Estidama - Natural Systems Assessment
Estidama - Natural Systems Assessment
Estidama - Natural Systems Assessment
Intent
Credit
Requirements
To ensure that at the commencement of the design process, the environmental baseline
conditions surrounding, connected to and on the site are considered and assessed.
GENERAL
Demonstrate that, before the start of the design process and site clearance, an
assessment of the Natural Systems has been carried out at the:
project site;
area of probable impact surrounding the project site;
sub-regional; and
regional scale.
Identify opportunities, constraints and carrying capacity associated with the
development, and present in a Natural Systems Assessment Report.
Key performance indicators (KPIs) must be prepared to guide the design of the
development, based on the results of the opportunities and constraints analysis. KPIs
must be measurable targets against which future design or construction works can be
assessed.
The assessment must be carried out by a suitably qualified environmental professional
trained to complete such analysis and assessment.
ADDITIONAL REQUIREMENT/CLARIFICATIONS
None
Requirement
Achievement
Credit
Submission:
Design Rating
Narrative;
Maps; and
Site photographs.
Maps and site photographs must clearly identify the extent of different habitats and/or
other significant natural system features.
Review of the site against Environmental Policy Statements included in Plan 2030;
and
Credit
Submission:
Construction
Rating
Calculations and
Methodology
Information contained in the following documents may provide the foundation for this
credit:
Preliminary Environmental Review (PER) or Environmental Impact Assessment (EIA)
as may be required by the EAD;
The contextual natural systems analysis as a part of the Abu Dhabi Urban Planning
Councils (UPC) Development Review Process; and
An Environmental Context Statement as required by the UPC Coastal Development
Guidelines.
The Natural Systems Assessment Report must cover the following environmental
Pearl Building Rating System: Design & Construction, Version 1.0, April 2010
32 of 223
components, as a minimum:
Topography;
Geology/ geomorphology;
Soils and geotechnical attributes;
Hydrology and groundwater;
Waste and contamination;
Coastal conditions;
Microclimate (such as prevailing winds, solar orientation and solar shading;
Priority species, habitats and ecosystems (both onsite and those influenced by the
site);
Flora and fauna (including wildlife corridors, seasonal uses); and
Archaeological features.
The Natural Systems Assessment must be undertaken in combination with LBo-R2 Urban
Systems Assessment.
The assessment must be based on a field survey and a desk top study using historical
and/or other data. As a minimum, a field survey must be carried out on the project site
and include a Phase I Habitat Survey, or similar. A desk top study is sufficient for the
area of probable impact, sub-regional and regional analysis.
The Natural Systems assessment must illustrate the inter-relationship between
environmental components and identify the carrying capacity of the site based on the
following:
Pearl Building Rating System: Design & Construction, Version 1.0, April 2010
33 of 223
connections; and
areas subject to environmental constraints, including high groundwater, flooding,
steep slopes, etc.
KPIs must be prepared to guide the design of the development, based on the results of
the opportunities and constraints analysis. They must include indicators and targets
relating to the following, as a minimum:
Soil;
Flora;
Fauna;
Microclimate;
Topography and views;
Drainage;
Other targets relating to mitigation of identified environmental constraints; and
Area of site to be protected, maintained, created or restored.
KPIs must be simple, clear, measurable targets against which future design or
construction works can be assessed. They also need to be site specific and reflect the
particular attributes of a site.
Project site area The physical area within which activities of the proposed project will
take place (boundary of project area is defined by titled property boundary).
Area of Probable Impact The extent of a physical area occupied by an environmental
component that is likely to be impacted by at least one of the phases of the proposed
project. The boundary of the area of probable impact is determined by measurements,
previous studies, models or best professional judgment and may vary by environmental
component. In simple terms the extent of the area outside of the project area that is
likely to be directly or indirectly impacted by the proposed project
A suitably qualified environmental professional is an individual with:
a degree in a relevant subject,
a minimum of five years relevant work experience (For the ecological component of
the assessment, where significant and valuable assets are present, this is to include
experience of carrying out habitat surveys as well as providing advice on ecological
protection, enhancement and mitigation measures),
a proven track record on working on similar projects in the region.
The Environment Agency Abu Dhabi (www.ead.ae) holds a list of consultants carrying
out a range of environmental services within the Emirate of Abu Dhabi.
References
Abu Dhabi Urban Planning Council (for Development Review and Design Process,
and Coastal Development Guidelines), www.upc.gov.ae
Environment Agency Abu Dhabi (for Environmental Impact Assessment (EIA) and
Preliminary Environmental Review (PER) guidelines), www.ead.ae
Union for Conservation of Nature, IUCN, www.iucn.org
Pearl Building Rating System: Design & Construction, Version 1.0, April 2010
34 of 223
2005
Terrestrial Environment of Abu Dhabi Emirate, Environment Agency Abu Dhabi,
2008, www.ead.ae
Handbook for Phase 1 Habitat Survey a technique for environmental audit, JNCC,
2007, www.jncc.gov.uk
Vascular Plants of Abu Dhabi Emirate, Gary Brown and Sabitha Sakkir, August 2004
Pearl Building Rating System: Design & Construction, Version 1.0, April 2010
35 of 223
Credit
Requirements
To protect significant and valuable Natural Systems assets identified in NS-R1 Natural
Systems Assessment.
GENERAL
Demonstrate that significant or valuable Natural Systems assets, as identified in NS-R1
Natural Systems Assessment, are adequately protected or that the impacts are either
mitigated or compensated.
This credit contains three types of strategies. Proponents shall demonstrate one of the
three:
Strategy 1 - Protection
Strategy 2 - Onsite Mitigation
Strategy 3 - Offsite Compensation
Where significant and valuable assets are present, the Natural Systems Protection,
Mitigation or Compensation plan and supporting studies must be prepared by a suitably
qualified ecological professional.
ADDITIONAL REQUIREMENT/CLARIFICATIONS
Strategy 1 Protection:
Demonstrate that 100% of a significant asset identified in NS-R1 is retained and
protected from damage and destruction sufficient to maintain its existing structure
and function (including any reclamation and dredging works at the project site or
sources location of dredged materials);
Demonstrate that 80% of a valuable asset identified in NS-R1 is retained and
protected from damage and destruction sufficient to maintain its existing structure
and function; and
Demonstrate that a maximum of 25% of the projects total land area consist of
reclaimed land.
or
Demonstrate that no significant or valuable assets for protection were identified in
NS-R1.
Strategy 2 - Onsite Mitigation:
Applies to sites where on-site mitigation is required, due to the impracticality of
protection (as determined through consultation with the UPC).
This strategy cannot be applied if the Natural Systems asset to be impacted is located
within a protected or proposed protected area or national park, a coastal park or
ecological hotspot, or a coastal conservation zone, as defined by the UPC Coastal
Development Guidelines.
Pearl Building Rating System: Design & Construction, Version 1.0, April 2010
36 of 223
Requirement
Achievement
Credit
Submission:
Design Rating
Protection Strategy Report which identifies the potential risks to the Natural
Systems assets from development and inform setback requirements, including:
limits of development, buffer areas and setbacks (Works areas must be clearly
identified on an aerial photograph of existing conditions); and
any features of ecological value to be lost.
Strategy 2:
Mitigation Strategy Report which details the reasons for requiring mitigation for
loss of habitat and includes:
narrative and maps of the area of natural system assets to remain protected;
limits of development, buffer areas and setbacks (Works areas must be clearly
Pearl Building Rating System: Design & Construction, Version 1.0, April 2010
37 of 223
Credit
Submission:
Construction
Rating
Calculations and
Methodology
Compensation Strategy Report which details the reasons for requiring compensation
for loss of habitat and includes:
narrative and maps of the area of natural system asset to remain protected;
limits of development, buffer areas and setbacks (Works areas must be clearly
identified on an aerial photograph of existing conditions);
Updated development map delineating the built limits of all proposed development
and disturbance, setback zones, and buffer areas;
Supporting calculations summarizing final total land area and protected areas; and
Only species within the project site boundary need to be protected, not those within
the Area of Probable Impact (as defined in NS-1 Natural Systems Assessment).
For mitigation or compensation, calculate the original area of the ecological habitat to
be re-established. Re-establish the habitat on two times the surface area of the original
habitat area. The mitigation or compensation area must have a similar hydrological
function and soil type as the original area.
Setback requirements must be determined by a suitably qualified ecologist depending
on the nature of the asset (in consultation with UPC). In the absence of any policy for a
specific habitat type, or clear justification for setback, the proposed development must
be:
Setback at least 100 meters from identified coastal and marine priority habitats
(intertidal, coral, seagrass);
Setback at least 50 meters from mangrove and vegetated sandy beaches;
Setback at least 10 meters from wadis, sand-sheets and low dunes, interdunal
plains and high dunes, alluvial plain and jebels;
Setback from protected trees through use of barriers located either at the outer
edge of branch spread or half the height of the tree, whichever is the greater; or
Setback from other habitat areas through use of barriers located minimum 1 meters
from the outer edge.
References
Pearl Building Rating System: Design & Construction, Version 1.0, April 2010
38 of 223
Credit
Requirements
To minimize demand for resources, promote soil protection and enhancement and
ensure the long term survival and management of landscaped/habitat areas.
GENERAL
Demonstrate that a Natural Systems Design and Management Strategy has been
prepared that ensure the long term survival and management of the landscape and
habitat areas within the site and promotes:
soil protection and enhancement;
low maintenance requirements; and
low demand for resources.
The Natural Systems Design and Management Strategy must cover all landscape areas
including the management of:
protected, mitigated or compensated assets (as identified under NS-R2);
areas of ecological enhancement (as identified under NS-3); and
habitat creation and restoration areas (as identified under NS-4).
The Natural System Design and Management Strategy must be prepared by a suitably
qualified professional.
ADDITIONAL REQUIREMENT/CLARIFICATIONS
Sites that demonstrate no existing or proposed landscaping comply with the
requirements.
Requirement
Achievement
Credit
Submission:
Design Rating
Credit
Submission:
Construction
Rating
Plans and drawings illustrating layout and design of landscaped and habitat
areas;
Details and justification of plant selection (ensuring that only native and
adaptive drought and saline tolerant species are specified for habitat areas);
Irrigation strategy;
Pearl Building Rating System: Design & Construction, Version 1.0, April 2010
39 of 223
Calculations and
Methodology
The Natural Systems Design and Management Strategy must include the following, as a
minimum:
A landscape design influenced by the assessment undertaken at NS-R1;
A strategy for protection of site soils from compaction, erosion, pollution and
increases in salinity;
A strategy for soil testing to determine nutrient level, salinity and a strategy for
soil enhancement including increasing water retention capacity, salinity
management and nutrient management including promotion of low fertilizer
requirements;
Details of plant palette for landscape and/or habitat areas and sources of plant
stock or seeds;
Planting design which groups together species with similar soil and microclimatic
requirements and water demands;
An irrigation strategy which promotes low water demand through species selection
and efficient irrigation networks;
Avoidance of pesticide and herbicide application; if required, identify potential
impacts and outline strategy to be adopted to minimize environmental impact;
Identification of the landscape and/or habitat areas that require specific
monitoring and maintenance (as identified by NS-R1 and NS-R2) and outline a
strategy for their establishment, survival, generation and protection, identifying
the establishment and maintenance periods and a performance criteria for
establishment;
Identify maintenance duties required to be carried out in the various landscaped
areas considering species type, soil type, irrigation requirements and season;
Identify monitoring requirements for the landscape / habitat areas and species for
annual monitoring of health, species diversity and abundance and soil condition;
and
Identify monitoring and maintenance organization.
References
Pearl Building Rating System: Design & Construction, Version 1.0, April 2010
40 of 223