The document provides specifications for the FAPN102-R-10L fire alarm panel. It has 10 alarm input zones, supports up to 30 smoke detectors per zone, and can connect to a maximum of 100 detectors total. Additional features include alarm verification, programmable functions, automatic self-checking, and outputs to connect alarm bells and location lamps. The panel operates on 220VAC power and has a built-in Ni-Cd battery as a backup power source. It is wall mountable and measures 435mm x 310mm x 73mm.
The document provides specifications for the FAPN102-R-10L fire alarm panel. It has 10 alarm input zones, supports up to 30 smoke detectors per zone, and can connect to a maximum of 100 detectors total. Additional features include alarm verification, programmable functions, automatic self-checking, and outputs to connect alarm bells and location lamps. The panel operates on 220VAC power and has a built-in Ni-Cd battery as a backup power source. It is wall mountable and measures 435mm x 310mm x 73mm.
The document provides specifications for the FAPN102-R-10L fire alarm panel. It has 10 alarm input zones, supports up to 30 smoke detectors per zone, and can connect to a maximum of 100 detectors total. Additional features include alarm verification, programmable functions, automatic self-checking, and outputs to connect alarm bells and location lamps. The panel operates on 220VAC power and has a built-in Ni-Cd battery as a backup power source. It is wall mountable and measures 435mm x 310mm x 73mm.
The document provides specifications for the FAPN102-R-10L fire alarm panel. It has 10 alarm input zones, supports up to 30 smoke detectors per zone, and can connect to a maximum of 100 detectors total. Additional features include alarm verification, programmable functions, automatic self-checking, and outputs to connect alarm bells and location lamps. The panel operates on 220VAC power and has a built-in Ni-Cd battery as a backup power source. It is wall mountable and measures 435mm x 310mm x 73mm.
FA P N 10 2 -R -10 L FEATURES Very small enclosure 10-zone capacity only Conventional type Switch-lock protection for operation Easy-to-see front panel guidance Alarm verification type Name plate display for alarmed zones Ni-Cd stand-by battery built in Telephone handset built in for maintenance Programmable function on front panel Automatic self-checking Various test facilities for maintenance Surge arrestor built in for power lines WALL MOUNTING TYPE DESCRIPTION The FAPN102-R-10L fire alarm panel was developed to provide a cost- and space-saving conventional fire alarm panel together with more user-oriented functions. The size of the fire alarm panel is approximately 17% smaller than that of our FAP129N series 10-zone fire alarm panel. The cabinet is made of ABS resin non-flammability to UL94V2. The fire alarm panel equips with the function to lock the operation of its front panel. That is useful to prevent the unauthorized persons from operating the front panel. <Alarm Inputs> Conventional fire detectors and manual alarm boxes are connected to alarm input circuits to give visual and audible alarm at the panel and to actuate alarm bells. The FAPN102-R-10L fire alarm panel has 10 alarm input circuits (zones). <Auxiliary input> An auxiliary input signal can be connected to an auxiliary input circuit to be displayed on the panel. It may be used for a non-alarm input signal. <Signal Outputs> 2 representative alarm signals are available. 10 voltage-free contacts are available for signal output when an optional unit is used. A group of output signal for an annunciator panel is available when an optional unit is used. <Alarm bell activation> There are 2 modes to activate alarm bells. One is to actuate all alarm bells at the same time, called general alarm. The other is to actuate a group of alarm bells depending on the location of a fire, called localized alarm.
One pair of terminals is available for the general alarm. The
programmable 10 voltage-free contacts are used for the localized alarm when an optional unit is connected to the panel. <Automatic self-checking> The following are automatically monitored at all time. Detector circuits for continuity Connection of the battery and fuse blown-out Microcomputer chip and memory chips for abnormal running Main fuse for blown-out Emergency voice alarm communication system circuit for continuity and short <Programming> The following are programmable for setting and canceling on the front panel. Non used-alarm input circuits without putting dummy loads Alarm verification function to alarm-input circuits Interlocking an auxiliary input signal with an audible alarm at the panel Interlocking alarm input signals with representative alarm signals An audible alarm at the panel during main power off Interlocking alarm input signals with 10 voltage-free contact outputs. <Fire protection-related device control> The FAPN102-R-10L fire alarm panel is dedicated to the fire alarm function. For controlling fire protection-related devices such as smoke vents, fire extinguishing system etc., the FCS128N series fire alarm panel is available. Contact our distributor in your region for the details of FCS128N series.
HEAD OFFICE7-3, Kudan-Minami 4-chome, Chiyoda-ku, Tokyo 102-8277, Japan PHONE
813-3265-0231 FAX 813-3265-5348
FIRE ALARM PANEL FAPN102-R-10L
CAT. NO.
D -F-13001
TYPICAL WIRING DIAGRAM
(T)
(A)
End-of-line resistor 10K1/2W
Manual fire alarm box
Alarm signal lines (L)
Detector circuits : Max. 30 Smoke detectors per circuits.
No limit for contact type heat detectors.
Common line (C)
Fire alarm bell
NUMBER of WIRESBASIC
Fire alarm bell
nAlarm signal lines (L)
1Common line (C) for every 7 circuits 1Telephone line (T) 1Response line (A) 2Fire alarm bell lines (B) 2Location lamp lines (PL)
Note : An optional unit is required for the fire alarm
panel when the annunciator is connected.
Resistance of detector circuits :
Less than 50/Loop Terminals : for use with 0.81.6mm wire
Fire alarm panel
SPECIFICATIONS Model no. TYPE POWER SUPPLY AUXILIARY POWER SUPPLY CIRCUITS VOLTAGE POWER CONSUMPTION NOMINAL ALARM VERIFICATION TIME MAXIMUM NUMBER OF APPARATUS TO BE CONNECTED AMBIENT TEMPERATURE LOOP RESISTANCE OF ALARM INPUT CIRCUIT END-OF-LINE RESISTOR TERMINAL BLOCK MATERIALSENCLOSURE COLOR DIMENSIONS WEIGHT
FAPN102-R-10L Wall-mounting type 220VAC 50/60Hz Ni-cd battery24VDC, 0.45Ah 5, 24, 48VDC, 24VAC Approx. 30VA for monitoring Approx. 60VA for alarming 60sec. Spot type smoke detectors : 30/zoneMax.100/panel Projected beam type smoke detectors : 2/zone Alarm bells : 2024VDC, 10mA/bell Location Lamps : 730V, 2W/lamp2024VDC, 21mA/lamp 0 to 40 Less than 50/loop 10k, 1/2W Insert type terminals suitable for solid conductors with a diameter of 0.8 to 1.6 mm Use pin type solderless contacts for stranded conductors. ABS resin with non-flammability to 94V2UL Light gray : Nearly to Munsell no. 5.0Y 8.5/1.0 435mm H 310mm W 73mm D Approx. 4kg
ORDERING INFORMATION 10-zone fire alarm panel
FAPN102-R-10L
These
instructions do not purport to cover all the details or variations in the equipment described, nor provide for every possible contingency to be met in connection with installation, operation and maintenance. Specifications are subject to change without notice. Contact Nohmi before relying on above specifications. Actual performance is based on proper application of the product by a qualified professional. Should further information be desired or should particular problems arise, which are not covered sufficiently for the purchaser's purposes, the matter should be referred to Nohmi or a distributer in your region.
OFFICE7-3, Kudan Minami 4-chome,
Chiyoda-ku, Tokyo 102-8277, Japan PHONE 813-3265-0231 F A X 813-3265-5348 U R L http://www.nohmi.co.jp/eigo2/ HEAD
