10 mm thick leveling course of
fine sand (jamuna sand) and filling the joints with fine sand.
Sub Analysis - X
Details of cost for 1 cum of lime Flyash mortar
1:2:3 (lime:2 flyash:3 coarse sand).
Materials:
0773 Unslaked lime quintal 1.52 260.00 395.20
1980 Flyash cum 0.48 6.00 2.88
0982 Coarse sand cum 0.72 600.00 432.00
2208 Carriage of Unslaked lime cum 0.24 53.21 12.77
2262 Carriage of Flyash cum 0.48 53.21 25.54
Labour for slaking the lime making, lime
putty, grinding, measuring, carrying,
depositing and mixing.
0114 Beldar Day 0.90 135.25 121.72
0101 Bhishti Day 0.45 138.45 62.30
9999 Running and upkeep of mortar mile L.S. 26.91 1.00 26.91
9999 Sundries L.S. 13.52 1.00 13.52
TOTAL 1 1310.15
Cost of 1.00 sqm 1 131.15
Sub Analysis - Y
Details of cost for 1 cum. of cement concrete
Materials:
Lime Flyash mortar
Rate as per Sub Analysis 16.52 (Marked ‘X’) cum 0.40 1131.15 452.46
0295 Stone aggregate 20mm nominal size cum 0.64 700.00 448.00
Labour:
0114 Beldar Day 0.65 135.25 87.91
0115 Coolie Day 0.66 135.25 81.15
0101 Bhishti Day 0.27 138.45 37.38
795
0128 Mate Day 0.04 138.45 5.54
9999 Hire and running charges of mixer L.S. 26.91 1.00 26.91
9999 Sundries L.S. 13.52 1.00 13.52
9999 Hire charges of steel moulds, table vibrators, L.S. 53.82 1.00 53.82
rammers, bolts, nuts and washers etc.
TOTAL 1,413.58
Cost or 1.00 cum 1,413.58
Details of cost for a path of area 10.00 sqm. no. of
blocks required for 10.00 sqm. = 108 nos.
(a) Concrete in blocks
(108x0.30x0.30x0.09 = 0.875 cum.)
(Rate as per sub analysis Marked ‘Y’) cum 0.875 1413.58 1236.88
(b) Labour for Surface excavation .
0114 Beldar Day 0.72 135.25 97.38
0115 Coolie Day 0.60 135.25 81.15
(c) For levelling course of fine sand
6501 Jamuna sand cum 0.10 175.00 17.50
2335 Carriage of Jamuna sand cum 0.10 53.21 5.32
Labour:
0114 Beldar Day 0.0089 135.25 1.20
0115 Coolie Day 0.0107 135.25 1.45
0101 Bhishti Day 0.0035 138.45 0.48
(d) For finishing with 10mm thick cement
plaster
2112 1:3 qty. for 9.72sqm. cement mortar 1:3(1 cum 0.0972 3 169.60 308.09
Cement: 3 Coarse sand)
0155 Mason Day 0.787 146.55 115.33
0115 Coolie Day 0.787 135.25 106.44
0101 Bhishti Day 0.262 138.45 36.27
(e) For laying blocks and filling joints with
Jamuna sand for filling joints 5mm (av.) thick
6501 Fine sand (Jamuna) cum 0.005 175.00 0.88
0115 Coolie Day 1.98 135.25 267.80
0101 Bhishti Day 0.05 138.45 6.92
TOTAL 2431.93
TOTAL 2,456.25
Cost for 10sqm. or 0.9 cum. 2,824.69
Rate per cum. 3,138.54
Say 3,138.55
16.53 Providing and fixing concertina coil fencing with required dia 600 mm upto 3m
height of wall with existing angle iron ‘Y’ shaped placed 2.4 m or 3.00 m apart and
with 9 horizontal R.B.T. stud tied with G.I. staples and G.I. clips to retain horizontal
796
including necessary bolts or G.I. barbed wire tied to angle iron all complete as per
direction of Engineer-in-charge with reinforced barbed tape (R.B.T.) / Spring core
(2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm. with tape (0.52 mm
thick) of Supreme make or equivalent and weight 43.478gm/ metre (cost of M.S.
angle, C.C. blocks shall be paid separately)
Details of cost for 30.00 m length

Materials :
8691 Punched tape concertina coil 600 m dia. 10m bundle 3 .00 650.00 1,950.00
openable length (Total length 90m)
Therefore, Nos. of bundles 30/10=3bundles)
8692 R.B.T. Reinforced Barbed Tape 9 rounds metre 270.00 7.50 2,025.00
9x30 = 270m
8693 Turn buckle and strengthening bolt. each set 10.00 35.00 350.00
9999 G.I. staples clips etc. L.S. 49.40 1.00 49.40
Labour
Labour for fixing straightening cutting of tape/
coils & wire
0114 Beldar 0.50x2 = 1.00 Nos (Taken double due Day 1.00 135.25 135.25
to height)
Total 4,656.20
Total 4702.76
overheads.
cost for 30.00 metre 5,408.17
cost per metre 180.27
Say 180.25
16.54 Providing and laying Dense Bituminous macadam on prepared surface with
specified graded crushed stone aggregate for profile corrective base/ binding
course including loading of aggregate with FE loader and hot mixing of stone
aggregate, filler and bitumen in hot mix plant, transporting the mixed material by
tippers to paver and laying the mixed material with paver finisher fitted with
electronic sensing device to the required level and grade and rolling by road roller
as per MORTH specifications, to achieve the desired density, but excluding the
cost of primer / tack coat.
16.54.1 50/75mm average compacted thickness with bitumen of 60/70 grade @ 5%
(percentage by weight of total mix) and lime filler @ 2% (percentage by weight
of Aggregate).
Details of cost for 63.91 cum (or 147 M.T.)

(A day’s output of hot mix plant).
Taking density 2.3 gm/ c.c. Gross weight of
mix = 147 M.T.
Materials
Crushed stone aggregate weight = 147.00 -
7.35 = 139.65 M.T.
797

Assuming density of stone aggregate 1427
kg/cum.
26.5-13.2mm@30%
13.2-2.8mm@28%
Stone dust @ 40%
Hydrate lime @ 2%
0294 Crushed Stone Aggregate 26.5mm =30% x cum 29.36 675.00 19,818.00
139.65/1.427.
0296 Crushed stone Aggregate 13.2.5mm = cum 27.40 700.00 19,180.00
28%x139.65/1.427.
1159 Stone dust=40%xl39.65/l.523 cum 36.68 700.00 25,676.00
2202 Carriage of crushed stone aggregate. cum 56.76 53.21 3,020.20
0777 Hydrated lime = 2%of 139.65 M.T. =2.793 quintal 27.93 177.00 4,943.61
M.T. or 27.93 Qtl.
2208 Carriage of Lime = 2.79 M.T./1.29 MT/cum= cum 2.16 53.21 114.93
2.16 cum
2267 Carriage of Stone dust cum 36.68 53.21 1,951.74
(B) Labour charges
Labour required for loading platform, paver
and for taking level etc.
0114 Beldar Day 11.00 135.25 1,487.75
0113 Chowkidar Day 3.00 135.25 405.75
0130 Mistry Day 1.00 151.50 151.50
0101 Bhisti for road roller = 147/ (2.30x0.05x370) Day 3.45 138.45 477.65
(C) Machinery/ Hire charges:
Assuming effciency as 60%, 7 hours working,
capacity 35 tonne (avg.) per hours
Qty. of asphalt = 7x35x60/100 = 147 MT
0008 Hire charges of B.G. Plant. Day 1.00 7,050.00 7,050.00
0017 Hire charges of tipper = 147/(5.19x8)=3.54 Day 3.54 1,030.00 3,646.20
No
0018 Hire charges of loader Day 1.00 800.00 800.00
0003 Road roller (Density = 2.30 M.T./Cum.) One Day 3.45 1000.00 3,450.00
roller compacts 370 sqm/day
(D) Fuel charges:
Two engines for hot mix plant and one for
paver finisher @ 4 ltr./ enginer/ hr. and 7
hours working=3x4x7=84.00 litres
For drier, premixing and heating materials:
Taking efficiency as 96%
=96/100x147=141.12 M.T.
141.12M.T.@ 5 ltr./M.T. =705.60 litres
One steam burner is to start two hours earlier
to heat up the plant at high flames, there fore
diesel required for two hours per day @ 20 ltr.
Per hours =2x20 = 40.00 litres.
Then flames are reduced and required to burn
for 7 hrs @ 10 ltr./ hrs =7x10 = 70.00 litres
Diesel for road roller =3.45 days @ 18 ltr./
day = 62.10 litre.
Diesel for loader @ 11.25 ltr/each = 11.25
litres.
Diesel for tipper
As per DAR Vol. 1 lead 5 km., No. of
trips=5.19 Nos. Diesel required = 11.58 ltrs
and carrying capacity = 8 tonne.
798

147.00x11.58/5.19x8. =41.00 litres
Total =1013.95 litre
1235 Diesel oil litre 1013.95 30.25 30,671.99
9999 Carriage of diesel L.S. 1388.01 1.00 1,388.01
Mobil oil:
For 41.52 M.T. = 0.414 ltr
For 147 M.T.=0.414/41.52xl47 = 1.47 ltr
5001 Mobil oil litre 1.47 95.00 139.65
Total 295,284.07
Total 298,236.91
overheads.
Cost for 63.91 cum(147 M.T.) 342,972.45
Say 5,366.50
16.55 Providing and laying Bituminous Macadam on prepared surface with specified
graded crushed stone aggregate for profile corrective base/ binder course including
loading of aggregate with F.E. loader , hot mixing of stone aggregates and bitumen
in hot mix plant, transporting the mixed material by tippers to paver and laying the
mixed material with paver finisher fitted with electronic sensing device to the
required level and grade and rolling with road rollers, as per MORTH specification
to achieve the desired density and compaction but excluding the cost of primer/
tack coat.
16.55.1 50mm / 75mm average compacted thickness with bitumen of 60/70 grade @ 3.5%
(Percentage by weight of total mix)
Details of cost for 66.81 cum
Materials
7309 Bitumen 60/70-3.5% of 147 M.T. tonne 5.15 23,200.00 119,480.00
0294 Crushed stone Aggregate 26.5 mm @ 22% of cum 21.87 675.00 14,762.25
141.85x1/1.427.
0296 Crushed stone Aggregate 13.2 mm @ 75% of cum 74.55 700.00 52,185.00
141.85x1/1.427
1159 Fine aggregate 2.8mm & below @ 3% of cum 2.98 700.00 2, 086.00
141.85 x 1/1.427
2202 Carriage of Stone aggregate 26.5 mm . cum 21.87 53.21 1,163.70
2202 Carriage of Stone aggregate 13.2 mm cum 74.55 53.21 3,966.81
2267 Carriage of fine aggregate 2.8mm. cum 2.98 53.21 158.57
Labour for loading platform, paver and taking
levels etc.
0114 Beldar Day 5.00 135.25 676.25
0113 Chowkidar Day 3.00 135.25 405.75
0130 Mistry Day 1.00 151.50 151.50
0101 Bhisti for road roller Day 3.61 138.45 499.80
0114 Beldar for taking levels Day 6.00 135.25 811.50
Machinery
0008 Hire charges of B.G plant. Day 1.00 7,050.00 7,050.00
0017 Hire charges of Tipper 147/(5.19x8) = 3.54 Day 3.54 1,030.00 3,646.20
0003 Hire charges of Diesel Road Roller Day 3.61 1,000.00 3,610.00
1235 Diesel litre 1,016.83 30.25 30,759.11
799

9999 Carriage of Diesel. L.S. 1388.01 1.00 1388.01
5001 Mobil oil litre 1.47 95.00 139.65
Total 244,014.13
Add 1% for water charges. 2,440.14
Total 246,454.27
Cost for 66.81 cum 283,422.41
Cost per cum 4,242.22
Say 4,242.20
16.56 Providing and laying Dense Bituminous concrete on prepared surface with
specified graded stone aggregate for wearing course including loading of aggregate
with F.E. loader , and hot mixing of bitumen with filler and stone aggregate in hot
mix plant , transporting the mixed material by tippers to paver and laying the mixed
material with mechanical paver finisher fitted with electronic sensing device to the
required level and grade and rolling with road rollers, as per MORTH specification,
to achieve the desired density and compaction but excluding cost of primer/ tack
coat.
16.56.1 40 mm/50mm compacted thickness with bitumen of grade 60/ 70 @ 5.5% and lime
@3% (percentage by weight of total mix).
Details of cost for 147.00 MT (62.29 cum)
Material
7309 Bitumen Grade 60/70, 5.5% of 147 tonne 8.085 23,200.00 187,572.00
M.T.Paving Asphalt 60/70 penetration
0296 Stone Aggregate 13.2 mm. cum 4.7 700.00 3,297 .00
0297 Stone Aggregate 11.2 mm. cum 47.13 700.00 32,991.00
1159 Stone dust cum 39.74 700.00 27,818.00
2202 Carriage of Stone aggregate . cum 51.84 53.21 2,758.41
0777 Dry hydrated lime 2 3% of 147 M.T. quintal 44.10 177.00 7,805.70
2208 Machinery carriage of Hydredted lime cum 3.42 53.21 181.98
0008 Hire charges of BG plant. Day 1.00 7,050.00 7,050.00
0017 Hire charges of tipper Day 3.54 1,030.00 3,646.20
1235 Diesel litre 998.17 30.25 30,194.64
9999 Carriage of Diesel. L.S. 1348.88 1.00 1,348.88
5001 Mobil oil litre 1.47 95.00 139.65
and for taking level etc.
0114 Beldar Day 11.00 135.25 1,487.75
0113 Chowkidar Day 3.00 135.25 405.75
0130 Mistry Day 1.00 151.50 151.50
0101 Bhisti for road roller Day 3.39 138.45 469.35
Total 314,052.58
Add 1 % for water charges 3,140.53
Total 317,193.11
overheads.
Cost for 62.29 cum 364,772.08
Say 5,856.05
800
16.57 Providing and laying Dense Bituminous Concrete on prepared surface with
specified graded stone aggregate for wearing course including loading of
aggregate with F.E. loader, and hot mixing of bitumen with filler and stone aggregate
mixed material with mechanical paver finisher fitted with electronic sensing device
to the required level and grade and rolling with road rollers, as per MORTH
specifications, to achieve the desired density and compaction but excluding cost
of primer/ tack coat.
16.57.1 40 mm/50mm compacted thickness with bitumen of grade CRMB - 60 @ 5.5% and
lime @3% (percentage by weight of total mix).
Taking density 2.36 gm/c.c. Gross weight of
mix= 147 M.T.
Materials:
Crushed stone aggregate and stone dust weight
= 147-8.085-4.41=134.505 M.T. Taking
density of stone aggregate as 1427kg./cum and
density of stone dust as 1523kg./cum and
taking stone aggregate 13.2mm @ 5% stone
aggregate 11,2mm @ 50% and stone dust @
45%
0296 Stone Aggregate 13.2mm = 6.725 M.T. cum 4.71 700.00 3,297.00
1159 Stone dust =60.527 M.T. cum 39.74 700.00 27,818.00
2202 Carriage of Stone aggregate cum 51.84 53.21 2,758.41
0777 Hydrated lime 147 M.T. @ 3%. qunital 44.1 177.00 7,805.70
2208 Carriage of Lime 4.41/1.29 M.T./ cum= 3.42 cum 3.42 53.21 181.98
cum
(B) Hire charges of machinery
Assuming effciency as 60% 7 hours working,
capacity 35 tonne (avg) per hours
Qty. of asphalt = 7x35x60/100=147 M.T.
No.
(62.29/0.04x460)
Fuel charges:
hours working = 3x4x7 = 84.00 litres
For drier , premixing and heating materials:
=94/100x147=138.18M.T.
138.18 M.T. @ 5 ltr./m.T.= 690.90 litres
For burner
One steam, burner is to start two hours earlier
diesel required for tow hours per day @ 20 ltr.
per hours =2x20=40.00 litres
for 7 hrs. @ 10 ltr./ hrs=7x 10=70.00 litres
801

Diesel for road roller = 3.39 days @ 18 ltr./
day = 60.02 litres.
Diesel for loader @ 11.25 ltr/ each = 11.25
ltrs
Diesel for tipper
As per DAR Vol. 1 lead 5 km., No, of trips =
5.19 Nos. Diesel required = 11.58 ltrs and
carrying capacity = 8 tonne
147.00x11.58/5.19x8,=41.00 ltrs
1235 Total = 998.17 ltr litre 998.17 30.25 30,194.64
9999 Carriage of diesel L.S. 1348.88 1.00 1,348.88
Mobil oil:
For 41.52 M.T. = 0.414 ltr
5001 For 147 M.T.= 0.414/41.52x147=1.47 ltr litre 1.47 95.00 139.65
(D) labour charge
and for taking levels etc.
0114 Beldar (5.00+6.00=11.00 Nos.) Day 11.00 135.25 1,487.75
0113 Chowkidar Day 3.00 135.25 405.75
0130 Mistry Day 1.00 151.50 151.00
0101 Bhisti for road roller = 147/(2.36x0.04x460) Day 3.39 138.45 469.35
Total 339,116.08
Add 1% for water charges 3,391.16
Total 342,507.24
overheads.
Cost for 62.29 cum 393,883.33
Say 6,323.40
16.58 Providing and laying Dense Bituminous Concrete on prepared surface with
specified graded stone aggregate for wearing course including loading of
aggregate with F.E. loader, and hot mixing of bitumen with filler and stone aggregate
mixed material with mechanical paver finisher fitted with electronic sensing device
to the required level and grade “and rolling with road rollers, as per MORTH
specifications, to achieve the desired density and compaction but excluding cost
of primer/ tack coat.
16.58.1 40 mm/50mm compacted thickness with bitumen of grade PMB - 40 @ 5.5% and
lime @3% (percentage by weight of total mix).
Taking density 2.36 gm/c.c. Gross weight of
mix = 147 M.T.
MATERIALS:
Crushed stone aggregate and stone dust weight
= 147-8.085-4.41 = 134.505 M.T. Taking
density of stone aggregate as 1427kg./cum and
density of stone dust as 1523kg./cum and
taking stone aggregate 13.2mm @ 5% stone
aggregate 11.2mm @ 50% and stone dust @
45%
802

1159 Stone dust =60.527 M.T. cum 39.74 700.00 27,818.00
2202 Carriage of Stone aggregate . cum 51.84 53.21 2,758.41
2267 Carriage of Stone dust cum 39.74 53.21 2114.57
0777 Hydrated lime 147 M.T. @ 3%. quintal 44.10 177.00 7,805.70
2208 Carriage of Lime 4.41/1.29 M.T./ cum= 3.42 cum 3.42 53.21 181.98
cum
(B) Hire charges of machinery
Assuming effciency as 60% 7 hours working,
capacity 35 tonne (avg) per hours
Qty. of asphalt = 7x35x60/100=147 M.T.
No.
(62.29/0.04x460)
Fuel charges:
hours working = 3x4x7 = 84.00 litres
For drier , premixing and heating materials:
=94/100xl47=138.18M.T.
138.18 M.T. @ 5 ltr./m.T.= 690.90 litres
For burner
One steam, burner is to start two hours earlier
diesel required for/two hours per day @ 20 ltr.
per hours =2x20=40.00 litres
for 7 hrs. @ 10 ltr./ hrs=7x 10=70.00 litres
Diesel for road roller = 3.39 days @ 18 ltr./
day = 60.02 litres.
Diesel for loader @ 11.25 ltr/ each = 11.25
ltrs
Diesel for tipper
As per DAR Vol. 1 lead 5 km., No, of trips =
5.19 Nos. Diesel required = 11.58 ltrs and
carrying capacity = 8 tonne
147.00x11.58/5.19x8,=41.00 ltrs
1235 Total = 998.17 ltr litre 998.17 30.25 30,194.64
Mobil oil:
For 41.52 M.T. = 0.414 ltr
5001 For 147 M.T.= 0.414/41.52x147=1.47 ltr litre 1.47 95.00 139.65
(D) labour charge
and for taking levels etc.
0114 Beldar (5.00+6.00=11.00 Nos.) Day 11.00 135.25 1487.75
0113 Chowkidar Day 3.00 135.25 405.75
0130 Mistry Day 1.00 151.50 151.50
0101 Bhisti for road roller = 147/(2.36x0.04x460) Day 3.39 138.45 469.35
Total 369,030.58
Add 1% for water charges 3,690.31
Total 372,720.89
overheads. 428,629.02
Cost for 62.29 cum 6,881.19
Say
803
16.59 Manufacturing supplying and fixing retro reflective sign boards made up of 2mm
thick aluminium sheet, face to be fully covered with high intensity encapsulated
type heat activated retro reflective sheeting conforming to type - IV of ASTM-D
4956-01 in blue and silver white or other colour combination including subject
matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted
on substrate by an adhesive backing which shall be activated by applying heat
and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with
suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S.
angle iron of size 25x25x3 mm alongwith theft resistant measures, mounted and
fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up of M.S.
Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the
bottom end and including making holes in pipes, angles flats, providing & fixing
M.S. message plate of required size steel work to be painted with two or more
coats of synthetic enamel paint of required shade and of approved brand &
manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee
support to be painted in black and white colours). Backside of aluminium sheet to
be painted with two or more coats of epoxy paint over and including appropriate
priming coat including all leads and lifts etc. complete as per drawing . specification
and direction of Engineer-in-charge.
16.59.1 Mandatory/ Regulatory sign boards of 900mm diametre withpart as length of
3750mm.
Details cost for 1 no. of 0.636 sqm
Materials3.14/4x(0.90x0.90)= 0.636 sqm
Aluminium sheet 2 mm thick
add 10% wastage = 0.064 i.e. 0.700sqm @
5.60kg/sqm = 3.92kg
2704 Cost of Aluminium sheet 2mm thick. kilogram 3.92 195.00 764.40
Carriage of aluminium sheet
2302 3.92kg or 0.00392 M.T. tonne 0.00392 47.29 0.19
High intensity retro reflective sheet = 0.70
sqm.
High intensity sheet for lettering / sign and
border etc.
Taking 40% Area =0.28sqm,total = 0.70 +
0.28= 0.98 sqm
8690 High intensity retro - reflective sheet. sqm 0.98 1,400.00 1,372.00
Steel work
Supporting frame 25x25x3mm for 900mm dia
board:-
3.14D=3.1416x0.90=2.83 metre
@1.10kg/m =3.11kg
Angle iron 35x35x.5mm for fixing the support
frame with vertical Tee-iron support post
2x0.05=0.10m @ 2.6 kg/m = 0.26kg
Vertical post of M.S. tee of section
ISNT 50x50x6mm = 3.75 metre
@4.50kg/m= 16.88 kg
Base plate to be welded at bottom end of tee
(As hold fast)
(100xl00x5mm)x7850/69)=0.39kg, total =
3.11 + 0.26 +16.88 + 0.39 = 20.64kg.
Add wastage @ 5% = 1.03
Total = 20.64 + 1.03 = 21.67kg.
804

Rate as per item no 10.2 kg. 21.67 46.35 1004.40(A)
Labour.
0128 Mate Day 0.01 138.45 1.38
0114 Beldar Day 0.25 135.00 33.81
9999 Cost of material for drilling holes, nut bolts & L.S. 65.00 1.00 65.00
rivets, fabrication etc.
Painting with synthetic enamel paint on steel
work
support frame 25x25x3mm
=2.83x0.10=0.283 sqm
Fixing angle 35x35x5mm
= 2x0.50x0.14=0.014 sqm
Vertical post Tee 50x50x6mm
=3.75x0.20=0.750sqm
Baseplate 100xl00x5mm
Surface area = 2x[0.10x0.10] =0.02
4x0.10x0.005 = 0.002
total = 1.069 sqm
Rate as per item no 13.61.1 of SH : Finishing sqm 1.07 33.25 35.58(A)
(A).
Painting with epoxy paint on back side of sqm 0.636 75.25 47.86(A)
aluminium sheet.
Rate as per Item no. 13.52.1
9999 Sundries and hold fast etc. L.S. 78.00 1.00 78.00
Total 3,402.62
Add for water charge @ 1% except on (A). 23.15
Total 3,425.77
15% except on (A).
Cost of 1 no. 3,776.46
Say 3,776.45
16.59 Manufacturing supplying and fixing retro reflective sign boards made up of 2mm
thick aluminium sheet, face to be fully covered with high intensity encapsulated
type heat activated retro reflective sheeting conforming to type - IV of ASTM-D
4956-01 in blue and silver white or other colour combination including subject
matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted
on substrate by an adhesive backing which shall be activated by applying heat
and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with
suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S.
angle iron of size 25x25x3 mm alongwith theft resistant measures, mounted and
fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up of M.S.
Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the
bottom end and including making holes in pipes, angles flats, providing & fixing
M.S. message plate of required size steel work to be painted with two or more
coats of synthetic enamel paint of required shade and of approved brand &
manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee
support to be painted in black and white colours). Backside of aluminium sheet to
be painted with two or more coats of epoxy paint over and including appropriate
priming coat including all leads and lifts etc. complete as per drawing . specification
and direction of Engineer—in-charge.
805
16.59.2 Cautionary /warning sign boards of equilateral triangular shape having each side
of 900mm with support length of 3650mm.
Details cost for 1 board of 0.35 sqm
Materials Area 1/2x(0.90x0.78)= 0.35 sqm
Aluminium sheet 2 mm thick
add 10% wastage = 0.04 i.e. 0.39sqm @
5.60kg/sqm = 2.18kg
2704 Cost of Aluiminium sheet 2mm thick. kilogram 2.18 195.00 425.10
Carriage of sheet
2302 2.18kg or 0.00218 M.T. tonne 0.00218 47.29 0.10
sqm.
High intensity sheet for lettering / sign/
symbol/ border etc.
Taking 40% Area =0.16sqm, total = 0.39 +
sqm
0.16 = 0.55 sqm
8690 High intensity retro - reflective sheet. sqm 0.55 1400.00 770.00
Steel work
Angle iron frame 25x25x3mm 3x0.90=2.70
metre
@ 1.10kg/m =2.97kg
Angle iron 35x35x0.50mm for fixing the support
frame to Tee- iron support post
2x0.05=0.10m @ 2.6 kg/m = 0.26kg
Vertical post of M.S. tee of section
ISNT 50x50x6mm = Ix3.65=3.65m @
4.50kg/m= 16.43kg
Base plate 100x100x5mm connected to
bottom end of vertical tee.
(0.10x0.10x0.005x7850kg =0.39kg, total =
2.97 + 0.26 + 16.43 + 0.39 = 20.05kg.
Add wastage @ 5% = 1.00, total = 20.05 +
1.00 = 21.05kg
Rate as per item no 10.2 kg 21.05 46.35 975.67 (A)
Labour.
0128 Mate Day 0.01 138.45 1.38
0114 Beldar Day 0.25 135.25 33.81
rivets, fabrication etc.
Painting with synthetic enamel paint on Angle
iron .
support frame 25x25x3mm
=1x2.7x0.10=0.27 sqm.
Angle 35x35x5mm
= 2x0.50x0.14=0.014 sqm
Tee 50x50x6mm
= 1x3.65x0.20 =0.73sqm
Base plate to be welded at bottom end of Tee
100xl00x5mm
0.022 sqm
Total = 1.036 sqm
Rate as per item no 13.61.1 Finishing sqm 1.036 33.25 34.45
Painting with epoxy paint on back side of
aluminium sheet. 0.35 sqm
806

Rate as per Item no. 13.52.1 sqm 0.35 75.25 26.34
9999 Sundries & hold fast etc. L.S. 65.00 1.00 65.00
Total 2,396.85
Add for water charges @ 1% except on (A). 13.60
9999 Total 2,410.45
15% except on (A).
Cost of 1 board. 2,616.55
Say 2,616.55
16.60 Manufacturing supplying and fixing retro reflective overhead signage boards made
up of 2mm thick aluminium sheet face to be fully covered with high intensity and
encapsulated lens type heat activated retro reflective sheeting conforming to type -
III of ASTM-D-4956-01 as approved by Engineer-in-charge letters, borders etc. as
per IRC : 67-2001 in silver white with blue colour back ground and with high intensity
grade, pasted on substrate by pressure sensitive adhesive backing which shall be
activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing
the same to the plate of structural frame work by means of suitable sized aluminium
alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as
well as in two vertical rows alongwith theft resistant measures including the cost
of painting with two’or more coats of epoxy paint in grey colour on the back side
of aluminium sheet including appropriate priming coat. The rate includes the cost
of rounding off the corners, lowering down the structural frame work from the
gantry, fixing and erecting the same in position all complete as per drawings,
specification and direction of the engineer-in-charge. (Structural frame work
including M.S. plate to be provided separately. Rectangular area of the sheet only
shall be measured for payment).
16.60.1 Overhead informatory road signage.
Details of cost for boards area 3.00x1.20=3.60
sqm
2704 Aluminium sheet 2mm thick =3.60 sqm@ kilogram 21.17 195.00 4128.15
5.60kg/sqm = 20.16 kg
Add 5% wastage = 1.01 kg=
Total 20.16+1.01=21.17 kg
2302 Carnage of sheet. tonne 0.02117 47.29 1.00
(b) High intensity retro reflective sheet. 3.60
sqm
8690 high itensity sheet for written matter.
Taking 40% = 3.60x40% = 1.44 sqm.
Total = 3.60 + 1.44 = 5.04 sqm.
0588 High intensity retro - reflective sheet. sqm 5.04 1400.00 7056.00
(c) C.P. Brass rivets screws etc.
for peripheries = 2x(300+120)/30=28 nos.
For vertical Rows = 2x (120/30-2)=4 nos.
Total= 28 + 4 = 32nos.
For wastage @ 5% =2 nos.
Total = 32 +2 = 34 nos.
Chromium plated Brass screws 25 mm 100 Nos 34.00 83.00 28.22
Labour charges for drilling holes
9999 Hire charges of drill machine and sundries L.S. 52.00 1.00 52.00
9999 Hoisting board L.S. 390.00 1.00 390.00
807

Labour charges for manufacturing of board
including.
9999 fixing retro reflective sheet L.S. 564.00 1.00 564.00
Painting with epoxy paint on back side of sqm 3.60 75.25 270.90(A)
Aluminium sheet, Rate as per Item no.
13.52.1
Total 12,490.47
Total 12,612.67
Add for contractor’s profit and overheads 15% 1851.27
except on (A).
Cost of 3.60 sqm 14,463.94
Cost of 1 sqm. 4,017.76
Say 4,017.75
16.61 Providing Retro-reflective regulatory sign board of size 900mm dia meter made out
of 2mm thick aluminium sheet, face to be fully covered with high intensity
encapsulated lens type retro -reflective sheeting as approved by Engineer-in-charge.
Letter , symbols, borders etc. will be as per IRC - 67 with required colour scheme on
the boards and with the high intensity grade A. The aluminium sheet to be riveted
to M.S. frame of angle iron of stze 40x40x4mm The boards will be fixed to 1 No.
50x50mm square post made of M.S. angle 50x50x4m, 4m long welded to the frame
with adequate anti-theft arrangement .Sheet work to be painted with two or more
coats of synthetic enamel paint over an under coat (primer) and back side of
aluminium sheet to be painted with two or more coats of epoxy paint including
appropriate priming coat complete in all respects as per direction of Engineer-in-
charge.
Details cost for one board of 0.635 sqm

Aluminium sheet 2mm thick = 0.635 sqm.
Add 10% wastage = 0.06 sqm, total = 0.635 +
0.06 = 0 695 sqn
Say 0.70 sqm @ 5.60 kg/sqm =3.98 kg
2704 Cost of Alummiurfi sheet 2mm thick (X). kilogram 3.98 195.00 776.10
sqm
high intensity sheet for lettering/ sing and
border etc.
Taking 40% Area=0.28 sqm, total = 0.70 +
0.28 = 0.98 sqm.
8690 High intensity retro - reflective sheet (Y). sqm 0.98 1400.00 1,372.00
Angle iron 40x40x4mm = 4x0.60=2.40@
2.4kg/ mtr = 5.76 kg
50x50x5 mm = 2x4m =8m @ 3kg/ mtr =24.00
kg
Total = 5.76 + 24.00 = 29.76 kg
(A) Rate as per item no 10.2 kg 29.76 46.35 1,379.38(A)
Labour.
0128 Mate Day 0.01 138.45 1.38
0114 Beldar Day 0.25 135.25 33.81
rivets, facrication etc. @ 2% on (X+Y+A)
808

Painting with synthetic enamel paint
1x2.40x0.12=0.29 sqm
1x4.00x0.12=0.80 sqm, total = 0.29 + 0.80 =
1.09 sqm
Rate as per item no 13.61.1 sqm 1.09 33.25 36.24(A)
Painting with epoxy paint on back side of sqm 0.635 75.25 47.78
aluminium sheet, Rate as per Item no.13.52.1
9999 Sundries & hole fast etc, L.S. 31.20 1.00 31.20
Total 3,748.12
Add 1% for water charges except on (A). 22.85
Total 3,770.97
except on (A).
Cost for 1 board 4,117.11
Say 4,117.10
16.62 Providing and applying 2.5mm thick road marking strips (retro-reflective) of specified
shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic
paint applicator machine fitted with profile shoe, glass beads dispenser, propane
tank heater and profile shoe heater, driven by experienced operator on road surface
including cost of material, labour ,T&P, cleaning the road surface of all dirt, seals,
oil, grease and foreign material etc. complete as per direction of Engineer-in-charge
and accordance with applicable specifications.
Details of cost for 100.00 sqm (Area covered on

one day):-
Materials
Thermoplastic paint screeded in paint form for
2.5 mm thick road making stripe including
glass beads etc. as pe specifications.
100sqm @ 5kg/5sqm =500kg. wastage @ 5%
=25 kg
Total = 525 kg
8687 Thermoplastic paint kg 525 .00 67.22 35,290.50
Glass beads (B-class) to be sprayed over the
paint stripe @ 250 gms. Per sqm =
100x0.25=25 kg
8688 Glass beads kg 25.00 68.00 1,700.00
MACHINERY
0033 Hiring charges of paint applicator machine per day 1.00 680.00 680.00
0005 Hire charges of trucks for local shifting. Day 1.00 1008.00 1,008.00
1241 LPG cylinder of heating (Commercial cylinder kg 71.06 35.00 2 487.10
of 19.00 kg capacity)
Labour
0157 Machine operator. Day 1.00 166.00 166.00
0139 Skilled labour. Day 4.00 138.45 553.80
9999 Labour for cleaning for road surface. L.S. 364.00 1.00 364.00
0114 Beldar for erecting barricades, traffic Day 4.20 135.25 568.05
diversions, stretching ropes etc.
Total 42,817.45
Total 43,245.62
Add 15% for contractor’s profit and
overheads. 6,486.84
809

Cost for 100 sqm 49,732.46
Cost per sqm 497.32
Say 497.30
16.63 Providing and laying and making kerb channel 30cm wide and 50mm thick of cement
concrete 1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 20mm nominal
size) over 75mm bed of dry brick ballast 40 mm nominal size well rammed and
consolidated and grouted with fine sand including finishing the top smooth etc.
complete and as per direction of Engineer-in-charge.

Meterials
0287 Brick Aggregate 40 mm nominal size cum 1.00 360.00 360.00
2260 Carriage of Brick Aggregate cum 1.00 52.33 52.33
6501 Jamuna sand cum 0.08 175.00 14.00
Labour for spreading, ramming and
consolidation.
0114 Beldar Day 0.35 135.25 47.34
0115 Coolie Day 0.26 135.25 35.16
0101 Bhisti Day 0.18 138.45 24.92
Cement concrete-1:3:6 (Rate as per item no. 4.1.6) cum 0.50 2,713.05 1,356.53(A)
Total 1,900.04
Add for water charge @ 1 % except on (A). 5.44
Total 1,905.48
Add for contractor’s profit and overheads @
15% except on (A). 82.34
Say 198.80
16.64 Providing and laying 75mm thick compacted bed of dry brick aggregate of 40mm
thick nominal size including spreading, well ramming, consolidating and grouting
with jamuna sand including finishing smooth etc. complete as per direction of
Engineer-in-charge.

Meterials
0287 Brick Aggregate 40 mm nominal size cum 1.00 360.00 360.00
2260 Carriage of Brick Aggregate cum 1.00 57.83 57.83
6501 Jamuna sand cum 0.08 175.00 14.00
Labour for spreading, ramming and
consolidation.
0114 Beldar Day 0.35 135.25 47.34
0115 Coolie Day 0.26 135.25 35.16
0101 Bhisti Day 0.18 138.45 24.92
Total 543.51
Add for water charge @ 1 % except on (A). 5.44
Total 548.95
810

15% except on (A).
Say 63.15
16.65 Providing and fixing post delineators (made of ABS body fitted with 2 nose 100mm
dia ) reflective and reflectors are mounted on MS pipe of 65mm dia dully powder
coated anti-rust steel to be installed as per direction of Engineer-in-charge.

Details of cost for 1 no.
Materials.
8685 Delinator each 1.00 560.00 560.00
9999 Fixing charges. L.S. 78.00 1.00 78.00
9999 Fixing material L.S. 39.00 1.00 39.00
Total 677.00
Add for water charges @ 1% 6.77
Total 683.77
Add for contractor’s profit and overheads@ 102.57
15%
cost of 1 no. 786.34
Say 786.35
16.66 Excavating holes upto 0.10 cum including getting out the excavated soil, then
returning the soil as deported in layers not exceeding 20cm in depth including
consolidating and deposited layer by ramming watering etc. Disposing of surplus
excavated soil as directed with in a lead of 50m and lift upto 1.5 m.
16.66.1 All kind of soil.
Details of cost for 30 holes-

Earth work 30x0.10=3.00 cum
Extra labour for fillng and ramming
(A) Rate vide item no. 2.8.1 cum 3.00 103.40 310.20(A)
(B) Sundries L.S. 13.52 1.00 13.52
TOTAL 323.72
Add for water charges @ 1% except on (A) 0.14
TOTAL 323.86
(C) Add for contractor’s profit and over-heads@ 2.05
15%except on (A).
Cost of 30 holes 325.91
Cost of 1 hole 10.86
Say 10.85
16.67 Providing and fixing at or near ground level factory made RCC pavement slab of
M-30 grade of size 450x450x50mm (HPL or equivalent ) including reinforcement
with 6mm dia M.S. bars 4 nose on each side including setting in position in
footpath to the required level and line over a bed of 20mm average thick cement
811
mortar 1:3 (1 cement : 3 coarse sand ) having thickness not more than 5mm
except on curve including filling of joints with same cement mortar and making
grooves etc. complete as per direction of Engineer-in-charge.
Materials
8694 Precast pavement slab 450 x 450 x 50mm (M-30) each 48.00 40.00 1920.00
9999 carriage of slab L.S. 52.00 1.00 52.00
9999 20mm (bed and joints) CM. 1:5 (1 cement: 5 cum 0.25 2260.15 565.04(A)
coarse sand (Rate as per item no. 3.10 of SH.
morter
Labour
0155 Mason. Day 1.10 146.55 161.21
0100 Bandhani Day 1.10 138.45 152.30
0114 Beldar Day 0.55 135.25 74.39
0101 Bhisti Day 0.27 138.45 37.38
9999 Sundries L.S. 10.79 1.00 10.79
Total 2,973.11
Add for water charges @ 1 % except on (A). 29.73
Total 3002.84
Add for contractor’s profit and overheads’s @ 450.43
15% except on (A).
Say 345.35
16.68 Providing and laying 60mm thick factory made cement concrete interlocking paver
block of M -30 grade made by block making machine with strong vibratory
compaction and of approved size and design/ shape laid in required colour and
pattern over and including 50mm thick compacted bed of course sand, filling the
joints with coarse sand etc. all complete as per the direction of Engineer-in-
charge.
Materials.
8689 Interlocking C.C. paver block ( 60 mm thick), M.30
Bedding Layer 50mm thick sqm 10.00 225.00 2,250.00
0982 Coarse sand =10x0.050=0.50 cum cum 0.50 600.00 300.00
2203 Carriage of coar sand cum 0.50 53.21 26.60
0983 Fine sand . cum 0.15 320.00 48.00
Laying charges (Bassed on actual observation)
0123 Mason -1st class Day 0.50 151.50 75.75
0124 Mason -2nd class Day 0.50 141.60 70.80
0114 Beldar Day 1.00 135.25 135.25
0115 Coolie Day 0.50 135.25 67.62
Total 2,982.00
Total 3,011.82
Cost for 10.00 sqm 3,463.59
Cost for 1.00 sqm. 346.36
Say 346.35
812
16.69 Providing and laying at or near ground level factory made kerb stone of M-25
grade cement in position to the required line, level and curvature jointed with
cement mortar 1:3(1 cement: 3 coarse sand ) including making joints with or
without grooves (thickness of joints except at sharp curve shall not to more
than 5mm) including making drainage opening wherever required complete etc.
as per direction of Engineer-in-charge (length of finished kerb edging shall be
measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-
in-charge).
Details of cost for 100.00 metre i.e.
100x0.375x0.20=7.50 cum.
No. of kerb stones = 100/0.405=247 Nos
8686 Precast C.C. Kerb stone M - 25 = cum 7.41 3500.00 25,935.00
247x0.40x0.375x0.20=7.41 cum
morter 1:3 for fixing joints
=246x[(0.115+0.20)]x0.375x0.005 = 0.073 cum
2
CM.1 :3 (1 cement: 3 coarse sand) cum 0.073 3169.60 231.38(A)
as per item no. 3.8 of SH mortar
Labour for fixing of Kerb stone
0114 Beldar Day 2.50 135.25 338.12
0115 Coolie Day 1.65 135.25 223.16
Total 27,460.41
Total 27,732.70
15% except on (A).
Cost of 7.50 cum 31,857.90
cost for 1 cum. 4,247.72
Say 4,247.70
16.70 Providing and fixing G.I. chain link fabric fencing of required width in mesh size
50x50mm including strengthening with 2mm dia wire or nuts, bolts and washers
as required complete as per the direction of Engineer-in-charge.
16.70.1 Made of G.I. wire of dia 4mm.
Material.
G.I. chain link 50x50 mm mesh = 10.00 sqm.
Wastage5% = 0.50sqm
Total= 10.50 sqm
8695 Chain link fabric fancing mesh of size sqm 10.50 225.00 2,362.50
50x50mm made of G.I. wire of dia. 4mm.
9999 Carriage. L.S. 156.00 1.00 156.00
Labour
0114 Beldar Day 1.62 135.25 219.10
9999 Sundries including G.I. wire, nuts and bolts L.S. 174.75 1.00 174.75
and warshers.
Total 3,215.37
Total 3,247.52
813

overheads.
Say 373.45
50x50mm including strengthening with 2mm dia wire or nuts, bolts and
washers as required complete as per the direction of Engineer-in-charge.
16.70.2 Made of G.I. wire of dia. 4mm, PVC coated to achieve outer dia. not less than
5mm in required colour and shade.
Material.
G.I. chain link 50x50 mm mesh PVC coated
= 10sqm
wastase@5%= 0.50 sqm
Total = 10.50 sqm.
8696 Chain link fabric fancing mesh of size sqm 10.50 250.00 2,625.00
50x50mm made of G.I. wire of dia. 4mm,
PVC coated to outer dia. 5mm.
9999 Carriage. L.S. 156.00 1.00 156.00
Labour
0114 Beldar Day 1.62 135.25 219.10
and warshers.
Total 3,477.87
Total 3,512.65
overheads.
Say 403.95
25x25 mm made of G.I. wire of dia. 3mm including strengthening with 2mm dia.
wire or nuts, bolts and washers as required complete as per the direction of
Engineer-in-charge.
Material.
G.I. chain link 25x25 mm mesh = 10.00 sqm.
wastase@5%= 0.50 sqm
8697 Cham link fabric fancing mesh of size sqm 10.50 300.00 3,150.00
25x25mm made of G.I. wire of dia. 3mm.
9999 Carriage. L.S. 156.00 1.00 156.00
Labour
0114 Beldar Day 1.62 135.25 219.10
814

and warshers.
Total 4,002.87
Total 4,042.90
overheads.
Say 464.95
16.72 Supplying and stacking of hard stone (for stone pitching) 22.5 cm thick at site.

MATERIALS
1158 22.5 cm thick stone (Hard) cum 2.25 332.00 747.00
2215 Carriage by mechanical transport i/c loading cum 2.25 62.60 140.85
unloading and stacking
TOTAL 887.85
Add1% for water charges 8.88
TOTAL 896.73
Cost for 2.25 cum 1,031.24
Cost for one cum 458.33
Say 458.35
16.73 Dry stone pitching 22.5cm thick laid in courses and required profile with hammer
dressed stones having no side less than 15 cm, with minimum depth of 20cm
including preparing the bedding surface etc. all complete. (Payment for Stone to
be made separately)
LABOUR
0123 Mason 1st class. Day 1.08 151.50 163.62
0124 Mason 2nd class. Day 1.08 141.60 152.93
0114 Belder Day 2.15 135.25 290.79
0115 Coolie Day 1.61 135.25 217.75
9999 Sundries L.S. 6.76 1.00 6.76
TOTAL 831.85
TOTAL 840.17
Cost for one sqm 96.62
Say 96.60
16.74 75 mm thick back filling for pitching including supplying of required materials
and consolidation etc. complete with:
16.74.1 Moorum
MATERIALS
0810 Moorum. cum 7.50 310.00 2325.00
815
2265 Carriage by mechanical transport i/c loading cum 7.50 53.21 399.08
unloading and stacking
LABOUR
0114 Beldar Day 1.64 135.25 221.81
0101 Bhisti Day 0.13 138.45 18.00
TOTAL 2,963.89
TOTAL 2,993.53
Cost per sqm 34.43
Say 34.45
16.74.2 Stone aggregate 20 mm nominal size.
Detail of cost for 100.00sqm
MATERIALS
0295 Stone aggregate 20mm nominal size cum 7.50 700.00 5,250.00
100sqm x7.50cm= 7.50 cum
2202 Carriage of stone aggregate 20mm nominal size cum 7.50 53.21 399.08
LABOUR
0114 Beldar Day 2.05 135.25 277.26
0101 Bhisti Day 0.13 138.45 18.00
TOTAL 5,944.34
TOTAL 6,003.78
Cost per sqm 69.04
Say 69.05
16.74.3 Stone aggregate 40 mm nominal size.
MATERIALS
0293 Stone aggregate .40 mm nominal size
100sqm x7.50cm= 7.50 cum cum 7.50 650.00 4875.00
2206 Carriage of stone aggregate 40mm nominal cum 7.50 57.83 433.72
size .
LABOUR
0114 Beldar Day 2.05 135.25 277.26
0101 Bhisti Day 0.13 138.45 18.00
TOTAL 5603.98
TOTAL 5660.02
Cost per sqm 65.09
Say 65.10
816
16.75 Providing and laying C.C. pavement of mix M25 with ready mixed concrete from
batching plant. The ready mixed concrete shall be laid and finished with screed
board vibrator , vacuum dewatering process and finally finished by floating,
brooming with wire brush etc. complete as per specifications and directions of
Engineer-in-charge. (The panel shuttering work shall be paid for separately ).
MATERIALS
Ready mix concrete M 25 = 1.00 cum. i/c
placing of concrete, vibrating, leveling etc.
(Rate as per item No. 5.37 of SH. R.C.C. cum 1.00 4356.50 4356.50 (A)
9999 Operational charges for vacuum dewatering L.S. 57.20 1.00 57.20
system i/c screed vibration , placing of filter
mat, top mat, vacuum process, floating ,
troweling, Brooming etc.
9999 T& P charges i/c consumable power charges, L.S. 41.60 1.00 41.60
loading , unloading and hire charges of
equipments
Total 4 455.30
Add for water charges @ 1% on all except on 0.99
(A)
Total 4 456.29
15% on all except (A)
Cost for 1 cum 4 471.26
Say 4 471.25
16.76 Deduct for using of M 20 grade concrete instead of M-25 grade concrete in C.C.
pavement.
Cement for M-25 mix = 0.410 t
0367 Cement for M- 20 mix = 0.383 t
Difference tonne 0.027 4500.00 121.50
Plasticizer for M-25 mix = 2.050kg
Plasticizer for M- 20 mix= 1.915 kg
7318 Difference = 0.135 kg kilogram 0.135 30.00 4.05
Total 126.83
Total 128.10
Add for contractor’s profit and overhead @ 19.22
15%
Say 147.30
16.77 Scarifiying the existing bituminous road surface to depth of 50mm and disposal of
scarified material withyin all lifts and lead upto 1000 metre (by mechanincal means).

LABOUR
0128 Mate Day 0.01 138.45 1.38
0114 Beldar Day 0.25 135.25 33.81
817

MACHINERY
0038 Tractor with ripper attachment. per day 0.01 1000.00 10.00
0014 Front end loader Day 0.025 6000.00 150.00
0017 Hire and runining charges of tipper Day 0.02875 1030.00 29.61
TOTAL 224.80
Add for water charges 1% 2.25
total 227.05
Cost for 1 sqm 2.61
Say 2.60
819
SUB HEAD : 17.0

SANITARY INSTALLATIONS
821
17.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm
sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually
controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures
complete including cutting and making good the walls and floors wherever required :
17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type
foot rests.
Details of cost for one pan

MATERIALS
1,954 White Vitreous china Orrisa pattern W.C. pan each 1.00 700.00 700.00
7,358 10 litre low level P.V.C. flushing cistern with each 1.00 570.00 570.00
fitting accessories and flush pipe
1,896 100 mm Sand C.I. ‘P’ or’S’ trap with vent horn each 1.00 260.00 260.00
9,999 Cement, sand and grit etc. L.S. 26.91 1.00 26.91
9,999 Carriage of materials L.S. 26.91 1.00 26.91
LABOUR
0116 Fitter 1st class Day 1.25 151.50 189.38
0114 Beldar Day 1.00 135.25 135.25
TOTAL 1,984.20
TOTAL 2,004.04
Cost for 1 pan 2,304.65
Say 2,304.65
17.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm
sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually
controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures
17.1.2 Stainless Steel AISI-304(18/8) Orissa pattern W.C. pan of size 585x480 mm with flush
pipe and integrated type foot rests.
MATERIALS
7805 Salem Stainless steel AISI - 304 (18/8) Orrisa each 1.00 3,350.00 3,350.00
pattern W.C. pan 724mm X 578mm
7358 10 litre low level P.V.C. flushing cistern with each 1.00 570.00 570.00
1896 100 mm Sand C.I. ‘P’ or’S trap with vent horn each 1.00 260.00 260.00
9999 Cement, sand and grit etc. L.S. 26.91 1.00 26.91
LABOUR
0114 Beldar Day 1.00 135.25 135.25
TOTAL 4,634.20
TOTAL 4,680.54
Say 5,382.60
822
17.2 Providing and fixing white vitreous china pedestal type water closet (European type
W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually
controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures
17.2.1 W.C. pan with ISI marked white solid plastic seat and lid

MATERIALS
1875 White solid plastic seat and lid with C.P. brass each 1 .00 275.00 275.00
hinges and rubber buffers complete
1955 White vitreous china pedestal type W.C. pan each 1.00 554.00 554.00
7358 10 litre low level C.I. flushing cistern with each 1.00 570.00 570.00
LABOUR
0114 Beldar Day 1.00 135.25 135.25
TOTAL 1,853.20
TOTAL 1,871.73
Say 2,152.50
17.2 Providing and fixing white vitreous china pedestal type water closet (European type
W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually
controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures
17.2.2 W.C. pan with ISI marked black solid plastic seat and lid

MATERIALS
1876 Black solid plastic seat and lid with C.P.brass each 1.00 250.00 250.00
7358 10 litre low level C.I. flushing cistern with each 1.00 570.00 570.00
LABOUR
0114 Beldar Day 1.00 135.25 135.25
TOTAL 1,828.20
TOTAL 1,846.48
Say 2,123.45
823
17.3 Providing and fixing white vitreous china pedestal type water closet (European type)
with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush
bend with fittings & C.I. brackets, 40mm flush bend, overflow arrangement with
specials of standard make and mosquito proof coupling of approved municipal design
complete including painting of fittings and brackets, cutting and making good the
walls and floors wherever required :
17.3.1 W.C. pan with ISI marked white solid plastic seat and lid.

MATERIALS
1875 White solid plastic seat and lid with C.P. brass each 1.00 275.00 275.00
1955 White glazed pedestal type W.C. pan each 1.00 554.00 554.00
7006 10 litre white glazed vitreous china low level each 1.00 1,390.00 1,390.00
flushing cistern with fitting and bracket and
40 mm white C.P. flush bend
9999 Overflow arrangement and specials for L.S. 62.79 1.00 62.79
oveflow pipe
1350 Mosquito proof coupling of the approved each 1.00 23.00 23.00
municipal design
9,999 Plugs,screws etc. L.S. 13.52 1.00 13.52
9,999 Red lead, white lead and gasket L.S. 16.12 1.00 16.12
LABOUR
0114 Beldar Day 1.00 135.25 135.25
TOTAL 2,826.50
TOTAL 2,854.76
Say 3,282.95
17.3 Providing and fixing white vitreous china pedestal type water closet (European type)
with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush
bend with fittings & C.I. brackets, 40mm flush bend, overflow arrangement with
specials of standard make and mosquito proof coupling of approved municipal design
complete including painting of fittings and brackets, cutting and making good the
walls and floors wherever required :
17.3.2 W.C. pan with ISI marked black solid plastic seat and lid.

MATERIALS
1876 Black solid plastic seat and lid with C.P. brass each 1.00 250.00 250.00
1955 Vitreous china pedestal type W.C. pan each 1.00 554.00 554.00
7006 10 litre white vitreous china low level flushing each 1.00 1390.00 1390.00
cistern with fitting and bracket and 40 mm
white C.P. flush bend
9999 Overflow arrangement and specials for L.S. 62.79 1.00 62.79
oveflow pipe
824
municipal design
9999 Plugs ,screws etc. L.S. 13.52 1.00 13.52
9999 Red lead, white lead and gasket L.S. 16.12 1.00 16.12
LABOUR
0114 Beldar Day 1.00 135.25 135.25
TOTAL 2,801.50
TOTAL 2,829.52
Say 3,253.95
17.4 Providing and fixing white vitreous china flat back or wall corner type lipped front
urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with
automatic flushing cistern with standard flush pipe and C.P. brass spreaders with
brass unions and G.I clamps complete, including painting of fittings and brackets,
cutting and making good the walls and floors wherever required :
17.4.1 One urinal basin with 5 litre white P.V.C. automatic flushing cistern.

Details of cost for one no.
MATERIALS
1913 Flat back or angular lipped front urinal basin each 1.00 380.00 380.00
of 430x260x350 mm and 340x410x265 mm
sizes respectively of white vitreous china
7359 5 litre PVC automatic flushing cistern with each 1.00 430.00 430.00
fitting
7375 Standard size G.I. Flush pipe with brass each 1.00 352.00 352.00
unions and clamps including C.P. brass
spreaders
9999 Painting of fittings etc. L.S. 39.00 1.00 39.00
LABOUR
0114 Beldar Day 1.50 135.25 202.88
TOTAL 1,737.99
TOTAL 1,755.37
Cost for one no 2,018.68
Say 2,018.70
825
17.4.2 Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern.
MATERIALS
of 430x260x350 mm and 340x410x265 mm
sizes respectively of white glazed vitreous
china
fitting
spreaders
9999 Plugs,screws etc. L.S. 20.28 1.00 20.28
LABOUR
0114 Beldar Day 2.00 135.25 270.50
TOTAL 2,921.75
TOTAL 2,950.97
Say 3,393.60
17.4.3 Range of three urinal basins with 10 litre white P.V.C. automatic flushing cistern.

MATERIALS
of 430x260x350 mm and 340x410x265 mm
fitting
spreaders
826
LABOUR
0114 Beldar Day 3.00 135.25 405.75
TOTAL 3,867.06
TOTAL 3,905.73
Cost for one no. 4,491.59
Say 4,491.60
17.4.4 Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern.

MATERIALS
1913 Flat back or angular lipped front urinal basin each 4.00 380.00 1,520.00
of 430x260x350 mm and 340x410x265 mm
fitting
7378 Standard size G.I. Flush pipe with brass each 1.00 1 530.00 1,530.00
spreaders
9999 Plugs,screws etc. L.S. 53.82 1.00 53.82
LABOUR
0114 Beldar Day 4.00 135.25 541.00
TOTAL 5,219.28
TOTAL 5,271.47
Say 6,062.20
827
17.5 Providing and fixing white vitreous china flat back half stall urinal of size
580x380x350mm with white PVC automatic flushing cistern, with fittings, standard
size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with
waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P.
brass including painting of fittings and cutting and making good the walls and floors
wherever required :
17.5.1 Single half stall urinal with 5 litre P.V.C. automatic flushing cistern.
MATERIALS
7379 Half stall urinals of white vitreous china with each 1.00 1224.00 1 224.00
waste fittings
fitting
1532 Standard size flush pipe with unions, spreaders each 1.00 204.00 204.00
and clamps all in C.P. brass
1891 50 mm diameter standard urinal C.I. Trap with each 1.00 125.00 125.00
vent arm outlet grating other couplings in C.P.
brass
LABOUR
0114 Beldar Day 4 .00 135.25 541.00
TOTAL 3,203.01
TOTAL 3,235.04
Say 3,720.30
brass including painting of fittings and cutting and making good the walls and
floors wherever required :
17.5.2 Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern.

MATERIALS
7379 Two half stall urinals of white vitreous china each 2.00 1,224.00 2,448.00
with waste fittings
fitting
brass
828

LABOUR
0114 Beldar Day 6.00 135.25 811.50
TOTAL 5,131.94
TOTAL 5,183.26
Say 5,960.75
wherever required :
17.5.3 Range of three half stall urinals with 10 litre P.V.C. automatic flushing cistern.

MATERIALS
7379 Three half stall urinals of white vitreous china each 3.00 1,224.00 3,672.00
with waste fittings
fitting
brass
LABOUR
0114 Beldar Day 7.00 135.25 946.75
TOTAL 6,832.99
TOTAL 6,901.32
Say 7,936.50
829
wherever required :
17.5.4 Range of four half stall urinals with 10 litre P.V.C. automatic flushing cistern.

MATERIALS
7379 Four half stall urinals of white vitreous china each 1.00 1,224.00 4,896.00
with waste fittings
fitting
brass
LABOUR
0114 Beldar Day 8.00 135.25 1,082.00
TOTAL 8,447.17
TOTAL 8,531.64
Say 9,811.40
17.6 Providing and fixing one piece construction white vitreous china squatting plate
with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern,
with fittings, standard size G.I. flush pipe for back and front flush with standard
spreader pipes with fittings, G.I clamps and C.P. brass coupling complete including
painting of fittings and cutting and making good the walls and floors etc. wherever
required :
17.6.1 Single squatting plate with 5 litre P.V.C. automatic flushing cistern.
MATERIALS
1915 Squatting plate of white glazed vitreous china each 1.00 610.00 610.00
fitting
1540 G.I. Flush pipe of standard size with spreaders each 1.00 138.00 138.00
fittings
830

LABOUR
0114 Beldar Day 3.00 135.25 405.75
TOTAL 2,059.86
TOTAL 2,080.46
Say 2,392.55
required :
17.6.2 Range of two squatting plates with 5 litre P.V.C. automatic flushing cistern.

MATERIALS
1915 Squatting plate of white glazed vitreous china each 2.00 610.00 1,220.00
fitting
fittings
LABOUR
0114 Beldar Day 4.00 135.25 541.00
TOTAL 3,054.77
TOTAL 3,085.32
Say 3,548.10
required :
831
17.6.3 Range of three squatting plates with 10 litre P.V.C. automatic flushing cistern.

MATERIALS
fitting
fittings
LABOUR
0114 Beldar Day 5.00 135.25 676.25
TOTAL 4,074.40
TOTAL 4,115.14
Say 4,732.40
required :
17.6.4 Range of four squatting plates with 10 litre P.V.C. automatic flushing cistern.
MATERIALS
fitting
fittings
LABOUR
0114 Beldar Day 5.50 135.25 743.88
TOTAL 4,984.47
TOTAL 5,034.31
Say 5,789.45
832
17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32
mm C.P. brass waste of standard pattern, including painting of fittings and brackets,
cutting and making good the walls wherever require :
17.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass
pillar taps.
MATERIALS
1947 630x450 mm flat back wash basin of white each 1.00 585.00 585.00
vitreous china
1885 15 mm C.P. brass piller taps each 2.00 103.00 206.00
1951 32 mm diameter C.P. brass waste of standard each 1.00 48.00 48.00
pattern
1309 C.I./M.S. brackets pair 1.00 48.00 48.00
9999 Painting of brackets, fittings etc. L.S. 26.91 1.00 26.91
LABOUR
0114 Beldar Day 0.67 135.25 90.62
TOTAL 1,147.56
TOTAL 1,159.04
Say 1,332.90
17.7.2 White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass
pillar tap.
MATERIALS
vitreous china
pattern
LABOUR
0114 Beldar Day 0.63 135.25 85.21
TOTAL 1,034.60
833

TOTAL 1,044.95
Say 1,201.70
17.7.3 White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass
pillar taps.
MATERIALS
vitreous china
pattern
LABOUR
0114 Beldar Day 0.67 135.25 90.62
TOTAL 1,012.56
TOTAL 1,022.69
Say 1,176.10
17.7.4 White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P.
brass pillar tap.

MATERIALS
vitreous china
pattern
834
LABOUR
0114 Beldar Day 0.63 135.25 85.21
TOTAL 899.60
TOTAL 908.60
Say 1,044.90
17.7.5 White Vitreous China Angle back wash basin size 600x480 mm with single 15 mm
C.P. brass pillar tap.

MATERIALS
1949 600x480 mm angle back wash basin of white each 1.00 540.00 540.00
vitreous china
pattern
LABOUR
0114 Beldar Day 0.63 135.25 85.21
TOTAL 989.60
TOTAL 999.50
Say 1,149.45
835
17.7.6 White Vitreous China Angle back wash basin size 400x400 mm with single 15 mm
C.P. brass pillar tap.
MATERIALS
vitreous china
pattern
LABOUR
0114 Beldar Day 0.63 135.25 85.21
TOTAL 796.60
TOTAL 804.57
Cost for one no. 925.26
Say 925.25
17.7.7 White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P.
brass pillar tap.
MATERIALS
vitreous china
pattern
LABOUR
0114 Beldar Day 0.63 135.25 85.21
TOTAL 809.60
TOTAL 817.70
Cost for one no 940.36
Say 940.35
836
17.7.8 White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of L5
mm C.P. brass pillar taps with elbow operated levers.
MATERIALS
3213 660x460 mm Surgeon type wash basin of each 1.00 810.00 810.00
white vitreous china
7363 15 mm C.P. brass piller taps (elbow operated each 2.00 396.00 792.00
lever)
pattern
LABOUR
0114 Beldar Day 0.67 135.25 90.62
TOTAL 1,958.56
TOTAL 1,978.15
Say 2,274.85
17.7.9 White Vitreous China Surgeon type wash basin of size 660x460 mm with single 15
mm C.P. brass pillar taps with elbow operated levers ISI marked.
MATERIALS
3213 660x460 mm Surgeon type wash basin of each 1.00 810.00 810.00
white vitreous china
7363 15 mm C.P. brass piller taps (elbow operated each 1.00 396.00 396.00
lever)
pattern
LABOUR
0114 Beldar Day 0.63 135.25 85.21
TOTAL 1,552.60
837

TOTAL 1,568.13
Say 1,803.35
17.7.10 Stainless Steel AISI-304(18/8) Round basin 405x355 mm with single 15 mm C.P.
brass pillar tap.
Details of cost for one no
MATERIALS
7806 Salem Stainless steel AISI - 304 (18/8) Round each 1.00 1,500.00 1,500.00
basin 405mm X 355mm
pattern
LABOUR
0114 Beldar Day 0.63 135.25 85.21
TOTAL 1,949.60
TOTAL 1,969.10
Say 2,264.45
17.7.11 Stainless Steel AISI-304(18/8) Wash basin 530x345 mm with single 15 mm C.P. brass
pillar tap.
MATERIALS
7807 Salem Stainless steel AISI - 304 (18/8) Wash each 1.00 1,350.00 1,350.00
basin 530mm X 345mm
pattern
838

LABOUR
0114 Beldar Day 0.63 135.25 85.21
TOTAL 1,799.60
TOTAL 1,817.60
Say 2,090.25
17.8 Providing and fixing white vitreous china pedestal for wash basin completely
recessed at the back for the reception of pipes and fittings.
Details of cost for one pedestal
MATERIALS
1396 White vitreous china pededstal each 1.00 527.00 527.00
9999 White cement mortar L.S. 40.30 1.00 40.30
TOTAL 607.73
TOTAL 613.81
Cost for one no. 705.88
Say 705.90
17.9 Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber
plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets,
cutting and making good the walls wherever required :
17.9.1 White glazed fire clay kitchen sink of size 600x450x250 mm.

MATERIALS
1863 White glazed fire clay kitchen sink of size each 1.00 1,192.00 1,192.00
600x450x250 mm
1309 C.I. Bracket pair 1.00 48.00 48.00
1315 C.P. brass chain with 40 mm rubber plug each 1.00 22.00 22.00
1952 40 mm C.P. brass waste each 1.00 53.00 53.00
9999 Painting brackets etc. L.S. 26.91 1.00 26.91
LABOUR
0114 Beldar Day 0.56 135.25 75.74
TOTAL 1,544.01
TOTAL 1,559.45
Say 1,793.35
839
17.10 Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS 13983
with C.I. brackets and stainless steel plug 40 mm including painting of fittings
and brackets, cutting and making good the walls wherever required:
17.10.1 Kitchen sink with drain board
17.10.1.1 510x1040 mm bowl depth 250mm.

MATERIALS
7095 Stainless steel kitchen sink - with drain board each 1.00 4900.00 4,900.00
bowl depth 250 mm.
1309 C.I. Brackets pair 2.00 48.00 96.00
9999 Painting brackets L.S. 26.91 1.00 26.91
LABOUR
0114 Beldar Day 0.82 135.25 110.90
TOTAL 5,298.60
TOTAL 5,351.59
Say 6,154.35
17.10.1.2 510x1040 mm bowl depth 225mm.

MATERIALS
7096 Stainlees steel kitchen sink - with drain board each 1.00 4,600.00 4,600.00
510 x 1040mm bowl depth 225 mm.
1309 C.I. Brackets pair 2.00 48.00 96.00
LABOUR
0114 Beldar Day 0.82 135.25 110.90
TOTAL 4,998.60
TOTAL 5,048.59
Say 5,805.90
840
and brackets, cutting and making good the walls wherever required :
17.10.1.3 510x1040 mm bowl depth 200mm.

MATERIALS
7097 Stainlees steel kitchen sink - with drain board each 1.00 4,100.00 4,100.00
510 x 1040mm bowl depth 200 mm.
1309 C.I. Brackets pair 2.00 48.00 96.00
LABOUR
0114 Beldar Day 0.82 135.25 110.90
TOTAL 4,498.60
TOTAL 4,543.59
Say 5,225.15
17.10 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983
17.10.1.4 510x1040 mm bowl depth 178mm.
MATERIALS
7,098 Stainless steel kitchen sink - with drain board each 1.00 2,600.00 2,600.00
510xl040mm bowl depth 178 mm
1,309 C.I. Brackets pair 2.00 48.00 96.00
9,999 Painting brackets L.S. 26.91 1.00 26.91
LABOUR
0114 Beldar Day 0.82 135.25 110.90
TOTAL 2,998.60
TOTAL 3,028.59
Say 3,482.90
841
with C.I. brackets and stainless steel plug 40 mm including painting of fittings and
brackets, cutting and making good the walls wherever required :
17.10.2 Kitchen sink without drain board
17.10.2.1 610x510 mm bowl depth 200 mm.

MATERIALS
7101 Stainless steel kitchen sink - without drain each 1.00 2,700.00 2,700.00
board 610x510mm bowl depth 200 mm
1309 C.I. Brackets pair 1.00 48.00 48.00
LABOUR
0114 Beldar Day 0.56 135.25 75.74
TOTAL 2,961.02
TOTAL 2,990.63
Say 3,439.20
17.10.2.2 610x460 mm bowl depth 200 mm.
MATERIALS
1309 C.I. Brackets pair 1.00 48.00 48.00
LABOUR
0114 Beldar Day 0.56 135.25 75.74
TOTAL 2,761.02
TOTAL 2,788.63
Say 3,206.90
842
and brackets, cutting and making good the walls wherever required :
17.10.2.3 470x420 mm bowl depth 178 mm.
MATERIALS
1309 C.I. Brackets pair 1.00 48.00 48.00
LABOUR
0114 Beldar Day 0.56 135.25 75.74
TOTAL 1,861.02
TOTAL 1,879.63
Say 2,161.55
17.11 Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P.
brass chain with rubber plug 40mm C.P brass waste and 40mm C.P. brass trap
with necessary C.P. brass unions complete including painting of fittings and
brackets, cutting and making good the wall wherever required :
17.11.1 Size 450x300x150mm
MATERIALS
1871 White vitreous china laboratory sink of size each 1.00 664.00 664.00
450x300x150 mm
1309 C.I. bracket for wash basin and sinks pair 1.00 48.00 48.00
1952 C.P. brass waste 40 mm each 1.00 53.00 53.00
1895 40 mm C.P. brass trap each 1.00 99.00 99.00
3617 40 mm C.P. brass union each 1.00 130.00 130.00
9999 Red lead, white lead and gaskit L.S. 16.12 1.00 16.12
9999 Sundries L.S. 26.91 1.00 26.91
LABOUR
0114 Beldar Day 0.56 135.25 75.74
TOTAL 1,245.01
TOTAL 1,257.46
Cost for 1 no. 1,446.08
Say 1,446.10
843
17.11 Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P.
brass chain with rubber plug 40mm C.P brass waste and 40mm C.P. brass trap
with necessary C.P. brass unions complete including painting of fittings and
brackets, cutting and making good the wall wherever required :
17.11.2 Size 600x450x200mm
MATERIALS
1872 White vitreous china laboratory sink of size each 1.00 1,400.00 1,400.00
600x450x200 mm
1309 C.I. bracket for wash basin and sinks pair 1.00 48.00 48.00
1952 C.P. brass waste 40 mm each 1.00 53.00 53.00
1895 40mm C.P. brass trap each 1.00 99.00 99.00
3617 C.P. brass union, 40mm dia each 1.00 130.00 130.00
9999 Red lead, white lead and gaskit L.S. 16.12 1.00 16.12
9999 Sundries L.S. 26.91 1.00 26.91
LABOUR
0114 Beldar Day 0.56 135.25 75.74
TOTAL 1,981.01
TOTAL 2,000.82
Cost for 1 no 2,300.94
Say 2,300.95
17.12 Providing and fixing draining board with C.I. brackets including painting of brackets,
cutting and making good the walls wherever required :
17.12.1 White glazed fire clay draining board of size 600x450x25mm
MATERIALS
7364 White glazed fire clay draining board of size each 1.00 390.00 390.00
600x450x25 mm
1309 C.I./M.S. Brackets pair 1.00 48.00 48.00
9999 Painting brackets etc. L.S. 26.00 1.00 26.00
LABOUR
0114 Beldar Day 0.22 135.25 29.76
TOTAL 549.80
TOTAL 555.30
Cost for 1 no. 638.60
Say 638.60
844
17.13 Providing and fixing white vitreous china water closet squatting pan (Indian type)
17.13.1 Long pattern W.C. pan of size 580 mm
MATERIALS
1953 White glazed vitreous china long pan pattern each 1.00 290.00 290.00
squatting pan size 580 mm
LABOUR
0114 Beldar Day 0.50 135.25 67.62
TOTAL 460.28
TOTAL 464.88
Say 534.60
17.13 Providing and fixing white vitreous china water closet squatting pan (Indian type)
17.13.2 Orissa pattern W.C. pan of size 580x440 mm

MATERIALS
1954 White glazed vitreous china Orissa pattern each 1.00 700.00 700.00
squatting pan size 580 mm
LABOUR
0114 Beldar Day 0.50 135.25 67.62
TOTAL 870.28
TOTAL 878.98
Say 1010.85
17.14 Extra for using coloured W.C. pan instead of white W.C. pan
17.14.1 Orissa pattern W.C. pan 580x440 mm
MATERIALS
7104 Coloured Orissa patern W.C. pan each 1.00 1043.00 1043.00
1954 White Orissa patern W.C. pan 580x440 mm each 1.00 700.00 -700.00
Difference of cost 343.00
TOTAL 346.43
Say 398.40
845
17.15 Providing and fixing white vitreous china pedestal type (European type/ wash down
type) water closet pan.
MATERIALS
LABOUR
0114 Beldar Day 0.50 135.25 67.62
TOTAL 724.28
TOTAL 731.52
Say 841.25
17.16 Extra for using coloured pedestal type W.C pan (European type) with low level cistern
of same colour instead of white vitreous china W.C pan and cistern.
MATERIALS
7105 Coloured (European type) W.C. pan each 1.00 865.00 865.00
1955 White (European type) W.C. pan each 1.00 554.00 -554.00
7106 Coloured low level cistern each 1.00 1 268.00 1268.00
7005 White vitreous china low level flushing cistern each 1.00 824.00 -824.00
10 litre capacity
TOTAL 762.55
Cost for 1 no 876.93
Say 876.95
17.17 Providing and fixing a pair of white vitreous china foot rests of standard pattern
for squatting pan water closet:
17.17.1 250x130x30 mm
Details of cost for one pair
MATERIALS
1363 White vitreous china foot rest of standard pair 1.00 79.00 79.00
pattern for squatting pan W.C.
9999 Cement, sand including carriage of materials L.S. 8.06 1.00 8.06
LABOUR
TOTAL 96.15
TOTAL 97.11
Cost for 1 pair 111.68
Say 111.70
846
17.17 Providing and fixing a pair of white vitreous china foot rests of standard pattern
for squatting pan water closet:
17.17.2 250x125x25 mm
Details of cost for one pair
MATERIALS
1970 White glazed vitreous china foot rest of pair 1.00 80.00 80.00
standard pattern for squatting pan W.C.
9999 Cement, sand including carriage of materials L.S. 8.06 1.00 8.06
LABOUR
0123 Mason lstclass Day 0.06 151.50 9.09
TOTAL 97.15
TOTAL 98.12
Cost for 1 pair 112.84
Say 112.85
17.18 Providing and fixing P.V.C. low level flushing cistern with manually controlled device
(handle lever) conforming to IS : 7231, with all fittings and fixtures complete.
17.18.1 10 litre capacity-White
MATERIALS
7358 Flushing Cistern P.V.C. 10 Its capacity (low each 1.00 570.00 570.00
level) (White) (with fittings, accessories and
flush pipe)
LABOUR
(Considering 1 fitter and 1 beldar can fix 8
cistern in one day)
0114 Beldar Day 0.125 135.25 16.91
TOTAL 611.05
TOTAL 617.16
Cost for 1 cistern 709.73
Say 709.75
17.18 Providing and fixing P.V.C. low level flushing cistern with manually controlled device
(handle lever) conforming to IS : 7231, with all fittings and fixtures complete.
17.18.2 10 litre capacity-coloured
MATERIALS
7123 Controlled flush cistern with accessories each 1.00 632.00 632.00
LABOUR
(Considering 1 fitter and 1 beldar can fix 8
cistern in one day)
0116 Fitter 1 st class Day 0.125 151.50 18.94
0114 Beldar Day 0.125 135.25 16.91
847
TOTAL 674.87
TOTAL 681.62
Cost for 1 cistern 783.86
Say 783.85
17.19 Providing and fixing controlled flush, low level cistern made of vitreous china with
all fittings complete.
17.19.1 10 litre (full flush) capacity-white
MATERIALS
7126 Controlled flush cistern with accessories each 1.00 858.00 858.00
LABOUR
0114 Beldar Day 0.50 135.25 67.62
TOTAL 1,014.89
TOTAL 1,025.04
Cost for 1 cistern 1,178.80
Say 1,178.80
17.19 Providing and fixing controlled flush, low level cistern made of vitreous china with
all fittings complete.
17.19.2 10 litre (full flush) capacity-coloured
MATERIALS
7127 Controlled flush cistern with accessories each 1.00 1277.00 1,277.00
LABOUR
0116 Fitter 1 st class Day 0.50 151.50 75.75
0114 Beldar Day 0.50 135.25 67.62
TOTAL 1,433.89
TOTAL 1,448.23
Cost for 1 cistern 1,665.46
Say 1,665.45
17.20 Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete :
17.20.1 White solid plastic seat with lid
MATERIALS
1875 White solid plastic seat and lid with C.P. brass each 1.00 275.00 275.00
848
TOTAL 288.39
TOTAL 291.27
Say 334.95
17.20 Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete :
17.20.2 Black solid plastic seat with lid
MATERIALS
1876 Black solid plastic seat and lid with C.P. brass each 1.00 250.00 250.00
TOTAL 263.39
TOTAL 266.02
Say 305.90
17.21 Extra for providing coloured other than black solid P.V.C. plastic seat and cover in
European type W.C. pan, instead of white plastic seat and cover.
MATERIALS
7107 Coloured P.V.C. plastic seat and lid each 1.00 380.00 380.00
1875 White P.V.C. plastic seat and lid each 1.00 275.00 -275.00
TOTAL 106.05
Say 121.95
17.22 Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan.

MATERIALS
1614 G.I. Inlet connection each 1.00 50.00 50.00
TOTAL 63.39
TOTAL 64.02
Cost for 1 no 73.62
Say 73.60
849
urinal basin of 430x260x350mm and 340x410x265mm sizes respectively.

MATERIALS
1913 Flat back or wall corner type lipped front each 1.00 380.00 380.00
urinal basin 430x260x350 mm and
340x410x260 mm respectively of white
vitreous china
LABOUR
0114 Beldar Day 0.38 135.25 51.40
TOTAL 498.46
TOTAL 503.44
Say 578.95
17.24 Providing and fixing white vitreous china squatting plate urinal with integral rim
longitudinal flush pipe.
MATERIALS
1915 Squatting plate urinal of white vitreous china each 1.00 610.00 610.00
with integral longitudinal flush pipe
LABOUR
0114 Beldar Day 1.00 135.25 135.25
TOTAL 920.93
TOTAL 930.14
Cost for 1 no. 1,069.66
Say 1,069.65
17.25 Providing and fixing white vitreous china wash basin including making all
connections but excluding the cost of fittings:
17.25.1 Flat back wash basin of size 630x450mm.
MATERIALS
1947 White vitreous china flat back wash basin each 1.00 585.00 585.00
630x450 mm
9999 Fixing charges L.S. 53.82 1.00 53.82
TOTAL 648.31
TOTAL 654.79
850

Say 753.00
connections but excluding the cost of fittings :

MATERIALS
550x400 mm
TOTAL 513.31
TOTAL 518.44
Say 596.20
connections but excluding the cost of fittings:-
17.25.3 Angle back wash basin of size 600x480mm.
MATERIALS
1949 White vitreous china angle flat back wash each 1.00 540.00 540.00
basin 600x480 mm
TOTAL 603.31
TOTAL 609.34
Say 700.75
17.25.4 Angle back wash basin of size 400x400mm.

MATERIALS
1950 White vitreous china angle flat back wash each 1.00 347.00 347.00
basin 400x400 mm
851
TOTAL 410.31
TOTAL 414.41
Say 476.55
Details of cost for one no,
MATERIALS
450x300 mm
TOTAL 423.31
TOTAL 427.54
Sav 491.65
17.25.6 Surgeon type wash basin of size 660x460mm.
MATERIALS
3213 White vitreous china surgeon type back wash each 1.00 810.00 810.00
basin 660x460 mm
TOTAL 873.31
TOTAL 882.04
Cost for 1 no. 1,014.35
Say 1,014.35
17.26 Providing and fixing kitchen sink including making all connections excluding cost
of fittings.
17.26.1 White glazed fire clay sink of size 600x450x250mm.
MATERIALS
1863 White glazed fire clay sink of size each 1.00 1,192.00 1,192.00
600x450x250 mm
TOTAL 1,243.22
852

TOTAL 1,255.65
Cost for 1 no. 1,444.00
Say 1,444.00
17.27 Providing and fixing white vitreous china laboratory sink including making all
connections excluding cost of fittings:
17.27.1 Size 450x300x150 mm.
MATERIALS
1871 Laboratory sink of size 450x300x150 mm each 1.00 664.00 664.00
TOTAL 715.22
TOTAL 722.37
Say 830.75
17.27 Providing and fixing white vitreous china laboratory sink including making all
connections excluding cost of fittings:
17.27.2 Size 600x450x200 mm.

MATERIALS
1872 Laboratory sink of size 600x450x200 mm each 1.00 1,400.00 1,400.00
TOTAL 1,451.22
TOTAL 1,465.73
Cost for 1 no. 1,685.59
Say 1,685.60
17.28 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C.
waste fittings complete.
17.28.1 Semi rigid pipe
17.28.1.1 32mmdia

MATERIALS
7117 Semi rigid P.V.C. waste pipe with waste each 1.00 16.00 16.00
fittings
TOTAL 36.28
853

TOTAL 36.64
Say 42.15
17.28.1 Semi rigid pipe
17.28.1.2 40mmdia
MATERIALS
7118 Semi rigid P.V.C. waste pipe with waste each 1.00 21.00 21.00
fittings
TOTAL 41.28
TOTAL 41.69
Say 47.95
17.28.2 Flexible pipe
17.28.2.1 32mm dia
MATERIALS
7119 Flexible pipe (coil type) with waste fittings each 1.00 20.00 20.00
TOTAL 40.28
TOTAL 40.68
Say 46.80
854
17.28.2 Flexible pipe
17.28.2.2 40mmdia

MATERIALS
7120 Flexible pipe (coil type) with waste fittings each 1.00 22.00 22.00
TOTAL 42.28
TOTAL 42.70
Cost for 1 no 49.10
Say 49.10
17.29 Providing and fixing 100 mm sand cast Iron grating for gully trap.

MATERIALS
1369 100 mm S.C.I. Grating for gully or Nahani trap each 1.00 10.00 10.00
TOTAL 14.16
TOTAL 14.30
Cost for 1 no 16.44
Say 16.45
17.30 Providing and fixing in position 25mm diameter mosquito proof coupling of approved
municipal design.

MATERIALS
municipal design
TOTAL 24.82
TOTAL 25.07
Cost for 1 no 28.83
Say 28.85
17.31 Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved
quality) complete with 6 mm thick hard board ground fixed to wooden cleats with
C.P. brass screws and washers complete.

Details of cost of one no.
MATERIALS
1392 Mirror of superior make glass each 1.00 249.00 249.00
7116 600x450 mm 6 mm thick hard board sqm 0.27 151.00 40.77
(A) Wooden cleats
(Rate same as item no. 9.32 of SH: each 4.00 10.15 40.60
Wood work)
855
0588 25 mm C.P.brass screw, and washers 100 Nos 4.00 83.00 3.32
9999 Sundries L.S. 1.43 1.00 1.43
LABOUR
0112 Carpenter II class Day 0.33 141.60 46.73
0114 Beldar Day 0.33 135.25 44.63
TOTAL 430.64
TOTAL 434.54
Say 493.65
17.32 Providing and fixing mirror of superior glass (of approved quality) and of required
shape and size with plastic moulded frame of approved make and shade with 6 mm
thick hard board backing :
17.32.1 Circular shape 450mm dia.

MATERIALS
7112 Mirror 450 mm dia with plastic moulded each 1.00 370.00 370.00
frame
Hard board 0.45x0.45 = 0.2025 sqm
Add wastage @ 10% = 0.0203 sqm
7116 = 0.2228 sqm say 0.22sqm sqm 0.22 151.00 33.22
7048 Raw plug 40 to 50 mm each 2.00 7.00 14.00
0588 C.P. bras screws and washers 100 Nos 2.00 83.00 1.66
9999 Sundries L.S. 1.43 1.00 1.43
LABOUR
0114 Beldar Day 0.33 135.25 44.63
TOTAL 515.83
TOTAL 520.99
Say 599.15
shape and size with plastic moulded frame of approved make and shade with 6
mm thick hard board backing :
17.32.2 Rectangular shape 453x357mm

MATERIALS
7113 Mirror 453x357 mm dia with plastic moulded each 1.00 245.00 245.00
frame
Hard board 0.453x0.357 = 0.1617 sqm
856
7116 = 0.1779 sqm say 0.18 sqm sqm 0.18 151.00 27.18
0588 C.P. bras screws 25 mm and washers 100 Nos 4.00 83.00 3.32
9999 Sundries L.S. 1.43 1.00 1.43
LABOUR
0114 Beldar Day 0.33 135.25 44.63
TOTAL 400.45
TOTAL 404.45
Say 465.10
17.32.3 Oval shape 450x350mm (outer dimensions)

MATERIALS
7114 Oval shape mirror 450x350 mm (outer each 1.00 280.00 280.00
dimensions)
Hard board 0.45x0.35=0.1575 sqm
7116 = 0.1733 sqm say 0.17 sqm sqm 0.17 151.00 25.67
0588 C.P. bras screws 25 mm and washers 100 Nos 4.00 83.00 3.32
9999 Sundries L.S. 1.43 1.00 1.43
LABOUR
0114 Beldar Day 0.33 135.25 44.63
TOTAL 433.94
TOTAL 438.28
Say 504.00
17.32.4 Rectangular shape 1500x450 mm

MATERIALS
7115 Mirror 1500x450 mm dia with plastic moulded each 1.00 635.00 635.00
frame
Hard board 1.50x0.45 = 0.675 sqm
857
7116 = 0.7425 sqm say 0.74sqm sqm 0.74 151.00 111.74
0588 C.P. bras screws and washers 100 Nos 6.00 83.00 4.98
9999 Sundries L.S. 1.43 1.00 1.43
LABOUR
0114 Beldar Day 0.33 135.25 44.63
TOTAL 890.67
TOTAL 899.58
Cost of one no. 1,034.52
Say 1,034.50
17.33 Providing and fixing 600x120x5mm glass shelf with edges round of supported on
anodised aluminium angle frame with C.P. brass brackets and guard rail complete
fixed with 40 mm long screws, rawl plugs etc., complete.

MATERIALS
3228 600x120x5 mm glass shelf with anodised each 1.00 95.00 95.00
aluminium angle frame C.P. brass brackets &
guard rail of standard size
7048 Raw plugs each 2.00 7.00 14.00
0586 40 mm C.P. brass screws 100 Nos 4.00 150.00 6.00
LABOUR
0114 Beldar Day 0.25 135.25 33.81
TOTAL 188.37
TOTAL 190.25
Say 218.80
17.34 Providing and fixing toilet paper holder :

17.34.1 C.P. brass

MATERIALS
1889 C.P. brass toilet holder of standard size each 1.00 70.00 70.00
(A) Wooden cleats
(Rate same as item no. 9.32 of SH: Wood each 2.00 10.15 20.30 (A)
work)
0588 25 mm C.P.brass screw 100 Nos 2.00 83.00 1.66
LABOUR
0114 Beldar Day 0.12 135.25 16.23
TOTAL 129.47
858
TOTAL 130.56
Say 147.10
17.34 Providing and fixing toilet paper holder:

17.34.2 Vitreous china

MATERIALS
3749 Vitreous china toilet holder of standard size each 1.00 89.00 89.00
(A) Wooden cleats
(Rate same as item no. 9.32 of SH: Wood each 2.00 10.15 20.30
work)
0588 25 mm C.P.brass screw 100 Nos 6.00 83.00 4.98
LABOUR
0114 Beldar Day 0.12 135.25 16.23
TOTAL 151.79
TOTAL 153.10
Say 173.00
17.35 Providing and fixing soil, waste and vent pipes:

17.35.1 100 mm dia.
17.35.1.1 Sand cast iron S&S pipe as per IS: 1729.

Details of cost for 17.37 m
(1.8mx10)-(9x0.07m) = 17.37 m
MATERIALS
1617 100 mm sand cast iron pipe single socket each 10.50 610.00 6 405.00
(1.80 m long)
including 5% allowance for wastage
9999 Scaffolding L.S. 80.73 1.00 80.73
LABOUR
0100 Bandhani Day 0.21 138.45 29.07
0114 Beldar Day 0.83 135.25 112.26
TOTAL 6 744.51
TOTAL 6 811.96
Cost for 17.37 m 7 833.75
Cost per metre 450.99
Say 451.00
859
17.35 Providing and fixing soil, waste and vent pipes :
17.35.1 100 mm dia.
17.35.1.2 Centrifugally cast (spun) iron socketed pipe as per IS: 3989.

(1.75mx10)-(9x0.07m) = 16.87 m
MATERIALS
3620 100 mm centrifugally cast (spun) iron S&S each 10.50 978.00 10,269.00
pipes (1.750 m long)
9999 Scaffolding L.S. 80.73 1.00 80.73
LABOUR
0100 Bandhani Day 0.21 138.45 29.07
0114 Beldar Day 0.83 135.25 112.26
TOTAL 10,608.51
TOTAL 10,714.60
Cost for 16.87 m 12,321.79
Say 730.40

17.35.2 75 mm diameter :
17.35.2.1 Sand cast iron S&S pipe as per IS: 1729.

(1.8mx10)-(9x0.065m)= 17.415 m say 17.42m
MATERIALS
1616 75 mm sand cast iron pipe single socket (1.80 each 10.50 537.00 5,638.50
m long)
9999 Scaffolding L.S. 80.73 1.00 80.73
LABOUR
0100 Bandhani Day 0.17 138.45 23.54
0114 Beldar Day 0.70 135.25 94.68
TOTAL 5,930.85
TOTAL 5,990.16
Cost for 17.42 m 6,888.68
Say 395.45
860
17.35.2 75 mm diameter:
17.35.2.2 Centrifugally cast (spun) iron socketed pipe as per IS: 3989.

(1.75mx10)-(9x0.065m) = 16.915 m say 16.92 m
MATERIALS
3621 75 mm centrifugally cast (spun) iron S&S each 10.50 846.00 8,883.00
pipes (1.750 m long)
9999 Scaffolding L.S. 80.73 1.00 80.73
LABOUR
0100 Bandhani Day 0.17 138.45 23.54
0114 Beldar Day 0.70 135.25 94.68
TOTAL 9,175.35
TOTAL 9,267.10
Cost for 16.92 m 10,657.16
Say 629.85
17.36 Providing and filling the joints with spun yarn cement slurry and cement mortar 1:2
(1 cement: 2 fine sand) in S.C.I./C.I. Pipes:
17.36.1 75mm dia pipe
Details of cost for 4 joints
MATERIALS
9999 Cement mortar, spun yam etc. L.S. 6.89 1.00 6.89
LABOUR
0116 Fitter Day 0.28 151.50 42.42
0114 Beldar Day 0.28 135.25 37.87
TOTAL 87.18
TOTAL 88.05
Cost for 4 joints 101.26
Cost for 1 joint 25.32
Say 25.30
17.36 Providing and filling the joints with spun yarn cement slurry and cement mortar 1:2
( 1 cement: 2 fine sand) in S.C.I./C.I. Pipes:
17.36.2 100 mm dia pipe

MATERIALS
9999 Cement mortar, spun yam etc. L.S. 8.06 1.00 8.06
LABOUR
0116 Fitter Day 0.33 151.50 50.00
0114 Beldar Day 0.33 135.25 44.63
TOTAL 102.69
TOTAL 103.72
Say 29.80
861
17.37 Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/
cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x
10cm of 1:2:4 mix (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal
size) including cost of cutting holes and making good the walls etc. :
17.37.1 For 100 mm dia. Pipe

MATERIALS
1331 M.S. holder bat clamps = 5 nos. each 5.00 13.00 65.00
9999 Carriage of bat clamps L.S. 2.47 1.00 2.47
LABOUR
0116 Fitter Day 0.125 151.50 18.94
0114 Beldar Day 0.50 135.25 67.62
9999 Sundries L.S. 7.15 1.00 7.15
C.C. Block 5x0.10x0x0.10= 0.005 cum
0295 20 mm nominal size stone aggregate cum 0.0033 700.00 2.31
2202 Carriage of stone aggregate below 40 mm cum 0.0044 53.21 0.23
nominal size
0982 Coarse sand cum 0.0022 600.00 1.32
0367 Cement tonne 0.0016 4,500.00 7.20
0114 Beldar Day 0.0045 135.25 0.61
0115 Coolies Day 0.0032 135.25 0.43
0101 Bhishti Day 0.0014 138.45 0.19
0128 Mate Day 0.0002 138.45 0.03
9999 Hire charges of machine etc. L.S. 0.26 1.00 0.26
9999 Sundries L.S. 0.13 1.00 0.13
9999 Sundries L.S. 0.13 1.00 0.13
TOTAL 281.28
TOTAL 284.09
Cost of 5.00 bat clamps 326.70
Cost of 1.00 bat clamp 65.34
Say 65.35
17.37 Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/
cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x
10cm of 1:2:4 mix (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal
size) including cost of cutting holes and making good the walls etc. :
17.37.2 For 75 mm dia. Pipe

MATERIALS
1332 M.S. holder bat clamps = 5 nos. each 5.00 11.00 55.00
9999 Carriage of bat clamps L.S. 2.47 1.00 2.47
LABOUR
862
0116 Fitter Day 0.125 151.50 18.94
0114 Beldar Day 0.50 135.25 67.62
9999 Sundries L.S. 7.15 1.00 7.15
C.C. Block 5x0.10x0.10x0.10= 0.005 cum
2202 Carriage of stone aggregate below 40 mm cum 0.0044 53.21 0.23
nominal size
0982 Coarse sand cum 0.0022 600.00 1.32
0367 Cement tonne 0.0016 4500.00 7.20
0114 Beldar Day 0.0045 135.25 0.61
0115 Coolies Day 0.0032 135.25 0.43
0101 Bhishti Day 0.0014 138.45 0.19
0128 Mate Day 0.0002 138.45 0.03
9999 Hire charges of machine etc. L.S. 0.26 1.00 0.26
9999 Sundries L.S. 0.13 1.00 0.13
9999 Sundries L.S. 0.13 1.00 0.13
TOTAL 271.28
TOTAL 273.99
Cost of 5.00 bat clamps 315.09
Cost of 1.00 bat clamp 63.02
Say 63.00
17.38 Providing and fixing bend of required degree with access door, insertion rubber
washer 3 mm thick, bolts and nuts complete.
17.38.1 100 mm
17.38.1.1 Sand cast iron S&S as per IS - 1729

MATERIALS
1625 100 mm dia sand cast iron bend with access each 1.00 194.00 194.00
door including cost of bolts and nuts
1374 Insertion rubber washer 3 mm thick each 1.00 12.00 12.00
TOTAL 219.52
TOTAL 221.72
Say 255.00
863
17.38.1 100 mm

MATERIALS
3624 100 mm dia sand cast iron S & each 1.00 225.00 225.00
S bend with access door including cost of
bolts and nuts
TOTAL 250.52
TOTAL 253.03
Say 291.00
17.38.2 75 mm dia

MATERIALS
1624 75 mm sand cast iron bend with access door each 1.00 161.00 161.00
including cost of bolts and nuts
TOTAL 180.79
TOTAL 182.60
Say 210.00
17.38.2 75 mm dia
17.38.2.2 Sand cast iron S&S as per IS- 3989

MATERIALS
3625 75 mm dia send cast iron S&S each 1.00 179.00 179.00
bend with access door including cost of bolts
and nuts
TOTAL 198.79
TOTAL 200.78
Say 230.90
864
17.39 Providing and fixing plain bend of required degree.
17.39.1 100 mm

MATERIALS
1621 100 mm sand cast iron plain bend each 1.00 178.00 178.00
TOTAL 191.52
TOTAL 193.44
Say 222.45

17.39.1 100 mm
17.39.1.2 Sand cast iron S&S as per IS : 3989

MATERIALS
3628 100 mm dia sand cast iron S & each 1.00 190.00 190.00
S plain bend
TOTAL 203.52
TOTAL 205.56
Say 236.40

17.39.2 75 mm
17.39.2.1 Sand cast iron S&S as per IS -1729

MATERIALS
1620 75 mm sand cast iron plain bend each 1.00 140.00 140.00
TOTAL 150.79
TOTAL 152.30
Say 175.15
865
17.39.2 75 mm

MATERIALS
3629 75 mm dia sand cast iron S&S each 1.00 143.00 143.00
plain bend
TOTAL 153.79
TOTAL 155.33
Say 178.65
17.40 Providing and fixing heel rest sanitary bend

17.40.1 100 mm dia

MATERIALS
1667 100 mm sand cast iron heel rest bend each 1.00 197.00 197.00
TOTAL 210.52
TOTAL 212.63
Say 244.50

17.40.1 100 mm dia
17.40.1.2Sand cast iron S&S as per IS - 3989

MATERIALS
3634 100 mm dia sand cast iron S & S each 1.00 233.00 233.00
heel rest sanitary bend
TOTAL 246.52
TOTAL 248.99
Say 286.35
866
17.40.2 75 mm

MATERIALS
1666 75 mm sand cast iron heel rest bend each 1.00 165.00 165.00
TOTAL 175.79
TOTAL 177.55
Say 204.20

17.40.2 75 mm

MATERIALS
3635 75 mm dia send cast iron S&S each 1.00 204.00 204.00
heel rest sanitary bend
TOTAL 214.79
TOTAL 216.94
Say 249.50
17.41 Providing and fixing double equal junction of required degree with access door,
insertion rubber washer 3 mm thick, bolts and nuts complete :
17.41.1 100x100x100x100mm

MATERIALS
1637 100x100x100x100 mm sand cast iron double each 1.00 417.00 417.00
equal junction with access door including cost
of bolts and nuts
TOTAL 442.39
TOTAL 446.81
Cost for 1 junction 513.83
Say 513.85
867
17.41.1 100x100x100x100mm

MATERIALS
3654 100x 100x 100x 100 mm sand each 1.00 502.00 502.00
cast iron S&S double equal junction
with access door including cost of bolts and
nuts
TOTAL 527.39
TOTAL 532.66
Say 612.55
17.41.2 75x75x75x75 mm
MATERIALS
1636 75x75x75x75 mm sand cast iron double equal each 1.00 333.00 333.00
junction with access door including cost of
bolts and nuts
TOTAL 352.79
TOTAL 356.32
Say 409.75
17.41.2 75x75x75x75 mm

MATERIALS
3655 75x75x75x75 mm sand cast each 1.00 400.00 400.00
iron S&S double equal junction with access
TOTAL 419.79
TOTAL 423.99
Say 487.60
868
17.42 Providing and fixing double equal plain junction of required degree.
17.42.1 100x100x100x100 mm

MATERIALS
1634 100x100x100x100 mm sand cast iron double each 1.00 394.00 394.00
equal plain junction
TOTAL 407.52
TOTAL 411.60
Say 473.35
17.42.1 100x100x100x100 mm

MATERIALS
3650 100x100x100x100 mm. sand each 1.00 467.00 467.00
cast iron S&S double equal plain junction
TOTAL 480.52
TOTAL 485.33
Say 558.15
17.42.2 75x75x75x75 mm

MATERIALS
1633 75x75x75x75 mm sand cast iron double equal each 1.00 296.00 296.00
plain junction
TOTAL 306.79
TOTAL 309.86
Say 356.35
869
17.42.2 75x75x75x75 mm

MATERIALS
iron S&S double equal plain junction
TOTAL 383.79
TOTAL 387.63
Say 445.75
17.43 Providing and fixing single equal plain junction of required degree with access
door, insertion rubber washer 3 mm thick, bolts and nuts complete.
17.43.1 100x100x100 mm

MATERIALS
1631 100x100x100 mm single equal plain junction each 1.00 297.00 297.00
nuts
TOTAL 322.52
TOTAL 325.75
Say 374.60
17.43.1 100x100x100 mm

MATERIALS
3644 100x100x100 mm sand cast each 1.00 396.00 396.00
iron S&S single equal plain junction with
access door including cost of bolts and nuts
TOTAL 421.52
TOTAL 425.74
Say 489.60
870
17.43.2 75x75x75 mm

MATERIALS
1630 75x75x75 mm single equal plain junction with each 1.00 224.00 224.00
TOTAL 243.79
TOTAL 246.23
Say 283.15
17.43.2 75x75x75 mm

MATERIALS
3645 75x75x75 mm sand cast iron S each 1.00 294.00 294.00
& S single equal plain junction with access
TOTAL 313.79
TOTAL 316.93
Say 364.45
17.44 Providing and fixing single equal plain junction of required degree
17.44.1 100x100x100 mm

MATERIALS
1628 100x100x100 mm sand cast iron single equal each 1.00 265.00 265.00
plain junction
TOTAL 278.52
TOTAL 281.31
Say 323.50
871
17.44.1 100x100x100 mm

MATERIALS
3640 100 x 100 x 100 mm sand cast each 1.00 367.00 367.00
iron S&S single equal plain junction
TOTAL 380.52
TOTAL 384.33
Say 442.00
17.44.2 75x75x75 mm

MATERIALS
1627 75x75x75 mm sand cast iron single equal each 1.00 205.00 205.00
plain junction
TOTAL 215.79
TOTAL 217.95
Say 250.65
17.44 Providing and fixing single equal plain junction of required degree:
17.44.2 75x75x75 mm

MATERIALS
3641 75x75x75 mm sand cast iron each 1.00 276.00 276.00
S&S single equal plain junction
TOTAL 286.79
TOTAL 289.66
Say 333.10
872
17.45 Providing and fixing double unequal junction of required degree with access
door, insertion rubber washer 3 mm thick, bolts and nuts complete :
17.45.1 100x100x75x75 mm

MATERIALS
1662 100x100x75x75 mm sand cast iron branch each 1.00 453.00 453.00
nuts
TOTAL 478.52
TOTAL 483.31
Say 555.80
17.45 Providing and fixing double unequal junction of required degree with access
door, insertion rubber washer 3 mm thick, bolts and nuts complete :
17.45.1 100x100x75x75 mm

MATERIALS
iron S&S double unequal junction with
TOTAL 725.52
TOTAL 732.78
Say 842.70
17.46 Providing and fixing double unequal plain junction of required degree:
17.46.1 100x100x75x75 mm

MATERIALS
1659 100X100X75X75 mm junction each 1.00 423.00 423.00
TOTAL 436.52
TOTAL 440.89
Say 507.00
873
17.46 Providing and fixing double unequal plain junction of required degree:
17.46.1 100x100x75x75 mm

MATERIALS
iron S&S double unequal plain junction
TOTAL 652.52
TOTAL 659.05
Say 757.90
17.47 Providing and fixing single unequal junction of required degree with access door,
17.47.1 100x100x75 mm

MATERIALS
1656 100x100x75 mm S.C.I, single unequal each 1.00 321.00 321.00
junction with access door including cost of
bolts and nuts
TOTAL 346.52
TOTAL 349.99
Say 402.50
17.47 Providing and fixing single unequal junction of required degree with access door,
17.47.1 100x100x75 mm

MATERIALS
S&S single unequal junction with access
TOTAL 548.52
TOTAL 554.01
Say 637.10
874
17.48 Providing and fixing single unequal plain junction of required degree :
17.48.1 100x100x75 mm

MATERIALS
1653 100X100X75 mm junction each 1.00 288.00 288.00
TOTAL 301.52
TOTAL 304.54
Say 350.20
17.48 Providing and fixing single unequal plain junction of required degree
17.48.1 100x100x75 mm

MATERIALS
S&S single unequal plain junction
TOTAL 474.52
TOTAL 479.27
Say 551.15
17.49 Providing and fixing double equal plain invert branch of required degree:
17.49.1 100x100x100x100mm

MATERIALS
1673 100X100X100x100 mm sand cast iron invert each 1.00 422.00 422.00
branch
TOTAL 435.52
TOTAL 439.88
Cost for 1 invert branch 505.86
Say 505.85
875
17.49.1 100x100x100x100mm
17.49.1.2 Sand cast iron S&S as per IS 3989

MATERIALS
3685 100x 100x 100 x 100 mm send each 1.00 414.00 414.00
cast iron S&S double equal plain
invert branch
TOTAL 427.52
TOTAL 431.80
Cost of 1 invert branch 496.57
Say 496.55
17.49.2 75x75x75x75 mm

MATERIALS
branch
TOTAL 324.79
TOTAL 328.04
Cost for one invert branch 377.25
Say 377.25
17.49.2 75x75x75x75 mm

MATERIALS
3686 75x75x75x75 mm centrifugally cast(spun) each 1.00 334.00 334.00
iron S&S double equal plain invert branch
TOTAL 344.79
TOTAL 348.24
Cost of one invert branch 400.48
Say 400.50
876
17.50 Providing and fixing single equal plain invert branch of required degree:
17.50.1 100x100x100 mm
17.50.1.1 Sand cast iron S&S as per iron 1729

MATERIALS
1670 100X100X100 mm sand cast iron invert each 1.00 321.00 321.00
branch
TOTAL 334.52
TOTAL 337.87
Say 388.55
17.50.1 100x100x100 mm

MATERIALS
3681 100x100x100 mm sand cast each 1.00 325.00 325.00
iron S&S single equal plain invert branch
TOTAL 338.52
TOTAL 341.91
Say 393.20
17.50.2 75x75x75 mm

MATERIALS
1669 75X75X75 mm sand cast-iron invert branch each 1.00 239.00 239.00
TOTAL 249.79
TOTAL 252.29
Say 290.15
877
17.50.2 75x75x75 mm

MATERIALS
3682 75x75x75 mm sand cast iron S each 1.00 247.00 247.00
& S single equal plain invert branch
TOTAL 257.79
TOTAL 260.37
Say 299.45
17.51 Providing and fixing double unequal invert branch of required degree
17.51.1 100x100x75x75 mm

MATERIALS
branch
TOTAL 471.52
TOTAL 476.24
Say 547.70
878
17.51 : Providing and fixing double unequal invert branch of required degree
17.51.1: 100x100x75x75 mm
17.51.1.2 :Sand cast iron S&S as per IS - 3989
MATERIALS
iron S&S double unequal plain invert branch
TOTAL 587.52
TOTAL 593.40
Say 682.40
17.52 : Providing and fixing single unequal plain invert branch of required degree :
17.52.1: 100x100x75 mm
17.52.1.1: Sand cast iron S&S as per IS - 1729
MATERIALS
1674 100X100X75 mm sand cast iron invert branch each 1.00 382.00 382.00
TOTAL 395.52
TOTAL 399.48
Say 459.40
17.52 : Providing and fixing single unequal plain invert branch of required degree :
17.52.1: 100x100x75 mm
17.52.1.2 : Sand cast iron S&S as per IS - 3989
MATERIALS
S&S single unequal plain invert branch
TOTAL 435.52
TOTAL 439.88
Say 505.85
879
17.53 : Providing and fixing sand cast iron S&S offsets as per IS: 1729
17.53.1: 76 mm offsets
17.53.1.1: With 75 mm dia. pipe
MATERIALS
3746 76 mm sand cast iron S&S offset with 75 mm each 1.00 126.00 126.00
dia pipe
TOTAL 136.79
TOTAL 138.16
Cost of 1 no 158.88
Say 158.90
17.53.1: 76 mm offsets
MATERIALS
dia pipe
TOTAL 230.79
TOTAL 233.10
Cost of 1 no 268.07
Say 268.05
17.53.2 : 114 mm offsets
MATERIALS
dia pipe
TOTAL 233.52
TOTAL 235.86
Cost of 1 no 271.24
Say 271.25
880
17.53.2 : 114 mm offsets
17.53.2.2 : With 100 mm dia. Pipe

MATERIALS
3713 114 mm sand cast iron S&S offset with 100 each 1.00 289.00 289.00
mm dia pipe
TOTAL 302.52
TOTAL 305.55
Say 351.40
17.53.3 : 152 mm offsets
17.53.3.1: With 75 mm dia. Pipe
MATERIALS
dia pipe
TOTAL 292.94
TOTAL 295.87
Say 340.25
17.53.3 : 152 mm offsets
17.53.3.2 : With 100 mm dia. pipe
MATERIALS
3717 152 mm sand cast iron S&S offset with 100 each 1.00 361.00 361.00
mm dia pipe
TOTAL 378.94
TOTAL 382.73
Say 440.15
881
17.54 : Providing and fixing sand cast iron S&S offsets as per IS: 3989.
17.54.1 : 75 mm offsets
MATERIALS
3699 75 mm sand cast iron S&S each 1.00 179.00 179.00
offset with 75 mm dia pipe
TOTAL 189.79
TOTAL 191.69
Say 220.45
17.54 Providing and fixing sand cast iron S&S offsets as per IS: 3989.
17.54.2 150 mm offsets
17.54.2.1 With 75 mm dia. pipe
MATERIALS
3707 150 mm sandcast iron S&S each 1.00 223.00 223.00
TOTAL 239.12
TOTAL 241.51
Say 277.75
17.54 Providing and fixing sand cast iron S&S offsets as per IS: 3989.
17.54.2 150 mm offsets
17.54.2.2 With 100 mm dia. pipe
MATERIALS
3,708 150 mm sand cast iron S&S each 1.00 306.00 306.00
9,999 Carriage of materials and fixing charges L.S. 16.12 1.00 16.12
TOTAL 322.12
TOTAL 325.34
Say 374.15
17.55 Providing and fixing door piece, insertion rubber washer 3mm thick, bolts & nuts
complete :
17.55.1 100mm
MATERIALS
1683 100 mm sand cast iron door piece including each 1.00 291.00 291.00
cost of bolts and nuts
882

1374 Insertion rubber washer each 1.00 12.00 12.00
TOTAL 316.52
TOTAL 319.69
Say 367.65
17.55 Providing and fixing door piece, insertion rubber washer 3mm thick, bolts &
nuts complete :
17.55.1 100 mm

MATERIALS
door piece including cost of bolts and nuts
TOTAL 255.52
TOTAL 258.08
Say 296.80
nuts complete :
17.55.2 75 mm
MATERIALS
1682 75 mm sand cast iron door piece including each 1.00 211.00 211.00
cost of bolts and nuts
TOTAL 230.79
TOTAL 233.10
Say 268.05
nuts complete :
17.55.2 75 mm
MATERIALS
883

door piece including cost of bolts and nuts
TOTAL 195.79
TOTAL 197.75
Say 227.40
17.56 Providing and fixing terminal guard:

17.56.1 100 mm
MATERIALS
1640 100 mm sand cast iron terminal guard each 1.00 152.00 152.00
TOTAL 165.52
TOTAL 167.18
Say 192.25

17.56.1 100 mm
MATERIALS
3733 100 sand cast iron S&S each 1.00 154.00 154.00
terminal guard
TOTAL 167.52
TOTAL 169.20
Say 194.60

17.56.2 75 mm
MATERIALS
1639 75 mm sand cast iron tepminal guard each 1.00 109.00 109.00
TOTAL 119.79
884

TOTAL 120.99
Say 139.15

17.56.2 75 mm
MATERIALS
terminal guard
TOTAL 152.79
TOTAL 154.32
Say 177.45
17.57 Providing and fixing collar:

17.57.1 100 mm
MATERIALS
1686 100 mm sand cast iron collar each 1.00 110.00 110.00
TOTAL 123.52
TOTAL 124.76
Say 143.45

17.57.1 100 mm
MATERIALS.
3738 100 sand cast iron S&S collar each 1.00 161.00 161.00
TOTAL 174.52
TOTAL 176.27
Say 202.70
885
17.57.2 75 mm
MATERIALS
1685 75 mm sand cast iron collar each 1.00 82.00 82.00
TOTAL 92.79
TOTAL 93.72
Say 107.80

17.57.2 75 mm
17.57.2.2 Sand cast iron S&S as per IS- 3989
MATERIALS
collar
TOTAL 125.79
TOTAL 127.05
Say 146.10
17.58 Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron
pipes and fittings of diameter:
17.58.1 100mm
Details of cost for one joint
MATERIALS
1397 Pig lead kilogram 0.98 58.00 56.84
1881 Spun yarn kilogram 0.11 30.00 3.30
9999 Kerosene oil, fuel and other sundries L.S. 13.52 1.00 13.52
LABOUR
0116 Fitter Day 0.06 151.50 9.09
0117 Asstt. Fitter Day 0.06 141.60 8.50
0114 Beldar Day 0.12 135.25 16.23
TOTAL 108.91
TOTAL 110.00
Cost of one joint 126.50
Say 126.50
886
17.58.2 75 mm
MATERIALS
LABOUR
0116 Fitter Day 0.05 151.50 7.58
0117 Asstt. Fitter Day 0.05 141.60 7.08
0114 Beldar Day 0.09 135.25 12.17
TOTAL 92.79
TOTAL 93.72
Say 107.80
17.58.3 50 mm
MATERIALS
LABOUR
0116 Fitter Day 0.04 151.50 6.06
0117 Asstt. Fitter Day 0.05 141.60 7.08
0114 Beldar Day 0.05 135.25 6.76
TOTAL 74.55
TOTAL 75.30
Say 86.60
17.59 Providing and fixing M.S. stays and clamps for sand cast iron/centrifugally cast
(spun) iron pipes of diameter :
17.59.1 100 mm
MATERIALS
1330 M.S. stayes & clamps including bolts and each 1.00 28.00 28.00
nuts for 100 mm pipe
TOTAL 41.52
TOTAL 41.94
Say 48.25
887
17.59 Providing and fixing M.S. stays and clamps for sand castiron/centrifugally cast
17.59.2 75 mm
MATERIALS
nuts for 75 mm pipe
TOTAL 35.79
TOTAL 36.15
Say 41.55
17.59 Providing and fixing M.S. stays and clamps for sand cast iron/centrifugally cast
17.59.3 50 mm
MATERIALS
nuts for 50 mm pipe
TOTAL 29.49
TOTAL 29.78
Say 34.25
17.60 Providing and fixing trap of self cleansing design with screwed down or hinged
grating with or without vent arm complete, including cost of cutting and making
good the walls and floors:
17.60.1 100 mm inlet and 100 mm outlet
17.60.1.1 Sand cast iron S&S as per IS: 3989.
MATERIALS
7808 Sand cast iron S&S 100 mm each 1.00 309.00 309.00
inlet and 100 mm outlet
LABOUR
0114 Beldar Day 0.50 135.25 67.62
TOTAL 468.62
TOTAL 473.31
Say 544.30
888
17.60.1.2 Sand Cast Iron S&S as per IS: 1729.
MATERIALS
1897 Sand cast iron trap with 100 mm inlet and 100 each 1.00 221.00 221.00
mm outlet
LABOUR
0114 Beldar Day 0.50 135.25 67.62
TOTAL 380.62
TOTAL 384.43
Say 442.10
MATERIALS
7809 Sand cast iron S&S 100 mm each 1.00 334.00 334.00
inlet and 75 mm outlet
LABOUR
0114 Beldar Day 0.50 135.25 67.62
TOTAL 493.62
TOTAL 498.56
Say 573.35
good the walls and floors :
17.60.2.2 Sand Cast Iron S&S as per IS- 1729.
MATERIALS
889

1898 Sand cast iron trap with 100 mm inlet and 75 each 1.00 164.00 164.00
mm outlet
LABOUR
0114 Beldar Day 0.50 135.25 67.62
TOTAL 323.62
TOTAL 326.86
Say 375.90
17.61 Cutting chases in brick masonry walls for following diameter sand cast iron/
centrifugally cast (spun) iron pipes and making good the same with cement
concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm
nominal size ) including necessary plaster and pointing in cement mortar 1:4(1
cement: 4 coarse sand):
17.61.1 100mmdia.
Details of cost for one metre
MATERIALS
Cement concrete 1:3:6 (1 cement :3 coarse
sand :6 graded stone aggregate )
(Rate as per item no. 4.2.5) cum 0.022 3112.70 68.48 (A)
9999 Plastering in cement mortar 1:4 L.S. 10.40 1.00 10.40
LABOUR
0114 Beldar Day 0.27 135.25 36.52
TOTAL 140.77
TOTAL 141.49
Cost of one metre 152.44
Say 152.45
centrifugally cast (spun) iron pipes and making good the same with cement
nominal size ) including necessary plaster and pointing in cement mortar 1:4(1
cement: 4 coarse sand):
17.61.2 75mmdia.
MATERIALS
(Rate as per item no. 4.2.5) cum 0.015 3112.70 46.69 (A)
890

LABOUR
0114 Beldar Day 0.20 135.25 27.05
TOTAL 100.20
TOTAL 100.74
Say 108.85
centrifiigally cast (spun) iron pipes and making good the same with cement
nominal size ) including necessary plaster and pointing in cement mortar 1:4
(1 cement: 4 coarse sand):
17.61.3 50mmdia.
MATERIALS
(Rate as per item no. 4.2.5) cum 0.008 3 112.70 24.90 (A)
LABOUR
0114 Beldar Day 0.14 135.25 18.94
TOTAL 62.37
TOTAL 62.74
Say 68.40
17.62 Painting C.I. cistern with bitumastic or any other anti-corrosive paint inside and
white paint over a coat of zinc chromate yellow primer (of approved quality ) on
the outside surface of the cistern flush pipe, other fittings, etc. complete for new
work.
Details of cost for one cistern with fittings

MATERIALS
0828 Anticorrosive bitumastic paint ( of approved litre 0.23 52.00 11.96
quality)
9999 Sundries (brush sand paper etc.) L.S. 6.76 1.00 6.76
LABOUR
0123 Painter Day 0.25 151.50 37.88
891

0114 Beldar Day 0.50 135.25 67.62
TOTAL 185.25
TOTAL 187.10
Say 215.15
17.63 Re-painting C.I. cistern with bitumastic or any other anti-corrosive paint inside
and white paint on the outside surface of the cistern, flush pipe, other fittings,
etc. complete including polishing of wooden seat and lid and cleaning of W.C.
pan with acid wherever necessary.
MATERIALS
0828 Anticorrosive bitumastic paint ( of approved litre 0.23 52.00 11.96
quality)
9999 Polishing of wooden seat and cleaning of L.S. 20.67 1.00 20.67
W.C. pan with acid
9999 Sundries and carriage of materials L.S. 7.15 1.00 7.15
LABOUR
0123 Painter Day 0.20 151.50 30.30
0114 Beldar Day 0.25 135.25 33.81
TOTAL 127.89
TOTAL 129.17
Say 148.55
17.64 Repainting C.I. cistern with synthetic enamel paint of approved colour brand
and manufacture on the outside surface of cistern flush pipe, other fittings etc.
complete.
MATERIALS
9999 Sundries and carriage of materials L.S. 3.64 1.00 3.64
LABOUR
0131 Painter Day 0.09 141.60 12.74
0114 Beldar Day 0.12 135.25 16.23
TOTAL 56.61
TOTAL 57.18
Say 65.75
892
17.65 Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and
fittings with paint of any colour such as chocolate grey, or buff etc. over a coat
of primer (of approved quality) for new work :
17.65.1 100 mm diameter pipe
MATERIALS
Perimeter = 3.14x 110 mm =345.71
Area 10x0.3457 = 3.46 sqm
Priming coat
(Rate as per item no. 13.50.3 of S.H. sqm 3.46 12.65 43.77 (A)
finishing)
Painting two coats with paint of any colour
such as chocalate, grey or buff etc.
(Rate as per item no 13.61 of S.H. finishing sqm 3.46 35.35 122.31(A)
9999 Add for delay L.S. 17.16 1.00 17.16
TOTAL 183.24
TOTAL 183.41
Cost of 10 metres 186.01
Cost of 1 metre 18.60
Say 18.60
17.65 Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and
fittings with paint of any colour such as chocolate grey, or buff etc. over a coat
of primer (of approved quality) for new work :
MATERIALS
Perimeter = 3.14x82 mm =257.71
Area 10x0.2577 =2.577 sqm say 2.60 sq. m
for outer surface
Priming coat
(Rate as per item no. 13.50.3 of S.H. sqm 2.60 12.65 32.89(A)
finishing)
Painting two coats with paint of any colour
such as chocalate, grey or buff etc.
(Rate as per item no 13.61.1 of S.H. finishing sqm 2.60 35.35 91.91(A)
9999 Add for delay L.S. 15.21 1.00 15.21
TOTAL 140.01
TOTAL 140.16
Say 14.25
893
17.66 Repainting sand cast iron/ centrifugally cast iron (spun) iron, soil, waste, vent
pipes and fittings with paint of any colour such as chocolate, grey or buff etc :
Painting one coat with paint of any colour
such as chocolate,grey or buff etc.
(Rate as per item no 14.54.1) sqm 3.46 22.85 79.06 (A)
9999 Add for delay L.S. 12.22 1.00 12.22
TOTAL 91.28
TOTAL 91.40
Say 9.30
17.66 Repainting sand cast iron/ centrifugally cast iron (spun) iron, soil, waste, vent
pipes and fittings with paint of any colour such as chocolate, grey or buff etc :
Painting one coat with paint of any colour
such as chocolate,grey or buff etc.
(Rate as per item no 14.54.1) sqm 2.577 22.85 58.88 (A)
9999 Add for delay L.S. 9.49 1.00 9.49
TOTAL 68.37
TOTAL 68.37
Say 7.00
17.67 Repainting bath tub of size 1700x730x430mm with enamel paint.

Details of cost for one tub
MATERIALS
0830 Paint of approved quality litre 0.90 115.00 103.50
9999 Sundries L.S. 6.76 1.00 6.76
LABOUR
0131 Painter Day 0.25 141.60 35.40
0115 Coolies Day 0.25 135.25 33.81
TOTAL 179.47
TOTAL 181.26
Say 208.45
894
17.68 Providing and fixing vitreous china dual purpose closet suitable for use as
squatting pan or European type water closet (Anglo Indian W.C pan) with seat
lid with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern
with fitting and brackets, 40mm flush bend 20mm over flow pipe with specials of
standard make and mosquito proof coupling of approved municipal design
complete, including painting of fittings and brackets, cutting and making good
the walls and floors wherever required :
17.68.1 White vitreous china dual purpose WC pan with white solid plastic seat and lid
with white vitreous china flushing cistern and C.P. flush bend.
MATERIALS
1875 White plastic seat and lid with C.P. brass each 1.00 275.00 275.00
hinges and rubber bufers etc.
1965 White vitreous china dual prupose closet each 1.00 796.00 796.00
(anglo India W.C. pan )
7006 10 litre white vitreous china low level flushing each 1.00 390.00 1,390.00
cistern with fittings and brackets and 40 mm
porcelain enamelled flush bend
9999 20 mm G.I. over flow pipe and specials for L.S. 276.25 1.00 276.25
over flow pipe
1350 Mosquito proof coupling of approved each 1.00 23.00 23.00
municipal design
9999 Plugs, screws etc. L.S. 59.15 1.00 59.15
9999 Red lead, white lead and gaskin etc. L.S. 71.76 1.00 71.76
9999 Cement,sand and grit L.S. 118.43 1.00 118.43
LABOUR
0116 Fitter Day 1.00 151.50 151.50
0114 Beldar Day 1.00 135.25 135.25
TOTAL 3,566.27
TOTAL 3,601.93
Cost of 1 no. 4,142.22
Say 4,142.20
17.69 Providing and fixing PTMT Waste Coupling for washbasin and sink, of approved
quality and colour.
17.69.1 Waste coupling 3.1 mm of 79mm length and 62mm breadth weighing not less
than 45gms.
Materials :
7491 P.T.M.T. waste coupling 31/32 mm Each 1.00 45.00 45.00
TOTAL 65.28
TOTAL 65.93
Say 75.80
895
17.69 Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved
quality and colour.
17.69.2 Waste coupling 38mm of 83mm length and 77mm breadth, weighing not less
than 60gms.
Materials :
7492 P.T.M.T. waste coupling 38/40 mm Each 1.00 66.00 66.00
TOTAL 86.28
TOTAL 87.14
Say 100.20
17.70 Providing and fixing PTMT Bottle Trap for Wash basin and sink.
17.70.1 Bottle trap 31mm single piece moulded with height of 270mm, effective length of
tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm
minimum water seal, weighing not less than 260gms.

Materials:
7493 P.T.M.T. bottle trap 31/32 mm Each 1.00 295.00 295.00
TOTAL 315.28
TOTAL 318.43
Say 366.20
17.70 Providing and fixing PTMT Bottle Trap for Wash basin and sink.
17.70.2 Bottle trap 38mm single piece moulded with height of 270mm, effective length of
tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm
minimum water seal, weighing not less than 263gms.
Materials :
7494 P.T.M.T. bottle trap 38/40 mm Each 1.00 320.00 320.00
TOTAL 340.28
TOTAL 343.68
Say 395.25
896
17.71 Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and
112mm distance from wall of standard shape with bracket of the same materials
with snap fittings of approved quality and colours weighing not less
than 105 gms
Materials :
7503 P.T.M.T. liquid shop container Each 1.00 135.00 135.00
TOTAL 141.76
TOTAL 143.18
Say 164.65
17.72 Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm
wide with a minimum distances of 37mm from wall face with concealed fittings
arrangement of approved quality and colours weighing not less than 80 gms
Materials :
7504 P.T.M.T. towel ring Each 1.00 108.00 108.00
TOTAL 128.28
TOTAL 129.56
Cost of one no 148.99
Say 149.00
17.73 Providing and fixing PTMT towel rail complete with brackets fixed to wooden
cleats with CP brass screws with concealed fitting arrangement of approved
quality and colour.
17.73.1 450mm long towel rail with total length of 495mm, 78mm wide and effective height
of 88mm, weighing not less than 170gms.

Materials :
7505 P.T.M.T. towel rail 18" (450mm) Each 1.00 180.00 180.00
Wooden cleates
(Rate as per item no 9.32 of SH : Wood work) each 2.00 10.15 20.30(A)
0588 25 mm CP. brass screws 100 Nos 6.00 83.00 4.98
LABOUR
0114 Beldar Day 0.17 135.25 22.99
TOTAL 256.50
TOTAL 258.86
Say 294.65
897
17.73 Providing and fixing PTMT towel rail complete with brackets fixed to wooden
cleats with CP brass screws with concealed fitting arrangement of approved
quality and colour.
17.73.2 600mm long towel rail with total length of 645mm, width 78mm and effective
height of 88mm, weighing not less than 190gms.
Materials :
7506 P.T.M.T. towel rail 24" (600mm) Each 1.00 210.00 210.00
Wooden cleats
LABOUR
0114 Beldar Day 0.17 135.25 22.99
TOTAL 286.50
TOTAL 289.16
Say 329.50
17.74 Providing and fixing PTMT shelf 440 mm long, 124 mm widthand 36 mm height
of approved quality and colour, weighing not less than 300gms.
Materials :
7507 P.T.M.T. shelf Each 1.00 245.00 245.00
Wooden cleates
LABOUR
0114 Beldar Day 0.17 135.25 22.99
TOTAL 321.50
TOTAL 324.51
Say 370.15
17.75 Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2"
BSP thread and shapes, weighing not less than 60gms.
Materials :
7508 P.T.M.T. Urinal spreader 15 mm Each 1.00 120.00 120.00
TOTAL 126.76
TOTAL 128.03
Say 147.25
898
17.76 Providing and fixing PTMT urinal cock of approved quality and colour.
17.76.1 15 mm nominal bore, 80mm long. 42 mm high and 30mm wide with BSP female
threads weighing not less than 48gms
Details of cost for 1 No.
Materials:
7858 P.T.M.T. Urinal cock 15mm dia each 1.00 90.00 90.00
TOTAL 98.06
Add for water charges @ 1 % 0.98
TOTAL 99.04
Add 15% for contractor’s profit and over head @ 14.86
Cost for 1 No. 113.90
Say 113.90
17.77 Providing and fixing M.S. holder bat clamp of approved design to sand cast
iron/ cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5mm
flat of specified shape, projecting 75mm outside the wall surface and fixed on
wall with 4nos, 6mm dia expansion hold fasteners including drilling necessary
holes in brick wall/ CC/ RCC surface and the cost of bolts etc. The pipes shall be
fixed to the already fixed brackets with the help of 30mm x1.6mm galvanised
M.S. flats of specified shape and of total length 420mm and shall be fixed with
M.S. nuts, bolts, & washers of size 25x6mm, one bolts on each side of the pipe.
17.77.1 Total bracket length 580mm of approved shape and design (for single 100mm
dia pipe).
MATERIALS
M.S. flats 50x5mm 50x0.58= 2.90m
@ 1.97 kg/metre = 5.71 kg.
M.S. flats 30x1.6mm 5x0.42 = 2.10m.
0.38kg/metre = 0.80kg.
Total = 6.51kg.
Add wastage 5% = 0.33kg.
Total = 6.86 kg.
1007 M.S.flats 6.86kg. = 0.0686 quintal quintal 0.0686 3100.00 212.66
2205 Carriage of Steel tonne 0.00686 47.29 0.32
0116 Fitter (grade 1) Day 0.033 151.50 5.00
0114 Beldar Day 0.065 135.25 8.79
Priming coat
5x0.58x0.11 =0.32
5x0.42x0.063 =0.13
0.45sqm sqm 0.45 16.55 7.45(A)
Rate as per item no 13.50.1 of SH : Finishing
9,999 Sundries L.S. 1.35 1.00 1.35
P/F expansion hold fasteners 6mm threaded
dia 5x4 Nos = 20 nos.
Rate asper item no. 8.8.1.1 of SH :- Marble each 20.00 16.40 328.00(B)
work
Total 570.51
Add 1% for water charges except on A and B 2.35
Total 572.86
Add 15% contractor profit and overhead’s
except on A and B 35.61
Cost for 5 Nos. 608.47
Say 121.70
899
fixed to the already fixed brackets with the help of 30mm x1.6mm galvanised
17.77.2 Total bracket length 810mm of approved shape and design (for two 100mm dia
pipes).
MATERIALS
M.S. flats 50x5mm 50x0.81= 4.05m
@ 1.97 kg/ metre = 7.98 kg.
M.S. flats 30x1.6mm 5x2x0.42 = 4.20m.
O.38kg/metre = 1.60kg.
Total = 9.58kg.
Total = 10.06 kg.
1007 M.S.flats 10.06kg. = 0.1006 quintal quintal 0.1006 3 100.00 311.86
LABOUR:-
0116 Fitter (grade 1) Day 0.048 151.50 7.27
0114 Beldar Day 0.096 135.25 12.98
Priming coat
5x0.81x0.11 =0.45
5x2x0.42x0.063 = 0.26
0.71sqm
Rate as per item no 13.81.1 of SH: Finishing sqm 0.71 16.55 11.75(A)
9999 Sundries L.S. 1.98 1.00 1.98
work
Total 684.52
Add for water charges 1% except on A and B 3.45
Total 687.97
Add 15% contractor profit and overhead’s 52.23
except on A and B
Say 148.05
fixed to the already fixed brackets with the help of 30mm xl.6mm galvanised
900
17.77.3 Total bracket length 1040mm of approved shape and design (for three 100mm
dia pipes).
MATERIALS
M.S. flats 50x5mm 50x1.04= 5.20m
@ 1.97 kg/ metre = 10.24 kg.
M.S. flats 30x1.6mm 5x3x0.42 = 6.30m.
0.38kg/metre = 2.39kg.
Total = 12.63kg.
Total = 13.26 kg.
1007 M.S.flats 13.26kg. = 0.1326 quintal quintal 0.1326 3100.00 411.06
LABOUR:-
0116 Fitter (grade 1) Day 0.063 151.50 9.54
0114 Beldar Day 0.126 135.25 17.04
Priming coat
5xl.04x0.ll =0.57
5x3x0.42x0.063 = 0.40
0.97sqm
Rate as per item no 13.50.1 of SH : Finishing sqm 0.97 16.55 16.05(A)
9,999 Sundries L.S. 2.60 1.00 2.60
work
Total 798.37
Add 1% for water charges 1 % except on A and B 4.54
Total 802.91
Add 15% contractor profit and overhead’s 68.83
except on A and B
Say 174.35
901
SUB HEAD : 18.0

WATER SUPPLY
903
18.1: Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-AL-PE) Composite
Pressure Pipes conforming to IS - 15450 U.V. stabilised with carbon black having
thermal stability for hot & cold water supply, capable to withstand temperature up
to 80° C including all special fittings of composite material (engineering plastic blend
and brass inserts wherever required ) e.g. elbows ,tees ,reducers, couplers &
connectors etc. with clamps at 1.00 metre spacing. This includes testing of joints
complete as per direction of the Engineer in charge. Internal work - Exposed on wall
18.1.1: 1216 (16 mm OD) pipe
Details of cost for 10 metre
MATERIALS
8300 (A) PE-AL-PE Composit pipe 1216
(16 mm OD) pipe Metre 10.00 79.00 790.00
Add 30% for fitting and wastage etc. on (A) 237.00
9999 Cement, sand and grit L.S. 2.73 1.00 2.73
LABOUR
0116 Fitter Day 0.33 151.50 50.00
0117 Asstt. Fitter Day 0.66 141.60 93.46
0114 Beldar Day 0.66 135.25 89.26
TOTAL 1 262.45
TOTAL 1 275.07
Cost for 10 metre 1 466.33
Cost for 1 metre 146.63
Say 146.65
18.1 : Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-AL-PE) Composite

to 80°C including all special fittings of composite material (engineering plastic blend
connectors etc. with clamps at 1.00 metre spacing, this includes testing of joints
complete as per direction of the Engineer in charge. Internal work - Exposed on wall
18.1.2 : 1620 (20 mm OD) pipe
MATERIALS
8301 (A) PE-AL-PE Composit pipe 1620 (20 mm OD) Metre 10.00 97.00 970.00
Pipe
Add 30% for fitting and wastage etc. on (A) 291.00
9999 Cement;sand and grit. L.S. 2.73 1.00 2.73
LABOUR
0116 Fitter Day 0.33 151.50 50.00
0117 Asstt. Fitter Day 0.82 141.60 116.11
0114 Beldar Day 0.66 135.25 89.26
TOTAL 1 519.10
TOTAL 1 534.29
Say 176.45
904
18.1 : Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-AL-PE)
Composite Pressure Pipes conforming to IS - 15450 U.V. stabilised with carbon
black having thermal stability for hot & cold water supply, capable to withstand
temperature up to 80°C including all special fittings of composite material
(engineering plastic blend and brass inserts wherever required ) e.g. elbows
,tees ,reducers, couplers & connectors etc. with clamps at 1.00 metre spacing,
this includes testing of joints complete as per direction of the Engineer in charge.
Internal work - Exposed on wall
18.1.3 : 2025 (25 mm OD) pipe
MATERIALS
8302 (A)PE-AL-PE Composit pipe 2025 (25 mm OD) Meter 10.00 126.00 1260.00
Pipe
Add 30% for fitting and wasteage on (A) 378.00
9999 Cement, Sand and grit L.S. 2.73 1.00 2.73
LABOUR
0116 Fitter Day 0.33 151.50 50.00
0117 Asstt. Fitter Day 0.98 141.60 138.77
0114 Beldar Day 0.66 135.25 89.26
TOTAL 1918.76
TOTAL 1937.95
Say 222.85

18.1.4: 2532 (32 mm OD) pipe
MATERIALS
8303 (A) PE-AL-PE Composit pressure pipe Meter 10.00 172.00 1720.00
Add 30% for fitting and wasteage on (A) 516.00
LABOUR
0116 Fitter Day 0.33 151.50 50.00
0117 Asstt. Fitter Day 0.98 141.60 138.77
0114 Beldar Day 0.98 135.25 132.54
TOTAL 2561.47
TOTAL 2587.08
Say 297.50
905
18.1.5 : 3240 (40 mm OD) pipe
MATERIALS
8304 (A) PE-AL-PE Composit pipe 3240 (40 mm OD) Metre 10.00 227.00 2 270.00
Pipe
Add 30% for fittings and wastage etc on (A) 681.00
LABOUR
0116 Fitter Day 0.33 151.50 50.00
0117 Asstt. Fitter Day 1.31 141.60 185.50
0114 Beldar Day 1.31 135.25 177.18
TOTAL 3 369.01
TOTAL 3 402.70
Say 391.30
18.1: Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-AL-PE) Composite

to 80°C including all special fittings of composite material (engineering plastic
blend and brass inserts wherever required ) e.g. elbows ,tees ,reducers, couplers
& connectors etc. with clamps at 1.00 metre spacing, this includes testing of joints
complete as per direction of the Engineer in charge. Internal work - Exposed on
wall
18.1.6 : 4050 (50 mm OD) pipe
MATERIALS
8305 (A)4050mm PE-AL-PE Composit pressure pipe Metre 10.00 304.00 3040.00
LABOUR
0116 Fitter Day 0.33 151.50 50.00
0117 Asstt. Fitter Day 1.31 141.60 185.50
0114 Beldar Day 1.31 135.25 177.18
TOTAL 4 370.01
TOTAL 4413.71
Say 507.60
906
(engineering plastic blend and brass inserts wherever required ) e.g. elbows , tees,
reducers, couplers & connectors etc. with clamps at 1.00 metre spacing. This
includes the costs of cutting chases and including testing of joints complete as
per direction of the engineer in charge.
Concealed work including cutting chases and making good the wall etc.
18.2.1 : 1216 (16 mm OD) pipe
MATERIALS
8300 (A)PE-AL-PE Composit pipe 1216 (16 mm OD) Metre 10.00 79.00 790.00
Pipe
Add 75% for fitting,clamps and wastage etc on (A) 592.50
Making chases upto 7.5 x 7.5 cm. in walls and
making good the same
(B) Rate as per item no. 18.78 metre 10.00 36.65 366.50
LABOUR
0116 Fitter Day 0.33 151.50 50.00
0117 Asstt. Fitter Day 0.66 141.60 93.46
0114 Beldar Day 0.66 135.25 89.26
TOTAL 1981.72
Add 1% for water charges on all except (B) 16.15
TOTAL 1997.87
on all except (B)
Say 224.25

thermal stability for hot & cold water supply, capable to withstand temperature
up to 80°C including all special fittings of composite material (engineering plastic
blend and brass inserts wherever required ) e.g. elbows ,tees ,reducers, couplers
& connectors etc. with clamps at 1 .Q0 metre spacing. This includes the costs of
cutting chases and including testing of joints complete as per direction of the
engineer in charge.
18.2.2 : 1620 (20 mm OD) pipe
MATERIALS
Pipe
Add 75% for fittings, claps and wastage etc on (A) 727.50
Making chases upto 7:5 x 7.5 cm. in walls and
907

LABOUR
0116 Fitter Day 0.33 151.50 50.00
0117 Asstt. Fitter Day 0.66 141.60 93.46
0114 Beldar Day 0.66 135.25 89.26
TOTAL 2 296.72
TOTAL 2 316.02
on all except (B)
Say 260.85

to 80°C including all special fittings of composite material (engineering plastic blend
connectors etc. with clamps at 1.00 metre spacing. This includes the costs of cutting
chases and including testing of joints complete as per direction of the engineer in
charge.
18.2.3 : 2025 (25 mm OD) pipe
MATERIALS
Pipe
Add 75 % for fittings clamps and wastage etc on (A) 945.00
Makings chases upto 7.5 x 7.5 cm. in walls and
LABOUR
0116 Fitter Day 0.33 151.50 50.00
0117 Asstt.Fitter Day 0.66 141.60 93.46
0114 Beldar Day 0.66 135.25 89.26
TOTAL 2 804.22
TOTAL 2 828.60
on all except (B)
Say 319.80
908
Pressure Pipes conforming to IS - 15450 U.V. stabilised with carbon black having thermal
stability for hot & cold water supply, capable to withstand temperature up to 80°C
including all special fittings of composite material (engineering plastic blend and brass
inserts wherever required ) e.g. elbows ,tees ,reducers, couplers & connectors etc. with
clamps at 1.00. metre spacing. This includes the costs of cutting chases and including
testing of joints complete as per direction of the engineer in charge.
18.2.4: 2532 (32 mm OD) pipe
MATERIALS
8303 (A) PE-AL-PE Composit pipe 2532 (32 mm OD) Metre 10.00 172.00 1 720.00
Pipe
Add 75% for fittings, clamps and wastage etc on (A) 1290.00
(B) Rate as per item no 18.78 metre 10.00 36.65 366.50
LABOUR
0116 Fitter Day 0.33 151.50 50.00
0117 Asstt. Fitter Day 0.66 141.60 93.46
0114 Beldar Day 0.66 135.25 89.26
TOTAL 3 609.22
TOTAL 3 641.65
on all except (B)
Say 413.30
18.3 : Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-AL-PE) Composite Pressure

Pipes conforming to IS - 15450 - 2004 U.V. stabilised with carbon black having thermal
stability for hot & cold water supply, capable to withstand temperature up to 80° C including
all special fittings of composite material (engineering plastic blend and brass inserts wherever
required ) e.g. elbows ,tees ,reducers, couplers & connectors etc. with trenching, refilling
and testing of joints complete as per direction of the engineer in charge. External work
18.3.1 : 1216 (16 mm OD) pipe
MATERIALS
8300 (A) PE-AL-PE Composit pipe 1216 (16 mm OD) Metre 10.00 79.00 790.00
Pipe
LABOUR
0116 Fitter Day 0.08 151.50 12.12
0114 Beldar Day 0.16 135.25 21.64
Trenching and refilling etc.
0114 Beldar Day 0.66 135.25 89.26
0115 Coolie Day 0.66 135.25 89.26
TOTAL 1 239.28
TOTAL 1 251.67
Say 143.95
909
Pressure Pipes conforming to IS - 15450 - 2004 U.V. stabilised with carbon black
having thermal stability for hot & cold water supply, capable to withstand temperature
up to 80 °C including all special fittings of composite material (engineering plastic
blend and brass inserts wherever required ) e.g. elbows ,tees ,reducers, couplers &
connectors etc. with trenching, refilling and testing of joints complete as per direction
of the engineer in charge. External work
External work
18.3.2 1620 (20 mm OD) pipe.
MATERIALS
Pipe
Add 30% for fitting and wastage etc on (A) 291.00
0116 Fitter Day 0.08 151.50 12.12
0114 Beldar Day 0.16 135.25 21.64
0114 Beldar Day 0.66 135.25 89.26
0115 Coolie Day 0.66 135.25 89.26
TOTAL 1 473.28
TOTAL 1 488.01
Say 171.10
18.3. Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-AL-PE) Composite

Pressure Pipes conforming to IS - 15450 - 2004 U.V. stabilised with carbon black having
thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C
including all special fittings of composite material (engineering plastic blend and brass
inserts wherever required ) e.g. elbows ,tees ,reducers, couplers & connectors etc. with
trenching, refilling and testing of joints complete as per direction of the engineer in charge.
External work
18.3.3. 2025 (25 mm OD ) pipe.
Details cost for 10 metre
MATERIALS
8302 (A)2025mm PE-AL-PE Composit pipe Metre 10.00 126.00 1260.00
2025 (25 mm OD) Pipe
LABOUR
0116 Fitter Day 0.08 151.50 12.12
114 Beldar Day 0.16 135.25 21.64
114 Beldar Day 0.66 135.25 89.26
115 Coolie Day 0.66 135.25 89.26
TOTAL 1 850.28
TOTAL 1 868.78
Say 214.90
910
up to 80° C including all special fittings of composite material (engineering plastic
18.3.4 : 2532 (32 mm OD ) pipe.
MATERIALS
8303 (A) 2532 mm PE-AL-PE Composit Metre 10.00 172.00 1720.00
pressure pipe
Add 30% for fittings and wastage etc. on (A) 516.00
LABOUR
0116 Fitter Day 0.08 151.50 12.12
0114 Beldar Day 0.16 135.25 21.64
0114 Beldar Day 0.66 135.25 89.26
0115 Coolie Day 0.66 135.25 89.26
TOTAL 2 448.28
TOTAL 2 472.76
Say 284.35
18.3 Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-AL-PE) Composite

having thermal stability for hot & cold water supply, capable to withstand
temperature up to 80° C including all special fittings of composite material
(engineering plastic blend and brass inserts wherever required ) e.g. elbows ,tees.
reducers, couplers & connectors etc. with trenching^refilling and testing of joints
complete as per direction of the engineer in charge. External work
18.3.5: 3240 (40 mm OD ) pipe.
MATERIALS
8304 (A) PE-AL-PE Composit pipe 3240 Metre 10.00 227.00 2 270.00
(40 mm OD) Pipe
Add 30% for fittings and wastage etc on(A) 681.00
LABOUR
0116 Fitter Day 0.16 151.50 24.24
0114 Beldar Day 0.33 135.25 44.63
0114 Beldar Day 0.66 135.25 89.26
0115 Coolie Day 0.66 135.25 89.26
TOTAL 3 198.39
TOTAL 3 230.37
Say 371.50
911
up to 80° C including all special fittings of composite material (engineering plastic
External work
18.3.6: 4050 (50 mm OD ) pipe.
MATERIALS
8305 (A) 4050mm PE-Al-PE Composit pressure pipe Metre 10.00 304.00 3040.00
LABOUR
0116 Fitter Day 0.16 151.50 24.24
0114 Beldar Day 0.33 135.25 44.63
0114 Beldar Day 0.66 135.25 89.26
0115 Coolie Day 0.66 135.25 89.26
TOTAL 4 199.39
TOTAL 4 241.38
Say 487.75
18.4 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SDR
7.4 U V stabilized & anti -microbial fusion welded, having thermal stability for hot
& cold water supply including all PP - R plain & brass threaded polypropylene
random fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes
testing of joints complete as per direction of Engineer in Charge. (Internal work-
exposed on wall)
18.4.1 PN-16 Pipe, 16 mm OD
Details of cost for 10 metrg
MATERIALS
8625 (A) 3 layer PP-R pipe (PN-16/SDR 7.4) metre 10.00 29.00 290.00
16mm outer dia
LABOUR
0116 Fitter Day 0.33 151.50 50.00
0117 Asstt. Fitter Day 0.66 141.60 93.46
0114 Beldar Day 0.66 135.25 89.26
TOTAL 612.45
TOTAL 618.57
Say 71.15
912
18.4 : Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes
SDR 7.4 U V stabilized & anti - microbial fusion welded, having thermal stability
for hot & cold water supply including all PP-R plain & brass threaded
polypropylene random fittings i/c fixing the pipe with clamps at 1.00 m spacing.
This includes testing of joints complete as per direction of Engineer in Charge.
(Internal work - exposed on wall)
18.4.2 : PN-16 Pipe, 20 mm OD
MATERIALS
20 mm outer dia
Add 30% for fittingsand wastage etc on (A) 132.00
LABOUR
0116 Fitter Day 0.33 151.50 50.00
0117 Asstt. Fitter Day 0.82 141.60 116.11
0114 Beldar Day 0.66 135.25 89.26
TOTAL 830.10
TOTAL 838.40
Say 96.40
18.4 : Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SDR
7.4 U V stabilized & anti - microbial fusion welded, having thermal stability for hot
testing of joints complete as per direction of Engineer in Charge. (Internal work -
exposed on wall)
18.4.3 : PN - 16 Pipe, 25 mm OD
MATERIALS
25 mm outer dia.
LABOUR
0116 Fitter Day 0.33 151.50 50.00
0117 Asstt. Fitter Day 0.98 141.60 138.77
0114 Beldar Day 0.66 135.25 89.26
TOTAL 1 164.76
TOTAL 1 176.41
Say 135.30
913
random fittings i/c fixing the pipe with clampsat 1.00 m spacing. This includes
exposed on wall)
18.4.4 : PN-16 Pipe, 32 mm OD
MATERIALS
8628 (A) 3 layer PP-R pipe (PN-16/SDR 7.4) 32 mm metre 10.00 111.00 1110.00
outer dia.
LABOUR
0116 Fitter Day 0.33 151.50 50.00
0117 Asstt. Fitter Day 0.98 141.60 138.77
0114 Beldar Day 0.98 135.25 132.54
TOTAL 1 768.47
TOTAL 1 786.15
Say 205.40
& cold water supply including all PP-R plain & brass threaded polypropylene
exposed on wall)
18.4.5 : PN-16 Pipe, 40 mm OD
MATERIALS
8629 (A) 3 layer PP-R pipe (PN-16/SDR 7.4) 40 mm metre 10 176.00 1760.00
outer dia
Add 30% fittings wastage etc on (A) 528.00
9999 Cement sand and grit L.S. 5.33 1.00 5.33
LABOUR
0116 Fitter Day 0.33 151.50 50.00
0117 Asstt. Fitter Day 1.31 141.60 185.50
0114 Beldar Day 1.31 135.25 177.18
TOTAL 2 706.01
TOTAL 2 733.07
Say 314.30
914
exposed on wall)
18.4.6 : PN- 16 Pipe, 50 mm OD
MATERIALS
8630 (A) 3 layer PP-R pipe (PN-16/SDR 7.4) 50 mm metre 10 257.00 2 570.00
outer dia
9999 Cement, sandand grit L.S. 5.33 1.00 5.33
LABOUR
0116 Fitter Day 0.33 151.50 50.00
0117 Asstt. Fitter Day 1.31 141.60 185.50
0114 Beldar Day 1.31 135.25 177.18
TOTAL 3 759.01
TOTAL 3 796.60
Say 436.60
random fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes the
cost of cutting chases and making good the same including testing of joints
complete as per direction of Engineer in Chajge. (Concealed work including cutting
chases and making good the walls etc.,)
18.5.1 PN- 16 Pipe, 16 mm OD
MATERIALS
outer dia
Add 75% for fitting clamps and wastage etc on (A) 217.50
LABOUR
0116 Fitter Day 0.33 151.50 50.00
0117 Asstt. Fitter Day 0.66 141.60 93.46
0114 Beldar Day 0.66 135.25 89.26
TOTAL 1106.72
TOTAL 1114.12
on all except (B)
Say 122.65
915
18.5 : Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SDR 7.4 U V
stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water
supply including all PP-R plain & brass threaded polypropylene random fittings i/c fixing
the pipe with clamps at 1.00 m spacing. This includes the cost of cutting chases and
making good the same including testing of joints complete as per direction of Engineer in
Charge. (Concealed work including cutting chases and making good the walls etc.,)
18.5.2: PN-16 Pipe, 20 mm OD
MATERIALS
outer dia
Add 75% for fitting, clamps and wastage etc on (A) 330.00
Making chase upto 7.5 x 7.5 cm. in walls and
LABOUR
0116 Fitter Day 0.33 151.50 50.00
0117 Asstt. Fitter Day 0.66 141.60 93.46
0114 Beldar Day 0.66 135.25 89.26
TOTAL 1369.22
TOTAL 1379.25
on all except (B)
Say 153.10
18.5 : Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SDR 7.4 U V
stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water
supply including all PP-R plain & brass threaded polypropylene random fittings i/c fixing
the pipe with clamps at 1.00 m spacing. This includes the cost of cutting chases and
making good the same including testing of joints complete as per direction of Engineer in
18.5.3 : PN-16 Pipe, 25 mm OD
MATERIALS
8627 (A) 3 layer PP-R pipe (PN-16/SPR 7.4) 25 mm metre 10.00 68.00 680.00
quter dia
Add 75 % for fittings clamps and wastage etc on(A) 832.50
Making chases upto 7.5 x 7.5 cm! in walls and
LABOUR
0116 Fitter Day 0.33 151.50 50.00
0117 Asstt. Fitter Day 0.66 141.60 93.46
0114 Beldar Day 0.66 135.25 89.26
TOTAL 1789.22
TOTAL 1803.45
on all except (B)
Say 201.90
916
random fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes the
cost of cutting chases and making good the same including testing of joints
complete as per direction of Engineer in Charge. (Concealed work including cutting
chases and making good the walls etc.,)
18.5.4 : PN-16 Pipe, 32 mm OD
MATERIALS
8628 (A) 3 layer PP-R pipe (PN-16/SDR 7.4) 32 mm metre 10.00 111.00 1 110.00
outer dia
Making haseiupto 7.5 x 7.5 cm. in walls and
LABOUR
0116 Fitter Day 0.33 151.50 50.00
0117 Asstt. Fitter Day 0.66 141.60 93.46
OH4 Beldar Day 0.66 135.25 89.26
TOTAL 2 541.72
Add 1 % for water charges on all except (B) 21.75
TOTAL 2 563.47
on all except (B)
Say 289.30
random fittings i/c trenching .refilling & testing of joints complete as per direction
of Engineer in Charge. (External work)
18.6.1 : PN-16 Pipe, 16 mm OD
MATERIALS
outer dia
LABOUR
0116 Fitter Day 0.08 151.50 12.12
0114 Beldar Day 0.16 135.25 21.64
0114 Beldar Day 0.66 135.25 89.26
0115 Coolie Day 0.66 135.25 89.26
TOTAL 589.28
TOTAL 595.17
Say 68.45
917
random fittings i/c trenching refilling & testing of joints complete as per direction
18.6.2 : PN-16 Pipe, 20 mm OD
MATERIALS
outer dia
Add 30 % for fittings and wastage etc on (A) 132.00
LABOUR
0116 Fitter Day 0.08 151.50 12.12
0114 Beldar Day 0.16 135.25 21.64
0114 Beldar Day 0.66 135.25 89.26
0115 Coolie Day 0.66 135.25 89.26
TOTAL 784.28
TOTAL 792.12
Say 91.10
18.6.3: PN - 16 Pipe, 25 mm OD
MATERIALS
outer dia
LABOUR
0116 Fitter Day 0.12 151.50 18.18
0114 Beldar Day 0.25 135.25 33.81
0114 Beldar Day 0.66 135.25 89.26
0115 Coolie Day 0.66 135.25 89.26
TOTAL 1 114.51
TOTAL 1 125.66
Say 129.45
918
18.6: Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SDR
18.6.4 : PN-16 Pipe, 32 mm OD
MATERIALS
LABOUR
0116 Fitter Day 0.12 151.50 18.18
0114 Beldar Day 0.25 135.25 33.81
0114 Beldar Day 0.66 135.25 89.26
0115 Coolie Day 0.66 135.25 89.26
TOTAL 1 673.51
TOTAL 1 690.25
Say 194.40
18.6.5 : PN-16 Pipe, 40 mm OD
MATERIALS
8629 (A) 3 1ayer PP-R pipe(PN-16/SDR7.4) 40mm metre 10.00 176.00 1 760.00
outer dia
LABOUR
0116 Fitter Day 0.16 151.50 24.24
0114 Beldar Day 0.33 135.25 44.63
0114 Beldar Day 0.66 135.25 89.26
0115 Coolie Day 0.66 135.25 89.26
TOTAL 2 535.39
TOTAL 2 560.74
Say 294.50
919
random fittings i/c trenching Refilling & testing of joints complete as per direction
18.6.6 : PN - 16 Pipe, 50 mm OD
MATERIALS
quter dia
LABOUR
0116 Fitter Day 0.16 151.50 24.24
0114 Beldar Day 0.33 135.25 44.63
0114 Beldar Day 0.66 135.25 89.26
0115 Coolie Day 0.66 135.25 89.26
TOTAL 3 588.39
TOTAL 3 624.27
Say 416.80
18.6: Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SDR
18.6.7: PN - 16 Pipe, 63mm OD
MATERIALS
8631 (A) 3 layer PP-R pipe (PN-16/SPR 7.4) 63 mm metre 10.00 400.00 4 000.00
outer dia
LABOUR
0116 Fitter Day 0.25 151.50 37.88
0114 Beldar Day 0.66 135.25 89.26
0114 Beldar Day 0.66 135.25 89.26
0115 Coolie Day 0.66 135.25 89.26
TOTAL 5 505.66
TOTAL 5560.72
Say 639.50
920
18.6.8 : PN - 16 Pipe, 75 mm OD

MATERIALS
8632 (A) 3 layer PP-R pipe (PN-16/SDR 7.4) 75 mm Metre 10.00 575.00 5750.00
outer dia
LABOUR
0116 Fitter Day 0.25 151.50 37.88
0114 Beldar Day 0.66 135.25 89.26
0114 Beldar Day 0.66 135.25 89.26
0115 Coolie Day 0.66 135.25 89.26
TOTAL 7 780.66
TOTAL 7 858.47
Add 15 % for contractor’s profit and overheads 1 178.77
Say 903.70
18.6.9 : PN - 16 Pipe, 90 mm OD
MATERIALS
outer dia
LABOUR
0116 Fitter Day 0.37 151.50 56.06
0114 Beldar Day 0.97 135.25 131.19
0114 Beldar Day 0.80 135.25 108.20
0115 Coolie Day 0.80 135.25 108.20
TOTAL 12 324.65
TOTAL 12 447.90
Say 1431.50
921
18.6.10: PN - 10 Pipe, 110 mm OD (SDR - 11)
MATERIALS
8634 (A) 3 layer PP-R pipe (PN-16/SDR 7.4)110 mm metre 10.00 962.00 9 620.00
outer dia
LABOUR
0116 Fitter Day 0.37 151.50 56.06
0114 Beldar Day 0.97 135.25 131.19
0114 Beldar Day 0.80 135.25 108.20
0115 Coolie Day 0.80 135.25 108.20
TOTAL 12 909.65
TOTAL 13 038.75
Say 1 499.45
18.6.11 PN-10 Pipe, 160 mm OD (SDR- 11)
MATERIALS
8635 (A) 3 layer PP-R pipe (PN-16/SDR7.4) 160 mm metre 10.00 2 028.00 20 280.00
outer dia
LABOUR
0116 Fitter Day 0.58 151.50 87.87
0114 Beldar Day 1.54 135.25 208.28
0114 Beldar Day 1.28 135.25 162.30
0115 Coolie Day 1.20 135.25 162.30
TOTAL 26 984.75
TOTAL 27 254.60
Say 3 134.30
922
18.7 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having
thermal stability for hot & cold water supply including all CPVC plain & brass
threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes
jointing of pipes & fittings with one step CPVC solvent cement and testing of
joints complete as per direction of Engineer in Charge. (Internal work Exposed
on wall)
18.7.1: 15 mm nominal outer dia .Pipes.
MATERIALS
8636 (A) 15 mrnputer dia CPVCpipe metre 10.00 45.00 450.00
LABOUR
0116 Fitter Day 0.33 151.50 50.00
0 117 Asstt. Fitter Day 0.82 141.60 116.11
0114 Beldar Day 0.66 135.25 89.26
TOTAL 843.10
TOTAL 851.53
Say 97.95
18.7 Providing and fixing Chlorinated Poly vinyl Chloride (CPVC) pipes, having
on wall)
18.7.2 20 mm nominal outer dia .Pipes.
MATERIALS
8637 (A) 20 mm outer dia CPVC pipe , metre 10.00 55.00 780.00
LABOUR
0116 Fitter Day 0.33 151.50 50.00
0117 Asstt. Fitter Day 0.98 141.60 138.77
0114 Beldar Day 0.66 135.25 89.26
TOTAL 995.76
TOTAL 1 005.72
Say 115.65
923
18.7: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal
stability for hot & cold water supply including all CPVC plain & brass threaded
fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of
pipes & fittings with one step CPVC solvent cement and testing of joints complete
as per direction of Engineer in Charge, (Internal work- Exposed on wall)
18.7.3 : 25 mm nominal outer dia .Pipes.
MATERIALS
8638 (A) 25mm outer dia CPVC pipe metre 10.00 78.00 780.00
9999 Cement, sand & grit etc. L.S 2.73 1.00 2.73
LABOUR
0116 Fitter Day 0.33 151.50 50.00
0117 Asstt. Fitter Day 0.98 141.60 138.77
0114 Beldar Day 0.66 135.25 89.26
TOTAL 1 294.76
TOTAL 1 307.71
Say 150.40
18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal
pipes & fittings with one step CPVC solvent cement and testing of joints complete
as per direction of Engineer in Charge. (Internal work Exposed on wall)
MATERIALS
8639 (A) 32mm outer dia CPVC pipe metre 10.00 105.00 1 050.00
9999 Cement, sanaand gritetcai L.S. 4.16 1.00 4.16
LABOUR
0116 Fitter Day 0.33 151.50 50.00
0117 Asstt. Fitter Day 0.98 141.60 138.77
0114 Beldar Day 0.98 135.25 132.54
TOTAL 1 690.47
TOTAL 1 707.37
Say 196.35
924
on wall)
MATERIALS
8640 (A) 40 mm outer dia CPVC Pipe metre 10.00 150.00 1500.00
9999 Cement, sand & grit L.S. 5.33 1.00 5.33
LABOUR
0116 Fitter Day 0.33 151.50 50.00
0117 Asstt. Fitter Day 1.31 141.60 185.50
0114 Beldar Day 1.31 135.25 177.18
TOTAL 2 368.01
TOTAL 2 391.69
Say 275.05
threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This
includes jointing of pipes & fittings with one step CPVC solvent cement and
testing of joints complete as per direction of Engineer in Charge. (Internal
work Exposed on wall)
MATERIALS
8641 (A) 50mm outer dia CPVC pipe metre 10.00 245.00 2450.00
9999 Cement sand and :grit etc L.S. 5.33 1.00 5.33
LABOUR
0116 Fitter Day 0.33 151.50 50.00
0 117 Asstt. Fitter Day 1.31 141.60 185.50
0114 Beldar Day 1.31 135.25 177.18
TOTAL 3 603.01
TOTAL 3 639.04
Say 418.50
925
stability for hot & cold water supply including all CPVC plain & brass threaded fittings
i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes &
fittings with one step CPVC solvent cement and the cost of cutting chases and making
good the same including testing of joints complete as per direction of Engineer in
MATERIALS
8636 (A) 15 mmouter dia CPVC Pipe metre 10.00 45.00 450.00
Making chases upto 7.5x7.5 cm.in walls and
LABOUR
0116 Fitter Day 0.33 151.50 50.00
0117 Asstt. Fitter Day 0.66 141.60 93.46
0114 Beldar Day 0.66 135.25 89.26
TOTAL 1 386.72
TOTAL 1 396.92
on all except (B)
Say 155.15
18.8 : Providing and fixing Chlorinated Poly vinyl Chloride (CPVC) pipes, having thermal
stability for hot & cold water supply including all CPVC plain & brass threaded fittings
i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes &
fittings with one step CPVC solvent cement and the cost of cutting chases and making
good the same including testing of joints complete as per direction of Engineer in
MATERIALS
8637 (A) 20 mm outerdia CPVC pipe metre 10.00 55.00 550.00
Making chases upto 7.5x7.5 cm in walls and
LABOUR
0116 Fitter Day 0.33 151.50 50.00
0117 Asstt. Fitter Day 0.66 141.60 93.46
0114 Beldar Day 0.66 135.25 89.26
TOTAL 1 561.72
926

TOTAL 1 573.67
on all except (B)
Say 175.50
18.8 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal
pipes & fittings with one step CPVC solvent cement and the cost of cutting chases
and making good the same including testing of joints complete as per direction of
Engineer in Charge. (Concealed work including cutting chases and making good
the walls etc.,)
MATERIALS
8638 (A) 25 mm outerdia CPVC metre 10.00 78.00 780.00
Making chases upto 7.5x7.5 cm in walls and
LABOUR
0116 Fitter Day 0.33 151.50 50.00
0117 Asstt. Fitter Day 0.66 141.60 93.46
0114 Beldar Day 0.66 135.25 89.26
TOTAL 1 964.22
TOTAL 1 980.20
on all except (B)
Say 222.25
927
pipes & fittings with one step CPVC solvent cement and the cost of cutting chases
and making good the same including testing of joints complete as per direction of
Engineer in Charge. (Concealed work including cutting chases and making good
the walls etc.,)

MATERIALS
8639 (A) 32 mm outer dia CPVC pipe metre 10.00 105.00 1 050.00
Add 75% for fillings clamps, wastage etc. on (A) 787.50
Making chases upto 7.57.5 cm in walls and
LABOUR
0116 Fitter Day 0.33 151.50 50.00
0117 Asstt. Fitter Day 0.66 141.60 93.46
0114 Beldar Day 0.66 135.25 89.26
TOTAL 2 436.72
TOTAL 2 457.42
on all except (B)
Say 277.10
fittings, this included jointing of pipes & fittings with one step CPVC solvent cement,
trenching, refilling & testing of joints complete as per direction of Engineer in
Charge. (External work).

MATERIALS
8636 (A) 15 mm outer dia CPVC pipe metre 10.00 45.00 450.00
Add 30% for fillings and wastage etc. on (A) 135.00
LABOUR
0116 Fitter Day 0.08 151.50 12.12
0114 Belder Day 0.16 135.25 21.64
0114 Beldar Day 0.66 135.25 89.26
0115 Coolie Day 0.66 135.25 89.26
TOTAL 797.28
TOTAL 805.25
Say 92.60
928
fittings, this included jointing of pipes & fittings with one step CPVC solvent cement ,
trenching refilling & testing of joints complete as per direction of Engineer in Charge.
(External work).

MATERIALS
8637 (A) 20 mm outer dia CPVC pipe metre 10.00 55.00 550.00
LABOUR
0116 Fitter Day 0.08 151.50 12.12
0114 Belder Day 0.16 135.25 21.64
0114 Beldar Day 0.66 135.25 89.26
0115 Coolie Day 0.66 135.25 89.26
TOTAL 927.28
TOTAL 936.55
Say 107.70
(External work).

MATERIALS
8638 (A) 25 mm nominal outer dia CPVC pipe metre 10.00 78.00 780.00
LABOUR
0116 Fitter Day 0.12 151.50 18.18
0114 Beldar Day 0.25 135.25 33.81
0114 Beldar Day 0.66 135.25 89.26
0115 Coolie Day 0.66 135.25 89.26
TOTAL 1 244.51
TOTAL 1 256.96
Say 144.55
929
(External work).

MATERIALS
8639 (A) 32 mm outer dia CPVC pipe metre 10.00 105.00 1 050.00
LABOUR
0116 Fitter Day 0.12 151.50 18.18
0114 Beldar Day 0.25 135.25 33.81
0 114 Beldar Day 0.66 135.25 89.26
0115 Coolie Day 0.66 135.25 89.26
TOTAL 1 595.51
TOTAL 1 611.47
Say 185.30
(External work).

MATERIALS
LABOUR
0116 Fitter Day 0.16 151.50 24.24
0114 Beldar Day 0.33 135.25 44.63
0114 Beldar Day 0.66 135.25 89.26
0115 Coolie Day 0.66 135.25 89.26
TOTAL 2 197.39
TOTAL 2 219.36
Say 255.25
930
trenching .refilling & testing of joints complete as per direction of Engineer in
Charge. (External work).

MATERIALS
LABOUR
0116 Fitter Day 0.16 151.50 24.24
0114 Beldar Day 0.33 135.25 44.63
0114 Beldar Day 0.66 135.25 89.26
0115 Coolie Day 0.66 135.25 89.26
TOTAL 3 432.39
TOTAL 3 466.71
Say 398.65
(External work).
18.9.7 62.50 mm nominal inner dia Pipes.

MATERIALS
8642 (A) Chlorinated polyvinyl- chloride (CPVC) pipe metre 10.00 783.00 7 830.00
62.5 mm inner dia.
LABOUR
0116 Fitter Day 0.25 151.50 37.88
0114 Beldar Day 0.66 135.25 89.26
0114 Beldar Day 0.66 135.25 89.26
0115 Coolie Day 0.66 135.25 89.26
TOTAL 10 484.66
TOTAL 10 589.51
Say 1 217.80
931
(External work).
18.9.8 75 mm nominal inner dia .Pipes.

MATERIALS
8643 (A) Chlorinated polyvinyl- chloride (CPVC) pipe metre 10.00 1 030.00 1 0,300.00
75 mm inner dia.
LABOUR
0116 Fitter Day 0.25 151.50 37.88
0114 Beldar Day 0.66 135.25 89.26
0114 Beldar Day 0.66 135.25 89.26
0115 Coolie Day 0.66 135.25 89.26
TOTAL 13 695.66
TOTAL 13 832.62
Say 1 590.75
trenching .refilling & testing of joints complete as per direction of Engineer in Charge.
(External work).
18.9.9 100mm nominal inner dia .Pipes.

MATERIALS
8644 (A)Chlorinated Polyvinyl - chloride (CPVC) pipe metre 10.00 1 430.00 14 300.00
100 mm inner dia.
LABOUR
0116 Fitter Day 0.37 151.50 56.06
0114 Beldar Day 0.97 135.25 131.19
0114 Beldar Day 0.80 135.25 108.20
0115 Coolie Day 0.80 135.25 108.20
TOTAL 18 993.65
TOTAL 19 183.59
Say 2 206.10
932
(External work).
18.9.10 150 mm nominal inner dia .Pipes.

MATERIALS
8645 (A)Chlorinated Polyvinyl-chloride (CPVC) pipe metre 10.00 2 490.00 24 900.00
150 mm inner dia.
LABOUR
0116 Fitter Day 0.58 151.50 87.87
0114 Beldar Day 1.54 135.25 208.28
0114 Beldar Day 1.20 135.25 162.30
0115 Coolie Day 1.20 135.25 162.30
TOTAL 32 990.75
TOTAL 33 320.66
Say 3 831.90
18.10 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including
cutting and making good the walls etc. Iinternal work - Exposed on wall :
18.10.1 15 mm dia. nominal bore

MATERIALS
1545 (A) 15 mm dia G.I. Pipe metre 11.50 58.00 667.00
2271 (B) Carriage of pipe approx weight of tonne 0.014145 47.29 0.67
10m = 12.30 kg
Added 15% for fittings and wastage on A & B
9999 White lead, hemp, oil etc. L.S. 8.06 1.00 8.06
LABOUR
0116 Fitter Day 0.33 151.50 50.00
0117 Asstt. Fitter Day 0.66 141.60 93.46
0114 Beldar Day 0.66 135.25 89.26
TOTAL 911.18
TOTAL 920.29
Say 105.85
933
cutting and making good the walls etc. Iinternal work - Exposed on wall:

MATERIALS
10m = 15.90 kg
Added 15% for fittings and wastage inf (A & B)
LABOUR
0116 Fitter Day 0.33 151.50 50.00
0117 Asstt. Fitter Day 0.82 141.60 116.11
0114 Beldar Day 0.66 135.25 89.26
TOTAL 1 152.52
TOTAL 1 164.05
Say 133.85

MATERIALS
1547 (A) 25 mm dia G.I. Pipe metre 11.50 109.00 1 253.50
10m = 24.60 kg
Added 15% for fittings and wastage in (A & B)
LABOUR
0116 Fitter Day 0.33 151.50 50.00
0117 Asstt. Fitter Day 0.98 141.60 138.77
0114 Beldar Day 0.66 135.25 89.26
TOTAL 1 546.52
TOTAL 1 561.52
Say 179.65
934
cutting and making good the walls etc. Iinternal work - Exposed on wall :
MATERIALS
10m = 31.70 kg
LABOUR
0116 Fitter Day 0.33 151.50 50.00
0117 Asstt. Fitter Day 0.98 141.60 138.77
0114 Beldar Day 0.98 135.25 132.54
TOTAL 1 946.68
TOTAL 1 966.15
Say 226.10

MATERIALS
10m = 36.50 kg
LABOUR
0116 Fitter Day 0.33 151.50 50.00
0117 Asstt. Fitter Day 1.31 141.60 185.50
0114 Beldar Day 1.31 135.25 177.18
TOTAL 2 273.51
TOTAL 2 296.25
Say 264.05

MATERIALS
10m = 51.70 kg
935
LABOUR
0116 Fitter Day 0.33 151.50 50.00
0117 Asstt. Fitter Day 1.64 141.60 232.22
0114 Beldar Day 1.64 135.25 221.81
TOTAL 2 952.19
TOTAL 2 981.71
Say 342.90
18.11 Concealed pipe including painting with anti corrosive bitumastic paint, cutting
chases and making good the wall
18.11.1 15 mm dia nominal bore

MATERIALS
10m = 12.30 kg
Painting G.I. pipe with anti-corrosive
bitumastic paint two or more coats
(C) (Rate same as per item no. 18.40.1 metre 10.00 2.60 26.00
Making chases upto 7.5x7.5cm in walls and
(D) Rate as per item no. 18.78 metre 10.00 36.65 366.50
Labour :-
0116 Fitter Day 0.33 151.50 50.00
0117 Asstt. fitter Day 0.66 141.60 93.46
0114 Beldar Day 0.66 135.25 89.26
TOTAL 1 300.95
Add for water charges @ 1% on all except 9.08
C+D
TOTAL 1 310.03
Add for contractor’s profit & overheads @ 137.63
15 % on all except C+D
Say 144.75
18.11 Concealed pipe including painting with anti corrosive bitumastic paint, cutting
chases and making good the wall

MATERIALS
10m = 12.30 kg
936
Painting G.I. pipe with anti-corrosive
bitumastic paint two or more coats
(C) (Rate same as per item no. 18.40.1 metre 10.00 2.60 26.00
Making chases upto 7.5x7.5cm in walls and
(D) (Rate as per item no. 18.78 metre 10.00 36.65 366.50
Labour :-
0116 Fitter Day 0.33 151.50 50.00
0117 Asstt. fitter Day 0.66 141.60 93.46
0114 Beldar Day 0.66 135.25 89.26
TOTAL 1 519.64
Add for water charges @ 1% on all except 11.27
C+D
TOTAL 1 530.91
Add for contractor’s profit & overheads @ 170.76
15 % on all except C+D
Say 170.15
18.12 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and
refilling etc. (external work):

Materials :-
1545 (A) 15 mm dia G.I. Pipes metre 10.20 58.00 591.60
10m = 12.30 kg
Labour :-
0116 Fitter Day 0.08 151.50 12.12
0114 Beldar Day 0.16 135.25 21.64
0114 Beldar Day 0.66 135.25 89.26
0115 Coolie Day 0.66 135.25 89.26
TOTAL 809.80
TOTAL 817.90
Say 94.05

Materials :-
1546 (A) 20 mm dia G.I. Pipes metre 10.20 77.00 785.40
10m = 12.30 kg
937
Labour :-
0116 Fitter Day 0.08 151.50 12.12
0114 Beldar Day 0.16 135.25 21.64
0114 Beldar Day 0.66 135.25 89.26
0115 Coolie Day 0.66 135.25 89.26
TOTAL 1 003.78
TOTAL 1 013.82
Say 116.60
Materials :-
1547 (A) 25 mm dia G.I. Pipes metre 10.20 109.00 1 111.80
10m = 24.60 kg
Labour :-
0116 Fitter Day 0.12 151.50 18.18
0114 Beldar Day 0.25 135.25 33.81
0114 Beldar Day 0.66 135.25 89.26
0115 Coolie Day 0.66 135.25 89.26
TOTAL 1 350.26
TOTAL 1 363.76
Say 156.85
Materials :-
10m = 31.70 kg
Labour :-
0116 Fitter Day 0.12 151.50 18.18
0114 Beldar Day 0.25 135.25 33.81
0114 Beldar Day 0.66 135.25 89.26
938

0115 Coolie Day 0.66 135.25 89.26
TOTAL 1 666.80
TOTAL 1 683.47
Say 193.60
Materials :-
10m = 36.50 kg
Labour :-
0116 Fitter Day 0.16 151.50 24.24
0114 Beldar Day 0.33 135.25 44.63
0114 Beldar Day 0.66 135.25 89.26
0115 Coolie Day 0.66 135.25 89.26
TOTAL 1 890.64
TOTAL 1 909.55
Say 219.60
18.12 Providing and fixing G.I. pipes complete with G.I. fittings including trenching an d
Materials :-
10m = 51.70 kg
Labour :-
0116 Fitter Day 0.16 151.50 24.24
0114 Beldar Day 0.33 135.25 44.63
0114 Beldar Day 0.66 135.25 89.26
0115 Coolie Day 0.66 135.25 89.26
TOTAL 2 411.57
TOTAL 2 435.69
Say 280.10
939
18.12 Providing and fixing G.I. pipes complete with G.I. fittingsincluding trenching an d

Materials :-
10m = 66.30 kg
Labour :-
0116 Fitter Day 0.25 151.50 37.88
0114 Beldar Day 0.66 135.25 89.26
0114 Beldar Day 0.66 135.25 89.26
0115 Coolie Day 0.66 135.25 89.26
TOTAL 3 066.18
TOTAL 3 096.84
Say 356.15
18.12 Providing and fixing G.I. pipes complete with G.I. fittingsincluding trenching an d

Materials :-
10m = 86.40 kg
Labour :-
0116 Fitter Day 0.25 151.50 37.88
0114 Beldar Day 0.66 135.25 89.26
0114 Beldar Day 0.66 135.25 89.26
0115 Coolie Day 0.66 135.25 89.26
TOTAL 3 944.35
TOTAL 3 983.79
Say 458.15
940
18.13 Making connection of G.I. distribution branch with G.I. main of following sizes by
providing and fixing tee, including cutting and threading the pipe etc. complete :
18.13.1 25 to 40 mm nominal bore
Details of cost for one connection.

Take 25mm dia as an average size.
Materials:-
1608 G.I. Tee 25 mm dia each 1.00 38.00 38.00
1555 G.L. jam nut 25mm each 1.00 5.00 5.00
9999 Carriage of materials and sundries L.S. 5.33 1.00 5.33
Labour :-
0116 Fitter Day 0.33 151.50 50.00
0114 Beldar Day 0.33 135.25 44.63
TOTAL 142.96
TOTAL 144.39
Cost for one connection 166.05
Say 166.05
18.13 Making connection of G.I. distribution branch with G.I. main of following sizes by
providing and fixing tee, including cutting and threading the pipe etc. complete :
18.13.2 50 to 80 mm nominal bore
Details of cost for one connection.

Take 65mm dia as an average size.
Materials:-
1612 G.I. Tee 25 mm dia each 1.00 215.00 215.00
1559 G.I. jam nut 65mm each 1.00 15.00 15.00
Labour :-
0116 Fitter Day 0.45 151.50 68.18
0114 Beldar Day 0.45 135.25 60.86
TOTAL 364.37
TOTAL 368.01
Cost for one connection 423.21
Say 423.20
18.14 Fixing water meter and stop cock in G.I. pipe line including cutting and threading
the pipe and making long screws etc. complete (cost of water meter and stop cock
to be paid separately).
Details of cost for one meter with stop cock

Materials :-
1555 G .I. Jam nut 25mm dia. each 1.00 5.00 5.00
0116 Fitter Day 0.33 151.50 50.00
0114 Beldar Day 0.33 135.25 44.63
TOTAL 104.96
941

TOTAL 106.01
Cost for one metre with stop cock 121.91
Say 121.90
18.15 Providing and fixing brass bib cock of approved quality :

18.15.1 15 mm nominal bore
Materials :-
1339 15mm dia. brass bib cock. each 1.00 157.00 157.00
9999 Carriage of materials and fixing charge L.S. 8.06 1.00 8.06
TOTAL 165.06
TOTAL. 166.71
Say 191.70
18.15 Providing and fixing brass bib cock of approved quality:

Materials :-
1340 20mm dia. brass bih cock. each 1.00 193.00 193.00
9999 Carriage of materials and fixing charge L.S. 9.49 1.00 9.49
TOTAL 202.49
TOTAL 204.51
Say 235.20
18.16 Providing and fixing brass stop cock of approved quality :

Materials :-
1342 15mm dia. brass bib cock, each 1.00 157.00 157.00
TOTAL 165.06
TOTAL 166.71
Say 191.70
18.16 Providing and fixing brass stop cock of approved quality :

Materials :-
1343 20mm dia. brass bib cock, each 1.0 193.00 193.00
942

TOTAL 202.49
TOTAL 204.51
Say 235.20
18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality
(screwed end):
Materials :-
1927 25mm dia. Gun metal gate valve with wheel each 1.00 235.00 235.00
TOTAL 245.79
TOTAL 248.25
Say 285.50
(screwed end)
18.17.2 32 mm nominal bore.
Materials :-
1928 32mm dia. Gun metal gate valve with wheel each 1.00 296.00 296.00
9999 Carriage of material and fixing charge L.S. 12.22 1.00 12.22
TOTAL 308.22
TOTAL 311.30
Say 358.00
(screwed end)
Materials :-
1929 40mm dia Gun metal gate valve with wheel each 1.00 330.00 330.00
TOTAL 343.52
TOTAL 346.96
Say 399.00
943
(screwed end):
Materials :-
TOTAL 497.82
TOTAL 502.80
Say 578.20
18.17 Providing and fixing gun metal gate valve with C.I wheel of approved quality
(screwed end):
Materials :-
TOTAL 716.00
TOTAL 723.28
Say 831.75
18.17 Providing and fixing gun metal gate valve with C.I.wheel of approved quality
(screwed end):
Materials :-
TOTAL 1178.85
TOTAL 1190.64
Say 1369.25
18.18 Providing and fixing ball valve (brass) of approved quality complete :
18.18.1 High or low pressure with plastic floats:
18.18.1.1 15 mm nominal bore
Materials :-
1922 15mm ball valve each 1.00 175.00 175.00
944

TOTAL 196.58
TOTAL 198.55
Say 228.35
18.18.1 High or low pressure with plastic floats :
Materials :-
TOTAL 286.91
TOTAL 289.78
Say 333.25
18.18.1 High or low pressure with plastic floats:
Materials :-
TOTAL 332.24
TOTAL 333.56
Say 385.90
18.19 Providing and fixing gun metal non-return valve of approved quality (screwed
end):
18.19.1.1 Horizontal
Materials :-
1933 25mm non return valve each 1.00 238.00 238.00
TOTAL 251.52
TOTAL 254.04
Say 292.15
945
end):
18.19.1.2 Vertical
Materials :-
TOTAL 273.52
TOTAL 276.26
Say 317.70
18.19 Providing and fixing gun metal non- return valve of approved quality (screwed
end):
Materials :-
TOTAL 319.82
TOTAL 323.02
Say 371.45
end):
18.19.2.2 Vertical
Materials :-
TOTAL 399.82
TOTAL 403.82
Say 464.40
end):
Materials :-
1935 40mm non-return valve each 1.00 410.00 410.00
946

TOTAL 426.12
TOTAL 430.38
Say 494.95
end):
18.19.3.2 Vertical
Materials :-
3088 40mm non-return valve each 1.00 505.00 505.00
TOTAL 521.12
TOTAL 526.33
Say 605.30
end):
Materials :-
TOTAL 635.55
TOTAL 641.91
Say 738.28
end):
18.19.4.2 Vertical
Materials :-
TOTAL 729.55
TOTAL 736.85
Say 847.40
end):
947
Materials :-
TOTAL 1103.85
TOTAL 1114.89
Say 1282.10
end)
18.19.5.2 Vertical
Materials :-
TOTAL 1236.85
TOTAL 1276.49
Say 1467.95
end)
Materials :-
TOTAL 1560.28
TOTAL 1575.88
Say 1812.25
end)
18.19.6.2 Vertical
Materials :-
TOTAL 2058.28
TOTAL 2078.86
Say 2390.70
948
18.20 Providing and fixing brass ferrule with C.I. mouth cover including boring and
tapping the main :
Materials :-
1360 15mrn diameter brass-ferrule each 1.00 80.00 80.00
9999 Carriage of material and fixing charges L.S. 40.30 1.00 40.30
TOTAL 120.30
TOTAL 121.50
Say 139.75
tapping the main :
Materials :-
1361 20mm diameter brass-ferrule, each 1.00 114.00 114.00
TOTAL 161.19
TOTAL 162.80
Say 187.20
tapping the main
Materials :-
1362 25mm diameter brass-ferrule, each 1.00 156.00 156.00
TOTAL 209.82
TOTAL 211.92
Say 243.70
18.21 Providing and fixing uplasticised PVC connection pipe with brass unions :
18.21.1 30 cm length

Materials :-
1687 15mm P.V.C. connection.pipe with brass each 1.0 18.00 18.00
949
Unions
TOTAL 30.22
TOTAL 30.52
Say 35.10

Materials :-
Unions
TOTAL 37.22
TOTAL 37.59
Say 43.25

Materials :-
Unions
TOTAL 38.52
TOTAL 38.91
Say 44.75
Materials :-
1690 20mm P.V.C. connection pipe with brass each 1.00 35.00 35.00
unions
950
TOTAL 48.52
TOTAL 49.01
Say 56.35
18.22 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet:
18.22.1 100 mm diameter

Materials :-
1878 100mm dia. C,P., brass shower rose each 1.00 28.00 28.00
TOTAL 34.76
TOTAL 35.11
Say 40.40
18.22 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet:
Materials :-
1879 150mm dia. C,P., brass shower rose each 1.00 40.00 40.00
TOTAL 48.06
TOTAL 48.54
Say 55.80
18.23 Laying in position centrifugally cast (spun) iron S&S or flanged pipes (excluding
cost of pipe)
Details of cost for 5.14 quintal

10 m of 200 mm dia C.I. pipe class ‘A’
Weight = (2x257) = 514kg = 5.14 quintal
Labour for laying pipe
0116 Fitter Day 0.17 151.50 25.76
0117 Asstt. Fitter Day 0.17 141.60 24.07
0114 Beldar Day 1.33 135.25 179.88
9999 Sundries L.S. 16.12 1.00 16.12
TOTAL 245.83
TOTAL 248.29
Cost for 5.14 quintal 285.53
Cost per quintal 55.55
Say 55.55
951
18.24 Laying in position S&S or flanged C.I. special such tees, bends collars, tapers
and caps etc. (excluding cost of specials).
Details of cost for 7quintal

10 Nos. Tee 200x150mm Weight = 70x10 =
700kg.
Labour for laying tee-
0116 Fitter Day 0.93 151.50 140.90
0117 Asst. Fitter Day 0.62 141.60 87.79
0114 Beldar Day 2.48 135.25 335.42
9999 Sundries L.S. 40.17 1.00 40.17
TOTAL 604.28
TOTAL 610.32
Cost for 7 quintal 701.87
Cost per quintal 100.27
Say 100.25
18.25 Providing and laying S&S C.I. standard specials such as tees, bends, collars,
tapers, caps etc. (Heavy class)
18.25.1 Upto 300 mm dia.
Details of cost for 1 quintal
Materials :-
1464 Cost of specials quintal 1.00 2400.00 2400.00
2309 Carriage of material tonne 0.10 47.29 4.73
LABOUR
(A) For laying rate as per Item No 18.24 quintal 1.00 100.25 100.25
TOTAL 2504.98
TOTAL 2529.03
on all except A
Cost for one quintal 2893.35
Say 2893.35
18.25 Providing and laying S&S C.I. standard specials such as tees, bends, collars,
tapers, caps etc.(Heavy class):
18.25.2 Over 300 mm dia.
Materials :-
2309 Carriage of materials tonne 0.10 47.29 4.73
LABOUR
TOTAL 2699.98
TOTAL 2725.98
on all except A
Say 3119.85
952
18.26 Providing and laying flanged C.I. standard specials such as tees, bends, collars,
tapers, caps etc., suitable for flanged jointing as per IS : 1538 :
18.26.1 Upto 300 mm dia.

Materials :-
LABOUR
TOTAL 4424.98
TOTAL 4468.23
Say 5123.45
18.26 Providing and laying flanged C.I. standard specials such as tees, bends, collars,
tapers, caps etc., suitable for flanged jointing as per IS : 1538 :
18.26.2 Over 300 mm dia.

Materials :-
LABOUR
TOTAL 4876.98
Add 1% for water charges on all except B 47.77
TOTAL 4924.75
Say 5648.45
953
18.27 Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA)
conforming to IS - 1536
18.27.1 100 mm dia, pipe
Materials :-
100mm dia. spun iron pipes (in 5.5 m lengths)
weightof 1m pipe = 19.820 kg
Weight of 10m pipes 19.820x10= 198.20 Kg
7697 Cost of pipe metre 10.00 624.00 6240.00
2319 Carriage of pipes 100 m. 10.00 116.30 11.63
Labour for lay ing
(A) Rate same as per item no 18.23 quintal 1.98 55.55 109.99
TOTAL 6 361.62
Add for water charges @1% on all except ‘A’ 62.52
TOTAL 6 424.14
Add for contractor’s profit and overheads 947.12
@15%onallexecpt’A’
Say 737.15
conforming to IS- 1536
18.27.2 125 mm dia. pipe
Materials :-
Weight of 10m pipes 25.820x10 = 258.20 Kg
7698 Cost of pipe metre 10.00 763.00 7 630.00
Labour for laying
TOTAL 7788.86
TOTAL 7865.32
on all execpt ’A’
Say 902.35
conforming to IS -1536
18.27.3 150 mm dia. pipe
Materials :-
954

weight of 1m pipe = 32.18 kg
Labour for laying
TOTAL 9208.25
Add for water charges @ 1 % on all except ‘A’ 90.29
TOTAL 9298.54
@ 15 % on all execpt ‘A’
Say 1066.65
conforming to IS- 1536:
18.27.4 200 mm dia. pipe

Materials :-
2322 Carriage of pipes 100m. 10.00 315.30 31.53
Labour for laying
(A) Rate same as per item no 18.23 of SH : Water quintal 4.71 55.55 261.64
Supply
TOTAL 12813.17
TOTAL 12938.69
©15% on all execpt ’A’
Say 1484.00
conforming to IS - 1536:
18.27.5 250 mm dia. pipe

Materials :-
955
Labour for laying

(A) Rate same as per item no18.23 quintal 6.35 55.55 352.74
TOTAL 18187.54
TOTAL 18365.89
@ 15% on all execpt ’A’
Say 2106.80
18.27.6 300 mm dia. pipe

Materials:-
Labour for laying
TOTAL 24169.78
TOTAL 24406.93
@15% on all execpt ’A’
Say 2800.00
18.27.7 350 mm dia. pipe

Materials :-
Weight of 10m pipes 103.10x10 =1031.00 kg
Labour for laying
TOTAL 29830.25
956
TOTAL 30122.83
Say 3455.55
18.27.8 400 mm dia. pipe

Materials :-
2326 Carriage of pipes 100m 10.00 1057.26 105.73
Labour for laying
TOTAL 36542.88
TOTAL 36901.34
@15%oonallexecpt ’A’
Say 4233.20
18.27.9 450 mm dia. pipe
Materials :-
Weight of 10m pipes 151.270x 10 = 1512.70 Kg
Labour for laying
TOTAL 43729.69
TOTAL 44158.58
@15%on all execpt ’A’
Say 5065.65
957
18.27.10 500 mm dia. pipe

Materials :-
Labour for laying
TOTAL 53223.01
TOTAL 53745.40
@15% on all execpt ’A’
Say 6165.95
18.27.11 600 mm dia. pipe

Materials :-
Labour for laying
TOTAL 70344.81
TOTAL 71035.15
@l5%on all execpt ’A’
Say 8149.40
958
18.28 Providing lead caulked joints to spun iron or C.I. pipes and specials including
testing of joints but excluding the cost of pig lead :
Materials :-
1881 Spun yarn 0.17x 10 =1.70 kg. Kilogram 1.70 30.00 51.00
9999 Sundries L.S. 6.76 1.00 6.76
Labour-
0116 Fitter Day 1.00 151.50 151.50
0 117 Asstt. Fitter Day 1.00 141.60 141.60
0114 Beldar Day 2.00 135.25 270.50
TOTAL 708.11
TOTAL 715.19
Cost for one joint 82.25
Say 82.25

Materials :-
1881 Spun yarn 0.20x10=2.00 kg. kilogram 2.00 30.00 60.00
0771 Kersosene oil L.S. 9.49 1.00 9.49
9999 Sundries L.S. 9.49 1.00 9.49
9999 Carriage of materials
Labour-
0116 Fitter Day 1.50 151.50 227.25
0117 Asstt. Fitter Day 1.50 141.60 212.40
0114 Beldar Day 3.00 135.25 405.75
TOTAL 1036.87
TOTAL 1047.24
Say 120.45
Materials :-
959

1881 Spun yarn 0.23x10=2.30 kg, kilogram 2.30 30.00 69.00
0761 Fuel Wood quintal 0.42 265.00 111.30
9999 Sundries L.S. 10.79 1.00 10.79
Labour-
0116 Fitter Day 1.50 151.50 227.25
0117 Asstt. Fitter Day 1.50 141.60 212.40
0114 Beldar Day 3.00 135.25 405.75
TOTAL 1061.72
TOTAL 1072.34
Say 123.30
Materials :-
9999 Sundries L.S. 13.52 1.00 13.52
Labour
0116 Fitter Day 2.00 151.50 303.00
0117 Asstt. Fitter Day 2.00 141.60 283.20
0114 Beldar Day 4.00 135.25 541.00
TOTAL 1407.08
TOTAL 1421.15
Say 163.45

Materials :-
01881 Spun yarn 0.4x10=4 00 kg. Kilogram 4.00 30.00 120.00
9999 Sundries L.S. 17.55 1.00 17.55
960
Labour-
0116 Fitter Day 2.50 151.50 378.75
0117 Asstt. Fitter Day 2.50 141.60 354.00
0114 Beldar Day 5.00 135.25 676.25
TOTAL 1758.01
TOTAL 1775.59
Say 204.20
Materials :-
1881 Spun yarn 0.54x10 =5.40 kg kilogram 5.40 30.00 162.00
9999 Sundries L.S. 20.28 1.00 20.28
Labour-
0116 Fitter Day 3.00 151.50 454.50
0117 Asstt. Fitter Day 3.00 141.60 424.80
0114 Beldar Day 6.00 135.25 811.50
TOTAL 2120.99
TOTAL 2142.20
Say 246.35

Materials :-
1881 Spun yarn 0.62x10=6.20 kg kilogram 6.20 30.00 186.00
0 771 Kerosene oil litre 1.70 19.00 32.30
9999 Sundries L.S. 24.18 1.00 24.18
Labour-
0116 Fitter Day 3. oo 151.50 454.50
0117 Asstt. Fitter Day 3.00 141.60 424.80
0114 Beldar Day 6.00 135.25 811.50
TOTAL 2 203.91
961

TOTAL 2225.95
Say 256.00
Materials :-
1881 Spun yarn 0.74x10=7.40 kg kilogram 7.40 30.00 222.00
9999 Sundries L.S. 26.91 1.00 26.91
Labour-
0116 Fitter Day 4.00 151.50 606.60
0117 Asstt. Fitter Day 4.00 141.60 566.40
0114 Beldar Day 8.00 135.25 1082.00
TOTAL 2859.32
TOTAL 2887.91
Say 332.10

Materials :-
9999 Sundries L.S. 31.07 1.00 31.07
Labour-
0116 Fitter Day 4.50 151.50 681.75
0117 Asstt. Fitter Day 4.50 141.60 637.20
0114 Beldar Day 9.00 135.25 1217.25
TOTAL 3199.12
TOTAL 3231.11
Say 371.60
962

Materials:-
1881 Sgun yarn 0.85x10=8.50 kg. Kilogram 8.50 30.00 255.00
9999 Sundries L.S. 33.67 1.00 33.67
9999 Carriage of materials L.S 33.67 1.00 33.67
Labour-
0116 Fitter Day 4.75 151.50 719.62
0117 Asstt. Fitter Day 4.75 141.60 672.60
0114 Beldar Day 9.50 135.25 1284.88
TOTAL 3389.72
TOTAL 3423.62
Say 393.70

Materials :-
9999 Sundries L.S. 40.30 1.00 40.30
Labour-
0116 Fitter Day 6.50 151.50 984.75
0117 Asstt. Fitter Day 6.50 141.60 920.40
0114 Beldar Day 13.00 141.60 1 758.25
TOTAL 4 549.16
TOTAL 4 594.65
Cost for 10 joints 5 283.85
Say 528.40
963
18.29 Supplying pig lead at site of work.

materials-
1397 Lead Kilogram 100.00 58.00 5800.00
2341 Carrigae tonne 0.10 47.29 4.73
TOTAL 5804.73
TOTAL 5862.78
Cost of one quintal 6742.20
Say 6742.20
18.30 Providing flanged joints to double flanged C.I./ D.I. pipes and specials including
testing of joints :
Materials :-
1373 Rubber insertion 3mm thick each 10.00 9.00 90.00
1956 Bolts and nuts 16mm dia, 60 mmlong each 40.00 8.00 320.00
9999 Carriage of matonal L.S. 2.73 1.00 2.73
Labour-
0116 Fitter Day 0.15 151.50 22.72
0117 Asstt. Fitter Day 0.15 141.60 21.24
0114 Beldar Day 0.80 135.25 108.20
TOTAL 564.89
TOTAL 570.54
Say 65.60
testing of joints :
Materials :-
1956 Bolts and nuts 16mm dia, 60 mm long each 80.00 8.00 640.00
Labour-
0116 Fitter Day 0.25 151.50 37.88
0117 Asstt. Fitter Day 0.25 141.60 35.40
0114 Beldar Day 1.00 135.25 135.25
TOTAL 972.69
TOTAL 982.42
Say 113.00
964
testing of joints :

Materials:-
1375 Rubber insertion 3mrn thick each 10.00 13.00 130.00
1957 Bolts and nuts 16mm dia 65mm long each 80.00 8.00 640.00
Labour-
0116 Fitter Day 0.25 151.50 37.88
0117 Asstt. Fitter Day 0.25 141.60 35.40
0114 Beldar Day 1.00 135.25 135.25
TOTAL 982.69
TOTAL 992.52
Say 114.15
testing of joints:

Materials :-
1958 Bolts and nuts 20 mm dia, 65mm long each 80.00 12.00 960.00
Labour-
0116 Fitter Day 0.30 151.50 45.45
0117 Asstt. Fitter Day 0.30 141.60 42.48
0114 Beldar Day 1.10 135.25 148.78
TOTAL 1 350.87
TOTAL 1 364.38
Say 156.90
18.30 Providing flanged joints to double flanged C.l./ D.I pipes and specials including
testing of joints :

Materials :-
9999 Carrage of materials L.S. 0.30 1.00 4.16
Labour-
965
0116 Fitter Day 0.30 151.50 45.45

0117 Asstt. Fitter Day 0.30 141.60 42.48
0114 Beldar Day 1.10 135.25 148.78
TOTAL 1400.87
TOTAL 1414.88
Say 162.70
testing of joints

Materials :-
1378 Rubber insertign 3mm thick each 10.00 30.00 3000.00
Labour-
0116 Fitter Day 0.40 151.50 60.60
0117 Asstt. Fitter Day 0.40 141.60 56.64
0114 Beldar Day 1.30 135.25 175.82
TOTAL 2038.39
TOTAL 2058.77
Say 236.75
testing of joints :

Materials :-
1379 Rubber insertion 3mm thick each 10.00 38 00 380.00
9999 Carnage of materials L.S. 5.33 1.00 5.33
Labour-
0116 Fitter Day 0.40 151.50 60.60
0117 Asstt. Fitter Day 0.40 141.60 56.64
0114 Beldar Day 1.30 135.25 175.82
TOTAL 2 118.39
TOTAL 2 139.57
Say 246.05
966
testing of joints

Materials :-
1961 Bolts and nuts 20mm dia 80 mmlong each 160.00 13.00 2080.00
Labour-
0116 Fitter Day 0.50 151.50 75.75
0117 Asstt. Fitter Day 0.50 141.60 70.80
0114 Beldar Day 1.50 135.25 202.88
TOTAL 2 884.76
TOTAL 2 913.61
Say 335.05
testing of joints

Materials :-
Labour-
0116 Fitter Day 0.50 151.50 75.75
0117 Asstt. Fitter Day 0.50 141.60 70.80
0114 Beldar Day 1.50 135.25 202.88
TOTAL 4857.49
TOTAL 4906.06
Say 564.20
testing of joints :

Materials :-
9999 Crriage of materials L.S. 8.06 1.00 8.06
Labour-
967
0116 Fitter Day 0.60 151.50 90.90

0117 Asstt. Fitter Day 0.60 141.60 84.96
0114 Beldar Day 1.75 135.25 229.92
TOTAL 6 043.84
TOTAL 6 104.28
Say 702.00
testing of joints :

Materials :-
1383 Rubber insertion 3 mm thick each 10.00 106.00 1060.00
Labour-
0116 Fitter Day 0.65 151.50 98.48
0117 Asstt. Fitter Day 0.65 141.60 92.04
0114 Beldar Day 1.80 135.25 243.45
TOTAL 6702.03
TOTAL 6769.05
Say 778.45
testing of joints

Materials :-
1964 Bolds and nuts 20mm dia 75mm long each 200.00 30.00 6000.00
Labour-
0116 Fitter Day 0.75 151.50 113.62
0 117 Asstt. Fitter Day 0.75 141.60 106.20
0114 Beldar Day 2.00 135.25 270.50
TOTAL 7679.81
TOTAL 7756.61
Say 892.00
968
18.31 Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber
insertions etc. (the tail pieces if required will be paid separately):
18.31.1.1 Class I

Details of cost for 10 sluice valves
Materials :-
1940 100mm dia. sluice valves (with cap) each 10.00 1 890.00 18 900.00
Carriage pf sluice valves
2309 wt.= 44.3x10=443kg= 0.443t. say 0.44t tonne 0.44 47.29 20.81
Labour for laying sluice valve
(A) (Rate as per item No. 18.24) quintal 4.43 100.25 444.11
Providing flanged joints to sluice valves with
bolts, nuts and rubber insertion etc.
(A) (Rate as per item No.18.30.2 each 20.00 113.00 2 260.00
TOTAL 21 624.92
Add for water charges @ 1% on all except ‘A’ 189.21
TOTAL 21 814.13
Cost of 10 valves 24 680.63
Cost of 1 valve 2 468.06
Say 2 468.05
18.31.1.2 Class II

Materials :-
3311 100mm dia. sluice.valves (wiith cap) each 10.00 1950.00 19500.00
Carriage of sluice valves
2309 wt.= 56.3x10=563kg = 0.563 t. say 0.56t tonne 0..56 47.29 26.48
(A) (Rate as per item No.18.30.2) each 20.00 113.00 2260.00
TOTAL 22350.89
TOTAL 22546.15
Cost of 10 valves 25504.41
Cost of 1 valve 2550.44
Say 2550.45
969
18.31.2.1 Class I

Materials :-
1941 125mm dia. sluice valves (with cap) each 10.00 2365.00 23650.00
2309 wt. = 56.3x10= 563kg = 0.563t.say 0.56t tonne 0.56 47.29 26.48
TOTAL 26523.89
TOTAL 26760.65
Say 3034.75
18.31.2.2 Class II

Materials:-
2309 Carriage of sluice valve
wt.= 68.3x10 = 683 kg = 0.638 t say o.68 tonne tonne 0.68 47.29 32.16
TOTAL 27649.87
TOTAL 27896.69
Add l5% for contractor’s profit and overheads 3739.35
Say 3163.60
970
18.31.3.1 Class I

Materials :-
1942 150mm dia sluice valves (with cap) each 10.00 2840.00 28400.00
2309 wt. =72.5x10=725kg=0.725t.say 0.72t tonne 0.72 47.29 34.05
(A) (Rate as per item No.18.24) quintal 7.25 100.25 726.81
(A) (Rate as per item No 18.30.4) each 20.00 156.90 3138.00
TOTAL 32298.86
Add for water charges @ 1% on all except ‘B’ 284.34
TOTAL 32583.20
on all except ‘B’
Say 3689.10
18.31.3.2 Class II

Materials :-
2309 wt.= 86.5x10=865kg =0.865t. say 0.865t tonne 0.865 47.29 40.91
(A) (Rate as per item No.18.30.4) each 20.00 156.90 3 138.00
TOTAL 34 046.07
TOTAL 34 346.48
Say 3 889.75
971
18.31.4.1 Class I

Materials :-
1943 200mm dia,sluice valves (with cap) each 10.00 5405.00 54050.00
TOTAL 58579.73
TOTAL 59120.81
Say 6731.80
18.31.4.2 Class II

Materials :-
3320 200mm dia. sluice .valves (with cap) each 10.00 5 800.00 58 000.00
2309 wt.= 150.5x10=1505kg=1.505t. say 1.5t tonne 1.50 47.29 70.94
(A) (Rate as per item No. 18.24) quintal 15.05 100.25 1 508.76
TOTAL 62 833.70
TOTAL 63 414.41
Say 7 221.20
972
18.31.5.1 Class I

Materials :-
TOTAL 87123.62
TOTAL 87929.47
Say 10013.80
18.31.5.2 Class II

Materials :-
2309 wt. =229.9x10=2299kg =2299t. say 2.30t tonne 2.30 47.29 108.77
TOTAL 89 148.52
TOTAL 89 969.61
Say 10 240.90
973
18.31.6.1 Class 1

Materials :-
1945 300mm dia sluice valves (with cap) each 10.00 9920.00 99200.00
2309 wt.= 242.4x10=2424kg = 2.42t. say 2.42t tonne 2.42 47.29 114.44
TOTAL 106665.50
Add for water charges @ I % on all except ‘A’ 993.14
TOTAL 107658.64
Say 12270.50
18.31.6.2 Class II

Materials :-
3326 300mm dia. sluice, valves (with cap) each 10.00 10 250.00 102 500.00
2309 wt.= 303.4x10=3034kg=3.304t. tonne 3.034 47.29 143.48
TOTAL 110 606.06
Add for water charges @ 1% on all except ‘A’ 1 026.43
TOTAL 111 632.49
Say 12 718.30
974
18.32 Constructing masonry Chamber 30x30x50 cm, inside with 75 class designation
brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I.
surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete
slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal
size ) necessary excavation foundation concrete 1:5:10 ( 1 cement :5 fine sand:10
graded stone aggregate 40mm nominal size ) and inside plastering with cement
mortar 1:3 (1 cement :3 coarse sand) 12mm thick finished with a floating coat of
neat cement complete as per standard design :
18.32.1 With F.P.S. bricks
Details of cost for one chamber

Materials :-
(i) Earth work in excavation including refilling
and disposal of surplus earth
0.68x0.68x0.65m=0.301cum.
(Rate as per item No. 2.8.1) cum 0.30 103.40 31.02
(Rate as per item No. 2.25) cum 0.30 45.70 13.71
(ii) Cement concrete 1:5:10 (1 Cement: 5 fine
nominal size)
0.68x0.68x0.075m=0.035cum. Say 0.04 cum.
(Rate as per item No.4.1.11) cum 0.04 2 079.60 83.18
(iii) Second class brick work in cement mortar
1:4 (1 Cement: 4 coarse sand) in foundations
and plinth
1.66mx0.115x0.50m=0.095cum. Say 0.10
cum.
(Rate as per item no 6.1.1 of SH : Brick Work) cum 0.10 2 293.40 229.34
(iv) 12mm cement plaster 1:3 (1 Cement: 3
Coarse sand) finished with a floating coat of
neat cement.
1.20x0.50=0.60sqm.
0.30x0.30=0.09sqm.
=0.69sqm. Say 0.70sqm.
(Rate as per item no .13.9.1) sqm 0.70 112.80 78.96
1304 (A) (v) C.I. surface box with hinged cover each 1.00 72.00 72.00
100x100x75mm (inside)
9999 (A) (vi) Carriage of C.I. surface box L.S. 1.43 1.00 1.43
(vii) Cement concrete 1:2:4 (1 Cement: 2
Coarse sand ; 4 graded stone aggregate 20mm
nominal size)
in slab = 0.53mx0.53mx0.075m = 0.02107cum.
Less surface box 0.112x0.112x0.076
=(-)0.00094 cum.
= 0.0201 cum. Say 0.02cum.
(Rate as per item No.5.3) cum 0.02 3 673.85 73.48
(A) (viii) Sundries L.S. 4.16 1.00 4.16
TOTAL 587.28
(B) Add for water charges @ 1 % on ‘A 0.78
TOTAL 588.06
on (A + B)
Cost of one chamber 599.82
Say 599.80
975
18.33 Constructing masonry Chamber 60x60x75 cm, inside with 75 class designation brick
work in cement mortar 1:4 (1 cement :4coarse sand) for sluice valve, with C.I. surface
box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with
chained lid and RCC top slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone
aggregate 20mm nominal size ) necessary excavation7foundation concrete 1:5:10
(1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside
plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished
with a floating coat of neat cement complete as per standard design :
Materials :-
1.21 x 1.21 x 1.00m= 1.464cum.
(Rate as per item No.2.25) cum 1.46 45.70 66.72
nominal size)
1.21xl.21x0.1m=0.146cum. Say 0.15 cum.
1: 4(1 Cement: 4coarse sand) in foundations
and plinth
3.32mx0.23mx0.75m=0.573cum. Say 0.57
cum.
(Rate as per item no 6.1.1) cum 0.57 2 293.40 1 307.24
neat cement.
2.40x0.75=1.80sqm
0.60x0.60=0.36sqm.
=2.16sqm.
(Rate as per item no. 13.9.1) sqm 2.16 112.80 243.65
1305 (A) (v) C.I. surface box with hinged cover each 1.00 140.00 140.00
100x100x75mm (inside)
nominal size)
in slab = 1.06mx1.06mx0.15m = 0.1685 cum.
Less surface box 3.142/4xd2xO. 18m -
0.7854x0.156mx0.156mx0.18 = (-)0.0034
cum = 0.1651 cum. Say 0.17 cum.
(viii) Mild steel reinforcement for RCC work
etc.
0.165cum.x80kg/cum. = 13.2kg.
(Rate as per item No.5.22.1 kg 13.20 41.50 547.80
(ix) Form work 0.60mx0.60m=0.36sqm.+
3.32mx0.15m=0.50sqm.
= 0.86 sqm.
(Rate as per item No.5.9.3) sqm 0.86 187.35 161.12
9999 (A) (x) Sundries L.S. 8.06 1.00 8.06
TOTAL 3 570.10
(B) Add for water charges @ 1 % on (A) 1.56
TOTAL 3 571.66
Add 1 15% for contractor’s profit and overheads 23.65
on (A+B)
Cost of one chamber 3 595.31
Say 3 595.30
976
18.34: Constructing masonry Chamber 90x90x100 cm, inside with 75 class designation
brick work in cement mortar 1:4(1 cement: 4 corase sand ) for sluice valve, with C.I.
surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside)
with chained lid and RCC top slab 1:2:4 mix (1 cement: 2 coarse sand : 4"graded
stone aggregate 20 mm nominal size ) necessary excavation foundation concrete
1:5:10 (1 cement: 5 fine sand:10 graded stone aggregate 40 mm nominal size ) and
inside plastering with cement mortar 1:3(1 cement: 3 coarse sand) 12 mm thick
finished with a floating coat of neat cement complete as per standard design :
18.34.1: With F.P.S. bricks
Materials :-
1.51X1.51X1.25M
(Rate as per item No.2.25 cum 2.85 45.70 130.24
(ii) Cement concrete 1:5:10(1 Cement: 5 fine
nominal size)
1.51x1.51x0.lm=0.228cum. Say 0.23 cum.
1:4 (1 Cement: 4coarse sand) in foundations
and plinth
4.52mxO.23mx 1.00m= 1.04cum.
Rate as per item no 6.1.1 of SH : Brick Work cum 1.04 2 293.40 2 385.14
neat cement.
3.60mxl.00m=3.60sqm.
0.90mx0.90m=0.81sqm.
=4.41 sqm.
1305 (A) (v) C.I. surface box with chained lid. each 1.00 140.00 140.00
nominal size)
in slab = 1.36mx 1.36mx0.15m = 0.2774 cum.
Less surface box
0.7854x0.156mxO. 156mx0.18m = (-)0.0034
cum.
= 0.2740 cum. Say 0.27 cum.
etc.
0.274cum.x80kg/cum. = 21.92 kg.
(Rate as per item No.5.22.1) kg 21.92 41.50 909.68
4.52mxO.15m = 0.68 sqm.
= 1.49 sqm.
9999 (A) (x) Sundries L.S. 8.06 1.00 8.06
TOTAL 6 122.72
TOTAL 6 124.28
on (A+B)
Cost of one manhole 6 147.93
Say 6 147.95
977
18.35 : Constructing masonry Chamber 120x120x100 cm, inside with 75 class designation
brick work in cement mortar 1:4( cement :4 coarse) for sluice valve, with C.I. surface
box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with
chained lid and RCC top slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone
aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10(1
cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside
plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished
with a floating coat of neat cement complete as per standard design :
Materials :-
1.81X1.81X1.25M
(Rate as per item No 2.25) cum 4.10 45.70 187.37
nominal size)
1.81xl.81x0.1m=0.328cum. Say 0.33 cum.
1:4 (1 Cement: 4coarse sand) in foundations
and plinth
5.72mx0.23mxl.00m=1.316cum. Say 1.32
cum.
Rate as per item no 6.1.1 of SH : Brick Work cum 1.32 2293.40 3027.29
neat cement.
4.80mxl.00m=4.80sqm.
1.20mxl.20m=1.44sqm. =6.42sqm.
nominal size)
in slab = 1.66mx 1.66mxO. 15m = 0.4133 cum.
Less surface box
0.7854x0.156mx0.156mxO. 18m = (-)0.0034
cum.
= 0.4099 cum. Say 0.41 cum.
(viii) Mild steel reinforcement for RCC slab
steel @ 80kg/cum.
0.41cum.x80kg/cum. = 32.80kg.
(ix) Form work 1.20mxl.20m=1.44sqm.+
5.72mx0.15m=0.86sqm.
= 2.30sqm.
187.35
9999 (A) (x) Sundries sqm 8.06 1.00 8.06
TOTAL 8503.55
(B) Add for water charges @ 1% on (A) 1.56
TOTAL 8505.11
on(A+B)
Cost of one manhole 8528.76
Say 8528.75
978
brick work in cement mortar 1:4(1 cement : 4 coarse sand) for fire hydrants, with
C.I. surface box 350x350 mm. top and 165 mm deep ( inside) with chained lid and
RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20
mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement: 5
fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering
with cement mortar 1:3 (1 cement: 3 coarse sand) 12 mm thick finished with a
floating coat of neat cement complete as per standard design :
Materials :-
1.21X1.21X1.00M =1.464 cum say 1.46cum
nominal size)
1.21xl.21x0.1m=0.146cum. Say 0.15 cum.
and plinth
3.32mx0.23mx0.75m=0.573cum. Say 0.57
cum.
(Rate as per item no 6.1.1 ) cum 0.57 2 293.40 1 307.24
neat cement.
2.40mx0.75m=1.80sqm.
0.90mx0.90m=0.36sqm.
=2.16sqm.
(Rate as per item no. 13.9) sqm 2.16 112.80 243.65
nominal size)
in slab = 1.06mxl.06mx0.15m = 0.1685 cum.
Less surface box 0.61x0.41mx0.15m=
(-)0.0375 cum.
= 0.131 cum. Say 0.13 cum.
etc.
0.131cumx80kg/cum. = 10.48kg.
3.32mxO.15m = 0.50 sqm.
=0.86 sqm.
9999 (A) (x) Sundries L.S. 8.06 1.00 8.06
TOTAL 3 356.03
TOTAL 3 358.05
on (A+B)
Say 3 388.65
979
brick work in cement mortar 1:4(1 cement : 4 coarse sand) for water meter complete
with C.I. double flap surface box 400x200x200 mm (inside) with locking arrangement
and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate
20 mm nominal size) necessary excavation foundation concrete 1:5:10 ( 1 cement:
5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering
with cement mortar 1:3 (1 cement: 3 coarse sand) 12 mm thick finished with a
Details of cost for one chamber.
Materials:-
1.21X1.06X0.85m = 1.09 cum
(Rate as per item No.2.25 cum 1.09 45.70 49.81
nominal size)
1.21 x 1.06x0. lm=0.128cum. Say 0.13 cum.
and plinth
3.02mx0.23mx0.50m=0.347cum. Say 0.35
cum.
(Rate as per item no 6.1.1 of SH : Brick Work) cum 0.35 2293.40 802.69
neat cement.
2.10mx0.50m=l .05sqm.
0.60mx0.45m=0.27sqm.
= 1.32sqm. (Rate as per item no.13.9) sqm 1.32 112.80 148.90
1307 (A) (v) C.I. surface box 400x200x200mm each 1.00 185.00 185.00
(inside) with locking arrangement
Coarse sand ; 4 graded stone aggregate
20 mmnominal size)
in slab = 1.06mx0.91mx0.25m = 0.241 cum.
Less surface box 0.42x0.22mx0.2m= (-)0.018
cum = 0.223 cum. Say 0.22 cum.
steel @ 80kg/cum.
0.223 cum.x80kg/cum. = 17.84 kg.
(Rate as per item No.5.22.1) Kg 17.84 41.50 740.36
3.02mx0.25m=0.76sqm.
= 1.03sqm. (Rate as per item No. 5.9.3) sqm 1.03 187.35 192.97
(A) (x) Sundries L.S 8.06 1.00 8.06
TOTAL 3332.62
TOTAL 3334.69
on(A+B)
Cost of one manhole 3365.99
Say 3366.00
980
18.38 : Painting G.I. pipes and fittings with synthetic enamel white paint over a ready
mixed priming coat, both of approved quality for new work :
18.38.1: 15 mm diameter pipe. -—
Perimeter = 0.0673 metre
Area10x0.0673rn = 0.673sqm.
Priming Coat
Rate as per item No. 13.50.3 of SH: sqm 0.673 12.65 8.51
Finishing)
Painting two coats excluding priming coat
with white paint on new work.
(Rate as per item No. 13.6.1) sqm 0.673 33.25 22.38
9999 (A) Add for delay L.S. 13.52 1.00 13.52
TOTAL 44.41
TOTAL 44.55
on (A+B)
Say 4.65
18.38.2: 20 mm diameter pipe.
Area = 10x0.0845 sqm. = 0.845 sqm.
Priming Coat
(Rate as per item No. 13.50.3 of SH sqm 0.845 12.65 10.69
Finishing)
(Rate as per item No.l3.61.1) sqm 0.845 33.25 28.10
9999 (A) Add for delay L.S. 13.52 1.00 13.52
TOTAL 52.31
TOTAL 52.45
on (A+B)
Say 5.45
18.38: Painting G.I. pipes and fittings with synthetic enamel white paint over a ready
18.38.3 : 25 mm diameter pipe.

Area= 10x0.1061 sqm. = 1.061 sqm
Priming coat
981

(Rate as per item No. 13.6I.1 of S.H. sqm 1.061 33.25 35.28
finishing)
9999 (A) Add for delay L.S. 20.28 1.00 20.28
TOTAL 68.98
TOTAL 69.18
on (A+B)
Say 7.20
Area = 10x0.1334 sqm. = 1.334 sqm.
Priming Coat
Rate as per item No.13.50.3 of SH : sqm 1.334 12.65 16.88
Finishing)
(Rate as per item No.13.61.l of S.H. sqm 1.334 33.25 44.36
finishing)
9999 (A) Add for delay L.S. 20.28 1.00 20.28
TOTAL 81.52
TOTAL 81.72
on(A+B)
Say 8.50
Area = 10x0.1520 sqm.= 1.520 sqm.
Priming Coat
(Rate as per item No.l3.50.3 of SH : sqm 1.52 12.65 19.23
Finishing)
(Rate as per item No.l3..61.1 of S.H. sqm 1.52 33.25 50.54
finishing)
982

9999 (A) Add for delay L.S. 26.91 1.00 26.91
TOTAL 96.98
TOTAL 96.95
on (A+B)
Say 10.10
Area= 10x0.1894 sqm. = 1.894 sqm.
Priming Coat
(Rate as per item No. 13.50.3 of SH : sqm 1.894 12.65 23.96
Finishing)
(Rate as per item No.l3.61.l of S.H. sqm 1.894 33.25 62.98
finishing)
9999 (A) Add for delay L.S. 26.91 1.00 26.91
TOTAL 113.85
TOTAL 114.12
on (A+B)
Say 11.80
18.39 : Repainting G.I. pipes and fittings with synthetic enamel white paint of approved
quality :
Painting one coat with white paint on old
work.
9999 (A) Add for delay L.S. 8.06 1.00 8.06
TOTAL 0.08
TOTAL 1.22
Add 15% for contractor’s profit and overheads
on (A+B)
Say 2.45
983
quality :
work.
(Rate as per item No.14.54.1 of sqm 0.845 22.85 19.31
S.H.Repair to Bldg)
9999 (A) Add for delay L.S. 8.06 1.00 8.06
TOTAL 27.37
TOTAL 27.45
Add 1 5% for contractor’s profit and overheads 1.22
on (A+B)
Say 2.85
18.39 Repainting G.I. pipes and fittings with synthetic enamel white paint of approved quality :
Works
S.H.Repair to Bldg)
9999 (A) Add for delay L.S. 10.79 1.00 10.79
TOTAL 35.03
TOTAL 35.14
on (A+B)
Say 3.70
quality :
18.39.4 : 32 mm diameter pipe
work.
(Rate as per item No. 14.54.1 of sqm 1.334 22.85 30.48
S.H.Repair to Bldg)
9999 (A) Add for delay L.S. 10.92 1.00 10.92
TOTAL 41.40
TOTAL 41.51
on (A+B)
Say 4.30
984
quality :
18.39.5: 40 mm diameter pipe
work.
(Rate as per item No. 14.93.2 of sqm 1.52 22.85 34.73
S.H. Repair to.Bldg)
9999 (A) Add for delay L.S. 13.52 1.00 13.52
TOTAL 48.25
TOTAL 48.39
on (A+B)
Say 5.05
quality :
work.
S.H. Repair to.Bldg)
9999 (A) Add for delay L.S. 13.52 1.00 13.52
TOTAL 56.80
TOTAL 56.94
on (A+B)
Say 5.90
18.40 : Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of
approved quality :
Painting with anti-corrosive paint two coats.
(Rate as per item13.65.1 sub-head sqm 0.673 24.80 16.69
finishing)
9999 (A) Add for delay L.S. 8.06 1.00 8.06
TOTAL 24.75
TOTAL 24.83
on (A+B)
Say 2.60
985
approved quality
(Rate as per item No. 13.65.1 sub-head sqm 0.845 24.80 20.96
finishing)
9999 (A) Add for delay L.S. 8.06 1.00 8.06
TOTAL 29.02
TOTAL 29.10
on (A+B)
Say 3.05
18.40: Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of
approved quality
(Rate as per item No.13.65.1 sub-head sqm 1.061 24.80 23.31
finishing)
9999 (A) Add for delay L.S. 10.79 1.00 10.79
TOTAL 37.10
TOTAL 37.21
on (A+B)
Say 3.90
approved quality :
(Rate as per item No. 13.65.1 sub-head sqm 1.334 24.80 33.08
finishing)
9999 (A) Add for delay L.S. 10.79 1.00 10.79
TOTAL 49.87
TOTAL 43.98
on (A+B)
Say 4.55
986
18.40 : Painting G.I. pipes and fittings with two coats of anti -corrosive bitumastic paint
of approved quality:
(Rate as per item No. 13.65.1 sub-heads sqm 1.52 24.80 37.70
finishing)
9999 (A) Add for delay L.S. 12.22 1.00 12.22
TOTAL 49.92
TOTAL 50.04
on (A+B)
Say 5.20
18.40: Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of
approved quality :
finishing)
9999 (A) Add for delay L.S. 12.22 1.00 12.22
TOTAL 59.19
TOTAL 59.31
on (A+B)
Say 6.10
approved quality :
finishing)
9999 (A) Add for delay L.S. 13.52 1.00 13.52
TOTAL 72.72
TOTAL 72.86
on (A+B)
Say 7.50
987
approved quality :
finishing)
9999 (A) Add for delay L.S. 14.82 1.00 14.82
TOTAL 84.16
TOTAL 84.31
on (A+B)
Say 8.65
18.41 : Providing and filling sand grading zone V or coarser grade alround the G.I. pipes
in external work.
18.41.1: 15mm diameter pipe
Details of cost for 1 cum sand
Materials
6501 Fine sand cum 1.00 175.00 175.00
Labour
0114 Belders Day 0.09 135.25 12.17
0115 Coolies Day 0.11 135.25 14.88
Total 255.26
Add for water charges @1% 2.55
Total 257.81
Add for contractor profit and overhead @15% 38.61
(A) Cost for 1cum 296.48
Details of cost of sand filling alround 15mm
dia. pipe 10 metre long.
Width of sand filling = 300mm
Depth of sand filling under the pipe=75mm+
Above the pipe = 150mm+
Max. external dia of pipe = 21.8mm
= 246.8mm say 247mm
Quantity of sand = 10x0.30x0.247 = 0.744'
cum.
Less for pipe = 3.142/4(0.0218)2x10 = (-)0.004 cum.
= 0.74 cum.
Cost of sand filling for 10 metre pipe
Rate as in Item No 18.41.1 marked (A) cum 0.74 296.48 219.40
TOTAL 219.40
Say 21.95
988
18.41: Providing and filling sand of grading zone V or coarser grade alround the G.I.
pipes in external work.
= 252.3 Say 252mm
Quantity of sand = 10x0.30x0.252 = 0.756
cum.
Less for pipe =3.142/4(0.0273)2 x10 =
(-)0.006cum.
= 0.750 cum
Rate as in Item No.18.41.1.marked (A) cum 0.75 296.48 222.36
TOTAL 222.36
Say 22.25
18.41 Providing and filling sand of grading zone V or coarser grade alround the G.I.
Depth of sand filling under the pipe=75mm
Above the pipe = 150mm
= 259.2 Say 259mm
cum.
Less for pipe 3.142/4 (0.0342)2 x 10 =
(-)0.009cum.
= 0.768 Say 0.77 cum.
TOTAL 228.29
Say 22.85
18.41 ; Providing and filling sand of grading zone V or coarser grade alround the G.I.
989

= 267.9 Say 268mm
Quantity of sand =0x0.30x0.268 =0.804 cum
Less for pipe 3.142/4(0.0429)2x 10
= (-)0.014cum.
= 0.790 Say 0.79 cum.
TOTAL 234.22
Say 23.40
= 273.8 Say 274mm
Quantity of sand = 10x0.30x0.274 = 0.82cum
Less for pipe 3.142/4(0.0488)2x10
(-)0.014cum.
= 0.801 Say 0.80 cum.’
TOTAL 237.18
Say 23.70
Above the pipe =150mm+
= 285.8 Say 286mm
Quantity of sand =10x0.30x0.286 =0.858 cum
Less for pipe 3.142/4(0.0608)2xl0 =
(-)0.029cum.
= 0.829 Say 0.83 cum.
Rate as in Item No 18.41.1 = marked (A) cum 0.83 296.48 246.08
TOTAL 246.08
Say 24.60
990
= 301.6 Say 302mm
Quantity of sand =10x0.45x0.302 =1.359cum
Less for pipe 3.142/4(0.0766)2x10 =
(-)0.046cum.
= 1.313 Say 1.31 cum.
TOTAL 388.39
Say 38.85
= 314.9 Say 315mm
Quantity of sand = 10x0.45x0.315= 1.418
cum.+
Less for pipe 3.142/4(0.0899)2x10 =
(-)0.0640cum.
= 1.354 Say 1.35 cum.
TOTAL 400.25
Say 40.00
18.41 : Providing and filling sand of grading zone V or coarser gradealround the G.I.
991
Max. external dia of pipe = 115mm

= 340mm
Quantity of sand = 10x0.45x0.34 = 1.53 cum.+
Less for pipe 3.142/4(0.115)2x10
= (-)0.10 cum.
= 1.43 cum.
TOTAL 423.97
Say 42.40
18.41.10:150 mm diameter pipe
Depth of sand filling under the pipe 75mm+
= 391.50mm Say 0.392m
cum.+
Less for pipe 3.142/4(0.167)2x10 =
(-)0.22cum.
= 2.13 cum.
Rate as in Item No 18.41.1marked (A) cum 2.13 296.48 631.50
TOTAL 631.50
Say 63.15
18.42: Boring with 100 mm diameter casing pipe for hand pump/ tube well in all soils
except ordinary hard rocks requiring blasting including removing the casing pipe
after the hand pipe/tube well is lowered and tested :
18.42.1: Upto 6 metres depth.
Labour
For boring and removing the pipe-
0116 Fitter Day 0.50 151.50 75.75
0114 Beldar Day 3.00 135.25 405.75
0010 Hire charges for derick monkey rope and other Day 0.50 500.00 250.00
accessories
1472 Depreciation @ 2% of the cost of casing pipe metre 0.12 292.00 35.04
6metre @ Rs. per metre
9999 Sundries L.S. 13.52 1.00 13.52
TOTAL 780.06
TOTAL 787.86
992
Add for contractor’s profit and over head @ 118.18

15%
Say 151.00
18.42 : Boring with 100 mm diameter casing pipe for hand pump/ tube well in all soils
18.42.2: Beyond 6m and upto 12 m depth.
Labour
0116 Fitter Day 0.62 151.50 93.93
0114 Beldar Day 3.50 135.25 473.38
accessories
9999 Sundries L.S. 13.52 1.00 13.52
TOTAL 925.87
TOTAL 935.13
Add 15% for contractor’s profit and over head 140.27
Say 179.25
18.42: Boring with 100 mm diameter casing pipe for hand pump/ tube well in all soils
18.42.3 : Beyond 12 m and upto 18 m depth.
Labour
0116 Fitter Day 0.75 151.50 113.62
0114 Beldar Day 4.00 135.25 541.00
accessories
9999 Sundries L.S. 13.52 1.00 13.52
TOTAL 1 078.18
TOTAL 1 088.96
15%
Cost of 6 metre 1 252.30
Say 208.70
993
18.43 : Providing and placing in position filters of 40 mm diameter G.I. pipe with brass
strainer of approved quality.
Details of cost for one strainer 1.5 long
Materials
1882 Cost of strainer 40mm diameter 1.5m long each 1.00 405.00 405.00
9999 Carriage to site L.S. 13.52 1.00 13.52
Labour:
0116 Fitter Day 0.17 151.50 25.76
0114 Beldar Day 0.17 151.50 22.99
9999 Sundreis including hamp white lead etc. L.S. 7.15 1.00 7.15
TOTAL 474.42
TOTAL 479.16
15%
Say 367.35
18.44: Providing and fixing to filter and lowering to proper levels 40 mm G.I. pipe for tube
well including cleaning and priming the tube well.
Details of cost for a depth of 10 metre
Materials:
1549 (A) 40mm G.I. pipe metre 10.20 160.00 1632.00
2271 (A) carriage of 40mm pipe(36.5kg) tonne 0.03723 47.49 1.76
Added 2% wastage and fitting in “A”
9999 White lead, hamp and oil etc. L.S. 6.76 1.00 6.76
0116 Fitter Day 0.33 151.50 50.00
0114 Beldar Day 0.75 135.25 101.44
9999 Sundries L S. 7.25 1.00 7.25
TOTAL 1 799.2
Add for water charges @ I % 17.99
TOTAL 1 817.20
15%
Say 209.00
18.45 : Providing and placing in position hand pump of approved quality for 40 mm diameter
G.I. pipe complete with all accessories.
Details of cost for one pump
Materials:
1693 Cost of hand pump each 1.0 450.00 450.00
9999 Carriage L.S. 13.52 1.00 13.52
Labour:
0116 Fitter Day 0.10 1581.50 15.15
0114 Beldar Day 0.10 135.25 13.52
9999 Sundries L.S. 4.42 1.00 4.42
TOTAL 469.61
TOTAL 501.58
15%
Cost for one hand pump 576.82
Say 576.80
994
18.46 : Providing and fixing G.I. Union in G.I. pipe including cutting and threading the
pipe and making long screws etc. complete (New work)
18.46.1: 15 mm nominal bore

Materials:
1641 15mm nominal bore . each 1.00 32.00 32.00
Labour:
0116 Fitter Day 0.11 151.50 16.66
0114 Beldar Day 0.11 135.25 14.88
TOTAL 65.36
TOTAL 66.01
Add 15% for contractor’s profit and over heads 9.90
Cost for each no. 75.91
Say 75.90
18.46: Providing and fixing G.I. Union in G.I. pipe including cutting and threading the
Materials:
1642 20mm nominal bore. each 1.00 50.00 50.00
Labour:
0116 Fitter Day 0.11 151.50 16.66
0114 Beldar Day 0.11 135.25 14.88
TOTAL 83.36
TOTAL 84.19
Add for contractor’s profit and over head @15% 12.63
Say 96.80

Materials:
1643 25mm nominal bore each 1.00 59.00 59.00
Labour:
0116 Fitter Day 0.11 151.50 16.66
0114 Beldar Day 0.11 135.25 14.88
TOTAL 92.36
TOTAL 93.28
Add for contractor’s profit and over head @15% 13.99
Say 107.25
995
18.46.4: 32 mm nominal
Materials:
Labour:
0116 Fitter Day 0.11 151.50 16.66
0114 Beldar Day 0.11 135.25 14.88
TOTAL 106.36
TOTAL 107.42
15%
Say 123.55
Material
Labour:
0116 Fitter Day 0.11 151.50 16.66
0114 Beldar Day 0.11 135.25 14.88
TOTAL 141.36
TOTAL 142.77
15%
Say 164.20
18.46.6: 50mm nominal bore
Materials:
1646 50mm nominal bore. each 1.0 158.00 158.00
Labour:
0116 Fitter Day 0.15 151.50 22.72
0114 Beldar Day 0.15 135.25 20.29
TOTAL 202.83
TOTAL 204.86
15%
Say 235.60
996
18.46.7: 65mm nominal bore
Materials:
1647 65m.m nominal bore each 1.00 324.00 324.00
Labours
0116 Fitter Day 0.15 151.50 22.72
0114 Beldar Day 0.15 135.25 20.29
TOTAL 368.83
TOTAL 372.52
15%
Say 428.40
Materials:
Labours
0116 Fitter Day 0.15 151.50 22.72
0114 Beldar Day 0.15 135.25 20.29
TOTAL 436.83
TOTAL 441.20
15%
Say 507.40
18.47 Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the
pipe and making long screws including excavation, refilling the earth or cutting of
wall and making good the same complete wherever required :
18.47.1: 15 mm nominal bore.
Materials:
Labours
0116 Fitter Day 0.33 151.50 50.00
0114 Beldar Day 0.33 135.25 44.63
TOTAL 128.45
TOTAL 129.73
15%
Say 149.20
997
Materials:
Labours
0116 Fitter Day 0.33 151.50 50.00
0114 Beldar Day 0.33 135.25 44.63
TOTAL 146.45
TOTAL 147.91
15%
Say 170.10
Materials:
1643 25mrn nominal each 1.00 59.00 59.00
Labours
0116 Fitter Day 0.33 151.50 50.00
0114 Beldar Day 0.33 135.25 44.63
TOTAL 155.45
TOTAL 157.00
15%
Say 180.55
Materials:
Labours
0116 Fitter Day 0.33 151.50 50.00
0114 Beldar Day 0.33 135.25 44.63
TOTAL 169.45
TOTAL 171.14
15%
Say 196.80
998

Materials:
1645 40 mm nominal bore each 1.00 108.00 108.00
9999 Carriage of material and sundries LS 1.82 1.00 1.82
Labour:
0116 Fitter Day 0.33 151.50 50.00
0114 Beldar Day 0.33 135.25 44.63
TOTAL 204.45
TOTAL 206.49
15%
Say 237.45

Materials:
Labour:
0116 Fitter Day 0.45 151.50 68.18
0114 Beldar Day 0.45 135.25 60.86
TOTAL 288.86
TOTAL 291.75
15%
Say 335.50

Materials:
Labour:
0116 Fitter Day 0.45 151.50 68.18
999
0114 Beldar Day 0.45 135.25 60.86
TOTAL 454.86
TOTAL 459.41
15%
Say 528.30

Materials:
Labour:
0116 Fitter Day 0.45 151.50 68.18
0114 Beldar Day 0.45 135.25 60.86
TOTAL 522.86
TOTAL 528.09
15%
Say 607.30
18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage
tank ISI : 12701 marked with cover and suitable locking arrangement and making
necessary holes for inlet, outlet and overflow pipes but without fittings and the
base support for tank
Details of cost for 500 litres, tank 1 no.

Materials:
1649 Polyethylene water storage tank per litre 500.00 4.00 2 000.00
9999 Carriage to site L.S. 179.40 1.00 179.40
9999 Placing at terrace L.S. 89.70 1.00 89.70
TOTAL 2 269.10
TOTAL 2 291.79
15%
Cost for 500 litre 2 635.56
Cost per litre 5.27
Say 5.25
1000
18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931

Materials:
7257 15mm diameter C.P. brass bib cock each 1.00 258.00 258.00
9999 Carriage of material and fixing changes LS 11.57 1.00 11.57
TOTAL 269.57
TOTAL 272.27
15%
Say 313.10
18.50 Providing and fixing C.P. brass long nose bib cock of approved quality conforming
to IS standards and weighing not less than 810 gms.
18.50.1 15mm nominal bore.

Materials:
7258 15mm diameter C.P. brass long nose bib cock each 1.00 220.00 220.00
TOTAL 236.25
TOTAL 235.61
15%
Say 274.40
18.51 Providing and fixing C.P. brass long body bib cock of approved quality conforming
to IS standards and weighing not less than 690 gms.

Materials:
7259 15mm diameter C.P. brass long body bib cock each 1.00 258.00 258.00
TOTAL 271.91
TOTAL 274.63
15%
Say 315.80
1001
18.52 Providing and fixing C.P. brass stop cock (concealed) of standard design and of
approved make conforming to IS:8931.

Materials:
7260 15mm diameter C.P. brass stop cock each 1.00 258.00 258.00
(Concealed)
9999 Carriage of material and fixing changes L.S. 11.57 1.00 11.57
TOTAL 269.57
TOTAL 272.27
15%
Say 313.10
18.53 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of
approved quality conforming to IS:8931

Materials:
7261 C.P. brass angle valve each 1.00 288.00 288.00
9999 Carriage and fixing changes L.S. 11.31 1.00 11.31
TOTAL 299.31
TOTAL 302.30
Add for contractor’s profit and over head@ 45.34
15%
Say 347.65
18.54 Providing and fixing PTMT bib cock of approved quality and colour.
18.54.1 15mm nominal bore, 86 mm long, weighing not less than 88 gms.

Materials:
7400 15mm dia P.T.M.T. bib cock each 1.00 96.00 96.00
TOTAL 104.06
TOTAL 105.10
15%
Say 120.85
1002
18.54.2 15 mm nominal bore, 122mm long, weighing not less than 99 gms.

Materials:
TOTAL 228.06
TOTAL 230.34
15%
Say 264.90
18.54.3 15 mm nominal bore, 165 mm long, weighing not less than 110 grams.

Materials:
TOTAL 163.06
TOTAL 164.69
15%
Say 189.40
18.54.4 15mm nominal bore, 90mm long, weighing not less than 93 grams.

Materials:
7859 15mm P.T.M.T. bib cock with nozzle. each 1.00 110.00 110.00
TOTAL 118.06
TOTAL 119.24
15%
Say 137.15
18.55 Providing and fixing PTMT stop cock of approved quality and colour.
18.55.1 15 mm nominal bore, 86mm long, weighing not less than 88 grams.

Materials:
7403 15mm dia P.T.M.T. stop cock each 1.00 96.00 96.00
1003
TOTAL 104.06
TOTAL 105.10
15%
Say 120.85

Materials:
7405 20 mm dia P.T.M.T. stop cock each 1.00 120.00 120.00
TOTAL 128.06
TOTAL 129.34
15%
Say 148.75
18.55.3 Concealed stop cock, 15mm nominal bore, 108mm long, weighing not less than 108 grams.

Materials:
7861 P.T.M.T. stop cock (concealed) 15 mm each 1.00 160.00 160.00
TOTAL 168.06
TOTAL 169.74
15%
Say 195.20
18.56 Providing and fixing PTMT pillar cock of approved quality and colour .

Materials:
7406 15mm dia P.T.M.T. pillar cock each 1.00 150.00 150.00
TOTAL 159.49
TOTAL 161.08
15%
Say 185.25
1004
18.56 Providing and fixing PTMT pillar cock of approved quality and colour .
18.56.2 15mm nominal bore, 125mm long foam flow, Weighing not less than 120 gms.

Materials:
7401 15mm dia P.T.M.T. bib cockwith flange (fancy) each 1.00 220.00 200.00
TOTAL 229.49
TOTAL 231.78
15%
Say 266.55
18.57 Providing and fixing PTMT, push cock of approved quality and colour.
18.57.1 15 mm nominal bore, 98mm long, Weighing not less than 75 gms.

Materials:
7407 15mm P.T.M.T. push cock each 1.00 90.00 90.00
TOTAL 98.06
TOTAL 99.04
15%
Say 113.90
18.57 Providing and fixing PTMT, push cock of approved quality and colour.
18.57.2 15 mm nominal bore, 80mm long, Weighing not less than 46 gms.

Materials:
7408 P.T.M.T. push cock 12mm dia 20 mm BSP each 1.00 75.00 75.00
TOTAL 83.06
TOTAL 83.89
Add for contractor’s profit and over head 12.58
15%
Say 96.45
1005
18.58 Providing and fixing PTMT grating of approved quality and colour.
18.58.1 Circular type.
18.58.1.1 100 mm nominal dia.

Materials:
7409 100mm dia P.T.M.T. grating each 1.00 30.00 30.00
TOTAL 34.16
TOTAL 34.50
15%
Say 39.70
18.58.1 Circular type.
18.58.1.2 125 mm nominal dia with 25 mm waste hole.

Materials:
7411 125mm dia P.T.M.T. grating each 1.00 36.00 36.00
TOTAL 40.16
TOTAL 40.56
15%
Say 46.65
18.58.2 Rectangular type with openable circular lid.
18.58.2.1 150 mm nominal size square 100 mm diameter of the inner hinged round grating.

Materials:
7412 150mm size square P.T.M.T. grating each 1.00 90.00 90.00
TOTAL 9416
TOTAL 95.10
15%
Say 109.35
1006
18.59 Providing and fixing C.I. double acting air valve of approved quality with bolts,
nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will be
paid separately):
18.59.1 50mm dia
Details of cost for 10 no. double acting air

valves
Materials:
7415 50mm dia, double acting air valve each 10.00 3 050.00 30 500.00
9999 Carriage of air valves L.S. 26.00 1.00 26.00
9999 Labour for faying double acting air valve L.S. 39.00 1.00 39.00
Providing flanged joints to double acting air
valves with bolts, nuts and rubber insertions
etc.
(A) (Rate as per item no 18.30.1 of SH : Water each 10.00 65.60 656.00
Supply)
TOTAL 31221.00
TOTAL 31 526.65
Add for contractor’s profit and over head @ 4 630.60
15% on all except ‘A’
Cost for 10 air valves 36 157.25
Say 3 615.70
paid separately):
18.59.2 80 mm dia

valves
Materials:
9999 Labour for faying double acting air valve L.S. 39.00 1.00 39.00
etc.
Supply)
TOTAL 45 521.00
TOTAL 45 969.65
Say 5 276.65
1007
paid separately):
18.59.3 100mm dia

valves
Materials:
9999 Labour for laying double acting air valve L.S. 52.00 1.00 52.00
etc.
(A) (Rate as per item no 18.30.2 of SH : Water each 10.00 113.00 1 130.00
Supply)
TOTAL 59 208.00
TOTAL 59 788.78
Say 6 858.75
18.60 Providing and fixing enclosed type water meter (bulk type) conforming to IS : 2373
and tested by Municipal Board complete with bolts, nuts, rubber insertions etc.
(The tail pieces if required will be paid separately):
Details of cost for one no. water meter

Materials:
7418 80mm dia. water meter each 1.00 1 800.00 1 800.00
9999 Testing charges L.S. 130.00 1.00 130.00
9999 Carriage of water meter L.S. 26.00 1.00 26.00
9999 Labour for faying water meter L.S. 39.00 1.00 39.00
etc.
Supply)
TOTAL 2 126.20
TOTAL 2 146.15
Cost for 1 water meter 2 448.39
Say 2 448.40
1008

Materials:
etc.
Supply)
TOTAL 3 234.00
TOTAL 3 264.08
Say 3 719.80
18.60 Providing and fixing enclosed type water meter (bulk type) conforming to IS :
2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions
etc. (The tail pieces if required will be paid separately):

valves
Materials:
7420 80mm dia. water meter each 1.00 4000.00 4000.00
etc.
Supply)
TOTAL 4573.80
TOTAL 4616.40
Cost for 1 water meter 5261.79
Say 5261.80
1009

Materials:
etc.
Supply)
TOTAL 5 137.40
TOTAL 5 185.52
Say 5 914.55
18.61 Providing and fixing C.I. dirt box strainer for bulk type water meter with nuts,
bolts, rubber insertions etc. complete conforming to IS : 2373 :
18.61.1 80 mm dia
Details of cost for one no. dirt box strainer

Materials:
7422 80mm dia. dirt box strainer each 1.00 2 500.00 2 500.00
9999 Carriage of dirt box strainer L.S. 26.00 1.00 26.00
9999 Labour for faying dirt box strainer L.S. 39.00 1.00 39.00
etc.
Supply)
TOTAL 2 696.20
TOTAL 2 721.85
Cost for 1 dirt box strainer 3 110.45
Say 3 110.45
1010
18.61.2 100mm dia.

Materials:
etc.
Supply)
TOTAL 4 054.00
TOTAL 4 092.28
Say 4 672.20
18.61.3 150 mm dia

Materials:
7424 150mm dia. dirt box strainer each 1.0 4850.00 4 850.00
etc.
Supply)
TOTAL 5 267.80
TOTAL 5 317.34
Say 6 067.85
18.61.4 200mm dia

Materials:
1011
etc.
(A) (Rate as per item no 18.30.5 of SH : Water each 2.00 162.70 325.40 (A)
Supply)
TOTAL 7 281.40
TOTAL 7 350.96
Say 8 404.80
18.62 Providing and fixing PTMT Ball cock of approved quality, colour and make complete
with Epoxy coated rod with L.P./ H.P.H.D. plastic ball.
18.62.1 15 mm nominal bore, 105mm long, weighing not less than 138gms.

Materials :
7495 P.T.M.T. ball cock 15 mm complete with each 1.00 121.00 121.00
aluminium rod & H.D. ball
Total 142.58
TOTAL 144.01
Cost or one no 165.61
Say 165.60
with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.

Materials :
Total 201.91
TOTAL 203.93
Say 234.50
with Epoxy coated aluminium rod with L.P./ H.P.H.D. plaitic ball.
1012

Materials :
Total 428.24
TOTAL 432.52
Say 497.40
with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.
18.62.4 40mm nominal bore, 206mm long, weighing not less than 690gms.

Materials:
7498 Ball Cock 40mm Complete with Epoxy Each 1.00 745.00 745.00
Coated Aluminium Road & H.D. Ball
TOTAL 777.24
TOTAL 785.01
Say 902.75
with Epoxy coated
18.62.5 50mm nominal bore, 242mm long, weighing not less than 1240gms.

Materials:
7499 Ball Cock 50mm Complete with Epoxy Each 1.00 1 120.00 1 120.00
Coated Aluminium Road & H.D. Ball
TOTAL 1 152.24
TOTAL 1 163.76
Cost of one no 1 338.32
Say 1 338.30
18.63 Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not
less than 85gms.

Materials :
7500 P.T.M.T. angle stop cock with flange each 1.0 120.00 120.00
1013
TOTAL 128.06
TOTAL 129.34
Say 148.75
18.64 Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not
less than 40gms.

Materials :
7501 Swiveling shower 15 mm each 81.00 1.00 81.00
TOTAL 87.76
TOTAL 88.64
Say 101.95
18.65 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth
102mm, height of 75mm with concealed fitting arrangements weighing not less
than 106 gms.

Materials :
7509 Soap Dish/Holder 138x102x75mm Each 108.00 1.00 108.00
TOTAL 114.76
TOTAL 115.91
Say 133.30
18.66 Providing and laying S&S C.I. Standard specials such as tees, bends, collars tapers
and caps etc, suitable for flanged jointing as per IS : 1538 :
18.66.1 Upto300mmdia

Materials :-
7708 Cost of specials quintal 1.00 3 530.00 3530.00
Labour
(A) For laying Rate as per item No. 18.24 quintal 1.00 100.25 100.25
TOTAL 3 634.98
TOTAL 3 670.33
Cost of 1 quintal 4 205.84
Say 4 205.85
1014
18.66 Providing and laying S&S C.I. Standard specials such as tees, bends, collars tapers
and caps etc, suitable for flanged jointing as per IS : 1538 :
18.66.2 Above 300 mm dia

Materials :-
7709 Cost of specials quintal 1.00 3 988.00 3 988.00
Labour
TOTAL 4 092.98
TOTAL 4 132.91
Say 4 737.80
18.67 Providing and laying S&S C.I. Standard specials suitable for mechanical jointing
as per IS : 13382
18.67.1 Upto 300mmdia

Materials :-
Labour
TOTAL 5 442.98
TOTAL 5 496.41
Say 6 305.85
18.67 Providing and laying S&S C.I. Standard specials suitable for mechanical jointing
as per IS : 13382

Materials :-
Labour
TOTAL 5 684.98
TOTAL 5 740.83
Say 6 586.90
1015
18.68 Providing and laying D.I. specials of class K-12 suitable for push-on jointing as per
IS : 9523
18.68.1 Upto 600mmdia

Materials :-
Labour
TOTAL 9 042.98
TOTAL 9 132.41
Cost of 1 quintal 10487.23
Say 10487.25
18.68 Providing and laying D.I. specials of class K-12 suitable for push-on jointing as per
IS : 9523

Materials :-
Labour
TOTAL 13 517.98
TOTAL 13 652.16
Say 15 685.00
18.69 Providing and laying D.I Specials of Class K-12suitable for mechanical jointing as
per IS :9523
18.69.1 Upto 600 mm dia

Materials :-
Labour
TOTAL 9 504.98
TOTAL 9 599.03
Say 11 023.85
1016
18.69 Providing and laying D.I. Specials of Class K - 12 suitable for mechanical jointing
as per IS : 9523

Materials :-
7685 Cost of specials quintal 1.00 14239.00 14 239.00
Labour
TOTAL 14 343.98
TOTAL 14 486.42
Say 16 644.40
18.70 Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron
Pipes including testing of joints and including the cost of rubber gasket:
18.70.1 100 mm dia pipes
Details of cost for 50 Joints

Materials :-
7666 Cost of rubber gasket Each 50.0 25.00 1 250.00
Labour
0116 Fitter Day 1.00 151.50 151.50
0117 Asstt Fitter Day 1.00 141.60 141.60
0114 Beldar Day 1.00 135.25 135.25
TOTAL 1 678.35
TOTAL. 1695.13
Add W/o for contractor’s profit and overheads 254.27
Say 39.00

Materials :-
Labour
0116 Fitter Day 1.50 151.50 227.25
0117 Asstt. Fitter Day 1.50 141.60 212.40
0114 Beldar Day 3.00 135.25 405.75
TOTAL 2 595.40
TOTAL 2 621.35
Say 60.30
1017

Materials :-
Labour
0116 Fitter Day 2.00 151.50 303.00
0117 Asstt. Fitter Day 2.00 141.60 283.20
0114 Beldar Day 4.00 135.25 541.00
TOTAL 4 227.20
TOTAL. 4 269.47
Say 98.20

Materials :-
Labour
0116 Fitter Day 2.50 151.50 378.75
0117 Asstt. Fitter Day 2.50 141.60 354.0
0114 Beldar Day 5.00 135.25 676.25
TOTAL 4 809.00
TOTAL. 4 857.09
Say 111.70

Materials :-
Labour
0116 Fitter Day 3.00 151.50 454.50
0117 Asstt. Fitter Day 3.00 141.60 424.80
0114 Beldar Day 6.00 135.25 811.50
TOTAL 6 590.80
TOTAL 6 656.71
Say 153.10
1018
Materials :-
7672 Cost of rubber gasket Each 50.00 123.00 6150.00
Labour
0116 Fitter Day 3.00 151.50 454.50
0117 Asstt. Fitter Day 3.00 141.60 424.80
0114 Beldar Day 6.00 135.25 811.50
TOTAL 7 840.80
TOTAL 7919.21
Say 182.15
Materials :-
Labour
0116 Fitter Day 4.00 151.50 606.00
0117 Asstt. Fitter Day 4.00 141.60 566.40
0114 Beldar Day 8.00 135.25 1082.00
TOTAL 14654.40
TOTAL 14800.94
Say 340.40
Materials :-
Labour
0116 Fitter Day 4.50 151.50 681.75
0117 Asstt. Fitter Day 4.50 141.60 637.20
0114 Beldar Day 9.00 135.25 1217.25
TOTAL 16286.20
TOTAL 16499.06
Say 378.35
1019
Materials :-
Labour
0116 Fitter Day 4.75 151.50 719.62
0117 Asstt. Fitter Day 4.75 141.60 672.60
0114 Beldar Day 9.50 135.25 1284.88
TOTAL 16927.10
TOTAL 17096.37
Say 393.20
Materials :-
Labour
0116 Fitter Day 6.50 151.50 984.75
0117 Asstt. Fitter Day 6.50 141.60 920.40
0114 Beldar Day 13.00 135.25 1758.25
TOTAL 21063.40
TOTAL 21274.03
Say 489.30
Materials :-
Labour
0116 Fitter Day 7.70 151.50 1166.55
0117 Asstt. Fitter Day 7.70 141.60 1090.32
0114 Beldar Day 15.40 135.25 2082.85
TOTAL 31839.72
TOTAL 32158.12
Say 739.65
1020
Materials :-
Labour
0116 Fitter Day 7.70 151.50 1166.55
0117 Asstt. Fitter Day 7.70 141.60 1090.32
0114 Beldar Day 15.40 135.25 2082.85
TOTAL 36739.72
TOTAL 37107.12
Say 853.45
Materials :-
Labour
0116 Fitter Day 8.50 151.50 1287.75
0117 Asstt. Fitter Day 8.50 141.60 1203.60
0114 Beldar Day 17.00 135.25 2299.25
TOTAL 41040.60
TOTAL 41451.01
Say 953.35
1021

Materials :-
Labour
0116 Fitter Day 10.00 151.50 1 515.00
0117 Asstt. Fitter Day 10.00 141.60 1 416.00
0114 Beldar Day 20.00 135.25 2 705.00
TOTAL 54 036.00
TOTAL 54 576.36
Cost for 1 joint 1 255.26
Say 1 255.25
18.70.15 1000 mm dia pipes

Materials :-
7681 Cost of rubber gasket Each 50.0 1 188.00 59 400.00
Labour
0116 Fitter Day 11.00 151.50 1 666.50
0117 Asstt. Fitter Day 11.00 141.60 1 557.60
0114 Beldar Day 22.00 135.25 2 975.50
TOTAL 65 599.60
TOTAL 66 255.60
Cost for 1 joint 1 523.88
Say 1 523.90
18.71 Providing and laying Double Flanged (screwed/ welded) Centrifugally (Spun) Cast
Iron, Class B (IS : 1536):
18.71.1 100 mm dia C.I. Double Flanged Pipe

Materials :-
100 mm dia. cast iron pipes double flanged
Weight of 5 m pipes 27.00x5 = 135.00 Kg
2319 Carriage of pipes 100 metre 5.00 116.30 5.82
Labour
(A) For laying Rate same as per item no 18.23 quintal 1.35 55.55 74.99
SH : Water Supply
1022
TOTAL 4 965.81
TOTAL 5 014.72
Addfor contractor’s profit and overheads 740.96
@15% on all execpt ‘A’
Cost per metre 1 151.14
Say 1 151.15
18.71 Providing and laying Double Flanged (screwed/welded) Centrifugally (Spun) Cast
Iron, Class B (IS: 1536):

Materials :-
Labour
SH : Water Supply
TOTAL 7 687.46
TOTAL 7 763.11
Add for contractor’s profit and overheads 1 146.05
@ 15% on all execpt ‘A’
Say 1 781.85

Materials:-
Weight of 5 m pipes 63.50 0x5 = 317.50 Kg
Labour
SH : Water Supply
TOTAL 10652.41
TOTAL 10757.17
Say 2468.85
1023
Materials :-
weight of 1m pipe= 85.30 kg
Weight of 5 m pipes 85.30 x5 = 426.50 Kg
Labour
SH : Water Supply
TOTAL 14259.60
TOTAL 14399.82
Say 3304.85
Materials :-
7716 Cost of pipe metre 5.00 3 559.00 17795.00
Labour
SH : Water Supply
TOTAL 18 128.21
TOTAL 18 306.44
Say 4 201.30
Iron, Class B (IS : 1536) :
Materials :-
1024
Carriage of pipes 100 metre 5.00 775.32 38.77
Labour
S&fcS
SH : Water Supply
TOTAL 23180.95
TOTAL 23408.99
Say 5372.75
Materials :-
weight of 1m pipe = 166.80kg
7718 Cost of pipe metre 5.00 5 885.00 29 425.00
2326 Carriage of pipes 100 metre 5.00 1 057.26 52.86
Labour
SH : Water Supply
TOTAL 29 941.15
TOTAL 30 235.93
@15%onallexecpt’A’
Say 6 940.35

Materials :-
Labour
SH : Water Supply
TOTAL 38 759.55
1025
TOTAL 39 141.55
Say 8 985.75
Materials :-
Labour
SH : Water Supply
TOTAL 50 526.77
TOTAL 51025.52
@15%onalIexecpt’A’
Say 11 716.30

Materials :-
weight of 1m pipe= 315.30kg
Labour for laying
(A) Rate same as per item no 18.23 of SH : quintal 15.77 55.55 876.02
Water Supply
TOTAL 65 932.94
TOTAL 66 583.51
@15%on all execpt’A’
Say 15 287.90
1026
18.72 Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming
to IS : 8329
18.72.1 100 mm dia Ductile Iron Class K-7 pipes
Materials :-
100mm dia. cast iron pipes (in 5.5 m lengths)
Weight of 1m pipe= 15.39 kg
Labour for laying
(A) Rate same as per item no 18.23 SH : Water quintal 1.54 55.55 85.55
Supply
TOTAL 6 067.18
TOTAL 6 127.00
Add.for contractor’s profit and overheads 906.22
Say 703.30
to IS : 8329

Materials :-
150 mm dia. cast iron pipes (in 5.5 m lengths)
Weight of 1m pipe= 22.750kg
Labour for laying
(A) Rate same as per item no18.23 SH : Water quintal 2.28 55.55 126.65
Supply
TOTAL 8846.03
TOTAL 8933.22
Add,for contractor’s profit and overheads 1320.99
@15% on all execpt’A’
Say 1025.40
18.72 Providing and laying S&S Centrifugally Cast (Spun) /Ductile Iron Pipes conforming
to IS : 8329 :
Materials :-
1027
Labour for laying
(A) Rate same as per item 18.23 of SH : Water quintal 3.01 55.55 167.21
Supply
TOTAL 12 568.74
TOTAL 12 692.76
Say 1 457.15
18.72 Providing and laying S&S Centrifugally Cast (Spun) /D u c t i l e I r o n Pipes

conforming to IS : 8329 :
Materials :-
Labour for laying
Supply
TOTAL 17013.11
TOTAL 17 181.06
Add, for contractor’s profit and overheads 2 544.41
Say 1 972.55
18.72 Providing and laying S&S Centrifugally Cast (Spun) /Ductile IronPipes conforming
to IS : 8329 :
Materials :-
300mm dia. cast iron pfpes (in 5.5 m lengths)
Weight of 1m pipe =48.400kg
Labour for laying
Supply
1028
TOTAL 24 014.24
TOTAL 24 251.69
Say 2 784.90
18.72 Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron pipes
conforming to IS : 8329 :
Materials :-
Labour for laying
(A) Rate same as per item no 18.23of SH : Water quintal 6.60 55.55 366.63
Supply
TOTAL 27 724.16
TOTAL 27 997.74
Say 3 214.25
to IS : 8329 :
18.72..7 400 mm dia Ductile Iron Class K.-7 pipes
Materials :-
Labour for laying
(A) Rate same as per item no18.23 of SH : Water quintal 7.83 55.55 434.96
Supply
TOTAL 33 100.69
TOTAL 33 427.35
@ 15% on all execpt ‘A’
Say 3 837.60
1029
to IS : 8329
18.72.8 450 mm dia Ductile Iron Class K.-7 pipes

Materials :-
Labour for laying
(A) Rate same as per item no.18.23 of SH : Water quintal 9.14 55.55 507.73
Supply
TOTAL 39 246.95
TOTAL 39 634.34
Say 4 550.35
to IS : 8329

Materials :-
Weight of 1m pipe = 106.640 kg
Weight of 10m pipes 106.640x10 = 1066.40
Kg
7730 Cost of pipe metre 10.00 4 557.00 45570.00
Labour for laying
(A) Rate same as per item no S9S& of SH : Water quintal 10.66 55.55 592.16
Supply
TOTAL 46291.38
TOTAL 46748.37
@15% on allexecpt’A’
Say 5367.20
1030
to IS : 8329

Materials :-
Weight of 1m pipe=138.610kg
Weight of 10m pipes 138.610x10= 1386.10
Kg
Labour for laying
Supply
TOTAL 61073.75
TOTAL 61676.79
@15%on allexecpt’A’
Say 7081.30
to IS : 8329

Materials :-
Weight of 1m pipe=188.920 kg
Weight of 10m pipes 188.920x 10 = 1889.20
Kg
2353 Carriage of pipes 100metre 10.00 1938.30 193.83
Labour for laying
(A) Rate same as per item no 18.23 of SH : Water quintal 18.89 55.55 1049.34 (A)
Supply
TOTAL 75873.17
TOTAL 76621.41
Say 8795.70
1031
to IS : 8329

Materials :-
Labour for laying
(A) Rate same as per item no18.23 SH : Water quintal 24.35 55.55 1 352.64
Supply
TOTAL 105 596.47
Add for water charges @1% on all except ‘A’ 1 042.44
TOTAL 106 638.91
Say 12 243.20
to IS : 8329

Materials:-
2356 Carriage of pipes 100 metre 10.00 2907.45 2 90.74
Labour for laying
(A) Rate same as per item noflfi88£of SH : Water quintal 28.27 55.55 1570.40
Supply
TOTAL 129841.14
Add for water charges @ 1 % on all except ‘A’ 1282.71
TOTAL 131123.85
@15%on allexecpt’A’
Say 15055.70
to IS : 8329

Materials :-
1032
Labour for laying
Supply
TOTAL 157371.91
TOTAL 158926.29
@15% all execpt’A’
Say 18247.50
to IS : 8329

Materials :-
Weight of 1m pipe= 17.760Kg
Weight of 10m pipes 17.760x 10=177.60 Kg
Labour for laying
Supply
TOTAL 6690.29
TOTAL 6756.21
Say 775.50
to IS : 8329

Materials :-
Weight of 1m pipe =26.27Kg
Labour for laying
1033
Supply
TOTAL 9945.31
TOTAL 10043.30
@15%on all execpt’A’
Say 1152.80
to IS : 8329

Materials :-
2322 Carriage of pipes 100 meter 10.00 315.30 31.53
Labour for laying
Supply
TOTAL 13712.34
TOTAL 13847.46
@ 15% on all execpt’A’
Say 1589.45
18.72 Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes
conforming to IS : 8329

Materials :-
Weight of 1m pipe = 48.00 Kg
Labour for laying
Supply
TOTAL 17741.44
TOTAL 17916.19
Say 2056.35
1034
18.72 Providing and laying S&S Centrifugaily Cast (Spun) / Ductile Iron Pipes

Materials :-
Weight of 1m pipe= 60.490 Kg
Labour for laying
Supply
TOTAL 22771.40
TOTAL 22995.75
Say 2639.45
18.72 Providing and laying S&S Centrifugaily Cast (Spun) / Ductile Iron Pipes

Materials :-
Weight of 1m pipe = 79.730 Kg
Labour for laying
Supply
TOTAL 26 770.43
TOTAL 27 033.71
Say 3 102.25
conforming to IS : 8329:
Materials :-
Weight of 1m pipe =94.800 Kg
1035
Labour for laying
Supply
TOTAL 38 262.34
TOTAL 38 639.70
Say 4 435.65
to IS : 8329 :
Materials :-
Labour for laying
Supply
TOTAL 42 495.66
TOTAL 42 914.45
Say 4 925.90
to IS : 8329
Materials :-
Weight of 1m pipe =129.480Kg
7659 Cost of pipe metre 10.00 5600.00 56.000.00
Labour for laying
(A) Rate same as per item no18.23 of SH : Water quintal 12.948 55.55 719.26
Supply
TOTAL 56848.48
TOTAL 57409.77
Say 6591.35
1036
to IS : 8329
Materials:-
Labour for laying
(A) Rate same as per item no.18.23 of SH : Water quintal 16.868 55.55 937.02 (A)
Supply
TOTAL 63880.85
TOTAL 64510.29
Say 7404.65
Materials :-
Labour for laying
Supply
TOTAL 86717.65
TOTAL 87572.74
Say 10052.75
to IS : 8329 :
Materials :-
Wt. of 1 m pipe = 242.60 Kg.
Labour for laying
1037
Supply
TOTAL 98888.38
TOTAL 99863.79
Say 11464.10
to IS : 8329
Materials :-
800 mm dia. cast iron pfpes (in 5.5 m lengths)
Labour for laying
Rate same as per item no 18.23 of SH : Water quintal 26.71 55.55 1483.74
Supply
TOTAL 101871.40
TOTAL 102875.28
Add for contractor’s profit and overheads
@15% on all execpt ‘A’ 15208.73
Say 11808.40
Details of cost for 10 metre Materials :-
Weight of 1m pipe =321.290 Kg
Labour for laying
Rate same as per item no18.23 of SH : Water quintal 32.129 55.55 1784.77
Supply
TOTAL 118802.43
TOTAL 119972.61
Say 13770.10
1038
18.72 Providing and laying S&S Centrifiigally Cast (Spun) / Ductile Iron Pipes conforming
to IS : 8329 :
18.72.29 1000 mm dia Ductile Iron Class K-9 pipes.
Materials :-
1000 mm dia. cast irori pipes (in 5.5 m
lengths)
Labour for laying
Supply
TOTAL 133749.62
TOTAL 135066.91
@ 15% onall execpt’A’
Say 15500.90
18.73 Providing and laying Double Flanged (Screwed/ Welded) Centrifugally (Spun)
Ductile Iron Pipes of Class K 9 conforming to IS : 8329 :
18.73.1 100 mm dia Ductile Iron Double Flanged
Materials :-
100 mm dia. ductile iron pipes double flanged
Labour for laying
(A) For laying Rate same as per item no 18.23 of quintal 1.09 55.55 60.55
SH : Water Supply
TOTAL 9506.37
TOTAL 9600.83
Say 2206.35
1039
18.73 Providing and laying Double Flanged (Screwed/Welded) Centrifugally (Spun)
Ductile Iron Pipes of Class K-9 conforming to IS : 8329
Materials :-
Weight of 5m pipes32.600x5 = 163.00Kg
Labour for laying
SH : Water Supply
TOTAL 13165.24
TOTAL 13295.99
Say 3055.35
Ductile Iron Pipes of Class K - 9 conforming to IS : 8329 :
Materials :-
200mm dia. ductile iron pipes double flanged
Weight of 5m pipes44.200x5 =221.00Kg
Labour for laying
SH : Water Supply
TOTAL 17078.53
TOTAL 17248.09
Say 3963.40
1040

Materials :-
Weight of 5m pipes 59.400x5 = 297.00Kg
Labour for laying
SH : Water Supply
TOTAL 22677.38
TOTAL 22902.50
Say 5262.65
Ductile Iron Pipes of Class K. - 9 conforming to IS : 8329 :
Materials :-
Labour for laying
SH : Water Supply
TOTAL 29179.89
TOTAL 29469.57
Say 6771.65
1041

Materials :-
Labour for laying
SH : Water Supply
TOTAL 36342.63
TOTAL 36703.52
Say 8434.20
Materials :-
Labour for laying
SH : Water Supply
TOTAL 43417.83
TOTAL 43849.01
Say 10076.25
1042

Materials :-
Labour for laying
SH : Water Supply
TOTAL 52484.57
TOTAL 53005.87
Say 12180.70
Materials :-
Labour for laying
(A) For laying Rate same as per item no 18.23 of quintal 7.40 55.55 411.07(A)
SH : Water Supply
TOTAL 63600.68
TOTAL 64232.58
Say 14761.20
1043

Materials :-
Labour for laying
(A) Rate same as per item no 18.23 of quintal 9.95 55.55 552.72
SH : Water Supply
TOTAL 86274.64
TOTAL 87131.86
Say 20023.70
Materials :-
Weight of 1m pipe =254.90 kg
Labour for laying
(A) Rate same as per item no 18.23 of quintal 12.75 55.55 708.26
SH : Water Supply
TOTAL 106397.87
TOTAL 107454.77
Say 24693.40
1044
18.74 Providing and fixing unplastisised P.V.C. connection pipe with PTMT Nuts of
approved quality and colour.
18.74.1 15 mm nominal bore with 30cm length.
Materials :
7862 15 mm nominal bore and 30 cm length PVC each 1.00 27.00 27.00
connection pipe with P.T.M.T. Nuts
TOTAL 39.22
TOTAL 39.61
Say 45.55
18.74 Providing and fixing unplastisised P.V.C. connection pipe with PTMT Nuts of
18.74.2 15 mm nominal bore with 45 cm length.
Materials :
7863 15 mm nominal bore and 45 cm length PVC each 1.00 32.00 32.00
connection pipe with P.T.M.T. Nuts
TOTAL 45.52
TOTAL 45.98
Say 52.90
18.75 Providing and fixing PTMT extension nipple for water tank pipe, fittings of
18.75.1 15 mm nominal bore. Weighing not less than 32gms.
Materials :
7864 P.T.M.T extension nipple 15mm each 1.00 32.00 30.00
TOTAL 33.38
TOTAL 33.71
Say 38.75
18.75.2 20mm nominal bore. Weighing not less than 40gms.
Materials :
TOTAL 39.38
1045

TOTAL 39.77
Say 45.75
18.75.3 25mm nominal bore. Weighing not less than 62gms.
Materials :
TOTAL 57.38
TOTAL 57.95
Say 66.65
18.76 Cutting holes upto 30x30 cm in walls including making good the same :
18.76.1 With F.P.S. bricks.
Details of cost for 10 holes
Size 30x30 cm in 34 cm wall
Labour for cutting holes
0123 (A) Mason 1st class Day 0.16 151.50 24.24
0124 (A) Mason 2nd class Day 0.16 141.60 22.66
0114 (A) Beldar Day 1.25 135.25 169.06
Brick work with bricks of class designation 75
in cement mortar 1:4(1 cement: 4 coarse
sand)
10x0.30x0.30x0.344m = 0.309 cum
Les 33% for pipe etc. = (-) 0.102 cum
= 0.207 cum Say 0.21 cum
(Rate as per item No 6.4.1 of SH :- Brick work.) cum 0.21 2529.05 531.10
12 mm cement plaster 1:4 (1 cement: 4 coarse
sand)
10x2x0.3x0.3m = 1.80 sqm
Les 33% for pipe etc. = (-) 0.59 sqm
= 1.21 sqm Say 1.20 sqm
(Rate as per item no 13.4.1 of SH : sqm 1.2 82.55 99.06
Finishing)
9999 (B) Add for delay L.S. 16.12 1.00 16.12
9999 (B) Sundries L.S. 8.06 1.00 8.06
TOTAL 870.30
(C ) Add 1% for water charges on (A+B) 2.40
TOTAL 872.70
on (A+B+C)
Cost for 10 holes 909.08
Cost for 1 hole 90.91
Say 90.90
1046
18.77 Cutting holes upto 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc.
and repairing the hole after insertion of drain pipe etc. with cement concrete
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
including finishing complete so as to make it leak proof.
Details of cost for 10 holes
Average size 15x15x15 cm
Labour for cutting holes
0114 (A) Beldar Day 1.67 135.25 225.87
sand ; 4 graded stone aggregate 20 mm
nominal size)
10x0.15x0.15x0.15 m = 0.033 cum
= 0.022 cum Say 0.0.02 cum
(Rate as per item no 4.1.3 SH : Concrete cum 0.02 3257.45 65.15
work)
9999 (B) Finishing top and bottom and making the L.S. 121.16 1.00 121.16
holes leak proof
9999 (B) Add for delay L.S. 40.30 1.00 40.30
9999 (B) Sundries L.S. 21.58 1.00 21.58
TOTAL 717.33
(C ) Add 1 % for water charges on (A+B) 6.52
TOTAL 723.85
on (A+B+C)
Cost for 10 holes 822.65
Cost for 1 hole 82.27
Say 82.25
18.78 Making chases upto 7.5x7.5 cm in wails including making good and finishing
with matching surface after housing G.I. pipe etc.
Labour for making chases
0114 (A) Beldar Day 1.00 135.25 135.25
nominal size)
0.075x0.075x10 m = 0.05625 cum
= 0.03769 cum Say 0.04 cum
(Rate as per item no 4.2.5 SH : Concrete cum 0.04 3112.70 124.51
work)
TOTAL 333.04
(B) Add 1 % for water charges on (A) 2.09 (B)
TOTAL 335.13
on (A+B)
Say 36.65
1047
18.79 Making hole upto 20x20 cm and embedding pipes upto 150 mm diameter in
masonry and filling with cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded
stone aggregate 20 mm nominal size) including disposal of malba.
nominal size)
0.2x0.2x10 m = 0.40 cum cum 0.22 3112.70 684.79
Less for pipe  x(0.15)2/4x10m=0.177 cum
= 0.223 cum Say 0.22 cum
(Rate as per item no 4.2.5 SH : Concrete
work)
9999 (A) Disposal of malba L.S. 13.52 1.00 13.52
TOTAL 698.31
(B) Add 1% for water charges on (A) 0.14
TOTAL 698.31
on (A+B)
Say 70.05
18.80 Disinfecting C.I. water mains by flushing with water containing bleaching powder
at 0.5 gms per litre of water and cleaning the same with fresh water, operation to
be repeated three times including getting the sample of water from the disinfected
main tested in the municipal laboratory :
18.80.1 80mm diametre C.I, pipe.
MATERIAL
Bleaching powder
3x3.1416/4x(80/10)2 x(100x100)/1000x0.5 gms.
1301 = 754.28 gms Say 0.008 q quintal 0.008 1550.00 12.40
LABOUR
0116 Fitter Day 0.33 151.50 50.00
0114 Beldar Day 1.31 135.25 177.18
9999 Sundries including testing of samples L.S. 9.88 1.00 9.88
TOTAL 249.46
TOTAL 251.95
Say 289.75
18.80.2 100 mm dia metre C.l.pipe.
MATERIAL
1048

Bleaching powder
3x(3.1416/4)x(100/10)2 x(100x100)/1000x0.5 gms.
1301 = 1178.57 gms Say 0.012 q quintal 0.012 1550.00 18.60
LABOUR
0116 Fitter Day 0.49 151.50 74.24
0114 Beldar Day 1.64 135.25 221.81
TOTAL 328.17
TOTAL 331.45
Say 381.15
18.80.3 125 mm diametre C.I, pipe.
MATERIAL
Bleaching powder
3x(3.1416/4)x(125/10)2 x(100x100)/1000x0.5 gms.
1301 = 1841.52 gms Say 0.008 q quintal 0.018 1550.00 27.90
LABOUR
0116 Fitter Day 0.66 151.50 99.99
0114 Beldar Day 1.97 135.25 266.44
TOTAL 412.27
TOTAL 416.39
Say 478.85
18.80.4 150mm dia metre C.l,pipe.
MATERIAL
Bleaching powder
3x(3.1416/4)x(150/10)2 x(100x100)/1000x0.5 gms.
1301 = 2651 gms Say 0.027 q quintal 0.027 1550.00 41.85
LABOUR
0116 Fitter Day 0.82 151.50 124.23
0114 Beldar Day 2.30 135.25 311.08
TOTAL 500.04
TOTAL 505.04
Say 580.80
1049
be repeated three times including getting the sample of water from the
disinfected main tested in the municipal laboratory :
18.80.5 200mm diametre C.I. pipe.
MATERIAL
Bleaching powder
3x(3.1416/4)x(200/10)2 x(100x100)/1000x0.5 gms.
1301 = 4712.39 gms Say 0.047 q quintal 0.047 1550.00 72.85
LABOUR
0116 Fitter Day 1.15 151.50 174.22
0114 Beldar Day 2.95 135.25 398.99
TOTAL 677.52
TOTAL 684.30
Say 786.95
18.80.6 250 mm diametre C.I. pipe.
MATERIAL
Bleaching powder
3x(3.1416/4)x(250/10)2 x(100x100)/1000x0.5 gms.
1301 = 7363.10 gms Say 0.074 q quintal 0.074 1550.00 114.70
LABOUR
0116 Fitter Day 1.48 151.50 224.22
0114 Beldar Day 3.61 135.25 488.25
TOTAL 867.47
TOTAL 876.14
Say 1007.55
MATERIAL
Bleaching powder
3x(3.1416/4)x(300/10)2 x(100x100)/1000x0.5 gms.
1050

1301 = 10602.88 gms Say 0.106 q quintal 0.106 1550.00 164.30
LABOUR
0116 Fitter Day 1.64 151.50 248.46
0114 Beldar Day 3.94 135.25 532.88
TOTAL 990.10
TOTAL 1000.00
Say 1150.00
MATERIAL
Bleaching powder
3x(3.1416/4)x(350/10)2 x(100x100)/1000x0.5 gms.
1301 = 14431.70 gms Say 0.144 q quintal 0.144 1550.00 223.20
LABOUR
0116 Fitter Day 1.80 151.50 272.70
0114 Beldar Day 4.27 135.25 577.52
TOTAL 1121.78
TOTAL 1133.00
Say 1302.95
MATERIAL
Bleaching powder
3x(3.1416/4)x(400/10)2 x(100x100)/1000x0.5 gms.
1301 = 18849.60 gms Say 0.189 q quintal 0.189 1550.00 292.95
LABOUR
0116 Fitter Day 1.97 151.50 298.46
0114 Beldar Day 4.59 135.25 620.80
TOTAL 1266.03
TOTAL 1278.69
Say 1470.50
1051
be repeated three times including gettingjhe sample of water from the disinfected
MATERIAL
Bleaching powder
3x(3.1416/4)x(450/10)2 x(100x100)/1000x0.5 gms.
1301 = 23856.50 gms Say 0.239 q quintal 0.239 1550.00 370.45
LABOUR
0116 Fitter Day 2.13 151.50 322.45
0114 Beldar Day 4.92 135.25 655.43
TOTAL 1416.82
TOTAL 1430.99
Say 1645.65
MATERIAL
Bleaching powder
3x(3.1416/4)x(500/10)2 x(100x100)/1000x0.5 gms.
1301 = 29452.40 gms Say 0.295 q quintal 0.295 1550.00 457.25
LABOUR
0116 Fitter Day 2.3 151.50 348.45
0114 Beldar Day 5.25 135.25 710.06
TOTAL 1579.46
TOTAL 1595.25
Say 1834.55
1052
MATERIAL
Bleaching powder 3x (3.1416/4)x(600/10)2x
(100x100)/100x0.5gms
1301 = 42411.5 gms Say 0.424 q quintal 0.424 1550.00 657.20
LABOUR
0116 Fitter Day 2.62 151.50 396.93
0114 Beldar Day 5.91 135.25 799.33
TOTAL 1924.83
TOTAL 1944.08
Add 1 Wo for contractor’s profit and overheads 291.61
Say 2235.70
18.81 Extra for every operation of disinfecting the C.I. main by flushing with water
containing bleaching powder at 0.5 gms per litre of water and cleaning the same
with fresh water, including getting the samples of water tested in the municipal
laboratory :
MATERIAL
1301 Bleaching powder quintal 0.003 1550.00 4.65
0116 Fitter Day 0.11 151.50 16.66
0114 Beldar Day 0.49 135.25 66.27
TOTAL 92.00
TOTAL 92.92
Say 106.85
laboratory :
18.81.2 100mm diametreC.I. pipe.

MATERIAL
0116 Fitter Day 0.16 151.50 24.24
1053
0114 Beldar Day 0.57 135.25 77.09

TOTAL 111.95
TOTAL 113.07
Say 130.05
laboratory:
18.81.3 125mm dia metre C.I. pipe.
MATERIAL
0116 Fitter Day 0.22 151.50 33.33
0114 Beldar Day 0.66 135.25 89.26
TOTAL 137.35
TOTAL 138.72
Say 159.55
laboratory :
18.81.4 150 mm dia metre C.I. pipe.

MATERIAL
0116 Fitter Day 0.27 151.50 40.90
0114 Beldar Day 0.74 135.25 100.08
TOTAL 162.08
TOTAL 163.70
Say 188.25
1054
laboratory :
MATERIAL
0 116 Fitter Day 0.58 151.50 87.87
0114 Beldar Day 0.90 135.25 121.72
TOTAL 244.27
TOTAL 246.71
Say 283.70
laboratory:

MATERIAL
116 Fitter Day 0.60 151.50 90.90
114 Beldar Day 1.10 135.25 148.78
TOTAL 289.22
TOTAL 292.11
Say 335.95
laboratory :

MATERIAL
0116 Fitter Day 0.60 151.50 90.90
0114 Beldar Day 1.30 135.25 175.82
TOTAL 334.49
1055

TOTAL 337.83
Say 388.50
laboratory :
MATERIAL
0116 Fitter Day 0.70 151.50 106.05
0114 Beldar Day 1.50 135.25 202.88
TOTAL 399.45
TOTAL 403.44
Say 463.95
laboratory :

MATERIAL
0116 Fitter Day 0.80 151.50 121.20
0114 Beldar Day 1.70 135.25 229.92
TOTAL 466.71
TOTAL 471.38
Say 542.10
laboratory:
1056

MATERIAL
0116 Fitter Day 0.90 151.50 136.35
0114 Beldar Day 1.90 135.25 256.97
TOTAL 537.99
TOTAL 543.37
Say 624.90
laboratory:
MATERIAL
0116 Fitter Day 0.90 151.50 151.50
0114 Beldar Day 2.00 135.25 284.03
TOTAL 610.70
TOTAL 616.81
Say 709.35
laboratory :
MATERIAL
0116 Fitter Day 1.20 151.50 181.80
0114 Beldar Day 2.50 135.25 338.12
TOTAL 764.47
TOTAL 772.11
Say 887.95
1057
18.82 Dismantling old C.I. pipes including excavation and refilling trenches after taking
out the pipes, breaking lead caulked joints, melting of lead and making into blocks
including stacking of pipes at site lead upto 50 metre :
Details of cost for 40.26 m or 11 nos. joints.
Earth work in excavationfor dismantling pipes
including refilling of excavated earth
1x40.26x55x0.75 m= 16.61 cum
Deduct for pipe 1x40.26x3.1416x(0.098)2m

4
= (-)0.30 cum . total=16.31cum
(Rate as per item no. 2.8.1) cum 16.31 103.40 1686.45
{Rate as per item no. 2.25) cum 16.31 45.70 745.37 (A)
Breaking lead caulked joints’ making blocks
and stacking
MATERIALS
0761 Fuel wood required quintal 0.373 265.00 98.84
LABOUR
0117 Assistant Filter Day 0.50 141.60 70.80
0114 Beldar Day 4.00 135.25 541.00
9999 Sundries and carriage L.S. 53.82 1.00 53.82
TOTAL 3203.48
Add 1 % for water charges except on ‘A’ 7.72
TOTAL 3211.20
except on ‘A’
Cost for 40.26 metre 3328.11
Cost for one metre 82.67
Say 82.65
out the pipes, breaking lead caulked joints, melting of lead and making into blocks including
stacking of pipes at site lead upto 50 metre :
18.82.2 100mm diametre C.I. pipe.
Detaila of cost for 40:26 m or 11 nos. joints.

1x40.26x55x0.75 m=16.61 cum
Deduct for pipe 1x40.26x3.141`6

4 x(0.098)2m
= (-)0.44
(Rate as per item no. 2.8.1 of S.H. Earth work) cum 16.17 103.40 1671.98(A)
late as per item no.2.25of S.H. Earth work ) cum 16.17 45.70 738.97(A)
Breaking lead caulked joints,making blockst
and stacking
MATERIALS
LABOUR
0114 Beldar Day 4.50 135.25 608.62
1058

TOTAL 3293.29
Add 1% for water charges except on ‘A’ 8.82
TOTAL 3302.11
except on ‘A’
Say 85.35
including stacking of pipes at site lead uptoJJO metre :
Detaila of cost for 40.26 m or 11 nos. joints.

1x40.26x55x0.75 m= 16.61 cum
Deduct for pipe 1x40.26x3.1416 x(0.144)2
4
=(-) 0.65cum total=15.96cum
(A)(Rate as per item no. 2.8.1 ) cum 15.96 103.40 650.26
(A)(Rate as per item no.2.25 ) cum 15.96 45.70 729.37
Breaking lead caulked joints,and
stacking
MATERIALS
LABOUR
0114 Beldar Day 5.00 135.25 676.25
TOTAL 3 374.83
TOTAL 3 384.78
except on ‘A’
Cost for 40.26 metre 3 535.55
Say 87.80
18.82.4 150mm dia metre C.I. pipe.
1x40.26x55x0.75 m= 16.61 cum
Deduct for pipe 1x40.26x3.1416 x (0.17)2
=(-) 0.91 cum 4
1059
(Rate as per item no. 2.8.1 of S.H. Earth work cum 15.7 103.40 1623.38(A)
(Rate as per item no. 2.25 S.H.. Earth work ) cum 15.7 45.70 717.49(A)
Breaking lead caulked joints,making blocks and
stacking
MATERIALS
LABOUR
0114 Beldar Day 5.50 135.25 743.88
TOTAL 3 460.40
TOTAL 3 471.60
Add 14E% for contractor’s profit and overheads 169.61
excepfon ‘A’
Say 90.45

1x40.26x60x0.75 m=18.12 cum = 16.56 cum
4
(-) 1.56cum Total=16.56cum
as per item no.2.25 of S.H. Earth work) cum 16.56 45.70 756.79(A)
Breaking lead caulked joints making block and
stacking
MATERIALS
LABOUR
0114 Beldar Day 6.50 135.25 879.12
TOTAL 3808.17
TOTAL 3821.56
except on ‘A’
Say 99.95
1060
1x40.26x.65x0.75m= 19.63
= (-) 2.37 cum = 17.26 4
(A) (Rate as per item no. 2.8.1 ) cum 17.26 103.40 1784.68
(A) Rate as per item no. 2.25 ) cum 17.26 45.70 788.78
Breaking lead caulked joints, making blocks and
stacking
MATERIALS
LABOUR
0114 Beldar Day 7.50 135.25 1014.38
TOTAL 4146.13
TOTAL 4161.86
except on ‘A’
Say 109.30

1x40.26x.65x0.75m= 19.63 = 21.14 cum
4
= (-) 3.36 cum = 17.79
(A) (Rate as per item no. 2.8.1 of S.H. Earth work cum 17.79 103.40 1839.49
(A) (Rate as per item no.2.25 of S.H. Earth work cum 17.79 45.70 813.00
Breaking lead caulked joints. making blocks and
stacking
MATERIALS
LABOUR
0114 Beldar Day 8.50 135.25 1149.62
TOTAL 4434.21
1061

TOTAL 4452.03
Add 15%for contractor’s profit and overheads
except on ‘A’ 269.93
Say 117.30
including stacking of pipes at site lead ugto 50 metre :

1x40.26x.75x0.75 m=22.65 cum
Deduct for pipe 1x40.26x3.1416 x (0378)2
4
= (-) 4.51cum = 18.14 cum
(A) (Rate as per item no. 2.8.1 of S.H. Earthwork) cum 18.14 103.40 1875.68
(A) (Rate as per item no. 2.25 of S.H. Earth work ) cum 18.14 45.70 829.00
Breaking lead caulked joints,making blocks and
stacking
MATERIALS
LABOUR
0114 Beldar Day 9.50 135.25 1284.88
TOTAL 4695.22
TOTAL 4715.13
except on ‘A’
Say 124.60
18.82.9 400mm dia metre C.l. pipe.

1x40.26x.80x0.75 m=24.16 cum
4
= (-) 5.93cum = 18.23
1062

(Rate as per item no.2.25 of S.H. Earth work ) cum 18.23 45.70 833.11(A)
Breaking lead caulked jointsmaking blocks and
stacking
MATERIALS
LABOUR
0114 Beldar Day 10.50 135.25 1420.12
TOTAL 4924.52
TOTAL 4946.58
except on ‘A’
Say 131.15
1x40.26x.85x0.75 m=25.67 cum.
4
= (-) 7.29cum =18.38 cum.
(Rate as per item no. 2.8.1 of S.H. Earth work cum 18.38 103.40 1900.49A)
(Rate as per item no. 2.25 of S.H. Earth work ) cum 18.38 45.70 839.97 (A)
Breaking lead caulked joints, blocks and
stacking
MATERIALS
LABOUR
0114 Beldar Day 11.50 135.25 1555.38
TOTAL 5 163.18
TOTAL 5 187.41
Add 1 ^Tfor contractor’s profit and overheads 367.04
except on ‘A’
Say 137.95
1063

1x40.26x.90x0.75m=27.18cum
4
= (-) 8.94cum = 18.24cum
(A) (Rate as per item no. 2.25 S.H. Earth work ) cum 18.24 45.70 833.57
Breaking lead caulked joints, blocks and
stacking
MATERIALS
0771 Kerosene oil liter 2.652 19.00 50.39
LABOUR
0114 Beldar Day 12.50 135.25 1690.62
TOTAL 5357.92
TOTAL 5384.30
except on ‘A’
Say 143.65
1x40.26x1.00x0.75 m=30.20 cum
4
= (-) 12.76cum 17.44 cum.
(A) (Rate as per item no. 2.26 of S.H. Earth work) cum 17.44 45.70 797.01
Breaking lead caulked joints, making blocks
and stacking
MATERIALS
0111 Kerosene oil liter 3.41 19.00 64.79
LABOUR
0114 Beldar Day 14.50 135.25 1961.12
1064
total 5671.06
TOTAL 5701.78
except on ‘A’
Say 153.20
18.83 Labour for cutting C.I. pipe with steel saw.

Detail of cost for one cut.

LABOUR
0116 Fitter Day 0.06 151.50 9.09
0114 Belder Day 0.06 135.25 8.12
9999 Sundries L.S. 1.82 1.00 1.82
TOTAL 19.03
TOTAL 19.22
Cost for each cut 22.10
Say 22.10


LABOUR
0116 Fitter. Day 0.08 151.50 12.12
0114 Belder Day 0.08 135.25 2.73
9999 Sundries L.S. 2.73 1.00 2.73
TOTAL 25.67
TOTAL 25.93
Say 29.80


LABOUR
0116 Fitter. Day 0.11 151.50 16.66
0114 Belder Day 0.11 135.25 14.88
9999 Sundries L.S. 4.42 1.00 4.42
TOTAL 35.96
1065

TOTAL 36.32
Say 41.75

LABOUR
0116 Fitter Day 0.15 151.50 22.27
0114 Belder Day 0.15 135.25 20.29
9999 Sundries L.S. 5.33 1.00 5.33
TOTAL 48.34
TOTAL 48.82
Say 56.15

LABOUR
0116 Fitter Day 0.20 151.50 30.30
0114 Belder Day 0.20 135.25 27.05
9999 Sundries L.S. 7.15 1.00 7.15
TOTAL 64.50
TOTAL 65.14
Say 74.90

LABOUR
0116 Fitter Day 0.25 151.50 37.88
0114 Belder Day 0.25 135.25 38.81
9999 Sundries L.S. 8.06 1.00 8.06
TOTAL 79.75
TOTAL 80.55
Say 92.65
1066

LABOUR
0116 Fitter Day 0.30 151.50 45.45
0114 Belder Day 0.30 135.25 40.58
9999 Sundries L.S. 9.88 1.00 9.88
TOTAL 95.90
TOTAL 96.86
Say 111.40


LABOUR
0116 Fitter Day 0.35 151.50 53.02
0114 Belder Day 0.35 135.25 47.34
9999 Sundries L.S. 10.79 1.00 10.79
TOTAL 111.15
TOTAL 112.26
Say 129.10


LABOUR
0116 Fitter Day 0.40 151.50 60.60
0114 Belder Day 0.40 135.25 54.10
9999 Sundries L.S. 12.48 1.00 12.48
TOTAL 127.18
TOTAL 128.45
Say 147.70


LABOUR
0116 Fitter Day 0.45 151.50 68.18
0114 Belder Day 0.45 135.25 60.86
1067
9999 Sundries L.S. 13.52 1.00 13.50

TOTAL 142.56
TOTAL 143.99
Say 165.60

18.83.11 500 mm diametre C.I. pipe
LABOUR
0116 Fitter Day 0.50 151.50 75.75
0114 Belder Day 0.50 135.25 67.35
9999 Sundries L.S. 16.12 1.00 15.21
TOTAL 158.58
TOTAL 160.17
Say 184.20

LABOUR
0116 Fitter Day 0.60 151.50 90.90
0114 Belder Day 0.60 135.25 81.15
9999 Sundries L.S. 16.12 1.00 16.12
TOTAL 188.17
TOTAL 190.05
Say 218.55
1069
SUB HEAD : 19.0

DRAINAGE
1071
19.1 Providing, laying and jointing glazed stoneware pipes grade ‘A’ with stiff mixture
of cement mortar in the of 1:1 (1 cement: 1 fine sand) including testing of joints
etc. complete :

MATERIALS
1854 (i)100 mm stone ware pipes 60 cm long each 55 30.00 1650.00
2224 (ii)Carriage of pipes 100m. 33.00 70.94 23.41
Added 10% allowance for breakage in items
(I) & (II)
0367 Cement of 50 joints = 0.019 tonne tonne 0.019 4500.00 85.50
0983 Fine sand cum 0.01 320.00 3.20
1881 Spun yarn or plain gaskin @ 0.09 kg per joint kilogram 4.50 30.00 135.00
= 0.09x50 = 4.50 kg
LABOUR
0114 Beldar Day 3.00 135.25 405.75
0101 Bhishti Day 1.00 138.45 138.45
TOTAL 2735.84
TOTAL 2763.20
Say 105.90
of cement mortar in the proportion of 1:1 (1 cement: 1 fine sand) including testing
of joints etc. complete :
MATERIALS
1855 (i) 150 mn stone.ware pipes 60 cm long each 55.00 42.00 2 310.00
2225 (ii) Carriage of pipes 100m. 33.00 141.88 46.82
(i) & (ii)
0983 Fine sand cum 0.019 320.00 6.08
= 0.18x50 = 9 kg
LABOUR
0114 Beldar Day 4.00 135.25 541.00
0101 Bhishti Day 1.00 138.45 138.45
TOTAL 3 916.71
1072
TOTAL 3 955.88
Say 151.65
MATERIALS
1856 (i) 200 mm stone ware pipes 60 cm long each 55.00 80.00 4400.00
(i)&(ii)
983 Fine sand cum 0.028 320.00 8.96
1881 Spun yarn or plain gaskin @ 0.24 kg per joint Kilogram 12.00 30.00 360.00
= 0.24x50 =12.00 kg
LABOUR
0114 Beldar Day 4.50 135.25 608.62
0101 Bhishti Day 1.75 138.45 173.06
TOTAL 6 384.10
Add 1 % for water charges 6384
TOTAL 6 447.94
Say 247.15
MATERIALS
1857 (i) 230 mm stone wacgpipes 60 cm long each 55.00 85.00 4,675.00
(I) & (ii)
0367 Cement of 50 joints = 0.065 tonne tonne 0.065 4,500.00 292.50
0983 Fine sand cum 0.036 320.00 11.52
1073
= 0.27x50 =13.50 kg
LABOUR
0114 Beldar Day 5.00 135.25 676.25
0101 Bhishti Day 1.50 138.45 207.68
TOTAL 6 970.62
TOTAL 7 040.33
Say 269.90
MATERIALS
1858 (i) 250 mm stone ware pipes 60 cm long each. 55 113.00 6 215.00
(i) & (ii)
0 983 Fine sand cum 0.05 320.00 16.00
= 0.30x50= 15.00 kg
LABOUR
0114 Beldar Day 5.50 135.25 743.88
0101 Bhishti Day 1.50 138.45 207.68
TOTAL 8 855.93
TOTAL 8 944.49
Say 342.85
MATERIALS
1859 (i) 300mm stoneware pipes 60 cm long each 55.00 165.00 9 075.00
1074

(i)&(ii)
0367 Cement of 50 joints = 0.125 tonne tonne 0.125 4 500.00 562.00
0983 Fine sand cum 0.075 320.00 24.00
1881 Spun yarn or plain gaskin kilogram 18.00 30.00 540.00
= 0.30x50 =15.00 kg
LABOUR
0114 Beldar Day 6.00 135.25 811.50
0101 Bhishti Day 1.50 138.45 207.68
TOTAL 12 130.55
TOTAL 12 251.86
Say 469.65
19.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded
stone aggregate 40 mm nominal size) alround S.W. pipes including bed concrete
as per standard design:
19.2.1 100 mm diameter S. W. pipe

Area = W x (W/2) + 112x (3.14/4 x W2) -
(3.14/4 xd2)
= W2 x {‘A1/2 + 1/2 x (3.14/4)} - (3.14/4 x d2)
Where W = D + X
D = 100 + 12 + 12 = 124 mm or 12.4 cm
X = 300 mm as trench depth is less than 1200
mm
Area = (30.0 + 12.4)2 (0.5 + 3.14x1/8) -
3.14x’/4X(12.4)2
= (42.4)2 (0.5 + 3.14/8) - 3.14/4x(12.4)2
= (1797.76) (0.89) - 0.7854x153.76
= 1600.01-120.76 = 1479.2 sq.cm.
= 0.1479 sqm Say 0.148 sqm
For 10 m length qty. of concrete reqd. = 1.48
cum
Rate as per item no 4.1.10 of SH : Concrete cum 1.48 2 237.75 3 311.87
Work
Cost of 10 metres 3 311.87
Say 331.20
1075
19.2.2 150 mm diameter S.W, pipe

Area = W x (W/2) + 1/2 x (3.14/4 x W2) -
(3.14/4 xd2)
= W2 x {1/2 + 14 x (3.14/4)} - (3.14/4 x d2)
Where W = D + X
D = 150+ 16+ 16= 182 mm or 18.2 cm
mm
Area = (30.0 + 18.2)2 (0.5 + 3.14x1/8) -
3.14x¼x(18.2)2
= (48.2)2(0.5 + 3.14/8) - 3.14/4x(18.2)2
= (2323.24) (0.89)-260.02
= 2067.68 -260.02 = 1807.66 sq.cm.
= 0.1808 sqm Say 0.181 sqm
cum
Work
Say 405.05
19.2.3 200 mm diameter S.W. pipe
Area = W x (W/2) + 1/2 x (3.14/4 x W2) -
(3.14/4 xd2)
= W2 x {1/2 + 1/2 x (3.14/4)} - (3.14/4 x d2)
Where W = D + X
D = 200 + 17 + 17 = 234 mm or 23.4 cm
mm
Area = (30.0 + 23.4)2 (0.5 + 3.14x1/8) -
3.14x’/4x(23.4)2
= (53.4)2 (0.5 + 3.14/8) - 3.14/4x(23.4)2
= (2851.56) (0.89)-429.83
= 2537.89 -429.83 =2108.06 sq.cm.
= 0.2108 sqm Say 0.211 sqm
cum
Work
Say 472.15
1076
19.2.4 230 mm diameter S.W, pipe
Area = W x (W/2) + ½x(3.14/4 x W2) -
(3.14/4 xd2)
= W2 x {½ + ½ x (3.14/4)} - (3.14/4 x d2)
Where W = D + X
D = 230+ 19+ 19 = 268 mm or 26.8 cm
mm
Area = (30.0 + 26.8)2 (0.5 + 3.14x1/8) -
3.14x¼x(26.8)2
= (56.8)2 (0.5 + 3.14/8) - 3.14/4x(26.8)2
= (3226.24) (0.89) - 563.82
= 2871.35 - 563.82 = 2307.53 sq.cm.
= 0.2308 sqm Say 0.231 sqm
cum
Work
Say 516.90
Area = W x (W/2) + ½ x (3.14/4 x W2) -
(3.14/4 xd2)
= W2 x {½ + ½ x (3.14/4)} - (3.14/4 x d2)
Where W = D + X
D = 250 + 20 + 20 = 290 mm or 29.0 cm
mm
Area = (30.0 + 29.0)2 (0.5 + 3.14x1/8) -
3.14x¼x(29.0)2
= (59.0)2 (0.5 + 3.14/8) - 3.14/4x(29.0)2
= (3481.00) (0.89)-660.18
= 3098.09 - 660.18 = 2437.90 sq.cm.
= 0.24379 sqm Say 0.244 sqm
cum
Work
Say 546.00
1077
stone aggregate 40 mm nominal size) upto haunches of S.W. pipes including
bed concrete as per standard design :
Details of cost for 10 metre length pipe
Area = WxDl + 2x½xR Cot QxR-
[R2/2(3.14/2-Q)] - (3.14/2)R2
= WD1 + R2(Cot Q) - R2(3.14/2 - Q) -
(3.14/2)R2
= WDl+R2(CotQ-3.14 + Q)
Where Sin Q = [R/(W/2)] = 2R/W
W = D + X ; X = 300 mm, D = 100 + 12 + 12 =
124 mm
W= 124+ 300 = 424 mm
D1 = Depth = 100 + (½ x 124) = 162 mm
R = 62 mm
Sin Q = (2x62)/424 = 0.292 thereforeQ = 17°0'
Hence Tan Q = 0.3057
Area = 424 x 162 + (62)2 (Cot Q - 3.14 + Q)
= [68688 + 3844 (1/0.3057 - 180° + 17°0')] sqmm
= [68688 + 3844 (3.27 - 163°0' x 3.14/180)] sqmm
= (68688 + 3844 x 0.43) sqmm
= (68688 + 1652.92) sqmm = 70340.92 sqmm
Say 70341 sqmm or 0.070341 sqm
For 10 m length qty. of concrete reqd. =
0.07034x10 = 0.7034 cum
Work
Say 157.40
stone aggregate 40 mm nominal size) upto haunches of S.W. pipes including bed
concrete as per standard design :
Area = WxDl + 2x½xRcot Q R-
[R2/2(3.14/2-Q)] -(3.14/2)R2
= WD1 + R2(Cot Q) - R2(3.14/2 - Q) -
(3.14/2)R2
= WD1 + R2(Cot Q - 3.14 + Q)
W = D + X;X = 300mm, D= 150+ 16+ 16
= 182 mm
W= 182 + 300 = 482 mm
D1 = Depth = 150 + (½ x 182) = 241 mm
R = 91 mm
Sin Q = (2x91)/482 = 0.3776 therefore
Q = 22°12'
1078
Area = 482x241 +(91)2(Cot Q - 3.14 + Q)

= [116162 + 8281 (1/0.4081-180° +22°12')] sqmm
= [116162 + 8281 (2.45-157°48’x3.14/180)] sqmm
= [116162 + 8281 x (2.45-2.75)] sqmm
= [116162 + 8281 x (-0.30)] sqmm
= (116162 - 2484.3) sqmm = 113677.7 sqmm
Say 113677.7 sqmm or 0.1136777 sqm
0.1136777x10= 1.136777 cum Say 1.14 cum
Rate as per item no 4.1.10 of SH: Concrete cum 1.14 2 237.75 2 551.04
Work
Say 255.10
Details of cost for 10 rnete length pipe
Area = WxDl + 2x½xR Cot Q.R.-
[R2/2(3.14/2-Q)] -(3.14/2)R2
= WD1 + R2(Cot Q) - R2(3.14/2 - Q) -
(3.14/2)R2
= WD1 + R2(Cot Q - 3.14 + Q)
W = D + X ; X = 300 mm, D = 200 + 17 + 17
= 234 mm
W = 234 + 300 = 534 mm
D1 = Depth = 150 + (½ x 234) = 267
mm R= 117mm
Sin Q = (2x117)/534 = 0.4382 thereforeQ =
26°0'
Area = 534 x 267 + (117)2 (Cot Q - 3.14 + Q)
= [142578 + 13689 (1/0.4877-180° + 26°0')] sqmm
= [142578 + 13689 (2.05- 54°0' x 3.14/180)] sqmm
= [142578 + 13689 x (2.05-2.69)] sqmm
= [142578 + 13689 x (-0.64)] sqmm
= (142578 - 8760.96) sqmm = 133817.04 sqmm
0.134x10= 1.34 cum
Rate as per item no 4.1. 10 of SH: Concrete cum 1.34 2 237.75 2 998.58
Work
Say 299.85
1079
19.3: Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded
19.3.4: 230 mm diameter S.W. pipe
Details of cost for 10 nretre Length pipe
Area = WxDl + 2x’/2xR cot Q.R-’[R2(3.14/2-Q)] -
(3.14/2)R2
= WD1 + R2(Cot Q) - R2(3.14/2 - Q) -
(3.14/2)R2
= WD1 +R2(CotQ-3.14 + Q)
W = D + X ; X = 300 mm, D = 230 + 19 + 19
= 268 mm
W = 268 + 300 = 568 mm
D1 = Depth = 150 + (1/2 x 268) = 284 mm
R= 134 mm
Sin Q = (2xl34)/568 = 0.47183 thereforeQ =
28°9'
Area = 568 x 284 + (134)2 (Cot Q - 3.14 + Q)
= [161312 + 17956 (1/0.5351 - 180°
+ 22° 12')] sqmm ‘
= [161312+ 17956(l.87- 151°51’x 3.14/180)] sqmm
= [161312 + 17956 x (1.87-2.65)] sqmm
= [161312 + 17956 x (-0.78)] sqmm
= (161312 - 14005.68) sqmm = 147306
sqmm
0.147x10 =1.47 cum
Work
Say 328.95
19.3 : Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded
Area = WxDl + 2x’/2xR - [R2/2(3.14/2-Q)] -
(3.14/2)R2
= WD1 + R2(Cot Q) - R2(3.14/2 - Q) -
(3.14/2)R2
= WD1 +R2(CotQ-3.14 + Q)
W = D + X ; X = 300 mm, D = 250 + 20 + 20
= 290 mm
W = 290 + 300 = 590 mm
Dl = Depth = 150 + QA x 290) = 295 mm
R = 145 mm
Sin Q = (2xl45)/590 = 0.49154 therefore Q =
1080

29°26'
Area = 590 x 295 + (145)2 (Cot Q - 3.14 + Q)
=[174050 + 21025(1/0.5635- 180° +
29°26')] sqmm
= [174050 + 21025(1.77- 150°34’x
3.14/180)] sqmm
= [ 174050 + 21025 x (1.77-2.63)] sqmm
= [ 174050 + 21025 x (-0.86)] sqmm
= (174050 - 18081.5) sqmm = 155968.5
sqmm
0.156x10= 1.56 cum -”
Work
Say 349.10
19.3 : Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded
Details of cost for 10 meter length pipe
Area= WxDl + 2x’/2xR,- [R2?2(3.14/2-Q)] -
(3.14/2)R2
= WD1 + R2(Cot Q) - R2(3.14/2 - Q) -
(3.14/2)R2
= WD1 + R2(Cot Q - 3.14 + Q)
W = D + X ; X = 300 mm,
D = 300 + 25 + 25 = 350 mm
W = 350 + 300 = 650 mm
Dl = Depth = 150 + (‘1/2 x 350) = 325 mm
R = 175 mm
Sin Q = (2xl75)/650 = 0.5385 thereforeQ
= 32°34'
Area = 650 x 325 + (175)2 (Cot Q - 3.14 + Q)
= [211250 + 30625(1/0.6387- 180° +
32°34')] sqmm
= [211250 + 30625(1.566- 147°26’x
3.14/180)] sqmm
= [211250 + 30625 x (1.566-2.571)] sqmm
= [211250 + 30625 x (-1.005)] sqmm
= [211250 - 30778.13) sqmm = 180471.87
sqmm
Say 0.180 sqm
0.180x10= 1.80 cum
Rate as per item no 4.1.10 of SH: Concrete cum 1.80 2 237.75 4 027.95
Work
Say 402.80
1081
19.4 : Providing and fixing square-mouth S.W. gully trap grade ‘A” complete with C.I.
grating brick masonry chamber with water tight C.I. cover with frame of 300 x300
mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not
less than 2.70 kg as per standard design :
19.4.1: 100x100 mm size P type
19.4.1.1: With F.P.S. Bricks class designation 75
Details of cost of one gully trap
1900 100x100 mm Gully trap ‘P’ type each 1.00 55.00 55.00(A)
1364 C.I. grating .100x100 mm each 1.00 10.00 10.00(A)
1352 C.l. cover with frame 300x300mm inside each 1.00 265.00 256.00(A)
Cement concrete 1:5:10 ( 1 cement: 5 fine
nominal size)
0.68x0.68x0.10 m = 0.046 cum
Concrete around trap
0.30x0.30x0.675 m = 0.061 cum
=0.107 cum
Deduct:
0.345/3x[0.09+0.01+(0.09x0.01)l/2] = 0.015
cum
3.14/4x(0.124)2x0.47 = 0.006 cum
= 0.021 cum
Net quantity 0.107 cum (-) 0.021 cum
= 0.086 cum say 0.09 cum
(Rate as per item 4.1.11 of S.H. : Concrete) cum 0.09 2 079.60 187.16
Brick work with 75 class designation brick in
cement mortar 1:4(1 cement: 4 coarse sand)
1.66x0.115x0.675 m = 0.129 cum say 0.13 cum cum 0.13 2 293.40 298.14
Rate as per item no 6.1.1 of SH : Brick Work
Cement concrete 1:2:4 ( 1 cement: 2 coarse
nominal size)
1.66x0.115x0.04 m = 0.008 cum cum 0.008 3 579.10 28.63
(Rate as per item 4.2.3 of S.H. : concrete
sand) finished with floating coat of neat
cement:
[l/2x0.358x(l.20+0.40)] = 0.286 sqm say
0.29 sqm
(Rate as per item no.13.9 of S.H. : finishing) sqm 0.29 112.80 32.71
TOTAL 881.14
Add 1 % for water charges on (A) 3.34(B)
TOTAL 884.48
on (A+B)
Cost for 1 trap 935.16
Say 935.15
1082
19.4.1.2:With Sewer bricks conforming to IS : 4885
9999 Carriage of materials L.S. 4.50 1.00 4.50(A)
nominal size)
0.68x0.68x0.10 m = 0.046 cum
0.30x0.30x0.675 m = 0.061 cum
=0.107 cum
Deduct:
0.345/3x[0.09+0.01+(0.09x0.01)l/2] = 0.015
cum
3.14/4x(0.124)2x0.47 = 0.006 cum
= 0.021 cum
= 0.086 cum say 0.09 cum
Brick work with sewer bricksconforming
to IS:4885 in
1.66x0.115x0.675 m = 0.129 cum say 0.13 cum
Rate as per item no 6.36.1 of SH : Brick cum 0.13 3 048.75 396.34
Work
nominal size)
1.66x0.115x0.04 m = 0.008 cum
(Rate as per item 4.2.3 of S.H. : concrete cum 0.008 3 579.10 28.63
cement:
[l/2x0.358x(l.20+0.40)] = 0.286 sqm say
0.29 sqm
(Rate as per item no.13.9.1 of S.H. : finishing) sqm 0.29 112.80 32.71
TOTAL 979.34
TOTAL 982.68
on (A+B)
Say 1033.35
1083
19.4: Providing and fixing square-mouth S.W. gully trap grade ‘A” complete with C.I.
19.4.2: 150 x 100 mm size P type.
19.4.2.1: With F.P.S. bricks class designation 75

1902 S.W. Gully trap ‘P’ type 150x100mm each 1.00 86.00 86.00(A)
nominal size)
0.68x0.68x0.10 m = 0.046 cum
0.30x0.30x0.675 m = 0.061 cum
=0.107 cum
Deduct:
0.322/3x[0.09+0.023+(0.09x0.023) 1/2] =
0.017 cum
3.14/4x(0.124)2x0.485 = 0.006 cum
= 0.023 cum
= 0.084 cum say 0.08 cum cum 0.08 2 079.60 166.37
(Rate as per item 4.1.11 of S.H. : Concrete)
Rate as per item no 6.1.1 of SH : Brick
Work
nominal size)
1.66x0.115x0.04 m = 0.008 cum
cement:
[l/2x0.337x(l.20+0.60)] = 0.303 sqm say
0.30 sqm
TOTAL 901.48
TOTAL 905.22
on (A+B)
Say 961.95
1084
19.4.2: 150 x 100 mm size P type.
19.4.2.2: With sewer bricks conforming to IS : 4885
1902 S.W. Gully trap ‘P’ type150x100 mm each 1.00 86.00 86.00(A)
nominal size)
0.68x0.68x0.10 m = 0.046 cum
0.30x0.30x0.675 m = 0.061 cum
=0.107 cum
Deduct:
0.322/3x[0.09+0.023+(0.09x0.023) 1/2] =
0.017 cum
3.14/4x(0.124)2x0.485 = 0.006 cum
= 0.023 cum
= 0.084 cum say 0.08 cum cum 0.08 2 079.60 166.37
(Rate as per item 4.1.11 of S.H. : Concrete)
Brick work with sewer bricks conforming
to IS: 4885 in
Rate as per item no 6.36.1 of SH : Brick
Work
nominal size)
1.66x0.115x0.04 m = 0.008 cum
cement:
[l/2x0.337x(l.20+0.60)] = 0.303 sqm say
0.30 sqm
TOTAL 999.68
TOTAL 1003.42
on (A+B)
Say 1060.15
1085
19.4: Providing and fixing square-mouth S.W. gully trap grade ‘A” complete with C.I.
19.4.3.1: With F.P.S. bricks class designation 75
nominal size)
0.68x0.68x0.10 m = 0.046 cum
0.30x0.30x0.675 m = 0.061 cum
=0.107 cum
Deduct:
0.55/3x[0.09+0.032+(0.09x0.032)1/2] =
0.008 cum
3.14/4x(0.182)2x0.70 = 0.018 cum
= 0.026 cum
= 0.081 cum say 0.08 cum
1.66x0.115x0.675 m = 0.129 cum say 0.13 cum
Rate as per item no 6.1.1 of SH : Brick cum 0.13 2293.40 298.14
Work
nominal size)
1.66x0.115x0.04 m = 0.008 cum
(Rate as per item 4.2.3 of S.H. : concrete) cum 0.008 3 579.10 28.63
cement:
[l/2x0.166x(l.20+0.72)] = 0.159 sqm say
0.16 sqm
TOTAL 963.69
TOTAL 968.22
on (A+B)
Cost for 1 trap 1 036.77
Say 1036.75
1086
19.4: Providing and fixing square-mouth S. W. gully trap grade ‘A” complete with C.I.
19.4.3.2: With Sewer bricks conforming to IS : 4885
nominal size)
0.68x0.68x0.10 m = 0.046 cum
0.30x0.30x0.675 m = 0.061 cum
=0.107 cum
Deduct:
0.155/3x[0.09+0.032+(0.09x0.032) 1/2] =
0.008 cum
3.14/4x(0.182)2x0.70 = 0.018 cum
= 0.026 cum
= 0.081 cum say 0.08 cum
to IS: 4885. in
1.66x0.115x0.675 m = 0.129 cum say 0.13 cum
Rate as per item no 6.36.1 of SH : Brick cum 0.13 3048.75 396.34
Work
nominal size)
1.66x0.115x0.04 m = 0.008 cum
cement:
[l/2x0.166x(l.20+0.072)] = 0.159 sqm say
0.16 sqm
TOTAL 1061.89
TOTAL 1066.43
on (A+B)
Say 1134.95
1087
19.5 : Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking
of useful materials near the site within 50 m lead and disposal of unserviceable
materials into municipal dumps:
19.5.1: 100 mm diameter
LABOUR
0114 Beldar Day 0.49 135.25 66.27
0115 coolie Day 0.36 135.25 48.69
TOTAL 114.69
TOTAL 116.11
Say 13.35
19.5: Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking
19.5.2: 150 mm diameter

LABOUR
0114 Beldar Day 0.49 135.25 66.27
0115 coolie Day 0.45 135.25 60.86
TOTAL 127.13
TOTAL 128.40
Say 14.75
1088
19.5 Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking

LABOUR
0114 Beldar Day 0.49 135.25 66.27
0115 Coolie Day 0.51 135.25 68.98
TOTAL 135.25
TOTAL 136.60
Say 15.70

LABOUR
0114 Beldar Day 0.49 135.25 66.27
0115 Collie Day 0.54 135.25 73.04
TOTAL 139.31
TOTAL 140.70
Say 16.20

LABOUR
0114 Beldar Day 0.49 135.25 66.27
0115 Coolie Day 0.57 135.25 77.09
TOTAL 143.36
TOTAL 144.79
Say 16.65
1089

LABOUR
0114 Beldar Day 0.49 135.25 66.27
0115 Coolie Day 0.63 135.25 85.21
TOTAL 152.99
Say 17.60

LABOUR
0114 Beldar Day 0.60 135.25 81.15
0115 Coolie Day 0.69 135.25 93.32
TOTAL 174.47
TOTAL 176.21
Say 20.25

LABOUR
0114 Beldar Day 0.66 135.25 89.26
0115 Coolie Day 0.75 135.25 101.44
TOTAL 190.70
TOTAL 192.61
Say 22.15
1090

LABOUR
0114 Beldar Day 0.66 135.25 89.26
0115 Coolie Day 0.81 135.25 109.55
TOTAL 198.81
TOTAL 200.80
Say 23.10
19.6 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars
jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement: 2 fine
sand) including testing of joints etc. complete :
19.6.1 100 mm dia. R.C.C. pipe

MATERIALS
1700 100 mm dia pipe (in 2 m. length = 5 nos.) metre 10.00 118.00 1 180.00
1714 Collars 5 Nos. each 5 16.00 80.00
2275 carriage of pipes 100 metre 10.00 116.30 11.63
0 367 Cement of 5 joints = 5x0.00065 = 0.00325 tonne 0.005 4 500.00 22.50
cum = 0.0048 t say 0.005 tonne
0983 Fine sand for 5 joint = 0.0013x5 = 0.0065 cum cum 0.006 320.00 1.92
= 0.006 cum
LABOUR
0 123 Mason 1st class Day 0.32 151.50 48.48
0114 Beldar Day 0.63 135.25 85.21
0101 Bhishti Day 0.16 138.45 22.15
TOTAL 1 497.76
TOTAL 1 512.74
Say 173.95
1091
19.6.2 150mmdia. R.C.C. pipe

MATERIALS
1701 150 mm dia pipe (in 2 m. length = 5 nos.) metre 10.00 135.00 1 350.00
1715 Collars 5 Nos. each 5 21.00 105.00
2281 carriage of pipes 100metre 10.00 193.83 19.38
0367 Cement of 5 joints = 5x0.0008 = 0.004 cum = tonne 0.006 4 500.00 27.00
0.006 tonne
LABOUR
0114 Beldar Day 0.78 135.25 105.50
0101 Bhishti Day 0.16 138.45 22.15
TOTAL 1 746.60
TOTAL 1 764.07
Say 202.85

MATERIALS
1702 250 mm dia pipe (in 2 m. length = 5 nos.) metre 10.00 157.00 1570.00
1716 Collars 5 Nos. each 5.00 34.00 170.00
2287 carriage of pipes 100metre 10.00 448.05 44.80
0367 Cement of 5 joints = 5x0.0012 = 0.006 cum = tonne 0.009 4500.00 40.50
0.009tonne
LABOUR
0114 Beldar Day 1.50 135.25 202.88
0101 Bhishti Day 0.23 138.45 31.84
TOTAL 2,223.20
TOTAL 2,245.43
Cost for 10 metre 2,582.24
Say 258.20
1092
MATERIALS
1703 300 mm dia pipe (in 2.5 m. length = 4 nos.) metre 10.00 228.00 2 280.00
1717 Collars 4 Nos. each 4.00 42.00 168.00
2290 carriage of pipes 100 metre 10.00 553.80 55.38
0367 Cement of 4 joints = 4x0.00185 = 0.0074 cum tonne 0.011 4500.00 49.50
= 0.011 tonne
0983 Fine sand for 4 joint = 0.0037x4 = 0.0148 say cum 0.015 320.00 4.40
0.015cum = 0.006 cum
LABOUR
0114 Beldar Day 1.16 135.25 156.89
0101 Bhishti Day 0.20 138.45 27.69
TOTAL 2 916.50
TOTAL 2 945.66
Say 338.75
MATERIALS
1704 450 mmdiampe (in 2.5 m. length = 4 nos.) metre 10.00 333.00 3 330.00
1718 Collars 4 Nos. each 4.00 63.00 252.00
2299 carriag of pipes metre 10.00 1 292.20 129.22
0 367 Cement of 4 joints = 4x0.0041 = 0.0164 cum tonne 0.024 4 500.00 108.00
= 0.024 t
LABOUR
0114 Beldar Day 1.50 135.25 202.88
0101 Bhishti Day 0.33 138.45 45.69
TOTAL 4 301.06
TOTAL 4 344.07
Say 499.55
1093

MATERIALS
1705 500 mm dia pipe (in 2.5 m. length = 4) metre 10.00 398.00 3 980.00
1719 Collars 4 Nos. each 4.00 73.00 292.00
2299 carriage of pipe 100 metre 10.00 1 292.20 129.22
0367 Cement of 4 joints = 4x0.00185 = 0.0074 cum tonne 0.026 4 500.00 117.00
= 0.011 t
= 0.015 cum
LABOUR
0114 Beldar Day 1.62 135.25 219.10
0101 Bhishti Day 0.33 138.45 45.69
TOTAL 5 035.10
TOTAL 5 085.45
Say 584.85
MATERIALS
1706 600mm dia pipe (in 2.5 m. length = 4 nos.) metre 10.00 642.00 6 420.00
1720 Collars 4 Nos each 4.00 92.00 368.00
2303 carriage of pipes 100 metre 10.00 1 938.30 193.83
0367 Cement of 4 joints = 4x0.0054 = 0.0216 cum = tonne 0.032 4 500.00 144.00
0.032 t
LABOUR
0114 Beldar Day 1.83 135.25 247.51
0101 Bhishti Day 0.33 138.45 45.69
TOTAL 7 706.24
TOTAL 7 783.30
Say 895.10
1094

MATERIALS
1721 Collars 4 Nos each 4.00 102.00 408.00
2303 carriage of pipes 100 meire 10.00 1 938.30 193.83
= 0.037 t
= 0.05 cum
LABOUR
0114 Beldar Day 2.06 135.25 278.62
0101 Bhishti Day 0.42 138.45 58.15
TOTAL 8 617.41
TOTAL 8 703.58
Say 1 000.90

MATERIALS
1723 Collars 4 Nos. each 4.00 146.00 584.00
2303 carriage of pipes 100 metre 10.00 1 938.30 193.83
= 0.042 t
= 0.057 cum
LABOUR
0114 Beldar Day 2.28 135.25 308.37
0101 Bhishti Day 0.42 138.45 58.15
TOTAL 10 050.74
TOTAL 10 151.25
Add 15% fo for contractor’s profit and overheads 1 522.69
Say 1 167.40
1095
19.6.10 900 mm dia. R.C.C. pipe

MATERIALS
1724 Collars 4 Nos. each 4.00 178.00 712.00
2331 Carriage of pipes 100 melre 10.00 2 907.45 290.74
= 0.0488 t Say 0.049 t
LABOUR
0114 Beldar Day 3.00 135.25 405.75
0101 Bhishti Day 0.50 138.45 69.22
TOTAL 12 173.23
TOTAL 12 294.96
Say 1 413.90
19.6.11 1000 mm dia. R.C.C. pipe

MATERIALS
1725 Collars 4 Nos. each 4.00 210.00 840.00
= 0.055 t
6 983 Fine sand for 4 joint = 0.0185x4 = 0.074 cum cum 0.074 320.00 23.68
LABOUR
0114 Beldar Day 4.33 135.25 585.63
0101 Bhishti Day 0.50 138.45 69.22
TOTAL 14 988.85
TOTAL 15 138.74
Say 1 740.95
1096
jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement: 2
fine sand) including testing of joints etc. complete :
19.6.12 1100 mm dia. R.C.C. pipe

MATERIALS
1712 1100 mm dia pipe (in 2.5m.length = 4 Nos.) metre 10.00 1500.00 15000.00
1726 Collars 4 Nos. each 4.00 241.00 964.00
2333 carnage of pipes 100metre 10.00 3876.61 387.66
0367 Cement of 4 joints = 4x0.0103 =0.0412 cum tonne 0.061 4500.00 274.50
= 0.061 t
= 0.082 cum
LABOUR
0114 Beldar Day 6.30 135.25 852.08
0101 Bhishti Day 0.60 138.45 83.07
TOTAL 18 025.64
TOTAL 18 205.90
Say 2 093.70
19.6.13 1200 mm dia. R.C.C. pipe

MATERIALS
1727 Collars 4 Nos each 4.00 280.00 1120.00
2334 Carriage of pipes 100metre 10.00 3876.61 387.66
= 0.068 t
= 0.092 cum
LABOUR
0114 Beldar Day 8.67 135.25 1 172.62
0101 Bhishti Day 0.67 138.45 92.76
TOTAL 19 012.63
TOTAL 19 202.76
Say 2 208.30
1097
19.7 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse
sand ) R.C.C. top slab with 1:2:4 mix (1 cement: 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement: 4 coarse
sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm
thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating
coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2
coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a
19.7.1 Inside size 90x80 cm and .45 cm deep including C.I. cover with frame (light duty)
455x610 mm internal dimensions total weight of cover and frame to be not less
than 38 kg (weight of cover 23 kg and weight of frame 15 kg):
19.7.1.1 With F.P.S. bricks with class designation 75
Details of cost for 1 manhole

MATERIALS
nominal size)
1.51x1.41x0.20=0.426 cum Say 0.43 cun.
Rate as per item no 4.1.8 of SH : Concrete cum 0.43 2449.00 1053.07
Work
in foundation & plinth in cement mortar 1:4 (1
cement: 4 coarse sand)
4.32x0.23x0.35 m = 0.348 cum
Less for pipe 2x3.14/4x(0.15m)2x0.23m = (-)
0.008 cum
= 0.340 cum
Rate as per item no 6.1.1 of SH : Brick Work cum 0.34 2293.40 779.76
nominal size) for benching
2x0.90x(0.80/2) x (0.30+0.20)/2 = 0.18 cum
Less for pipe 1x0.90x3.14/4x(0.15 m)2 = (-)
0.02 cum
= 0.16 cum
Work
cement
3.40mx0.05m = 0.17 sqm
2x1/2x0.80x0.10m = 0.08 sqm
= 0.25 sqm
Rate as per item no.13.9.1 of SH : Finishing sqm 0.25 112.80 25.20
Reinforced cement concrete 1:2:4 (1 cement:
2 coarse sand : 4 graded stone aggregate 20
mm nominal size)
For slab: 1.36x1.26x0.15m = 0.257 cum
Less for cover 0.61x0.455x0.15m = (-) 0.042cum
= 0.215 cum Say 0.22 cum
Rate as per item no 5.3 of SH : RCC Work cum 0.22 3673.85 808.25
Mild steel reinforcement for slab :
1098

0.22 cum @ 48.06 kg/cum = 10.57 kg
Rate as per item no 5.22.1 of SH: RCC Work kg 10.57 41.50 438.66
Form work = 0.90x0.80= 0.72 sqm
Less cover = 0.61x0.45m = (-) 0.278 sqm
=0.42 sqm. say 0.44 sqm.
Rate as per item no 5.9.3 of SH : RCC Work sqm 0.44 187.35 82.43
LABOUR
Extra labour for making channel:
0123 Mason 1st class Day 0.06 151.50 9.09 (A)
0124 Mason 2nd class Day 0.06 141.60 8.50 (A)
1354 C.I. Cover with frame 455x610 mm (inside) each 1.00 1395.00 1 395.00 (B)
9999 Carriage of C.I. cover & frame L.S. 6.76 1.00 6.76 (B)
9999 Painting of C.I. cover & frame with coal tar L.S. 6.76 1.00 6.76 (B)
9999 Sundries L.S. 13.52 1.00 13.52 (B)
TOTAL 5151.19
Add 1% for water charges on (A+B) 14.40 (C)
TOTAL 5165.59
on (A+B+C)
Say 5 383.70
sand ) R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone
coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating
coat of neat cement complete as per standard design :
19.7.1 Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty)
455x610 mm internal dimensions total weight of cover and frame to be not less
19.7.1.2 With Sewer bricks conforming to IS : 4885
MATERIALS
nominal size)
1.51x1.41x0.20m=0.426 cum Say 0.43 cun.
Work
to IS: 4885.
4.32x0.23x0.35 m = 0.348 cum
0.008 cum
= 0.340 cum
Rate as per item no 6.36.1 of SH : Brick cum 0.34 3 048.75 1 036.58
Work
1099

2x0.90x(0.80/2) x (0.30+0.20)/2 = 0.18 cum
Less for pipe 1x0.90x3.14/4x(0.15 m)2 = (-)
0.02 cum
= 0.16 cum
Work
cement
3.40mx0.05m = 0.17 sqm
2x1/2x0.80x0.10m = 0.08 sqm
= 0.25 sqm
mm nominal size)
For slab: 1.36x1.26x0.15m = 0.257 cum
Less for cover 0.61x0.455x0.15m = (-) 0.042
cum
= 0.215 cum Say 0.22 cum
0.22 cum @ 48.06 kg/cum = 10.57 kg
Form work = 0.90x0.80= 0.72 sqm
=0.442 sqm say 0.44 sqm
Less cover = 0.61x0.455m = (-) 0.278 sqm
LABOUR
1354 C.I. Cover with frame 455x610 mm (inside) each 1.00 1395.00 1 395.00 (B)
9999 Sundries L.S. 13.52 1.00 13.52 (B)
TOTAL 5408.01
TOTAL 5422.41
on (A+B+C)
Say 5 640.50
19.7.2 Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium
duty) 500 mm internal diameter, total weight of cover and frame to be not less
1100
19.7.2.1 With F.P.S. bricks class designation 75
MATERIALS
nominal size)
1.81x1.51x0.20m=0.547 cum Say 0.55 cun.
Work
5.12x0.23x0.80 m = 0.942 cum
0.008 cum
= 0.934 cum say 0.93 cum
Work
2x1.20x(0.90x10.30/2) x (0.30+0.20)/2 = 0.270 cum
Less for pipe 1.20x3.14/4x(0.15 m)2 = (-)
0.021 cum
= 0.249 cum say 0.25 cum.
Rate as per item no 4.1.3 of SH : Concrete cum 0.25 3 257.45 814.36
Work
cement
4.20mx0.50m = 2.10 sqm
2x1/2x0.90x0.10m = 0.08 sqm
Total
= 2.19 sqm
mm nominal size)
For slab: 1.66x1.36x0.15m = 0.339 cum
Less for cover 0.7854x(0.50)2x0.15m = (-) 0.029
cum
= 0.31cum
Rate as per item no 5.3 of SH : RCC Work cum 0.31 3 673.85 1 138.89
0.31 cum @ 48.06 kg/cum = 24.83 kg
Rate as per item no 5.22.1 of SH: RCC Work kg 24.83 41.50 1 030.44
Form work = 1.20x0.90= 1.08 sqm
Less cover = 3.14/4x(0.50)2=(-) 0.196 sqm
= 0.884 sqm Say 0.88 sqm
LABOUR
1356 C.I. Cover with frame 500 mm (inside) each 1.00 4 257.00 4 257.00 (B)
1101

9999 Sundries L.S. 16.64 1.00 16.64 (B)
TOTAL 11 186.01
TOTAL 11 229.12
on (A+B+C)
Say 11 882.20
19.7.2 Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium
MATERIALS
nominal size)
1.81x1.51x0.20m=0.547 cum Say 0.55 cun.
Work
Brick work with sewer bricks conforming to IS: 4885.
5.12x0.23x0.80 m = 0.942 cum
0.008 cum
= 0.934 cum say 0.93 cum
Work
2x1.20x0.90x(0.80/2) x (0.30+0.20)/2 = 0.270 cum
Less for pipe 1.20x3.14/4x(0.15 m)2 = (-)
0.021 cum
= 0.249 cum say 0.25 cum
Work
cement
4.20mx0.50m = 2.10 sqm
2x1/2x0.90x0.10m = 0.08 sqm
= 2.19 sqm
1102

mm nominal size)
For slab: 1.66x1.36x0.15m = 0.339 cum
cum
= 0.31cum
0.31 cum @ 48.06 kg/cum = 24.83 kg
Form work = 1.20x0.90= 1.08 sqm
Less cover = 3.14/4x(0.50)2=(-) 0.196 sqm
= 0.884 sqm Say 0.88 sqm
LABOUR
1356 C.I. Cover with frame 500 mm (inside) each 1.00 4 257.00 4 257.00 (B)
9999 Sundries L.S. 16.64 1.00 16.64 (B)
TOTAL 11 888.49
TOTAL 11 931.60
on (A+B+C)
Say 12 584.65
aggregate 20 mm nominal size), foundation_concrete 1:4:8 mix (1 cement: 4 coarse
coat of neat cement complete as per standard design : ,
19.7.3 Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy
than 208 kg (weight of cover 108 kg and weight of frame 100 kg)
MATERIALS
nominal size)
1.81x1.51x0.20m=0.547 cum Say 0.55 cun.
Work
1103

5.12x0.23x0.65 m = 0.765 cum
1x0.56x0.23x0.15 m =0.019 cum
1x0.79x0.23x0.15 = 0.027 cum
=0.811
0.008 cum
= 0.803 cum say 0.80 cum
Work
2x1.20x(0.90/2)x(0.30+0.20)/2 = 0.270 cum
Less for pipe 1.20x3.14/4x(0.15 m)2 = (-)
0.021 cum
= 0.249 cum say 0.25 cum
Work
cement
4.20mx0.35m = 1.47 sqm
2x0.56x0.15m = 0.17 sqm
2x1/2x0.90x0.10m = 0.09 sqm
For fixing cover
0.96x0.96 m =0.922 sqm
2.652 sqm
Less cover 3.14/4x(0.56)2=(-) 0.246 sqm
=2.406 sqm Say 2.41 sqm
mm nominal size)
For slab: 1.66x1.36x0.15m = 0.339 cum
Add extra concreting
1x(0.56+0.79)x0.15x0.15 m=0.03 cum
=0.369 cum
cum
= 0.332 cum Say 0.33 cum
Rate as per item no 5.3 of SH : RCC Work cum 0.33 3 673.85 1 212.37
Steel reinforcement for slab @ 80.9 Kg/cum
For 0.33 cum = 26.43 kg.
Rate as per item no 5.22.1 of SH: RCC Work kg 26.43 41.50 1 096.84
Form work inside area of man-hole 1.20x0.90
=1.08
Less cover = 3.14/4x(0.56)2=(-) 0.246 sqm
= 0.834 sqm Say 0.88 sqm
LABOUR
3860 C.I. Cover with frame 560 dia each 1.00 7 634.00 7 634.00 (B)
9999 Carriage of C.I. cover & frame L.S. 13.52 1.00 13.52(B)
9999 Sundries L.S. 20.28 1.00 20.28 (B)
TOTAL 14430.60
1104
,Code Description Unit Quantity Rate Amount

TOTAL 14 507.58
on (A+B+C)
Say 15 673.85
19.7.3 Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy
than 208 kg (weight of cover 108 kg and weight of frame 100 kg)
MATERIALS
nominal size)
1.81x1.51x0.20m=0.547 cum Say 0.55 cun.
Work
Sewer Brick conforming to IS: 4885.
5.12x0.23x0.65 m = 0.765 cum
1x0.56x0.23x0.15 m =0.019 cum
1x0.79x0.23x0.15 = 0.027 cum
=0.811
0.008 cum
= 0.803 cum say 0.80 cum
Work
2x1.20x(0.90/2)x(0.30+0.20)/2 = 0.270 cum
Less for pipe 1.20x3.14/4x(0.15 m)2 = (-)
0.021 cum
= 0.249 cum say 0.25
Work
cement
4.20mx0.35m = 1.47 sqm
2x0.56x0.15m = 0.17 sqm
2x1/2x0.90x0.10m = 0.09 sqm
For fixing cover
0.96x0.96 m =0.922 sqm
= 2.652 sqm
1105

2
Less cover 3.14/4x(0.56) =(-) 0.246 sqm
=2.406 sqm Say 2.41 sqm
mm nominal size)
For slab: 1.66x1.36x0.15m = 0.339 cum
Add extra concreting
1x(0.56+0.79)x0.15x0.15 m=0.03 cum
=0.369 cum
cum
= 0.332 cum Say 0.33 cum
Steel reinforcement for slab @ 80.9 Kg/cum
For 0.33 cum = 26.43
Form work inside area of man-hole 1.20x0.90
=1.08
Less cover = 3.14/4x(0.56)2=(-) 0.246 sqm
= 0.834 sqm Say 0.88 sqm
LABOUR
3860 C.I. Cover with frame 560 dia each 1.00 7634.00 7 634.00 (B)
9999 Carriage of C.I. cover & frame L.S. 13.52 1.00 13.52(B)
9999 Sundries L.S. 20.28 1.00 20.28 (B)
TOTAL 15 034.88
TOTAL 15 111.86
on (A+B+C)
Say 16 278.10
19.8 Extra for depth for manholes

19.8.1 Size 90x80 cm
Details of cost for one meter
MATERIALS
in cement mortar 1:4(1 cement : 4 coarse
sand)
4.32x0.23x1.00 = 0.994 cum Say 0.99
Rate as per item no. 6.1.1 of S.H : brick work cum 0.99 2293.40 2 270.47
12 mm cement plaster 1:3 (1 cement: 3
coarse sand) finished with floating coat of neat
cement
3.40x1 m = 3.40 sqm
Rate as per item no. 13.9.1 of SH : Finishing sqm 3.40 112.80 383.52
TOTAL 2 653.99
Cost for one metre 2 653.99
Say 2 654.00
1106
19.8.1 Size 90x80 cm

MATERIALS
Brick work with modular extruded burnt fire
clay sewer bricks
sand) 1x4.32x0.23x1.0 = 0.994 say 0.99 cum
Rate as per item No 6.36.1 of SH : Brick Work cum 0.99 3 048.75 3 018.26
cement
3.40x1 m = 3.40 sqm
TOTAL 3 401.78
Say 3 401.78

19.8.2 Size 120x90 cm

MATERIALS
clay sewer bricks
sand) 5.12x0.23x1.0 = 1.178 say 1.18 cum
cement
4.20x1 m = 4.20 sqm
TOTAL 3 179.97
Say 3 179.95

19.8.2 Size 120x90 cm

MATERIALS
clay sewer bricks
in cement mortar 1:4 (1 cement : 4 coarse
5.12x0.23x1.00=1.178 say 1.18 cum
Rate as per item No 6.36.1 of SH : Brick cum 1.18 3 048.75 3 597.52
Work
1107
cement
4.20x1 m = 4.20sqm
Rate as per item no. 13.9 of sub head sqm 4.20 112.80 473.76
finishing
TOTAL 4 071.28
Say 4 071.30
19.9 Constructing brick masonry circular type manhole 0.91m internal dia at bottom
and 0.56m dia at/in cement mortar 1:4 (1 cement :4 coarse sand), in side cement
plaster 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished
with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3
coarse sand : 6 graded stone aggregate 40mm nominal size), and making necessary
channel in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone
aggregate 20mm nominal size) finished with a floating coat of neat cement all
complete as per standard design :
19.9.1 0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation)
560mm internal diameter conforming to I.S. 12592, total-weight of cover and frame
to be not less than 182kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand
: 4 graded stone aggregate 20 mm nominal size) including centering shuttering all
complete. (Excavation, foot rests and 12mm thick cement plaster at the external
surface shall be paid for separately):

MATERIALS
nominal size) 1.67x1.67x0.225 = 0.63cum.
Rate as per item no 4.1.6 SH: Concrete work cum 0.63 2 713.05 1 709.22
in cement mortar 1:4 (1 cement: 4 coarse
sand)
Curved on plan
3.14x1.14x0.074x0.23=0.061
3.14x(1.14+0.79)2x0.711x0.23 = 0.496
= 0.557
Duduct arch ring and portion of pipe
2x½x3.14x0.25mx0.230x0.10 m = 0.018 cum
2x3.14/4x(0.15)2x0.230 = 0.008 cum
= 0.026 cum
Net quantity 0.557-0.026 = 0.531 Say 0.53
Brick work in arches with 75 class designation
brick in cement mortar 1:3 ( 1 cement: 3 coarse
sand)
2x½x3.14x0.25 m x0.230x0.10 m = 0.018
cum Say 0.02 cum
Rate as per item no 6.9 of SH: Brick Work cum 0.02 3 847.45 76.95
1108
Cement concrete 1:2:4(1 cement: 2 coarse

nominal size)
For benching:
3.14/4x(0.91+0.82)2x0.20 = 0.118 cum
[(2x8.133)/360]x(4/3)x3.14x(0.45)3 =0.017 cum
= 0.135 cum
Less pipe : 0.91x3.14/4x(0.15)2 = (-) 0.016
cum
= 0.119 cum Say 0.12 cum cum 0.12 3 257.45 390.89
Rate as per item no. 4.2.3 of SH : concrete
nominal size)
For fixing cover : 3.14/4 x d2x thickness
0.7854x1.020x1.020x0.15 m =0.123 cum
Less cover 3.14/4x(0.28)2 x 0.15 m = (-)
0.037 cum
= 0.086 cum Say 0.09 cum
Rate as per item no 4.2.3 of SH : Concrete work cum 0.09 3 579.10 322.12
12 mm cement plaster 1:3(1 cement: 3 coarse
cement
3.14x(0.80+0.56)/2x0.49 = 1.05 sqm
3.14x0.56x0.075 = 0.13 sqm ‘
Benching
3.14x(0.80)2/4-0.80x0.15+0.80x ½x3.14x0.15
= 0.57 sqm
= 1.75 sqm
Rate as per item no 13.9.1 of SH : Finishing sqm 1.75 112.80 197.40
LABOUR
0123 Mason 1st class Day 0.06 151.50 9.09(A)
0124 Mason 2nd class Day 0.06 141.60 8.50(A)
7135 S.F.R.C cover 560 mm dia with fram (heavy each 1.00 838.00 838.00 (A)
duty)
9999 Carriage L.S. 6.89 (A)
9999 Sundries L.S. 16.90 (A)
TOTAL 4 791.46
Add 1 % for water charges on (A) 8.79 (C)
TOTAL 4 800.25
on (A+B)
Say 4 933.50
19.9 Constructing brick masonry circular type manhole 0.91m internal dia at bottom
and 0.56m dia at top in cement mortar 1:4 (1 cement :4 coarse sand), in side cement
plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished
with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3
coarse sand : 6 graded stone aggregate 40mm nominal size), and making necessary
channel in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone
complete as per standard design:
1109
19.9.1 0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation)
560mm internal diameter conforming to I.S. 12592, total weight of cover and frame
to be not less than 182kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse
sand: 4 graded stone aggregate 20 mm nominal size) including centering shuttering
all complete. (Excavation, foot rests and 12mm thick cement plaster at the external

MATERIALS
nominal size) 1.67x1.67x0.225 = 0.63cum.
Rate as per item no 4.1.6 of SH : Concrete work cum 0.63 2 713.05 1 709.22
Brick work with moduler extruded burnt fire
clay sewer bricks
sand)
Curved on plan
3.14x1.14x0.074x0.23 =0.061
3.14x(1.14+0.79)/2x0.711x0.23 = 0.496
= 0.557
2x½x3.14x0.25mx0.230x0.10 m = 0.018 cum
2x3.14/4x(0.15)2x0.230 = 0.008 cum
= 0.026 cum
Net quantity 0.557-0.026 = 0.531 Say 0.53
Brick work moduler extruded burnt fire
clay sewer bricks in arches
brick in cement mortar 1:3 (1 cement: 3 coarse
sand)
2x½x3.14x0.25m x0.230x0.10 m = 0.018
cum Say 0.02 cum
Rate as per item No 6.37 of SH : Brick Work cum 0.02 4 550.30 91.01
nominal size)
For benching:
3.14/4x(0.91+0.82)2x0.20 = 0.118 cum
[(2x8.133)/360]x(4/3)x3.14x(0.45) 3 =0.017
cum
= 0.135 cum
Less pipe : 0.91x3.14/4x(0.15)2= (-) 0.016 cum
= 0.119 cum Say 0.12 cum
Rate as per item no. 4.1.3 of SH : concrete work
Cement concrete 1:2:4 (1 cement: 2 coarse cum 0.12 3 257.45 390.89
nominal size)
0.7854x1.020x1.020x0.15 m =0.123 cum
Less cover 3.14/4x(0.28)2 x 0.15 m = (-)
0.037 cum
= 0.086 cum Say 0.09 cum
1110
cement
3.14x(0.80+0.56)/2x0.49 = 1.05 sqm
3.14x0.56x0.075 = 0.13 sqm
Benching
3.14x(0.80)2/4-0.80x0.15+0.80x’/2x3.14x0.15
= 0.57 sqm
= 1.75 sqm
LABOUR
7135 S.F.R.C cover 560 mm dia with fram (heavy each 1.00 838.00 838.00 (A)
duty)
9999 Carriage L.S. 6.89 1.00 6.89 (A)
9999 Sundries L.S. 16.90 1.00 16.90 (A)
TOTAL 5 205.86
Add 1% for water charges on (A) 8.79 (B)
TOTAL 5 214.65
on (A+B)
Say 5 347.90
19.10 Extra depth for circular type manhole 0.91m internal dia (at bottom) beyond 0.91m
to 1.67m
19.10.1 With F.P.S. bricks class designation 75
Details of Cost for 0.76m depth.
Bricks work in arches with 75 class
designation bricks in cement montar
1:3 (1 cement : 3 coarse sand)
(Rate as per item no. 6.9 SH:- Brick work ) cum 0.63 2 293.40 1 444.84
cement concrete 1:2:4( 1 cement :2 coarse
sand :4 graded stone aggregate 20mm
nominal size)
(Rate as per item no. 4.1.3) cum 0.01 3 257.45 32.57
12mm cement plaster 1:3 (1 cement :
3 coarse sand) finished with neat cement.
Cost for 0.76 m depth 1 740.23
Cost for 1m depth 2 289.77
Say 2 289.75
19.10 Extra depth for circular type manhole 0.91m internal dia (at bottom) beyond 0.91m
to 1.67m
19.10.2 With Sewer bricks conforming IS : 4885
Details of Cost for 0.76m extra depth.

Brick work with modular exturded burnt fire
clay bricks
1111
in cement montar 1:4 (1 cement : 4 coarse
sand)
(Rate as per item no. 6.36.1 Brick work ) cum 0.63 3 048.75 1920.71
Cement concrete 1:2:4 (1 cement :
2 coarse sand : 4 graded stone aggregate
20 mm nominal size )
(Rate as per item no. 4.1.3 - SH:- Concrete) cum 0.01 3 257.45 32.57
3 coarse sand) finished with floating coat of
neat cement.
(Rate as per item no. 13.9.1 finishing) sqm 2.33 112.80 262.82
Cost for 0.76m extra depth 2 216.10
Cost for 1m extra depth 2 915.92
Say 2 915.90
19.11 Constructing brick masonry circular manhole 1.22m internal dia at bottom and
0.56m dia at top in cement mortar 1:4 (1 cement :4 coarse sand) inside cement
plaster 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished
with a floating coat of neat cement^foundation concrete 1:3:6 (1 cement : 3 coarse
sand : 6 graded stone aggregate 40mm nominal size) and making necessary
channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
19.11.1 1.68 m deep with SFRC Cover and frame (heavy duty HD-20 grade designation)
to be not less than 182kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse
sand : 4 graded stone aggregate 20mm nominal size) including centering shuttering
all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external

MATERIALS
nominal size)
1.98x1.98x0.30 = 1.178 say 1.18 cum.
Rate as per item no 4.1.6 of SH : Concrete work cum 1.18 2 713.05 3 201.40
sand)
Curved on plan
3.14x1.45x0.24x0.23 = 0.251
3.14x(1.45+0.79)/2x 1.32x0.23= 1.069
= 1.320
2x½x3.14x0.25mx0.230x0.10 m = 0.018 cum
2x3.14/4x(0.15)2x0.230 = 0.008 cum
= 0.026 cum
Net quantity 1.320-0.026 = 1.294 Say 1.29
cum
brick in cement mortar 1:3(1 cement: 3 coarse
sand)
1112
2x½x3.14x0.25 m x0.230x0.10 m = 0.018cum

Say 0.02 cum
Rate as per item no 6.9 of SH : Brick Work cum 0.02 3 847.45 76.95
nominal size) For benching:
3.14/4x(1.22)2x0.20 = 0.234 cum
[(2x8.133)/360]x(4/3)x3.14x(0.61) 3 =0.043 cum
= 0.277 cum
Less pipe : 1.22x3.14/4x(0.15)2(-) = 0.0216 cum
= 0.2554 cum Say 0.26 cum
Rate as per item no. 4.1.3 of SH : concrete work cum 0.26 3 257.45 846.94
nominal size)
0.7854x1.020x1.020x0.15 m =0.123 cum
Less cover 3.14/4x(0.28)2 x 0.15 m : (-) =
0.037 cum
= 0.086 cum Say 0.09 cum
Rate as per item no 4.2.3 ofSH : Concrete work cum 0.09 3 579.10 322.12
cement
3.14x(1.136+0.56)/2x1.216 = 3.241 sqm
3.14x0.56x0.075 = 0.13 sqm
3.14x(1.136)2/4-1.136x1/2x3.14x0.15= 1.112
sqm
= 4.483 sqm Say 4.48 sqm
LABOUR
7135 S.F.R.C manhole cover and 560 mm each 1.00 838.00 838.00 (A)
dia
9999 Carriage L.S. 6.89 1.00 6.89 (A)
9999 Sundries L.S. 16.90 1.00 16.90 (A)
TOTAL 8 802.34
TOTAL 8 811.25
on (A+B)
Say 8 946.25
19.11 Constructing brick masonry circular manhole 1.22m internal dia at bottom and
0.56m dia at top in cement mortar 1:4 (1 cement :4 coarse sand) inside cement
plaster 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished
with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 coarse
complete as per standard design:
1113
19.11.1 1.68 m deep with SFRC Cover and frame (heavy duty HD-20 grade designation)
560mm internal diameter conforming to l.S. 12592, total weight of cover and frame
to be not less than 182kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse
sand : 4 graded stone aggregate 20mm nominal size) including centering
shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster
at the external surface shall be paid for separately):
19.11.1.2 With Sewer bricks conforming IS : 4885

MATERIALS
nominal size)
1.98x1.98x0.30 = 1.178 say 1.18 cum.
Rate as per item no 4.1 .6 of SH : Concrete work cum 1.18 2 713.05 3 201.40
Brick work modular exturded burnt fire ash clay
sand)
Curved on plan
3.14x1.45x0.24x0.23 = 0.251
3.14x(1.45+0.79)/2x1.32x0.23 = 1.069
= 1.320
2x½x3.14x0.25mx0.230x0.10 m = 0.018 cum
2x3.14/4x(0.15)2 x0.230 = 0.008 cum
= 0.026 cum
Net quantity 1.320-0.026 = 1.294 Say 1.29
cum
Brick work with modular exturded burnt ash clay
brick in arches cement mortar 1:3(1 cement: 3
coarse sand)
2x1/2x3.14x0.25 m x0.230x0.10 m = 0.018
cum Say 0.02 cum
Rate as per item No 6.37 of SH : Brick Work cum 0.02 4 550.30 91.01
nominal size)
For benching:
3.14/4x(1.22)2x0.20 = 0.234 cum
[(2x8.133)/360]x(4/3)x3.14x(0.61) 3 =0.043
cum
= 0.277 cum
Less pipe : 1.22x3.14/4x(0.15)2 (-) = 0.0216
cum
= 0.2554 cum Say 0.26 cum
Rate as per item no. 4.1.3 of SH : concrete work cum 0.26 3 257.45 846.94
nominal size)
For fixing cover : 3.14/4xd2x thickness
0.7854x1.020x1.020x0.15 m =0.123 cum
Less cover 3.14/4x(0.28)2 x 0.15 m : (-) =
0.037 cum
= 0.086 cum Say 0.09 cum
1114
cement
3.14x(1.136+0.56)/2x1.216 = 3.241 sqm
3.14x0.56x0.075 = 0.13 sqm
3.14x(l.136)2/4-1.136x1/2x3.14x0.15 = 1.112
sqm
= 4.483 sqm Say 4.48 sqm
LABOUR
7135 S.F.R.C manhole cover and frame 560 mm each 1.00 838.00 838.00 (A)
dia
9999 Carriage L.S. 6.89 1.00 6.89 (A)
9999 Sundries L.S. 16.90 1.00 16.90 (A)
TOTAL 9 790.80
Add 1% for water charges on (A+B) 8.91 (B)
TOTAL 9 799.71
on (A+B+C)
Say 9 934.70
19.12 Extra depth for circular type manhole 1.22m internal dia (at bottom) beyond 1.68 m
to 2.29 m :
19.12.1 With F.P.S. bricks class designation 75

in cement mortar 1:4 (1 cement : 4 coarse sand)
(Rate as per item no. 6.36.1 SH:-Brick Work ) cum 0.66 2 293.40 1 513.64
neat cement.
(Rate as per item no. 13.9.1 SH:- finishing) sqm 2.56 112.80 288.77
Cost for 0.61 m extra depth 1802.41
Say 2 954.75
19.12 Extra depth for circular type manhole 1.22m internal dia (at bottom) beyond 1.68 m
to 2.29 m :

Brick work with modular exturded burnt fire
clay bricks in cement montar 1:4 (1 cement :
4 coarse sand)
(Rate as per item no. 6.36.1 SH:-Brick Work ) cum 0.66 3 048.75 2 012.18
neat cement.
(Rate as per item no. 13.9.1 SH:- finishing) sqm 2.56 112.80 288.77
Cost for 0.61 m extra depth 2 300.95
1115
19.13 Constructing brick masonry circular manhole 1.52 m internal dia at bottom and
0.56 m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand) inside cement
plaster 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished
with a floating coat of neat cement, foundation concrete 1:3:6 (1 cement : 3 coarse
19.13.1 2.30m deep with SFRC Cover and frame (heavy duty HD-20 grade designation)
to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse

MATERIALS
nominal size) ‘2.74x2.74x0.30=2.25cum
Rate as per item no 4.6 of SH : Concrete work cum 2.25 2 713.05 6 104.36
sand)
Curved on plan
3.14x1.98x0.25x0.46 = 0.716 cum
3.14x(1.98+0.905)/2x0.345xl.93 = 3.019 cum
= 3.735 cum
2x½x3.14x0.25mx0.46x0.10 m = 0.036 cum
2x3.14/4x(0.15)2x0.460 = 0.016 cum
= 0.052 cum
Net quantity 3.735-0.052 = 3.683 cum Say
3.68 cum
Rate as per item no 6.1.1of SH : Brick Work cum 3.68 2 293.40 8 439.71
brick in cement mortar 1:3(1 cement: 3 fine sand)
2x1/2x3.14x0.25 m x0.460x0.10 m = 0.036
cum Say 0.04 cum
Rate as per item no 6.9 of SH : Brick Work cum 0.04 3 847.45 153.90
nominal size) For benching:
3.14/4x(l.52)2x0.20 = 0.363 cum
[(2x8.133)/360]x(4/3)x3.14x(0.76) 3=0.083 cum
= 0.446 cum
Less pipe : 1.52x3.14/4x(0.15)2(-) = 0.027 cum
= 0.419 cum Say 0.42 cum
Rate as per item no. 4.1.3 of SH : concrete work cum 0.42 3 257.45 1 368.13
nominal size)
1116
0.7854x1.020x1.020x0.15 m =0.123 cum

Less cover 3.14/4x(0.28)2 x 0.15 m : (-) =
0.037 cum
= 0.086 cum Say 0.09 cum
Rate as per item no 4.2.3 SH : Concrete work cum 0.09 3 579.10 322.12
cement
3.14x(1.454+0.56)/2xl.799 = 5.694 sqm
3.14x0.56x0.075 = 0.13 sqm
Benching
3.14x( 1.454)2 4-1.454x0.15+1.454x1/2x3.14x
0.15 =1.786 sqm
= 7.61 sqm
LABOUR
7135 S.F.R.C cover 560 mm dia HD-20 each 1.00 838.00 838.00(A)
9999 Carriage L.S. 6.89 1.00 6.89(A)
9999 Sundries L.S. 16.90 1.00 16.90(A)
TOTAL 18 137.73
TOTAL 18 146.64
on (A+B)
Say 18 281.60
19.13 Constructing brick masonry circular manhole 1.52 m internal dia at bottom and
0.56 m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand) inside cement
plaster 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished
with a floating coat of neat cement, foundation concrete 1:3:6 (1 cement : 3 coarse
19.13.1 2.30m deep with SFRC Cover and frame (heavy duty HD-20 grade designation)
to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse
19.13.1.2 With Sewer bricks conforming IS : 4885

MATERIALS
nominal size) 2.74x2.74x0.30=2.25cum
Rate as per item no 4.6 of SH : Concrete work cum 2.25 2 713.05 6 104.36
1117
Brick work with modular exturded burnt fly ash

clay bricks in arches
sand)
Curved on plan
3.14x1.98x0.25x0.46 = 0.716 cum
3.14x(1.98+0.905)/2x0.345xl.93 = 3.019 cum
= 3.735 cum
2x1/2x3.14x0.25mx0.46x0.10 m = 0.036 cum
2x3.14/4x(0.15)2x0.460 = 0.016 cum
= 0.052 cum
Net quantity 3.735-0.052 = 3.683 cum Say
3.68 cum
clay bricks in arches in cement mortar 1:3
(1 cement: 3 sand)
2x1/2x3.14x0.25 m x0.460x0.10 m = 0.036
cum Say 0.04 cum
Rate as per item No6.37 of SH : Brick Work cum 0.04 4 550.30 182.01
nominal size)
For benching:
3.14/4x(1.52)2x0.20 = 0.363 cum
[(2x8.133)/360]x(4/3)x3.14x(0.76) 3 =0.083
cum
= 0.446 cum
Less pipe : 1.52x3.14/4x(0.15)K-) = 0.027
cum
= 0.419 cum Say 0.42 cum
Rate as per item no. 4.1.3 of SH : concrete work cum 0.42 3 257.45 1 368.13
nominal size)
For fixing cover : 3.14/4 x d2 thickness
0.7854x1.020x1.020x0.15 m =0.123 cum
Less cover 3.14/4x(0.28)2x 0.15 m : (-) =
0.037 cum
= 0.086 cum Say 0.09 cum
cement
3.14x(1.454+0.56)/2xl.799 = 5.694 sqm
3.14x0.56x0.075 = 0.13 sqm
Benching
3.14x(1.454)24-l. 454x0.15+1.454x1/2x3.14x
0.15 =1.786 sqm
= 7.61 sqm
LABOUR
Extra labour for making channel :
1118
7135 S.F.R.C cover 560 mm dia HD-20 each 1.00 838.00 838.00(A)
9999 Carriage L.S. 6.89 1.00 6.89(A)
9999 Sundries L.S. 16.90 1.00 16.90(A)
TOTAL 20 945.53
TOTAL 20 954.44
on(A+B)
Say 21 089.40
19.14 Extra depth for circular type manhole 1.52 m internal dia (at bottom) beyond 2.30 m:
19.14.1 With F.P.S bricks class desigantion
Details of cost for 1.88 m extra depth
sand)
(Rate as per item no 6.1.1 of SH : Brick Work) cum 5.26 2 293.40 12 063.28
cement
(Rate as per item no 13.9.1 of SH : finishing) sqm 8.99 112.80 1014.07
Cost for 1 m extra depth 6 956.04
Say 6 956.05
19.14 Extra depth for circular type manhole 1.52 m internal dia (at bottom) beyond 2.30 m :
Details of cost for 1.88 m extra depth
bricks in cement mortar 1:4 (1 cement: 4 coarse
sand)
(Rate as per item no 6.36.1 of SH : Brick Work) cum 5.26 3048.75 16 036.43
cement
(Rate as per item no 13.9.1 of SH : finishing) sqm 8.99 112.80 1014.07
Cost for 1.00 m extra depth 9 069.45
Say 9 069.45
19.15 Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement
concrete blocks 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20
mm nominal size) as per standard design :
19.15.1 With 20x20 mm square bar
Details of cost for one M.S foot rests
MATERIALS
1006 M.S. 20 mm square bar 0.75 m @ 3.137 Kg/m quintal 0.024 3 175.00 76.20
9999 Carriage painting and other sundries L.S. 1.82 1.00 1.82
LABOUR for fabrication
1119

0103 Black smith (2 nd class) Day 0.10 141.60 14.16
0114 Beldar Day 0.10 135.25 13.52
nominal size)
0.20x0.20x0.10 m = 0.004 cum
Rate as per item no 4.2.5 of SH : Concrete work cum 0.004 3 112.70 12.45(A)
LABOUR for fixing M.S. foot rests
0114 Beldar Day 0.05 135.25 6.76
TOTAL 130.77
TOTAL 131.95
Say 149.85
19.15 Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement
concrete blocks cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal
size) as per standard design :
19.15.2 With 20 mm diameter round bar
MATERIALS
1003 M.S. round brass20 mm dia 0.75 m @ 2.47kg quintal 0.018 3050.00 54.90
1 m = 0.018 Qq.
9999 Carriage L.S. 1.82 1.00 1.82
Labour for fabrication
0114 Beldar Day 0.10 135.25 13.52
nominal size)
0.20x0.20x0.10 m = 0.004 cum
Rate as per item no 4.2.5 of SH : Concrete work cum 0.004 3112.70 12.45(A)
LABOUR
0114 Beldar Day 0.05 135.25 6.76
TOTAL 109.47
TOTAL 110.44
Say 125.15
19.16 Providing orange colour safety foot rest of minimum 6 mm thick plastic
encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786
having minimum cross section as 23 mmx25mm and over all minimum length
263 mm and width as 165mm with minimum 112 mm space between protruded
legs having 2 mm tread on top surface by ribbing or chequering besides
necessary and adequate anchoring projections on tail length on 138 mm as per
1120
standard drawing and suitable to with stand the bend test and chemical
resistance test as per specifications and having manufacture’s permanent
identification mark to be visible even after fixing, including fixing in manholes
with 30x20x15 cm cement concrete block 1:3:6 (1 cement: 3 coarse sand : 6 graded
stone aggregate 20 mm nominal size) complete as per design.
MATERIALS
7354 Plastic encapsulated M.S. foot rest 30x20x15 each 1.00 93.00 93.00
9999 Carriage and other sundries L.S. 1.82 1.00 1.82
Cement concrete 1:3:6 (0.30x0.20x15 = 0.009
cum)
Rate as per item no 4.2.5 of SH : Concrete work cum 0.009 3 112.70 28.01(A)
LABOUR
0114 Beldar Day 0.05 135.25 6.76
TOTAL 160.94
TOTAL 162.27
Say 182.40
19.17 Replacement of M.S. foot rests in manholes including dismantling concrete blocks
and fixing with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement: 3 coarse
sand : 6 graded stone aggregate 20 mm nominal size):
19.17.1 With 20x20 mm square bar
MATERIALS
1006 M.S. 20 mm square bar 0.75 m @ 3.137 Kg/m quintal 0.024 175.00 76.20
=0.024 q
9999 Carriage,painting, and other sundries L.S. 1.82 1.00 1.82
0103 Black smith (2nd class) Day 0.10 141.60 14.16
0114 Beldar Day 0.10 135.25 13.52
nominal size)
0.20x0.20x0.10 m = 0.004 cum
Rate as per item no 4.2.5 of SH : Concrete work cum 0.004 3112.70 12.45(A)
LABOUR for dismantling old fort rest cutting
holes and fixing new M.S. foot rests
0124 Blacksmith (2nd class) Day 0.05 141.60 7.08
0114 Beldar Day 0.10 135.25 13.52
TOTAL 146.33
TOTAL 147.67
Say 167.95
1121
19.17 Replacement of M.S. foot rests in manholes including dismantling concrete blocks
and fixing with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement: 3 coarse
sand : 6 graded stone aggregate 20 mm nominal size):
19.17.2 With 20 mm diameter round bar

Details of cost for one MS foot rests
MATERIALS
1003 M.S. roumd bars 20 mm dia 0.75 m @ 2.47 quintal 0.018 3 050.00 54.90
Kg/m =0.018 q
9999 Carriage,painting, and other sundries L.S. 1.82 1.00 1.82
0114 Beldar Day 0.10 135.25 13.52
nominal size)
0.20x0.20x0.10 m = 0.004 cum
Rate as per item no 4.2.5 of SH : Concrete cum 0.004 3 112.70 12.45 (A)
LABOUR for dismantling old fort rest cutting
holes and fixing new M.S. foot rests
0124 Blacksmith (2nd class) Day 0.05 141.60 7.08
0114 Beldar Day 0.10 135.25 13.52
TOTAL 125.03
TOTAL 126.16
Say 143.20
19.18 Supplying and fixing C.I. cover without frame for manholes :
19.18.1 455x610 mm rectangular C.I. cover (light duty)the weight of the cover to be not
less than 23 kg.

Details of cost for one cover
MATERIALS
1355 C.I. Man-hole cover without frame each 1.00 844.00 844.00
9999 Carriage of C.I. Manhole cover L.S. 7.15 1.00 7.15
LABOUR
0114 Beldar Day 0.12 135.25 16.23
TOTAL 867.38
TOTAL 876.05
Cost for 1 cover 1007.46
Say 1007.45
1122
19.18.2 500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less
than 58 kg.

MATERIALS
1357 C.I. Man-hole cover without frame (medium each 1.00 2 129.00 2 129.00
duty) 500 mm internal diameter
9999 Carriage of C.I. cover L.S. 13.47 1.00 13.47
LABOUR
0114 Beldar Day 0.12 135.25 16.23
TOTAL 2 158.70
TOTAL 2 180.29
Cost for 1 no. 2 507.33
Say 2 507.35
19.18.3 560 mm diameter C.I, cover (heavy duty) the weight of the cover to be not less than
108 kg.

MATERIALS
3861 C.I. Man-hole cover without frame (heavy each 1.00 3 664.00 3 664.00
duty) 560 mm internal diameter
9999 Carriage of C. I. cover L.S. 16.12 1.00 16.12
LABOUR
0114 Beldar Day 0.12 135.25 16.23
TOTAL 3 696.35
TOTAL 3 733.31
Cost for 1 no. 4 293.31
Say 4 293.30
19.19 Providing and fixing in position precast R.C.C. manhole cover and frame of
required shape and approved quality
19.19.1 LD-2.5
19.19.1.1 Rectangular shape 600x450mm internal dimensions

MATERIALS
7130 Precast R.C.C manhole cover and frame each 1.00 628.00 628.00
600x450 mm internal dimensions
sand : 4 grade stone aggregate 20 mm nominal
size)
1.00x0.85x0.15 = 0.1275 cum
Less cover with frame
1123
0.85x0.70x0.15 = (-) 0.0893 cum
= 0.0382 cum Say 0.04 cum
Rate as per item no. 4.1.3 of SH : Concrete cum 0.04 3 257.45 130.30 (A)
9999 Carriage of R.C.C cover with frame L.S. 6.76 1.00 6.76
9999 Sundries L.S. 13.52 1.00 13.52
TOTAL 778.58
TOTAL 785.06
Say 883.25
19.19.1 LD-2.5
19.19.1.2 Square shape 450mm internal dimensions

MATERIALS
7131 R.C.C manhole cover and frame 350 mm each 1.00 540.00 540.00
square
9999 Carriage of manhole cover L.S. 6.76 1.00 6.76
size)
0.725x0.725x0.15 = 0.0788 cum
0.575x0.575x0.15 = (-) 0.0496 cum
= 0.0292 cum Say 0.03 cum
Rate as per item no. 4.1.3 of SH : Concrete cum 0.03 3 257.45 97.72 (A)
9999 Sundries L.S. 13.52 1.00 13.52
TOTAL 658.00
TOTAL 663.60
Say 748.50
19.19 Providing and fixing in position precast R.C.C. manhole cover and frame of required
shape and approved quality.
19.19.1 L D- 2.5
19.19.1.3 Circular shape 450mm internal diameter

MATERIALS
7132 R.C.C manhole cover and frame 450 mm dia each 1.00 474.00 474.00
size)
3.14/4x(0.775)2x0.15 = 0.0708 cum
1124
3.14/4x(0.625)2x0.15 = (-) 0.0460 cum
= 0.0248 cum Say 0.03 cum
Rate as per item no. 4.1.3 SH : Concrete cum 0.03 3 257.45 97.72 (A)
9999 Sundries L.S. 13.52 1.00 13.52
TOTAL 592.00
TOTAL 596.94
Say 671.80
shape and approved quality
19.19.2 MD- 10
19.19.2.1 Square shape 450mm x450mm finternal dimension

MATERIALS
7133 R.C.C manhole cover and frame : each 1.0 575.00 575.00
450mmx450mm square
size)
0.95x0.95x0.15 =0.1354 cum
0.80x0.80x0.15 = (-) 0.096 cum
= 0.0394 cum Say 0.04 cum
Rate as per item no.4.1.3 of SH : Concrete cum 0.04 3 257.45 130.30 (A)
9999 Sundries L.S. 16.64 1.00 16.64
TOTAL 728.70
TOTAL 734.68
Say 825.35
19.19.2 MD-10
19.19.2.2 Circular shape 500mm internal diameter

MATERIALS
7134 R.C.C manhole cover and frame 500mm dia each 1.00 575.00 575.00
size)
1125
2
3.14/4x(0.95) x0.15 = 0.1064 cum
Less cover wjth frame
3.14/4x(0.8)2x0.15 = (-) 0.0754 cum
= 0.031 cum Say 0.03 cum
Rate as per item no. 4.1.3 of SH : Concrete cum 0.03 3 257.45 97.72
9999 Sundries L.S. 16.64 1.00 16.64
TOTAL 696.12
TOTAL 702.10
Say 792.75
19.19.3 HD-20
19.19.3.1 Circular shape 560 mm internal diameter

MATERIALS
size)
3.14/4x(1.05)2x0.15 = 0.1299 cum
3.14/4x(0.9)2x0.15 = (-) 0.0955 cum
= 0.0344 cum Say 0.03 cum
Rate as per item no. 4.1.3 of SH : Concrete cum 0.03 3257.45 97.72 (A)
9999 Sundries L.S. 20.28 1.00 20.28
TOTAL 969.52
TOTAL 978.24
on all except ‘A’ 132.08
Cost for 1 no. 1 110.32
Say 1 110.30
shape and approved quality
19.19.4 EHD - 35
19.19.4.1 Circular shape 560 mm internal dia.

MATERIALS
1126
size)
3.14/4x(1.05)2x0.15 = 0.1299 cum
3.14/4x(0.9)2x0.15 = (-) 0.0955 cum
= 0.0344 cum Say 0.03 cum
9999 Sundries L.S. 20.28 1.00 20.28
TOTAL 1 066.52
TOTAL 1 076.21
Cost for 1 no. 1 222.98
Say 1 223.00
19.20 Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard
pattern) the weight of cover to be not less than 4.5kg.

MATERIALS
1353 C.I. Cover for gully trap (standard pattern ) each 1.0 170.00 170.00
9999 Carriage for cover L.S. 2.70 1.00 2.70
LABOUR
0114 Beldar Day 0.03 135.25 4.06
TOTAL 176.76
TOTAL 178.53
Cost for 1 cover 205.31
Say 205.30
19.21 Making connection of drain or sewer line with existing manhole including breaking
into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement:
2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered
on both sides with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a
floating coat of neat cement and making necessary channels for the drain etc.
complete :
19.21.1 For pipes 100 to 230 mm diameter

Details of cost for one connection
MATERIALS
Cement concrete 1:2:4 mix ( 1 cement: 2
coarse sand : 4 grade stone aggregate 20 mm
nominal size)
= 0.30x0.30x0.23 m = 0.0207 cum
Less pipe = 1/2x3.14x0.23x0.23x0.23 =
0.0096 cum
= 0.0111 cum Say 0.10 cum
Rate as per item no. 4.1 .3 of SH : Concrete cum 0.01 3257.45 32.57
1127
12 mm cement plaster 1:3 ( 1 cement: 3 coarse
sand ) finished with a floating coat of neat
cement
2x0.35x0.35=0.25
LABOUR
(For cutting holes average size 30x30 cm in
23 cm thick wall and making channel etc.)
0114 Beldar Day 0.25 135.25 33.81 (A)
9999 Add for delay sundries etc. L.S. 20.15 1.00 20.15
TOTAL 149.90
TOTAL 150.79
on (A+B)
Cost for 1 connection 164.29
Say 164.30
complete :
MATERIALS
nominal size)
= 0.35x0.35x0.30 m = 0.037 cum
Less pipe = 1/2x3.14x0.30x0.30x0.30 = 0.021
cum
= 0.016 cum Say 0.02 cum ‘’
Rate as per item no. 4.1.3 of SH : Concrete cum 0.02 3257.45 65.15
12 mm cement plater 1:3(1 cement: 3 coarse
cement
2x0.40x0.40 =0.32
LABOUR

0123 Mason 1 st class Day 0.12 151.50 18.18 (A)
0114 Beldar Day 0.25 135.25 33.81 (A)
9999 Add for delay sundries etc. L.S. 20.67 1.00 20.67(B)
TOTAL 190.90
Add 1% for water charges on (A+B) 0.90
TOTAL 191.80
on (A+B+C)
Say 205.40
1128
complete :

MATERIALS
nominal size)
= 0.50x0.50x0.30 m = 0.075 cum
Less pipe = 1/2x3.14x0.45x0.45x0.30 = 0.048
cum
= 0.027 cum Say 0.03 cum
Rate as per item no. 4.1.3 of SH : Concrete cum 0.03 3257.45 97.72
12 mm cement plater 1:3(1 cement: 3 coarse
cement
2x0.55x0.55 =0.605 sqm Say 0.60 sqm sqm 0.60 112.80 67.68
Rate as per item no 13.9.1 of SH : Finishing
LABOUR
0114 Beldar Day 0.33 135.25 44.63 (A)
9999 Add for delay sundries etc. L.S. 26.91 1.00 26.91 (B)
TOTAL 283.84
TOTAL 285.02
on (A+B+C)
Say 302.95
19.22 Providing sand cast iron drop connection externally for 60 cm drop from branch
sewer line to main sewer manhole including inspection and cleaning eye with chain
and lid, sand cast iron drop pipe and bend encased alround with cement concrete
1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size)
with all centring and shuttering required, cutting holes in walls and making good
with brick work in cement mortar 1:4 (1 cement : 4 coarse sand) plastered with
cement mortar 1:3 (1 cement : 3 coarse sand) on inside of the manhole wall lead
caulked joints between sand cast iron pipes, and fittings, stiff cement mortar 1:1 (1
cement: 1 fine sand) joints between sand cast iron tee and S.W. pipe, making required
channels complete as per standard design and specifications :
19.22.1 100 mm dia. sand cast iron drop connection
Details of cost for one drop connection
MATERIALS
1617 100 mm diameter sand cost iron pipe = metre 1.80 610.00 338.89
38+30+33 =101 cm say 1 metre
9999 Carriage of pipe L.S 1.43 1.00 1.43
1129
Cutting charges
Rate as per item no 18.83.2 of SH: each cut 3.00 29.80 89.40 (A)
water supply
1336 Cleaning eye with chain and lid each 1.00 37.00 37.00
1621 Sand cast iron bend plain each 1.00 178.00 178.00
1628 Sand cast iron tee each 1.00 265.00 265.00
Brick work in cement mortar 1:4(1 cement: 4
coarse sand)
0.20x0.20x0.23 = 0.009 cum
Less pipe 1/2x3.14x0.10x0.10x0.23 = 0.002
cum
= 0.007 cum
Rate as per item no 6.1.1 of SH : Brick Work cum 0.007 2 293.40 16.05 (A)
Cement concrete 1:5:10 (1 cement: 5 fine
nominal size)
0.40x0.45x1.05 m = 0.189 cum
0.40x0.25x0.40 = 0.040 cum
= 0.229 cum
Less pipe portion
1/2x3.14x0.10x0.10x1.50 = 0.012 cum
Toothing portion
2x0.40x0.05x0.10 m = 0.004 cum
= 0.016 cum
Net 0.229-0.016 = 0.213 cum Say 0.21 cum
(A) Rate as per item no 4.1.11 of SH : Concrete cum 0.21 2 079.60 436.72 (A)
cement
1x0.25x0.25 m = 0.0625-S.ay 0.06 sqm
Rate as per item no 13.9.1 SH : Finishing sqm 112.80 0.06 6.77 (A)
Providing lead caulked joints to 100 mm
diameter pipe and special
Rate as per item no. 12.39.1 of SH : Roofing each 4.00 126.50 506.00
9999 Providing joint to S.W. pipe with cement L.S. 26.91 1.00 26.91
mortar 1:1(1 cement: 1 fine sand)
Form work
1.30x1.05 m= 1.36 sqm
Rate as per item no 5.9.2 of SH : RCC sqm 1.36 180.40 245.34(A)
9999 Sundries including carriage of bends etc. L.S. 26.91 1.00 26.91
LABOUR
For cutting holes 5 cm deep in alternate course
of brick work benching and channel
0114 Beldar Day 2.70 135.25 365.18
TOTAL 2 744.77
Add 1% for water charges on all exept ‘A’ 14.44
TOTAL 2 759.21
on all exept ‘A’
Cost of one drop connection 2 978.05
Say 2 978.05
1130
19.22 Providing sand cast iron drop connection externally for 60 cm drop from branch
sewer line to main sewer manhole including inspection and cleaning eye with chain
and lid, sand cast iron drop pipe and bend encased alround with cement concrete
1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size)
with all centring and shuttering required, cutting holes in walls and making good
with brick work in cement mortar 1:4 (1 cement : 4 coarse sand) plastered with
cement mortar 1:3 (1 cement : 3 coarse sand) on inside of the manhole wall lead
caulked joints between sand cast iron pipes and fittings, stiff cement mortar 1:1 (1
cement: 1 fine sand) joints between sand cast iron tee and S.W. pipe, making required
channels complete as per standard design and specifications :
19.22.2 150 mm dia. sand cast iron drop connection

Details of cost for one drop connection
MATERIALS
150 mm diameter sand cost iron pipe =
1618 34.5+30+37 =101.5cm say 1.00m 1.80 metre 1.00 1 205.00 669.44
9999 Carriage of pipe L.S. 1.82 1.00 1.82
Cutting charges
Rate as per item no 18.83.4 of SH each cut 3.00 56.15 168.45(A)
water supply
1337 Cleaning eye with chain and lid each 1.00 41.00 41.00
1622 Sand cast iron bend plain each 1.00 407.00 407.00
7087 Sand cast iron tee each 1.00 460.00 460.00
Brick work in cement mortar 1:4(1 cement: 4
coarse sand)
0.20x0.20x0.23 = 0.009 cum
Less pipe 1/2x3.14x0.15x0.15x0.23 = 0.004
cum
= 0.005 cum
Rate as per item no 6.1.1 of SH : Brick Work cum 0.005 2 293.40 11.47 (A)
nominal size)
0.45x0.50x1.15 m = 0.259 cum
0.45x0.25x0.45 = 0.0510 cum
= 0.310 cum
Less pipe portion
1/4x3.14x0.15x0.15x1.50 = 0.027 cum
Toothing portion
3x0.45x0.05x0.10 m = 0.004 cum
= 0.031 cum
Net 0.310-0.031 = 0.279 cum Say 0.28 cum
cement
1x0.25x0.25m = 0.0625 Say 0.06 sqm
Rate as per item no13.9.1 of SH : Finishing sqm 0.06 112.80 6.77 (A)
Providing lead caulked joints to 150 mm
diameter pipe and special
Rate as per item no. 12.39.2 of SH : Roofing each 4.00 175.30 701.20 (A)
9999 Providing joint to S.W. pipe with cement L.S. 39.91 1.00 39.91
mortar 1:1 (1 cement: 1 fine sand)
Form work
1.450x1.15 m= 1.67 sqm
1131
Rate as per item no 5.9.2 of SH : RCC sqm 1.67 180.40 301.27 (A)
9999 Sundries including carriage of bends etc. L.S. 34.06 1.00 34.06
LABOUR
For cutting holes 45 holes 5 cm deep toothing
in alternate course of brick work benching and
making channel
0114 Beldar Day 3.50 135.25 473.38
TOTAL 4 147.20
TOTAL 4 170.96
Say 4 530.90
19.23 Extra for depths beyond 60 cm of sand cast iron drop connection complete :
19.23.1 For 100 mm dia. sand cast iron drop connection

MATERIALS
1617 100 mm diameter sand cost iron pipe 1 meter 1.80 metre 1.00 610.00 338.89
nominal size)
0.40x0.45x1.00 mm = 0.18 cum .
Less pipe portion
1/2x3.14x0.10x0.10x1.00 = 0.008 cum
Toothing portion
5x0.40x0.05x0.10 m = 0.010 cum
= 0.018 cum
Net 0.18-0.018 = 0.162 cum Say 0.16 cum
Form work
1.30x1.00 m= 1.30 sqm
9999 Sundries L.S. 7.15 1.00 7.15
LABOUR
For cutting holes 5 cm deep in alternate course
of brick work
0123 Mason lstclass Day 0.04 151.50 6.06
0114 Beldar Day 0.04 135.25 5.41
TOTAL 943.82
TOTAL 947.59
Say 1 004.65
1132
19.23 Extra for depths beyond 60 cm of sand cast iron drop connection complete :
19.23.2 For 150 mm dia. sand cast iron drop connection
MATERIALS
1618 150 mm diameter sand cost iron pipe 1 meter 1.80 metre 1.00 1 205.00 669.44
nominal size)
0.45x0.50x1.00 mm = 0.225 cum
Less pipe portion
1/2x3.14x0.15x0.15x1.00 = 0.018 cum
Toothing portion
5x0.45x0.05x0.10 m = 0.011 cum
= 0.029 cum
Net 0.225-0.029 = 0.196 cum Say 0.20 cum
Form work
1.45x1.00 m= 1.45 sqm
9999 Sundries L.S. 8.09 1.00 8.09
LABOUR
For cutting 5 cm deep in alternate course of
brick work
0114 Beldar Day 0.05 135.25 6.76
TOTAL 1 389.84
TOTAL 1 396.96
Say 1 504.90
19.24 Dismantling of manhole including R.C.C. top slab, C.I. cover with frame including
stacking of useful materials near the site and disposal of unserviceable materials
into municipal dumps within 50 m lead :
19.24.1 Rectangular manhole 90x80 cm and 45 cm deep
Details of cost of a manhole 90x80 and 45
cm deep
Dismantling of cement concrete 1:4:8 (1
cement: 4 coarse sand 8 : aggregate stone 40
mm nominal size)
1.51x1.41x0.20 m = 0.426 cum Say 0.43 cum
Rate as per item no. 15.2.2 cum 0.43 226.90 97.57
Dismantling of second class brick work in
Cement mortar 1:4 (1cement : 4 coarse sand)
4.32x0.23x0.35 m =0.348 cum
Less for pipe 2x3.14x(0.15m)2 x0.23m = (-)
0.008 cum
= 0.340 cum
Rate as per item no. 15.7.4 of SH -.dismantling cum 0.34 310.75 105.66
and dimolishing
1133

Dismantling cement concrete 1:2:4 ( 1 cement :
mm nominal size)
For benching 2x0.90x(0.80/2) x (0.30+0.20)/2
= 0.18 cum
Less for pipe 1x0.90x3.14/4x(0.15m)2 = (-)
0.02 cum
= 0.16 cum
Rate as per item no. 15.2.1 of SH: cum 0.16 368.45 58.95
Dismantling and demolishing
Dismantling of R.C.C slab of 1:2:4 (1 cement:
2 coarse sand : 4 grade stone aggregate 20 mm
nominal size)
For slab : 1.36x1.26x0.15m = 0.257 cum
Less for cover 0.61x0.455x0.15m = (-) 0.042
cum
= 0.215 cum Say 0.22 cum
Rate as per item no 15.3 of SH : Demolishing cum 0.22 537.55 118.26
and dismantling
9999 Removal of C.I. Cover with frame L.S. 7.15 1.00 7.15 (A)
TOTAL 387.59
Add 1% for water charges on (A) 0.07(B)
TOTAL 387.66
on (A+B)
Say 388.75
Details of cost of a manhole 120x90
and 90 cm deep
mm nominal size)
1.81x1.51x0 20 m = 0.547 cum Say 0.55 cum
cement mortar 1 :4 (1 cement : 4 coarse sand)
5.12x0.23x0.30m = 0.942 cum
Less for pipe 2x3.14x(0.15m)2x0.23 m = (-)
0.008 cum
= 0.934 cum Say 0.93 cum
Rate as per item no. 15.7.4 of SH :dismantling cum 0.93 310.75 289.00
and dimolishing
Dismantling cement concrete 1:2:4 ( 1 cement :
mm nominal size)
2x1.20x0.90x(0.80/2) x (0.30+0.20)/2 = 2.70
cum
Less for pipe 1.20x3.14/4x(0.15m)2 = (-)
0.021 cum
= 0.249 cum say 0.25
1134

Rate as per item no. 15.2.1 of SH : cum 0.25 368.45 92.11
nominal size)
For slab : 1.66x 1.36x0.15m = 0.339 cum
Less for cover 0.7854x(0.502(0.15m) = (-)
0.029 cum
= 0.31 cum
and dismantling
TOTAL 679.70
TOTAL 679.77
on (A+B)
Say 680.85
19.24.3 Rectangular arch type manhole 140x90cm and 2.45m deep.
Details of cost of a manhole 140x90 and 2.45

m deep
mm nominal size)
2.16m x1.66m x 0.20m = 0.72 cum
cement mortar 1:4 (1 cement: 4 coarse sand)
Brick work in item 5.52mx0.23mx1.20m =
1.524 cum
3.92mx0.23mx1.15m= 1.037 cum
= 2.561 cum
Deduct arch ring and portion of pipe
2x½x3.14x0.25mx0.23x0.1m = 0.018 cum
2x3.14/4(0.15)2xO.23m = 0.008 cum
= (-) 0.026 cum
Net 2.561 - 0.026 = 2.535 cum Say 2.54 cum
Brick work in arch
½x3.14x1.13x0.80x0.23m = 0.327 cum
2x½x3.14x0.25mx0.23x0.1m = 0.018 cum
= 0.345 cum Say 0.35 cum
Net = 2.54+0.35 = 2.89 cum
Rate as per item no. 15.7.4 of SH dismantling cum 2.89 310.75 898.07
and dimolishing
Dismantling cement concrete 1:2:4 ( 1 cement:
20 mm nominal size)
2x1.4x0.90/2x(0.20+0.30)/2 = 0.315 cum
Less pipe 1.4x3.14/4x(0.15)2= (-) 0.025 cum
= 0.290 cum
1135
nominal size)
1.36mx1.06mx0.15 = 0.216 cum
Less cover 3.14x(0.25)2x0.15 = (-) 0.029 cum
= 0.187 cum Say 0.19 cum
and dismantling
9999 Removal of M.S foot rest L.S. 8.06 1.00 8.06 (A)
TOTAL 1 286.63
TOTAL 1 285.78
on (A+B)
Cost of one no 1 288.08
Say 1 288.10
19.24.4 Circular manhole 122 cm diameter and 1.68 m deep.

Details of cost of a manhole 1.22 in internal
diameter 1.68m deep
cement: 3 coarse sand : 6 aggregate stone 40
mm nominal size)
1.98mx1.98mx0.30m=1.178cum say 1.18cum
cement mortar 1:4 (1 cement: 4 coarse sand)
Curved on plan
3.14x1.45x0.24x0.23= 0.251
3.14x(1.45+0.79)/2x1.32x0.23 = 1.069
= 1.320
2x½x3.14x0.25mx0.23x0.10m = 0.018 cum
2x3.14/4(0.15)2x0.23m = 0.008 cum
= 0.026 cum
Net quantity 1.320 - 0.026 = 1.294 Say 1.29
cum
Brick work in arches
2x½x3.14x0.25mx0.230x0.10m = 0.018
cum say 0.02 cum
Total = 1.294+0.02 = 1.314 cum say 1.131
cum
and dimolishing
Dismantling cement concrete 1:2:4 ( 1 cement:
20 mm nominal size)
For benching
3.14/4x(1.22)2x0.20 = 0.234 cum
[(2x8.133)/360]x(4/3)x3.14x(0.61)3 = 0.043
cum
1136
= 0.277 cum
Less pipe:1.22x3.14/4x(0.15) 2(-)=0.0216cum
= 0.2554 cum say 0.26 cum
In cover fixing 0.7854x1.020x1.020x0.15m
= 0.123 cum
Less cover 3.14/4x(0.28)2x0.15m : (-) =
0.037 cum
= 0.086 cum say 0.09 cum
Total = 0.26 + 0.09 = 0.35 cum
9999 Removal of S.F.R.C Cover with frame size L.S. 7.15 1.00 7.15 (A)
560 mm diameter (medium duty)
9999 Removal of M.S foot rests L.S. 8.06 1.00 8.06 (A)
TOTAL 986.02
TOTAL 986.17
on (A+B)
Say 988.45
19.25 Extra for depth of manholes dismantled:


cement mortar 1:5 (1 Cement: 5 fine sand)
4.32x0.23x1.0m = 0.994 cum Say 0.99 cum
Rate as per item no. 15.7.4 SH:- Dismantling cum 0.99 310.75 307.64
9999 Removing of M.S. foot rests L.S. 1.82 1.00 1.82 (A)
TOTAL 309.46
Add 1% water charges on (A) 0.02 (B)
Add 15% for contractor’s profit & overheads 0.28
on A+B
Say 309.75
19.25 Extra for depth of manholes dismantled:


cement mortar 1:5 (1 Cement: 5 fine sand)
5.12x0.23x1.0m = 1.178 cum Say 1.18 cum
Rate as per item no. 15.7.4 SH:- Dismantling cum 1.18 310.75 366.69
9999 Removing of M.S. foot rests L.S. 1.82 1.00 1.82 (A)
TOTAL 368.51
Add 1% water charges on (A) 0.02 (B)
Add 15% for contractor’s profit & overheads 0.28
on A+B
Say 368.80
1137
19.25 : Extra for depth of manholes dismantled:
19.25.3: Rectangular arch type manhole 140x90 cm and 2.45m deep (upto 4.25 m depth).
Details of cost of dismantling one manhole
4.25m deep
Dismantling Ilnd class brick work in cement
mortar 1:4(1 Cement: 4 Coarse sand) for
2.45 depth
Qty for 2.45m depth 5.52x0.23x1.20=1.524cum
3.92mx0.23mxl.l5m= 1.037 cum
Total= 2.561 cum
2x1/2x3.14x0.25mx0.23x0.1 m = 0.018 cum
2x3.14/4(0.15)21x0.23m = 0.008 cum
Total deduction= (-) 0.026 cum
Net 2.561 - 0.026 = 2.535 cum Say 2.54 cum
Qty in arch
1
/2x3.14xl.l3x0.80x0.23m = 0.327 cum
2x’/2 x3.14xO.25mx0.23x0.1m = 0.018 cum
Total= 0.345 cum Say 0.35 cum
Total for 2.45 m depth 2.54 + 0.35 = 2.89 cum
Qty for 4.25m depth
5.52mx0.23mx1.20m= 1.524 cum
3.92mx0.23mx2.95m = 2.660 cum
Total= 4.184 cum
2x1/2x3.14x0.70mx0.23x0.1m = 0.051 cum
2x3.14/4x(0.60)2 x 0.230 = 0.130 cum
Total deduction= (-) 0.181 cum
Net 4.184 - 0.181 = 4.003 cum Say 4.00 cum
Qty in arch
‘/2x3.14xl.l3x0.80x0.23m = 0.327 cum
2x1/2x3.14x0.70mx0.23x0.1m = 0.051 cum
Total= 0.378 cum Say 0.38 cum
Total for 4.25 m depth =4.38 cum
Net difference = 4.38 - 2.89 = 1.49 cum
and demolishing
Dismantling cement concrete 1:2:4 (1 Cement
: 2 coarse sand : 4 graded stone aggregate
40mm nominal size) (Qty for 4.25m depth
2x1.4x(0.90/2)x(0.65+0.75)/2 = 0.882 cum
Less pipe :1.4x3.14/4x(0.602 = (-) 0.396 cum
= 0.486 cum Say 0.49 cum
Qty for 2.45m depth
2x1.4x(0.90/2)x(0.20+0.30)/2 = 0.315 cum
Less pipe : 1.4x3.14/4x(0.15)2 =(-) 0.025 cum
= 0.290 cum Say 0.29 cum
Net difference = 0.49 - 0.29 = 0.20 cum
Rate as per item no 15.2.1 of SH : cum 0.20 368.45 73.69
Demolishing and dismantling
Cost for 1.8 metre depth 536.71
Cost for 1 metre depth 298.17
Say 298.15
1138
19.25 : Extra for depth of manholes dismantled:
19.25.4: Circular manhole 122 cm diameter and 1.68 m deep (upto 2.29 m depth)
Details of cost of dismantling one manhole
2.29m deep
Dismantling cement concrete 1:3:6(1 Cement
: 3 coarse sand : 6 graded stone aggregate
40mm nominal size)
1.98x1.98x0.30 = 1.178 cum. Say 1.18 cum
Rate as per item no. 15.2.1 S.H. dismantling cum 1.18 368.45 434.77
Dismantling IInd class brick work in cement
mortar 1:4 (1 Cement: 4 Coarse sand)
Curved on plan
3.14x1.45x0.85x0.23=0.891
3.14x(1.45+0.79)/2x 1.32x0.23 = 1.069
= 1.96
2x1/2x3.14x0.25mx0.230x0.10 m = 0.018
cum
2x3.14/4x(0.15)2x0.230 = 0.008 cum
Total deduction = 0.026 cum ,
Net quantity 1.96-0.026 = 1.934 Say 1.93 cum
Qty in arch
2x1/2x3.14x0.25 m x0.230x0.10 m = 0.018
cum Say 0.02 cum
Total =1.93+ 0.02= 1.97 cum
Dismantling cemnet concrete 1:2:4 ( 1 cement
: 2 coarse sand : 4 graded stone aggregate 20
mm nominl size )For benching:
3.14/4x(1.22)2x0.20 = 0.234 cum
[(2x8.133)/360]x(4/3)x3.14x(0.61) 3 =0.043
cum
= 0.277 cum
Less pipe : 1.22x3.14/4x(0.15)2(-) = 0.0216
cum
Net qty= 0.2554 cum Say 0.26 cum
For fixing cover : 3.14/4 xd2 xthickness
0.7854x1.020x1.020x0.15 m =0.123 cum
Less cover 3.14/4x(0.28)2x 0.15 m : (-) =
0.037 cum
Net qty = 0.086 cum Say 0.09 cum
Total = 0.26 + 0.09 = 0.35 cum
Rate as per item no 15.2.1 of SH : cum 0.35 368.45 128.96
Dismantling
9999 Removal of SFRC cover L.S. 7.15 1.00 7.15(A)
9999 Removal of M.S. foot rests L.S. 8.09 1.00 8.09(A)
TOTAL 1304.82
TOTAL 1304.97
on (A+B)
Cost of dismantling manhole 2.29m deep 1307.28
Deduct cost of dismantling manhole 1.68m
deep
Rate as per item no 19.24.4 of SH : Drainage each 1 988.45 -988.45
Cost of manhole 0.61m depth 318.83
Cost per metre depth 522.67
Say 522.65
1139
19.26: Raising manhole cover and frame slab to required level including dismantling
existing slab and making good the damage as required (Raising depth of manhole
to be paid separately):
19.26.1 : Rectangular manhole 90x80 cm with rectangular cover 600x450 mm of grade LD - 2.5
Details of cost for one manhole
Dismantling of R.C.C slab of 1:2:4 (1 cement: 2
coarse sand : 4 aggregate stone 20 mm
nominal size) = 1.36x1.26x0.15 = 0.257 cum
Less cover with frame portion
0.85x0.70x0.15 =(-)0.089cum
Net qty = 0.168 cum say 0.17 cum
Rate as per item no. 15.3 of SH : Dismantling cum 0.17 537.55 91.38(A)
and demolishing
9999 Removal of R.C.C cover and frame L.S. 7.15 1.00 7.15
R.C.C work 1:2:4 ( 1 cement: 2 coarse sand :
4 graded stone aggregate 20 mm nominal size
For raised slab - 1.36x1.26x0.15 = 0.257 cum
Less portion cover with frame
= 0.85x0.70x0.15 =(-) 0.089 cum
Rate as per item no. 5.3 of SH : RCC work cum 0.17 3673.85 624.55(A)
Form work = 0.90x0.80 = 0.72 sqm
Less covej: =0.60x0.45 =(-) 0.27 sqm
Net qty= 0.045 sqm
Rate as per item no 5.9.3 of SH : RCC work sqm 0.45 187.35 84.31(A)
9999 Sundries L.S. 13.52 1.00 13.52
TOTAL 820.91
Add 1 % for water charges exept on ‘A’ 0.21
TOTAL 821.12
except on ‘A’
Say 824.25
19.26 : Raising manhole cover and frame slab to required level including dismantling
19.26.2: Rectangular manhole 120x90 cm with circular cover 500 mm dia of grade MD - 10
2 coarse sand : 4 aggregate stone 20 mm
nominal size) 1.66x1.16x0.15 =0.339
Less for RCC cover with frame
3.14/44x(0.80)2x0.15=(-)0.075 cum
Net qty 0.264 cum Say 0.26 cum
and demolishing
4 graded stone aggregate 20 mm nominal size
1.66x1.36x0.15 = 0.339 cum
= 314/4x0.80x0.80x0.15 =(-) 0.075 cum
1140

Rate as per item no 5.3 of SH : RCC Work cum 0.26 3 673.85 995.20(A)
Form work = 1.2x0.90 = 1.08 sqm
Less cover = 3.14/4x(0.50)2=(-) 0.196 sqm
Net qty = 0.884 sqm Say 0.88 sqm
Rate as per item no 5.9.3 of SH : RCC work sqm 0.88 187.35 164.87
9999 Sundries L.S. 16.64 1.00 16.64
TOTAL 1283.62
Add 1% for water charges exept on ‘A’ 0.24
TOTAL 1238.86
except on ‘A’
Say 1287.45
19.26.3 : Rectangular manhole 120x90 cm with circular cover 560 mm dia of grade HD - 20
2 coarse sand : 4 aggregate stone 20 mm
nominal size)
1.66x1.36x0.15 = 0.339 cum
Less for RCC cover with frame
3.14/4x(0.90jfcx0.15 =(-) 0.095 cum
Net qty 0.244 cum Say 0.24 cum
Rate as per item no 15.3 of SH : Dismantling cum 0.24 537.55 129.01(A)
9999 Removal of R.C.C cover and frame L.S. 7.15 1.00 7.15(B)
4 graded stone aggregate 20 mm nominal size)
1.66x1.36x0.15 = 0.339 cum -
= 3.14/4x0.90x0.90x0.15 =(-) 0.095 cum
Rate as per item no 5.3 of SH : RCC Work cum 0.24 3 673.85 881.72(A)
Form work = 1.2x0.90 = 1.08 sqm
Less cover = 3.14/4x(0.56)2 =(-) 0.246 sqm’
Rate as per item no 5.9.3 of SH : RCC work sqm 0.83 187.35 155.50(A)
9999 Sundries L.S. 20.28 1.00 20.28
TOTAL 1 193.66
TOTAL 1 193.93
except on ‘A’
Cost of one no. 1 198.09
Say 1 198.10
1141
19.26.4: Circular manhole 140 cm dia with circular cover 600 mm dia of grade EHD - 35
Dismantling of C.C slab of 1:2:4 (1 cement: 2
coarse sand : 4 aggregate-stone 20 mm
nominal size)
= 3.14/4x(0.985)2x0.15 = 0.114 cum
Less cover 3.14/4x(0.90)2 x0.15 = (-) 0.095 cum
and demolishing
C.C work 1:2:4 ( 1 cement: 2 coarse sand : 4
graded stone aggregate 20 mm nominal size )
3.14/4x(.985)2x0.15 = 0.114cum
= 3.14/4x0.90x0.90x0.15 =(-) 0.095 cum
= 0.019 cum Say 0.02 cum
Rate as per item no.4 2.3 of SH : Concrete cum 0.02 3579.10 71.58(A)
work
9999 Sundries L.S,. 20.28 1.00 20.28
TOTAL 110.67
TOTAL 110.95
except on ‘A’
Say 115.25
19.27: Constructing brick masonry road gully chamber 50x45x60 cm with bricks of class
designation 75 in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450
mm precast R.C.C. horizontal grating with frame complete as per standard design :
MATERIALS
nominal size) 1.11x1.06x0.15=0.176 say 0.18cum
Rate as per item no4.1.11of SH :Concrete work cum 0.18 2 079.60 374.33
Brick work in bricks of clas designation 75 in
2.82 m x 0.23m x0.45 m = 0.29 cum
Rate as per item no 6.1.1 of SH : Brick Work cum 0.29 2 293.40 665.09
12 mm cement plaster 1:3(1 cement: 3
cement
Wall: 1.90x0.45 m = 0.855 sqm r
Bed : 0.45x0.50 m = 0.225 sqm -
Total= 1.080 sqm
1142

nominal size)
2.82x0.23x0.15 m = 0.097 cum Say 0.10 cum
Rate as per item no.4.2.3 of SH:Concrete work cum 0.10 3 579.10 357.91
Form work
3.50x0.15 m = 0.525 sqm Say 0.53 sqm
7380 Precast R.C.C.gully grating with frame each 1.00 533.00 533.00(A)
500x450 mm
9999 Carriage of R.C.C. grating L.S. 7.15 1.00 7.15(A)
9999 Fixing R.C.C. grating L.S. 5.33 1.00 5.33(A)
TOTAL 2 160.24
TOTAL 2 165.69
on (A+B)
Say 2 248.35
19.28: Constructing brick masonry road gully chamber 45x45x77.5 cm with bricks of class
designation 75 in cement w mortar 1:4(1 cement: 4 coarse sand ) with precast
R.C.C. vertical grating complete as per standard design :
19.28.1: With F.P.S. Bricks
nominal size)
1.06mxl.1.06mx0.15 m= 0.17 cum Say .17 cum
Rate as per item no. 4.1.11SH: Concrete work cum 0.17 2 079.60 353.53
Brick work in bricks of class designation 75 in
2.72 m x 0.23m x0.70 m = 0.438 cum
Deduct opening 0.45x0.23x0.10 m = 0.01 cum
Block 3x(0.075)3= 0.001 cum
Total deduction= 0.011 cum
Net qty. = 0.438 (-) 0.011 = 0.427 cum Say
0.43 cum
12 mm cement plaster 1:3 ( 1 cement: 3
cement
Wall: 1.80x0.70 m= 1.26 sqm
Bed : 0.45x0.45 m = 0.202 sqm
Top : 0.45x0.20 m = 0.09 sqm
Sides: 2x0.20x0.10 m = 0.04 sqm
Total= 1.592 sqm -
Deduct opening
0.45x0.10 m = 0.045 sqm
Net qty. = 1.592 (-) 0.045 = 1.547 cum Say
1.55 cum
Rate as per item no 13.9.1-of SH : Finishing sqm 1.55 112.80 174.84
nominal size)
1143

Block = 3X(0.75)3= 0.001 cum
R.C.C. 1:2:4 (1 cement: 2 coarse sand: 4
graded stone aggregate 20 mm nominal size).
0.91x0.91x0.075 m = 0.062 cum Say 0.06
cum
Rate as per item no. 5.3 of SH : RCC work cum 0.06 3 673.85 220.43
Form work
0.45x0.45 m = 0.202 sqm
0.45x0.20 m = 0.09 sqm
outside slab : 3.40x0.075 m = 0.255 sqm
Total= 0.547 sqm Say 0.55 sqm
Mild steel reinforcement for R.C.C work
0.062 cum @ 80 kg/cum = 4.96 kg
Rate as per item no. 5.22.1 of SH : RCC work kg 4.96 41.50 205.84
7381 Vertical R.C.C.grating 450x100 mm each 1.00 250.00 250.00(A)
9999 Fixing and carriage of R.C.C. grating L.S. 20.67 1.00 20.67(A)
TOTAL 2 314.27
TOTAL 2 316.98
on (A+B)
Say 2 358.00
19.29: Constructing brick masonry road gully chamber 110x50x77.5 cm with bricks of
class designation 75 in cement mortar 1:4 (1 cement : 4 coarse sand) including
500x450 mm precast R.C.C. horizontal grating with frame and vertical grating

nominal size)
1.71mx1.71mx0.15m = 0.285 cum Say 0.29
cum
Rate as per item no. 4.1.11 cum 0.29 2 079.60 603.08
1.91 m x 0.23m x0.45 m = 0.199 cum
2.20mx0.23mx0.70 m = 0.354 cum
Total= 0.553 cum ‘
Deduct lintel portion
2x0.23x0.20x0.20 m = (-) 0.018 cum
cement
Wall: 1.80x0.70 m = 1.26 sqm
1144
Wall: 1.40x0.45 m = 0.63 sqm

Bed: 1.10x0.50 m = 0.55 sqm
Total= 2.44 sqm
Deduct 2x0.20x0.20 m = (-) 0.08 sqm
Net qty= 2.36 sqm
nominal size)
Block = 1.92x0.23x0.15 = 0.07 cum
Rate as per item no. 4.2.3 of SH:Concrete work cum 0.07 3 579.10 250.54
R.C.C. 1:2:4 (1 cement: 2 coarse sand : 4
graded stone aggregate 20 mm nominal size)
0.88x0.96x0.075 m = 0.063 cum Say 0.06
cum
R.C.C. 1:2:4 (1 cement: 2 coarse sand : 4
in lintels
1x0.96x0.20x0.20 m = 0.04 cum
Rate as per item no. 5.1.3 of SH : RCC work cum 0.04 6 002.80 240.11
Form work
Slab bottom 0.50x0.65 m = 0.325 sqm
Outer periphery 3.50x0.075 m = 0.263 sqm
2.20x0.15 m = 0.330 sqm
Total= 0.918 sqm Say 0.91 sqm
Mild steel reinforcement for R.C.C work
(0.06+0.04) = 0.10 cum @ 80 kg/cum = 8.00
kg
7380 Precast R.C.C.gully grating with frame each 1.00 533.00 533.00(A)
500x450 mm
9999 Carriage of R.C.C. grating L.S. 7.15 1.00 7.15(A)
7381 Precast R.C.C.grating 450x100 mm vertical each 1.00 250.00 250.00(A)
9999 Labour for fixing pre cast R.C.C. grating and L.S. 34.06 1.00 34.06
frame
TOTAL 4 139.18
TOTAL 4 147.42
on (A+B)
Say 4 272.30
1145
19.30 Constructing brick masonry chamber for underground C.I. inspection chamber
and bends with 75 class designation bricks in cement mortar 1:4 (1 cement : 4
coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions,
total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg
and weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement :2 coarse sand
: 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1
cement: 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside
plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished
smooth with a floating coat of neat cement on walls and bed concrete etc. complete
as per standard design :
19.30.1: Inside dimensions 455x610 mm and 45 cm deep for single pipe line :
19.30.1.1 With F.P.S. bricks
nominal size)
1.22mx1.065mx0.15m=0.195 cum Say 0.20 cum
Rate as per item no 4.1.11 SH: conerete work cum 0.20 2 079.60 415.92
3.05 m x 0.23m x0.30 m = 0.210 cum
Less pipe
2x3.14/4x(0.10)2x0.23 m = (-) 0.004 cum
cement
Wall: 2.13x0.30 m = 0.639 sqm
Bed : 0.61x0.455 m = 0.278 sqm
Total= 0.917 sqm
Less pipe 2x3.14/4x(0.10)2= (-) 0.016 sqm
Rate as per item13.9.1 of SH : Finishing sqm 0.90 112.80 101.52
nominal size)
3.05x0.23x0.15 = 0.105 cum say 0.11 cum
Form work
1354 C.I. Cover with frame 455x610 mm each 1.00 1395.00 1 395.00(A)
9999 Carriage of C.I.cover and frame L.S. 7.15 1.00 7.15(A)
9999 Painting of C.I. Cover and frame with coal tar L.S. 7.15 1.00 7.15(A)
9999 Sundries L.S. 13.52 1.00 13.52(A)
TOTAL 2 916.59
TOTAL 2 930.82
on (A+B)
Say 3 146.40
1146
and weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement :2 coarse
sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10
(1 cement: 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside
smooth with a floating coat of neat cement on walls and bed concrete etc.
19.30.2 Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two
inlets :

nominal size)
1.31mx1.11rnx0.15 m= 0.22 cum
Brick work in oncks of clas designation 75 in
3.32 m x 0.23m x0.30 m = 0.229 cum
Less pipe
3x3.14x(0.10)2x0.23 m = (-) 0.005 cum
sand) finished with floating coat of neat cement
Wall: 2.40x0.30 m = 0.72 sqm
Bed : 0.70x0.50 m = 0.35 sqm
= 1.07 sqm
Less pipe 3x3.14/4x(0.10)2= (-) 0.02 sqm
Net qty= 1.05 sqm
R.C.C 1:2:4 ( 1 cement: 2 coarse sand : 4
1.16x0.96x0.15 = 0.167 cum
Deduct cover
0.61x0.45x0.15 m = (-) 0.042 cum
Form work
Inside area of chamber : 0.70x0.50 m = 0.35 sqm
= 0.95 sqm
Deduct cover : 0.61x0.455 m = (-) 0.278 sqm
= 0.672 sqm Say 0.67 sqm
M.S.reinforcement for slab
0.13 cum @ 48.06 kg/cum = 6.25 kg
1147
1354 C.I. Cover with frame 455x610 mm each 1.00 1 395.00 1 395.00(A)
9999 Carriage of C.I. Cover and frame L.S. 7.15 1.00 7.15(A)
9999 Sundries L.S. 13.52 1.00 13.52(A)
TOTAL 3361.17
TOTAL 3375.40
on (A+B)
Say 3 590.95
and weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement :2 coarse
sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10
(1 cement: 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside
smooth with a floating coat of neat cement on walls and bed concrete etc.
19.30.3 Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more
inlets :
Details of cost of one chamber
nominal size)
1.46rnxl.21mx0.15 m= 0.26 cum
Brick work in oncks of clas designation 75 in
3.82 m x 0.23m x0.30 m = 0.26 cum
Less pipe
5x3.14/4x(0.10)2x0.23 m = (-) 0.009 cum
cement
Wall: 2.90x0.30 m = 0.87 sqm
Bed : 0.85x0.60 m = 0.51 sqm
= 1.38 sqm
Less pipe 5x3.14/4x(0.10)2= (-) 0.04 sqm
Net qty = 1.34 sqm
Rate as per item no 13.9.1 SH : Finishing sqm 1.34 112.80 151.15
R.C.C 1:2:4 ( 1 cement: 2 coarse sand : 4
1.31x1.06x0.15 = 0.208 cum Deduct cover
0.61x0.455x0.15 m = (-) 0.042 cum
1148

Form work
Inside area of chamber : 0.85x0.60 m = 0.511
sqm
Outer periphery 4.50x0.15 m = 0.675 sqm =
Total 1.186 sqm
Deduct cover : 0.61x0.455 m = (-) 0.278 sqm
Net qty= 0.908 sqm Say 0.91 sqm
M.S.reinforcement for slab for 0.17 cum @
48.06 kg/cum
= 48.06x0.17cum = 8.17kg
1354 C.I. Cover with frame 455x610 mm each 1 1 395.00 1 395.00(A)
9999 Carriage of C.I. Cover and frame L.S. 7.15 1.00 7.15(A)
9999 Sundries L.S. 13.52 1.00 13.52(A)
TOTAL 3 838.72
TOTAL 3 852.95
on (A+B)
Say 4 068.50
19.31 Extra for depth beyond 45 cm of brick masonry chamber :

19.31.1 For 455x610 mm size

3.05 x 0.23m x 1.00m = 0.70 cum
Rate as per item no. 6.1.1 cum 0.70 2 293.40 1 605.38
12mm cement plaster1:3 (1 cement: 3 coarse
sand finished with floating coat of neat cement
Wall: 2.13x1.00 m = 2.13 sqm
TOTAL 1 845.64
Say 1 845.65
1149
19.31.2 For 500x700 mm size
3.32 x 0.23m x 1.00m = 0.76 cum
12mm cernem plaster1:3 (1 cement: 3 coarse
sand) finished with floating coat of neat cement
Wall: 2.40x1.00 m = 2.40 sqm
TOTAL 2 013.70
Say 2 013.70

19.31.3 For 600x850 mm size

cement mortar 1:4 ( 1 cement: 4 coarse sand)
3.82 m x 0.23m xl.00 m = 0.88 cum
sand finished with floating coat of neat cement
Wall : 2.90x1.00 m = 2.90 sqm
TOTAL 2 345.31
Say 2 345.30
19.32 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey
comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm
diameter, 1.8 m long complete as per standard design.
Details of cost for one soak pit
Earth work in excavation including disposal of
surplus earth 3.14/4x(2.5)2x3m = 14.73 cum
Rate as per item no. 2.8.1 of SH : Earth work cum 14.73 103.40 1 523.08(A)
= 3.14/4x(2.5)2 x 1.5 m = 7.37 cum
Rate as per item no. 2.26.1 of SH : Earth work cum 7.37 18.90 139.29(A)
2nd class bricks
perimetre = 4x0.35 =1.40 m
Area = 1.40x2.925 m = 4.1 sqm
Number of brick = 4.1 x487x0.066 =131.78
Wastage 10%= 13.718
2602 Total= 144.96 Say 145 numbers 1000 Nos 145.00 1 900.00 275.50
Brickbats = 3.14/4x(1.2)2x2.925m =3.33 cum
Deduct = 0.45x0.45x2.925 m = 0.59 cum
0362 Net qty= 2.74 cum ‘ cum 2.74 253.00 693.22
1150

Brick aggregate 50 to 80 mm nominal size
0285 = 3.14x1.50x0.03x2.925 m = 4.13 cum cum 4.13 350.00 1 445.50
Brick aggregate 40 mm nominal size
0287 = 3.14x2.15x0.35x2.925 m =6.91 cum cum 6.91 360.00 2 487.60
1854 100 mm diametre S.W. pipes ( 60 cm long) each 3.00 30.00 90.00
Carriage of brick bats and aggregate
2260 (2.74+4.13+6.91) cum = 6.25 sqm cum 13.78 57.83 796.90
2201 Carriage of bricks 1000Nos 145.00 141.88 20.57
9999 Single matting 2.5x2.5 m = 6.25 sqm L.S. 112.14 1.00 112.14
Precast R.C.C.slabs 7.5 cm thick in cement
concrete 1:2:4 (1 cement: 2 coarse sand : 4
0.45x0.45x0.075 m = 0.02 cum
Rate as per item no 5.12 of SH : RCC work cum 0.02 4 882.25 97.64(B)
Reinforcement @ 80 kg/cum = 0.02x80 =1.6
kg
Rate as per item no. 5.22.1 of SH : RCC work kg 1.60 41.50 66.40(B)
2nd class brick edging laid length wise with
half brick depth.
3.14x2.6 m =8.17 m
Rate as per item no. 16.8.1 of SH : Road metre 8.17 14.90 121.73(B)
work
LABOUR
0114 Beldar Day 3.00 135.25 405.75
0115 Coolies Day 3.00 135.25 405.75
TOTAL 8 827.62
Add 1% for water charges on all except on 68.79
(A+B)
TOTAL 8 896.41
on all except on (A+B)
Cost of one soak pit 9 938.65
Say 9 938.65
19.33 Constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain
pipe 100 mm diameter and 1.20 m long complete as per standard design.
Details of cost for one soak pit
Earth work in excavation including disposal of
surplus earth 1.2x1.2x1.2m = 1.73 cum
Rate as per item no. 2.8.1 of SH : Earth work cum 1.73 103.40 178.88(A)
Brick bats
0362 1.2x12x1.2 m = 1.73 cum cum 1.73 253.00 437.69
2260 Carriage of brickbats cum 1.73 57.83 100.05
Second class brick edging laid length wise
with half brick depth
Rate as per item no. 16.8.1 of SH : Road meter 5.20 14.90 77.48(A)
work
1854 S.W. pipe 100 mm diameter (60 cm long) each 2.00 30.00 60.00
Single matting
9999 1.2x1.2 m= 1.44 sqm L.S. 25.84 1.00 25.84
1151

LABOUR
For filling brick bats
0114 Beldar Day 0.50 135.25 67.62
9999 Sundries L.S. 13.50 1.00 13.52
TOTAL 961.08
Add 1% for water charges on all except on 7.05
(A)
TOTAL 968.13
on all except on (A)
Cost of one soak pit 1 074.90
Say 1 074.90
19.34 Providing and fixing S.W. intercepting trap in manholes with stiff mixture of cement
mortar 1:1 (1 cement: 1 fine sand) including testing of joints etc. complete :
19.34.1 100 mm dia
MATERIALS
7128 S.W intercepting trap 100 mm dia each 1.0 144.00 144.00
9999 Carriage of trap L.S. 1.04 1.00 1.04
0367 Cement for one joint tonne 0.0013 4 500.00 5.85
0983 Fine sand cum 0.001 320.00 0.32
LABOUR
0114 Beldar Day 0.06 135.25 8.12
0101 Bhisti Day 0.02 138.45 2.77
TOTAL 170.77
TOTAL 172.48
Say 198.35
19.34 Providing and fixing S.W. intercepting trap in manholes with stiff mixture of cement
mortar 1:1 (1 cement: 1 fine sand) including testing of joints etc. complete :
19.34.2 150 mm dia
MATERIALS
7129 S.W. iintercepting trap 150mmdia each 1.00 202.00 202.00
9999 Carriage of trap L.S. 2.08 1.00 2.08
0367 Cement for one joint tonne 0.0019 4 500.00 8.55
2209 Cement for one joint
0983 Fine sand cum 0.0014 320.00 0.45
1152

LABOUR
0114 Beldar Day 0.08 135.25 10.82
0101 Bhisti Day 0.03 138.45 4.15
TOTAL 242.40
TOTAL 244.82
Say 281.55
1153
SUB HEAD : 20.0

PILE WORK
1155
20.1 Providing, driving and installing driven cast-in-situ reinforced cement concrete piles
of specified diameter and length below the pile cap M 35 in cement concrete, to carry
safe working load not less than specified, excluding the cost of steel reinforcement
but including the cost of shoe and the length of pile to be embedded in the pile cap
etc. all complete. (Length of pile for payment shall be measured from top of shoe to
the bottom of pile cap):
20.1.1 400 mm dia piles
Details of cost for 20 m length of pile
MATERIAL
Concrete -3.14/4x0.402x20 = 2.51 cum
(A) Rate as per item No. 5.33 of SH : RCC work cum 2.51 4147.40 10409.97
(A) Rate as per Item No 5.34.2 S.H.: R.C.C. work cum 2.51 98.20 246.48
9999 Sundries L.S. 521.08 1.00 521.08
C.I. Shoes @ 80 kg per pile Kilogram 80.00 40.00 3200.00
7182 M.S. clamps for shoes @ 35 kg per pile Kilogrsm 35.00 35.00 1225.00
MACHINERY
0024 Hire and running charges of hydraulic piling Hour 0.36 28000.00 10080.00
rig with power unit etc. including complete
accessories and shifting at site.
0025 Hire and running charges of light crane. Hour 0.06 2000.00 120.00
LABOUR
Work supervisor (Mistri) Day 0.08 151.50 12.12
Beldar Day 2.00 135.25 270.50
TOTAL 26085.15
TOTAL 26239.44
except on (A)
Cost for 20 metre pile 28576.89
Say 1428.85
of specified diameter and length below the pile cap M 35 in cement concrete, to
carry safe working load not less than specified, excluding the cost of steel
reinforcement but including the cost of shoe and the length of pile to be embedded
in the pile cap etc. all complete. (Length of pile for payment shall be measured from
top of shoe to the bottom of pile cap):

MATERIAL
Concrete -3.14/4x0.452x20 = 3.18 cum
(A) Rate as per item No 5.33 of SH : RCC work cum 3.18 4147.40 13188.73
(A) Rate as per Item No 5.34.2, S.H.: R.C.C. work cum 3.18 98.20 312.28
9999 Sundries L.S. 392.70 1.00 392.70
7181 C.I. Shoes @ 80 kg per pile kilogram 80.00 40.00 3200.00
7182 M.S. clamps for shoes @ 35 kg per pile kilogram 35 .00 35.00 1225.00
MACHINERY
0024 Hire and running charges of hydraulic piling hour 0.48 28000.00 13440.00
0025 Hire and running charges of light crane. hour 0.06 2000.00 120.00
1156
LABOUR
0130 Work supervisor (Mistri) Day 0.08 151.50 12.12
0114 Beldar Day 2.00 135.25 270.50
TOTAL 32161.33
TOTAL 32347.93
except on (A)
Cost for 20 metre pile 35 174.97
Say 1 758.75

MATERIAL
Concrete 3.14/4x0.502x20 = 3.925 cum
(A) Rate as per item No 5.33.1 of SH : RCC work. cum 3.925 4147.40 16378.55
(A) Rate as per Item No 5.34.2 of S.H.: R.C.C. work. cum 3.925 98.20 385.44
9999 Sundries L.S. 530.00 1.00 530.00
7182 M.S. clamps for shoes @ 35 kg per pile kilogram 35.00 35.00 1225.00
MACHINERY
LABOUR
0114 Beldar Day 2.00 135.25 270.50
TOTAL 38821.61
TOTAL 39043.19
except on (A)
Say 2120.00
1157
top of shoe to the bottom of pile cap) :
MATERIAL
Concrete 3.14/4x0.552x20 = 4.75 cum
9999 Sundries L.S. 371.88 1.00 371.88
7181 C.I. Shoes @ 80 kg per pile kilogram 80.00 40.00 3 200.00
7182 M.S. clamps for shoes @ 35 kg per pile kilogram 35.00 35.00 1 225.00
MACHINERY
LABOUR
0114 Beldar Day 2.00 135.25 270.50
TOTAL 42166.10
TOTAL 42386.10
except on (A)
Say 2 285.95
20.1.5 750 mm dia piles.

MATERIAL
Concrete 3.14/4x0.752x20 = 6.62 cum
(A) Rate as per Item No 5.34.2 S,H.: R.C.C. work cum 6.62 98.20 650.08
9999 Sundries L.S. 573.57 1.00 573.57
7181 C.I. Shoes @ 80 kg per pile Kilogram 80.00 40.00 3200.00
7182 M.S. clamps for shoes @ 35 kg per pile Kilogram 35.00 35.00 1225.00
MACHINERY
1158
LABOUR
0114 Belder Day 3.50 135.55 473.38
TOTAL 53319.03
TOTAL 53571.16
except on (A)
Say 3826.05

MATERIAL
Concrete 3.14/4x1.002x10 = 7.85 cum
(A) Rate as per item No. 5.33 of SH:RCC work Cum 7.85 4147.40 32557.59
(A) Rate as per Item No-5.34.2; S.H.: R.C.C. work cum 7.85 98.20 770.87
9999 Sundries L.S. 897.89 1.00 897.89
7182 M.S. clamps for shoes @ 35 kg per pile kilogram 35.00 35.00 1225.00
MACHINERY
LABOUR
0114 Beldar Day 4.10 135.25 541.00
TOTAL 58376.09
TOTAL 58626.57
except on (A)
Say 6 242.15
1159

MATERIAL
Concrete 3.14/4x1.22x9 =10.17cum
(A) Rate as ner item No 5.33 of SH : RCC work cum 10.17 4147.40 42179.06
9999 Sundries L.S. 733.37 1.00 733.37
7181 a) C.I. Shoes @ 80 kg per pile kilogram 80.00 40.00 3200.00
7182 b) M.S. clamps for shoes @ 35 kg per pile kilogram 35.00 35.00 1225.00
MACHINERY
LABOUR
0114 Beldar Day 4.50 135.25 608.62
TOTAI 67852.01
Add 1% for water charges except on (A) 246.74
TOTAL 68098.75
except on (A)
Say 7981.90

MATERIAL
Concrete 3.14/4x1.52 x9 =15.90 cum
(A) Rate as per item No. 5.33 of SH:RCC work. cum 15.9 4147.40 65943.66
(A) Rate as per Item No 5.34.2 S.H.:R.C.C. work. cum 15.9 98.20 1561.38
9999 Sundries L.S. 1113.48 1.00 1113.48
7181 (a) C.I. Shoes @ 80 kg per pile kilogram 80.00 40.00 3200.00
7182 (b) M.S. clamps for shoes® 35 kg per pile kilogram 35.00 35.00 1225.00
MACHINERY
1160
LABOUR
0114 Beldar Day 5.00 135.25 676.25
total 95510.07
TOTAL 95790.12
except on (A)
Say 11 114.75
20.2 Boring, providing and installing bored cast-in-situ reinforced cement concrete pile
carry a safe working load not less than specified, excluding the cost of steel
reinforcement but including the cost of boring with, bentonite solution and temporary
casing of appropriate length for setting out and removal of same and the length of
the pile to be embedded in the pile cap etc. all complete, including removal of excavated
earth with all lifts and leads (Length of pile for payment shall be measured upto
bottom of pile cap).

MATERIAL
Concrete 3.14/4x0.302x20 = 1.41 cum
7183 Bentonite. tonne 0.16 2700.00 432.00
9999 Sundries L.S. 289.85 1.00 289.85
MACHINERY
0026 Hire and running charges of bentonite pump. hour 0.38 4000.00 1520.00
0018 Hire and running charges of loader. Day 0.30 800.00 240.00
0017 Hire and running charges of tipper Day 0.30 1030.00 309.00
LABOUR
0114 Beldar Day 2.00 135.25 270.50
TOTAL 19265.82
TOTAL 19398.62
except on (A)
Say 1070.50
1161

MATERIAL
Concrete 3.14/4x0.402x20 = 2.51 cum
7183 Bentonite tonne 0.225 2700.00 607.50
9999 Sundries L.S. 79.06 1.00 79.06
MACHINERY
LABOUR
0114 Beldar Day 2.00 135.25 270.50
TOTAL 23900.69
TOTAL 24033.13
except on (A)
Say 1 302.00

MATERIAL
Concrete 3.14/4x0.452x20 = 3.18 cum
7183 Bentonite tonne 0.25 2 700.00 675.00
1162
9999 Sundries L.S. 230.69 1.00 230.69
MACHINERY
0025 Hire and running charges of light crane. hour 0.63 2 000.00 120.00
0026 Hire and running charges of bentonite pump. hour 0.38 4 000.00 1520.00
0017 Hire and running charges of tipper Day 0.30 1 030.00 309.00
Labour
0114 Beldar Day 2.50 135.25 338.12
TOT AT 31252.00
TOTAL 31429.51
except on (A)
Say 1 705.95
20.2.4 500 mm dia. piles

MATERIAL
Concrete 3.14/4x0.502 = 3.925 cum
(A) Rate as per item No 5.33 of SH :RCC work cum 3.925 4147.40 16278.55
7183 Bentonite tonne 0.28 2700.00 756.00
9999 Sundries L.S. 87.95 1.00 87.95
MACHINERY
LABOUR
Beldar Day 2.50 135.25 338.12
TOTAL 36853.24
TOTAL 37055.89
except on (A)
Say 2005.70
1163
MATERIAL
Concrete 3.14/4x0.602x20= 5.65 cum
(A) Rate as per item No fr.42.-Tof SH : RCC work cum 5.65 4147.40 23432.81
7183 Bentonite tonne 0.33 2700.00 891.00
9999 Sundries L.S. 317.43 1.00 317.43
MACHINERY
0026 Hire and running charges of bentonite pump. hour 0.38 4 000.00 1 520.00
LABOUR
0114 Beldar Day 3.00 135.25 405.75
TOTAL 47409.00
TOTAL 47643.21
except on (A)
Say 2 559.60

MATERIAL
Concrete 3.14/4x0.752xl5 = 6.62 cum
(A) Rate as per item No5.33 of SH : RCC work cum 6.62 4147.40 27455.79
7183 Bentonite tonne 0.30 2 700.00 810.00
1164
9999 Sundries L.S. 131.58 1.00 131.58
MACHINERY
0026 Hire and running charges of bentonite pump. hour 0.75 4 000.00 3 000.00
LABOUR
0114 Beldar Day 3.50 135.25 473.38
TOTAL 52811.04
TOTAL 53.58.09
except on (A)
Say 3786.75

MATERIAL
Concrete 3.14/4x1.002x10 = 7.85 cum
7183 Bentonite tonne 0.35 2700.00 945.00
9999 Sundries L.S. 175.89 1.00 175.89
MACHINERY
0026 Hire and running charges of bentonite pump. hour 0.75 4000.00 3 000.00
LABOUR
0114 Beldar Day 4.00 135.25 541.00
TOTAL 58186.09
TOTAL 58434.67
except on (A)
Say 6 220.05
1165
MATERIAL
Concrete 3.14/4x1.202x9 =10.17 cum
(A) Rate as per item No. 5.33 of SH : RCC work cum 10.17 4147.40 42179.06
(A) Rate as per Item No. 5.44.2, S.H.: R.C.C. work cum 10.17 98.20 998.69
7183 Bentonite tonne 0.385 2700.00 1 039.50
9999 Sundries L.S. 290.79 1.00 290.79
MACHINERY
LABOUR
0114 Beldar Day 4.50 135.25 608.62
TOTAL 67938.93
TOTAL 68186.58
except on (A)
Say 7 993.15
bottom of pile cap

MATERIAL
Concrete 3.14/4x1.502x9 = 15.90 cum
(A) Rate as per item No. 5.33 SH : RCC work cum 15.90 4147.40 65943.66
(A) Rate as per Item No. 5.44.2, S.H.: R.C.C. work cum 15.90 98.20 1561.38
7183 Bentonite tonne 0.45 2700.00 1215.00
1166
9999 Sundries L.S. 1.00 593.48 593.48
MACHINERY
0026 Hire and running charges of bentonite pump. hour 0.96 4000.00 3 600.00
LABOUR
0114 Beldar Day 5.00 135.25 676.25
TOTAL 96760.15
TOTAL 97052.70
except on (A)
Say 11 276.10
20.3 Boring, Providing and installing cast in situ single under reamed piles of specified
diameter and length below pile cap in M 35 cement concrete, to carry a safe working
load not less than specified, excluding the cost of steel reinforcement but including
the cost of boring with bentonite solution and the length of the pile to be embedded
in pile cap etc. all complete. (Length of pile for payment shall be measured upto the
bottom of pile cap):

MATERIAL
R.C.C
Stem -3.14/4x(0.30)2x9.625 = 0.680 cum
Bulb -3.14/4x(0.75)2x0.075 = 0.033 cum
2x 3.14/4x(0.525)2x0.150 = 0.065 cum
=0.778 cum
7183 Bentonite tonne 0.08 2700.00 216.00
9999 Sundries L.S. 410.92 1.00 410.92
MACHINERY
LABOUR
0114 Beldar Day 2.00 135.25 270.50
TOTAL 14432.62
TOTAL 14543.92
except on (A)
Say 1623.00
1167
in pile cap etc. all complete. (Length of pile for payment shall be measured upto to
the bottom of pile cap).

MATERIAL
R.C.C
Stem -3.14/4x(0.40)2x9.30 = 1.169 cum
Bulb -3.14/4x(1.00)2x0.1 = 0.079 cum
2x 3.14/4x(0.7)2x0.30 = 0.23 cum
= 1.478 cum
(A) Rate as per item No 5.33 SH : RCC work cum 1.478 4147.40 6129.86
7183 Bentonite tonne 0.15 2700.00 405.00
9999 Sundries L.S. 276.82 1.00 276.82
MACHINERY
LABOUR
0114 Beldar Day 2.00 135.25 270.50
TOTAL 17519.44
TOTAL 17631.88
except on (A)
Say 1933.55

MATERIAL
R.C.C
Stem -3.14/4x(0.45)2x9.212 = 1.465 cum
Bulb -3.14/4x(1.125)2x0.113 = 0.112 cum
2x 3.14/4x(0.788)2x0.337 =0.329 cum
= 1.906 cum
1168
7183 Bentonite tonne 0.19 2 700.00 513.00
9999 Sundries L.S. 194.81 1.00 194.81
MACHINERY
LABOUR
0114 Beldar Day 2.00 135.25 270.50
TOTAL 19362.54
TOTAL 19475.24
except on (A) 21182.71
Say 2118.25
MATERIAL
R.C.C
Stem -3.14/4x(0.50)2x9.125 = 1.792 cum
Bulb -3.14/4x(1.25)2x0.125 = 0.153 cum
2x 3.14/4x(0.875)2x0.375 = 0.451 cum
= 2.396 cum
7183 Bentonite tonne 0.20 2 700.00 540.00
9999 Sundries L.S. 208.15 1.00 208.15
MACHINERY
LABOUR
0114 Beldar Day 2.00 135.25 270.50
TOTAL 21500.21
TOTAL 21613.32
except on (A)
Cost tor 10 metre pile 23326.90
Say 2332.70
1169
20.4 Extra over item No. 20.3 for providing additional bulb in under reamed piles, under
specified diameter (Only the quantity of extra bulbs are to be paid).
20.4.1 300mm dia piles.

Details of cost for 1 bulb.
Materials :
Bulb - 0.033 cum
7183 Bentonite tonne 0.003 2700.00 8.10
Machinery
Labour
0130 Work supervisior (Mistry) Day 0.02 151.50 3.03
0114 Beldar Day 1.00 135.25 135.25
Total 906.48
Total 914.14
except on (A).
Cost for 1 bulb 1030.25
Say 1030.25
20.4.2 400mm dia piles.

Details of cost for 1 bulb.
Materials:
Bulb - 0.063 cum
(A) Rate as per item No 5.33 of SH:RCC work cum 0.063 4147.40 261.29
(A) Rate as per Item No-5.34.2, S.H.: R.C.C. work cum 0.063 98.20 6.19
7183 Bentonite tonne 0.006 2700.00 16.20
Machinery
Labour
0114 Beldar Day 1.00 135.25 135.25
Total 1041.96
Total 1049.70
except on (A).
Say 1167.00
1170

Details of cost for 1 bulb. Materials :
Bulb-0.081 cum
7183 Bentonite tonne 0.008 2700.00 21.60
Machinery
Labour
0114 Beldar Day 1.00 135.25 135.25
Total 1123.77
Total 1131.52
except on (A).
Say 1149.70

Details of cost for 1 bulb. Materials :
Bulb-0.102 cum
(A) Rate as per item No-5.33 SH : RCC work cum 0.102 4147.40 423.03
7,183 Bentonite tonne 0.01 2700.00 27.00
Machinery
Labour
0114 Beldar Day 1.00 135.25 135.25
Total 1258.33
Total 1266.58
except on (A).
Say 1391.60
1171
20.5 Providing, driving and installing driven Pre-cast reinforced cement concrete piles
of specified diameter and length below the pile cap in M 35 cement concrete to carry
safe working load not less than specified. With a central through preformed hole
with M.S. black pipe of dia 40mm for grouting with cement sand grouting of mix
1:2(1 cement: 2 coarse sand) under sufficient positive pressure to ensure complete
filling including centring, shuttering, driving and removing the steel casing pipe
and lifting casing etc. complete but excluding the cost of steel reinforcement. (Length
of pile for payment shall be measured from top of the shoe to the bottom of pile
cap).

MATERIAL
Concrete -3.14/4x(0.40)2x20 = 2.51 cum
(A) Rate as per item no 5.33 SH : RCC work cum 2.51 4147.40 10409.97
(A) Rate as Per Item no.5.34.2 S.H.: R.C.C. work cum 2.51 98.20 246.48
(A) Add Rate as per item no 5.19 SH : RCC work cum 2.51 4953.50 12433.29
(A) Deduct Rate as per item no 5.1.3 SH : RCC work cum 2.51 3359.60 (-) 8432.60
Cement mortar 1:2 for grout(Rate as per item3.7) cum 0.025 3864.25 96.61
9999 Sundries L.S. 442.00 1.00 442.00
7182 M.S. shoes® 35 kg per pile Kilogram 35.00 35.00 1225.00
MACHINERY
0027 Hire and running charges of vibrating pile hour 0.38 28000.00 10640.00
driving hammer complete with power unit and
accessories .
0028 Hire and running charges of crane 20 tonne hour 0.06 8000.00 480.00
capacity.
LABOUR
0114 Beldar Day 3.00 135.25 405.75
TOTAL 31164.80
TOTAL 31329.96
except on (A)
Say 1691.55
with M.S. black pipe of dia 40mm for grouting with cement sand grouting of mix 1:2
(1 cement: 2 coarse sand) under sufficient positive pressure to ensure complete
cap).

MATERIAL
Concrete -3.14/4x(0.45)2x20 = 3.18 cum
1172
(A) Rate as per Item no 5.34.2 S.H.: R.C.C. work cum 3.18 98.20 312.28
(A) Deduct Rate as per item no 5.1.3 SH : RCC work cum 3.18 3359.60 (-) 10683.53
Cement mortar 1:2 for grout cum 0.025 3864.25 96.61
9999 Wooden block @ 1 block per two piles L.S. 442.00 1.00 442.00
Pile shoes
7182 M.S. shoes @ 35 kg per pile kilogram 35.00 35.00 1 225.00
MACHINERY
accessories.
capacity.
LABOUR
0114 Beldar Day 10.78 135.25 1458.00
TOTAL 36274.84
TOTAL 36451.89
except on (A)
Say 1956.70
with M.S. black pipe of dia, 40mm for grouting with cement sand grouting of mix 1:2
cap).

MATERIAL
Concrete -3.14/4x(0.50)2x20 = 3.925 cum
(A) Rate as per item no 5.33 SH : RCC . work cum 3.925 4147.40 16278.55
(A) Rate as per Item no 5.34.2. S.H.: R.C.C. work cum 3.925 98.20 385.44
(A) Add Rate as per item no 5.19 SH : RCC . work cum 3.925 4953.50 19442.49
(A) Deduct Rate as per item no 5.1.3 SH : RCC . work cum 3.925 3359.60 (-) 13186.43
Pile shoes
7182 M.S. shoes @ 35 kg per pile Kilogram 35.00 35.00 1225.00
MACHINERY
accessories.
1173
capacity.
LABOUR
0114 Beldar Day 3.00 135.25 405.75
TOTAL 39427.59
TOTAL 39592.69
except on (A)
Say 2104.70
cap).
MATERIAL
(A) Concrete -3.14/4x(0.55)2x20 = 4.75 cum
Deduct Rate as per item no 5.1.3 SH : RCC work cum 4.75 3359.60 (-) 15958.10
Pile shoes
7182 M.S. shoes @ 35 kg per pile Kilogram 35.00 35.00 1225.00
MACHINERY
accessories.
capacity.
LABOUR
0114 Beldar Day 3.00 135.25 405.75
TOTAL 44245.17
TOTAL 44410.25
except on (A)
Say 2345.55
1174
with M.S. black pipe of dia 40mm for grouting with cement sand grouting of mix 1:2
cap).
MATERIAL
Concrete -3.14/4x(0.75)2x20 = 10.88 cum
(A) Deduct Rate as per item no 5.1.3 SH : RCC work cum 10.88 3 359.60 (-) 36552.45
Cement mortar 1:2 for grout cum 0.025 3 864.25 96.61
Pile shoes
7182 M.S. shoes @ 35 kg per pile kilogram 35.00 35.00 1 225.00
MACHINERY
0027 Hire and running charges of vibrating pile hour 0.38 28 000.00 10640.00
accessories .
0028 Hire and running charges of crane 20 tonne hour 0.06 8 000.00 480.00
capacity.
LABOUR
0114 Beldar Day 3.00 135.25 405.75
TOTAL 80,041.30
TOTAL 80206.38
except on (A)
Say 4135.35
filling including centrings shuttering, driving and removing the steel casing pipe
cap).
MATERIAL
Concrete -3.14/4x(1.00)2x20 =15.70 cum
1175
(A) Rate as per item no SH : RCC work cum 15.70 4147.40 65114.18
(A) Rate as per Item no S.H.: R.C.C. work cum 15.70 98.20 1541.74
(A) Deduct Rate as per item no 5.J.3 SH : RCC work cum 15.70 3359.60 (-) 52745.72
Pile shoes
7182 M.S. shoes @ 35 kg per pile kilogram 35.00 35.00 1225.00
MACHINERY
accessories .
capacity.
LABOUR
0114 Beldar Day 3.00 135.25 405.75
TOTAL 110747.69
TOTAL 110938.37
except on (A)
Cost for 20 metre pile
Say 5691.36
20.6 Vertical load testing of piles in accordance with IS 2911 (Part IV) including installation
of loading platform and preparation of pile head or construction of test cap and
dismantling of test cap after test etc. complete as per specification & the direction
of Engineer in-charge.
20.6.1 Single pile upto 50 tonne capacity
20.6.1.1 Initial test.
Details of cost for 1 test
7246 Cost per test Per test 1.00 19500.00 19500.00
TOTAL 19500.00
TOTAL 19695.00
Cost per test 22649.25
Say 22649.20
of Engineer in-charge.
20.6.1 Single pile upto 50 tonne capacity
20.6.1.2 Routine test
7249 Cyclic verticle load testing of piles in per test 1.00 11500.00 11500.00
accordance with IS : 2911 (Part-IV) including
prepration of pile head etc. for Single pile
upto 50 tonne capacity
1176
TOTAL 11 500.00
TOTAL 11615.00
Cost per test 13 357.25
Say 13 357.20
of Engineer-in-charge.
20.6.2 Single pile above 50 tonne and upto 100 tonne capacity
20.6.2.1Initial test

7247 Cost per test per test 1.00 27500.00 27500.00
TOTAL 27500.00
TOTAL 27775.00
Say 31941.20
20.6.2 Single pile above 50 tonne and upto 100 tonne capacity
20.6.2.2 Routine test.

prepration of pile head etc. forSingle pile
above 50 tonne capacity pile and upto 100
tonne capacity pile
TOTAL 18000.00
TOTAL 18180.00
Say 20907.00
1177
20.6.3 Group of two or more piles upto 50 tonne capacity
20.6.3.1 Initial test

TOTAL 37 500.00
TOTAL 37875.00
Say 43556.20
20.6.3 Group of two or more piles upto 50 tonne capacity
20.6.3.2 Routine test

TOTAL 23 000.00
TOTAL 23 230.00
Cost per test 26 714.50
Say 26 714.50
20.7 Cyclic vertical load testing of pile in accordance with IS Code of practice IS : 2911
(part IV) including preparation of pile head etc for.
20.7.1 Single pile.
20.7.1.1 Upto 50 tonne capacity pile.

7249 cost per test per test 1.00 11500.00 11500.00
TOTAL 11 500.00
TOTAL 11615.00
Say 13357.20
1178
20.7.1 Single pile.
20.7.1.2 Above 50 tonne and upto 100 tonne capacity pile.
prepration of pile head etc. forSingle pile
above 50 tonne capacity pile and upto 100
tonne capacity pile
TOTAL 18000.00
Add 1% for water charges’ 180.00
TOTAL 18180.00
Say 20907.00
20.7.2 Group of two piles.
20.7.2.1 Upto 50 tonne capacity each .
TOTAL 23000.00
TOTAL 23230.00
Say 26714.50
20.8 Lateral load testing of single pile in accordance with IS Code of practice IS : 2911
(Part IV) for determining safe allowable lateral load on pile :
20.8.1 Upto 50 tonne capacity pile.

TOTAL 11500.00
TOTAL 11615.00
Say 13357.20
20.8 Lateral load testing of single pile in accordance with IS Code of practice IS : 2911
(Part IV) for determining safe allowable lateral load on pile :
20.8.2 Above 50 tonne and upto 100 tonne capacity pile.

TOTAL 18000.00
TOTAL 18180.00
Say 20907.00
1179
SUB HEAD : 21.0

ALUMINIUM WORK
1181
21.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions
with extruded built up standard tubular sections/ appropriate Z sections and other
sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl
plugs and screws or with fixing clips, or with expansion hold fasteners including
necessary filling up of gaps at junctions, at top, bottom and sides with required
PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight,
mitred and jointed mechanically wherever required including cleat angle, Aluminium
snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete
as per architectural drawings and the directions of Engineer-in-charge. (Glazing
and panelling to be paid for separately):
21.1.1 For fixed portion.
21.1.1.1 Anodised aluminium (anodised transparent or dyed to required shade according
to IS: 1868, Minimum anodic coating of grade AC 15)
Details of cost for 40.02 kg
MATERIAL : Aluminium Section
(i) External member of the frame (Jindal
section no 4605)
V = 2x2.40 = 4.80 m
H = 2x3x0.95 = 5.70 m
= 10.50 m @ 1.653 kg/m = 17.36 kg
(ii) Internal member of the frame (Jindal
section no 4604)
V = 2x2.40 = 4.80 m
H = 1x3x0.95 = 2.85 m
= 7.65 m @ 1.692 kg/m = 12.94 kg
(iii) Aluminium snap beading on both side
(Jindal section no 4407)
2x6x2 (1.14+0.95) = 50.16 m
Snap beading = 50.16 m @ 0.176 kg/m = 8.33
kg
(iv) Angle cleat 38x38x4.8 mm 50 mm long
18x0.05 = 0.900 m @ 0.985 kg/m = 0.89 kg
Sub total =40.02 kg
7306 Total = 42.02 kg kilogram 42.02 195.00 8 193.90
0589 (v) C.P. brass /stainless steel screws 20 mm 100 Nos 72 63.00 45.36
for cleat angle 18x4 = 72 nos
7019 (vi) Dash hold fastners each 12 8.00 96.00
7389 (vii) Anodising kilogram 42.02 32.00 1344.64
9999 (viii) Carriage of material L.S. 52.00 1.00 52.00
LABOUR
For fabrication of frame
0116 Fitter Day 0.62 151.50 93.93
0139 Beldar (Special) Day 0.54 138.45 74.76
0114 Beldar Day 0.36 135.25 48.69
0100 Bandhani Day 0.04 138.45 5.54
9999 Labour for drilling holes, hire charges of drill, L.S. 52.00 1.00 52.00
electricity charges, carriage of dash hold
fastners & sundries
TOTAL 10 006.82
TOTAL 10 106.89
Cost for 40.02 kg 11622.92
Cost for 1 kg 290.43
Say 290.45
1182
sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs
and screws or with fixing clips, or with expansion hold fasteners including necessary
filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene
felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed
mechanically wherever required including cleat angle, Aluminium snap beading for
glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural
drawings and the directions of Engineer-in-charge. (Glazing and panelling to be
paid for separately):
2l.1.1 For fixed portion.
2.1.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron)

section no 4605)
V= 2x2.40 = 4.80 m
H = 2x3x0.95 = 5.70 m
= 10.50 m @ 1.653 kg/m = 17.36 kg
section no 4604)
V- 2x2.40 = 4.80 m
H= 1x3x0.95= 2.85 m
= 7.65 m @ 1.692 kg/m = 12.94 kg
2x6x2 (1.14+0.95) = 50.16 m
kg
18x0.05 = 0.900 m @ 0.985 kg/m = 0.89 kg
Sub total =40.02 kg
7306 Total = 42.02 kg Kilogram 42.02 195.00 8193.90
0589 (v) C.P. brass /stainless steel screws 20 mm 100 Nos 72 63.00 45.36
7019 (vi) Dash hold fastners each 12 8.00 96.00
7392 Epoxy powder coating 50 microns on Kilogram 42.02 45.00 1890.00
aluminium sections.
9999 (viii) Carriage of material L.S 52.00 1.00 52.00
LABOUR
0116 Fitter Day 0.62 151.50 93.93
0114 Beldar Day 0.36 135.25 48.69
0100 Bandhani Day 0.04 138.45 5.54
fastners & sundries
TOTAL 10553.08
TOTAL 10658.61
Cost for 40.02 kg 12257.40
Say 306.30
1183
21.1 Providing and fixing aluminium work for doors, windows, ventilators and
partitions with extruded built up standard tubular sections/ appropriate Z
sections and other sections of approved make conforming to IS: 733 and IS : 1285,
fixed with rawl plugs and screws or with fixing clips, or with expansion hold
fasteners including necessary filling up of gaps at junctions, at top, bottom and
sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth,
rust free, straight, mitred and jointed mechanically wherever required including
cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless
steel screws, all complete as per architectural drawings and the directions of
Engineer-in-charge. (Glazing and panelling to be paid for separately):
21.1.1 For fixed portion.
21.1.1.3 Polyester powder coated aluminium (minimum thickness of polyester powder
coating 50 micron)

section no 4605)
V= 2x2.40 = 4.80 m
H = 2x3x0.95 = 5.70 m
= 10.50 m @ 1.653 kg/m = 17.36 kg
section no 4604)
V= 2x2.40 = 4.80 m
H= 1x3x0.95= 2.85 m
= 7.65 m @ 1.692 kg/m = 12.94 kg
2x6x2 (1.14+0.95) = 50.16 m
kg
18x0.05 = 0.900 m @ 0.985 kg/m = 0.89 kg
Sub total =40.02 kg
0589 (v) C.P. brass /stainless steel screws 20 mm 100 Nos 72.0 63.00 45.36
7019 (vi) Dash hold fastners each 12.0 8.00 96.00
7393 Polyester powder coating 50 microns on Kilogram 42.02 50.00 2101.00
aluminium sections
9999 (viii) Carriage of material L.S. 52.00 1.00 52.00
LABOUR
0116 Fitter Day 0.62 151.50 93.93
0114 Beldar Day 0.36 135.25 48.69
0100 Bandhani Day 0.04 138.45 5.54
fastners & sundries
TOTAL 10763.18
TOTAL 10870.81
Add p6% for contractor’s profit and overheads 1630.62
Cost for 40.02 kg 12501.43
Say 312.40
1184
21.1.2 For shutters of doors, windows & ventilators including providing and fixing hinges/
pivots and making provision for fixing of fittings wherever required including the
cost of PVC / neoprene gasket required (Fittings shall be paid for separately).
21.1.2.1 Anodised aluminium (anodised transparent or dyed to required shade according
to IS: 1868, Minimum anodic coating of grade AC 15)

MATERIAL
(i) Hanging style (Jindal section no 4524)
1x2.35 = 2.35 m @ 2.53 kg/m = 5.95 kg
(ii) Meeting style (Jindal section no 4526)
1x2.35 = 2.35 m @ 2.465 kg/m = 5.79 kg
(iii) Top & bottom rail (Jindal section no
4510)
2x0.75 = 1.50 m @ 2.48 kg/m = 3.72 kg
(iv) Lock rail (Jindal section no 4524)
1x0.75 = 0.75 m @ 2.53 kg/m = 1.90 kg
(v) Glazing plate (Jindal section no 440) on
one side of lock rail
1x0.75 = 0.75 m @ 0.459 kg/m = 0.34 kg
(vi) Aluminium snap beading (Jindal section
no 4497) on both side
2x2 (0.75+1.26) = 8.04 m
2x2 (0.75+0.81) = 6.24 m
= 14.28 m @ 0.176 kg/m = 2.51 kg
(vii) Aluminium angle cleat 38x38x4.8 mm 35
mm long
3x4x0.035 = 0.42 m @ 0.985 kg/m = 0.41 kg
Sub total = 20.62 kg
0689 (viii) Aluminium hinges 100x75x4 mm 10 Nos 4.00 416.00 166.40
(ix) C.P. brass /stainless steel screws 20 mm
For cleat 12x4 = 48
For cleat 4x8 = 32
For glazing plate @ 15 cm centre to centre in
75 cm length 2x6 = 12
0589 Total = 92 nos 100 Nos 92.00 63.00 57.96
7389 (x) Anodising AC 15 kilogram 21.65 32.00 692.80
9999 (xi) Carriage of material L.S. 31.20 1.00 31.20
7390 (xii) Neoprene/ PVC gasket in groove of metre 2.35 22.00 51.70
meeting style
LABOUR
For fabrication
1185
0116 Fitter Day 0.32 151.50 48.48

0114 Beldar Day 0.18 135.25 24.34
0100 Bandhani Day 0.20 138.45 27.69
For fixing the shutter including hinges :
0114 Beldar Day 0.04 135.25 5.41
9999 Labour for making provision for fittings and L.S. 26.00 1.00 26.00
carriage of screws etc. including sundries
TOTAL 5 401.59
TOTAL. 5 455.61
Cost for 20.21 kg 6 273.95
Cost for lkg 310.44
Say 310.45
as per architectural drawings and the directions of Engineer- in-charge. (Glazing
21.1.2.2 Powder coated aluminium (minimum thickness of powder coating 50 micron)

MATERIAL
1x2.35 = 2.35 m @ 2.53 kg/m = 5.95 kg
1x2.35 = 2.35 m @ 2.465 kg/m = 5.79 kg
4510)
2x0.75 = 1.50 m @ 2.48 kg/m = 3.72 kg
1x0.75 = 0.75 m @ 2.53 kg/m = 1.90 kg
1x0.75 = 0.75 m @ 0.459 kg/m = 0.34 kg
2x2 (0.75+1.26) = 8.04 m
2x2 (0.75+0.81) = 6.24 m
= 14.28 m@ 0.176 kg/m = 2.51 kg
1186

mm long
3x4x0.035 = 0.42 m @ 0.985 kg/m = 0.41 kg
For cleat 12x4 = 48
For cleat 4x8 = 32
0589 Total = 92 nos 100 Nos 92.00 63.00 57.96
7392 (x) Expoxy powoder coating 50micron on Kilogram 21.65 45.00 974.25
aluminium section
meeting style
LABOUR
For fabrication
0116 Fitter Day 0.32 151.50 48.48
0114 Beldar Day 0.18 135.25 24.34
0100 Bandhani Day 0.20 138.45 27.69
For fixing the shutter including hinges:
0114 Beldar Day 0.04 135.25 5.41
TOTAL 5683.04
TOTjAt 5739.87
Addjfb% for contractor’s profit and overheads 860.98
Cost for 20.21 kg 6600.85
Say 326.60
21.1.2.3 Polyester powder coated aluminium (minimum thickness of polyester powder
coating 50 micron).
1187
MATERIAL
1x2.35 = 2.35 m @ 2.53 kg/m = 5.95 kg
1x2.35 = 2.35 m @ 2.465 kg/m = 5.79 kg
4510)
2x0.75 = 1.50 m @ 2.48 kg/m = 3.72 kg
1x0.75 = 0.75 m @ 2.53 kg/m = 1.90 kg
1x0.75 = 0.75 m @ 0.459 kg/m = 0.34 kg
2x2 (0.75+1.26) = 8.04 m
2x2 (0.75+0.81) = 6.24 m
= 14.28 m @ 0.176 kg/m = 2.51 kg
mm long
3x4x0.035 = 0.42 m @ 0.985 kg/m = 0.41 kg
For cleat 12x4 = 48
For cleat 4x8 = 32
0589 Total = 92 nos 100 Nos 92.0 63.00 57.96
7393 (X)Polyester powder coating 50 microns on Kilogram 21.65 50.00 1082.50
aluminium sections
meeting style
LABOUR
For fabrication
0116 Fitter Day 0.32 151.50 48.48
0114 Beldar Day 0.18 135.25 24.34
0100 Bandhani Day 0.20 138.45 27.69
For fixing the shutter including hinges :
0114 Beldar Day 0.04 135.25 5.41
TOTAL 5791.29
TOTAL 5 849.20
Cost for 20.21 kg 6 726.58
Say 332.85
1188
21.2 Providing and fixing 12mm thick prelaminated particle board flat pressed three
layer or graded wood particle board conforming to IS: 12823 Grade 1 Type II in
panelling fixed in aluminium doors, windows shutters and partition frames with
C.P. brass / stainless steel screws etc. complete as per architectural drawings and
directions of engineer-in-charge.
21.2.1 Pre-laminated particle board with decorative lamination on one side and balancing
lamination on other side.

MATERIAL
12 mm thick particle board = 7.00 sqm
Add 5% wastage = 0.35 sqm
7477 = 7.35 sqm sqm 7.35 595.00 4 373.25
9999 Carriage of particle board L.S 13.65 1.00 13.65
9999 Sundries & screws etc. L.S. 27.30 1.00 27.30
LABOUR:
0114 Beldar Day 1.00 135.25 135.25
TOTAL 4 676.89
TOTAL 4 723.66
Cost for 7 sqm 5 432.21
Say 776.05
21.2 Providing and fixing 12mm thick prelaminated particle board flat pressed three
layer or graded wood particle board conforming to IS: 12823 Grade 1 Type 11, in
panelling fixed in aluminium doors, windows shutters and partition frames with
C.P. brass / stainless steel screws etc. complete as per architectural drawings and
directions of engineer-in-charge.
21.2.2 Prelaminated particle board with decorative lamination on both sides.

MATERIAL
12 mm thick particle board = 7.00 sqm
Add 5% waistage = 0.35 sqm.
7480 Total =7.35 sqm sqm 7.35 625.00 4593.75
9999 Carriage of particle board L.S. 13.65 1.00 13.65
9999 Sundries & screws etc. L.S. 27.30 1.00 27.30
LABOUR:
0114 Beldar Day 1.00 135.25 135.25
TOTAL 4897.39
TOTAL- 4 946.36
Say 812.60
1189
21.3 Providing and fixing glazing in aluminium door, window, ventilator shutters and
partitions etc. with PVC/neoprene gasket etc. complete as per the architectural
drawings and the directions of engineer-in-charge . (Cost of aluminium snap
beading shall be paid in basic item):
21.3.1 With float glass panes of 4.0 mm thickness

MATERIAL
FloatGlass panes 4.00 mm thick 1.00 sqm
Add for waistage and brecakage 10%-0.10 sqm.
2406 Total =1.10 sqm. sqm 1.10 248.00 272.80
9999 Carriage of glass L.S. 2.42 1.00 2.42
7390 Neoprene/ PVC gasket metre 6.00 22.00 132.00
LABOUR:
0112 Glazier Day 0.23 141.00 32.57
0114 Beldar Day 0.23 135.00 31.11
9999 Sundries and carriage of gasket L.S. 6.89 1.00 6.89
TOTAL 477.79
TOTAL 482.57
Say 554.95
partitions etc. with PVC/neoprene gasket etc. complete as per the architectural
21.3.2 With float glass panes of 5.50 mm thickness

MATERIAL
Glass panes 5.50 mm thick = 1.00 sqm
Add for waistage and brcakge 10%= 0.10 sqm
2407 Total =1.00 sqm sqm 1.10 340.00 374.00
7390 Neoprene/ PVC gasket metre 6 .00 22.00 132.00
LABOUR:
0112 Glazier Day 0.23 141.60 32.57
0114 Beldar Day 0.23 135.25 31.11
TOTAL 579.90
TOTAL 585.70
Say 673.55
partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural
1190
21.3.3 With float glass panes of 8 mm thickness
MATERIAL
A Float Glass Pones 8.00 mm thick = 1.00 sqm
Add for waistage and brcakge 10%= 0.10 sqm
2406 Total =1.10 sqm sqm 1.10 248.00 272.80
7390 Neoprene/ PVC gasket metre 6.00 22.00 132.00
LABOUR:
0112 Glazier Day 0.23 141.60 32.57
0114 Beldar Day 0.23 135.25 31.11
TOTAL 478.70
TOTAL 483.49
Say 556.00
21.4 Providing and fixing double action hydraulic floor spring of approved brand and
manufacture IS : 6315 marked, for doors including cost of cutting floors as required,
embedding in floors and cover plates with brass pivot and single piece M.S. sheet
outer box with slide plate etc. complete as per the direction of Engineer-in-chargs.
21.4.1 With stainless steel cover plate
Details of cost for one number

MATERIAL
7394 Double action hydraulic floor spring with each 1.00 1 400.00 1400.00
sfainlessysteel cover plate
9999 Carriage L.S. 13.00 1.00 13.00
9999 Sundries and screws L.S. 26.00 1.00 26.00
Cement concrete 1:2:4
(A) (Rate as per item no 4.1.3 SH : CC) cum 0.002 3257.45 6.51
LABOUR:
For cutting hole and making it good
0112 Carpenter 2nd class for fixing Day 0.01 141.60 1.42
0114 Beldar Day 0.17 135.25 22.99
TOTAL 1493.37
TOTAL 1508.24
except on (A)
Cost for each 1733.50
Say 1733.50
21.4 Providing and fixing double action hydraulic floor spring of approved brand and
manufacture IS : 6315 marked, for doors including cost of cutting floors as required,
embedding in floors and cover plates with brass pivot and single piece M.S. sheet
outer box with slide plate etc. complete as per the direction of Engineer-in-charge.
1191
21.4.2 With brass cover plate
Details of cost for one number
MATERIAL
7396 Double action hydraulic floor spring with each 1.0 1550.00 1 550.00
brass cover plate
9999 Carriage L.S. 13.00 1.00 13.00
9999 Sundries and screws L.S. 26.00 1.00 26.00
Cement concrete 1:2:4
(A) (Rate as per item no 4.1.3 SH : CC) cum 0.002 3257.45 6.51
LABOUR:
For cutting hole and making it good
0112 Carpenter 2nd class for fixing Day 0.01 141.60 1.42
0114 Beldar Day 0.17 135.25 22.99
TOTAL 1643.37
TOTAL 1659.74
except on (A)
Say 1907.70
21.5 Providing and fixing powder coated aluminium work (minimum thickness of
powder coating 50 micron) consisting of tee/ angle sections, of approved make
conforming to IS : 733 in frames of false ceiling including aluminium angle cleats
with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter
angles fixed to wall with rawl plugs @ 450 mm centre to centre and fixing the
frame work to G.I. level adjusting hangers 6«mm dia. with necessary cadmium
plated machine screws all complete as per approved architectural drawings and
direction of the Engineer-in-charge (level adjusting hangers, ceiling cleats and
expansion hold fasteners to be paid for separately).
Details of cost for 6.35 kg (2.40x2.40 = 5.76
sqm)
MATERIAL
(i) Aluminium main runner - assuming Tee of
size 35x23.5x1.5 mm @ 600 mm centre to
centre 3.00x2.40m, =7.20m
Extra for light fittings
2x1.20 m = 2.40 m
= 9.60 m @ 0.247 kg/m = 2.370 kg
Aluminium cross runner - assuming Tee of
size 35x23.5x1.5 mm @ 600 mm centre to
centre
3x4x0.60 m = 7.20 m
(-) 2x0.30 = (-) 0.60 m
=6.60 m @ 0.247 kg/m = 1.630 kg
Perimeter angle aluminium - assuming size
25.4x25.4xl .63 mm @ 600 mm centre to
centre
4x2.40 m = 9.60 m @ 0.213 kg/m = 2.045 kg
(ii) CLEATS
Aluminium angle- assuming size
1192
25.4x25.4xl.63 mm
Extra for light fittings =3x2x2 = 12.00
Corner = 4.00
For joining runners = 42.00
= 58.00x0.025 = 1.45 m@ 0.213 kg/m =
0.309 kg
Sub total =6.354 kg
7306 = 6.672 kg Kilogrm 6.672 195.00 1301.04
0589 (iii) C.P. brass/ stainless steel screws 20 mm 100 Nos 1.16 63.00 0.73
for angle cleats
7048 (iv) Rawl plug for fixing perimeter angles each 24.0 7.00 168.00
7392 Epoxy powder coating 50 microns on Kilogram 6.67 45.00 300.15
aluminium sections,
9999 (vi) Carriage of material L.S. 13.00 1.00 13.00
9999 (vii) C.P. brass screws for fixing frame with L.S. 13.00 1.00 13.00
suspenders
LABOUR
For fabrication and erection
0114 Beldar Day 0.64 135.25 86.56
Scaffolding and sundries L.S. 13.00 1.00 13.00
TOTAL 1992.44
TOTAL 2012.36
Cost for 6.35 kg 2314.21
Say 364.45
21.6 Providing and fixing 6 mm dia. G.I. level adjusting hangers (upto 1200mm length)
fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40x3mm size
60mm long and expansion hold fasteners 12.5 mm dia. 40mm long complete as
per direction of Engineer -in-charge.
Details of cost for 23 nos (hangers in 2.40 mx

2.40 m = 5.76 sqm)one number
MATERIAL
6 mm dia G.I. adjustable hangers including
clips (upto 1.20 metre length)
For light fiting 2x4=8.00 Nos
For runners = 15.00
total = 23.00 Nos
7395 6 mm dia. G.I. adjustable hangers including each 23.00 25.00 575.00
clips (upto 1.2 m length)
Ceiling cleats
G.I. flat 40X3 mm 60mm long
23x0.06= [email protected]/m= 1.31kg
0992 = 1.38 kg quintal 0.014 3450.00 48.30
7388 Dash fastner 12.5 mm dia 40 mm long with 6 each 23.0 30.00 690.00
mm dia bolts
1193
LABOUR:
0114 Beldar Day 0.27 135.25 36.52
TOTAL 1408.04
TOTAL 1422.12
Cost for 23 hangers 1635.44
Cost for one hanger 71.11
Say 71.10
21.7 Providing and fixing machine moulded aluminium covering of approved pattern
& design, made out of machine cut aluminium sheet and machine holed for
receiving screws, over expansion joints on vertical surfaces/ceilings with full
threaded, cadmium plated steel screws 4mm dia. stem, 30mm long and aluminium
washers 2mm thick, 15mm dia. at a staggered pitch of 200mm centre to centre
including drilling holes in the receiving surface and providing expandable plastic
sleeves in holes etc. complete.
21.7.1 Anodised aluminium sheet 2.5mm thick (anodised transparent or dyed to required
shade according to IS: 1868, Minimum anodic coating of grade AC 15)

MATERIAL
Anodised aluminium sheet 2.5 mm thick, 170
mm wide
5.88m x0.17m = 1.00 sqm @ 7.00 Kg/sqm
= 7.00kg
7389 Anodising 15 microns on aluminium sections kilogram 7.35 32.00 235.20
7347 Cadmium plated full threaded steel screws 30 100 Nos 30.00 23.00 6.90
mm x 4 mm dia
7348 Aluminium washers 2 mm 15 mm dia 100 Nos 30.00 7.00 2.10
7313 Expandable plastic sleeves each 30.00 7.00 210.00
LABOUR
0114 Beldar Day 0.392 135.25 53.02
9999 Sundries including machine work L.S. 21.45 1.00 21.45
TOTAL 2023.93
TOTAL 2044.17
Cost for 7.00 kg 2350.80
Say 335.85
21.7 Providing and fixing machine moulded aluminium covering of approved pattern
& design, made out of machine cut aluminium sheet and machine holed for
receiving screws, over expansion joints on vertical surfaces/ceilings with full
threaded, cadmium plated steel screws 4mm dia. stem, 30mm long and aluminium
1194
washers 2mm thick, 15mm dia. at a staggered pitch of 200mm centre to centre
including drilling holes in the receiving surface ancTproviding expandable plastic
sleeves in holes etc. complete.
21.7.2 Powder coated aluminium sheet 2.5mm thick (minimum thickness of powder
coating 50 micron)

MATERIAL
Anodised aluminium sheet 2.5 mm thick, 170
mm wide
5.88 mm x0.17m =1.00 m@ 7.00kg/sqm wide
2704 Total = 7.35 kg kilogram 7.35 195.00 1433.25
7392 Epoxy powder coating 50 microns on kilogram 7.35 45.00 330.75
aluminium sections.
7347 Cadmium plated full threaded steel screws 30 100 Nos 30 23.00 6.90
mm x 4 mm dia
7348 Aluminium washers 2 mm 15 mm dia 100 Nos 30 7.00 2.10
7313 Expandable plastic sleeves each 30 7.00 210.00
9999 Carriage of materials L.S 6.50 1.00 6.50
LABOUR
0114 Beldar Day 0.392 135.25 53.02
9999 Sundries including machine work L.S. 21.45 1.00 21.45
TOTAL 2119.48
TOTAL 2140.67
CostTor 7.00 kg 2461.77
Say 351.70
21.8 Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work
by providing weather silicon sealant over backer rod of approved quality as per
architectural drawings and direction of Engineer-in-charge complete.
21.8.1 Upto 5mm depth and 5 mm width

MATERIAL
8646 Silicon sealant (i/c 5% wastage) Cartridge 0.087 281.00 24.45
8654 Masking tape. metre 2.00 1.40 2.80
9999 Sundries & profile L.S 2.60 1.00 2.60
9999 Labour L.S 20.80 1.00 20.80
TOTAL 50.65
Add 1 % for water charges , 0.51
TOTAL 51.16
Say 58.85
1195
21.9 Extra for applying additional anodic coating AC 25 instead of AC 15 to aluminium
extruded sections.
21.9.1 For fixed portion
7391 Anodising 25 microns on aluminium sections Kilogram 41.09 40.00 1643.60
7389 Anodising 15 microns on aluminium sections Kilogram 41.09 32.00 (-)1314.88
Difference 328.72
TOTAL 332.01
Cost for 41.09 kg 381.81
Cost for 1 kg 9.29
Say 9.30
21.9 Extra for applying additional anodic coating AC 25 instead of AC 15 to aluminium

extruded sections.
21.9.2 For shutters of doors, windows & ventilators.
7389 Anodising 15 microns on aluminium sections kilogram 21.65 32.00 (-)692.80
Difference 173.20
TOTAL 174.93
Cost for 21.65kg 201.17
Cost for 1 kg 9.29
Say 9.30
21.10 Providing and fixing double glazed hermetically sealed glazing in aluminium
windows, ventilators and partition etc. with 6 mm thick clear float glass both
side having 12 mm air gap including providing EPDM gasket, perforated
aluminium spacers, desiccants, silicon sealant (Both primary and secondary
sealant) etc. as per specifications, drawings and direction of Engineer-in-charge
complete.
MATERIAL
Hermetically sealled double glazed unit made
with 6mm thick clear float glass both side
having 12 mm air gap. = 1.00 sqm
Add for wastage & breakage @ 10% = 0.10sqm
Total =1.10sqm
8648 Hermetically sealled double glazed unit made sqm 1.10 1980.00 2178.00
with 6mm thick clear float glass both side
having 12 mm air gap.
7390 Neoprin/EPDM rubber gasket metre 6.00 2.00 132.00
LABOUR:
1196
0112 Glazier Day 0.23 141.60 32.57

0114 Beldar Day 0.46 135.25 62.22
TOTAL 2418.34
TOTAL 2442.52
Add ra% for contractor’s profit and overheads 366.38
Say 2808.90
21.11 Providing and fixing stainless steel (SS-304 grade) adjustable friction windows
stays of approved quality with necessary stainless steel screws etc. to the side
hung windows as per direction of Engineer-in-charge complete.
21.11.1 205X19mm
Details of cost sor 10 nos.
MATERIAL
8649 Stainless steel (SS 304 grade) adjustable each 10 145.60 1 456.00
friction window stay. 205 x 19mm
8647 Stainless steal screws 30mm x4mm. cent 0.40 25.00 10.00
9999 Carriage L.S. 2.73 1.00 2.73
LABOUR:
0114 Beldar Day 0.14 135.25 18.94
TOTAL 1507.49
TOTAL 1522.56
Cost for 10 nos 1750.94
Say 175.10
21.11 Providing and fixing stainless steel (SS 304 grade) adjustable friction windows
21.11.2 255X19mm
MATERIAL
8650 Stainless steel (SS 304 grade) adjustable each 10.00 161.20 1612.00
friction window stay 255 x 19mm
9999 Carriage L.S. 2.73 1.00 2.73
LABOUR:
0114 Beldar Day 0.14 135.25 18.94
TOTAL 1663.49
TOTAL 1680.12
Cost for 10 nos 1932.14
Say 193.20
1197
hung windows as per direction of Engineer-in-charge complete. ,
21.11.3 355X19 mm
MATERIAL
8651 Stainless steel (SS 304 grade) adjustable each 10.00 208.00 2080.00
9999 Carriage L.S. 2.73 1.00 2.73
LABOUR:
0114 Beldar Day 0.14 135.25 18.94
TOTAL 2 131.49
TOTAL- 2 152.80
Cost for 10 nos 2 475.72
Say 247.55
21.11.4 510X19mm
MATERIAL
8652 Stainless steel (SS 304 grade) adjustable each 10 390.00 3900.00
friction window stay. 510x19mm
9999 Carriage L.S. 2.73 1.00 2.73
LABOUR:
0114 Beldar Day 0.14 135.25 18.94
TOTAL 3 951.49
TOTAL- 3 991.00
Say 458.95
1198
21.11.5 710X19mm

MATERIAL
8653 Stainless steel (SS 304 grade) adjustable each 10 715.00 7 150.00
8647 Stainless steel screws 30mm x4mm. cent 0.40 25.00 10.00
9999 Carriage L.S. 2.73 1.00 2.73
LABOUR:
0114 Beldar Day 0.14 135.25 18.94
TOTAL 7 201.49
TOTAL 7 273.50
Say 836.45
21.12 Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick
& 2100 mm long with SS screws etc .complete as per direction of Engineer-in-
Charge.
21.12.1 Anodized (AC 15 ) aluminium tubular handle bar
Details of cost for 10 nos handle bar.

Materials
10x22/7 x 1/4 (0.032x0.032 - 0.026 x 0.026) x
2.10 = 0.0057 cum
0.0057 cum @ 2710 kg/ cum = 15.56kg
Add 5% wastage 0.78 kg
Total 16.34 kg
7306 Aluminium T or L sections kilogram 16.34 195.00 3186.30
Labour
0111 Carpenter 1st class. Day 0.125 151.50 18.94
Total 3734.54
Add 1% water charges 37.35
Total 3771.89
Add 15% contractor profit and overheads 565.78
Cost of 10 nos 4337.67
Cost of 1 no 433.77
Say 433.75
21.12 Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick
& 2100 mm long with SS scrwes etc .complete as per direction of Engineer-in-
Charge.
21.12.2 Powder coated minimum thickness 50 micron aluminium tubular handle bar.
Materials
10x22/7 x 1/4 (0.032x0.032 - 0.026 x 0.026) x
2.10 = 0.0057 cum
1199
0.0057 cum @ 2710 kg/ cum = 15.56kg

Total = 16.34 kg
7306 Aluminium T or L sections kilogram 16.34 195.00 3186.30
7392 Epoxy powder coating 50 micron on kilogram 16.34 45.00 735.30
aluminium sections.
Labour
Total 3946.96
Add 1% water charges 39.47
Total 3986.43
AddJ15% contractor profit and overheads 597.96
Cost of 1 no 458.44
Say 458.45
21.12 Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick &
2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge.
21.12.3 Polyester powder coated minimum thickness 50 micron aluminium tubular handle
bar

Materials
10x22/7 x 1/4 (0.032x0.032 - 0.026 x 0.026) x
2.10 = 0.0057
0.0057 cum @ 2710 kg/cum = 15.56kg
Total =16.34 kg
7306 Aluminium T or L sections Kilogram 16.34 195.00 3186.30
7393 Polyester powder coating 50 microns on Kilogram 16.34 50.00 817.00
aluminium sections
Labour
Total 4028.66
Add 1 % water charges 40.29
Total 4068.95
Add 15% contractor profit and overheads 610.34
Cost of 1 no 467.93
Say 467.95
21.13 Providing and fixing 100mm brass locks (best make of approved quality) for
aluminium doors including necessary cutting and making good etc. complete.
Detail of cost for 1 nos.

Materials
Brass 100 mm mortice latch and lock with6 each 1.00 150.00 150.00
7001 levers without pair of handles
1200
Labour
9999 Sundry and screws L.S. 3.64 1.00 3.64
Total 179.40
Total 181.19
15%
Cost of 1 no 208.37
Say 208.35
21.14 Providing and fixing anodised aluminium (anodised transparent or dyed to

required shade according to IS : 1868. Minimum anodic coating of grade AC 15)
sub frame work for windows and ventilators with extruded built up standard
tubular sections of approved make conforming to IS: 733 and IS : 1285 fixed with
rawl plugs and stainless steel screws etc.

Details of cost for 4.082kg
section no TU/ 3644)
V = 2x2.00 = 4.00 m
H = 2x1.20 = 2.40 m
= 6.40 m @ 0.607 kg/m = 3.885kg
Angle cleat 38x38x4.8 mm 50 mm long
4x0.05 = 0.200 m @ 0.985 kg/m = 0.197 kg
sub total = 4.082kg.
Add 5% wastage = 0.204kg
7306 Total = 4.276kg kilogram 4.286 195.00 835.77
0589 C.P. brass /stainless steel screws 20 mm 100 Nos 8.00 63.00 5.04
for cleat angle.
7019 Dash hold fastners each 8.00 8.00 64.00
7389 Anodising kilogram 4.286 32.00 137.15
LABOUR
0116 Fitter Day 0.04 151.50 6.06
0114 Beldar Day 0.02 135.25 2.70
0100 Bandhani Day 0.01 138.45 1.38
fastners & sundries
TOTAL 1068.04
TOTAL 1078.72
Cost for 4.082 kg 1240.53
Say 303.90
1201
21.15 Providing and fixing aluminium casement windows fastener of required length
for aluminium windows with necessary screws etc. complete.
21.15.1 Anodized(AC 15) aluminium
Materials
8660 Aluminium casement window fastner each 10.00 30.00 300.00
(Anodised AC 15 )
8666 Stainless steel screws 25mm x4mm cent 0.40 21.00 8.40
Labour
Total 320.22
Total 323.42
15%
Cost of 1 nos 37.19
Say 37.20
21.15.2 Powder coated minimum thickness 50 micron aluminium.
Materials
8661 Aluminium casement window fastner (powder each 10.00 33.00 330.00
coated).
Labour
Total 350.22
Total 353.72
15%
Cost of 1 nos 40.68
Say 40.70
21.15.3 Polyester powder coated minimum thickness 50 micron aluminium .
Materials
8662 Aluminium casement window fastner each 10.00 35.00 350.00
(polyester powder coated).
Labour
1202

Total 370.22
Total 373.92
for contractor’s profit and overhead @ 56.09
15%
Cost of 1 nos 43.00
Say 43.00
21.16 Providing and fixing aluminium round shape handle of outer dia 100mm with SS
screws etc. Complete as per direction of Engineer-in-charge
21.16.1 Anodized (AC 15 ) aluminium
Materials
8663 Aluminium round shape handle (anodised AC each 10.00 37.00 370.00
15)
Labour
Total 390.22
Total 394.12
15 %
Cost of 1 nos 45.32
Say 45.30
screws etc. Complete as per direction of Engineer-in-charge.
21.16.2 Powder coated minimum thickness 50 micron aluminium.
Materials
8664 Aluminium round shape handle (powder each 10.00 41.00 410.00
coated)
Labour
Total 430.22
Total 434.52
15%
Cost of 1 nos 49.97
Say 49.95
1203
screws etc. Complete as per direction of Engineer-in-charge.
21.16.3 Polyester powder coated minimum thickness 50 micron aluminium .
Materials
8665 Aluminium round shape handle (polyester each 10.00 43.00 430.00
powder coated).
Labour
Total 450.22
Total 454.72
15%
Cost of 1 nos 52.29
Say 52.30
1205
SUB HEAD : 22.0

WATER PROOFING
1207
22.1 Providing and laying integral cement based treatment for water proofing on
horizontal surface at all depth below ground level for under ground structures as
directed by Engineer-in-Charge and consisting of : (i) 1st layer of 22mm to 25mm
thick approved and specified rough stone slab over a 25mm thick base of cement
mortar 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound
conforming to IS:2645 in the recommended proportion over the levelling course
(levelling course to be paid separately). Joints sealed and grouted with cement
slurry mixed with water proofing compound . ii) 2nd layer of 25mm thick cement
mortar 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in
recommended proportions. iii) Finishing top with stone aggregate of 10mm to 12mm
nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer.
22.1.1 Using rough kota stone.

MATERIAL
Ist layer
Cement mortar 1:3 for fixing of stone 10 x 0.025 = 0.25 cum 0.25 3169.60 792.40
1169 Kota stone slab = 10 sqm
Wastage @ 10% = 1sqm
Total = 11 sqm sqm 11.00 150.00 1650.00
2216 Cartage 11x0.025 @2330 kg/m3 = 0.64 t tonne 0.64 47.29 30.27
Cement mortar 1:3
10x0.025 = 0.25 cum
Wastage @ 12% = 0.03 cum
Total = 0.28 cum(Rate as per item no.3.8) cum 0.28 3169.60 887.49
Cement for slurry
Bed
2x10.00 @ 2kg/m3 = 40.00 kg
Joints
4x3.7x0.02x0.037 = 0.011 cum
25x0.6x0.02x0.037 = 0.011 cum
= 0.022 cum @ 1440 kg/cum =31.68 kg
0367 Total = 71.88 kg or 0. 72 t tonne 0.072 4500.00 324.00
Water proofing material
Mortar = 0.25 + 0.28 = 0.53 cum
Cement in 0.53 cum @ 5.1 q/cum = 2.7 quintal
Cement in slurry = 0.73 quintal
= 3.43 quintal @ 1 kg for 50 kg of cement
1213 i.e. 6.86 kg kilogram 6.86 20.00 137.20
12 mm stone grit @ 8 cudm/sqm
0296 1x10.3x8x1/1000 = 0.08 cum cum 0.08 700.00 56.00
Carriage
2202 Labour for base mortar & kota stone laying cum 0.08 53.21 4.26
i/c slurry job
Mason 2nd class
0125 Beldar Day 1.20 141.60 169.92
0114 Coolie Day 1.00 135.25 135.25
0115 Labour for top layer & spreading stone grit Day 1.00 135.25 135.25
1208

Mason 2nd class
0125 Beldar Day 1.08 141.60 152.93
0114 Bhisti Day 1.08 135.25 146.07
0101 Sundries Day 0.45 138.45 62.30
9999 TOTAL L.S 6.24 1.00 6.24
TOTAL 46.93
Cost for 10.00 sqm 710.99
Say 545.09
545.10
22.2 Providing and laying integral cement based treatment for water proofing on the ver-
tical surface by fixing specified stone slab 22 mm to 25mm thick with cement slurry
mixed with water proofing compound conforming to IS:2645 in recommended pro-
portions with a gap of 20mm (minimum) between stone slabs and the receiving sur-
faces and filling the gaps with neat cement slurry mixed with water proofing com-
pound and finishing the exjerior of stone slab with cement mortar 1:3 (1 cement : 3
coarse sand) 20mm thick with neat cement punning mixed with water proofing com-
pound in recommended proportion complete at all levels and as directed by Engi-
neer-in-charge :
22.2.1 Using rough Kota stone
Details of cost for10.00sqm.

MATERIAL
1st layer
Kota stone slab = 10 sqm
Wastage 10% = 1 sqm
1169 Total = 11 sqm sqm 11.00 150.00 1650.00
2216 Cartage 11x0.025 @ 2330 kg/m3 = 0.64t tonne 0.64 47.29 30.27
Cement slurry for jointing
6x3.70 = 22.20 m
7x2.78= 19.46 m
=41.66x0.025x0.012 = 0.013 cum
Cement slurry for filling 20 mm gap
10x0.02 = 0.200 cum
0367 = 0.213 cum @ 1440 kg/cum = 306.70 kg or tonne 0.31 4500.00 1395.00
0.307 t
2209 Carriage tonne 0.31 47.29 14.66
Cement plaster 1:3 with neat cement punning)
(A) (Rate as per item no. 13.9.2 ) sqm 10.00 153.98 1539.80
Water proofing material
Cement slurry = 0.31 t = 310 kg
Cement plaster 1:3 @ 13.62 q/100sqm =
136.20 kg
1213 Total = 446.20 kg @ 1 kg for 50 kg of cement kilogram 8.90 20.00 178.00
i.e. 8.90 kg
LABOUR
Fixing of Kota stone and applying cement &
applying slurry. 424.80
1209

0114 Beldar Day 3.00 135.25 405.75
0115 Coolie Day 1.00 135.25 135.25
9999 Sundries and scaffolding L.S 18.20 1.00 18.20
TOTAL 5791.73
TOTAL 5834.25
except on (A)
Cost for 10.00sqm 6478.42
Say 647.85
22.3 Providing and laying water proofing treatment to vertical and horizontal surfaces of
depressed portions of W.C., kitchen and the like consisting of :
(i) 1st course of applying cement slurry @ 4.4 Kg/sqm mixed with water proofing
compound conforming to IS 2645 in recommended proportions including
rounding off junction of vertical and horizontal surface.
(ii) Ilnd course of 20mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with
water proofing compound in recommended proportion including rounding off
junction of vertical and horizontal surface.
(iii) Illrd course of applying blown or residual bitumen applied hot at 1.7 Kg. per
sqm of area.
(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet
should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm.)

MATERIAL
0367 Cement slurry @ 4.4 kg/sqm = 44.00 kg or tonne 0.044 4500.00 198.00
0.044 t
2209 Carriage tonne 0.044 47.29 2.08
Cement plaster 1:3 (20 mm thick)
Materials :
Cement mortar1:3 (Rate as per items no.3.8) cum 0.224 3169.60 709.99
Labour
0155 Mason Day 0.94 146.55 137.76
0115 Coolie Day 1.02 135.25 137.96
0101 Bhisti Day 1.10 138.45 152.30
9999 Scafolding and sundries L.S 12.61 1.00 12.61
Bitumen blown or/and residual bitumen
0313 = 10x1.70= 17 kg = 0.017 t tonne 0.017 25000.00 425.00
2211 Carriage tonne 0.017 53.21 0.90
3002 PVC 400 micron thick sheet sqm 10.00 26.00 260.00
9999 Carriage L.S 13.00 1.00 13.00
Water proofing compound @ 1 kg per 50 kg
of cement used
Cement slurry = 44 kg
Cement plaster 1:3
10x(13.62xl00)/100= 136.2 kg
1213 Total = 180.2 kg/50 = 3.60 kg kilogram 3.60 20.00 72.00
LABOUR
0131 Painter Day 0.20 141.60 28.32
1210
0114 Beldar Day 1.33 135.25 179.88

0130 Mistry Day 0.06 151.50 9.09
9999 Sundries L.S 7.28 1.00 7.28
TOTAL 2346.17
TOTAL 2369.63
Say 272.50
22.4 Providing and Placing in position suitable PVC water stops conforming to IS:
12200 for construction/expansion joints between two RCC members and fixed to
the reinforcement with binding wire before pouring concrete etc. complete :
22.4.1 Serrated with central bulb (225mm wide, 8-11mm thick).

MATERIAL
7427 Water stop serreted with bulb metre 100.00 330.00 33 000.00
Labour
0114 Beldar Day 2.00 135.25 270.50
9999 Sundries & wire etc. L.S 26.00 1.00 26.00
TOTAL 33 296.50
TOTAL 33 629.46
Cost for 100 metres 38 673.88
Say 386.75
22.4 Providing and Placing in position suitable PVC water stops conforming to IS: 12200
for construction/expansion joints between two RCC members and fixed to the
reinforcement with binding wire before pouring concrete etc. complete :
22.4.2 Dumb bell with central bulb (180 mm wide, 8 mm thick)

MATERIAL
7429 Dumb bell with central bulb (180 mm wide, 8 metre 100.00 306.00 30 600.00
mm thick)
Labour
0114 Beldar Day 2.00 135.25 270.50
TOTAL 30 896.50
TOTAL- 31 205.47
Say 358.85
1211
22.4 Providing and Placing in position suitable PVC water stops conforming to IS: 12200
for construction/ expansion joints between two RCC members and fixed to the
reinforcement with binding wire before pouring concrete etc. complete :
22.4.3 Kickers (320mm wide, 5mm thick).

MATERIAL
7429 Kickers (320 mm wide, 5 mm thick) metre 100.00 325.00 32500.00
Labour
0114 Beldar Day 2.00 135.25 270.50
TOTAL 32 796.50
TOTAL 33 124.46
Say 380.95
22.5 Providing and laying water proofing treatment in sunken portion of WCs, bathroom
etc., by applying cement slurry mixed with water proofing cement compound
consisting of applying :
(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement
compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours
(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing
cement compound @ 0.126 kg/sqm.
This layer will be allowed to air cure for 4 hours followed with water curing for 48
hours.
The rate includes preparation of surface, treatment and sealing of all joints,
corners, junctions of pipes and masonry with polymer mixed slurry.
Details of cost for 10 sqm .

MATERIAL
Cement 10x(0.488 + 0.242) = 7.30 kg
Sealing fillets10 x 0.5 kg =5.00kg
0367 Total = 12.30 kg = 0.012 tonne tonne 0.012 4500.00 54.00
Bonding material 1.6 kgx30x2 = 96 kg
Bitumen (blown/residual type)
10x(0.25+0.126) = 3.79kg
Sealing fillets 10x0.10 kg / sqm = 1.00 kg
Wastage @ 5% on 4.79 kg = 0.24 kg
8501 Total = 5.03 kg Say 5.00 kg kilogram 5.00 114.00 570.00
LABOUR
0114 Beldar Day 2.00 135.25 270.50
0101 Bhisti Day 0.25 138.45 34.61
9999 Sundries, brushes etc L.S 15.60 1.00 15.60
TOTAL 1 238.38
TOTAL 1 250.76
Say 143.85
1212
22.6 Providing and laying water proofing treatment on roofs of slabs by applying cement
slurry mixed with water proofing cement compound consisting of applying :
(a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed
with water proofing cement compound @ 0.253 kg/sqm.
(b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps
of joints of fibre cloth should not be less than 10 cm.
(c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm
mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand
@ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water
curing for 48 hours. The entire treatment will be taken upto 30cm on parapet
wall and tucked into groove in parapet all around.
(d) fourth and final layer of brick tiling with cement mortar (which will be paid for
separately For the purpose of measurement the entire treated surface will be
measured.

MATERIAL
Cement 10x (1.289 + 0.488) = 17.77 kg
Sealing fillets @ 10% = 1.77 kg
0367 Total = 19.54kg = 0.020 tonne tonne 0.02 4500.00 90.00
Bonding material 1.6 kgx30x2 = 96 kg
Bitumen (blown/residual type)
10x(0.253+0.67) = 9.23kg
Wastage 5% = 0.46 kg
Fibre Glass cloth = 10.00 sqm
Wastage 10 % - 1.00 sqm
8502 Total = 11.00 sqm sqm 11.00 33.00 363.00
LABOUR
0114 Beldar Day 1.00 135.25 135.25
0101 Bhisti Day 0.25 138.45 34.61
9999 Sundries, brushes etc L.S 23.40 1.00 23.40
TOTAL 2044.97
TOTAL- 2065.42
Say 237.50
22.7 Providing and laying integral cement based water proofing treatment including
preparation of surface as required for treatment of roofs, balconies, terraces etc
consisting of following operations:
(a) Applying a slurry coat of neat cement using 2.75 kg/sqm. of cement admixed
with water proofing compound conforming to IS. 2645 and approved by
Engineer-in-charge over the RCC slab including adjoining walls upto 300mm
height including cleaning the surface before treatment.
(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115mm size
with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water
proofing compound conforming to IS : 2645 and approved by Engineer-in-charge
over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand )
1213
admixed with water proofing compound conforming to IS : 2645 and approved

by Engineer-in-charge to required slope and treating similarly the adjoining walls
upto 300 mm height including rounding of junctions of walls and slabs
(c) After two days of proper curing applying a second coat of cement slurry using
2.75kg/ sqm of cement admixed with water proofing compound conforming to
IS : 2645 and approved by Engineer-in-charge.
(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1
cement :4 coarse sand) admixed with water proofing compound conforming to
IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth
of approved quality in top layer of plaster and finally finishing the surface with
trowel with neat cement slurry and making pattern of 300x300 mm square 3mm
deep.
(e) The whole terrace so finished shall be flooded with water for a minimum period
of two weeks for curing and for final test. All above operations to be done in
order and as directed and specified by the Engineer-in-Charge :
22.7.1 With average thickness of 120mm and minimum thickness at khurra as 65 mm.

i) Cement slurry
0367 Cement tonne 0.0275 4 500.00 123.75
ii) Cement mortar 1:5 (1 cement: 5 coarse cum 0.224 2 260.15 506.27
sand) (Rate as per item no.3.10)
iii) Roof treatment with brick bats and cement
mortar
Materials:
0285 Brick bats/ brick aggregate cum 0.94 350.00 329.00
2260 Carriage cum 0.94 57.83 54.36
Cement mortar 1:5 (Rate as per item no.3.10) cum 0.50 2 260.15 1 130.08
Labour
0114 Beldar Day 1.75 135.25 236.69
0101 Bhishti Day 0.28 138.45 38.77
0128 Mate Day 0.04 138.45 5.54
Extra labour for ramming
0114 Beldar Day 0.25 135.25 33.81
9999 Sundries L.S 13.65 1.00 13.65
iv) Cement slury
0367 Cement tonne 0.0275 4 500.00 123.75
0114 Beldar Day 0.20 135.25 27.05
v) 20 mm cement plaster 1:4(1 cement: 4
coarse sand)
(A) (Rate as per item no 13.6.1 of SH : sqm 10.00 118.25 1182.50
Finishing)
vi) Water proofing compound
1213 27.50+27.50+69.40+124.00 = 248.40 kg @ kilogram 5.00 20.00 100.00
1 kg per bag of cement
Extra for making chequers for 10 sqm
7233 Fibre glass tissue reinforcement Type IIGrade I sqm 10.50 55.00 577.50
Mason 2nd class
0124 Beldar Day 0.36 141.60 50.98
0114 Chequer plate Day 0.36 135.25 48.69
9999 Add labour for laying 20 mm bed mortar L.S. 13.65 1.00 13.65
Mason 2nd class
1214
0124 Beldar Day 0.54 141.60 76.46

0114 Bhishti Day 0.54 135.25 73.04
0101 TOTAL Day 0.45 138.45 62.30
TOTAL 36.44
15% on all except ‘A’ 552.06
Cost for 10 sqm
Cost for one sqm 5414.96
Say 541.50
541.50
22.8 Providing and laying four courses water proofing treatment with bitumen felt over
roofs consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming
to IS : 702 applied hot @ 1.45 Kg per square metre of area for each course, second
course of roofing felt type 3 grade-I (Hessian based self finished bitumen” felt) and
fourth and final course of stone grit 6mm and down size or pea-sized gravel spread
at 6 cubic diameter per square metre including preparation of surface but excluding
grading complete with :
22.8.1 Bitumen felt (Hessian base) type 3 grade I conforming to IS : 1322.

Blown or / and residual bitumen applied hot
0313 = 2x1.45x30 = 87 kg tonne 0.087 25000.00 2175.00
Hession felt type 3 Grade I
(hessian base self finished bitumen felt) = 30 sqm
Add for over lapping @ 10% = 3 sqm.
0322 Total = 33 Sqm. sqm 33.00 45.00 1485.00
1177 Stone grit 6mm and down size or pea sized cum 0.18 717.00 129.06
gravel. 30x6=180 cudm.
2202 Carriage of stone grit cum 0.18 53.21 9.58
2211 Carriage of bitumen and felt. = 0.162t tonne 0.162 53.21 8.62
0.087tx2.7x.001x33=0.162t
0370 Fuel (Steam coal) = 2 quintals/t of bitumen i.e. quintal 0.174 300.00 52.20
2x0.087=0.174q
2200 Carriage of fuel tonne 0.174 60.81 1.06
9999 Praparing roof surface, sutting groove and L.S 134.55 1.00 134.55
making good etc.
Labour:
0131 Painter Day 2.16 141.60 305.86
0114 Beldar Day 3.24 135.25 438.21
0130 Mistries Day 0.18 151.50 27.27
9999 Sundries, brushes etc. L.S 6.76 1.00 6.76
TOTAL 4 773.17
TOTAL 4 820.90
Cost of 30.00 Sqm. 5 544.04
Cost of 1.00 Sqm. 184.80
Say 184.80
1215
22.9 Providing and laying six courses water proofing treatment with bitumen felt over
roofs consisting of first, third and fifth course of blown bitumen 85/25 or 90/15
conforming to IS : 702 applied hot @ 1.45, 1.20 and 1.45 Kg per square metre of area
respectively, second and fourth courses of roofing felt type 3 grade I conforming to
IS : 1322 (Hessian based self finished bitumen felt) conforming to IS : 1322 and sixth
and final course of stone grit 6 mm and down size or pea sized gravel spread at 6
cubic dm per sqm including preparation of surface but excluding grading, complete.

Blown or / and residual bitumen applied hot
(1.45+1.20+1.45)x30
0313 123 Kg. tonne 0.123 25000.00 3 075.00
Bitumen felt type 3 grade I
(hession base self finished bitumen felt) = 60
sqm.+
0322 =66 Sqm. sqm 66.00 45.00 2 970.00
2211 Carriage of bitumen and felt. =0.273t.
0.123tx2.7x.001x66=0.273t tonne 0.273 53.21 14.53
1177 Stone grit 6mm and sown size or pea sized cum 0.18 717.00 129.06
gravel 30x6=180cudm.
2x0.123=0.246q
9999 Praparing roof surface, sutting groove and L.S 134.55 1.00 134.55
making good etc.
Labour:
0131 Painter Day 3.24 141.60 458.78
0114 Beldar Day 4.86 135.25 657.32
0130 Mistries Day 0.20 151.50 30.30
TOTAL 7 561.18
TOTAL 7636.79
Cost of 30.00 Sqm. 8782.31
Cost of 1.00 Sqm. 292.74
Say 292.75
22.10 Providing and laying six courses water proofing treatment with bitumen felt over
roofs consisting of first, third and fifth courses of blown or / and residual bitumen
applied hot at 1.45, 1.20 and 1.70 kg per square metre of area respectively, second and
fourth courses of roofing felt type 2 grade I (fibre base self finished bitufnen felt) six
and final courses of stone grit 6mm and down size or pea sized gravel spread at
6cu.dm per sqm including preparation of surface, excluding grading compete.
Blown bitumen applied hot
(1.45+1.20+1.70)x30
130.5 Kg.
0313 tonne 0.1305 25000.00 3262.50
Bitumen felt type B grade I
(fibre base self finished bitumen felt) = 60
sqm.
1216

Total =66 Sqm.
0318 Carriage of bitumen and felt. sqm 66.00 45.00 2 970.00
0.131 tx2.22x.001x66 = 0.248t
2211 Stone grit 6mm and sown size or pea sized tonne 0.275 53.21 14.63
1177 ravel. 30x6=180cudm. cum 0.18 717.00 129.06
Carriage of stone grit
2202 Fuel (Steam coal) = 2 quintals/t of bitumen i.e. cum 0.18 53.21 9.58
0370 2x0.123=0.246q quintal 0.246 300.00 73.80
Carriage of fuel
2200 Preparing roof surface, sutting groove and tonne 0.246 60.81 1.50
9999 making good etc. L.S 134.55 1.00 134.55
Labour:
Painter
0131 Beldar Day 4.32 141.60 611.71
0114 Mistries Day 6.48 135.25 876.42
0130 Sundries, brushes etc. Day 0.36 151.50 54.54
9999 TOTAL L.S 6.76 1.00 6.76
TOTAL 81.45
Cost of 30.00 Sqm. 1233.98
Cost of 1.00 Sqm. 9460.48
Say 315.35
315.35
22.11 Providing and laying six courses water proofing treatment with bitumen felt over roofs
consisting of first, third and fifth courses of blown or / and residual bitumen applied
hot at 1.45, 1.20 and 1.70 kg per square metre of area respectively, second and fourth
courses of roofing felt type 2 grade II (glass fibre base self finished bitumen felt) and
sixth and final course of stone grit 6mm and down size or pea sized gravel spread at
6 cubic dm per sqm including preparation of surface but excluding grading, complete.

0313 Blown or / and residual bitumen applied hot
(1.45+1.20+1.70)x30
=130.5 Kg. tonne 0.1305 25000.00 3262.50
0318 Bitumen felt type 2 grade II
(fibre base self finished bitumen felt) = 60
sqm.+
=66 Sqm. sqm 66.00 45.00 2 970.00
2211 Carriage of bitumen and felt.
0.131tx3.08x.001x66=334kg. tonne 0.334 53.21 17.77
1177 Stone grit 6mm and down size or pea sized cum 0.18 717.00 129.06
ravel. 30x6=180cudm.
2x0.123=0.246q
1217

9999 Preparing roof surface, sutting groove and L.S 134.55 1.00 134.55
making good etc.
Labour:
0131 Painter Day 4.32 141.60 611.71
0114 Beldar Day 6.48 135.25 876.42
0130 Mistries Day 0.36 151.50 54.54
TOTAL 8148.19
TOTAL 8229.67
Cost of 30.00 Sqm. 9464.12
Cost of 1.00 Sqm. 315.47
Say 315.45
22.12 Supplying and applying bituminous solution primer on roof and or wall surface at
0.24 litre per sqm.
Details of cost for 10 sq. metres

Materials
0316 Bitumenous solution primer litre 2.40 28.00 67.20
9999 Carriage L.S 1.43 1.00 1.43
Labour:
0131 Painter Day 0.17 141.60 24.07
0114 Beldar Day 0.17 135.25 22.99
9999 Sundries brushes etc L.S 13.52 1.00 13.52
TOTAL 129.21
TOTAL 130.50
Cost of 10.00 sqm 150.08
Cost of 1 Cum. 15.01
Say 15.00
1218
22.13 Deduct for omitting in water proofing treatment final course of spreading stone
grit 6mm or down size or pea sized gravel:
22.13.1 At 6 cudm per sqm.

Materials:
1177 Stone grit 6mm or down size 6x10 = 60 cudm. cum 0.06 717.00 43.02
9999 Labour for screening and spreading grit L.S. 21.58 1.00 21.58
9999 Sundries L.S. 6.76 1.00 6.76
TOTAL 74.55
TOTAL 75.30
Cost of 10.00 Sqm. 86.60
Cost of 1.00 Sqm. 8.66
Say 8.65
22.13 Deduct for omitting in water proofing treatment final course of spreading stone
grit 6mm down size or pea sized gravel:
22.13.2 At 8 cudm per sqm.

Materials:
1177 Stone grit 6mm or down size 6x10 = 60 cudm. cum 0.08 717.00 57.36
9999 Labour for screening and spreading grit L.S. 26.91 1.00 26.91
9999 Sundries L.S. 6.76 1.00 6.76
TOTAL 95.29
TOTAL 96.24
Cost 10.00 Sqm. 110.68
Cost of 1.00 Sqm. 11.07
Say 11.05
22.14 Grading roof for water proofing treatment with

22.14.1 Cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm
nominal size)
Details of cost for one cum.

0982 Coarse sand cum 0.45 600.00 270.00
0367 Cement tonne 0.32 4500.00 1440.00
Labour:-
0114 Beldar Day 1.63 135.25 220.46
0101 Bhishti Day 0.70 138.45 96.92
0123 Mason 1st Class Day 0.10 151.50 15.15
1219

9999 Sundries, brushes etc. L.S. 14.30 1.00 14.30
0002 Mixer Day 0.07 400.00 28.00
0012 Vibrator Day 0.07 200.00 14.00
9999 Sundries for laying in terrace L.S. 45.76 1.00 45.76
TOTAL 2854.02
TOTAL 2882.56
Say 3314.95

22.14.2 Cement mortar 1:3(1 cement: 3 coarse sand)

Materials:
Cement mortar 1:3 (Rate as per item no. 3.8) cum 1.00 3169.60 3169.60
Labour
0155 Mason Day 1.00 146.55 146.55
0114 Beldar Day 2.00 135.25 270.50
0101 Bhishti Day 0.50 138.45 69.22
0115 Coolie Day 5.00 135.25 676.25
9999 Sundries L.S. 11.70 1.00 11.70
TOTAL 4343.82
TOTAL- 4387.26
Say 5045.35

22.14.3 Cement mortar 1:4 (lcement: 4 coarse sand)

Materials:
Cement mortar 1:4 (Rate as per item no. 3.9) cum 1.00 2578.45 2578.45
Labour
0155 Mason Day 1.00 146.55 146.55
0114 Beldar Day 2.00 135.25 270.50
0101 Bhishti Day 0.5 138.45 69.22
0115 Coolie Day 5.00 135.25 676.25
9999 Sundries L.S. 10.79 1.00 10.79
TOTAL 3751.76
TOTAL 3789.28
Say 4357.65
22.15 Providing and laying in situ seven course water proofing treatment with APP (Atactic
poly-propylene) modified Polymeric membrane over roof consisting of first coat of
bitumen primer @ 0.40Kg per sqm, 2nd, 4th & 6th courses of bonding material @
1.20 Kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming
to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric
1220
membrane 1.5mm thick of 2.25 Kg/sqm weight consisting of five layers prefabricated
with centre core as 20micron HMHDPE film sandwitched on both sides with
polymeric mix and the polymeric mix is protected on both side with 20micron
HMHDPE film. 7th, the top most layer shall be finished with brick tiles of class
designation 100 grouted with cement mortar 1:3 (lcement:3 fine sand) mixed with
2% integral water proofing compound by weight of cement over a 12mm layer of
cement mortar 1:3 (1 cement: 3 fine sand) and finished neat which shall be paid for
separately as per DSR Item No. 12.19.

MATERIAL
APP modified polymeric felt (two layers) 1.5
mm thick = 2x30 = 60 sqm
Add 10% wastage = 6 sqm
8200 Total = 66 sqm sqm 66.00 50.00 3300.00
0316 Bitumen primer 0.4x30 = 12 litre 12.00 28.00 336.00
0313 Bitumen (Blown/ residual type) 3x36 =108 kg tonne 0.108 25000.00 2700.00
= 0.108 tonne
2211 Carriage of bitumen primer tonne 0.12 53.21 6.39
9999 Carriage of polymeric felt L.S. 7.80 1.00 7.80
0370 Fuel (steam coal) quintal 0.174 300.00 52.20
9999 Preparing roof surface, cutting grooves and L.S. 134.55 1.00 134.55
LABOUR
0131 Painter Day 2.16 141.60 305.86
0114 Beldar Day 3.24 135.25 438.21
0130 Mistry Day 0.18 151.50 27.27
9999 Sundries, brushes etc L.S. 6.76 1.00 6.76
TOTAL 7316.10
TOTAL 7389.26
Say 283.25
22.16 Providing and laying in situ five course water proofing treatment with APP (Atactic
Polypropylene) modified Polymeric membrane over roof consisting of first coat of
bitumen primer @ 0.40Kg per sqm, 2nd & 4th courses of bonding material @ 1.20
Kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to
IS: 702, 3rd layer of roofing membrane APP modified Polymeric membrane 2.0mm
thick of 3.00 Kg/sqm weight consisting of five layers prefabricated with centre
core as lOOmicron HMHDPE film sandwitched on both sides with polymeric mix
and the polymeric mix is protected on both side with 20micron HMHDPE film. 5th,
the top most layer shall be finished with brick tiles of class designation 100 grouted
with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 2% integral water
proofing compound by weight of cement over a 12mm layer of cement mortar 1:3
(1 cement : 3 fine sand) and finished neat which shall be paid for separately as per
DSR Item No. 12.19.
1221
MATERIAL
mm thick =30 sqm
8201 Total = 33 sqm sqm 33.00 85.00 2 805.00
0313 Bitumen (Blown/ residual type) 1.20x30x2 tonne 0.072 25 000.00 1 800.00
=72 kg = 0.072 tonne
LABOUR
0131 Painter Day 1.58 141.60 223.73
0114 Beldar Day 2.37 135.25 320.54
0130 Mistry Day 0.13 151.50 19.70
TOTAL 5711.81
TOTAL 5 768.93
Say 221.15
22.17 Providing and laying in situ seven course water proofing treatment with APP (Atactic
Polypropylene) modified Polymeric membrane over roof consisting of first coat of
bitumen primer @ 0.40Kg per sqm, 2nd, 4th & 6th courses of bonding material @
1.20 Kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming
to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric
membrane 2.0mm thick of 3.00 Kg/sqm weight consisting of five layers prefabricated
with centre core as 1 OOmicron HMHDPE film sandwitched on both sides with
polymeric mix and the polymeric mix is protected on both side with 20micron
HMHDPE film. 7th, the top most layer shall be finished with brick tiles of class
designation 100 grouted with cement mortar 1:3 (1 cement: 3 fine sand) mixed with
2% integral water proofing compound by weight of cement over a 12 mm layer of
cement mortar 1:3 ( 1 cement: 3 fine sand) and finished neat which shall be paid for
separately as per DSR Item No. 12.19.

MATERIAL
mm thick = 3x30 = 60 sqm
Add 10% waistage = 6 sqm
8201 Total = 66 sqm sqm 66.00 85.00 5610.00
0313 Bitumen (Blown/ residual type) 3course x 36 tonne 0.108 25000.00 2700.00
= 108 kg = 0.108 tonne
1222

LABOUR
0131 Painter Day 2.16 141.60 305.86
0114 Beldar Day 3.24 135.25 438.21
0130 Mistry Day 0.18 151.50 27.27
TOTAL 9626.10
TOTAL 9722.36
Say 372.70
22.18 Providing and fixing APP (Atactic Polypropylene Polymer) modified prefabricated
five layer 2mm thick water proofing membrance, black finished reinforced with glass
fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 ltr/
sq. mt. by the same membrane manufacturer of density at 25°C, 0.87 - 0.89 kg/ ltr and
viscosity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid
using Butane torch and sealing all joints etc., and preparing the surface complete.
The vital physical and chemical parameters of the membrane shall be as under :
Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/ 5cm.
Tear strength in longitudinal and transverse direction as 60/80N. Softening point of
membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in
accordance with ASTM, D - 5147. The laying of membrane shall be got done through
the authorised applicator of the manufacturer of membrane.
22.18.1 2mm (for corrugated roof sheets)
MATERIALS :
A.P.P. modified 2 mm thick - 30 sqm
Add 10% for waistage = 3 sqm
Total = 33 sqm
8203 A.P.P. modified 2 mm thick membrane sqm 33.00 147.00 4 851.00
reinforced with glass fibre matt
8206 Bitumen primer for bitumen membrane litre 12.00 54.00 648.00
2211 Carriage of Tar bitumen tonne 0.012 53.21 0.64
9999 Carriage of bitumen membrane L.S. 7.80 1.00 7.80
1241 Fuel LPG kg 7.00 35.00 245.00
9999 Preparing roof surface, cutting grooves L.S. 49.53 1.00 49.53
LABOUR:
0159 Skilled torch operator for laying tack Day 2.16 151.50 327.24
0130 Mistry Day 0.18 151.50 27.27
0114 Beldar Day 3.24 135.25 438.21
9999 Sundries, brushes, bitumen torch etc L.S. 1.00 23.40 23.40
TOTAL 6618.09
TOTAL 6684.27
Say 256.25
1223
22.19 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated
five layer, 3mm thick water proofing membrane, black finished reinforced with glass
fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 ltr/
sqm. by the same membrane manufacturer of density at 25°C, 0.87 - 0.89 kg/ltr and
viscosity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid
using butane torch and sealing all joints etc., and preparing the surface complete.
Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5cm.
Tear strength in longitudinal and transverse direction as 60/80N. Softening point of
membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in
the authorised applicator of the manufacturer of membrane:
22.19.1 3 mm thick
MATERIALS :
A.P.P. modified 3mm thick =-30 sqm
Add 10% for wastage 3 sqm. Total 33 sqm
8204 A.P.P. modified 3 mm thick membrance sqm 33.00 185.00 6 105.00
reinforced with glass fibre matt
8206 Bitumen primer for bitumen membrance litre 12.00 54.00 648.00
9999 Carriage of bitumen membrance L.S. 7.80 1.00 7.80
1241 Fuel LPG kg 7.00 35.00 245.00
9999 Preparing roof surface, cutting grooves L.S. 49.53 1.00
49.53 LABOUR:
0130 Mistry Day 0.18 151.50 27.27
0114 Beldar Day 3.24 135.25 438.21
TOTAL 7872.09
TOTAL 7950.81
Say 304.80
22.20 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated
five layer 3mm thick water proofing membrane, black finished reinforced with non-
woven polyester matt consisting of a coat of bitumen primer for bitumen membrane
@ 0.40 ltr/sqm. by the same membrane manufacturer of density at 25°C, 0.87-0.89
kg/ltr and viscosity 70-160 cps. Over the primer coat the layer of membrane shall be
laid using Butane Torch and sealing all joints etc., and preparing the surface complete.
Joint strength in longitudinal and transverse direction at 23°C as 650/450N/5cm.
Tear strength in longitudinal and transverse direction as 300/250N. Softening point
of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in
the authorised applicator of the manufacturer of membrane.
1224
22.20.1 3 mm thick

MATERIALS :
A.P.P. modified 3mm thick - 30 sqm
Add 10% for wastage = 3 sqm.
Total = 33 sqm
8205 A.P.P. modified 3 mm thick membrance sqm 33.00 221.00 7 293.00
reinforced with polyster matt
8206 Bitumen primer for bitumen membrane litre 12.00 54.00 648.00
9999 Carriage of bitumen membrane L.S. 7.80 1.00 7.80
1241 Fuel LPG kg 7.00 35.00 245.00
9999 Preparing roof surface, cutting grooves L.S. 49.53 1.00 49.53
LABOUR:
0130 Mistry Day 0.18 151.50 27.27
0114 Beldar Day 3.24 135.25 438.21
TOTAL 9060.09
TOTAL 9150.69
Say 350.80
22.21 Extra for covering top of membrane with Geotextile, 120gsm non woven, 100%
polyester of thickness 1 to 1.25mm bonded to the membrane with intermittent touch
by heating the membrane by Butane Torch as per manufactures recommendation
[for Item No. 25.18 to 25.20]
MATERIALS :
Geotextile 120 gsm membrane =30 sqm
Add 5% for wastage = 1.5 sqm. Total 31.50m2
8207 Geotextile 120 gsm membrance sqm 31.50 25.00 787.50
9999 Carriage of Geotextile L.S. 7.80 1.00 7.80
LABOUR:
0159 Skilled torch operator or fitter 2.16  5 = 0.43 Day 0.43 151.50 65.14
0130 Mistry 0.18-5 = 0.04 Day 0.04 151.50 6.06
0114 Beldar 3.24-5 = 0.65 Day 0.65 135.25 87.91
9999 Sundries, torch, LPG etc L.S. 46.80 1.00 46.80
TOTAL 1001.21
TOTAL- 1011.22
Say 38.75
1225
SUB HEAD : 23.0

HORTICULTURE
AND
LAND SCAPING
1227
23.1 Trenching in ordinary soil upto a depth of 60cm including removal and stacking of
serviceable materials and then disposing of by spreading and neatly levelling with
in a lead of 50m and making up the trenched area to proper levels by filling with
earth or earth mixed with sludge or/and manure before and after flooding trench
with water (excluding cost of imported earth, sludge or manure).

Labour
0114 Beldar Day 0.71 135.25 96.03
9999 Sundries L.S 2.73 1.00 2.73
0115 collies Day 0.35 135.25 47.34
TOTAL 146.10
TOTAL 147.56
Cost per 10 cum. 169.69
Cost per cum 16.97
Say 16.95
23.2 Supplying and stacking of good earth at site including royalty and carriage upto 1
km (earth measured in stacks will be reduced by 20% for payment).

Excavation:
0114 Beldar Day 0.177 135.25 23.94
0115 Coolies Day 0.107 135.25 22.59
2241 Carriage of good earth by mechanical cum 1.00 66.51 66.51
transport upto 1 km lead
TOTAL 124.04
TOTAL 125.28
Say 144.05
1228
23.3 Supplying and stacking sludge at site including royalty and carriage upto 1 km (sludge
measured in stacks will be reduced by 8% for payment),

2317 Carriage of sludge by mechanical transport cum 1.00 57.83 57.83
upto 1 km lead
0980 Royalty of sludge cum 1.00 60.00 60.00
TOTAL 117.83
TOTAL 119.01
Say 136.85
23.4 Supplying and stacking at site dump manure from Badli or other approved source,
including carriage upto 1 km manure measured in stacks will be reduced by 8% for
payment):
23.4.1 Screened through sieve of I.S. designation 20mm

2242 Carriage of dump manure (by mechanical cum 1.00 57.83 57.83
transport)
Labour for screening:
0114 Beldar Day 0.08 135.25 10.82
9999 Sundries L.S 2.73 1.00 2.73
TOTAL 71.38
TOTAL 72.09
Cost per cum. 82.90
Say 82.90
including carriage upto 1 km manure measured in stacks will be reduced by 8% for
payment):
23.4.2. Screened through sieve of I.S. designation 16 mm

transport)
Labour for screening :
0114 Beldar Day 0.13 135.25 17.58
9999 Sundries L.S 2.73 1.00 2.73
TOTAL 78 14
TOTAL- 78.92
Cost per cum. 90.76
Say 90.75
1229
including carriage upto (manure measured in stacks will be reduced by 8% for pay-
ment):
23.4.3 Screened through sieve of I.S. designation 4.75mm

transport)
Labour for screening :
0114 Beldar Day 0.17 135.25 22.99
9999 Sundries L.S 2.73 1.00 2.73
TOTAL 83.55
TOTAL 84.39
Cost per cum. 97.05
Say 97.05
23.5 Rough dressing the trenched ground including breaking clods.

Details of cost for 1OO.00sqm.

Labour:
0114 Beldar Day 0.20 135.25 27.05
9999 Sutndries L.S 1.43 1.00 1.43
Total 28.48
Total 28.76
Cost for 100.00 Sqm. 33.07
Say 33.05
23.6 Uprooting weeds from the trenched area after 10 to 15 days of its flooding with
water including disposal of uprooted vegetation.
Details of cost for 100 .00sqm.

Labour:
0114 Beldar Day 0.33 135.25 44.63
0115 Coolies Day 0.33 135.25 44.63
9999 Sundries L.S 2.73 1.00 2.73
Total 91.99
Total 92.91
Cost for 100 Sqm. 106.85
1230
23.7 Fine dressing the ground.

Labour:
0114 Beldar Day 0.50 135.25 67.62
9999 Sundries L.S 1.43 1.00 1.43
TOTAL 69.05
TOTAL 69.74
Say 80.20
23.8 Spreading of sludge, dump manure or/and good earth in required thickness (Cost of
sludge, dump manure or/ and good earth to be paid separately).

Labour:
0114 Beldar Day 0.07 135.25 9.47
9999 Sundries L.S 0.52 1.00 0.52
TOTAL 9.99
TOTAL 10.09
Say 11.60
23.9 Mixing earth and sludge or manure in proportion specified or directed.

Labour:
0114 Beldar Day 0.25 135.25 33.81
0115 Coolies Day 0.25 135.25 33.81
TOTAL 67.62
TOTAL 68.30
Say 7.85
1231
23.10 Grassing with ‘Doob’ grass including watering and maintenance of the lawn for 30
days or more till the grass forms a thick lawn free from weeds and fit for mowing
including supplying good earth if needed (the good earth shall be paid for sepa-
rately).
23.10.1 In rows 15 cm apart in either direction.

Labour:
0114 Beldar Day 0.25 135.25 33.81
0115 Coolies Day 0.50 135.25 67.82
9999 Sundries L.S 2.73 1.00 2.73
TOTAL 104.16
TOTAL 105.20
Say 121.00
rately).
23.10.2 In rows 7.5 cm apart in either direction.

Labour:
0114 Beldar Day 0.25 135.25 67.62
0115 Coolies Day 1.06 135.25 143.37
9999 Sundries L.S 5.33 1.00 5.00
TOTAL 216.32
TOTAL 218.47
Say 251.25
1232
rately).
23.10.3 In rows 5 cm apart in either direction.

Labour:
0114 Beldar Day 0.80 135.25 108.20
0115 Coolies Day 1.00 135.25 218.40
9999 Sundries L.S 6.76 1.00 6.76
TOTAL 331.36
TOTAL 334.67
Say 384.85
23.11 Renovating lawns including weeding, cheeling the grass, forking the ground, top
dressing with sludge or manure, mixing the same with forked soil, watering and
maintaining the lawn for 30 days or more till the grass forms a thick lawn free from
weeds and fit for mowing and disposal of rubbish as directed, including supplying
good earth if needed but excluding the cost of sludge or manure (the good earth
shall be paid for separately).
Code Discription Unit Quantity Rate Amount

Labour:
0114 Beldar Day 2.70 135.25 365.18
0115 Coolies Day 5.00 135.25 270.50
9999 Sundries L.S 2.73 1.00 2 .73
TOTAL 638.41
TOTAL 644.79
Say 741.50
1233
23.12 Uprooting rank vegetation and weeds by digging the area to a depth of 60cm remov-
ing all weeds and other growth with roots by forking repeatedly, breaking clods,
rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days
and then fine dressing for planting new grass, including disposal of all rubbish with
all leads and lifts.

1. Labour for trenching to a depth of 30cm-
0114 Beldar Day 1.50 135.25 202.88
0115 Coolies Day 0.75 135.25 101.44
2. Labour for forking to remove weeds and
rank vegetation-
0114 Beldar Day 1.00 135.25 135.25
0115 Coolie Day 0.50 135.25 67.62
3. Labour for trenching to a further depth of
30cm-
0114 Beldar Day 2.13 135.25 288.08
0115 Coolie Day 1.06 135.25 143.36
4. Removal of weeds from the trenched area
with 10 to 15 days of its flooding with water
as per item No. 23.6
0114 Beldar Day 0.33 135.25 44.63
0115 Coolie Day 0.33 135.25 44.63
9999 Sundries L.S. 2.73 1.00 2.73
5. Rough dressing as per item No. 23.5
0114 Beldar Day 0.20 135.25 27.05
9999 Sundries L.S. 1.43 1.00 1.43
6. Fine dressing as per item No. 23.7
0114 Beldar Day 0.50 135.25 67.62
9999 Sundries L.S. 1.43 1.00 1.43
9999 Sundries L.S. 6.76 1.00 6.76
TOTAL 1 134.91
Add 1 % for water charges on A 11.35
TOTAL 1 146.26
on (A+B)
Say 1 318.20
1234
23.13 Preparation of beds for hedging and shrubbery by excavating 60cm deep and trench-
ing the excavated base to a further depth of 30cm, refilling the excavated earth after
breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked
volume of earth after reduction by 20% : one part of stacked volume of sludge or
manure after reduction by 8%), flooding with water, filling with earth if necessary,
watering and finally fine dressing, levelling etc. including stacking and disposal of
materials declared unserviceable and surplus earth by spreading and levelling as
directed, within a lead of 50m lift upto 1.5 m complete (cost of sludge, manure or
extra earth to be paid for separately).

Labour:
0114 Beldar Day 1.80 135.25 243.45
0115 Coolies Day 1.25 135.25 169.06
TOTAL 412.51
TOTAL 416.64
Cost per cum 47.91
Say 47.90
23.14 Digging holes in ordinary soil and refilling the same with the excavated earth mixed
with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of
earth after reduction by 20% : 1 part of stacked volume of manure after reduction by
8%) flooding with water, dressing including removal of rubbish and surplus earth, if
any with all leads and lifts (cost of manure, sludge or extra good earth if needed to
be paid for separately) ;-
23.14.1 Holes 1.2 m dia and 1.2 m deep.
Details of cost for one hole-

Extra Excavation-
22/7x(1.2)2/4x1.2 = 1.36 cum.
(A) Rate vide item No. 2.8.1 Earth work cum 1.36 103.40 140.62
9999 Refilling mixture and flooding L.S 5.10 1.00 5.20
TOTAL 145.82
TOTAL 145.87
Cost per hole 146.66
Say 146.65
1235
23.14 Digging holes in ordinary soil and refilling the same with the excavated earth mixed
with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of
earth after reduction by 20% : 1 part of stacked volume of manure after reduction by
8%) flooding with water, dressing including removal of rubbish and surplus earth, if
any with all leads and lifts (cost of manure, sludge or extra good earth if needed to
be paid for separately) ;-
23.14.2 Holes 60 cm dia and 60 cm deep.
Details of cost for one hole-

Extra Excavation-
22x(0.6)2/4x0.60=0.17cum
(A) Rate vide item no. 2.8.1. Earth work cum 1.17 103.40 17.58
9999 Refilling mixture and flooding L.S 1.43 1.00 1.43
TOTAL 19.01
TOTAL 19.02
Cost per hole 19.24
Say 19.25
23.15 Half brick circular tree guard in 50 class designation bricks, internal diameter 1.25
metre and height 1.2 metre above ground and 0.20 m below ground bottom two
courses laid dry and top three courses in lime mortar 1:2 (1 lime putty : 2 surkhi) or
cement mortar 1:6 (1 cement : 6 fine sand) and the intermediate courses being in dry
honey comb masonry as per design complete:
23.15.1 With F.P.S. Bricks
Details of cost for one tree guard

Materials:
2603 Brick 3rd class 1000 Nos 230 1700.00 391.00
2201 Carriage of bricks 1000 Nos 230 141.88 32.63
9999 Lime or cement mortar top 3 courses L.S 15.86 1.00 15.86
Labour:
0114 Beldar Day 0.25 135.25 33.81
9999 Sundries L.S 4.16 1.00 4.16
TOTAL 512.86
TOTAtr- 517.99
Cost per tree guard 595.69
Say 595.70
1236
23.16 Providing and fixing M.S. flat iron tree guard 60cm dia. and 2m height above ground
level formed of 4 nos. 25x6mm and 8 nos. 25x3mm vertical M.S. flats rivetted to 3
nos. 25x6mm M.S. flat iron rings in two halves, bolted together with 8mm dia. and
30mm long bolts including painting two coats with paint of approved brand and
manufacture over a coat of priming, complete in all respects.
Details of cost for one tree guard-

materials
M.S. Flats:- 25x6mm
vertical 4x2.25= 9.00m
25x6mm rings
3x(22/7x0.6)+0.16 = 6.14m
Total = 15.14m
wt. @ 1.2kg per m = 18.17kg.
25x3.00mm verticals 8x2= 16m
16.00x0.25=0.40 sqm.
wt. @24.73kg/sqm. = 9.89kg.
Total M.S. Flats = 28.06kg +
wastage @5% = 1.40kg
Total = 29.46kg.
1008 Say 0.29 quintal quintal 0.29 2 900.00 841.00
9999 Rivets 36 nos. L.S. 40.30 1.00 40.30
9999 G.I. Bolts and nuts L.S. 8.06 1.00 8.06
2205 Crriage of material tonne 0.029 47.29 1.37
Labour:
0114 Beldar Day 1.00 135.25 135.25
Painting-
4x2x0.03x2.0 = 0.496+
8x2x0.028x2.00 = 0.896+
2x6.14x0.031 =0.381
Total = 1.773
Say 1.77 sqm.
(A) (Rate as per item No. 13.50.4 of S.H. sqm 1.77 7.15 12.66
Finishing)
(B) (Rate as per item No. 13.61.1 of S.H. sqm 1.77 35.35 62.57
Finishing)
TOTAL 1384.41
Add 1% for water charges on all except ‘A’ and’ B 13.09
TOTAL 1391.50
Add, 15% for contractor’s profit and overheads 198.34
on all except ‘A’ and’ B’
Cost for one tree guard 1595.84
Say 1595.85
1237
23.17 Making tree guard 53 cm dia. and 1.3 m high as per design from empty coal tar
drums supplied free by the department including providing and fixing 2 nos. M.S.
sheet rings 50 x 0.5 mm with rivets complete in all respects including painting inside
and outside of tree guard with :
23.17.1 A coat of coal tar.
Details of cost for one tree guard.

9999 Cost of 2 putties L.S 13.39 1.00 13.39
9999 Cost of 6mm dia xl0 mm rivets 22 nos L.S 26.91 1.00 26.91
9999 Fire wood L.S 2.73 1.00 2.73
Labour:
0114 Beldar Day 0.07 135.25 9.47
9999 Sundries L.S 1.43 1.00 1.43
Coal tarring alround inside and outside
1/2 x 2 x 22/7 x 0.53 x 1.30 = 2.16.
(A) (Rate as per item No. 13.59 of S.H. sqm 2.16 14.65 31.64
Finishing)
TOTAL 103.98
TOTAL 104.70
Cost for one free guard 115.66
Say 115.65
23.17 Making tree guard 53 cm dia. and 1.3 m high as per design from empty coal tar
drums supplied free by the department including providing and fixing 2 nos. M.S.
sheet rings 50 x 0.5 mm with rivets complete in all respects including painting inside
and outside of tree guard with :
23.17.2 Two or more coats of synthetic enamel paint of approved quality shade over a
priming coat
Details of cost for one tree guard.

Cost of one free guard
(Rate as per Item No. 23.17.1) each 1.00 115.65 115.65
Priming coat
(Rate as per item no. 13.50.3 of SH : Finishing) sqm 2.16 12.65 27.32
(Rate as per item no. 13.61.1 of SH : Finishing) sqm 2.16 33.35 76.36
Less cost of coal tarring (Rate as per item no.
13.59 of finishing). sqm 2.16 14.65 (–) 31.64
Cost of one tree guard. 187.69
Say 183.70
1238
23.18 Making tree guard 53 cm dia. and 2 m high as per design from empty coal tar
drums supplied free by the department including providing and fixing four legs 40
cm long of 30 x 3 mm M.S. flat riveted to tree guard and providing and fixing 2 nos.
M.S. sheet rings 50 x 0.5 mm with rivets complete in all respects including painting
inside and outside of tree guard with :
23.18.1 A coat of coal tar.

9999 Cost of two M.S. sheet rings 50x0.5mm L.S 13.52 1.00 13.52
9999 Cost of 6mm dia. rivets 10mm long 50 Nos. L.S 67.21 1.00 67.21
9999 Fire wood L.S 2.73 1.00 2.73
Labour :
0114 Beldar Day 0.10 135.25 13.52
9999 Sundries L.S 1.43 1.00 1.43
4 legs of M.S. flat 30x3mm including riveting
and other end sharpened for easing fixing the
tree guard in the ground 4 legs 0.4 each =
1.6m.
1.6x0.032=0.501sqm. @ 24.73kg/sqm. =1.26
kg = 0.013q
1008 Cost of M.S.flat quintal 0.013 2900.00 37.70
Carriage of M.S. flats (negligible)
Coal tarring alround inside and outside.
1/2x2x22/7x0.53x2.0 = 3.33sqm.
(A) (Rate as per item. 13.59 of S.H. sqm 3.33 14.65 48.78
Finishing)
TOTAL 211.79
TOTAL. 213.42
Cost for one tree guard 238.12
Say 238.10
1239
23.18 Making tree guard 53 cm dia. and 2 m high as per design from empty coal tar drums
supplied free by the department including providing and fixing four legs 40 cm long
of 30 x 3 mm M.S. flat riveted to tree guard and providing and fixing 2 nos. M.S. sheet
rings 50 x 0.5 mm with rivets complete in all respects including painting inside and
outside of tree guard with :
23.18.2 Two or more coats of synthetic enamel paint of approved quality and shade over
a priming coat.

Rate as per item no. 23.18.1 each 1.00 238.10 238.10
Applying priming coat
1
/2 x 2 x 22/7 x 0.53 x 2 = 3.33 sqm
(Rate as per item no. 13.50.3 of SH. finishing sqm 3.33 12.65 42.12
(Rate as per item no 13.61 of SH: Finishing) sqm 3.33 35.35 117.72
Less cost of coal tarring
(Rate as per item No. 13.59 of SH : finishing) sqm 3.33 14.65 (-) 48.78
Cost of one tree guard 349.16
Say 349.15
23.19 Edging with bricks laid dry length wise including excavation, refilling, consolidating
with hand packing and spreading neatly surplus earth within a lead of 50 m :
23.19.1 75 class designation.
23.19.1.1 F.P.S. Bricks
Details of cost for 10 m lenth-

Material :
2602 Bricks 75 class designation 1000 Nos 50.00 1900.00 95.00
2201 Carriage of bricks 1000 Nos 50.00 141.88 7.09
Labour
0115 Coolie Day 0.05 135.25 6.76
9999 Earth work in excavation and removal of L.S 13.52 1.00 13.52
rubbish (or spereading and dressing neatly of
surplus earth)
TOTAL 129.45
TOTAL 130.74
Add 15% for contrator’s profit and overheads 19.61
Cost per 10 m. 150.35
Cost per meter 15.04
Say 15.05
1240
23.19 Edging with bricks laid dry length wise including excavation, refilling,
consolidating with hand packing and spreading neatly surplus earth within a
lead of 50 m :
23. 19.2 50 designation.
23.19.2.1 F.P.S. bricks.
Details of cost for 10m length-

Material :
2603 Bricks 50 class .designation 1000 Nos 50.00 1700.00 85.00
2201 Carriage of bricks 1000 No 50.00 141.88 7.09
Labour
0115 Coolie Day 0.05 135.25 6.76
9999 Earth work in excavation and removal of L.S 13.52 1.00 13.52
rubbish (or spreading and dressing neatly of
surplus earth)
TOTAL 119.45
TOTAL- 120.64
Cost per 10m. 138.74
Cost per meter 13.87
Say 13.85
23.20 Filling mixture of earth and sludge or manure in the desired proportion in trenches,
flooding with water and levelling (cost of supplying earth and sludge or manure and
mixing excluded).

Labour:
0114 Beldar Day 0.17 135.25 22.09
0115 Coolies Day 0.08 135.25 10.82
TOTAL 33.81
TOTAL 34.15
Cost per cum. 3.93
Say 3.95
1241
23.21 Excavation in dumped stones or malba including stacking of serviceable and
unserviceable material separately and disposal of unserviceable material lead upto
50 m and lift upto 1.5 m disposed material to be neatly dressed.
Labour:
0114 Beldar Day 0.35 135.25 47.34
0115 Coolies Day 0.35 135.25 47.34
TOTAL 94.68
TOTAL 95.63
Say 109.95
23.22 Excavation in bajri path including stacking of serviceable and unservicable material
lead upto 50m and lift upto 1.5m disposed material to be neatly dressed.
Labour:
0114 Beldar Day 0.43 135.25 58.16
0115 Coolies Day 0.35 135.25 47.34
TOTAL 105.50
TOTAL 106.56
Say 122.55
23.23 Excation in water bound macadam road including stacking the srviceable and un-
serviceable material separately and disposal of unservuceabke materil lead upto 50
m and lift upto 1.5 m disposed material to be neatly dressed.

labour:
0114 Beldar Day 0.53 135.25 71.68
0115 Coolie Day 0.43 135.25 58.16
TOTAL 129.84
TOTAL 131.14
Say 150.80
23.24 Flodding the ground with water including making kiaries and dismantling the same.
labour:
0114 Beldar Day 0.17 135.25 22.99
9999 Sundries L.S. 35.88 1.00 35.88
TOTAL 58.87
TOTAL 59.46
Cost per 100 sqm. 68.38
Say 68.40
1242
S.NO. Correction Slip No. Reference No. Contents in Brief

Analysis of Rates 07 Vol - 2

Uploaded by

Copyright:

Available Formats

Analysis of Rates 07 Vol - 2

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Analysis of Rates 07 Vol - 2

Uploaded by

Copyright:

Available Formats

Kindly Save this file on desired location in your computer

A GOVERNMENT OF INDIA PUBLICATION

JAIN BOOK AGENCY (SOUTHEND) JAIN BOOK AGENCY (GURGAON)

3.0 DAR, 2007 is a bilingual document (Hindi version will follow).

4.0 DAR, 2007 is published in two volumes as under:

Volume Number Sub-head No. Contents/ Chapters

13. Finishing 583-635

14. Repairs to Buildings 637-692

15. Dismantling & Demolishing 693-729

16. Road Work 731-817

17. Sanitary Installation 819-900

18. Water Supply 901-1067

19. Drainage 1069-1152

20. Pile Work 1153-1178

21. Aluminium Work 1179-1203

22. Water Proofing 1205-1224

23. Horticulture and Landscaping 1225-1241

Note: For Sub Heads 1 to 12 refer to Vol.1

SUB HEAD : 13.0

Detail of cost for 10 sqm

13.1 12 mm cement plaster of mix:

Detail of cost for 10 sqm

Detail of cost for 10 sqm

Code Description Unit Quantity Rate Amount

Add 1% for water charges 7.78

Detail of cost for 10 sqm

13.1 20 mm cement plaster of mix

Code Description Unit Quantity Rate Amount

Detail of cost for 10 sqm

13.3 20 mm cement plaster of mix

Code Description Unit Quantity Rate Amount

Detail of cost for 10 sqm

13.4 12 mm cement plaster of mix

Code Description Unit Quantity Rate Amount

Detail of cost for 10 sqm

13.4 12 mm cement plaster of mix

Code Description Unit Quantity Rate Amount

Code Description Unit Quantity Rate Amount

Detail of cost for 10 sqm

Code Description Unit Quantity Rate Amount

Detail of cost for 10 sqm

13.6 20 mm cement plaster of mix : -

Code Description Unit Quantity Rate Amount

Detail of cost for 10 sqm

13.6 20 mm cement plaster of mix :

Code Description Unit Quantity Rate Amount

Detail of cost for 10 sqm

Code Description Unit Quantity Rate Amount

Detail of cost for 10 sqm

Code Description Unit Quantity Rate Amount

Detail of cost for 10 sqm

Detail of cost for 10 sqm

Code Description Unit Quantity Rate Amount

Code Description Unit Quantity Rate Amount

Detail of cost for 10 sqm

Detail of cost for 10 sqm

Code Description Unit Quantity Rate Amount

Detail of cost for 10 sqm

Code Description Unit Quantity Rate Amount