Cementing: BJ Services Comp BJ Services Comp BJ Services Comp BJ Services Comp BJ Services Company ANY ANY ANY ANY

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

CEMENTING

Product Information

PRODUCTS

AND

SERVICES

R-3
Applications

R-3 is a finely-ground lignosulfonate powder used as a low-to moderate-temperature retarder, R-3 is functional in
a wide range of formulations to extend the slurry thickening time at temperatures up to 240F (115C) BHCT. R-3
provides dispersing properties during mixing and good strength development.

Features
Predictable Thickening T
imes
Times
Provides predictable thickening times with small concentration changes.
Compressive Strength Development
Allows early strength development in most slurry designs at BHST.
iscosity
Low Mixing V
Viscosity
Disperses the slurry, providing lower mixing viscosities.

Benefits
Compatible with all API cements and most BJ cement additives. Its specific gravity is 1.36.
Normally requires small concentrations for desired results (0.1 % to 1.0%).
Very economical compared to other cement retarders.
Normally dry-blended but may be easily dispersed in the mixing water.

Safety Precautions
Use normal personal protective equipment when working with R-3.

Limitations
R-3 can not be used to retard A-2 or Sodium Metasilicate extended (lightweight) slurries.

Competitive Products
HR-5/HR-6 and D-13.

BJ SERVICES COMP
ANY
COMPANY

R-3
Product Information

Technical Data

Temperature, BHST F (C)

(104)
220
(93)
200
(82)
180
(71)
160
(60)
140
(49)
120
1,200
(8.27)

2,000
(13.78)

2,800
(19.30)

3,600
(24.81)

4,400
(30.32)

24-Hr Compressive Strength, psi (MPa)

0.1% R-3

0.2% R-3

0.3% R-3

0.4% R-3

Temperature, BHCT F (C)

(93)
200
(82)
180
(71)
160
(60)
140
(49)
120
(38)
100
1

Thickening Time, Hours

0.0% R-3

0.1% R-3

0.2% R-3

0.3% R-3

0.4% R-3

References
Confidential Mixing Manual
MSDS

The above features and/or data are supplied solely for informational purposes and BJ Services Company makes no guarantees or warranties, either expressed or implied, with respect to their accuracy or use. All product warranties and
guarantees shall be governed by the BJ Services Company standard at the time of sale or delivery of service. Actual product performance or availability depends on the timing and location of the job, the type of job and the particular
characteristics of each job. This document is controlled by the reference date. To ensure that this is the current version, please reference the Services section of the BJ Services Website (www.bjservices.com) or ask your BJ representative.

10/13/00

BJ SERVICES COMP
ANY
COMPANY

You might also like