CH 1 Unit Measurement

CH 1 Units and Measurements Physics
2.1. Fill in the blanks

(a) The volume of a cube of side 1 cm is equal to.....m 3
(b) The surface area of a solid cylinder of radius 2.0 cm and height 10.0 cm is equal
to ... (mm)2
(c) A vehicle moving with a speed of 18 km h1covers....m in 1 s
(d) The relative density of lead is 11.3. Its density is ....g cm 3or . ...kg m3.
Answer
(a) Length of edge = 1cm = 1/100 m

Volume of the cube = side3
Putting the value of side, we get
Volume of the cube = (1/100 m)3
The volume of a cube of side 1 cm is equal to 10-6 m3
(b) Given,
Radius, r = 2.0 cm = 20 mm (convert cm to mm)
Height, h = 10.0 cm =100 mm
The formula of total surface area of a cylinder S = 2r (r + h)
Putting the values in this formula, we get
Surface area of a cylinder S = 2r (r + h = 2 x 3.14 x 20 (20+100)
= 15072 = 1.5 104 mm2
The surface area of a solid cylinder of radius 2.0 cm and height 10.0 cm is equal to 1.5
104 mm2
(c) Using the conversion,

Given,
Time, t = 1 sec
speed = 18 km h-1 = 18 km / hour
1 km = 1000 m and 1hour = 3600 sec
Speed = 18 1000 /3600 sec = 5 m /sec
Use formula
Speed = distance / time
Cross multiply it, we get
Distance = Speed Time = 5 1 = 5 m
A vehicle moving with a speed of 18 km h1covers 5 m in 1 s.
(d) Density of lead = Relative density of lead Density of water
Density of water = 1 g/cm3
Putting the values, we get
Density of lead = 11.3 1 g/ cm3
= 11.3 g cm-3
1 cm = (1/100 m) =102 m3
1 g = 1/1000 kg = 10-3 kg
Density of lead = 11.3 g cm-3 = 11.3
Putting the value of 1 cm and 1 gram
11.3 g/cm3 = 11.3 10-3 kg (10-2m)-3 = 11.3 103 106 kg m-3 =1.13 103 kg m3
The relative density of lead is 11.3. Its density is 11.3 g cm-3 g cm3 or 1.13 103 kg m3.
2.2. Fill in the blanks by suitable conversion of units:

(a) 1 kg m2s2= ....g cm2 s2
(b) 1 m =..... ly
(c) 3.0 m s2=.... km h2
(d) G= 6.67 1011 N m2 (kg)2=.... (cm)3s2 g1.
Answer
(a) 1 kg = 103 g
1 m2 = 104 cm2
1 kg m2 s2 = 1 kg 1 m2 1 s2
=103 g 104 cm2 1 s2 = 107 g cm2 s2
1 kg m2s2= 107 g cm2 s2
(b) Distance = Speed Time

Speed of light = 3 108 m/s
Time = 1 year = 365 days = 365 24 hours = 365 24 60 60 sec
Putting these values in above formula we get
1 light year distance = (3 108 m/s) (365 24 60 60 s) = 9.46 1015 m
9.46 1015 m = 1 ly
So that 1 m = 1/ 9.46 1015 ly = 1.06 10-16 ly
(c) 1 hour = 3600 sec so that 1 sec = 1/3600 hour

1 km = 1000 m so that 1 m = 1/1000 km
3.0 m s2 = 3.0 (1/1000 km)( 1/3600 hour)-2 = 3.0 103 km ((1/3600)-2 h2)
= 3.0 103 km (3600)2 h2 = 3.88 104 km h2
3.0 m s2= 3.88 104 km h2
(d) Given,
G= 6.67 1011 N m2 (kg)2
We know that
1 N = 1 kg m s2
1 kg = 103 g
1 m = 100 cm = 102 cm
Putting above values, we get
6.67 1011 N m2 kg2 = 6.67 1011 (1 kg m s2) (1 m2) (1Kg2)
Solve and cancel out the units we get
6.67 1011 (1 kg1 1 m3 1 s2)
Putting above values to convert Kg to g and m to cm
6.67 1011 (103 g)-1 (102 cm)3 (1 s2)
6.67 1011 10-3 g-1 106 cm3 (1 s2)
6.67 108 cm3 s2 g1
G= 6.67 1011 N m2 (kg)2= 6.67 108 (cm)3s2 g1.
2.3. A calorie is a unit of heat or energy and it equals about 4.2 J where 1J = 1 kg m 2s2.
Suppose we employ a system of units in which the unit of mass equals kg, the unit of
length equals m, the unit of time is s. Show that a calorie has a magnitude 4.2 1
2 2
in terms of the new units.
Answer
Given that,
1 Calorie=4.2 J = 4.2 Kg m2 s-2 ...... (i)
As new unit of mass = Kg
1 Kg = 1/ new unit of mass
Similarly, 1 m = -1 new unit of length
1 s = -1 new unit of time
Putting these values in (i), we get
1 calorie = 4.2 (-1 new unit of mass) (-1 new unit of length)2 (-1 new unit of time)-2
= 4.2 -1 -2 2 new unit of energy (Proved)
2.4. Explain this statement clearly:

To call a dimensional quantity 'large' or 'small' is meaningless without specifying a
standard for comparison. In view of this, reframe the following statements wherever
necessary:
(a) atoms are very small objects
(b) a jet plane moves with great speed
(c) the mass of Jupiter is very large
(d) the air inside this room contains a large number of molecules
(e) a proton is much more massive than an electron
(f) the speed of sound is much smaller than the speed of light.
Answer
The given statement is true because a dimensionless quantity may be large or small in
comparision to some standard reference. For example, the coefficient of friction is
dimensionless. The coefficient of sliding friction is greater than the coefficient of rolling
friction, but less than static friction.
(a) An atom is a very small object in comparison to a soccer ball.
(b) A jet plane moves with a speed greater than that of a bicycle.
(c) Mass of Jupiter is very large as compared to the mass of a cricket ball.
(d) The air inside this room contains a large number of molecules as compared to that
present in a geometry box.
(e) A proton is more massive than an electron.
(f) Speed of sound is less than the speed of light.
2.5. A new unit of length is chosen such that the speed of light in vacuum is unity. What
is the distance between the Sun and the Earth in terms of the new unit if light takes 8
min and 20 s to cover this distance?
Answer
Distance between the Sun and the Earth = Speed of light x Time taken by light to cover
the distance
Given that in the new unit, speed of light = 1 unit
Time taken, t = 8 min 20 s = 500 s
Distance between the Sun and the Earth = 1 x 500 = 500 units
2.6. Which of the following is the most precise device for measuring length:
(a) a vernier callipers with 20 divisions on the sliding scale
(b) a screw gauge of pitch 1 mm and 100 divisions on the circular scale
(c) an optical instrument that can measure length to within a wavelength of light?
Answer
(a) Least count of this vernier callipers = 1SD - 1 VD = 1 SD - 19/20 SD = 1/20 SD

= 1.20 mm = 1/200 cm = 0.005 cm
(b) Least count of screw gauge = Pitch/Number of divisions = 1/1000 = 0.001 cm.
(c) Wavelength of light, 10-5 cm = 0.00001 cm
Hence, it can be inferred that an optical instrument is the most suitable device to
measure length.
2.7. A student measures the thickness of a human hair by looking at it through a
microscope of magnification 100. He makes 20 observations and finds that the average
width of the hair in the field of view of the microscope is 3.5 mm. What is the estimate
on the thickness of hair?
Answer
Magnification of the microscope = 100

Average width of the hair in the field of view of the microscope = 3.5 mm
Actual thickness of the hair is 3.5/100 = 0.035 mm.
2.8. Answer the following:
(a) You are given a thread and a metre scale. How will you estimate the diameter of the
thread?
Answer
Wrap the thread on a uniform smooth rod in such a way that the coils thus formed are
very close to each other. Measure the length of the thread using a metre scale. The
diameter of the thread is given by the relation,
Diameter = Length of thread/Number of turns
(b) A screw gauge has a pitch of 1.0 mm and 200 divisions on the circular scale. Do you
think it is possible to increase the accuracy of the screw gauge arbitrarily by increasing
the number of divisions on the circular scale?
Answer
It is not possible to increase the accuracy of a screw gauge by increasing the number of
divisions of the circular scale. Increasing the number divisions of the circular scale will
increase its accuracy to a certain extent only.
(c) The mean diameter of a thin brass rod is to be measured by vernier callipers. Why is
a set of 100 measurements of the diameter expected to yield a more reliable estimate
than a set of 5 measurements only?
Answer
A set of 100 measurements is more reliable than a set of 5 measurements because

random errors involved in the former are very less as compared to the latter.
2.9. The photograph of a house occupies an area of 1.75 cm 2on a 35 mm slide. The
slide is projected on to a screen, and the area of the house on the screen is 1.55 m 2.
What is the linear magnification of the projector-screen arrangement?
Answer
Area of the house on the slide = 1.75 cm 2

Area of the image of the house formed on the screen = 1.55 m 2 = 1.55 104 cm2
2.10. State the number of significant figures in the following:
(a) 0.007 m2
1
(b) 2.64 x 1024 kg

3
(c) 0.2370 g cm-3

4
(d) 6.320 J
4
(e) 6.032 N m-2

4
(f) 0.0006032 m2
4
Page No: 36
2.11. The length, breadth and thickness of a rectangular sheet of metal are 4.234 m,
1.005 m, and 2.01 cm respectively. Give the area and volume of the sheet to correct
significant figures.
Answer
Given that,
length, l = 4.234 m
breadth,b = 1.005 m
thickness, t = 2.01 cm = 2.01 10-2 m
Area of the sheet = 2 (l 0 + b t + t l) = 2 (4.234 1.005 + 1.005 0.0201 + 0.0201
4.234)
= 2 (4.3604739) = 8.7209478 m2
As area can contain a maximum of three significant digits, therefore, rounding off, we
get
Area = 8.72 m2
Also, volume = l b t
V = 4.234 1.005 0.0201 = 0.0855289 = 0.0855 m 3 (Significant Figures = 3)
2.12. The mass of a box measured by a grocer's balance is 2.300 kg. Two gold pieces
of masses 20.15 g and 20.17 g are added to the box. What is (a) the total mass of the
box, (b) the difference in the masses of the pieces to correct significant figures?
Answer
Mass of grocer's box = 2.300 kg

Mass of gold piece I = 20.15g = 0.02015 kg
Mass of gold piece II = 20.17 g = 0.02017 kg
(a) Total mass of the box = 2.3 + 0.02015 + 0.02017 = 2.34032 kg

In addition, the final result should retain as many decimal places as there are in the
number with the least decimal places. Hence, the total mass of the box is 2.3 kg.
(b) Difference in masses = 20.17 - 20.15 = 0.02 g

In subtraction, the final result should retain as many decimal places as there are in the
number with the least decimal places.
2.13. A physical quantity P is related to four observables a, b, c and d as follows:
The percentage errors of measurement in a, b, c and d are 1%, 3%, 4% and 2%,
respectively. What is the percentage error in the quantity P? If the value of P calculated
using the above relation turns out to be 3.763, to what value should you round off the
result?
Answer
Percentage error in P = 13 %
Value of P is given as 3.763.
By rounding off the given value to the first decimal place, we get P = 3.8.
2.14. A book with many printing errors contains four different formulas for the
displacement y of a particle undergoing a certain periodic motion:
(a = maximum displacement of the particle, v = speed of the particle. T = time-period of

motion). Rule out the wrong formulas on dimensional grounds.
Answer
The displacement y has the dimension of length, therefore, the formula for it should also
have the dimension of length. Trigonometric functions are dimensionless and their
arguments are also dimensionless. Based on these considerations now check each
formula dimensionally.
The formulas in (ii) and (iii) are dimensionally wrong .

CH 1 Unit Measurement

Uploaded by

Copyright:

Available Formats

CH 1 Unit Measurement

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

CH 1 Unit Measurement

Uploaded by

Copyright:

Available Formats

CH 1 Units and Measurements Physics

2.1. Fill in the blanks

(a) Length of edge = 1cm = 1/100 m

The volume of a cube of side 1 cm is equal to 10-6 m3

(c) Using the conversion,

2.2. Fill in the blanks by suitable conversion of units:

(b) Distance = Speed Time

(c) 1 hour = 3600 sec so that 1 sec = 1/3600 hour

2.4. Explain this statement clearly:

(a) Least count of this vernier callipers = 1SD - 1 VD = 1 SD - 19/20 SD = 1/20 SD

(c) Wavelength of light, 10-5 cm = 0.00001 cm

Magnification of the microscope = 100

2.8. Answer the following:

A set of 100 measurements is more reliable than a set of 5 measurements because

Area of the house on the slide = 1.75 cm 2

2.10. State the number of significant figures in the following:

(b) 2.64 x 1024 kg

(c) 0.2370 g cm-3

(e) 6.032 N m-2

Mass of grocer's box = 2.300 kg

(a) Total mass of the box = 2.3 + 0.02015 + 0.02017 = 2.34032 kg

(b) Difference in masses = 20.17 - 20.15 = 0.02 g

2.13. A physical quantity P is related to four observables a, b, c and d as follows:

(a = maximum displacement of the particle, v = speed of the particle. T = time-period of

The formulas in (ii) and (iii) are dimensionally wrong .

You might also like