Reproduction permitted provided source is given Subject to modification in the interest of technical progress 3520-0005-00ppr Feb 2007
(ofDiesel 20) - a member of the MAN Group MAN
MAN Diesel
Engine Diagnostics System
What & How:
Change to Chief or Crew Mode ..1
Make Performance Measurement ..2
Contents
CoCoS-EDS Quick Reference
Input / View Performance Data ..3
Perform Manual Diagnostics Evaluation ..4 View Diagnostic Details / History ..5 Store Line Recorder Data Dump ..6 Make Measurement from Line Recorder Zoom ..7 Calculate Fuel Oil Consumption ..8 View Load Diagram ..9 Monitor Parameters Over Time ..10 Copy Measurements to Excel ..11 Zoom with Mouse ..12 View / Set Display Attribute ..13 Print Pages to PDF..14
View System Log-Errors & Warnings ..17
Set Up New Display Group ..18 Modify Existing Display Group ..19 Export / Import Measurements ..20
Crew: System Overviews
Training ..21 System Overview: EDS & PMI ..22 Mode Indicators: On-line & Off-line ..23 Function & Keyboard Shortcuts ..24 Click Section to Open
CoCoS-EDS Quick Reference
Input / Adjust Operating Hours ..15
Special Maintenance: Assign LCV, Density & Static Values ..16
(of 20)
MAN Diesel
What & How
Change to Chief or Crew Mode
Change to Chief mode, by selecting:
System > Enter Password... in main menu and typing Chief (not chief nor CHIEF) Change back to standard user, i.e. Crew mode, by selecting: System > Passwords > Back in main menu.
Make Performance Measurement
A. Open PMI Analyzer if not already running
and make performance measurement based on one of the following: Recent PMI measurement In Crew mode select: Measurements > Read Pressure Curves and click OK. EDS automatically merges PMI data with Trend data with same the time stamps.
CoCoS-EDS Quick Reference
(of 20)
Old PMI measurement Note time stamp
of old PMI measurement and select: Monitoring > Line Recorder or click tool button. Next zoom in on the line recorder measurement consistent with date and time of old PMI measurement (i.e. drag mouse over it as in section 12) and click the green tool button2. Now go to Chief mode and select: Measurements > Read Pressure Curves1 Click Read Old Curves, select PMI measurement and click OK. Click OK and Add to Current. Verify Time stamps match and click OK.
1 & 2
See Notes on next page
MAN Diesel
Note that the mode indicator has changed
colour to red in upper right corner of EDS. See section 23.
What & How
Without PMI measurement select:
Measurements > Manual Input > Filtered Values EDS now returns to the off-line mode to show the measured values in the Standard Report.
B. Input off-line values from local gauges, such as
Pump/VIT index, VIT air pressure, ship speed, etc., in the report by clicking in the appropriate field and keying in the correct value from the keyboard. i Manually input values are marked with the
adjacent sign. If a manual value is deleted its
field will be reset to its original on-line value.
C. Store measurement by selecting:
Measurements > Store Measurements..., Go to Chief mode and key in or set correct date and/or operating hours for the measurement and click Save followed by Close.
If the PMI measurement lies
outside the line recorder time span, a compatible trend measurement with similar time stamp can be chosen by clicking on its grey indicator line in the Trend > Time Plot view. Thereafter, select the entry in the dialogue that is opened and click Load.
CoCoS-EDS Quick Reference
Notes: 1 EDS might prompt you to save an earlier measurement. Often it can be ignored, i.e click No to continue.
(of 20)
MAN Diesel
What & How
Input / View Performance Data
A. Open Performance Report sheets:
Select Reports > 1 Performance_Sheets .... If necessary: Use % Box in Toolbar to resize display and/or click tool button when in Chief mode. Click tabs shown to view other pages in report. B. Switch to Off-line mode by double-clicking the mode indicator in the upper right corner of EDS see 'Mode Indicator Table', section 23.
Off-line
EDS is now ready for manual input of measurement
data. C. Select relevant field and input data: Use Tab (or Shift Tab) keys to step forward (or back) and type in text from keyboard. i Switching back to on-line mode will not de
CoCoS-EDS Quick Reference
(of 20)
lete nor save data. Store measurement to save it
see section 2 c.
Perform Manual Diagnostics Evaluation
A. Select: Measurements > Measurements ... and from the dialogue load the stored engine performance measurement to be diagnosed. See Note1 in section 2. B. Select:
Measurements > Diagnostics.
EDS now evaluates the performance according to
the Instruction Book for the engine (Operation
MAN Diesel
What & How
Chapter 7) and returns to the Diagnosis overview
to give: diagnosis headlines if any to view details see section 5B, or status line prompt if no irregularities are present.
View Diagnostic Details / History
A. View current on-line diagnosis (if any)
Select: Diagnosis > Pending, or double-click the on-line diagnosis status indicators at bottom right of screen see table opposite.
B. Right-click diagnosis of interest and select one of
the following in pop-up menu to:
C. View past Diagnosis Select:
Diagnosis > Closed for a bar view of diagnosis history.
Store Line Recorder Data Dump
A. Open the line recorder database: System > Line Recorder Database B. Click Add button to store new line recorder dump.
CoCoS-EDS Quick Reference
acknowledge diagnosis, or view diagnosis values (see Note1, section 2), or view Instruction Book advice for restoring normal operation.
(of 20)
MAN Diesel
What & How
i Manual records are coloured green,
auto-matic records are black.
C. Click the new record to select it.
D. Click in comment field, key in a suitable description and click Update to store and OK to close.
Make Measurement from Line Recorder Zoom
A. Open line recorder database:
System > Line Recorder Database... B. Select desired record/dump and click Show. C. Define measurement period by zooming with mouse see section 12. D. Click green tool button. i EDS returns to Off-line mode to show standard
report giving average values for the zoomed period. The start/stop times (period) are also stored.
E. Remember to store measurement if needed
see section 2C.
CoCoS-EDS Quick Reference
(of 20)
Calculate Fuel Oil Consumption
A. Make Performance Measurement see section 2.
B. Open Performance Report for above measurement and click Consumption link or relevant page tab.
or
C. Input/verify fuel properties and flow meter/mass
counters. D. Click Performance Sheet link to go to Performance Report, page 1. E. Remember to store measurement if needed see section 2C.
MAN Diesel 9
A. Go to the Trend view:
Trend > Time Plots or click tool button. B. Do one or both of the following: Right-click in the view to open the Display Attributes dialogue and check at least one of the check boxes opposite, or
What & How
View Load Diagram
Mouse zoom to define the period of interest
see section 12. C. View Load Diagram: Monitoring > Load Diagram i The dots shown in the Load Diagram are the
points selected in the Trend view.
Monitor Parameters Over Time
10
A. Go to Trends view: Trend > Time Plots B. Right-click in any operating value plot to open its Display Attributes dialogue and set up its display.
C. Click tool button to reset (i.e. un-zoom)
display and view all trend entries.
Copy Measurements to Excel
A. Go to the Performance Table view: Monitoring > Performance Tables and select appropriate page tab.
11
CoCoS-EDS Quick Reference
As an example select Value option
opposite to see how the magnitude deviates from the nominal value over time or set Ambient Conditions as shown to see equivalent ISO values.
(of 20)
MAN Diesel
What & How
B. Right-click with mouse in any field to open Measurement ... dialogue.
C. Use the mouse to select one or more individual measurements: Left-click to select single entry Press Shift and left-click start and end to select group of entries, or Press Ctrl plus left-click to select non adjacent entries. D. Click Load button to display selected data in the performance table. E. Press Ctrl + C to copy. i EDS copies all values in performance table to
clipboard in comma separated format (CSV).
F.
Open an Excel sheet, press Ctrl + V or choose
Edit > Paste to paste copied data directly into the sheet.
MAN Diesel A. Click and hold down left mouse button while moving mouse: sideways for zooming time period, or up or down for zooming magnitude. B. Release mouse button to magnify (i.e. zoom in) on defined area.
What & How
To zoom:
Click tool button to zoom out and restore
view to original size.
View / Set Display Attributes
13
In most views right-clicking the mouse within a
curve opens a Display Attributes dialogue box. Examples of some of the attributes that may be chosen are shown below, but may differ to suit the particular view: Monitor particular cylinders, T/Cs or bearings, etc.
Set display limits.
Show Actual or ISO corrected
ambient conditions.
CoCoS-EDS Quick Reference
View time as running hours or
calendar time.
11 (of 20)
MAN Diesel
What & How
Show Actual values or deviation
from nominal. i Trend data are often most relevant in devia
tion from nominal (Act/Nom. Delta) value.
Print Pages to PDF
A. Select:
14
System > Print ...
B. Select a PDF Printer / Writer in the
'Print' dialogue. i The Cute PDF Writer is supplied as standard
with EDS. It is freeware available from www.
cutepdf.com.
C. Click Print and select or create a folder for
the pdf file in the 'Save PDF File' dialogue. Next type in a name for the file or accept the default file name 'EDS_ Printing pdf'.
CoCoS-EDS Quick Reference
12 (of 20)
D. Click Save to copy the current measurement or report sheet that is displayed to the specified folder ready to be archived or sent as e-mail.
Continued >
MAN Diesel 15
A. Change to Chief mode and open Operating
Hours dialogue: Tools > Setup > Operating Hours... B. Key in operating Hours plus minutes and click OK. C. Verify that the counter at the bottom left of the screen shows the same operating hours.
Assign LCV, Density & Static Values
16
Special Maintenance
Input / Adjust Engine Operating Hours
A. Change to Chief mode and open Static Values
dialogue: Tools > Setup > Static Values.... B. Click '+' symbols to open main parameter lists at top of dialogue. Double-click individual parameters to select and add them to the static value list. C. The appropriate static values may now be keyed-in in the static value list at the bottom of the dialogue. Press the Enter key at the end of each entry. D. Click OK to save your data and exit.
i Static values are marked by a Padlock
symbol.
View System Log Errors & Warnings
A. Check for errors and warnings: Look for status line prompts at bottom right-hand corner of screen, e.g.
17
CoCoS-EDS Quick Reference
E. Click the Standard Report tool button and
verify that the correct static values have been input in the Standard Report.
13 (of 20)
MAN Diesel
Special Maintenance
B. Open system log:
Select Tools > System Log or doubleclick status line error or warning prompt. C. Copy and send details: Make screen capture of system/warning log by pressing Prt Scr key on keyboard and pasting via clip board into word processing or paint application. Copy SYSTEM_ERROR.EDS file in EDS directory. Send above information to MBD if troubleshooting is necessary. D. Acknowledge error and warnings: Right-click within error/warning details field and click pop-up button to acknowledge and close.
Set Up New Display Group
A. Select the view requiring a new display group, e.g. Line Recorder, Standard Report, Trend, etc.
CoCoS-EDS Quick Reference
14 (of 20)
B. Change to Chief mode and open
'Display Groups' dialogue: Tools > Customise > Display Groups C. In Operating values field, doubleclick one or more parameters of interest in turn to highlight them and click the Select button. A new group is created at the bottom of Display Groups field.
18
MAN Diesel
Modify Existing Display Group
A. To edit a Display Group: Select (click) any group other than the one to be modified. B. Change to Chief mode and open Display Group dialogue: Tools > Customise > Display Groups...
19
Special Maintenance
D. Click the Ready button to close the
dialogue and use the Page Up/Down keys or tabs to select the last page containing the new display group.
C. Click the group to be modified in the Display group field and click the Edit button. D. To add new parameters: Double-click one or more items in turn in the Operating value field above the 'Display group' and click the Add button. The parameters are added to the appropriate group in the Display group field.
Alternatively, to delete an entire group
click OK to return to the group selection view, click the group to be deleted and then click the Delete button. F.
Click the Ready button to close the
dialogue and use the Page Up/Down keys or tabs to select the page containing the modified display group.
i EDS cannot change the active display group indicated by a red page number. To change group you must select another page.
CoCoS-EDS Quick Reference
E. To remove parameters: Click to select a parameter in the Display group field and click the Delete button.
15 (of 20)
MAN Diesel
Special Maintenance
Export / Import Measurements
20
A. Open Import/Export dialogue:
Measurements > Import/Export Measurements ... B. Open/Create archive: Open existing Archive file, or Create new one by clicking New button. Key in relevant file name for archive and click Save button. i For easy location save the file in the root of
the CoCoS EDS directory.
C. Export/Import measurements: Export single or all measurements from EDS (left-field) to Archive (right-field) by clicking buttons opposite Import single or all measurements from archive to EDS to Archive by clicking ... D. Click OK button to finish.
CoCoS-EDS Quick Reference
16 (of 20)
Continued >
MAN Diesel 21
Operating values shown in standard report
User Access levels/password (Chief & Crew level) Check limits (alarm limits), Display limits Actual and nominal values (from model curves) EDS filtering On-line and off-line modes of EDS Transfer on-line to off-line data (i.e. store measurements)
2.
Views Engine Overview, Standard Report, Line Recorder Characteristic Maps (Model Curves / Nominal Values) Bar Charts, Load Diagram, Performance Curves and Tables Display groups, attributes, customising groups
3.
Trend operation Short trend, Long trend Diagnostic trend & Manual trends (measurements)
4.
Measurements Line recorder zoom, filtered and non filtered values Updating measurements with local readings and PMI data Storing and loading measurements Printing measurements Exporting to file, exporting to Excel
