Scribd
Upload
89 views

DTMF Controlled Robo Using Arduino

This document describes a DTMF-based home automation system that allows users to remotely control home appliances via a cell phone interface. It uses a DTMF decoder to interpret dial tones and an Arduino microcontroller to trigger relays connected to appliances. The system has advantages like remote control and energy savings but security and limited number of controllable appliances. Future work could include power backup, scheduling, and integrating with WiFi/IoT.

Uploaded by

Mikroc Thupati Srinivs
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
89 views

DTMF Controlled Robo Using Arduino

This document describes a DTMF-based home automation system that allows users to remotely control home appliances via a cell phone interface. It uses a DTMF decoder to interpret dial tones and an Arduino microcontroller to trigger relays connected to appliances. The system has advantages like remote control and energy savings but security and limited number of controllable appliances. Future work could include power backup, scheduling, and integrating with WiFi/IoT.

Uploaded by

Mikroc Thupati Srinivs
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 23

DTMF BASED HOME

AUTOMATION
Overview

Introduction
Block Diagram
Hardware Requirements
Software used
Advantages
Disadvantages
Future Work
References
Introduction

Design a system that allows users, upon


authentication, to remotely control multiple home
appliances using a cell phone-based interface.

Controlling of home appliances using Dual Tone


Multi Frequency (DTMF) technology.
DTMF (Dual Tone Multi Frequency)
A signaling system for identifying the keys or better says
the number dialed on a push button or DTMF keypad.
A multi-frequency tone dialing system used by the push
button keypads in phone and mobile sets to conveys the
number or key dialed by the caller.
DTMF has enabled the long distance signaling of dialing
numbers in voice frequency range over telephone lines.
DTMF as name suggests uses a combination of two sine
waves tones to represent a key.
Block Diagram
Hardware requirements
Arduino UNO
DTMF Decoder Module- HT9170D
12V Relay
Relay driver - ULN2003
Power Supply
Arduino UNO

The Arduino Uno is a microcontroller board


based on the ATmega328P.
It has 14 digital input/output pins (of which 6
can be used as PWM outputs), 6 analog inputs, a
16 MHz quartz crystal, a USB connection, a
power jack, an ICSP header and a reset button.
Simply connect it to a computer with a USB
cable or power it with a AC-to-DC adapter or
battery to get started.
The board...
Specifications
DTMF Decoder-HT9170D
Operating voltage: 2.5V~5.5V
Minimal external components
No external filter is required
Low standby current
Excellent performance
Tristate data output for MCU
interface
3.58MHz crystal or ceramic resonator
18-pin SOP package
Relay

Relay is basically an electromagnetic switch


which can be turn on and off by an applying
the voltage across its contacts.
In this project used a 12V 4-channel relay.
How Relay Works?
Relay Driver(ULN2003)
Why Relay Driver?

Relay safely driven by ULN2003 IC


Protect microcontroller from relay kick back
using integrated clamping diodes.
Has 7 high current Darlington arrays each
containing 7 open collector Darlington pairs
with common emitters.
Power Supply
Software Used..

Arduino IDE

Programming Languages Used..

Embedded C/C++
Advantages

It is a robust and easy to use system.


There is no need for extra training of that person who is
using it.
All the control would be in your hands by using this home
automation system.
One can control home appliances from anywhere.
It reduces wastage of electricity when we forgot to switch
off the lights & fans and gone outside.
It is very low cost compared to other technologies like
GSM.
Disadvantages

No security. Anyone can control the appliances by calling


the mobile connected to module.
Number of appliances is limited as our mobile can
generate only 16 tones.
Future Work

Memory can be used to store the appliance status


during power failure.
Appliance scheduler/timer can be implemented using
RTC (Real Time Clock)
Can be changes to an IoT device using WiFi
connectivity.
References

www.atmel.com

www.arduino.org

www.beyondlogic.org

www.wikipedia.org

www.elementzonline.com

www.elementztechblog.wordpress.com
Questions????
THANK YOU

You might also like