Virtual MIDI Piano Keyboard

VMPK is a MIDI events generator and receiver

Introduction
Getting started
MIDI concepts
Keyboard maps and instrument definitions
MIDI connections and virtual MIDI cables
FAQ
Download
Installation
Requirements
Notes for windows users
Notes for Mac OSX users
Notes for packagers and advanced users
Acknowledgements

VMPK 0.3.0

Introduction
Virtual MIDI Piano Keyboard is a MIDI events generator and receiver. It doesn't produce

any sound by itself, but can be used to drive a MIDI synthesizer (either hardware or
software, internal or external). You can use the computer's keyboard to play MIDI notes,
and also the mouse. You can use the Virtual MIDI Piano Keyboard to display the played
MIDI notes from another instrument or MIDI file player. To do so, connect the other
MIDI port to the input port of VMPK.

Gymnopdie No. 1 by E. Satie (18661925) played by MuseScore and VMPK in Linux

VMPK has been tested in Linux, Windows and Mac OSX, but maybe you can build it also
in other systems. If so, please drop a mail to the author.
The Virtual Keyboard by Takashi Iway (vkeybd) has been the inspiration for this one. It
is a wonderful piece of software and has served us well for many years. Thanks!
VMPK uses a modern GUI framework: Qt5, that gives excellent features and
performance. Drumstick RT provides MIDI input/output features. Both frameworks are
free and platform independent, available for Linux, Windows and Mac OSX.
The alphanumeric keyboard mapping can be configured from inside the program using
the GUI interface, and the settings are stored in XML files. Some maps for Spanish,
German and French keyboard layouts are provided, translated from the ones provided
by VKeybd.
VMPK can send program changes and controllers to a MIDI synth. The definitions for
different standards and devices can be provided as .INS files, the same format used by
QTractor and TSE3. It was developed by Cakewalk and used also in Sonar.

This software is still in development. See the TODO file for a list of pending features.
Please feel free to contact the author to ask questions, report bugs, and propose new
features. You can use the tracking system at SourceForge project site.
Copyright (C) 2008-2015, Pedro Lopez-Cabanillas <plcl AT users.sourceforge.net> and
others.
Virtual MIDI Piano Keyboard is free software licensed under the terms of the GPL v3
license.

Screenshots gallery

Getting started
MIDI concepts
MIDI is an industry standard to connect musical instruments. It is based on transmitting
the actions performed by a musician playing some instrument to another different
instrument. Musical instruments enabled with MIDI interfaces typically have two DIN
sockets labeled MIDI IN and MIDI OUT. Sometimes there is a third socket labeled MIDI
THRU. To connect a MIDI instrument to another one, you need a MIDI cable attached to
the MIDI OUT socket of the sending instrument, and to the MIDI IN of the receiving one.
You can find more information and tutorials like this one all around the Net.
There are also hardware MIDI interfaces for computers, providing MIDI IN and OUT
ports, where you can attach MIDI cables to communicate the computer with external
MIDI instruments. Without needing hardware interfaces, the computer can also use
MIDI software. An example is VMPK, which provides MIDI IN and OUT ports. You can
attach virtual MIDI cables to the VMPK's ports, to connect the program to other
programs or to the computer's physical MIDI interface ports. More details about this
coming later. You usually want to connect the MIDI output from VMPK to the input of
some synthesizer which transforms MIDI into sound. Another common destination for
the connection would be a MIDI monitor that translates MIDI events into readable text.

This will help you to understand what kind of information is transmitted using the MIDI
protocol. In Linux you can try KMidimon and in Windows MIDIOX.
VMPK doesn't produce any sound. You need a MIDI software synthesizer to hear the
played notes. I recommend you to try QSynth, a graphical front-end to Fluidsynth. In
Windows you can also use the "Microsoft GS Wavetable Synth" that comes with all
Windows versions, or a better alternative like CoolSoft Virtual MIDI Synth. Of course, an
external MIDI hardware synth would be an even better approach.

Keyboard maps and instrument definitions

VMPK can help you to change sounds in your MIDI synthesizer, but only if you provide a
definition for the synthesizer sounds first. The definitions are text files with the .INS
extension, and the same format used by Qtractor (Linux), and Sonar (Windows).
When you start VMPK the first time, you should open the Preferences dialog and choose
a definition file, and then select the instrument name among those provided by the
definitions file. There should be one instrument definitions file installed in the VMPK's
data directory (typically "/usr/share/vmpk" in Linux, and "C:\Program Files\VMPK" in
Windows) named "gmgsxg.ins", containing definitions for the General MIDI, Roland GS
and Yamaha XG standards. It is a very simple format, and you can use any text editor to
look, change, and create a new one. You can find a library of instruments definitions at
the cakewalk ftp server.
Since the release 0.2.5 you can also import Sound Font files (in .SF2 or DLS formats) as
instruments definitions, using a dialog available at menu File->Import SoundFont.
Another customization that you may want to tweak is the keyboard mapping. The
default layout maps about two and half octaves for the QWERTY alphanumeric
keyboard, but there are some more definitions in the data directory, adapted for other
international layouts. You can even define your own mapping using a dialog box
available in the Edit->Keyboard map menu. There are also options to load and save the
maps as XML files. The last loaded map will be remembered the next time you start
VMPK. In fact, all your preferences, selected MIDI bank and program, and the controller
values will be saved on exit, and restored when you restart VMPK the next time.

MIDI connections and virtual MIDI cables

In Windows, VMPK connects automatically to the default MIDI output, which is usually
the "Microsoft GS Wavetable Synth", included in all Windows versions. This MIDI
synthesizer produces very poor quality sound, and suffers of high latency. A better (and
free) alternative is CoolSoft Virtual MIDI Synth.

To connect hardware MIDI devices you need physical MIDI cables. To connect MIDI
software you need virtual cables. In Windows you can use some virtual MIDI cable
software, like MIDI Yoke, Maple, LoopBe1, Sony Virtual MIDI Router or loopMIDI.
MIDI Yoke setup process will install the driver and a control panel applet to change the
number of MIDI ports that will be available (you need to restart the computer after
changing this setting). MIDI Yoke works sending every MIDI event written to an OUT
port to the corresponding IN port. For instance, VMPK can connect the output to the port
1, and another program like QSynth can read the same events from the port 1.
Using MIDIOX you can add more routes between MIDI Yoke ports and other system MIDI
ports. This program also provides other interesting functionalities, like a MIDI file
player. You can listen the songs played in a MIDI Synth and at the same time see the
played notes (only one channel at a time) in VMPK. To do so, you can use the "Routes"
window in MIDIOX to connect the input port 1 to the Windows Synth port. Also,
configure the player's MIDI port to send to MIDI Yoke 1. And configure VMPK Input port
to read from MIDI Yoke 1. The player will send the events to the out port 1, which will be
routed to both the input port 1 and at the same time to the synth port.
In Linux, you have ALSA sequencer to provide the virtual cables. The ports are
dynamically created when you start a program, so there is not a fixed number of them
like in MIDI Yoke. The command line utility "aconnect" allows to connect and disconnect
the virtual MIDI cables between any ports, being hardware interfaces or applications. A
nice GUI utility for doing the same is QJackCtl. The main purpose of this program is to
control the Jack daemon (start, stop and monitor the state). Jack provides virtual audio
cables to connect your sound card ports and audio programs, in a similar way to the
MIDI virtual cables, but for digital audio data.

QJackCtl connections in Linux

Frequently Asked Questions

How to display 88 keys?
Since VMPK 0.6.0 you can use the settings dialog to choose this exact number of keys.

There is no sound
VMPK doesn't produce any sound by itself. You need a MIDI synthesizer, and please read
the documentation again.

Some keys are silent

When you select channel 10 on a standard MIDI synth, it plays percussion sounds
assigned to many keys but not to all of them. On melodic channels (not channel 10) you
can select patches with a limited range of notes. This is known in music as Tessitura.

Patch names don't match the real sounds

You need to provide an .INS file describing exactly your synthesizer's sound set or
soundfont. The included file (gmgsxg.ins) contains definitions for only standard GM, GS
and XG instruments. If your MIDI synth doesn't match exactly any of them, you need to
get another .INS file, or create it yourself.

Syntax of the Instrument Definition (.INS) files?

One explanation of the INS format is here.

Can I convert my Instrument Definition for vkeybd into an .INS file?

Sure. Use the AWK script "txt2ins.awk". You can even use the utility sftovkb from vkeybd
to create an .INS file from any SF2 soundfont, but there is also a function to import the
instrument names from SF2 and DLS files in VMPK.
$ sftovkb SF2NAME.sf2 | sort -n -k1,1 -k2,2 > SF2NAME.txt
$ awk -f txt2ins.awk SF2NAME.txt > SF2NAME.ins

You can find the AWK script "txt2ins.awk" installed in the VMPK's data directory.

Download
You can find the latest sources, Windows, and Mac OSX packages at SourceForge project
site.

VMPK for Android (free)

Windows 32bit: vmpk-0.6.2-win32-setup.exe (34.8 MB)

Mac OS X Intel 64bit: vmpk-0.6.2-mac-x64.dmg (45.3
MB)
C++ Sources: vmpk-0.6.2a.tar.bz2 (466.2 kB)
Linux i686 (32 bit): vmpk-0.6.2-linux-32bit-installer.run
(47.7 MB)
Linux (64 bit): vmpk-0.6.2-linux-64bit-installer.run (48.3
MB)
If you distribute VMPK packages for any distro, please drop me an email and I will add a
link to your site here.

Installation from sources

Download the sources from http://sourceforge.net/projects/vmpk/files. Unpack the

sources in your home directory, and change to the unpacked dir.

$ cd vmpk-x.y.z

You can choose between CMake and Qmake to prepare the build system, but qmake is
intended only for testing and development.
$ cmake .
or
$ ccmake .
or
$ qmake

After that, compile the program:

$ make

If the program has been compiled sucessfully, you can install it:
$ sudo make install

Requirements
In order to successfully build and use VMPK, you need Qt 5.1 or newer. (install the -devel
package for your system, or download the open source edition from qt-project.org
Drusmtick RT is required for all platforms. It uses ALSA sequencer in Linux, WinMM in
Windows and CoreMIDI in Mac OSX, which are the native MIDI systems in each
supported platform.
The build system is based on CMake.
You need also the GCC C++ compiler. MinGW is a Windows port.
Optionally, you can buid a Windows setup program using NSIS.

Notes for windows users

To compile the sources in Windows, you need to download either the .bz2 or .gz archive
and uncompress it using any utility that supports the format, like 7-Zip.
To configure the sources, you need qmake (from Qt5) or CMake. You need to set the
PATH including the directories for Qt5 binaries, MinGW binaries, and also CMake
binaries. The program CMakeSetup.exe is the graphic version of CMake for Windows.
For some hints on using the program in Windows, please see MIDI connections.

Notes for Mac OSX users

You can find a precompiled universal app bundle, including Qt5 runtime libraries, at the
project download area. If you prefer to install from sources, CMake or Qmake can be
used to build the application bundle linked to the installed system libraries. You can use
Qt5 either from qt-project.org or packages from Homebrew.
The build system is configured to create an universal binary (x86+ppc) into an app
bundle. You need the Apple development tools and frameworks, as well as Qt5.
To compile VMPK using Makefiles, generated by qmake:
$ qmake vmpk.pro -spec macx-g++
$ make
optionally:
$ macdeployqt build/vmpk.app

To compile using Makefiles, generated by CMake:

$ cmake -G "Unix Makefiles" .
$ make

To create Xcode project files:

$ qmake vmpk.pro -spec macx-xcode
or
$ cmake -G Xcode .

If you need something to produce noise, maybe you want to take a look to SimpleSynth,
FluidSynth. For MIDI routing, there is also MIDI Patchbay.

Notes for packagers and advanced users

You can ask the compiler for some optimisation when building the program. There are
two ways: first, using a predefined build type.
$ cmake . -DCMAKE_BUILD_TYPE=Release

The CMake "Release" type uses the compiler flags: "-O3 -DNDEBUG". Other predefined
build types are "Debug", "RelWithDebInfo", and "MinSizeRel". The second way is to
choose the compiler flags yourself.
$ export CXXFLAGS="-O2 -march=native -mtune=native -DNDEBUG"
$ cmake .

You need to find the better CXXFLAGS for your own system.
If you want to install the program at some place other than the default (/usr/local) use
the following CMake option:
$ cmake . -DCMAKE_INSTALL_PREFIX=/usr

Acknowledgements
In addition to the aforementioned tools, VMPK uses work from the following open
source projects.
from Qtractor, by Rui Nuno Capela
Instrument definition data classes
Icon and logo by Theresa Knott
This page uses the Wordsworth 3 free template by Lee Baillie
This page uses Lightbox2 by Lokesh Dhakar
Thank you very much!

Available Languages
English
espaol

Contents
Introduction
Getting started
MIDI concepts
Keyboard maps and instrument definitions
MIDI connections and virtual MIDI cables
FAQ
Download
Installation
Requirements

Notes for windows users

Notes for Mac OSX users
Notes for packagers and advanced users
Acknowledgements

I USE IT

You can support Virtual MIDI Piano Keyboard by adding it to your

stack at OpenHub

Project Links
Blog
openhub.net
freecode.com
Google+
qt-apps.org
Hitsquad Music Software Downloads
linuxaudio.org

Virtual MIDI Piano Keyboard

google.com/+VirtualMIDIPianoKeyb
board_VMP

Follow
+ 103

+1

Related Software (multiplatform)

QSynth
FluidSynth

Related Software for Linux

QjackCtl
KMidimon
KMetronome

Related Software for Windows

CoolSoft Virtual MIDI Synth
MIDI Yoke
MIDIOX

Related Software for Mac OSX

SimpleSynth
MIDI Patchbay

Project hosted by SourceForge.net