Sp9 Install Explain

Frist ,check updata:

http://code.google.com/p/slax-u8500-rom/downloads/list
<><><> Sp9Changlog<><><>
1 Fix Headset volume too low problem.
2 Fix SP8's Wifi problem.
3 Fix SDcard's mount problem.
4 swap is auto-open in /swap/swap.img, if you want to stop it, make a new file name noinswap in /system or has a swap
partition in third.
5 headset make/rec a call:
A:boot or reboot your phone,the first time you make/rec a call will work good.
B:after first time make/rec your call,other times you should pressed two times the "mute" button on call-screenfirst
press will be mute your mic,sec press will makes your phone call work good
C:if you unplug headset during calling, the sound will in your ear-speak(?),replug your headset,your headset can't
work.
6 Add home & back button in notifybaryou can change settings in Settings->CyanogenMod Settings->Tablet tweaks.
7 make touch more smooth
8 Add a 692 overclock kernel
9 Add Languages
The following changes in the blue word is Sp9's change.
BugFMcmSettings->Lockscreen->Lockscreen gestures can't workhpasd+can't work someone tells me how to solve
this problem?
<><><> Sp8Changlog<><><>
1Fix Sp7 's Can't-Boot problem.
2The following changes in the green word is Sp8's change.
<><><> Sp7Changlog<><><>
1Short Boot Time
2Settings->About->Batty usage Provider More informations.if your phone use bautty too fast,look here to find
out witch applicant waste it
3(provider 600 633 672 710 Four choose ,and code became more stablysp6's cpu overclock is only up the
frequencyvoltage, and other such messy are not changedso performance is not obvioussp7 's voltage and board are
all fine, can only support up to 710.Will be unstable if higher than 710 , Even I can not boot my phone. Set
710+performance in No-frills CPU Control is so cool, angry birds already running very smooth.
4Fix Speaker OverLoudly.sp9 fix headset volume too low
5Internal SwapScript is in boot.img's /superboot/superboot.shswap file 's /swap/swap.img42m,swapniess is
60%(90mopen Automatic)
6Temporarily shield the wireless hotspots, not to achieve this function.
7CM settings update.
8Repair problems that Unlock Slider was too under
9Language Options to delete a lot of languages, mainly to retain English, Spanish, French, Korean, Japanese,
Chinese Simplified / Traditional.(ADD )
10Reset memory clean up strategy .
11Add a complete Livewallpaper (because there is no 3d accelerator,LiveWallpaper's transparent effects will not
appear)
12(Fixed)(seem better a little but still unstable,sometimes need static ip adr. Set it in Wireless&network
->WiFiSettings->press menu->advanced->Use static IP,different network enveronment maybe need different
Ip&Gateway,NetMaskwifi is very unstable,within a second will automatically reconnect, connection will be stabilized
after a while. However, you can automatically connect without prior versions as to connect by off and on.
13CM 's Chinese fonts become more sleek.
14If you add google account authentication fails in Gtalk tips, open Settings -> Applications -> All -> Google
Services Framework -> clear data, if not take effect, open the Settings -> account and sync, turn off the background data.
15Sd card via usb mountfix did not respond (need to replug the usb) problem.
16Optimize memory usage, just brushing machine available memory in the 80m or so, install the software can keep
a dozen in the 40-70.
17Adjust power policy framework which was originally estimated to reduce electricity use, and now because of

overclocking, increase the cpu and motherboard voltage, high frequency power may be of use would be more fast, it is
recommended to set the cpu enough to use 300/400+ondmand , if play the game then adjusted to 710 + performance.
18Repair sp6 touch-button problem.
19(updated)(And previous versions of the same, rec can take calls, but not half-way replugHeadset to call
because I forgot to bring headphones home, and no test
20Note that if your phone is without battery (but with usb to provider power), can not make calls and receive calls.
Because the logic is not the battery -> battery capacity is 0 -> enter a minimum to maintain the boot mode -> auto shut
down the radio.
21(Updated for Sp9Released a complete compilation CM7 development package (include cm7 % kernel
config),Somene with linux development experience can try it.
1: preparation,
1, install the driver.
if you have drive or can flash my prevous versions roms, skip this step.
First check whether your phone adb driver installed, check the method is, the phone shutdown(not connected
usb) into fastBoot mode (hold button + power button + volume small) (shot in white Huawei interface), then in your
PC: Right click My computer, the Device Manager to see if drivers are not adb this driver! If you do not
manually update, or update the wizard with the drivers! ,

2, extract the downloaded installation package to any location.

2, the choice of work

Choose what?
1: Bootimg choice, should be able to find boot-600 boot-633 boot-672 boot-692(new) boot-710 four img file.
These four files corresponding to 600mhz 633mhz 672mhz 692mhz(new) 710mhz overclock frequency is Generally
recommended to install 633 or 672, (if you want to switch later, can be individually painted this boot.img, will not change
your phone system and software sd card, brush method behind that 600 is the most conservative, 710 some one appear can
not start, run and unstable situation, and some one were running very smoothly, so caution)
2: Swap the choice of
swap is a cache, you can expand your phone memory to run as the method.
SP8 provides two ways to use Swap, one is built inside the phone, one is installed in the SD card.
A, installed in the house, size of 90m, the phone /swap/swap.img file, the advantage of speed, sd does not shorten life,
not laborious and time-consuming installation, the disadvantage is a bit small.
B, installed in the SD card, the size of your designation, the advantage of the capacity is large enough, the
disadvantage is to shorten the life of sd card, slow, also need to partition your SDcard.
A is recommended method, but also open the way for the default (if your SD card is not a swap partition in the third
partition, will be automatically enabled).
Open method B, where the opening in the following Data2SD mentioned.
Disable the internal swap method: (new)
sp8: Use the third partition is the swap partition
sp9: The third partition is the swap partition + If /system there are files called noinswap
, And then restart, it will automatically disable the built-in swap, and sp9 the cache will be changed from the original
space of 20m back 90m.

If you can not understand, it does not matter, choose A and then skipped.
3: Data2SD function selection,
SP9 delete DATA2sd support.Of cause the official app2sd in 2.3.5 is support always.
You can add it by yourself.
I believe you have encountered the phone memory is full, the application installation can not be the case, u8500
provides only 140m of userdata storage space, can hold a limited application.
If you install the applicantion not too many, please ignore this feature , because it had to increase power consumption,
the operation of the SD card there are taking risks, SD card was slower than userdata-storage and so on, the 2.3.5 mobile
system app2sd is also to a certain extent, solve this problem.
Very small part of Users say their the SD card is not compatible with this Data2sd Operating SD may lead to loss of
data, zoning change, and so the consequences.
Turn this feature you need to partition the card operation.
If you can not understand, choose not to open, then the next step.

Third, the actual operation:

1, Flash System, to enter bootloader mode (unplug the usb and turned off, press and hold "hang up
button + volume down + power button," into bootloader mode) (Phone will stuck in white screen), then
confirm " 1: preparation, "well done,,,,,run "FlashSystem. bat"
2, Flash Bootimg, right chick, edit, open the "FlashBootimg. Bat", the inside of the boot-672
into the kernel of your choice,save. Then run "FlashBootimg. Bat".
3, if you intend to use the built-in-swap and do not use data2sd function, then run the
"FlashModeReboot.bat", restart the phone, and enjoy the new rom.
4, (optional step is to re-election overclocking bootimg)
Bootloader mode, then modify the boot-XXX inside the FlashBootimg.Bat, save.
Run the bat, then run the "FlashModeReboot.bat"
5, (optional step, the function is not required)
Swap and Data2sd on the SD card method (may cause an unsuccessful Boot results, SD cards and
other consequences of data corruption, pay attention to selection)
Steps:
1> backup of your SD card data. Back up your All improtant system data to your conputer..
2> unplug the usb and turned off, press and hold "hang up button + volume down + power
button" and enter bootloader mode (stuck in the White Huawei interface), click Run
"FlashRecovery.bat", after brushing in the , hold down the "dial button + volume increases, click Run,"
FlashModeReboot.bat ", restart the phone, hand still holding down the keys until the white screen
became dark, Releasing the hand, if you go to a green on a black at the end of the character screen,
indicating the success of your flash into the Recovery mode, this mode can provide backup and restore
functions, you can find their own way, I will not say more.
3> we have to use the Rec to provide partitioning, to find "Partition sdcard", touch up and
down the control key and press is to determine the volumedown key is returned. Pulled the bottom,
select the "Partition SD", first it will ask you to Ext partition size, the size of your installed software,
the size of that space, so they need bigger, the general recommendation 512m, followed by the Swap
partition, if Swap your choice in the above selected is A, then choose 0, if you choose B, then select the
64m to 256m range, pay attention! ! ! If you press once, it will begin the actual partition your SD card
data will be deleted.
4> reboot the system, reboot back to your phone to the the desktop.
5> push the "data2sdv3.zip" through the usb mount, etc., into the root of your sd card. Then
restart the phone, this time you can restart the menu, select Restart to Recovery, then shut down before

you can use special keys to enter the method.

6> choose a item just like:"Install zip XXXXX"(I forgot it ,D_D) -> If successful, you should
be able to find previous pushed data2sdv3.zip, click on it, then install, after installation, restart the
phone.
7> If you phone in 5 minutes to boot to the desktop, then congratulations, you should have
opened the Data2sd feature , detection method is Settings -> Applications -> Management Application
-> Downloaded -> See bottom of available space(just like 10m used 500m free).
If you can not start within five minutes, but has been stuck in a boot screen, then do not
Disappointed, Data2sd is not a particularly useful function, unplug the usb and battery to restart the
recovery, then re-partition, swap, and ext are set to 0, and then re-Flash system back to normal.

slaxin Canton China 20110822