Operation and Maintenance Manual: 1 5t J Series Counterbalanced Battery Forklift Truck

Download as pdf or txt
Download as pdf or txt
You are on page 1of 78

CPD10/15/18/20/25/30J

CPD10/15/18/20/25/30J D1
CPD10/15/18/20/25/30/35J C1
CPD10/15/18/20/25/30/35J C2
CPD40/45/50J D1
CPD40/45/50J C2

15t

J Series Counterbalanced Battery Forklift Truck

OPERATION AND MAINTENANCE


MANUAL

Original Instruction

HANGCHA GROUP CO., LTD.


Dec. 2010 5th edition

FOREWORD
Thanks for you purchasing our J series battery forklift truck.
Four wheel counterbalanced battery forklift truck is our companys new product. It has the character of
small turning radius, beautiful shape, small dimensions, low gravity, good stability, superior performance.
This operation manual is the explanations that how to use 1-5tJ series forklift truck correctly. It will instruct
you how to operate safety and precautionary maintenance. To ensure safety and exert the trucks potential,
all the personnel that in charge of operation, maintenance and management must read this manual
thoroughly before starting work with the forklift.
As the improvements of products of our company, maybe there are some differs between this operation
manual with your forklift truck.
If you have any questions please keep touches with HANGCHA GROUP CO., LTD. sales department or
let the agents know.
Tow electric

Rise electric

Rated capacityt/

control

control

load centre distancemm

CPD10/15/18/20/25/30J

1244(CURTIS)

EVC255(CURTIS)

1.0/500,1.5/500,1.8/500,2.0/500,

CPD10/15/18/20/25/30J D1

ACS(Danaher)

ACS((Danaher)

2.5/500,3/500

CPD10/15/18/20/25/30/35J C1

1238(CURTIS)

EVC255(CURTIS)

CPD10/15/18/20/25/30/35J C2

1238(CURTIS)

1236(CURTIS)

CPD40/45/50J D1

ACS(Danaher)

ACS(Danaher)

Truck model

CPD40/45/50J C2

Dec. 2010 5th edition

1238(CURTIS)

1238(CURTIS)

HANGCHA GROUP CO., LTD.

1.0/500,1.5/500,1.8/500,2.0/500,
2.5/500,3/500,3.5/300
1.0/500,1.5/500,1.8/500,2.0/500,
2.5/500,3/500,3.5/300
4.0/500,4.5/500,5.0/500

4.0/500,4.5/500,5.0/500

CONTENT
Foreword
1. Name of main parts or component ......................................................................................... 1
2.Instrument and Controls .......................................................................................................... 2
Meter Panel ......................................................................................................................... 3
Controls ............................................................................................................................... 8
3.Body and Others .................................................................................................................... 10
4.Safety instructions ................................................................................................................. 12
5.The structure and stability of truck ....................................................................................... 17
6.Running-in of the new truck.................................................................................................. 20
7.Daily maintenance ................................................................................................................. 21
8.Driving and operation............................................................................................................ 25
Driving .............................................................................................................................. 25
Traveling ........................................................................................................................... 25
Turning .............................................................................................................................. 25
Stopping or parking ........................................................................................................... 26
Loading.............................................................................................................................. 26
Stacking load ..................................................................................................................... 27
Un-stacking load ............................................................................................................... 27
Check after operation ........................................................................................................ 28
9.Deposit .................................................................................................................................. 29
10.Storage battery..................................................................................................................... 30
The Automatic Watering System of the Forklift Battery................................................... 38
11.Maintenance summarization................................................................................................ 42
Preventive maintenance schedule...................................................................................... 43
Replace the key safe parts termly ...................................................................................... 49
Table for bolts tight torque ............................................................................................... 50
Table for oil used in the truck ............................................................................................ 50
12.Trucks convey, lifting, towing............................................................................................ 51
13.Parameters ........................................................................................................................... 52
14.Scutcheon ............................................................................................................................ 61
15.The use, assembly and safe rules of attachment.................................................................. 66
16.Related safety instruction and standard ............................................................................... 68
17.Maintenance record ............................................................................................................. 70

1. Name of main parts or component

1. Fork

2. Fork carriage

3. Mast

4.Lifting cylinder

5. Overhead guard

6.Steering wheel

7. Seat

8. Counterbalance

9. Rear wheel

10. Chassis

11. Left and Right battery


cover hood

12. Front wheel

2.Instrument and Controls

1. Steering wheel

2. Direction switches

3. Parking brake lever

4.Emergency disconnect switch

5. Adjusting lever

6. Brake pedal

7. Accelerator

8. Key switch

9.Turning signal switch

10. Lifting lever

11. Tilting lever

12. Meter panel

13. Horn button

Meter Panel
CPD10/15/18/20/25/30/35JC1
CPD10/15/18/20/25/30/35JC2
CPD10/15/18/20/25/30J
CPD40/45/50J C2

ABattery warning
As the following diagram shows, from
the left to the right, the battery decreases
from full state to the only one case, which
represents that the battery leaves only 20%.
Thus the whole battery indicator bar will
twinkle, and the state indicator lamp will be
bright, now please stop working and charge
immediately.

gradient and so on is much higher. It is


applied for transporting mass of good in
short time and climbing big gradient slop
but it costs more energyso the mode will not be
used in normal state except emergency.

Mode P is power mode. All kinds of


index are lower than that of super mode. It is
applied for the case of long distance
transporting and needing higher power or
speed.
Mode E is economical mode. All the
parameters are optimized. Working in this
mode can save power so it is applied for a
long time work after charging, and it is
suggested to work in this mode in normal
work-time.
Mode SPE is safe mode. Thus the max
vehicle speed is limited to about 7km/h. It is
applied for working in busy storage and
cabined room.
Notice: the default mode is mode E. after
power cutting every time, the work mode
resets to mode E no matter which mode it is
before power cutting, but the switch key is
still in the mode before turn off.

The mode can be switched through the


mode switch button (G) among the mode of
S, P, E, SPE, as the above diagram shows.
CParking brake indicator lamp
NoticeCharging in time is very important,
otherwise it will affect the lift-span of
battery
BMode indication

When using the parking brake, the lamp will


As the diagram shows, the pictures
from the left to the right represent the mode
of S, P, E, SPE respectively
Mode S is super mode, thus the trucks
acceleration, deceleration rate, max climbing

be bright.

DState indicator lamp


3

When there is something wrong with


the

electrical

controller,

or

operate

improperly, the battery is in lower power,


the lamp will be bright and twinkles.
EError code display area

Display the
controller.

error

code

of

electrical

NoticeTRAVEL is the error code of tow


electrical controller, HYD is the error
code of pump controller. TRAVEL OK
means it works without error
Notice the error code of tow electrical
controller refers to the appendix.

FWork-time accumulate timer


When the truck key switch turns on, the
left hour timer will start to time. The
minimal resolution is 10% of an hour, the
other two hour timers are not used.

CPD10/15/20/25/30/35J D1
CPD40/45/50J D1

D
F

S P EED

12

k m/h

B AT%

The meanings of 6 indicators:

Communicate indicator (A)

80

Low battery warning (C)

When battery quantity is lower than 20%


of maximum capacity, the indicator lights
are on, at the same time, buzzer beep.
When LED shows no power, please
charge battery as quick as possible.

Only lights on when record program,


usually it is no use.
Speed limited indicator (D)

Error indicator (B)

When operation is wrong or the truck is


in trouble, error code will display on the
dashboard. The error indicator lights on.

When this lamp lights, it meanings the


truck working at low speed mode. The
maximum speed of truck decreased.
Press button 1, you can switch the high
speed and low speed mode.

Accelerate indicator (E)

Backup button (J)

When this lamp lights on, it means the


truck working at low acceleration mode.
The maximum acceleration decreased.
Press button 2, you can switch the high
acceleration and low acceleration mode.

This button is no use for operator.

4
Backup button (K)

This button is no use for operator


Parking brake indicator (F)

When pulling on the parking brake lever,


this lamp lights on.

5
Switch button of hour indicationL
Push this button, it will display the total
hours of truck, as follow figure:

Entrance button (G)

This button is no use for operator.

K E Y ON

2 8H
B AT%

80

Push again, it switch to the total traction


hour.
T R AC T

Speed limited button (H)

Press this button to switch the high speed


and low speed.

T IME

T IME

1 8H
B AT%

80

Push the button once again, it switch to


speed display mode.
Dashboard display LED (M)

2
Accelerator limited button (I)

Press this button to switch the high


acceleration and low acceleration.

When turn on the key switch, the system


will self-diagnose, the lamp will lights on
one by one. After self-diagnose, LED
will display truck speed and battery
capacity. You can know your trucks
working condition through the LED
dashboard.
Key switch

The key switch has two on/ off


position, you should push the Direction
switch lever to neutral and loose the
accelerator pedal, then turning the key
switch to on position clockwise.

Rear big lamp switch (optional)

Caution!

1. Turning the key switch on does not


make the forklift truck move, if the
Direction switch lever is not in the neutral
position or the accelerator pedal is pushing.
2. Error code maybe appear, dont worry
about it.
3. The Direction switch lever should be
returned to neutral and move you foot from
the accelerator pedal. Then the truck can be
operated.
4. Then the error code should be
disappeared.

Rear big lamp switch (push\pull) has


only one shift.
Connector
battery
Position
0

Means connected
Caution!

Far light

This light does not relate to key switch


position, so please dont forget to turn off
the rear big lamp when you leave the
truck.

Horn button [13]

Fuse box

Press the rubber cover at the center of


steering wheel to sound horn. The horn
sounds even when the key switch is in
the off position.

J\JC1\JC2 Series

Combined light switch [9]

This combined light switch is composed


of turning light switch and big/small
lamp switch. Turning light indicates the
traveling direction. When turn on the
switch, the lamp flashes.
Forward
Neutral
Backward

Left turning lamp flashes


Lamp goes off
Right turning lamp flashes

Caution!

The turn signal lever does not


automatically return to the neutral
position. Reset it by your hand.
Big/small lamp switch has two shifts.
First shift small lamp lights on; second
shift big and small lamp both light up.
Emergency disconnect switch [4]

When happen emergency, presses down


the emergency disconnect switch, and
then the main power of the truck will be
cut off, the truck stops working.

1st is a diode preventing from connecting


in reverse.
2nd is a control circuit fuse (10A).
3rd and 4th are fuses for light and horn
circuit. (10A respectively)
5th is light fuse 10A.
6th is spare fuse 10A.
JD1
1st is control circuit10A.
2nd is main contact circuit fuse 10A.
3rd is instrument fuse 10A.
4th and 5th is light fuse 10A.
6th is spare fuse 10A.
Caution!
When replace a new fuse, please choose the
same capacity fuse of the old one.

Caution!

Please dont use the emergency


disconnect switch to substitute the
function of key switch.

Controls
Steering wheel [1]

The steering hand-wheel is operated


in the conventional manner, that is, when
the wheel is turn right, the truck will turn
to the right; when the wheel is turn left,
the truck will turn to the left. The steer
wheels are located at the rear of the truck.
These cause the rear of the truck to swing
out when a turn is made.
Warning!

This truck is provided with the


power steering, so heavy hand-wheel
operation is caused when the steering
motor comes to a stall. To put the power
steering in operation again, restart the
steering motor without delay.
Parking brake lever [3]

Use this parking brake lever to park


the lift truck. And the parking brakes are
applied on the front two wheels by
pulling up on this lever. To release the
parking brakes, move the lever forwards.
There is a micro switch at the left
side of the parking brake lever, tense the
lever makes running invalid.

pressed, the forklift trucks moved


forward. When the lever is pushed
backward, the forklift trucks moved
backward.
Caution!

While traveling, if change the


Forward- Reverse lever, electric braking
will operatespeed will lower until stop
then travel to the opposite direction.
Warning!

Turning the key switch on does not


make the forklift truck move, if the
Forward-Reverse lever is not in the
neutral position or the accelerator pedal
is being pressed. In this case, the
Forward-Reverse lever should be
returned to neutral and move you foot
from the accelerator pedal. Then the
truck can be operated.

Lifting lever [10]

For the truck of CE: if you leave the seat


without tensing the lever, it will warn and
remind you to tense the lever.
Warning!
If parking on a grade is unavoidable, be sure to
block the wheel.
Forward-reverse lever [2]

The forward-reverse lever is used for


switching
between
forward
and
backward moves. When the lever is
pushed forward and accelerator pedal
8

The forks can be raised or fell by


pulling backwards or pushing the lever.
Lifting speed can be controlled by tilt
backwards angle of lever and the
lowering speed can be controlled by tilt
forwards angle of the lever.

Tilting lever [11]

Caution!
Loosen the accelerator pedal when truck
is working, truck can make soft brake

The mast can be tilted by operation


of this tilt lever. Pulling on this lever
backwards will tilt the mast backwards,
and pushing it forwards will tilt the mast
forwards. The tilt speed can be controlled
by tilt angle of the lever.
Caution!

The tilt lock mechanism built in the


hydraulic control valve does not allow
the mast to tilt forwards while the
electricity is being shut down even if the
tilt lever is pushed forwards.
Pedals
Brake pedal [6]

Press this pedal to slow or stop the


truck. At the same time, the brake light
comes on.
Caution!

No permitted to press the brake pedal and


the accelerator pedal at same time,
otherwise, it is harmful to the traveling
motor.
Accelerator pedal [7]

As the accelerator pedal is slowly


pressed, the drive motor start turning and
the forklift truck will start to move.
According to the force applied to the
pedal, the speed is adjusted with not
steps.
Warning!

Before open the key switch to press


the accelerator pedal, the more function
digital indicator shall show alarm
information. Then you must release the
accelerator pedal.
9

3.Body and Others


Seat
Adjust operator seat to the position
where is comfortable for you and
provides
easy
controls.
Before
proceeding with work, adjust operators
seat and make sure that it is securely
locked. Adjust the operator weight
through rock- suspends system level. The
rear of the seat is adjustable.
Seat switch (only for trucks exporting
to Europe or option)
For the safe of truck, when you leave
the seat longer than 5 seconds, the truck
will stop traveling.
Safety belt
Please keep back and waist close to
seat as far as possible, and fix safety belt
at the same time.
Inspect whether bolts fixed belt are
loose or not. Do not use belt with a knot.
Do not make belt press on stiff or fragile
things, and do not make belt attrite with
sharp things to avoid wearing. Do not
make seat backrest too be tilted;
otherwise safety belt may not extend
correctly.
Do not remove any part of belt at
will. Please often inspect the belt used
frequently, if found any abnormal,
replace it at once. And the life for use is
3-5 years, scrap it ahead of schedule if
found any abnormal.
There is a safety belt on the seat,
before you operate the forklift truck,
please fasten the seat belt to protect
yourself.
Overhead safe guard
The overhead guard used is strong
enough to meet safety standard, and
protects the operator from falling
materials. The top gap is used to lift the
batteries. It is forbidden for use a truck
that does not with safeguard.
Hood
The hood can be swung up fully to
provide easy examining and maintenance of
10

the storage batteries.


You can lift up the hood with little
effort with an aid of hood damper. To
lock the hood, push down on the front of
hood until it covered.
Caution!
Be careful do not to catch you fingers in
the hood when closing it.
Depress the spring insurance before you close
the hood, then press the head of the hood.

Left & Right battery cover hood


The battery is covered hood, one left
and one right. When you want to take off
the hood, you should take off the knob at
first.
Fork stopper

Fork stoppers are locked the forks in


position. To adjust fork spacing, pull up
fork stoppers, turn 90and shift the forks
to the desired position. The fork spacing
should be adjusting according to loads to
be handled.
Warning!

The
forks
should
be
set
symmetrically to machine centerline and
fork stoppers should always be locked
again.
There are one gap on the below
beam. It is used to attach goods.
It is forbidden to lock the fork on the gap
position, to prevent the fork fall off from
the gap.
In the middle of the above beam, a
bolt used to prevent fork works here.
Please change the bolt as soon as it is
damaged.

Change fork

Steering column tilting angle adjuster

Take down the old fork: Firstly,


locate the fork to the middle, decline it to
the ground and make the mast forward,
then operate the truck traveling backward,
the fork will be taken down.
Change new fork: Firstly, make the
fork dead against the truck and forklifts
mast to the bottom, then operate the truck
traveling forward, aim at the two gaps
and beams, and raise the mast. Adjust the
position of the fork.
Safety step and safety grip
The safely steps are provided on
both side of the truck body. The safely
grip is provided on the front left pillar of
the overhead guard. Use the safely step
and safely grip when mounting and
dismounting the truck.
Brake fluid reservoir cup
The brake fluid reservoir cup is
located at the meter board.
Caution!

The tilting angle of the steering


column is adjustable to suit individual
operators. Turn the hand lever upward to
release the steering column and locked
by turning it downward.
Hydraulic oil reservoir cap
The hydraulic oil reservoir cap is
located at the right rear end, below the
battery hood; open the right side battery
hood when adding oil. After fill in clean
hydraulic fluid, tighten lock the cap.

The brake fluid is poisonous, be


careful do not drop down. When add
brake fluid, be careful do not let dirt and
other thing drop into reservoir cup.

Air leakage plug

Head lights and combination lights

Chair disconnecting switch

Two headlights and combination


lights (turn signal, show width lamp) are
installed at the front side of the truck.
Take care of the lights, and wipe dirt, if
any, and replace any damaged light
immediately.

When the operator leaves seat, this


switch cut off, and the power of truck is
cut off.

Rear combination lights


The combination lights at the rear
side serve as turn signal, show width
lamp, brake lamp, and back-up lamp. Pay
attention to keep them from being
damaged or covered with dust, if any,
clean or replace immediately.

There is an air leakage plug on the


oil tank to let air in the tank goes out.
Youd better often check the plug and see
whether been jammed.

Safety seat belt (for the trucks


exporting to Europe or option)
There is a safety belt on the seat,
before you operate the forklift truck,
please fasten the seat belt to protect
yourself.
Rear big lamp (for the trucks
exporting to Europe or option)
The rear big lamp is set on the
safeguard. If it is broken, please replace a
new one at once.

11

4.Safety instructions
Only trained and authorized
operator shall be permitted to operate the
truck.
1.

2. Inspect the truck at periodic

intervals for oil or water leak,


deformation, lousiness, etc. If neglected,
short life of components will be caused
and in the worst case a fatal accident
would occur.

make sure having replaced good


parts during periodic check.

Wipe off oil, grease or water from the


floor board and foot and hand controls, if
any.

Strictly prohibit smoking and spark


nearby the storage battery when checking
it.
If maintenance on high position,
such as mast, front and rear lamp, please
be careful to prevent fall down or be
clamped.

Be careful do not be scalded when


inspect the motor, controller and etc.
3
whatsoever in trouble, you must
stop the forklift, hang a mark of danger
or trouble and take off the key, at the
same time inform the manager. Only
after the trouble is removed, you may use
the forklift.

If trouble occurs when lifting cargo,


to Climb or descend, or the storage
battery electrolyte, the hydraulic fluid,
the brake fluid has the revelation, please
organizes the personnel to repair
immediately.

12

4. Operator must wear helmet, safety


shoes and work clothes.
5. Because there will bring
exploding gas in the bosom of the battery,
prohibit any flame nearby it absolutely.

Do not let any tools close the two


terminal of the battery to avoid spark or
short circuit.
6. The movement road of forklift
should be solid and smooth coagulation
road or similar to the road suitable for
vehicle. Recheck the state of working
ground.
The considered climatic conditions
when the forklift
designs
are:
Temperature - 20-50; the wind
speed does not surpass 5m/s; the air
relative humidity is not bigger than 90%
(temperature 20). The forklift is not
suitable in the flammable explosive
working conditions.
7. Never mount or dismount the
moving truck. Use the safety step(s) and
safety grip facing the truck when
mounting or dismounting the truck.

8. Never attempt to work the


controls unless properly seated.
Before starting, adjust the seat so
you can get easy access to all hand and
foot control.
9. Before starting up, make sure that:

Please fasten seat bolts.

The parking brake lever is applied


securely.

The forward-reverse lever is in


neutral.

Before staring, make sure no one is


under, on and close to the truck.
Dont step the accelerate pedal or
control the lifting lever or tilting lever
before turning on power.
10. Operate the controls smoothly.
Avoid sudden stops or turns.
It is dangerous to make a sharp
brake. Otherwise the truck has the
possibility of overturn.
11. Pay attention to the route of the
truck; be sure to make a wide sight.
12. Never allow other person(s) to
ride on the forks, pallets or on the truck.
13. Taking account of the shape and
material of loads to be handled, use a
proper attachment and tools.

Avoid hoisting the load, with wire


rope hung on the forks or attachment,
since the wire rope may slide off. If
needed, a qualified personnel for slinging
operation should perform, making use of
a hook or crane arm attachment.

Take care not to protrude the forks


out of the load. The protruded fork tips
may damage or turn over the adjacent
load.
14. Know the rated capacity of your
lift truck and its attachment, if any, and
never exceed it.

Do not use a man as an additional


counterweight. Its quite dangerous.

15. Keep your mind on your work.


16. Keep your head, hands, arms,
feet and legs within the confines of the
operators compartment. Never stretch
out for any reason.

17. The pallet and skid used should


be strong enough to endure the load.
Never use damaged or deformed ones.
18. We afford all type of attachment,
such as rotating roll clamp, bale clamp,
side shifter, and crane jib etc. You should
refit the truck under ours license if you
want. It is forbidden to refit it by
yourself.
19. Safeguard protect you do not be
hurt by the goods fallen. Load bracket
protect you load goods smoothly. It is
forbidden to use truck without safeguard
or load bracket.
20. It is forbidden to walk down the
fork or the attachment.

It is forbidden to walk up the fork or


stand on the fork.

13

21. It is forbidden to put your hands,


arms or head stretch between the mast
and safeguard. Once clamped, the life
has danger.

It is forbidden to put your hands in


inner and outer mast.

22. The goods is liable to drop


turning or passing rough road when it
departures the center. And the forklift
may turn over more probably.
23. Dont stack loads on forks in
such a way that the top of loads exceeds
the load backrest height. If unavoidable,
make sure the load is fastened. When
handling bulky loads that restrict your
vision operate the truck in reverse or
have a guide. When lead by a guide,
make sure you understand hand, flag,
whistle or other signals. When handling
long loads such as pipe, lumber etc or in
the case of the Large-sized model, or
operate with long attachment, be
extremely careful of load end swing at
corners or in narrow aisles. Be alert for
others.
24. Use minimum forward and
14

reverse tilt when stacking and


un-stacking loads. Never tilt forward
unless load is over stack or at low lift
height.
When stacking loads on a high
place, once make the mast vertical at a
height of 15 to 20 cm above the ground
and then lift the load farther. Never
attempt to tilt the mast beyond vertical
when the load is raised high.

To un-stack loads from a high place,


insert forks into the pallet and drive
backwards, then lower the load. Tilt the
mast backwards after lowering. Never
attempt to tilt the mast with the load
raised high.
25. It is dangerous to travel with
forks higher than appropriate position
regardless of whether loaded or not.
Keep the good traveling posture. (When
traveling, the forks should be 15 to 30 cm
above the ground or floor and the mast
tilted backward)

Do not operate the side shift


mechanism, if equipped, when the forks
are raised and loaded, since this will
cause the truck to be unbalanced.
26. Watch for branches, cables,
doorways, or overhangs. Pay caution
when working in congested areas.

Slow down and sound horn at cross


aisles and other locations where vision is
restricted.

When make a turn, be sure the


speed of the truck is lower than the 1/3
max. of allowable speed.

27. Affirm keeping some distance


from roadside and flat roof.

28. Before driving over a dock-board


or bridge-plate, be sure that it is properly
secured and strong enough to sustain the
weigh.
29. When operating loaded truck,
have the rear end of your machine
pointed downhill.

When operating unloaded truck,


have the rear end of your machine
pointed upgrade.
Do not make a turn on the grade, in
order to avoid overturn.

30.the goods is liable to drop turning or


passing rough road when it departures the
center. And the forklift may turn over more
probably.

31. Never lift loads with the truck


inclined. Avoid loading work on a grade.
32. Never permit anyone to stand or
walk under upraised forks or other
attachments if machine is so equipped. If
unavoidable, use a safety stand or block
to prevent a possibility of fork
attachments falling down or moving
unexpectedly.
33. Inspect the surface over which
you will run. Look for holes, drop-offs,
obstacles, and look for rough spots. Look
for anything that might cause you to lose
control, bog down or upset.

Clear away trash and debris. Pick up


anything that might puncture a tire or let
the load lose balance.

Slow down for wet and slippery


roads. Stay away from the edge of the
road. If unavoidable, pay more attention.

Do not operate the truck when the


weather is execrable, such as windy,
thunder storm, snow and etc. Especially
when wind speed is higher than 5m/s,
dont operate the truck outside.
34An accumulator is required for
controller. Forbid to touch within B+ and
B- to prevent from wounding by
electricity. Before checking or cleaning,
please connect loads (contactor circuit or
horn for example) between B+ and Bfirst to discharge for capacitor of
controller.
35. Pulling the hand brake when
parking on flat. If necessarily parking on
ramp, you should place the wedges under
wheels.

Descending the fork to the ground


and keeping a little forward tilting, shut
off key switch and take off key.

Pull out the battery plug.

The parking place must be far away


from fireworks.

15

36. You can tow the forklift to the


safe place with towing pin when the
forklift cant run.
Dont tow the truck which steering
system or brake system has been
damaged.

load cargo.

37. There is operating method and


warning label on the truck. Please
operate the truck obey the rules on the
label and this manual. Often inspect the
nameplate, when damaged or lost please
replace it.

44. Only in the event that the truck


manufacturer is no longer in business and
there is no successor in the interest to the
business, the user may arrange for a
modification or alteration to a powered
industrial truck provided, however, that
the user shall:
a) Arrange for the modification or
alteration to be designed, tested and
implemented by an engineer(s) expert in
industrial trucks and their safety;
b) Maintain a permanent record of
the design, test(s) and implementation of the
modification or alteration;
c) Approve and make appropriate
changes to the capacity plate(s), decals,
tags and instruction handbook;
d) Affix a permanent and readily
visible label to the truck stating the
manner in which the truck has been
modified or altered together with the date
of the modification or alteration, and the
name and address of theorganisation that
accomplished the tasks.

38. Fire extinguisher must be


prepared at working place. Users can
select fire extinguisher along with truck,
and it usually is fixed on rear supported
leg of safety shelf, it is easy to pick.
Driver and manager should be
familiar with the position and operation
of fire extinguisher.
39. Please use stock when conveying
little goods, it is forbidden to use fork
directly.
40The work road surface for forklift
should be stability and unknit, cement,
blacktop or beton. If there are snow, ice,
water or other eyewinker, bar. Eliminate
all, then work. Otherwise the truck will
be out of control and lead the safety
accident.
41. Move the truck to the place which
respects traffic when it anchors. If the
reason is brake or turn system, move it
by a suitable truck (Reference the part of
truck move); Other reasons, use a suitable
truck to traipse, tie the cord outside of
truck. Please abide by the traffic
regulations when traipse the truck on
calzada.
42. After take-down the hood, water
tank cover board, overhead, backrest of
mast, unallowed to operate the truck or
16

43. There are enough light at truck


work ground. At night, open the head
lamp to collocate enough lamp-house.

5.The structure and stability of truckPrevent the forklift to turn


over!
It is very important for operator to know the trucks structure and relationship between
load and stability.
Caution the structure of the truck
The basic structure of the truck is mast (include mast and
forks) and body (include tire).
The lift truck keeps the balance of weight between
the truck body and the load on the forks with the center
of the front wheels as a fulcrum when the rated
capacity load is placed in position.
Due care should be paid to the gravity center of
loads and forklift to maintain the stability of the truck.

Caution

Load center

There is difference in gravity because of the loads


shape, such as box, board and large roller. It is very
important to distinguish the difference of the gravity
center of loads for evaluating the trucks stability.

Warning!

If the truck will turn over, do not attempt to get out of the truck because the speed of
overturn is much faster than your speed. You should hold the steering wheel handle, stretch
your feet, and this practice will let you in the seats. Operator fastens the safety belt please.

17

Caution Gravity center and stability

The combined gravity center that is


composed of the forklift center and the load
gravity center determine the stability of lift
trucks.
When unloaded, the barycenter does not
change; when loaded, the barycenter is
determined by the truck and the loads center.
The barycenter is also determined by the
tilting and lifting of the mast.
The combined center is determined by these
factors:
Loads size, weight and shape
The lifting height
The tilting angle
The acceleration
The radius of turning
The road and grades angle
The attachments

Caution! The stability zone of the barycenter


In order to make the truck stable, the combined
center must be in the triangle which is made up of
two points that the two front wheels attach ground
and the midpoint of the back axle.
If the combined center is in the front driving
axle, the two front wheels become two fulcrums,
the truck will overturn. If the combined center
departures the triangle, the trucks shall overturn in
the corresponding direction.

Caution

The max. loadweight and load center distance

The load center distance is defined that: the


distance between the load center and the fork
carriage or the front of the fork carriage. The max.
load means the maximum load the truck can charge
at the normal load center distance. The relation
between the max. load and load center distance
shows on the capacity chart. You should reduce the
weight of load if the load center distance inclines to
the fork carriage.
18

Caution

Capacity chart

The chart given shows the relation between the


load center and the weight of loads.
Before loading, make sure that the load and the
load center distance in the range of capacity chart.
If the loads shape is complex, put the most
weightily part on the middle of the forks, and
close to the fork carriage.

Caution

Velocity and acceleration

One object will keep quiescence until force works on it. Also, a moving object will
keep moving until force works on it .This is just inertia.
According to inertia, when truck starts moving, one force works backwards, and when
truck stops moving, one force works forwards. So, its dangerous to brake suddenly,
because it causes one large force works forwards, and its easy to cause truck overturn or
load slide off.
When the forklift makes a turn, will exert a centrifugal force outward from the curve
center. This strength pushes forklift outwards and causes it to turn over. About stability
region is very small, so decelerate when turning. If the cargo transported at the high
position, its easier to turn over.

19

6.Running-in of the new truck


We recommended operating the machine under light load conditions for the first stage
of operation to get the most from it. Especially the requirements given below should be
observed while the machine is in a stage of 100 hours of operation.
1. Must prevent the new battery from over discharging when early used. Usually should
recharge when discharging down to 20%.
2. Perform specified preventive maintenance services carefully and completely.
3. Avoid sudden stop, starts or turns.
4. Oil changes and lubrication are recommended to do earlier than specified.
5. Limited load is 7080% of the rated load.

20

7.Daily maintenance

Warning!

The earnest complete maintenance, can

When using an air compressor, at first,

keep the forklift to be at the good status. And

adjust the air pressure of the compressor.

the safety of the truck is related with your

Otherwise it will cause a serious accident,

job and your life.

since the maximum pressure of compressor

higher than the pressure tire can bear.

Warning

except

checking

lights

and

operating

capability, you should shut off the key

Tire Pressure (GB/T2982-2001)

switch and pull out the plug before checking


electric system.

prohibit operate forklift with trouble.

little trouble brings big accident.

1. Inspect oil leakage: include hydraulic


oil, electrolyte and brake fluid
Inspect connector of the oil pipe and
storage battery to see whether there is any
leakage. Use your hand or eyes to inspect,
Forbid to use a flame.

2. Inspect tire
Turn the tire valve cap counter
clock-wise and move it. Using a tire pressure
gauge, measure the inflation pressure, and
adjusting it to the specified pressure, if
needed. After making sure there is no air
leakage from the tire valve, reinstall the cap.
Check that each tire does not get damaged at
the tread surface or side face. Make sure the
wheel felloe is not bended.

Truck
type

Driving
wheel

Turning wheel
(rear wheel)

(front wheel)

1-1.5t

860KPa

1000KPa

1.8t

1000KPa

1000KPa

2-2.5t

850KPa

900 KPa

3.0t

850KPa

900KPa

3.5t

850KPa

900KPa

4-5t

930 KPa

860KPa

Caution!
Above for the pneumatic tire pressure, is not
suitable the solid tire.

Warning!
Since the tires of forklift truck need have a
high inflation pressure to carry heavy loads,
even a small bending of rims or a little
damage at the tread surface could cause an
accident.

21

Warning!
All bolts and nuts should be screw tight
to the stipulation torque after the tire and the
wheel felloe was assembled, then charge is
allowed. Types have expansion energy after
changing, so the tire pressure does not
surpass the rating.
Please put the tire in a protection frame
or tie it with a iron chain when charging to
prevent accident happening.

Tighten torque refers to <<Bolt tighten


torque force table>>

3. Replace tire

Truck type

When the tire is damaged, you should


replace it in time. Use a jack to make the tire
just beyond ground, then put a wood block
under the chassis. Loosen nut or ,
replace a new tire. Tighten the nut crossly
and symmetrically.

Front nut

Rear nut

1-1.8t

157-176 N.m

76-107 N.m

2-3.5t

441-588N.m

157-176 N.m

4-5t

441-588N.m

157-176 N.m

5. Check brake pedal


4. Inspect the torque of hub nut
Check the torque of hub nut whether meet
the requirement.
Hub nut
Divided rim bolt (some trucks do not
have )
Driving axle bolt
Rear hub nut
Divided rim bolt
Driving wheel (front wheel, expect 1-1.5t)

Step the brake pedal, check it for


slowness or block. The proper brake distance
is 2.5m when free load. Adjust the height of
pedal to 115125mm. Adjust brake booster
push rod clearance to 1-3mm. The brake
lamp should be lighted when the brake pedal
steps on 10-20mm.

6. Check the parking brake lever


The force of hand brake lever is adjusted by
the bolt on the top of lever. The force
increases clock-wise screwing, and decreases
counter lock-wise screw.
Caution
To step the brake pedal is helpful to tighten
or loose the hand brake lever.

turning wheel(rear wheel), driving wheel(1.5t)

22

7. Check accelerate pedal


The acceleration changes as the stroke
changes.

8. Brake fluid level check


Open the brake lubricated cap cover. Check
the fluid level in the range allowed. If lack,
please add, and check if there is air mix into
the pipe.
Caution

Please use brake fluid with one type, do not


mix.
Dont spatter the brake oil onto the surface
of paint otherwise the paint will be damaged.

When adding fluid, due should be taken to


prevent dirt or water from entering the
reservoir.

9. Check hydraulic oil


Loose the cap of hydraulic oil inside of right
frame, pull out dipstick and check it if the oil
level is between the scales. Add oil when
lack.

5) Loose the cap of hydraulic oil, pull


out dipstick
6) Set a plate under the chassis, then
loose the fuel drain plug, and put the old oil;
7) Dispose the old oil according to local
environmental protection laws;
8) Twist the fuel drain plug, join the new
hydraulic fluid, and inspect whether have a
leakage;
9) Start the truck, lifting for 3-5 times,
and tilting for 3-5 times;
10) Add hydraulic oil to required scale.

11. Drivers seat adjustment


Make sure the drivers seat is properly
located. If not properly, shift the adjusting
lever to the right and move the drivers seat
to a position which provides easy access to
all foot and hand controls. After adjustment,
shake the drivers seat a little to be sure that
it is securely locked. Adjust the weight.

12. Check battery


Check the battery whether be installed
firmly.
Check proportion of electrolyte. Refer
to battery section.
Check the terminal for loose or damage.
Otherwise it will be adjust or replace.

10. Replace hydraulic oil


Replace hydraulic oil once half year on
schedule.
1) Stop the truck on smooth ground;
2) Turn steering wheel right to the
bottom, and enable the fuel drain plug to
have the enough space;
3) Tilt mast backwards to the bottom, and
fall the forks to the ground
4) Pull on the hand brake

Pull in the plug and close the hood.


Turn on the key switch

23

13. Instrument check (include battery


capacity and error diagnose)
Refer to instrument section.

14. Lifting lever,


attachment lever

tilting

and left chains are equal.


Adjust the chain tension: loosen the
lock nut (1) and adjust the chain by nut (2),
then locked nut (1).

lever,

Check the lifting lever, tilting lever and


attachment lever for looseness. Return
position well.

15.Mast
Check the mast and the forks to insure
that:
1) The fork does not have crack and
distortion.
Forks were installed
firmly and correctly.
2) Check the oil cylinder, oil pipes for
leakage.
3) Check the rotation of idler wheel
4) Check the mast for crack or
distortion
5) Lifting
lever,
tilting
lever,
attachment lever
Check the mast whether works normally,
whether have unusual sounds.

18. Check steering system


Turn the wheel right and left separately
to check steering system.

16. Mast lubrication


You should grease lubrication to the
orbit of mast on schedule base on
requirement.
Adjust the lubricate schedule according
to your working condition. Add times when
busy.
To coordinate forklift's operation,
grease lubrication to the guide pulley and in
outer upright mounting.

19. Turn signal, horn and other lamp


check
Make sure that the turn signal operates
properly by pull/push turn signal switch.
Make sure that the sound of horn is
properly by press the horn button
Check the other lamp and back-up
buzzer.

20. Battery maintenance


Refer to battery section.

17. Lift chain tension check


Raise the fork about 10-15 cm above
the ground vertically.
Push the middle of the chain with the
thumb. Make sure the tension for the right
24

21. Other
For instance, pay attention to abnormal
noise.

8.Driving and operation


! Warning

Before operating the truck, check all controls


and warning devices for proper operation. If
any damage or fault is found, dont operate
truck until corrected.

Driving
1 Open the cap, and insert the storage
battery plug, then close the cap.

backward.
6 Loosen the hand brake lever
Step the brake pedal and push the
hand brake lever to the front position.
Hold the steering wheel with your left
hand and attach your right hand.

Traveling
Step the accelerate pedal slowly, the
truck will travel forward or backward.

Decrease speed
Loosen the accelerate pedal slowly, the
truck will decelerate.
Warning:
Dont step the accelerate pedal and brake
2 Set the direction switch to neutral

pedal at the same time.

position
3 Turn on key switch
Hold the steering wheel with left
hand and turn on the key switch with right
hand.
4 Tilt back the mast
Control the lifting lever to set the
bottom of the fork 150-200mm above the
ground. Control the tilting lever to fully
tilt back the mast.
5 Control direction lever
Forward Push the direction lever
forward.
BackwardPull the direction lever

Caution:
Decelerate the truck in the situations
following:

turning;

close the goods or pallet;

close the deposit area;

enter a narrow passage

the condition of road surface is bad.

Turning
Unlike general passenger-cars, the
turning wheels are located at the rear of
the truck. This cause the counterbalance
swing out when turning.
Slow down the truck and turn the
steering wheel toward the side which you
are turning. The steering wheel should be
turned a bit earlier than as with the front
wheel steering car.
25

be handled.
!

Caution

Drive the truck slowly and control the

across both forks.

steering wheel carefully, assure there is

Insert forks into the pallet as far as

enough space to steer.

possible.

Stopping or parking

To raise loads from the ground

Slow down and press the brake pedal to


stop the truck.
Place the shift lever in neutral.
Pull up the parking brake lever.
Down the forks on the ground, tilt
mast forwards fully.
Place the key switch in OFF to shut
off the battery. Remove the key and
keep it.
Caution
Dont dismount from the moving truck,
never jump from the truck.
Dont parking the truck on the working
road.

Loading

The forks should be adjusted properly to


maintain the balance of load.

Place the truck right in front of the load to


26

The pallet should be evenly positioned

Firstly, lift the forks 5 to 10 cm off


the ground or floor and make sure loads lay
stably.
Then tilt the mast backwards fully
and lift forks up to 15 to 20 cm off ground
then start running.

When handling bulky loads which restrict


your vision, operate the truck in reverse
except when climbing grades.

Stacking load

When approaching the deposit area slow


down your truck.

Stop the truck right 30 cm far away from


the position where your load is to be

Caution:
Decelerate the truck in the situations
following:

turning;

close the goods or pallet;

close the deposit area;

enter a narrow passage

the condition of road surface is bad.

deposited.

Check the condition of the deposit area.

Un-stacking load

Tilt the mast forward until forks become

When approaching the area where the

to horizontal. Raise forks until they are a

load is to be retrieved, slow down your

little higher than the deposit position.

truck.

Move forward to place the load directly

Stop the truck 30 cm far from the load.

over the desired area and stop the truck.

Check the condition of the load.

Make sure your load is just over the

Tilt the mast forward until forks become

desired area. Slowly lower the load into

horizontal. Elevate forks up to the position

position. Make sure the load is securely

of the pallet.

stacked.

Make sure forks are positioned properly

Do necessary lift-tilt operations and then

to the pallet. Move forward slowly to

back away to make the forks leave loads.

insert forks into the pallet as far as

After making sure the forks leave the load,

possible.

lower the forks to the basic position (15 to

Caution

20 cm off the ground).

If the forks are hard to be fully inserted,

Tilt the mast backwards.

use

the

following

procedure:

Move

Warning!

forward and insert 3/4 of the forks. Raise

Never tilt the mast with loads upraised

the forks 5 to 10 cm and move backward

2m or more.
Dont leave or dismount from the truck
when the load is raised high.

10 to 20 cm with the pallet

on the

forks, and then fall the pallet to the stack.


Move forward again to insert the forks
fully.

Raise the forks 5 to 10 cm off the stack


27


Check all around the truck to insure that
the path of travel is unobstructed and back
away slowly.

Lower forks to a height of 15 to 20 cm


above the ground. Tilt the mast backward
fully and move to the desired area.

Check after operation


Clean and check the truck after operation:

Damage or leakage.

Add grease if necessarily.

Check the tire if it is damaged or inset


with foreign body.

Check the wheel hub nut if it is loose.

Check the height of electrolyte surface.


If you havent lift the fork to the max.
height in the day, you should lift it to the
max. height 23 times.

Caution

If you find any trouble, must repair it in


time.

Prohibit

operate

the

repairing it completely

28

forklift

before

9.Deposit

a. The stow-wood must be single and

Daily Depositing
Park your truck at the area appointed,
and block the wheels to prevent
accidental roll.
Make sure the shift lever on neutral
position.
Pull up the hand brake lever.
Shut off key switch and operate the lift
and tilt lever several times so that the
inner pressure in the hydraulic tube will
decrease.
Cramp out the electrical outlet.
Take out the key and deposit it in a safe
position.

On the basic of the daily depositing


should

do

these

checks

hard enough to support the truck.


b. Dont use a stow-wood higher than
300mm11.81 inch.
c. Lift the truck to the height of
placing on the stow-wood.
d. Place two same size stow-woods
under the left and right sides of the truck.
e. After supporting the truck with
stow-wood, swings the truck forward,
backward, left and right, check its safety.
Operate the forklift once a week,
and be required to lift the forks to its max.

Deposit the truck for a long time


you

Warning

and

maintenance additional:
Take out plug to prevent discharge and

height many times .


Check the proportion and the level
of electrolyte once a month
Charge the battery equally once a
month.

place in shade.
Brush antirust oil on those parts which
is exposed such as piston rod and axle

Working after long deposit

easy-rusted.

Get rid of antirust oil.

Cover breather hole and so on which


humidity easy to enter.
Cover the whole truck with mantle
All lubrication points add the oil
(grease).
Fill up the truck body and counter

Discharge the gear oil from driving


axle, decelerator box, and clean up the
internal of them. Add new oil.
Charge the battery then install it to
truck, and do not forget to connect the
down-lead.

weight with stow-wood to reduce


bearing of the two rear wheels.

Check

carefully

before

starting,

include start, advance, and back off,


turning, lift, fall, tilt and so on.

29

10.Storage battery

When electrolyte level is lowyou must


add distilled water to the level appointed.

Attention for using battery:


1. No firing

Warning

Explosive gas can be produced in the


internal of batterysmokingflame and
sparkle ,each can easily cause battery
explosion.

1. The shortage of the electrolyte will

cause the storage battery overheated,


even cause the system part of storage
battery and electric combustion.
2. Vitriol include in the electrolyte can
create burns, see doctor for emergency
treatment quickly if touch it un-carefully.

Splashing to the skin or eyeswash with

water 15~20 minutes;

Splashing to the clothes take it off


immediately

Careless drinkingInstead of plenty of


water and milk.

2. Protection against electric shock

3 Wearing glassesrubber overshoes and

Warning

Battery has high voltage and energy.

rubber glove.

Do not bring short circuit.

Do not approach tools to the two poles of


the batterywhich can cause the sparkle.

Remaining clean battery


Keep dryness and cleanness on the
surface

allowing

instead

battery

.the

poles

for

connection are also dry and clean.

3. Correct wire connection


Not

of

anode

of

cathodeotherwiseresulting in sparkle or

Operator must screw down the vent-cover


of battery.

burning or explosion.
Warning
4. Do not over-discharge

1. Do not use dry cloth or fiber cloth to

If you use the energy of battery till the

clean the batteryavoiding static to cause

forklift cant move, you will shorten its

the explosion.

working hours.

2. Pull out battery plug.

When the display of battery shows low

3. Cleaning with wet cloth.

capacity, please charge it quickly.

4. Wearing glassesrubber overshoes and


rubber glove.

5. Inspection for electrolyte

Forbidden to use the truck when the


electrolyte is shortage.

Inspection for electrolyte level every


week.
30

Check connections whether there is


loosen, fasten if any.
When wire or electrical outlet was
damagedplease do not charge.

Measure in summer
In summerwater in the electrolyte is
easy to evaporatethereforeelectrolyte
must often be inspected if electrolyte is
lowyou must add distilled water to the
level appointed.
Warning

Filling with distilled water beyond the


regulated range, Spilt electrolyte will
cause corrosion and electricity leakage.
Measure in winter
Keep effective and good surrounding for

4. Open forklift cover and battery lid when


chargingin order to release the explosive
gas .
5. In the progress of chargingelectrical
source switch and battery pin are not to
pull outotherwise will destroy pin and
electrical units. The normal procedure is
that:
press down the stopping button firstly
and then pick out the pin.

charging.
To

prevent dischargingwhen it is

cold pull out the battery pin.


Take measuressuch ascovering battery
for warmth.
Charge in time after work.

Attentions for charging


1. Please charge in the well-ventilated and
appointed site.
2. Mark no smoking when charging.
3. Inspect wire and electrical outlet.

Before chargingplease examine wire


and

electrical

damaged.

outlet

whether

been

Charger
1. The battery group is equipped with
JCD-35A-24 type automatic high frequency
computer to charge. The input power supply
is AC single-phase with 220V, input current
is not lower than 15A. The output voltage is
DC36V and its max. charge current is 35A.
The charging process is automatic, the detail
of using method please refer to the charger
operate manual.
2. Connect with earth wire when the charge
is used.
3. To replace fusemake sure that the input
and output circuits are disconnected.
4. Only professional person is allowed to
disassemble the cover to check and repair.
5. Do not rebuild or disassemble charger.
6. In high temperature season, pay attention
31

to prevent the charge from destroy caused


by high temperature. Stop the charge in
short time when it is necessary.
7. If a non-automatic charger is used, the
charge voltage, current and charge time
should be adjusted, and check the rate of
battery electrolyte timely, so as to make sure
that the charge of battery group is in good
condition. The adjust parameters please
refer to battery charging in the follow.
8. Do not continuously charge.

Continuously charge several batteries will


cause charger overheat even be damaged.
You can use the charger again after it has
been rested for an hour.
9. Select the charger according to batterys
voltage and capacity (refer to parameter
table)

Battery charging
1. There are two charge mode can be
adopted, including intelligent charging
and constant current charging. For the
first charging, adopt the constant current
charging.

All the batteries of the new truck are not


added electrolyte.
Electrolyte confect
Type
Parameter

D-500
D-420

D-700

Name

Specific gravity

1.265g/cm3

1.275g/cm3

Volume
ratio

3.1:1

2.6:1

Quality
Ratio

1.7:1

1.65:1

of acid

Water
and
vitriol

D-630B

Vitriol Ratio

1.835g/cm3

Vitriol standard

Suitable
for
GB4554-84 or special
for battery

32

Specification for distilled water:


Ingredient

Appearance
Dry residue
%
0
Resistively(25 C)cm
Fe
%
Cl
%
Mn
%
Organic
compound
(calculating oxygen)
%
Magnesium
oxide
+
calcium
oxide
%
Ammonium
%
Nitrate or nitrite
%

Index
No color crystal

0.005
7104
0.0004
0.0005
0.00002
0.0002

0.005

0.0008
0.0005

Confect course
Wear the blinkers, rubber overshoes
and rubber glove.
Please pay attention to add the acid
to water slowly, churning up at the
same time, make it mix equality.
CAUTION
Dont pour the water to the acid, in
order to avoid the temperature of liquid
surface turning high suddenly to cause
boiling and splashing out to hurt
someone.
When the electrolyte is cooled to
30, pour it into battery. It is proper
to pour the electrolyte 15-20mm
above the protection piece (without a
dobber) or 1mm distance between
dobber and cover (with a dobber).
Only when the temperature of the
electrolyte is below 35 (after
about 3-5 hours), can be first
charged.

4.5-5 times than rated capacity.


Caution
The time that is from pouring the
electrolyte into the battery to starting
first charging cant be exceeded 12
hours.
The specific charging cable should
be connected to charging machine.
Caution
Be sure to notice that the polarity
sign on the plug must keep comfortably
to the out specific charging end node.
When the charging cable is
connected to the storage batteries, please
pay attention to keeping comfortably on
the polarity sign. Otherwise maybe you
will damage your battery.

Inspect
The voltage value that the power
needed is the number of the serial
battery three times.
Battery

Battery voltage
V

1-1.8t

D-420

48

2-2.5t

D-630B

48

3t,3.5t

D-500

80

4-5t

D-700

80

Truck type

Inspect the charging machine.


Inspect every batterys polarity.
Charging ways
time, current as the
form
a. 1st phasemost of the single batterys
terminal voltage steps up to 2.4 V
b. 2nd phasethe electrode give off a
large number of bubbles, the voltage
and the specific gravity steadies 4
hours and the charging value gets to

Truck

Battery

type

type

Charging Charging current(A)


voltage

1st

2nd

(V)

phase

phase

1-1.8t

D-420

72

40

20

2-2.5t

D-630B

72

63

32

3t,3.5t

D-500

120

50

25

4-5t

D-700

120

70

35

35-45

35-45

Charging timeh

c. Adjusting the specific density and


height for the electrolyte

If the specific gravity is smaller, it will


be adjusted as follow: then take out
some electrode from the battery, pour
the compounded sulfuric acid that its
specific gravity is 1.400g/cm3.

If the specific gravity is larger, it will be


adjusted as follow: then take out some
electrode from the battery, pour some
distilled water, but you must keep the
electrode height accord with demand
d. After adjusting, you should keep
charging on 1 hour; make the density
of electrode even upper and under. At
this time we have finished the first
charging.
e. Close the pouring plug and clean the
battery surface acid, then you can use
it.
Caution
During the charging, the temperature
of electrolyte should not be exceeded
45 Otherwise you should low the
temperature. If the temperature do not
lowing, you should stop recharging
till the temperature drop down.
33

Daily charging

The battery that has been made the


first charging and used regular, then
charged again, is named daily charging.

Its way is almost same as the first


charging.

The recharging value is 1.2 times


than the last electric discharging. But the
electric-change for new batterys fore
five times should be 1.5 times than the
last electric discharging.

During any charge, the temperature


of electrode should not be exceeded
450C otherwise it should be taken
measures such as reducing artificially
charging current or lowing the
temperature. If the temperature doesnt
drop, you should stop charging, till the
temperature dropping down.
Charging

Charging current(A)

voltage

1st

2nd

(V)

phase

phase

D-420

72

55

25

2-2.5t

D-630B

72

88

44

3t,3.5t

D-500

120

70

35

4-5t

D-700

120

96

47

4-6

6-10

Truck

Battery

type

type

1-1.8t

occur disequilibrium among the voltage,


the density and the capacity.

Compared to most of the batteries ,


often finds that single batterys
proportion of voltage and electrolyte
rises slowly during the course of charge
and during the course of discharge, its
batterys proportion of voltage and
electrolyte declines faster than most of
other batteries.

Make equilibrium charge in the


following case
a. discharge voltage often drop down
ending voltage
b. discharge current is often larger
c. Not charge in time after discharge
d. The electrolyte is mixed with
impurity with a little harm.
e. It often be charged deficient or has
not been used for a long time
f. After taking out the battery group
for checking or cleaning settling.

Adopt intelligent charging for the


daily charging. The first five charging
should using Equilibrium Charge
according to the intelligent charger
operate manual.

The method of Equilibrium Charge


Firstly, charge the battery normally,
and then rest for 1 hour after the
end of charge.
Charge it again with the current
belongs to the second normally
charge until the electrolyte gives
off a large number of bubbles, then
stop charging for 1 hour.

Repeat it several times as


mentioned above until the voltage and
the density keep invariable and the
battery gives off a large number of
bubbles immediately when charge
again.

Equilibrium Charge

During using of the battery, it often

Complementarity Charge
If one days work cannot be fulfilled

Charging timeh

34

with one charge, carry out opportunity


charge during breaks.

When the temperature of circumstance


is low, carry out opportunity charge.

5. Use the proper tools to pull up the


battery

Charge for long-term storage


Carry out equilibrium charge before
storing.
Carry out equilibrium charge once
every 15 to 30 days during the storage
period.
The special orders storage battery

The weight and dimension of Battery


Model

carries on the charge according to


"Accumulator Instruction for use".

Battery replacement
Caution
Be sure that the voltage, the
capability, the size and the weight of
the new battery are according with the
forklift truck before replacing the
battery.
Forbid to use battery with
different voltage or capacity or weight
except being promised by factory.

1-1.8t
Weight (kg)
Min.

700

Max.

900

Dimension(mm)

Model
Weight (kg)

2-2.5 t

Min.

800

Max.

1000

Dimension(mm)

5701028780

Model
Weight (kg)

Replacement step
1. Stop the forklift truck on the plain
ground pull up the hand brake lever.
2. Open the hood cover.
3. Disconnect the battery plug.

465980780

3 -3.5t

Min.

1200

Max.

1500

Dimension(mm)

7101028780

Model
Weight (kg)

4-5 t

Min.

1900

Max.

2200

Dimension(mm)

8001128780

4. Remove the lock pin.


35

Caution

The box must be pulled up with


using 4 holes of the pothook at the same
time. It is not allowed to pull up with
only two holes. Otherwise, the
asymmetric power will cause the battery
damaged.

The steering wheel and other


equipment should not be bumped, avoid
being damaged when pulling up the
battery box.
6. After exchange the full electricity of
battery, plug into the lock pin, shut to
the hood cover, and plug into the pin of
the battery hard.
The waste electrolyte of the
replaced battery should be dealt
according to environment and protection
law rather than reject at will.
The proportion and level of electrolyte
Caution
If the level of the electrolyte is low,
using the battery will cause the
battery over-heat and shorten the
batterys life.
1 Inspect electrolyte
The battery without a dobber
It is proper to pour the electrolyte
15-20mm above the electrode plate.
The battery with a dobber
Depending on the dobber of the
winded cover, and read the level
position of the electrolyte.

36

2 Replenish the distilled water


Wear the blinkers, rubber overshoes
and rubber glove.
Using the measuring cylinder to
take out the distilled water with a
certain quantity.
Open the battery cover for every
battery cell.
Imbibe distilled water with injector
and then supply it into the battery.
The battery with a dobber
When the red dobber rises, the
white line is appeared, please stop to
replenish the distilled water.

The battery without a dobber


When the electrolyte is above
15-20mm of the electrode plate, stop
replenishing the distilled water.
After replenishing the distilled water,
close the pouring plug and battery
cover.
Using the damp cloth to clean the
surface of every battery cell.
CAUTION
It is not permitted to overrun the
appointed tiptop level when replenishing
the distilled water. Adding it too much
will result in leakage of electrolyte, and
it will damage the truck when charging
and discharging.
Draw it out with injector if adding
it too much.

3 Read the specific gravity


1 The specific gravity of the
electrolyte should change follow the
temperature.
Use thermometer to measure the
temperature of electrolyte.
Put the straw of densimeter into
electrolyte uprightly, extrude rubber tube
with hand and the electrolyte will be
sucked into the glasses tube and then the
floater of the densimeter will float.
Numerate the reading of the
densimeter.
NoticeThe dobber of densimeter must
rise uprightly without depending on the
glass pipe.

2Specific gravity measure


Using the densimeter to measure the
specific gravity.

3Conversion of the specific gravity


The specific gravity at the
standard temperature of 300C should be
converted as follow
D30= Dt + 0.0007(t - 30)
Where D30 the specific gravity at
the standard temperature of 300C
Dt the specific gravity at
the temperature of t0C.
t the temperature of the
distilled water during convert.
The specific gravity that was refered
in this book is measured all at the
temperature of 30.
37

The Automatic Watering System of the Forklift Battery


1. Automatic Watering System
Makeup of the Automatic Watering
System

Automatic Watering Plug


End Plug
Floater
T-piece & L-piece
Flow Indicatorwith filter
6mm, 8mm ,10mm watering pipe
Male & Female couplings (Kv10 and KV6, etc.)
Water Tank

2. Application Specification & Installation


During the period of development and long-term practical
usage, the leak tightness of automatic watering system has received
complete recognition.
But when you use it, you need to keep the automatic watering
system clean and there cant be any filth on the surface.
How to properly install the automatic watering system
Our automatic watering system is easy to operate, no need to finish
watering the electrolyte in the storage battery by hand,
time saving and labor saving, besides, it can extend the service life.
How to correctly install the water tank, choose proper floaters,
how to confirm the specification & quantity of the installed
accessories according to different types of battery, including correct
application rules for automatic watering plug, watering pipe, T/Lpieces and male/female couplings as well as the cleaning of the flow
indicator. We will give you a brief introduction for the above items
as follows:
Meanwhile we will offer detailed installation drawings to ensure that the clients can
correctly install and standardize the operation.
battery
spec.

Watering head
T-piece

T-piece
Flow
6-10-6 indicator
filter

6mm
Waterin
g pipe

10mm
Watering
pipe

end
plug

Male/female
K10

Water tank
specification

24V

12 pcs

1 pcs

1 pcs

3m

5m

2pcs

1pcs

30L 1pcs

48V

24 pcs

1 pcs

1 pcs

5m

5m

2pcs

1pcs

30L 1pcs

80V

40 pcs

1 pcs

1 pcs

10m

5m

2pcs

1pcs

60L 1pcs

38

Automatic Watering System of Forklift Storage Battery-48V battery group

Floater
How to choose proper floaters correctly
According to different storage battery, we have five kinds of floaters for you to choose. In
order to achieve our expected standard and completely reflect the effectiveness of the
automatic watering system, the most important thing is to choose proper floaters.
At present our company can offer a rule for the client to make judgment and choose the type
of floater. (see diagram)
The diagram the installation way of the floaters

T =T1-(5~17mm)

39

T approaching
Float

47

50.5

58

61

72

13

16.5

24

27

38

Watering Pipe

Our company offers watering pipes of different types and the clients can choose what
they need according to the specification of the battery.
The watering pipe must be perfectly sealed with T-piece and L-piece.

Notes during the filling process:


1In order to ensure a safe watering process, we hereby recommend you to use flow
indicator (with filter), the flow indicator with filter can not only timely indicate whether it
finishes watering, but also avoid unclean impurities entering the battery to result interruption.
2The watering pressure should be within the range of 0.2-0.6, no less than 200mbar
3Youd better conduct watering within the specified periods, because frequent filling
will lead to overflowing for too much water, which will do great damage to the storage
battery.
NoteFilling after finishing charging is the best ideal state, besides, do not filling before
charging.

Cleaning
During the period of development and long-term practical application, the leak tightness
of automatic watering system has been completely approved.
When you use it, you must pay much attention to keep the automatic watering system
clean. No filth remaining on the surface.
The users should regularly clean the watering plug for the plug is a kind of plastic good.
Clean the surface directly with tap water and no need to use other detergent.
Structure Diagram of the Watering Plug

open

40

close

Characteristics of the Automatic Watering System

No need to water by hand, labor saving.


No malfunction factor leading to damage the battery.
Easy & safe operation.
Ensure a precise electrolyte level in every battery cell.
Prevent leakage when watering.
Effectively avoid the acid liquid to erode the storage battery and the electrolytic bath.
Extend the service life of the battery.
Environment protection.
Save energy.

Function Introduction
Function of the automatic watering system: the floater of the automatic watering plug can
reach correct water level, when the level rises in the cell, the pressure closes the valves and
prevents further water entering the cell. When the system finishes watering, the flow indicator
will stop running and you can see the water-level indicator clearly through the top of the
watering system.
Besides, the material of floater can avoid damage and ineffectiveness.
As for the structure of automatic watering system, there is a terraced step, when the
electrolyte gas rises to the watering plug, the terraced part can prevent the leakage of the
electrolyte gas as well as quickly cool the electrolyte gas to make them go back to the storage
battery in time.

41

11.Maintenance summarization
The fork lift truck needs inspection and maintenance periodically so as to make it in
good working condition.
Inspection and maintenance are usually ignored; youd better find the problems and
solve it in time.
Use the orthodoxy spare part of ZHEJIANG HANGCHA ENGINEERING
MACHINERY CO., LTD.
Dont use different oil when changing or adding oil.
Forbid to repair the fork lift truck if you havent been trained.
Dont rave about oil and electrolyte used at will, and carry on handling according to the
local environmental protection laws and regulations.
Maintenance on schedule.
After you make maintenance, youd better make a record.

Notice

No smoking.

You should shut off key switch and pull off the plug before service.except some trouble
shooting.

Clean the electric part with compress air, do not with water.

Do not place your hands, feet or any part of body into the gap between the mast and
instrument.

The weight and dimension of the counterweight:


Tonnage

1-1.5t
426

Weight (kg)
Dimension
(mmmmmm)

1.8t
600

Weight (kg)
Dimension
(mmmmmm)

743

770

2941070912

Tonnage

2-2.5t

3291070912

3t

3.5t

1175

1495

3821134940

4621134940

1000

3821134940

4-4.5t
1358

5t
1522

1918

4651280978

4651280978

The dimension of mast


Model
Dimension
(mmmmmm)
Model
Dimension
(mmmmmm)

42

1-1.5t

2-2.5t

3t

3.5t

18951072480

19151118555

19551120580

19551120585

3.5t

4-4.5t

5t

19551120585

22451350550

23951350555

Preventive maintenance schedule


Check, revise, adjust

Battery
Checking
item

Service required

Daily
(8 hrs)

Tools

Monthly Trimonthly
(166hrs)
(500 hrs)

Semiannually
(1000 hrs)

Electrolyte level

Eyeballing

Electrolyte proportion

Densimeter

Battery quantity
Terminal
looseness
Looseness of connecting
wire
Storage

weekly
(40 hrs)

Replace

cleanness of the battery

battery

surface
If there are tools on the
battery.
The tightness and
smoothness of

air

cap

Far away from firing

Controller
Checking Item

Service Required
Check connector
for worn
Check contactor
for running
Check

Tools

Daily
(8 hrs)

weekly
(40 hrs)

Monthly
(166hrs)

Trimonthly
(500 hrs)

Semiannually
(1000 hrs)

micro

move switch for


running
Controller

Check

the

connection
among

motor,

battery

and

power unit.
Check
controller

the
error

diagnose system

First time 2
years

43

Motor
Checking Item

Service Required

Tools

Daily
(8 hrs)

weekly
(40 hrs)

Monthly
(166hrs)

Trimonthly
(500 hrs)

Semiannually
(1000 hrs)

Clean the foreign


body on the
motor
Clean or replace

the bearing
Check

the

carbon brush and


commutater
Motor

worn,

for

whether

spring is normal
Whether

the

connection

is

correct and firm.


Brush

carbon

powder on shift
plate and shift
device.

Driving system
Checking

Daily
(8 hrs)

weekly
(40 hrs)

Monthly
(166hrs)

Trimonthly
(500 hrs)

Semiannually
(1000 hrs)

Check for noise

Check
leaks

Service required
Item

for

Tools

oil

Change oil
heck wheel
hub bolts for
tighten
torque

Check wheel hub


bearing
for
loosenessnoise

Clean
and
replace grease
Check
wheel
hub bolts for
tighten torque

44

Wheels (Front, Rear Wheels)


Checking
Item

Tyre

Service required

Tools

Check for charge


Barometer
pressure
Check
for
abrasion cracks
or damage
Check for spikes
stones or foreign
matter
Check the wheel
hub for damage
Check the split Test
body
wheel hammer
hub-bolts
for
looseness

Daily
(8 hrs)

weekly
(40 hrs)

Monthly
(166hrs)

Trimonthly
(500 hrs)

Semiannually
(1000 hrs)

Steering System
Checking Item

Steering wheel

Steering Gear
box and valve

Steering axle

Steering
cylinder

Service required
Check for
clearance
Check for radial
looseness
Check for axial
looseness
Check for
operation
Check mounting
bolts for
looseness
Check king pins
for looseness or
damage
Check for
deflection,
deformation ,cra
cks or damage
Check for fixing
condition
Check for
operation
Check for oil
leaks
Check for
looseness when
fixing or hinging

Tools

Daily
(8 hrs)

weekly
(40 hrs)

Monthly
(166hrs)

Trimonthly
(500 hrs)

Semiannually
(1000 hrs)

Test
hammer

45

Brake system
Checking
item

Tools

Daily
(8 hrs)

weekly
(40 hrs)

Scale

Check for pedal travel

Check for operation

Check for air mixed in


brake piping

Check for lever is securely


locked and has sufficient
lever stroke

Check for operation

Check for operation

Check connections for


looseness

Service required
Check for free travel

Brake
pedal

Parking
brake

Rod,
Cable,
etc

Monthly Trimonthly Semiannually


(166hrs) (500 hrs)
(1000 hrs)

Check decelerator

connector lug for


abrasion
Hoses
and Pipes

Brake
master
cylinder
and
wheel
cylinder

Check for damage, leakage


or collapse

Check connection or
clamping parts for looseness

Check for leakage

Check for fluid level,


Change brake fluid

Check master cylinder and


wheel cylinder for operation

Check master cylinder and


wheel cylinders for fluid
leaks or damage

Check master cylinder


piston cup, and check valve
for wear or damage change

46

Hydraulic system
Checking
item

Service required

Tools

Check for oil level,


Change oil
Hydraulic
reservoir

Control
lever

Control
valve

Hydraulic
Pump

weekly
(40 hrs)

Monthly
(166hrs)

Trimonthly
(500 hrs)

Semiannually
(1000 hrs)

Clean suction strainer

Clean foreign matter

Check levers for


looseness

Check for operation

Check for oil leak

Check relief valve


and tilt lock valve
for operation
Measure relief
pressure

Hose,
Piping Hose
Reel &
Swivel Joint

Daily
(8 hrs)

Oil
press
gauge

Check for oil leak,


looseness, collapse,
deformation and
damage

1-2 years

Replace hoses.
Check hydraulic
pump for oil leak or
noise
Check pump drive
gear for wear

47

Lifting system
Checking
item

Service required

Tools

Check chain for tension, damage or rust

Chains &
Sheave

Attachment

Daily
(8 hrs)

weekly
(40 hrs)

Monthly Trimonthly Semiannually


(166hrs) (500 hrs)
(1000 hrs)

Add lubrication for chains

Check connection of chain anchor pin and


chain for looseness

Check sheaves for deformation or damage

Check sheave bearings for looseness

Perform general inspection

Check piston rod, rod screw and connection


for looseness deformation or damage

Test
hammer

Check cylinders for operation

tilting

Check for oil leak

cylinder

Check pins and cylinder bushings for wear or


damage

Check forks for damage,


wear

Check outer and inner masts for defective


weld, cracks or damage

Check for defective weld, cracks or damage of


lift bracket

Check roller bearings for looseness

Lifting
cylinder and

Fork

deformation or

Check for stopper pins for damage or wear


Check fork base and hook welding for
defective cracks or wear
Check weld between cross members with
outer and inner masts for defective, cracks or
damage
Check tilt cylinder bracket and mast for
defective weld ,cracks or damage

Mast &
Lift
Bracket

Check mast support bushings for wear or


damage

Check mast support cap bolts for looseness

Test
hammer

Check lift cylinder tall bolts, piston rod head


bolts, U-bolts, and piston head guide bolts for
looseness

Test
hammer

Check rollers, roller pins and welded parts for


cracks or damage

48

(for 1st
time
only

(for 1st
time
only

Others
Checking item

Overhead Guard
& Load Backrest

Turn signal

Horn

Light & Lamps

Buck-up Buzzer
Meters

wire

Service required

Tools

Check for tight


installation

Test

Daily
(8 hrs)

weekly
(40 hrs)

Monthly
(166hrs)

Trimonthly
(500 hrs)

Semiannually
(1000 hrs)

hammer

Check for
deformation, cracks
or damage
Check for proper
operation and tight
installation
Check for proper
operation and tight
installation
Check for proper
operation and tight
installation
Check for proper
operation and tight
installation
Check meters for
proper operation
Wire damage or
looseness
Looseness of
Electric circuit Joint

Replace the key safe parts termly


Some parts should be checked periodically to detect the damage, for improving the
safety, users should replace the parts periodically which are listed in the table as follows.
If the parts are abnormal before the replacing time is coming, it should be replaced
immediately.
Key safe parts description

Term of using (year)

Brake hose or tube

1~2

Hydraulic hose for lifting system

1~2

Lifting chain

2~4

High-pressure hose hose for hydraulic system


Brake oil cup

2
2~4

Brake master cylinderbrake slave cylinder cover and dust sleeve

Inner hermeticrubber matter

49

Table for bolts tight torque


Unit N
m
Bolts
diameter

Grade
4.6

5.6

6.6

8.8

45

57

68

912

1012

1215

1418

2229

10

2025

2531

2939

4458

12

3544

4454

4964

76107

14

5469

6988

8398

121162

16

88108

108137

127157

189252

18

118147

147186

176216

260347

20

167206

206265

245314

369492

22

225284

284343

343431

502669

24

294370

370441

441539

638850

27

441519

539686

637784

9331244

Note:
Use entirely 8.8 grade bolt in the important joint position.
Bolts grade can be found in the head of the bolt, if it cant be found, the grade is 8.8.

Table for oil used in the truck


Name

Hydraulic oil

Gear oil
Brake Fluid

50

capabilityL

Remark

22-25

1-1.8t

25-35

2-3.5t

40-45

4-5t

GL-585W/90

Use in driving axle and


gear-box

(Choice) HZY3 or DOT3

1.5

Trademark, code name


Normally: L HM32
cold environment :L-HV32

Industrial Vaseline

2#

Lubrication grease

Automobile general lithium


base lubricant

Electrode of storage battery

12.Trucks convey, lifting, towing


Convey

The Fork Lift Truck is designed for material handling only, It is inappropriate for
long-distance transportation. If needed, the Fork Lift Truck must be transported by ship, train
or lorry, of 5T loading. Use a lifting pallet to hoist the truck.
Use the steel wire ropes to tie the holes in the two side of the outside masts beam and
the rear of trucks body, and then use the lifting device to hoist the truck.
Hoist the truck

Use the steel wire ropes to tie the holes in the two side of the outside masts beam and
the hook of the counter balance, and then use the lifting device to hoist the truck. The steel
wire rope attach to the counterweight should through the safeguard gap, and make the
safeguard not be distorted.
Warning

When hoist the truck, dont coil the overhead guard with the steel wire.

The steel wire ropes and the lifting device must be very firm to support the truck because
the truck is very heavy.

Dont lift the truck by hoist the overhead guard.

When lifting the truck, dont take yourself below the truck.
Towing

The towing rod on the bottom of the counter balance is used to pull and drag the truck.

Loosen the brake lever and turn off key switch.

Set switch lever to neutral position


Warning
a. Dont tie the steel wire ropes on the unfixed position.
b. Dont carry a load to steel wire ropes suddenly.
c. The truck would be damaged if you tow it with the electric lock working.

51

13.Parameters
Parameters of CPD10/15/18J
NO.

Item

Units

CPD10J

CPD15J

CPD18J

Ratio capacity

kg

1000

1500

1800

Load centre

mm

500

500

500

Max.

mm

3000

3000

3000

Lifting height
Free

mm

135

135

135

Fully loaded

mm/s

290

290

270

front/rear

5/10

5/10

5/10

Fully loaded

mm/s

12

12

12

Fully loaded

13

13

13

Min.

mm

1780

1780

1815

Min.

mm

110

110

110

Max.

2.5

2.5

2.5

mm

2080

2080

2115

mm

1090

1090

1138

mm

2075

2075

2075

Include
battery

kg

2770

2940

3090

Standard

V/Ah

48/420

48/420

48/420

Optional

V/Ah

48/480

48/480

48/480

Driven

kW

Lifting

kW

7.8

7.8

7.8

MOSFET

MOSFET

MOSFET

Tow

Danaher

Danaher

Danaher

Lifting

Danaher

Danaher

Danaher

Front 2

6.00-9/2

6.00-9/2

218-9/2

Rear 2

5.00-8/2

5.00-8/2

5.00-8/2

Max.
velocity

Tilting angle

6
7
8
9
10

11

Lifting

Max. Traveling
velocity
Max. Crawling
slope
Turning radius
Ground
clearance
Stopping
distance

Overall Dimension

12

Weight (self)

13

Battery

14

Motor

Type
15

Controller
Manufacturer

16

52

Tyre

Parameters of CPD10/15/18JC1
NO.

Item

Unit

CPD10JC1

CPD15J C1

CPD18J C1

Ratio capacity

kg

1000

1500

1800

Load centre

mm

500

500

500

Max.

mm

3000

3000

3000

Lifting height
Free

mm

135

135

135

Fully loaded

mm/s

290

290

270

front/rear

5/10

5/10

5/10

Fully loaded

mm/s

12

12

12

Fully loaded

13

13

13

Min.

mm

2090

1780

1815

Min.

mm

110

110

110

Max.

2.5

2.5

2.5

mm

2080

2115

mm

1090

1090

1138

mm

2075

2075

2075

Include
battery

kg

2940

3090

Standard

V/Ah

48/420

48/420

48/420

Optional

V/Ah

48/480

48/480

Driven

kW

6.8

6.8

6.8

Lifting

kW

8.2

8.2

8.2

MOSFET

MOSFET

MOSFET

Tow

CURTIS

CURTIS

CURTIS

Lifting

CURTIS

CURTIS

CURTIS

Front 2

6.00-9/2

6.00-9/2

218/2

Rear 2

5.00-8/2

5.00-8/2

5.00-8/2

Max.
velocity

Tilting angle

6
7
8
9
10

11

Lifting

Max. Traveling
velocity
Max. Crawling
slope
Turning radius
Ground
clearance
Stopping
distance

Overall Dimension

12

Weight (self)

13

Battery

14

Motor

Type
15

48/480

Controller
Manufacturer

16

Tyre

53

Parameters of CPD10/15/18JD1
NO.

Item

Unit

CPD10JD1

CPD15JD1

CPD18JD1

Ratio capacity

kg

1000

1500

1800

Load centre

mm

500

500

500

Max.

mm

3000

3000

3000

Lifting height
Free

mm

135

135

135

Fully loaded

mm/s

290

290

270

front/rear

5/10

5/10

5/10

Fully loaded

mm/s

12

12

12

Fully loaded

13

13

13

Min.

mm

2090

1780

1815

Min.

mm

110

110

110

Max.

2.5

2.5

2.5

mm

2080

2115

mm

1090

1090

1138

mm

2075

2075

2075

Include
battery

kg

2940

3090

Standard

V/Ah

48/420

48/420

48/420

Optional

V/Ah

48/480

48/480

48/480

Driven

kW

6.8

Lifting

kW

7.8

7.8

8.2

MOSFET

MOSFET

MOSFET

Tow

Danaher

Danaher

CURTIS

Lifting

Danaher

Danaher

CURTIS

Front 2

6.00-9/2

6.00-9/2

218/2

Rear 2

5.00-8/2

5.00-8/2

5.00-8/2

Max.
velocity

Tilting angle

6
7
8
9
10

11

Lifting

Max. Traveling
velocity
Max. Crawling
slope
Turning radius
Ground
clearance
Stopping
distance

Overall Dimension

12

Weight (self)

13

Battery

14

Motor

Type
15

Controller
Manufacturer

16

54

Tyre

Parameters of CPD20/25/30J
No.

Item

Unit

CPD20J

CPD25J

CPD30J

Ratio capacity

kg

2000

2500

3000

Load centre

mm

500

500

500

Max.

mm

3000

3000

3000

Lifting height
Free

mm

140

145

145

mm/s

250

250

230

5/10

5/10

5/10

mm/s

12

12

13

13

10

13

Max.
velocity

Tilting angle

Max.
velocity

Max. Crawling slope

Turning radius

Min.

mm

2090

2090

2230

Ground clearance

Min.

mm

120

120

120

10

Stopping distance

Max.

2.5

2.5

2.5

mm

2275

2325

2490

mm

1265

1265

1240

mm

2100

2100

2100

Include
battery

kg

3800

4020

5050

Standar
d

V/Ah

48/630

48/630

80/500

Optional

V/Ah

48/700

48/700

Driven

kW

10

Lifting

kW

8.6

8.6

10

MOSFET

MOSFET

MOSFET

Tow

CURTIS

CURTIS

CURTIS

Liftin
g

CURTIS

CURTIS

CURTIS

Front 2

239-10/2

239-10/2

239-10/2

Rear 2

187-8/2

187-8/2

187-8/2

11

12

13

14

Lifting

Traveling

Overall Dimension

Weight (self)

Battery

Fully
loaded
front/rea
r
Fully
loaded
Fully
loaded

Motor

Type
15

16

Controller

Manufact
urer

Tyre

55

Parameters of CPD20/25/30/35JC1
No.

Item

Unit

CPD20JC1

CPD25JC1

CPD30JC1

CPD35JC1

Ratio capacity

kg

2000

2500

3000

3500

Load centre

mm

500

500

500

500

Max.

mm

3000

3000

3000

3000

Lifting height
Free

mm

140

145

145

145

mm/s

250

250

230

210

5/10

5/10

5/10

5/10

mm/s

12

12

13

13

13

10

13

12

Max.
velocity

Tilting angle

Max.
velocity

Max. Crawling slope

Turning radius

Min.

mm

2090

2090

2230

2310

Ground clearance

Min.

mm

120

120

120

120

10

Stopping distance

Max.

2.5

2.5

2.5

2.5

mm

2275

2325

2490

2570

mm

1265

1265

1265

1302

mm

2100

2100

2100

2100

Include
battery

kg

3800

4020

5050

5400

Standar
d

V/Ah

48/630

48/630

80/500

80/500

Optional

V/Ah

48/700

48/700

Driven

kW

9.1

9.1

11.75

11.75

Lifting

kW

8.6

8.6

10

10

MOSFET

MOSFET

MOSFET

MOSFET

Tow

CURTIS

CURTIS

CURTIS

CURTIS

Liftin
g

CURTIS

CURTIS

CURTIS

CURTIS

Front 2

239-10/2

239-10/2

239-10/2

2310-12/2

Rear 2

187-8/2

187-8/2

187-8/2

187-8/2

11

Lifting

Traveling

Overall Dimension

12

Weight (self)

13

Battery

14

Fully
loaded
front/rea
r
Fully
loaded
Fully
loaded

Motor

Type
15

Controller

16

Manufact
urer

Tyre

56

Parameters of CPD20/25/30/35JC2
No.

Item

Unit

CPD20JC2

CPD25JC2

CPD30JC2

CPD35JC2

Ratio capacity

kg

2500

2500

3000

3500

Load centre

mm

500

500

500

500

Max.

mm

3000

3000

3000

3000

Lifting height
Free

mm

145

145

145

145

mm/s

250

250

230

210

5/10

5/10

5/10

5/10

mm/s

12

12

13

13

10

10

13

12

Max.
velocity

Tilting angle

Max.
velocity

Max. Crawling slope

Turning radius

Min.

mm

2090

2090

2230

2310

Ground clearance

Min.

mm

120

120

120

120

10

Stopping distance

Max.

2.5

2.5

2.5

2.5

mm

2325

2325

2490

2570

mm

1265

1265

1265

1302

mm

2100

2100

2100

2100

Include
battery

kg

4020

4020

5050

5400

Standar
d

V/Ah

48/630

48/630

80/500

80/500

Optional

V/Ah

48/700

48/700

Driven

kW

9.1

9.1

11.75

11.75

Lifting

kW

8.6

8.6

MOSFET

MOSFET

MOSFET

MOSFET

Tow

CURTIS

CURTIS

CURTIS

CURTIS

Liftin
g

CURTIS

CURTIS

CURTIS

CURTIS

Front 2

239-10/2

239-10/2

239-10/2

2310-12/2

Rear 2

187-8/2

187-8/2

187-8/2

187-8/2

11

12

13

14

Lifting

Traveling

Overall Dimension

Weight (self)

Battery

Fully
loaded
front/rea
r
Fully
loaded
Fully
loaded

Motor

Type
15

16

Controller

Manufact
urer

1
0

Tyre

57

Parameters of CPD20/25/30/ 35J D1


No.

Item

Unit

CPD20J
D1

CPD25J D1

CPD30J D1

CPD35J D1

Ratio capacity

kg

2000

2500

3000

3500

Load centre

mm

500

500

500

500

Max.

mm

3000

3000

3000

3000

Lifting height
Free

mm

140

145

145

145

mm/s

250

250

250

210

5/10

5/10

5/10

5/10

mm/s

14

12

14.5

13

14

13

15

11

Max.
velocity

Tilting angle

Max.
velocity

Max. Crawling slope

Turning radius

Min.

mm

2040

2090

2230

2310

Ground clearance

Min.

mm

120

120

120

120

10

Stopping distance

Max.

2.5

2.5

2.5

2.5

mm

2275

2325

2490

2570

mm

1265

1265

1265

1302

mm

2100

2100

2100

2100

Include
battery

kg

3800

4180

5050

5460

Standar
d

V/Ah

48/630

48/630

80/500

80/500

Optional

V/Ah

48/700

48/700

Driven

kW

10.5

10.5

10.6

10.6

Lifting

kW

11

11

12.8

12.8

MOSFET

MOSFET

MOSFET

MOSFET

Tow

Danaher

Danaher

Danaher

Danaher

Liftin
g

Danaher

Danaher

Danaher

Danaher

Front 2

239-10/2

239-10/2

239-10/2

2310-12/2

Rear 2

187-8/2

187-8/2

187-8/2

187-8/2

11

Lifting

Traveling

Overall Dimension

12

Weight (self)

13

Battery

14

Fully
loaded
front/rea
r
Fully
loaded
Fully
loaded

Motor

Type
15

Controller

16

Manufact
urer

Tyre

58

Parameter of CPD40/45/50J D1
No.

Item

Unit

CPD40J D1

CPD45J D1

CPD50J D1

Ratio capacity

kg

4000

4500

5000

Load centre

mm

500

500

500

Max.

mm

3000

3000

3000

Lifting height
Free

mm

145

150

150

mm/s

260

260

230

6/12

6/12

6/12

mm/s

13.5

13.5

13

14

Max.
velocity

Tilting angle

Max.
velocity

Max. Crawling slope

Turning radius

Min.

mm

2650

2650

2650

Ground clearance

Min.

mm

219

219

226

10

Stopping distance

Max.

2.5

2.5

2.5

mm

3015

3015

3015

mm

1380

1380

1380

mm

2280

2280

2280

Include
battery

kg

6550

6800

7250

Standar
d

V/Ah

80/700

80/700

80/700

Optional

V/Ah

Driven

kW

16.6

16.6

16.6

Lifting

kW

25.4

25.4

25.4

11

12

13

14

15

16

Lifting

Traveling

Overall Dimension

Weight (self)

Battery

Fully
loaded
front/rea
r
Fully
loaded
Fully
loaded

14

13

Motor

Controller

Type

MOSFET

MOSFET

MOSFET

Manufact
urer

Danaher

Danaher

Danaher

Front 2

250-15-16/2

250-15-16/2

250-15-16/2

Rear 2

7.00-12-12/2

7.00-12-12/2

7.00-12-12/2

Tyre

59

Parameter of CPD40/45/50J C2
No.

Unit

CPD40J C2

CPD45J C2

CPD50J C2

Ratio capacity

kg

4000

4500

5000

Load centre

mm

500

500

500

Max.

mm

3000

3000

3000

Lifting height
Free

mm

145

150

150

mm/s

260

260

260

6/12

6/12

6/12

mm/s

13.5

13.5

13

14

Max.
velocity

Tilting angle

Max.
velocity

Max. Crawling slope

Turning radius

Min.

mm

2650

2650

2650

Ground clearance

Min.

mm

219

219

226

10

Stopping distance

Max.

2.5

2.5

2.5

mm

3015

3015

3015

mm

1380

1380

1380

mm

2310

2310

2310

Include
battery

kg

6550

6800

7200

Standar
d

V/Ah

80/700

80/700

80/700

Optional

V/Ah

Driven

kW

Lifting

kW

16.6@3100r
pm
25.4@1620
rpm

16.6@3100r
pm
25.4@1620
rpm

16.6@3100rp
m
25.4@1620
rpm

Type

MOSFET

MOSFET

MOSFET

Manufact
urer

CURTIS

CURTIS

CURTIS

Front 2

250-15-16/2

250-15-16/2

250-15-16/2

Rear 2

7.00-12-12/2

7.00-12-12/2

7.00-12-12/2

11

12

13

14

15

16

60

Item

Lifting

Traveling

Overall Dimension

Weight (self)

Battery

Fully
loaded
front/rea
r
Fully
loaded
Fully
loaded

Motor

Controller

14

13

Tyre

14.Scutcheon
There are many scutcheons and labels on the different position of the truck.

61

STOP

EME

RG

EN CY

USE SPECIFIED FUSES ONLY

62

1.tonnage label

2. typeface label

3. ac label

4. danger label

5.danger label

6. danger label

7. CE label

8. hanging label

9. danger label

10. danger label

11. load curve scutcheon

12. warning label

13. product nameplate

14. hydraulic oil label

15.tight point label

16.hand brake label

17. urgent stop label

18. noise label

19.fuse label

1tonnage label

The word 30means the rated load is 3.0


ton. If the lifting height increases or adds
attachment, the rated load will decrease.
2typeface label

3ac labelonly fro ac motor

The inner and outer mast, fork frame are


all lifting slip parts. The hands are not
allowed to reach the place between the
inner and outer mast.
If the part needs to be check or repaired,
the inspection and repair should be carried
out after shutting off the power. Nobody
is allowed on the truck, and the man
outside the truck is not allowed to operate
the truck, preventing from accident caused
by miss operating the mast handle.
6danger labeladhibit to the outside of
mast
No allowed to stand on or down the mast,
or it is dangerous to your life.

4danger label NO entering label

Warning: It is dangerous of your life. If


the body is clamped among the mast ,
instrument frame and shield cabane, your
life will be dangerous. If the part needs to
be check or repaired, the inspection and
repair should be carried out after shutting
off the power. Nobody is allowed on the
truck, and the man outside the truck is not
allowed to operate the truck, preventing
from accident caused by miss operating the
mast handle.

7CE labelonly for truck exporting to


Europe or option

8hang labelIt shows the hang position


and method. When hanging, the rope
should not touch the light and even destroy
it.
LIFT METHOD

5danger label

63

910 danger label

13product nameplate
WARNING

14hydraulic oil label


11load curve scutcheon
It shows relation among the position of
the load center, max. load and max. lifting
height.
If it has side moving and attachment,
the load decreases. If the lifting height
increases, the load decreases. Before
loading, check whether the load and the
center distance of load are in the allowed
range show in the diagram of load capacity.
If the shape of load is complicated, make
the most heavy part place in the center of
the fork and approach the stop fork frame.

15tight point labelonly for truck


exporting to Europe or option

16hand brake labelonly for truck


exporting to Europe or option

12warning label

17urgent stop label

W A R N I N G
EME

64

RG

STO
P

SERIOUS OR FATAL INJURY MAY RESULT TO YOURSELF OR OTHERS IF NOT FOLLOWED


This lift truck should not be operated by anyone who is not authorized and properly trained.
Read the Operators Manual and all warnings carefully,and make yourself familiar with your lift truck.
Operator's Manual and Service Manual are supplied with this truck or available from our forklift truck dealers.
Inspect and check your lift truck daily before and after use.Do not operate faulty or damaged lift trucks.
Repair work should be done by authorized and trained persons only.
To protect from falling objects,make sure that the Overhead Guard and Load Backrest Extension are correctly mounted
and in good condition.
Check the capacity of the battery and the condition of all kinds of switch,connecting plug,operating level, pedal,
tyre pressure and fastener.
Starting forklift truck:Realase parking brake and turn on the switch. After moving the shift lever to Forward
(or Reverse), depress the accelerator pedal to start truck. If making an error by procedure, the truck can not start.
When unloading, the weight and diemension should be within the permitted range on the capacity chart. Overload is
prohibited and set the cargo at the center of mast to avoid departure.
When traveling with loading, it is necessary to lift fork up to 300mm, tilt backward most and set the load closed
to the backrest. It is Pohibited to brake and turn suddently when travelling with loading.
Stop the truck steadily, turn the key to OFF position and remove it, move the shift level to "NEUTRAL" and set the
fork to ground.
When hoisting the battery case, it should take by four holes in the each side of the case. It is prohibited to hoist
only by two holes, otherwise, the case will be deformed to damage the battery.

EN CY

18noise labelonly for truck exporting


to Europe or option

LWA

19fuse labelonly for truck exporting


to Europe or option

USE SPECIFIED FUSES ONLY

65

15.The use, assembly and safe rules of attachment


HANGCHA will choose attachment that according with International standard ISO2328Forklift
pothook fork and install size of carriage,such as clamp, rotator, paper roll clamp, carrying ram,
side-shifter ect.
1Attachment use.
1 Know well the content of nameplate on attachment, read the instruction manual before
Usage.(Especially the manual from attachment company)Before operate the attachment, the people should
be trained and obtain the qualification.
(2) It should be understand the basic capability and operate methods of attachment. Especially the
admit load, lift height, size of cargo and adapt range of attachment.
3Operate the multi-functional attachment, such as with side-shifter, clamp or rotator, it is not
allowed that two action at one time. Operate one functional then do another one.
4Prohibit the cargo at a high position when truck move with attachment. If the size of cargo is too
big, prohibit the truck move on. Transport the cargeo, make sure that the distance of bottom of cargo and
ground is less than 300mm and mast incline back.
5The weight of cargo couldnt exceed the limited value of combination carrying capacity of
forklift and attachment. It is not allowed that partial load at high position. It is a short time work for
attachment with side-shifter. Partial load is around 100mm (Above 5 ton (including 5 ton),the side-shifter
movable within 300mm.
6In the range of the projection forth 2m of the lower of attachment and cargo, prohibit stand to
avoid the suddenness except the driver position under overhead.
7It is not allowed that an emergency brake in moving. Run slowly with load.
8Prohibit outside force when attachment working.
9It couldnt be use at malfeasance situation and overstep normal work range
10When the attachment failure, prohibit use without check.

Check and maintenance:


1Check the clearance of carriage beam and below catch of attachment if accord the attachment
manual.
2Check the rise catch is right on the flute of fork carriage.
3Use the auto currency lithic-grease per 500 hours to bearing surface.
4If the tighten firmware become flexible.
5Check the tie-in of hydraulic pressure loop, if tube attaint. Prohibit use after repair.
6Check the drive of attachment timing or turn the component if fray or block, change betimes.
7Check each element if in normal under load attachment is work in gear. If not, check the
hydraulic pressure loop, find out the broken part, change air poof or whole loop part.

66

2Attachment assembly
Caution
1Untempered technology licence of our company, any refit at safety and capability to attachment
is strict prohibit.
2Fact rating load capacity should be the least of rating load capacity, the load capacity of
attachment, colligate load capacity of truck. Generally speaking, the colligate load capacity of
truck is the least. Attachment load capacity just a count value of attachment pressure.
3Assembly go to in reason, credibility, safety to avoid the attachment glide around carriage in
using.
4After hang attachment, embed the rise catch block to the gap of top beam, let the offset of
centre line of attachment and carriage is less than 50mm.Otherwise,it will be affect the landscape
orientation stability of forklift.
5To these attachment with rotating function, such as paper roll clamp, bale clamp, muti-purpose
clamp, drum clamp, it needs to weld chock block in the joint of carriage beam and attachment to
prevent move from side to side in the operation.
6Assembly the attachment of below catch orientation, it need to adjust the clearance between
below catch and beam of carriage.

67

16.Related safety instruction and standard (for trucks exporting


to Europe or option)
The model by CE certification which according to the following instruction and standard:
DIRECTIVE 2006/42/EC OF THE EUROPEAN PAMENT AND OF THE COUNCIL,
DIRECTIVE 2000/14/EC OF THE EUROPEAN PAMENT AND OF THE COUNCIL,
EN1726-1:1998(Engineering Industry truck safety standardize), EN12053:2001,
EN1175-1:1998, EN13059:2002 coordinate standard.

Main safety factor will be according with DIRECTIVE 2006/42/EC OF THE


EUROPEAN PAMENT AND OF THE COUNCIL and EN1726-1:1998EN1175-1:1998
standard.
The design and manufacture of electrical element comply with the low voltage standard
2006/95/EC.

68

Noise will be according with EN12053:2001 and 2000/14/EC.


Vibration parameters are measured according to standards of ISO5349-2:2001,
EN13059:2002, ISO2631-1:1997, and the result meets the requirement of 2002/44/EC.
Electromagnetism compatibility is measured according to standard of EN12895:2000
and meets the requirement of 2004/108/EC.


Zhejiang Hangcha Engineering Machinery Co.,Ltd.
398 310022
Add398 Shi Qiao Road, Hangzhou 310022
Tel+86-571-88926666

Website: http//www.zjhc.cn
[email protected]
Fax +86-571-88144682

EC DECLARATION OF CONFORMITY
MANUFACTURE
Name:
Address:

Zhejiang Hangcha Engineering Machinery Co., Ltd.


398 Shiqiao Road, Hangzhou 310022, P. R. China

THE TECHNICAL DOCUMENTATION WAS COMPILED BY:


Name:
Address:
Post:

HEREBY DECLARES THAT THE PRODUCT DESCRIBED BELOW:


Description:
Name:
Model:
Serial number:
Manufacturing year:

Industrial truck Battery counterbalanced forklift truck with charger


Electrical forklift truck
Rated power:

kW

COMPLIES WITH THE PROVISIONS OF THE FOLLOWING EUROPEAN


DIRECTIVES:
2006/42/EC
2004/108/EC
2006/95/EC

Machinery Directive
EMC Directive
LVD Directive

COMPLIES WITH THE PROVISIONS OF THE FOLLOWING HARMONIZED


STANDARDS:
EN 1726-1:1998
+A1:2003

EN1175-1:1998
Annex I of Machinery
Directive 2006/42/EC
Done
(place):
On
(date):

at

Safety of industrial trucksSelf-propelled trucks up to and


including 10 000 kg capacity and industrial tractors with a
drawbar pull up to and including 20 000 N Part 1General
requirements
Safety of industrial trucksElectrical requirementsPart 1
General requirements for battery-powered trucks.
Essential health and safety requirements relating to the
design and construction of machinery

ZHEJIANG HANGCHA ENGINEERING


MACHINERY CO.,LTD.

Name
of
signatory:
Title:

the
Technical Director

Signature:

69

17.Maintenance record
Date

70

Maintain content

Maintainer

HANGCHA GROUP CO. , LTD.

Address for: OVERSEAS USERS


Manufacturing site: 88 Donghuan Road, LinAn Econimic Development zone,
Zhejiang, P.R.China
ZIP:311305
Registered Address398 Shi Qiao Road, Hangzhou, P.R. China) ZIP :310004
Fax: 0086-571-88926789,0086-571-88132890
Web: http://www.hcforklift.com
E-mail: [email protected]

You might also like