Scribd
Upload
2K views

Hyundai Supplemental Restraint System Control Module Programming Procedure (Acu Variant Coding)

This technical service bulletin provides procedures for programming the supplemental restraint system control module (SRSCM) on Genesis Coupe vehicles when it has been replaced. There are two procedures depending on whether the Global Diagnostic System (GDS) is connected to the internet or not. The procedure involves entering vehicle information like the VIN into the GDS and performing an "ACU variant coding" process to program the SRSCM before returning the vehicle to the customer. Technicians must also ensure the latest GDS software update is installed to support this programming function.

Uploaded by

Anonymous OFfJVrQY6
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
2K views

Hyundai Supplemental Restraint System Control Module Programming Procedure (Acu Variant Coding)

This technical service bulletin provides procedures for programming the supplemental restraint system control module (SRSCM) on Genesis Coupe vehicles when it has been replaced. There are two procedures depending on whether the Global Diagnostic System (GDS) is connected to the internet or not. The procedure involves entering vehicle information like the VIN into the GDS and performing an "ACU variant coding" process to program the SRSCM before returning the vehicle to the customer. Technicians must also ensure the latest GDS software update is installed to support this programming function.

Uploaded by

Anonymous OFfJVrQY6
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 13

Technical Service

Bulletin

Group

RESTRAINTS
Number

09-RT-001
Subject

SUPPLEMENTAL RESTRAINT SYSTEM CONTROL


MODULE PROGRAMMING PROCEDURE (ACU
VARIANT CODING)

Date

SEPTEMBER, 2009
Model

GENESIS COUPE (BK)

CIRCULATE TO:
[X] SERVICE ADVISOR

[ ] GENERAL MANAGER [X] PARTS MANAGER


[X] SERVICE MANAGER [X] WARRANTY MGR

[X] TECHNICIAN
[ ] SALES MANAGER

This bulletin supersedes TSB 09-BE-018. In this bulletin, there is a TSB group
change from Body Electrical System (BE) to Restraints System (RT).
DESCRIPTION:
If the Supplemental Restraint System Control Module (SRSCM) in the Genesis Coupe
is replaced during service or accident repair, the unit must be programmed using the
Hyundai Global Diagnostic System (GDS) before the vehicle is released to the
customer. This bulletin outlines the procedures required to program the SRSCM using
the GDS. Two procedures are provided:
Pages 2 - 5 describe the programming procedure to use when the GDS is
connected to the Internet.
Pages 6 - 11 describe the programming procedure to use when the GDS is not
connected to the Internet (Manual Coding). It will be necessary to access the
hmaservice.com web site to retrieve the 4 digit ACU Coding code for this
procedure.

APPLICABLE VEHICLES:
Model: All Genesis Coupe (BK)

NOTE: The GDS menus refer to the SRSCM programming process as ACU
Variant Coding, where ACU is an acronym for Airbag Control Unit.
SRSCM and ACU both refer to the Supplemental Restraint System
Control Module.
NOTE: GDS Update Version 1.601 must be installed prior to performing the
programming procedure. Previous versions do not support ACU Variant
Coding.

Page 1 of 13

NOTE: The Passenger Air Bag Off


indicator lamp connector must be
connected prior to performing the
programming procedure; the
procedure cannot be performed if
the indicator lamp is
disconnected.

SERVICE PROCEDURE:
SRSCM/ACU Programming Procedure when GDS is connected to the Internet:
1. Connect the GDS unit to the vehicle, select the vehicle model and then select the
AIRBAG icon.

Page 2 of 13

Technical Service
Bulletin

Group

RESTRAINTS
Number

09-RT-001

2. Select OK.

3. Select System Option.

Page 3 of 13

4. Select ACU Variant Coding.

5. Verify the ignition key is in the on position and Select OK.

Page 4 of 13

Technical Service
Bulletin

Group

RESTRAINTS
Number

09-RT-001

6. Enter the vehicles 17 digit VIN number and select OK.

7. The following the screen will be displayed: Select OK

Page 5 of 13

8. When the variant coding process is complete, the following screen will be displayed
Select OK. The coding procedure is now complete.

SRSCM/ACU Programming Procedure when GDS is not connected to internet:


1. To identify the variant coding code for the vehicle, go to the hmaservice.com
website and choose Vehicle Info.

Page 6 of 13

Technical Service
Bulletin

Group

RESTRAINTS
Number

09-RT-001

2. Enter the vehicles 17 digit VIN and select OK.

3. Select ACU coding code to retrieve the code.

Page 7 of 13

4. Connect the GDS unit to the vehicle, select the vehicle model and then select the
AIRBAG icon.

5. Select OK.

Page 8 of 13

Technical Service
Bulletin

Group

RESTRAINTS
Number

09-RT-001

6. Select System Option.

7. Select ACU Variant Coding

Page 9 of 13

8. Verify the ignition key is in the ON position and select OK.

9. Verify the ignition key is in the ON position and select OK.

Page 10 of 13

Technical Service
Bulletin

Group

RESTRAINTS
Number

09-RT-001

10. Select OK.

11. Enter the 4 digit code retrieved from hmaservice.com in step 3 (page 7).

Page 11 of 13

12. Select OK.

13. The following screen will be displayed select OK.

Page 12 of 13

Technical Service
Bulletin

Group

RESTRAINTS
Number

09-RT-001

14. When the variant coding process is complete, the following screen will be displayed
select OK. The coding procedure is now complete.

Normal warranty applies.

Page 13 of 13

You might also like