Sock palette Design System Software Operation Manual

Sock palette Design

System software

Operation Manual

ZheJiang Minde Automated Equipment Co.

Ltd
Tel: 0571-87995388

Zhejiang Minde Automated Equipment Co.Ltd 1

 Sock palette Design System Software Operation Manual

Contents

PART 1 FILE OPERATIONS................................................................................................3

NEW.........................................................................................................................................................3

1-2 OPEN.................................................................................................................................................4
1-3 SAVE..................................................................................................................................................4
1-4 SAVE AS............................................................................................................................................4
1-5 IMPORT BMP FILE...............................................................................................................................5
1-6 EXPORT BMP FILE..............................................................................................................................6
1-7 EXIT................................................................................................................................................6

PART 2 GRAPHICS EDITING.............................................................................................6

2-1 REVOCATION.......................................................................................................................................6
2-2 REPEAT..............................................................................................................................................7
2-3 SELECT ALL........................................................................................................................................7
2-4 SHEAR...............................................................................................................................................7
2-5 COPY.................................................................................................................................................7
2-6 PASTE................................................................................................................................................7

PART 3 SOFTWARE INTERFACE TO VIEW THE OPERATION..................................8

3-1 TOOLBAR............................................................................................................................................8
3-2 STATUS BAR.......................................................................................................................................8
3-3 DRAWING TOOLS..................................................................................................................................8
3-4 VIEW OF LINKAGE................................................................................................................................9
3-5 REFRESH VIEW....................................................................................................................................9

PART 4 GRAPHICAL DATA MANIPULATION................................................................9

4-1 HANAGATA CHECK................................................................................................................................9
4-2 CONTROL SETTINGS...........................................................................................................................10
4-2-1 Speed control settings............................................................................................................10
4-2-2 Circle the number of control settings.....................................................................................11
4-2-3 Chain parameters..................................................................................................................12
4-2-4 Main spindle parameters.......................................................................................................13
4-3 PROPERTIES.......................................................................................................................................13
4-4 SYSTEM PARAMETERS..........................................................................................................................14
4-5 MAIN SPINDLE CONFIGURATION SETTINGS...............................................................................................14
4-6 SELECT MODEL.................................................................................................................................15

PART 5 GRAPHICS WINDOW OPERATION.................................................................15

5-1 RESTORE VIEW..................................................................................................................................15
5-2 FIRST VIEW......................................................................................................................................16
5-3 THE SECOND VIEW..............................................................................................................................16

Zhejiang Minde Automated Equipment Co.Ltd 2

 Sock palette Design System Software Operation Manual

5-4 THE THIRD VIEW................................................................................................................................17

Part 1 File operations

new

1 When the user clicks on the new menu, Out the following

screen.

2 Users to set their own Knitting socks Hanagata after the

width and height. By determining. Software will
automatically generate Drawing the three as the size of
work area, Tim and yarn were the main spindle as well as
the rubber band, For users of the style of the socks used
to draw.

Zhejiang Minde Automated Equipment Co.Ltd 3

 Sock palette Design System Software Operation Manual

1-2 Open

① When a user clicks to open menu, Out the following screen,

Were Support 4F File (*.DSN). 5F File (*.CTL). 6F File (*.DAT). 6F
－Ⅱ File (*.DAP).

② Selected file types specified above. And in line with my

company's socks data format. Open the software will
automatically parse the file which contains information on a
flower-shaped. And display the drawing in the corresponding
area of work and production control of the flower-shaped
data.

1-3 Save

When a user clicks to open menu，Out the following screen，Were

Support 4F File (*.DSN). 5F File (*.CTL). 6F File (*.DAT). 6F － Ⅱ
File (*.DAP). The user needs to choose according to the
corresponding model file ， Then save. Attention: If this is
the form of open files, Do not jump out of the dialog box,
In accordance with the original file name and path to save
the file Hanagata.

1-4 Save As

When a user clicks to open menu ， Out the following screen ，Were

Zhejiang Minde Automated Equipment Co.Ltd 4

 Sock palette Design System Software Operation Manual

Support 4F File (*.DSN). 5F File (*.CTL). 6F File (*.DAT). 6F － Ⅱ

File (*.DAP). The user needs to choose according to the
corresponding model file，Then save.

1-5 Import BMP file

Bitmap import function is drawn in order to save users the time

pattern, Directly to the picture to be drawn into the work of
the region, Users need to pay attention to is the software,
Tim and the main spindle yarn only support 16-color bitmap
file(*.bmp), The band supported the 2-color bitmap file(*.bmp),
Operation are as follows:
1 When a user clicks into bitmap menu, Out the following

screen

2 Selected after the corresponding picture, Click to open

Zhejiang Minde Automated Equipment Co.Ltd 5

 Sock palette Design System Software Operation Manual

1-6 Export BMP file

Bitmap export function is to the user like patterns can be

saved, To the next need to use.
1 When the user clicks on menu bitmap export, Out the
following screen.

2 Save the location of the designated, And write the file

name, Click the Save.

1-7 EXIT

From the functional window is closed software, the end of the

use of this software.

Part 2 Graphics Editing

2-1 Revocation

Revocation refers to the function: When users feel that the

current drawn when there are problems, I would like to return

Zhejiang Minde Automated Equipment Co.Ltd 6

 Sock palette Design System Software Operation Manual

to a previous state, to carry out the operation to deal with.

2-2 Repeat

Repeat function is the means: When a user that too much time to
deal with withdrawal, would like to go back after the state
of the operation to deal with.

2-3 Select All

Select All function means: When a user that needs the work of
the current operation of selected areas, to carry out the
operation to deal with.

2-4 Shear

Cut refers to the function: When users feel that the selected
region are not satisfied with the need to remove the flower-
shaped, carried out the operation to deal with.

2-5 Copy

The function of reproduction is the means: When a user that the

selected region Hanagata multiple use needs to carry out the
operation to deal with.

2-6 Paste

Paste function means: When the user used the copy function of
shear or picture need to use to carry out the operation to
deal with.

Zhejiang Minde Automated Equipment Co.Ltd 7

 Sock palette Design System Software Operation Manual

Part 3 Software interface to view the

operation

3-1 Toolbar

Toolbar users refer to the more frequent use of the software

features a combination of the operation are displayed in a
toolbar, as follows.

Including: New, open, save, revocation, repeat, cut, copy,

paste, view, refresh, grid, cross cursor, Hanagata check,
control the speed settings, the control loop a few settings,
the color exchange, color conversion, printing, operating
system information.

3-2 Status Bar

Toolbar means users in the use of software in the current

operating conditions, as follows.

Including:The current state of operation, line number, column

number, color number, the system date and time.

3-3 Drawing tools

Drawing tools to draw Hanagata means of a series of graphics

operations portfolio, as follows.

Zhejiang Minde Automated Equipment Co.Ltd 8

 Sock palette Design System Software Operation Manual

Including:Selection, eraser, paintbrush, filling, check

color, zoom, straight, rectangular, round, text, 1 on 1
strip, 1 to 1 mesh, floating copy, multi-block replication,
turned around, flipped up and down , around the mirror, flip
mirror.

3-4 View of linkage

Linkage when the drawing view to enlarge the work area to pull
more than 4 times when the scroll bar, Tim yarn work area,
the main spindle work area, work area at the same time band
mobile. User-friendly operations to precise picture.

3-5 Refresh View

Refresh the view to re-work area is to show.

Part 4 Graphical data manipulation

4-1 Hanagata check

① When the user clicks on to export bitmap menu, jump out of

the following images to deal with a variety of different
models, it is necessary to check the data-processing
methods are also different.

Zhejiang Minde Automated Equipment Co.Ltd 9

 Sock palette Design System Software Operation Manual

② When the user select End models, the points identified.

Procedures to check for errors on their own. If you find an
error, we will report the wrong information, as well as the
location of.
③ Inspection at the same time, in the status column will show
the progress. To deal with the end, it will also jump out
of the corresponding message.

4-2 Control Settings

4-2-1 Speed control settings

Mainly used for speed control settings weaving machines, each

phase of the speed control, speed control when the user
clicks the menu settings, it will jump out of the following
interface.

Zhejiang Minde Automated Equipment Co.Ltd 10

 Sock palette Design System Software Operation Manual

4-2-2 Circle the number of control settings

Speed control loop set up primarily for the process of machine

knitting, weaving an area set up the need for repeated
operations, when the user clicks on the control settings
menu lap, it will jump out of the following interface.

Zhejiang Minde Automated Equipment Co.Ltd 11

 Sock palette Design System Software Operation Manual

4-2-3 Chain parameters

Chain parameters used to control the manufacturing process of

socks, each part of the action needed to set up speed, when
the user clicks on the chain parameter setting menu, it will
jump out of the following interface.

Zhejiang Minde Automated Equipment Co.Ltd 12

 Sock palette Design System Software Operation Manual

4-2-4 Main spindle parameters

Main spindle parameters set in the weaving process, the ways to

deal with the main spindle for yarn settings. When the user
clicks on the main spindle parameter setting menu, it will
jump out of the following interface.

4-3 Properties

Attribute is used to image height and width settings, and a

variety of models the same set of minimum Tim Barracuda yarn
spacing. When the user clicks on the properties menu, it will
jump out of the following interface.

Zhejiang Minde Automated Equipment Co.Ltd 13

 Sock palette Design System Software Operation Manual

4-4 System parameters

System parameters for the user to operate the main work area
drawing some of the details, such as the selection box border
thickness and color, partial view of the proportion of
observation, as well as the timing of the display grid. When
the user clicks on the properties menu, it will jump out of
the following interface.

4-5 Main spindle configuration settings

Main spindle configuration settings is used to configure some

kind of knitting process, the needs of those working shuttle,
as well as the exchange time between the shuttle. When the
user clicks on the main spindle configuration settings menu,
it will jump out of the following interface.

Zhejiang Minde Automated Equipment Co.Ltd 14

 Sock palette Design System Software Operation Manual

4-6 Select Model

Choice of models refers to the user to create models of socks in

order to generate a flower-shaped paper and machine operators
can match. When the user clicks on the menu choice models, it
will jump out of the following interface.

Part 5 Graphics window operation

5-1 Restore View

Refers to the software to start to restore the view is that the

framework structure, the specific pattern is as follows.

Zhejiang Minde Automated Equipment Co.Ltd 15

 Sock palette Design System Software Operation Manual

5-2 First View

The first view of the drawing refers to the work area, the only
operation carried out Tim yarn, and the specific pattern is as
follows.

5-3 The second view

The second view refers to the work area of the drawing, the
only operation for the main spindle, and the specific pattern
is as follows.

Zhejiang Minde Automated Equipment Co.Ltd 16

 Sock palette Design System Software Operation Manual

5-4 The third view

The third view is that this painting refers to the work area,
the rubber band can only be operated by the state, the
specific pattern is as follows.

Zhejiang Minde Automated Equipment Co.Ltd 17

Sock palette Design System Software Operation Manual

Zhejiang Minde Automated Equipment Co.Ltd 18

 Sock palette Design System Software Operation Manual

ZheJiang Minde Automated

Equipment Co. Ltd
Address：1A-2F,NO.16,5th Road,Xiyuan,Xihu
Science & Technology
Park,Hangzhou,China
TEL:0571-87995388
FAX:0571-87995388-805
Zip:310030
Web site:www.hzmind.com

Zhejiang Minde Automated Equipment Co.Ltd 19